Commit Graph

2998 Commits

Author SHA1 Message Date
Guennadi Liakhovetski
19f1ba51c7 mmc: sh_mmcif: don't clear masked interrupts
Masking events on MMCIF means that an occurrence of the masked event
won't raise an interrupt, but the event bit will still be set in the
interrupt status register. If simultaneously a different event occurs
which was enabled, both flags will be set. However, only the unmasked
event bit should be cleared in the status register in such a case.

Clearing also the masked bit can lead to lost interrupts, which indeed
can be observed on the armadillo800eva r8a7740 board with an eMMC chip.
The problem has been introduced by the recent "mmc: sh_mmcif: simplify
IRQ processing" patch. Fix the problem by only clearing enabled interrupts.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Tested-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-06 07:40:48 -04:00
Guennadi Liakhovetski
b22ffdcd25 mmc: tmio: postpone controller reset during resume
When resuming, the tmio_mmc_host_resume() function is run when the
controller might still be powered down. Issuing a reset command to it at
that time has no effect. This patch postpones resetting the controller
until the first powering-up .set_ios() call.

Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-06 07:37:48 -04:00
Rafael J. Wysocki
45f0a85c82 PM / Runtime: Rework the "runtime idle" helper routine
The "runtime idle" helper routine, rpm_idle(), currently ignores
return values from .runtime_idle() callbacks executed by it.
However, it turns out that many subsystems use
pm_generic_runtime_idle() which checks the return value of the
driver's callback and executes pm_runtime_suspend() for the device
unless that value is not 0.  If that logic is moved to rpm_idle()
instead, pm_generic_runtime_idle() can be dropped and its users
will not need any .runtime_idle() callbacks any more.

Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle()
routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and
ata_port_runtime_idle(), respectively, as well as a few drivers'
ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has
been returned by the .runtime_idle() callback executed by it.

To reduce overall code bloat, make the changes described above.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2013-06-03 21:49:52 +02:00
Christian Daudt
0e74823429 mmc: sdhci: Add size for caller in init+register
Add a param to allow users of sdhci_pltfm to allocate private space
in calls to sdhci_pltfm_init+sdhci_pltfm_register. This is implemented
in the same way as sdhci does for its users.
 None of the users have been migrated yet and are passing in zero to
retain their private allocation.

- todo: migrate clients to using allocation this way
- todo: remove priv variable once migration is complete

Also removed unused variable in sdhci_pltfm_init fn

Signed-off-by: Christian Daudt <csd@broadcom.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-31 11:59:29 -04:00
Adrian Hunter
7396e318b4 mmc: sdhci-pci: support runtime PM for BYT SD cards
Add support for runtime PM for BYT SD cards.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:24 -04:00
Adrian Hunter
a61abe6eeb mmc: sdhci-acpi: support runtime PM for ACPI HID 80860F14 SD cards
Enable runtime PM for ACPI HID 80860F14 SD cards, adding support for
card detect GPIO.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:24 -04:00
Adrian Hunter
f0710a557c mmc: sdhci: add ability to stay runtime-resumed if the card is powered up
If card power is dependent on SD bus power then the host controller
must not be runtime suspended while the card is powered up.  Add
the ability to stay runtime-resumed in that case and enable it with a new
quirk SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:23 -04:00
Jingoo Han
113a87f868 mmc: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:23 -04:00
Al Cooper
ad82ab65d8 mmc: sdhci-pltfm: Allow drivers to set quirks2 from platform data
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:22 -04:00
Jingoo Han
5a942b6fee mmc: atmel-mci: add CONFIG_PM_SLEEP to suspend/resume functions
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following
build warning when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when
the CONFIG_PM_SLEEP is enabled.

drivers/mmc/host/atmel-mci.c:2509:12: warning: 'atmci_suspend' defined but not used [-Wunused-function]
drivers/mmc/host/atmel-mci.c:2539:12: warning: 'atmci_resume' defined but not used [-Wunused-function]

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:21 -04:00
Guennadi Liakhovetski
87ae7bbebd mmc: sdhi/tmio: add DT DMA support
Add support for initialising DMA from the Device Tree.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:21 -04:00
Guennadi Liakhovetski
eec95ee226 mmc: sdhi/tmio: switch to using dmaengine_slave_config()
This removes the deprecated use of the .private member of struct dma_chan
and switches the sdhi / tmio mmc driver to using the
dmaengine_slave_config() channel configuration method.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:20 -04:00
Guennadi Liakhovetski
03a0675b2a mmc: sdhi/tmio: make DMA filter implementation specific
So far only the SDHI implementation uses TMIO MMC with DMA. That way a DMA
channel filter function, defined in the TMIO driver wasn't a problem.
However, such a filter function is DMA controller specific. Since the SDHI
glue is only running on systems with the SHDMA DMA controller, the filter
function can safely be provided by it. Move it into SDHI.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:19 -04:00
Joonyoung Shim
fc79a4d6df mmc: dw_mmc: clear IDSTS register when initialize IDMAC
If pending interrupt for IDMAC exists when initialize IDMAC, it will
call interrupt handler unnecessarily.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:19 -04:00
Fredrik Soderstedt
6044371219 mmc: core: Fix select power class after resume
Use the saved values in card->ext_csd when selecting power class.
By doing this the power class will be selected even if mmc_init_card
is called with oldcard != NULL, which is the case after a suspend/resume.

Today ext_csd is NULL if mmc_init_card is called with oldcard != NULL
and power class will not be selected.

According to the eMMC specification the POWER_CLASS value is reset after
power failure, H/W reset assertion and any CMD0 reset.

Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com>
Reviewed-by: Johan Rudholm <jrudholm@gmail.com>
Acked By: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:18 -04:00
Ulf Hansson
07a6821608 mmc: core: Restructure and simplify code for mmc sleep|awake
The mmc_card_sleep|awake APIs are not being used since the support is
already properly encapsulated within the suspend sequence. Sleep|awake
command is also specific for eMMC.

We remove the sleep|awake bus_ops, the mmc_card_sleep|awake APIs and
move the code into the mmc specific core instead. This also includes
the mmc ops function, mmc_sleepawake. All releated functions have then
become static and we have got far less code to maintain.

Additionally this patch also simplifies the code from mmc_sleepawake,
since it is only used to put the card to sleep and not awake.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:17 -04:00
Ulf Hansson
c4d770d724 mmc: core: Support aggressive power management for (e)MMC/SD
Aggressive power management is suitable when saving power is
essential. At request inactivity timeout, aka pm runtime
autosuspend timeout, the card will be suspended.

Once a new request arrives, the card will be re-initalized and
thus the first request will suffer from a latency. This latency
is card-specific, experiments has shown in general that SD-cards
has quite poor initialization time, around 300ms-1100ms. eMMC is
not surprisingly far better but still a couple of hundreds of ms
has been observed.

Except for the request latency, it is important to know that
suspending the card will also prevent the card from executing
internal house-keeping operations in idle mode. This could mean
degradation in performance.

To use this feature make sure the request inactivity timeout is
chosen carefully. This has not been done as a part of this patch.

Enable this feature by using host cap MMC_CAP_AGGRESSIVE_PM and
by setting CONFIG_MMC_UNSAFE_RESUME.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:17 -04:00
Ulf Hansson
e94cfef698 mmc: block: Enable runtime pm for mmc blkdevice
Once the mmc blkdevice is being probed, runtime pm will be enabled.
By using runtime autosuspend, the power save operations can be done
when request inactivity occurs for a certain time. Right now the
selected timeout value is set to 3 s. Obviously this value will likely
need to be configurable somehow since it needs to be trimmed depending
on the power save algorithm.

For SD-combo cards, we are still leaving the enablement of runtime PM
to the SDIO init sequence since it depends on the capabilities of the
SDIO func driver.

Moreover, when the blk device is being suspended, we make sure the device
will be runtime resumed. The reason for doing this is that we want the
host suspend sequence to be unaware of any runtime power save operations
done for the card in this phase. Thus it can just handle the suspend as
the card is fully powered from a runtime perspective.

Finally, this patch prepares to make it possible to move BKOPS handling
into the runtime callbacks for the mmc bus_ops. Thus IDLE BKOPS can be
accomplished.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:16 -04:00
Ulf Hansson
12d01d0b81 mmc: core: Add bus_ops for runtime pm callbacks
SDIO is the only protocol that uses runtime pm for the card device
right now. To provide the option for sd and mmc to use runtime pm as
well the bus_ops callback are extended with two new functions. One for
runtime_suspend and one for runtime_resume.

This patch will also implement the callbacks for SDIO to make sure
existing functionality is maintained. It also prepares to move
away from using the mmc_power_restore_host API, since it is not
needed when using runtime PM.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:15 -04:00
Ulf Hansson
39b9431b0f mmc: core: Stop bkops for eMMC only from mmc suspend
Move mmc suspend specific operations to be executed from the .suspend
callback in the mmc bus_ops. This simplifies the mmc_suspend_host
function which is supposed to handle nothing but common suspend tasks.

Since eMMC can be considered non-removable there are no need to check
for ongoing bkops at PM_SUSPEND_PREPARE notification so remove it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:15 -04:00
Wei Yongjun
0c5ce16bc1 mmc: mxs-mmc: fix error return code in mxs_mmc_probe()
Fix to return -ENODEV in the request dma error case instead
of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:14 -04:00
Wei Yongjun
ef7aef9ab4 mmc: dw_mmc: fix error return code in dw_mci_probe()
Fix to return -ENOMEM in alloc workqueue error case instead
of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:13 -04:00
Maya Erez
775a9362b5 mmc: card: Adding support for sanitize in eMMC 4.5
The sanitize support is added as a user-app ioctl call, and
was removed from the block-device request, since its purpose is
to be invoked not via File-System but by a user.

This feature deletes the unmap memory region of the eMMC card,
by writing to a specific register in the EXT_CSD.

unmap region is the memory region that was previously deleted
(by erase, trim or discard operation).

In order to avoid timeout when sanitizing large-scale cards,
the timeout for sanitize operation is 240 seconds.

Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:13 -04:00
Ulf Hansson
b689167984 mmc: core: Re-use code for MMC_CAP2_DETECT_ON_ERR in polling mode
Previously the MMC_CAP2_DETECT_ON_ERR was invented for detecting
slow card removal. In was never a realy good solution and a proper
fix has been merged using gpio debouncing instead. We remove this
cap in this patch.

Although when using polling card detect mode, the code invented for
MMC_CAP2_DETECT_ON_ERR is re-used to complete card removal in an
earlier phase. There are no need waiting for the polling timeout to
elapse in this case.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:12 -04:00
Santosh Shilimkar
4a29b5591f mmc: omap_hsmmc: Skip platform_get_resource_byname() for dt case
MMC driver probe will abort for DT case because of failed
platform_get_resource_byname() lookup. Fix it by skipping resource
lookup byname for device tree build.

Issue is hidden because hwmod populates the IO resources which
helps to succeed platform_get_resource_byname() and probe.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:11 -04:00
Fredrik Soderstedt
810e08ee42 mmc: core: Only execute tuning for SDR50 and SDR104
Only execute tuning for sd and sdio devices that are using
SDR50 or SDR104.

Make sure clock is hold during tuning for sdio devices.

Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com>
Acked-by: Johan Rudholm <jrudholm@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:11 -04:00
Matt Porter
d272fbf0ca mmc: omap_hsmmc: convert to dma_request_slave_channel_compat
Convert dmaengine channel requests to use
dma_request_slave_channel_compat(). This supports platforms booting
with or without DT populated.

Signed-off-by: Matt Porter <mporter@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:10 -04:00
Tony Lindgren
cf5ae40b39 mmc: omap_hsmmc: Fix the DT pbias workaround for MMC controllers 2 to 5
Otherwise SDIO cards won't necessarily work when booted with
device tree as we will never power down the SDIO cards. This
means the SDIO card reset does not happen which at least some
WLAN controllers expect to happen with ifconfig wlan0 down.

The PBIAS voltage is only available for the first controller
instance, so let's limit the PBIAS workaround to the first
controller only.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 14:23:09 -04:00
Adrian Hunter
728ef3d193 mmc: sdhci-pci: add more device ids
Add three more PCI device ids.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 13:50:50 -04:00
Adrian Hunter
07a588837b mmc: sdhci-acpi: add more device ids
Add three more ACPI HIDs.  Also, as some devices must be
further distinguished by ACPI UID, slot information is now
associated with HID and UID.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 13:50:50 -04:00
Adrian Hunter
1d1ff45871 mmc: sdhci-acpi: fix initial runtime pm status
Initial runtime pm status is active.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 13:50:49 -04:00
Ludovic Desroches
8c964df07a mmc: atmel-mci: convert to dma_request_slave_channel_compat()
Use generic DMA DT helper. Platforms booting with or without DT populated
are both supported.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 13:32:13 -04:00
Lucas Stach
361b848202 mmc: sdhci-esdhc-imx: fix multiblock reads on i.MX53
The eSDHC controller on the i.MX53 needs an additional, non spec
compliant CMD12 after a multiblock read with a predefined number of
blocks. Otherwise the internal state machine won't go back to the
idle state.

This commit effectively reverts 5b6b0ad6 (mmc: sdhci-esdhc-imx:
fix for mmc cards on i.MX5), which fixed part of the problem by
making multiblock reads work, however this fix was not sufficient
when multi- and singleblock reads got intermixed.

This implements the recommended workaround (Freescale i.MX Reference
Manual, section 29.6.8 "Multi-block Read") by manually sending a
CMD12 with the RSPTYP bits cleared.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 13:13:31 -04:00
Martin Fuzzey
f6825748bd mmc: sdhci-esdhc-imx: Fix SDIO interrupts
Currently SDIO interrupts do not work on i.MX53 and maybe others.

This was observed with a Marvell 8787 based SDIO wifi adapter
using the mwifiex driver and firmware from the Marvell git
repository.
The symptom was a timeout after firmware download.

Observing the SDIO_DAT1 line showed that an interrupt was requested
(level 0) but no interrupt was generated in software, the line
stayed low until a timeout ocurred and the card was reset.

There is a Freescale errata
	ENGcm11186 "eSDHC misses SDIO interrupt when CINT is disabled"

The workaround suggested by this errata is already implemented and
involves clearing and then setting the D3CD bit in the host control
register [see esdhc_writel_le()]

However, when esdhc_writeb_le() is later used to write to
SDHCI_HOST_CONTROL it always resets the D3CD bit.

To fix this simply add the D3CD bit to the set of bits
not modified by esdhc_writeb_le().

Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26 13:10:36 -04:00
Ulf Hansson
0125962000 ARM: 7726/1: mmc: mmci: Add card_busy function to improve UHS card support
To verify a signal voltage switch at initialization of UHS cards the
.card_busy callback is used. For some of the ST-variants, card busy
detection on the DAT0 pin is supported.

We extend the variant struct with a busy_detect flag to indicate
support for it. A corresponding busy detect function, which polls the
busy status bit, is then set to the .card_busy callback.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:09:16 +01:00
Ulf Hansson
9cc639a20f ARM: 7725/1: mmc: mmci: Cache MMCIDATACTRL register
Add a cache variable in the host struct that reflects the current data in
the MMCIDATACTRL register. This patch will not introduce any functional
change but instead provide an easy option to keep specific bits in the
register between each data transfer.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:09:15 +01:00
Ulf Hansson
0f3ed7f75c ARM: 7724/1: mmc: mmci: Support signal voltage switch for UHS cards
Add .start_signal_voltage_switch callback to be able to support UHS cards.
The voltage switch requires the optional vqmmc regulator to exist since
the actual voltage switch will be performed directly on it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:07:38 +01:00
Ulf Hansson
7c0136ef77 ARM: 7721/1: mmc: mmci: Fixup regulator handling for vqmmc
We can not rely on regulator_is_enabled to decide whether to
enable|disable the regulator. It would mean that the reference
counter for it is not balanced properly.

Instead keep track of our internal state by using a new flag in
the host struct, so we can take correct decisions.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:07:07 +01:00
Lee Jones
1fd83f0ecf ARM: 7713/1: mmc: mmci: Allow MMCI to request channels with information acquired from DT
Currently, if DMA information isn't passed from platform data, then DMA
will not be used. This patch allows DMA information obtained though Device
Tree to be used as well.

Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:07:04 +01:00
Ulf Hansson
024629c62f ARM: 7719/1: mmc: mmci: Support for CMD23
Support added for transmission of CMD23 during multi block read or
write. In order to activate this feature, MMC_CAP_CMD23 flag needs
to be enabled in the capabilities field. Note that CMD23 support is
mandatory to support features like reliable write, data tag, context
ID, packed command.

This patch is based upon a patch from Saugata Das.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:07:03 +01:00
Ulf Hansson
c58a85090c ARM: 7718/1: mmc: mmci: Set actual clock for debug purpose
Update cclk to the acutal used value and copy it to the actual_clock
variable in the mmc host for debug purpose.

Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:07:01 +01:00
Ulf Hansson
665ba56fda ARM: 7717/1: mmc: mmci: Use devm_clk_get API
Converting to devm_clk_get simplifies error handling in probe
and we can remove other corresponding calls to clk_put.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23 00:07:00 +01:00
Linus Torvalds
d21572c515 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "A small number of fixes for stuff from the last merge window, and in
  one case (IRQ time accounting) the previous merge window."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7720/1: ARM v6/v7 cmpxchg64 shouldn't clear upper 32 bits of the old/new value
  ARM: 7715/1: MCPM: adapt to GIC changes after upstream merge
  ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
  ARM: 7712/1: Remove trailing whitespace in arch/arm/Makefile
  ARM: 7711/1: dove: fix Dove cpu type from V7 to PJ4
  ARM: finally enable IRQ time accounting config
2013-05-15 13:37:54 -07:00
Lee Jones
db90f91f6f ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checked
This patch suppresses the warning below:

drivers/mmc/host/mmci.c: In function ‘mmci_set_ios’:
drivers/mmc/host/mmci.c:1165:20: warning: ignoring return value of
        ‘regulator_enable’, declared with attribute warn_unused_result
        [-Wunused-result]

Cc: Chris Ball <cjb@laptop.org>
Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-10 14:44:17 +01:00
Linus Torvalds
292088ee03 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more vfs updates from Al Viro:
 "A couple of fixes + getting rid of __blkdev_put() return value"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc: Use PDE attribute setting accessor functions
  make blkdev_put() return void
  block_device_operations->release() should return void
  mtd_blktrans_ops->release() should return void
  hfs: SMP race on directory close()
2013-05-07 15:14:53 -07:00
Linus Torvalds
38f56f33ca ARM: arm-soc device tree changes, part 2
These are mostly new device tree bindings for existing drivers, as well
 as changes to the device tree source files to add support for those
 devices, and a couple of new boards, most notably Samsung's Exynos5
 based Chromebook.
 
 The changes depend on earlier platform specific updates and touch
 the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgjh2CrR//JCVInAQJTvRAAmxaeoI+kQ/pbbRDa/Mnhf+bUmQjvJvx4
 uFGYAAi23Txem2Bx6xrfvOo9//ATYSfRxenoSSOtXQucsnrqD0+837Sj2NbO6AB9
 MSiFDK4usJtGwSUybkSHNLb2QPBr8XTgmyWVE/sHEw2UtrIToC1n3sxFofFm0guT
 ReILKsgK0Wjyq5RntnjWOCHNNp6OGqDGvFXlSJqNA7Z6gR/VZy4o0oXS4Sv3TWgF
 zG7ngSG7/u9FP1IQnMr/SxY1T4QS/bBbAC1YvD/7X30DPHrWKR3/3LfLcsc9TUN2
 smTlZQjHdgBbGfVPL7JN0fQwA82HEjNSZKLJ0w9uFjxXgnoKT3znpUpQeuf3dsWm
 BhEFqN1Rf446S4ft2btBSB2nhX4NTlJ7w6z2F65xgaylgYFsGFTYcpjiOurKe3wF
 gGsw31DZdcuI4/LjiWbNGRKbMd7HFFLbFDMJ16TFbNcNr+pM3qpoQ6z3uMbfCBSe
 xFnYr+ESN8F2HXMNLiz3CTqLY+Fi/bHd22n3KuI9qsWws/0KDUrTvFh9Sm3kYji5
 QwwLl6PRoeFw8H29e3KrPsKoY/BGYAvrAetnC1o79cDFPLwUyii/1B6WwzC4ynfs
 K1VhwdVOwnp0sS/a2Pv8sZBpDNI07gwT9P20aiholxgREq2RKNXXVxGGFfK5Qvm9
 FG4Vp6EKEQ0=
 =G60S
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates (part 2) from Arnd Bergmann:
 "These are mostly new device tree bindings for existing drivers, as
  well as changes to the device tree source files to add support for
  those devices, and a couple of new boards, most notably Samsung's
  Exynos5 based Chromebook.

  The changes depend on earlier platform specific updates and touch the
  usual platforms: omap, exynos, tegra, mxs, mvebu and davinci."

* tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: add mshc controller node for Exynos4x12 SoCs
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM/dts: OMAP3: fix pinctrl-single configuration
  ARM: dts: Add OMAP3430 SDP NOR flash memory binding
  ARM: dts: Add NOR flash bindings for OMAP2420 H4
  ...
2013-05-07 11:06:17 -07:00
Al Viro
db2a144bed block_device_operations->release() should return void
The value passed is 0 in all but "it can never happen" cases (and those
only in a couple of drivers) *and* it would've been lost on the way
out anyway, even if something tried to pass something meaningful.
Just don't bother.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-07 02:16:21 -04:00
Linus Torvalds
173192958d MMC highlights for 3.10:
Core:
  - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up()
    at boot/initialization time if it's already happened, for performance
    (faster boot time) reasons.
  - Fix a bit width test failure that resulted in old eMMC cards being put
    into 1-bit mode when 4-bit mode was available.
  - Expose fwrev/hwrev for MMCv4 parts.
  - Improve card removal logic in the case where the card's removed slowly;
    we were missing card removal events if the card retained contact with
    the slot pads for long enough to reply to a CMD13 while being removed.
 
 Drivers:
  - davinci_mmc: Support using PIO instead of DMA.
  - dw_mmc: Add support for Exynos4412.
  - mxcmmc: DT support, use slot-gpio API.
  - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support.
  - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
     SiRFprimaII: unicore ARM Cortex-A9
     SiRFatlas6: unicore ARM Cortex-A9
     SiRFmarco: dual core ARM Cortex-A9 SMP
  - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse().
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRfr+qAAoJEHNBYZ7TNxYMG90QALW6ArdTxkfNKNybCx/s3ttm
 hyP2BB9eXF/FbZ9bGHGuv9NXV/4YZ4yr4c3yV4paOMW3s0z/+IhqajLfCgPFPCGK
 MOk5GAStN/+znBjLy+5V/17EJuVpE+WVwUqDg3RafB8NGQtaClymwPg6R+SMWwL9
 uiRcCVgmgzlk9l+4Z1p9wHUeQlhZQ/Okzj4CjkOpWfgsUpo0PcWQRosd+CHHirWz
 iWnhFBM1cP4Nj59ashYSedu797s29pKGd31JcuWWQE228iykGfcCJWzMr9YMiU6x
 LwESeuTST8b9HblI7WYnFvpVvD9qTuBkkKMIKMNb4E34xBf8+H2zUh1hK7iEnDXt
 W0F1xy3WsxpJ1yF0BY9SqqnNeLpJBOenHlTZfGlf5r+kHWYUUQvvqw/ZdmWStRgv
 mSoqXSmz/oM3rn1KjMritJ9oyr0EH8kHDMAsoiCF0EuGipmenFTdJJiwbh0JZJxK
 bjqPUROtSK8TdPvTw1BPRX5YtJLzsG4HdsI3C8W05BTbCL9iIE1NaWP27nikPVfq
 glt9EilzgR252Wc649OrB7JAHBZjlVFIndNzjziGdxNzH6m1AK05qxTL5hBvba99
 plccrsVMDGWLSmsGVwz7Eo+TLflRCdtrE+7O4NrlydZzp2t24HZrMc9rN8GDWQQE
 dP91YUdpDYrTsUBKiKGQ
 =Pr7P
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.10:

  Core:
   - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping
     mmc_power_up() at boot/initialization time if it's already
     happened, for performance (faster boot time) reasons.
   - Fix a bit width test failure that resulted in old eMMC cards being
     put into 1-bit mode when 4-bit mode was available.
   - Expose fwrev/hwrev for MMCv4 parts.
   - Improve card removal logic in the case where the card's removed
     slowly; we were missing card removal events if the card retained
     contact with the slot pads for long enough to reply to a CMD13
     while being removed.

  Drivers:
   - davinci_mmc: Support using PIO instead of DMA.
   - dw_mmc: Add support for Exynos4412.
   - mxcmmc: DT support, use slot-gpio API.
   - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property
     support.
   - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs:
       SiRFprimaII: unicore ARM Cortex-A9
       SiRFatlas6: unicore ARM Cortex-A9
       SiRFmarco: dual core ARM Cortex-A9 SMP
   - sdhci-tegra: Add support for Tegra114 platforms, use
     mmc_of_parse()"

* tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits)
  mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE
  mmc: core: fix init controller performance regression, updated patch
  mmc: mxcmmc: enable DMA support on mpc512x
  mmc: mxcmmc: constify mxcmci_devtype
  mmc: mxcmmc: use slot-gpio API for write-protect detection
  mmc: mxcmmc: add mpc512x SDHC support
  mmc: mxcmmc: fix race conditions for host->req and host->data access
  mmc: mxcmmc: DT support
  mmc: dw_mmc: let device core setup the default pin configuration
  mmc: mxs-mmc: add broken-cd property
  mmc: mxs-mmc: add non-removable property
  mmc: mxs-mmc: add cd-inverted property
  mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
  mmc: mxcmmc: Fix bug when card is present during boot
  mmc: core: fix performance regression initializing MMC host controllers
  Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully"
  mmc: atmel-mci: pio hang on block errors
  mmc: core: Fix bit width test failing on old eMMC cards
  mmc: dw_mmc: Use pr_info instead of printk
  mmc: dw_mmc: Check return value of regulator_enable
  ...
2013-05-04 13:45:17 -07:00
Linus Torvalds
99c6bcf46d ARM: arm-soc multiplatform updates for 3.10
More multiplatform enablement for ARM platforms. The ones converted in
 this branch are:
 - bcm2835
 - cns3xxx
 - sirf
 - nomadik
 - msx
 - spear
 - tegra
 - ux500
 
 We're getting close to having most of them converted!
 
 One of the larger platforms remaining is Samsung Exynos, and there are
 a bunch of supporting patches in this merge window for it. There was a
 patch in this branch to a early version of multiplatform conversion,
 but it ended up being reverted due to need of more bake time. The
 revert commit is part of the branch since it would have required
 rebasing multiple dependent branches and they were stable by then.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgg99AAoJEIwa5zzehBx3n78P/j0w/8v+F4dM29ba5M/tqbFI
 e3wpeFykZ/HJH+FFIEYfIablpfHsLB0LEMh0dZmwHESFC6eR0RfGL2jOkpfcH9Ne
 7B/JIFN4l1iwqqKCXf+QbYL6e8YFxlJkg6BIB4KhNgliQoO/ASP/8EbcgROYuxmN
 KPVdw9laUCCvb5Ogh2NWVAkBHhVGAEiqK20r4TQz8alI8RUmMleWM3o+wLBWVhOO
 d3gtYSfuFSbrJfbpKSdycLizoV/NekdOC1A9Ov9YuOdw8DzNbrThCRQtu0tIUgxN
 JjfnGlEJLsJS9SESfr8SYWxTuhe/lB2dGqjQPvRtl2HGBhbtTlnWfQ0k2ZHdeJuD
 J50SLrGA2gN9E5PlHJXjYk8uhhGIq8bNTJ//CtDkfKTq1D7PuHVEpEctsaz3BBbM
 U+x9zP2v4FB+yrZu8w+gkQY/wDgHsxj08mT6BK0+l8ePdyQV22CvwmM5XlJFI03x
 5J0nLYiYfef+ZN9rGgVrQbn+yv+IEkE4DmeiscjeVJE5LVdVrDpYGfx7UA7V0UA7
 i3KRVpNKuy1v7GJDnKlEBPkmB+vgXTRXUPDVCuC4n0Hi5PYj4es1gY6AoXGF90wm
 vtKxGr/2XDLP7Ro+m0OXMttSgQShnmbrbOngfkWcFwUmG7cB3SSUUOGKM+2LNnXM
 MJTqVhPjkZ2GYBi/J6S/
 =4hSo
 -----END PGP SIGNATURE-----

Merge tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform updates from Olof Johansson:
 "More multiplatform enablement for ARM platforms.  The ones converted
  in this branch are:

   - bcm2835
   - cns3xxx
   - sirf
   - nomadik
   - msx
   - spear
   - tegra
   - ux500

  We're getting close to having most of them converted!

  One of the larger platforms remaining is Samsung Exynos, and there are
  a bunch of supporting patches in this merge window for it.  There was
  a patch in this branch to a early version of multiplatform conversion,
  but it ended up being reverted due to need of more bake time.  The
  revert commit is part of the branch since it would have required
  rebasing multiple dependent branches and they were stable by then"

* tag 'multiplatform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
  clocksource: nomadik-mtu: fix up clocksource/timer
  Revert "ARM: exynos: enable multiplatform support"
  ARM: SPEAr13xx: Fix typo "ARCH_HAVE_CPUFREQ"
  ARM: exynos: enable multiplatform support
  rtc: s3c: make header file local
  mtd: onenand/samsung: make regs-onenand.h file local
  thermal/exynos: remove unnecessary header inclusions
  mmc: sdhci-s3c: remove platform dependencies
  ARM: samsung: move mfc device definition to s5p-dev-mfc.c
  ARM: exynos: move debug-macro.S to include/debug/
  ARM: exynos: prepare for sparse IRQ
  ARM: exynos: introduce EXYNOS_ATAGS symbol
  ARM: tegra: build assembly files with -march=armv7-a
  ARM: Push selects for TWD/SCU into machine entries
  ARM: ux500: build hotplug.o for ARMv7-a
  ARM: ux500: move to multiplatform
  ARM: ux500: make remaining headers local
  ARM: ux500: make irqs.h local to platform
  ARM: ux500: get rid of <mach/[hardware|db8500-regs].h>
  ...
2013-05-02 09:38:16 -07:00
Linus Torvalds
97b1007a29 ARM: arm-soc platform updates for 3.10, part 1
This branch contains platform updates for 3.10. Among the highlights:
 
 - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
 - New support for CSR SiRFatlas6 SoCs
 - A handful of updates for NVidia T114 (a.k.a. Tegra 4)
 - A bunch of updates for the shmobile platforms
 - A handful of updates for davinci
 - A few updates for Qualcomm MSM
 - Plus a handful of other patches, defconfig updates, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRgg+LAAoJEIwa5zzehBx3ePcP/3NUsSOTRQ2SZIVpyjnWOhkf
 RMZiRaVsxrY0BPfDB9E2Vcb6lannKmACTujs/Ux7kJC22BreuFM1PnZoDfhkRuSE
 n/nVB1981XJS82z2uONRSZGlUPSGWYzhTTUDJ0nHiBGmIGf5ctnC0iYWp3As3lv9
 kNY14H7NkwQ4zBVNEMu7WfW8d2IJgqZJgR9xhZPv5fOZ+LlQmK6VaHWTmQtjyea1
 bG1qoJ0dPbfJB4Vnr3a49rBkSJxZUiv8xQucw9+vo+ADRi64M4sZ1Jj2vVyDpqZp
 F4fxBNMVvg7xM0TcBbItFFYJBXlUjeT4z+UI5iYjkbnE7EV9ndFeZXHCWX1qzOSy
 X/nrJKuoe7ISQanBE9SHS9DpDGlkPDO0Mn0vb1f2VUQOY513pt/D1iFYEucZ6WCN
 fWUYtvt5GayidUr55D1U8ssbE0oGt2rizd9x7GUk4KbRVAnUUNopIQAhXrefTrZm
 jfdZNDckJ2F3aq8IPjsKuyJTpe61xD4Wvb3P/pEE3Q8fowPF5WIxXV+qjqHQ9vtt
 Tz4LkP/YdynVFGmhOwz3QZmPaQItaabaYyCcZ5cVCvt5mdxx5VuHYppafhCPJz+V
 KCQpKi1azuIv+sDR+nlGOl6+Ideea3s7TsRudfbmQFp5GsqkqOdJzR9gbbKmJauQ
 4JPpRd+4W8wC8zXQnhVY
 =HXX3
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "This branch contains part 1 of the platform updates for 3.10.  Among
  the highlights:

   - Support for the new Atmel Cortex-A5 based platforms (SAMA5D3)
   - New support for CSR SiRFatlas6 SoCs
   - A handful of updates for NVidia T114 (a.k.a. Tegra 4)
   - A bunch of updates for the shmobile platforms
   - A handful of updates for davinci
   - A few updates for Qualcomm MSM
   - Plus a handful of other patches, defconfig updates, etc."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (135 commits)
  ARM: tegra: pm: fix build error w/o PM_SLEEP
  ARM: davinci: ensure global variables are declared
  ARM: davinci: sram.c: fix incorrect type in assignment
  ARM: davinci: da8xx dt: make file local symbols static
  ARM: davinci: da8xx: add remoteproc support
  ARM: socfpga: Upgrade clk driver for socfpga to make use of dts clock entries
  ARM: socfpga: Add clock entries into device tree
  ARM: socfpga: Enable soft reset
  ARM: EXYNOS: replace cpumask by the corresponding macro
  ARM: EXYNOS: handle properly the return values
  ARM: EXYNOS: factor out the idle states
  ARM: OMAP4: Enable fix for Cortex-A9 erratas
  ARM: OMAP2+: Export SoC information to userspace
  ARM: OMAP2+: SoC name and revision unification
  ARM: OMAP2+: Move common part of late init into common function
  ARM: tegra: pm: remove duplicated include from pm.c
  ARM: davinci: da850: override mmc DT node device name
  ARM: davinci: da850: add mmc DT entries
  mmc: davinci_mmc: add DT support
  ARM: SAMSUNG: check processor type before cache restoration in resume
  ...
2013-05-02 09:31:45 -07:00
Linus Torvalds
a7726350e0 ARM: arm-soc cleanup for 3.10
Here is a collection of cleanup patches. Among the pieces that stand out are:
 
 - The deletion of h720x platforms
 - Split of at91 non-dt platforms to their own Kconfig file to keep them separate
 - General cleanups and refactoring of i.MX and MXS platforms
 - Some restructuring of clock tables for OMAP
 - Convertion of PMC driver for Tegra to dt-only
 - Some renames of sunxi -> sun4i (Allwinner A10)
 - ... plus a bunch of other stuff that I haven't mentioned
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRggUqAAoJEIwa5zzehBx3HjEQAJwp7heRs/HwTDzmzcyHkRMV
 usbaa9dHBuAZ0DzsWjLK99xEn8VWD9TvbeP6hN5gNhxko06UVza3o8PI2iV1ztMB
 9K3u2+LS5on/5cOxnsU1va16h5hBZ0ZIgNx5NY+PZ5mBY6v1U3qTjljPP62iXp63
 w+sdXeZDe/c5JvuoDRbY0OBR++3Jp8cQg7KbU78jWz3r5D2rC1zwhkf2audcRY6b
 jIWTj9M8CHynh/D6OzKqDcOYorBHNSRj0YbiWS2nnMfm+0V8nya00EPRpCPRiBUb
 sobSy1CI9Qxiih3bOf6QCfzCRzJ5hbtE0zlI8g3bqtEZ1yOsE949HrKapWHJJdIU
 JNTXrxXORAnaRhbzvSPNpp/iJBSDQRsfEETgv5BuHg/4lzTQfzElySbcgb4EeoHr
 7Zt8ZR2/Du+u76qIPqs19ES3Wx+nOEOfSDAgZmlfPvlwmlGDYvqAXoeJ006VXnhG
 JacLuD/cFnJ1w00Bcl48ZXMIsVkoRqjvsCG5q688HGXMM1lU8DfgUpQY6OCWAbdu
 kFnBinJZk+HbE8FGS8O0BoQ+oiC0YIr2XhATL66PGHq7bLHb5ycwvZ7mrfC0AN9j
 M9hqTFednwfo9wF8vSj5nMsxXwP8/mky4ECGoFvLsMYDosunrNVnAHtTgDSE+ZgO
 6kQJ1P8jBBXn2LyjF88W
 =xCAx
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanup from Olof Johansson:
 "Here is a collection of cleanup patches.  Among the pieces that stand
  out are:

   - The deletion of h720x platforms
   - Split of at91 non-dt platforms to their own Kconfig file to keep
     them separate
   - General cleanups and refactoring of i.MX and MXS platforms
   - Some restructuring of clock tables for OMAP
   - Convertion of PMC driver for Tegra to dt-only
   - Some renames of sunxi -> sun4i (Allwinner A10)
   - ... plus a bunch of other stuff that I haven't mentioned"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (119 commits)
  ARM: i.MX: remove unused ARCH_* configs
  ARM i.MX53: remove platform ahci support
  ARM: sunxi: Rework the restart code
  irqchip: sunxi: Rename sunxi to sun4i
  irqchip: sunxi: Make use of the IRQCHIP_DECLARE macro
  clocksource: sunxi: Rename sunxi to sun4i
  clocksource: sunxi: make use of CLKSRC_OF
  clocksource: sunxi: Cleanup the timer code
  ARM: at91: remove trailing semicolon from macros
  ARM: at91/setup: fix trivial typos
  ARM: EXYNOS: remove "config EXYNOS_DEV_DRM"
  ARM: EXYNOS: change the name of USB ohci header
  ARM: SAMSUNG: Remove unnecessary code for dma
  ARM: S3C24XX: Remove unused GPIO drive strength register definitions
  ARM: OMAP4+: PM: Restore CPU power state to ON with clockdomain force wakeup method
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
  ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
  ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
  ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
  ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
  ...
2013-05-02 09:03:55 -07:00
Linus Torvalds
4d26aa3054 ARM: arm-soc non-critical fixes for 3.10
Here is a collection of fixes (and some intermixed cleanups) that were
 considered less important and thus not included in the later parts of
 the 3.9-rc cycle.
 
 It's a bit all over the map, contents wise. A series of ux500 fixes
 and cleanups, a bunch of various fixes for OMAP and tegra, and some for
 Freescale i.MX and even Qualcomm MSM.
 
 Note that there's also a patch on this branch to globally turn off
 -Wmaybe-uninitialized when building with -Os. It's been posted several
 times by Arnd and no dissent was raised, but nobody seemed interested
 to pick it up. So here it is, as the topmost patch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRggtQAAoJEIwa5zzehBx3TmYP/i4Kt3JDYEbYyAqNsH3nb0mN
 3kLwViUxDdS/aZCXEaNYLwZBUgl1Zyz3oRd39zFCo4dRM2uG1AW+lC73AP3/eW6n
 2oHxI43xzwjDNPxRkiipB4NXPyIoIdbRXM6/QIxXzM9zD3MJXj7BpBBpDgGAsLov
 BQ2r28idxZE6jB4puPjVZCuyG5UMjA0Ko2Fp2em7QXarQBBscDvhAtjqNZ3JPtlN
 thASsou1B8805J7jf5G8Wz6fNeVJg2wlWMgE9ywJpKFbut4cGM4riS/QvB0fTe6d
 tmkCae0bw3UD+D+N1gYcZpeGve8oPSHbeyhrSPAfI/wAVBh0J397MgJW5/f0vW8p
 DffLjQI+S450Kw0Bab41Tn0JnMnXtYUo56yjemdxa/NQJF34ycBFQ3HOm6nFxo7U
 6tce2O775uvG0+rJfDbX6M+Mu7QoIi0p8sOdg0/W+pFK08xvaezsOc1NjqTvuYoC
 s/2LYiIJqVG6tFVU0i/46duQhdp0I/Oj7wXtFXH0ZvZPBz0cDaSU3irB3QA9pNt5
 PI6JEBg0FUPUork24gShSUf7un4Itrjlq20HTkC9/z1skx87PbB3Wa7A8jnHeFme
 tpuPRvmfBWhIhp06AIA8znhDik9xuJ4B7ypsFNM0VyoV/qx+TSIHbViVQuwcOf9b
 nAidtuhMjE+P2sAu+VGU
 =bzsu
 -----END PGP SIGNATURE-----

Merge tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical fixes from Olof Johansson:
 "Here is a collection of fixes (and some intermixed cleanups) that were
  considered less important and thus not included in the later parts of
  the 3.9-rc cycle.

  It's a bit all over the map, contents wise.  A series of ux500 fixes
  and cleanups, a bunch of various fixes for OMAP and tegra, and some
  for Freescale i.MX and even Qualcomm MSM.

  Note that there's also a patch on this branch to globally turn off
  -Wmaybe-uninitialized when building with -Os.  It's been posted
  several times by Arnd and no dissent was raised, but nobody seemed
  interested to pick it up.  So here it is, as the topmost patch."

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (70 commits)
  Turn off -Wmaybe-uninitialized when building with -Os
  ARM: orion5x: include linux/cpu.h
  ARM: tegra: call cpu_do_idle from C code
  ARM: u300: fix ages old copy/paste bug
  ARM: OMAP2+: add dependencies on ARCH_MULTI_V6/V7
  ARM: tegra: solve adr range issue with THUMB2_KERNEL enabled
  ARM: tegra: fix relocation truncated error when THUMB2_KERNEL enabled
  ARM: tegra: fix build error when THUMB2_KERNEL enabled
  ARM: msm: Fix uncompess.h tx underrun check
  ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms
  ARM: cpuimx27 and mbimx27: prepend CONFIG_ to Kconfig macro
  ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
  ARM: OMAP1: remove "config MACH_OMAP_HTCWIZARD"
  ARM: mach-imx: mach-imx6q: Fix sparse warnings
  ARM: mach-imx: src: Include "common.h
  ARM: mach-imx: gpc: Include "common.h"
  ARM: mach-imx: avic: Staticize *avic_base
  ARM: mach-imx: tzic: Staticize *tzic_base
  ARM: mach-imx: clk: Include "clk.h"
  ARM: mach-imx: clk-busy: Staticize clk_busy_mux_ops
  ...
2013-05-02 08:56:55 -07:00
Mark Brown
2fdfe1c26f mmc: sdhci-s3c: Fix operation on non-single image Samsung platforms
Commit cc014f3 (mmc: sdhci-s3c: remove platform dependencies) changed
the platform dependency in Kconfig to depend on SAMSUNG_SINGLE, meaning
the driver was available only on single zImage Samsung platforms.  This
breaks platforms that haven't been converted such as S3C64xx.  Revert
that part of the change to fix.

[arnd: CONFIG_SAMSUNG_SINGLE was actually introduced only for
non-multiplatform configurations, but was subsequently removed,
which means the driver was now broken both for single- and multi-
platform. The dependency was there by accident anyway, so reverting
this is still the correct solution]

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-30 16:44:43 +02:00
Akinobu Mita
2e744fcb90 mmc: rename random32() to prandom_u32()
Use preferable function name which implies using a pseudo-random
number generator.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:42 -07:00
Linus Torvalds
507ffe4f38 TTY/Serial driver update for 3.10-rc1
Here's the big tty/serial driver merge request for 3.10-rc1
 
 Once again, Jiri has a number of TTY driver fixes and cleanups, and
 Peter Hurley came through with a bunch of ldisc fixes that resolve a
 number of reported issues.  There are some other serial driver cleanups
 as well.
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlF+nSMACgkQMUfUDdst+ymy9QCfRmYn0MC0W+Q1D3Spz87gVsuo
 cqEAniu1BEkYZpjAz7ZlIN07Ao0jbQOR
 =Osu/
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver update from Greg Kroah-Hartman:
 "Here's the big tty/serial driver merge request for 3.10-rc1

  Once again, Jiri has a number of TTY driver fixes and cleanups, and
  Peter Hurley came through with a bunch of ldisc fixes that resolve a
  number of reported issues.  There are some other serial driver
  cleanups as well.

  All of these have been in the linux-next tree for a while"

* tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits)
  tty/serial/sirf: fix MODULE_DEVICE_TABLE
  serial: mxs: drop superfluous {get|put}_device
  serial: mxs: fix buffer overflow
  ARM: PL011: add support for extended FIFO-size of PL011-r1p5
  serial_core.c: add put_device() after device_find_child()
  tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
  serial: sccnxp: Replace pdata.init/exit with regulator API
  serial: sccnxp: Do not override device name
  TTY: pty, fix compilation warning
  TTY: rocket, fix compilation warning
  TTY: ircomm: fix DTR being raised on hang up
  TTY: synclinkmp: fix DTR being raised on hang up
  TTY: synclink_gt: fix DTR being raised on hang up
  TTY: synclink: fix DTR being raised on hang up
  serial: 8250_dw: Fix the stub for dw8250_probe_acpi()
  serial: 8250_dw: Convert to devm_ioremap()
  serial: 8250_dw: Set port capabilities based on CPR register
  serial: 8250_dw: Let ACPI code extract the DMA client info
  serial: 8250_dw: Support clk framework also with ACPI
  serial: 8250_dw: Enable runtime PM
  ...
2013-04-29 12:16:17 -07:00
Arnd Bergmann
e4404fab2e mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE
The symbol referenced in MODULE_DEVICE_TABLE must match the actual
table, otherwise we get a build error like:

sdhci-tegra.c:206:34: error: '__mod_of_device_table' aliased to
undefined symbol 'sdhci_dt_ids'

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-23 15:05:57 -04:00
Arnd Bergmann
56b690481c Merge branch 'samsung/exynos-multiplatform' into next/multiplatform
These patches get us closer to adding multiplatform support on
the Exynos platform, they are part of a longer series of
patches.  This would get all the simple stuff out of the
way, and I don't think there is a big risk of introducing
regressions with these.

A lot of the other patches have already been merged into
subsystem trees. After this series in in arm-soc, what is
left comes down to

* The ASoC conversion to dmaengine won't make it unless someone
  who knows that code better steps up to do it right away. This
  means that we won't have audio in a 3.10 multiplatform kernel
  on Exynos, but it will still work for users that don't enable
  multiplatform.

* The irqchip (combiner), clk and clksource patches are all based
  on top   of other changesets we pulled in from your trees, so I
  would not make them part of the next/multiplatform branch. We can
  apply them on top of the next/drivers branch once they are
  tested successfully.

* A trivial patch is needed in the end to actually make
  CONFIG_ARCH_EXYNOS visible in multiplatform configurations.
  We will do that as a separate patch once everything else is
  there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 14:33:09 +02:00
Arnd Bergmann
cc014f3e29 mmc: sdhci-s3c: remove platform dependencies
plat/regs-sdhci.h is not used anywhere but in the sdhci-s3c
driver, so it can become a local file there and all other
inclusions removed.

plat/sdhci.h is used only to define the platform devices,
and with the exception of the platform_data structure not
needed by the driver, so we can split out the platform_data
definition instead and leave the rest to platform code.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Ball <cjb@laptop.org>
2013-04-19 13:51:23 +02:00
Olof Johansson
c8bf98a28f v3.10 DT updates for DaVinci
This set of patches adds support for PWMs and SPI
 controller present on DA850 and for SPI flash present on
 DA850 EVM.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJRbtMZAAoJEGFBu2jqvgRNiGwP+gPdSZc7aroAiV7C9wNg0cJ7
 D2Z4O0ZnsjeBgGlPYEVWLeqYIuTR1fa2Z1R8MMsb2GbQiSAZOd3Eg8Crto+SlFN4
 T71rbomaNnt96nXupmX5+6+aE1moA8QoneySAxMgWBiROt8ZPVrlKnlzVmJQnwiY
 r5INF76TOLCTtDZLPkyVWuMuLAt5hHnI6ihSdfmfK4DUavpwo7FynYVGl2bMGZOw
 i3gpICOoODbypLYraIDZg4o0vdVzlvjm03rvoplWRO84Aa10pINAhZ76fnQqDFPm
 USfqHDXXmF4mwYFzKSlnY159Dha74LGRJcb7+PLmpKZtvFbTwJ92GyZLZq5YpSjD
 bfPZ4hhJZqzG2PCaLwUvuD7352nuT5+05P+yGDHxeTxStqPGZcxxrPoQKISh82Mz
 gCB+B6hYsxFhaJ0A0lmCmpxmOnytiJVuHAtgAbPWOhDjqwRC1g4xnNyoZDoIquOe
 8KKTqKojtG7O4st8UuE4+SB0OyJYk2nDhpsDXyY5F5z71eVOGYp4cj9avOhN+9zO
 0DuQkeX1BhUfspSU5sZqMABLvpVvtwckMnDy95bEvBBxUyx/tunigX3Eg5nhGu/j
 K894RtsziYKXcq50RlAp+RvpBoizrm4E3iBfxk3PlO74nbFp4AMgUcrHAz90QUGE
 Q4/hKwIc+wbTPSRzQs3V
 =KZ+c
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt2

From Sekhar Nori:
v3.10 DT updates for DaVinci

This set of patches adds support for PWMs and SPI
controller present on DA850 and for SPI flash present on
DA850 EVM.

* tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM: davinci: da850: override mmc DT node device name
  ARM: davinci: da850: add mmc DT entries
  mmc: davinci_mmc: add DT support
  ARM: davinci: da850: add tps6507x regulator DT data
  ARM: regulator: add tps6507x device tree data
  ARM: davinci: remove test for undefined Kconfig macro
  ARM: davinci: mmc: derive version information from device name
  ARM: davinci: da850: add ECAP & EHRPWM clock nodes
  ARM: davinci: clk framework support for enable/disable functionality

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-17 23:51:31 -07:00
Adrian Hunter
a08b17be8b mmc: core: fix init controller performance regression, updated patch
Add MMC_CAP2_NO_PRESCAN_POWERUP to sdhci-pci.c also, use mmc_power_off()
for MMC_CAP2_NO_PRESCAN_POWERUP.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
[cjb: previously applied v1 of this patch instead of v4]
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-15 11:27:25 -04:00
Olof Johansson
5ed3ebe3be Cleanups for MSM for 3.10
These are some patches for various parts of MSM that gradually bring
 us closer to being part of single zimage.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRaImzAAoJEOa6n1xeVN+CBYQQALoydAc36RZ0WK5Ksz77bv0r
 jv8jSu6XyorjI+OJAeGOCUuotpa8nLnhBmwOtgM2Sd83hA/voIUt1olc1skO/Ahb
 MSwHCWrHicGrq8RPrWmhRRlAGG4394p3wfro58QAlxh/Wgi8AHzXfR+ahlBCU23F
 Dj2BFh+INx8h/A6H1BzZWUwvjVWThLAqcPfsAovyEH7//DLJP4Mbd3KhUeqtFrWO
 nrh05ymss5PgElxdZQP8eowVsTEXcsQGn0IoXmGtxhBSvAKxw6pnrL3/e29f1poM
 A9/Ci+qgMXW6TjjBdxID/MWzeL1v/Om1xJ7DI6be1D5PqodZpCWkh5mKJwaI0Q2j
 U6aobtRiV/wEUq7iWFMVzCywQIGua7/wfh6PshTMtOjHNXOn9mAh1bCrv9wKUt+D
 VkkCzx6dnpjQv3hDQ4wdz2R8hsXj/8NEV48g+NwFWaDpKJgVQA92sWpIjNdaDsk+
 OzWC5gkMpCE7/SmEaClcyybjuA4N+W7Tan4zQot0mlXZzuuSAIhXIfRnR+OiExnY
 jsQSfxyWGUm9yR4kJdJjcyYM+IvKEq4Tm7oyPH551qs7Ww8TxUgcJhPdevN0eFBM
 cvljVzU54zZo9S08No14lp7LvRbM+o3/wphz9/NZijgpFGw24W1kj85Pa2ywQhzs
 zn5Qqg5adOGS/R/v+PaD
 =rBJL
 -----END PGP SIGNATURE-----

Merge tag 'msm-cleanup-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/cleanup

From David Brown:
Cleanups for MSM for 3.10

These are some patches for various parts of MSM that gradually bring
us closer to being part of single zimage.

* tag 'msm-cleanup-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm:
  ARM: msm: Remove unused cpu.h header file
  gpio: Make gpio-msm-v1 into a platform driver
  mmc: msm_sdcc: Remove unnecessary include
  ARM: msm: Move dma.h #defines that are private to dma.c

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-14 20:41:39 -07:00
Olof Johansson
bf049ded36 update device tree for exynos4 and exynos5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRYvOSAAoJEA0Cl+kVi2xqSxAQAKYKxx8PRNweKw3IeqIRQ+gs
 Ia+0ZkHqPgoD/ezASGUmaTDGvAGVlNFqFTpzYiCLqFII5O4NzjFO9BfwE80PxaDe
 I/tcofrU6aWNfYtT/0YsrvcdqVsSNxJwPBxfpEHyCK+4xoXsV6xJV0IpvE/u9bNT
 2hLMfGndPkeTTqk7H3MpdJVB5DZOnE6LEwFVz1hVpBcCoQPJnpltIAGs/m4Rri7p
 hlgdHxKAqo+VUcmmcP3HanylFvWwbJdtemdgPXTalzOFTZJ16RFJ3+ylRf7PbWjK
 zVmjg7tFCmuAnh6HQTdm4hsnIohkL/GJfJClvNS52xL8ovfVWvjSF/x8LLZi5+4G
 HBRZh2A1jIOGWxfSbpkPD64/rAp1aYZBeBVEQwAkeJdPCqlgvx8YS7vxZZT8i/1g
 vck+d4zKzUCldGADu1YAHGBhRFAbmv1sJR4fzvkYrKGyzd+5jbyFx4fdZFpj6XEO
 95P5CJgN6UIywBHrTG0CLP/828sdM7V8rmAnkvmAFXFv/MUJfPR5H81OUMWL5KAY
 3a+ZJLPcwizb/cBMl7Qqq/YIXoV+o1byd49+/1rJvcD9KLlGwLawnbE/ZZp6PlQz
 td2TNONzj3bqEXBDNx+PwpqcjSvO7KQFp+iFijZI7yRR6t+kfoqad5Vv+J0H7ATP
 MxNZ7mSIKLa/rTDWK8LV
 =YqMV
 -----END PGP SIGNATURE-----

Merge tag 'dt-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt2

update device tree for exynos4 and exynos5

* tag 'dt-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (125 commits)
  ARM: dts: add PDMA0 changes for exynos5440
  ARM: dts: Add cpufreq controller node for Exynos5440 SoC
  ARM: dts: Fix gmac clock ids due to changes in Exynos5440
  ARM: dts: add device tree file for SD5v1 board
  ARM: dts: update bootargs to boot from sda2 for exynos5440-ssdk5440
  ARM: dts: add PMU support in exynos5440
  ARM: dts: Add node for GMAC for exynos5440
  ARM: dts: list the interrupts generated by pin-controller on Exynos5440
  ARM: dts: Add FIMD DT binding Documentation
  ARM: dts: Add FIMD node and display timing node to exynos4412-origen.dts
  ARM: dts: Add FIMD node to exynos4
  ARM: dts: Add SYSREG block node for S5P/Exynos4 SoC series
  ARM: dts: Add display timing node to exynos5250-smdk5250.dts
  ARM: dts: Add FIMD node to exynos5
  ARM: dts: Add virtual GIC DT bindings for exynos5440
  ARM: dts: Document usb clocks in samsung,exynos4210-ehci/ohci bindings
  ARM: dts: add usb 2.0 clock references to exynos5250 device tree
  ARM: dts: Add architected timer nodes for exynos5250
  ARM: dts: Declare the gic as a15 compatible for exynos5250
  ARM: dts: Add HDMI HPD and regulator node for Arndale board
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-12 23:05:08 -07:00
Anatolij Gustschin
e48fc15aa2 mmc: mxcmmc: enable DMA support on mpc512x
Add SDHC DMA channel description to the mpc512x device tree to enable
slave channel requesting in the mxcmmc driver.

mpc512x DMA engine doesn't support endianness conversion when
reading/writing data from peripheral's FIFO, so we have to swap data
buffers before each DMA write and after each DMA read transfer manually.

Since chained SDHC DMA transfers are not supported on mpc512x, limit
'max_segs' tunable parameter to one and initialise it to 64 only when
running on i.MX platforms.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 15:13:41 -04:00
Anatolij Gustschin
42477053c3 mmc: mxcmmc: constify mxcmci_devtype
mxcmci_devtype struct contains constant data, so
constify this struct.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 15:13:34 -04:00
Anatolij Gustschin
bcf53524ac mmc: mxcmmc: use slot-gpio API for write-protect detection
slot-gpio API suppors read-only detection when "wp-gpios"
property is present in the device tree mmc node. Use this
API for write-protect detection.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 15:13:27 -04:00
Anatolij Gustschin
c7ceab0254 mmc: mxcmmc: add mpc512x SDHC support
The SDHC controller on mpc512x is compatible with i.MX31 SDHC,
so the mxcmmc driver can be used on mpc512x, too. Extend the
driver to support mpc512x as well.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 15:13:20 -04:00
Anatolij Gustschin
70aa610959 mmc: mxcmmc: fix race conditions for host->req and host->data access
mxcmci_dma_callback() is invoked by DMA drivers in soft-irq
context and can be interrupted by the mxcmci_irq() interrupt
which can finish the mmc request or data transfer and set
host->req or host->data pointers to NULL. Then mxcmci_data_done()
crashes with a null pointer dereferences. Protect all accesses
to host->req and host->data by spin locks.

Also check host->data pointer in mxcmci_watchdog() before
dereferencing it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 15:13:13 -04:00
Markus Pargmann
7ff747c459 mmc: mxcmmc: DT support
Adding devicetree support for imx21-mmc and imx31-mmc. Based on generic
gpio helper functions by Guennadi and generic DMA devicetree bindings.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 15:12:34 -04:00
Thomas Abraham
32d781a310 mmc: dw_mmc: let device core setup the default pin configuration
With device core now able to setup the default pin configuration,
the pin configuration code based on the deprecated Samsung specific
gpio bindings is removed.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:18:56 -04:00
Hector Palacios
1d53196a0d mmc: mxs-mmc: add broken-cd property
According to bindings documentation for mmc, the property 'broken-cd'
can be used to indicate card-detection is not available and polling
must be used instead. This patch retrieves this property
and sets a custom flag. On the get_cd() hook, it returns 1 if
the flag is set, to always assume the card is present.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:17:55 -04:00
Marc Kleine-Budde
5086e5f41f mmc: mxs-mmc: add non-removable property
Some boards have non removable cards like eMMC. Handle such case.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:17:46 -04:00
Marc Kleine-Budde
4c0c9be050 mmc: mxs-mmc: add cd-inverted property
The card-detect GPIO is inverted on some boards. Handle such case.

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:17:38 -04:00
Li Fei
3bffb800b9 mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case
Even in failed case of pm_runtime_get_sync, the usage_count
is incremented. In order to keep the usage_count with correct
value and runtime power management to behave correctly, call
pm_runtime_put_noidle in such case.

Signed-off-by: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Li Fei <fei.li@intel.com>
Acked-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:15:04 -04:00
Alexander Shiyan
abd4190f0c mmc: mxcmmc: Fix bug when card is present during boot
This patch fixes bug when card is present during boot.
Bug was introduced due commit "mmc: mxcmmc: fix bug that may block a
data transfer forever". When a card is present "mxcmci_setup_data"
function is executed, but the timer is not initialized.

...
i.MX SDHC driver
mmc0: SD Status: Invalid Allocation Unit size.
mmc0: new SD card at address b368
mmcblk0: mmc0:b368 SDC   1.91 GiB
------------[ cut here ]------------
kernel BUG at kernel/timer.c:729!
Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
CPU: 0    Not tainted  (3.9.0-rc5-next-20130404 #2)
PC is at mod_timer+0x168/0x198
LR is at mxcmci_request+0x21c/0x328
...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:12:50 -04:00
Adrian Hunter
0d3e3350d5 mmc: core: fix performance regression initializing MMC host controllers
Commit fa5501890d introduced a performance
regression by adding mmc_power_up() to mmc_start_host().  mmc_power_up()
is not necessary to host controller initialization, it is part of card
initialization and is performed anyway asynchronously.

This patch allows a driver to leave the power up in asynchronous code
(as it was before).

On my current target platform this reduces driver initialization from:

[    1.313220] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 102008 usecs

to this:

[    1.217209] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 8331 usecs

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:08:07 -04:00
Adrian Hunter
f9a94e0a3f Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully"
This reverts commit 3500ed90b2.

The reverted patch caused a significant performance regression when
booting with the root file system on eMMC.

Before the patch:

[    1.625623] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

After the patch:

[    1.935851] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.

That was an addition of 310 ms which is a 19% performance degradation.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12 14:07:50 -04:00
Terry Barnaby
bdbc5d0c60 mmc: atmel-mci: pio hang on block errors
The driver is doing, by default, multi-block reads. When a block error
occurs, card/block.c instigates a single block read: "mmcblk0: retrying
using single block read".  It leaves the sg chain intact and just changes
the length attribute for the first sg entry and the overall sg_len
parameter.  When atmci_read_data_pio is called to read the single block
of data it ignores the sg_len and expects to read more than 512 bytes as
it sees there are multiple items in the sg list. No more data comes as
the controller has only been commanded to get one block.

Signed-off-by: Terry Barnaby <terry@beam.ltd.uk>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org> # 3.2+
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-08 12:05:47 -04:00
Philip Rakity
836dc2fe89 mmc: core: Fix bit width test failing on old eMMC cards
PARTITION_SUPPORT needs to be set before doing the compare on version
number so the bit width test does not get invalid data.  Before this
patch, a Sandisk iNAND eMMC card would detect 1-bit width although
the hardware supports 4-bit.

Only affects old emmc devices - pre 4.4 devices.

Reported-by: Elad Yi <elad.yi@gmail.com>
Signed-off-by: Philip Rakity <prakity@yahoo.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 15:33:29 -04:00
Sachin Kamat
8e1c4e4d73 mmc: dw_mmc: Use pr_info instead of printk
pr_info(... is preferred to printk(KERN_INFO ...

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 10:18:27 -04:00
Sachin Kamat
f2f942ce4a mmc: dw_mmc: Check return value of regulator_enable
regulator_enable() is declared with __must_check attribute.
Hence check the return value to ensure that the regulator is enabled.

Fixes the following warning:

drivers/mmc/host/dw_mmc.c:2461:19: warning:
ignoring return value of ‘regulator_enable’, declared with attribute
warn_unused_result [-Wunused-result]
drivers/mmc/host/dw_mmc.c: In function ‘dw_mci_init_slot’:
drivers/mmc/host/dw_mmc.c:1994:19: warning:
ignoring return value of ‘regulator_enable’, declared with attribute
warn_unused_result [-Wunused-result]

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 10:18:05 -04:00
Jingoo Han
b0dd099ceb mmc: sdhci-spear: add CONFIG_PM_SLEEP to suspend/resume functions
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following
build warning when CONFIG_PM_SLEEP is not selected. This is because
sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when
the CONFIG_PM_SLEEP is enabled.

drivers/mmc/host/sdhci-spear.c:295:12: warning: 'sdhci_suspend' defined but not used [-Wunused-function]
drivers/mmc/host/sdhci-spear.c:308:12: warning: 'sdhci_resume' defined but not used [-Wunused-function]

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 10:13:58 -04:00
Jaehoon Chung
4366dcc52a mmc: dw_mmc: control the power-enable register
When card is power-on/off, need to control the power-enable register.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 10:08:37 -04:00
Kevin Liu
e065162ae4 mmc: sdhci-pxav3: controller should use SDCLK for timeout calculation
sdhci-pxav3 host controller used SDCLK for data timeout.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 09:59:42 -04:00
Kevin Liu
943647f6fe mmc: sdhci-pxav3: enhance device tree parser code
1. seperate device tree parsing from platform data handling which
   can make further work easy when platform data can be removed.

2. add calling mmc_of_parse which can parse more of property and
   pxav3_get_mmc_pdata can be shrinked a lot.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 09:59:12 -04:00
Kevin Liu
c844a46f13 mmc: sdhci-pxav3: remove cd-broken quirk for permanently present card
Flag PXA_FLAG_CARD_PERMANENT is set in sdhci_pxa_platdata flags to
indicate that the card is always wired to host, like on-chip emmc,
which is permanently present and don't need detection.

So only MMC_CAP_NONREMOVABLE should be set for this case. But current
code also sets SDHCI_QUIRK_BROKEN_CARD_DETECTION, which doesn't make
sense.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 09:58:20 -04:00
Kevin Liu
73b7afb976 mmc: sdhci-pxav3: transfer sdhci_pltfm_data as args to sdhci_pltfm_init
sdhci_pltfm_init can set host->ops and host->quirks if sdhci_pltfm_data
is transfered as arguments. Then no need to set them manually in
sdhci_pxav3_probe.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 09:58:11 -04:00
Seungwon Jeon
c09fbd7451 mmc: dw_mmc: fix fifo access for 64-bit
mci_writew causes a failure of fifo access for 64-bit.
mci_writeq is correct.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-04 09:55:53 -04:00
Shawn Guo
0e91e434c8 mmc: mxs-mmc: move to use generic DMA helper
With the generic DMA device tree helper supported by mxs-dma driver,
client devices only need to call dma_request_slave_channel() for
requesting a DMA channel from dmaengine.

Since mxs is a DT only platform now, along with the changes, the non-DT
case checking in probe function also gets cleaned up.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2013-04-04 21:22:44 +08:00
Manjunathappa, Prakash
7b43da4cfd mmc: davinci_mmc: add DT support
Adds device tree support for davinci_mmc. Also add binding documentation.
As of now tested for non-dma PIO mode and without GPIO card_detect/
write_protect option because of dependencies on EDMA and GPIO module DT
support.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Cc: linux-mmc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: devicetree-discuss@lists.ozlabs.org
Cc: cjb@laptop.org
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: mporter@ti.com
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-04 16:55:05 +05:30
Manjunathappa, Prakash
d7ca4c755a ARM: davinci: mmc: derive version information from device name
Remove specifying mmc controller IP version information via platform
data, instead specify device name so that driver derives it from
platform_device_id table. Also change the clock node name to match
the changed dev_id.
Tested on da850-evm to make sure driver loads without clk_get failures.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03 09:42:16 +05:30
Thomas Petazzoni
e573d6985e mmc: mvsdio: use dev_*() API instead of pr_*() API
The mvsdio driver was already using some dev_*() functions to print
some messages, but still using pr_*() functions for some others. This
patch converts all messages to use dev_*() functions.

Many of the pr_*() function calls were printing the output of
mmc_hostname() to preprend the message with an identifier for the
device. Since the dev_*() functions do that automatically, this patch
also gets rid of those string prefixes.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:29:47 -04:00
Thomas Petazzoni
5e81441e24 mmc: mvsdio: fix non-DT probing of GPIOs
Ralph Droms <rdroms@gmail.com> reported that 3.9-rc was breaking the
SDIO interface on his Sheevaplug platform, and that the recent changes
to the mvsdio driver are responsible for this breakage. Precisely, the
regression has been introduced by 07728b77c0 (mmc: mvsdio: use
slot-gpio for card detect gpio).

After investigation, is turns out that the Sheevaplug does not have
any "card detect" GPIO, and the Sheevaplug has not been converted to
the Device Tree. Therefore, the Sheevaplug board code does not define
a value for the .gpio_card_detect field of the mvsdio_platform_data
structure, which means that its value is 0. Unfortunately,
gpio_is_valid() considers 0 as a valid GPIO, and therefore calls
mmc_gpio_request_cd(), which fails and makes the entire probing of the
driver fail.

In fact, in the previous mvsdio code, before the Device Tree binding
was introduced, 0 was not considered as a valid GPIO. Therefore, this
fix revert back to this behavior in the non-DT case, by setting the
gpio_card_detect and gpio_write_protect local variables to -EINVAL
when the corresponding fields of the mvsdio_platform_data structure
are set to zero (i.e, left undefined). Of course, it prevents to use
GPIO 0 as a card detect or write protect GPIO, but it was a defiency
of the previous non-DT code, and the fix moving forward is to convert
platforms to the Device Tree.

The problem has been reproduced successfully on the Kirkwood-based
Marvell DB-88F6281-BP Development Board (that doesn't use the Device
Tree) and the fix has proven to work properly, after of course
removing the gpio_card_detect field of the mvsdio_platform_data
instance for this board.

Reported-by: Ralph Droms <rdroms@gmail.com>
Tested-by: Ralph Droms <rdroms@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:29:46 -04:00
Barry Song
b3b665b0a9 mmc: sdhci-sirf: add mmc host sdhci-pltfm based driver for SiRF SoCs
This patch adds the new driver for CSR SiRF SoCs:

SiRFprimaII: unicore ARM Cortex-A9
SiRFatlas6: unicore ARM Cortex-A9
SiRFmarco: dual core ARM Cortex-A9 SMP

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Bin Shi <Bin.Shi@csr.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:29:46 -04:00
Seungwon Jeon
ef3a69c7a4 mmc: block: fix the host's claim-release in special request
For normal request mmc_blk_issue_rq is called twice with asynchronous
transfer(cur and prev). Host's claim and release can be done in each
mmc_blk_issue_rq. However, Special request is currently excluded in
asynchronous transfer. After special request is finished, if there is
no new request, mmc_release_host won't be called in mmc_blk_issue_rq.
The problem is founded during mmc_suspend.

[<c0541124>] (__schedule+0x0/0x78c) from [<c05419e8>] (schedule+0x38/0x78)
[<c05419b0>] (schedule+0x0/0x78) from [<c03a843c>] (__mmc_claim_host+0xac/0x1b4)
[<c03a8390>] (__mmc_claim_host+0x0/0x1b4) from [<c03ac98c>] (mmc_suspend+0x28/0x9c)
[<c03ac964>] (mmc_suspend+0x0/0x9c) from [<c03aad24>] (mmc_suspend_host+0xb4/0x194)
...

Reported-by: Johan Rudholm <jrudholm@gmail.com>
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:29:36 -04:00
Sergey Yanovich
3500ed90b2 mmc: core: wait while adding MMC host to ensure root mounts successfully
MMC hosts are added asynchronously. We need to wait until detect returns to
avoid failed root filesystem mounts.

VFS: Cannot open root device "mmcblk0p1" or unknown-block(0,0): error -6
Please append a correct "root=" boot option; here are the available partitions:
mmc0: host does not support reading read-only switch. assuming write-enable.
1f00             256 mtdblock0  (driver?)
1f01             256 mtdblock1  (driver?)
1f02            2560 mtdblock2 mmc0: new SDHC card at address b368
 (driver?)
1f03           29696 mtdblock3  (driver?)
1f04           16384 mtdblock4 mmcblk0: mmc0:b368 USD   3.72 GiB
 (driver?)
 mmcblk0: p1
b300         3910656 mmcblk0  driver: mmcblk
  b301         3906560 mmcblk0p1 00000000-01
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

Signed-off-by: Sergey Yanovich <ynvich@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:03:29 -04:00
Lars-Peter Clausen
c915568d99 mmc: sdhci: Constify sdhci_ops structs where possible
Basically all drivers can have sdhci_ops struct const, but almost none do.
This patch constifies all sdhci_ops struct declarations where possible.

The patch was auto-generated with the following coccinelle semantic patch:

// <smpl>
@r1@
identifier ops;
identifier fld;
@@
ops.fld = ...;

@disable optional_qualifier@
identifier ops != r1.ops;
@@
static
+const
struct sdhci_ops ops = { ... };
// </smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:00:51 -04:00
Lars-Peter Clausen
ad1df8c25e mmc: sdhci-pltfm: Constify the ops field of sdhci_pltfm_data struct
All users of the sdhci_ops struct in the sdhci core already treat it as
const.  The sdhci-pltfm code itself never actually looks at the ops field
of the sdhci_pltfm_data struct and merely passes it on to the sdhci core,
so make we can make it const in the sdhci_pltfm_data struct as well.
This allows us to declare sdhci_ops structs as const in drivers using
the sdhci-pltfm helper code.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:00:29 -04:00
Lars-Peter Clausen
1db5eebf22 mmc: sdhci_pltfm: Constify sdhci_pltfm_data
The sdhci_pltfm_data struct is never modified within the sdhci_pltfm
module. So make the pdata parameter to sdhci_pltfm_init and
sdhci_pltfm_register const.  This allows drivers to declare their
sdhci_pltfm_data struct as const.

This patch also makes the sdhci_pltfm_data declarations const where
possible.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 13:00:06 -04:00
Johan Hovold
91cf54feec mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload
Fix regression introduced by commit 796211b795 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.

Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:57:22 -04:00
Dongjin Kim
0f6e73d0ab mmc: dw_mmc: Add MSHC compatible for Exynos4412
This patch adds the compatible string for MSHC controller of Exynos4412.
And exynos5250_dwmmc_caps is renamed to exynos_dwmmc_caps, since it has the
capabilities of common features supported by Exynos4 and Exynos5.

Signed-off-by: Dongjin Kim <tobetter@gmail.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:55:32 -04:00
Sachin Kamat
20183d509c mmc: dw_mmc: exynos: Remove unnecessary use of of_match_ptr()
'dw_mci_exynos_match' is always compiled in. Hence of_match_ptr
is not required.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:54:12 -04:00
Silviu-Mihai Popescu
6a966e0609 mmc: android-goldfish: use resource_size()
Use resource_size() instead of explicit calculation. This was found via
make coccicheck.

Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:53:52 -04:00
Markos Chandras
cfbeb59c7a mmc: dw_mmc: Handle unaligned data submission correctly
Commit f9c2a0dc42
"mmc: dw_mmc: Fix PIO mode with support of highmem" introduced
a regression since v3.2 making the mmc_test hang on test #13
with a "Data starvation by host timeout" interrupt.

This is because, sg_mapping_iter is used to iterate through the
data which spans on multiple pages. The problem is detected on
unaligned data submission where the code previously checked for
!(sg_next(host->sg)) which is true because we only have a single
scatter/gather list which then expands to multiple pages.
Therefore, the driver incorrectly assumed that this was the last
list item and submitted unaligned data to the mmc device. This
overflowed the FIFO on the device before all the data were written
to it. The code was fixed to only submit unaligned data when we are
handling the last sg_miter item by checking whether we reached
the desired data length or not.

The patch was tested against mmc_test and all the tests passed.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:53:49 -04:00
Markos Chandras
3e4b0d8bdc mmc: dw_mmc: Avoid adding the number of transmitted bytes twice
Previously, it was possible to add either 0 bytes or add nbytes
twice if we broke out of the outer loop and then carry on to the
"done" label. This is now fixed by adding the transferred bytes
right after the pull/pop operation

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:50:05 -04:00
Markos Chandras
1fb5f68add mmc: dw_mmc: Don't loop when handling an interrupt
There is no reason to loop when handling an interrupt. The "if" clauses
will handle all of them sequentially. This also eliminates the extra loop
we used to take with no pending interrupts and we ended up breaking out
of the while loop.

Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:45:32 -04:00
James Hogan
63008768d2 mmc: dw_mmc: move host->data_offset init earlier
host->data_offset is initialised at the end of the probe function
depending on the VERID register, and is used for PIO operations. Move
this initialisation earlier, before IRQs or slots are initialised, to be
sure that PIO won't occur prior to host->data_offset being initialised.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:42:53 -04:00
James Hogan
e6f34e2fd3 mmc: dw_mmc: setpower on MMC_POWER_{UP,OFF}
Call the setpower platform callback in response to set_ios with
ios->power_mode == MMC_POWER_UP or MMC_POWER_OFF, instead of from the
card detect work function.

This appears to fix a problem I have where a card stuck in a funny state
doesn't get properly cleared by the power being turned off, presumably
due to lack of power sequencing. This resulted in the following log
messages after boot:

mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 300000Hz, actual 298922HZ div = 167)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 200000Hz, actual 199680HZ div = 250)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 195765Hz, actual 195764HZ div = 255)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 400000Hz, actual 399360HZ div = 125)
mmc0: error -110 whilst initialising SD card
mmc_host mmc0: Bus speed (slot 0) = 99840000Hz (slot req 300000Hz, actual 298922HZ div = 167)

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:41:54 -04:00
Chris Ball
a3361abaae mmc: sdhci: Don't ignore regulator_enable() return value
Fixes:
/git/arm-soc/drivers/mmc/host/sdhci.c: In function 'sdhci_add_host':
/git/arm-soc/drivers/mmc/host/sdhci.c:2910:19: warning: ignoring
return value of 'regulator_enable', declared with attribute
warn_unused_result [-Wunused-result]

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:40:05 -04:00
Alexandru Gheorghiu
2211990162 mmc: wmt-sdmmc: Use resource_size()
Used resource_size function instead of explicit computation.
Patch found using coccinelle.

Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:38:46 -04:00
Wei Yongjun
8a8396ae21 mmc: wmt-sdmmc: remove unused variable in wmt_complete_data_request()
The variable 'mmc' is initialized but never used, so remove it.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:37:50 -04:00
Chunhe Lan
4590205b9f mmc: sdhci-pltfm: Fix timeout on t4240's sdhci controller
This patch fixes timeout problems on t4240's sdhci controller:

	mmc0: Too large timeout requested for CMD25!
	mmc0: Too large timeout requested for CMD25!
	mmc0: Too large timeout requested for CMD25!

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:36:52 -04:00
Wei WANG
d88691be7b mmc: rtsx_pci_sdmmc: Don't execute power up sequence repeatedly
For some Realtek card readers, the power up sequence can only be executed
when power has been turned off fully.

So the rtsx host should not start power up sequence again when set_ios
been called if the power has been turned on.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:35:42 -04:00
Thomas Abraham
e19499ae10 mmc: sdhci-s3c: let device core setup the default pin configuration
With device core now able to setup the default pin configuration,
the call to devm_pinctrl_get_select_default can be removed. And
the pin configuration code based on the deprecated Samsung specific
gpio bindings is also removed.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:33:21 -04:00
Jingoo Han
4a2d8ecce0 mmc: mvsdio: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:29:12 -04:00
Jingoo Han
d4bf63251c mmc: davinci_mmc: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:29:01 -04:00
Aaron Lu
eed222aca8 mmc: sdio: bind acpi with sdio function device
ACPI spec 5 defined the _ADR encoding for sdio bus as:
High word - slot number (0 based)
Low word  - function number

This patch adds support for binding sdio function device with acpi node,
and if successful, involve acpi into its power management.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:26:54 -04:00
Kevin Liu
94144a465d mmc: sdhci: add get_cd() implementation
1. mmc_rescan will call get_cd to know whether the card is present
before mmc_rescan_try_freq to avoid useless trials during
card removal or start host is called when card is not present.

2. get_cd needs to be checked to resolve slow card removal issue.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:24:50 -04:00
Kevin Liu
1450734ec6 mmc: core: enhance card removal judgement for slow removal
Function _mmc_detect_card_removed will be called to know whether
the card is still present when host->bus_ops->detect is called.
In current code, the return value of this function generally only
depend on the result of sending cmd13 to card, which may not safe
for card with detection support like slot gpio detection.
Because the communication status between host and card may out of
sync with the detect status if remove the card slowly or hands shake
during the process. The direct reason is the async between card
detect switch and card/slot pad contaction in hardware, which is
defined by spec.

The spec define card insert/remove sequence as below (both standard size
SD card and MicroSD card have the same sequence):
"Part 1 Standard Size SD Card Mechanical Addendum Ver4.00 Final,
Appendix C: Card Detection Switch" (Take normally open type as example)
a)SD card insertion sequence:
  The card detection switch should be turned on after all SD card
  contact pads are connected to the host connector contact pads.
b)SD removal sequence:
  The card detection switch should be turned off when the SD card
  is just going to be removed and before any SD card contact pad is
  disconnected from the host connector contact pad.

Below is the sequence when this issue occur (Take slot gpio detection
as example and remove the card slowly during the process):
1. gpio level changed and card detect interrupt triggered.
2. mmc_rescan was launched.
3. the card pads were still contacted with the slot pads because of slow
   removal. So _mmc_detect_card_removed and mmc_rescan think card was
   still present (cmd13 succeed).
4. card pads were discontacted from the card slot pads.
So the card was actually removed finally but the card removal event
has been missed by system.
The interval length between step 1 and step 4 depends on the
card removal speed. If it's longer than the detect work schedule
delay which is 200ms, this issue will likely happen.

This patch add the card detect status check in function
_mmc_detect_card_removed if cmd13 check succeed and host->ops->get_cd
provided. If get_cd detect no card present then schedule another detect
work 200ms later.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Tested-by: Johan Rudholm <johan.rudholm@stericsson.com>
Reviewed-by: Philip Rakity <prakity@nvidia.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:23:34 -04:00
Bernie Thompson
51e7e8b632 mmc: core: Add in support to expose PRV for v4 MMCs
The JEDEC MMC v4 spec defines a new PRV value in place of the original
fwrev and hwrev specified in v1. We can expose this in the kernel to enable
user space to more easily determine the product revision of a given MMC.

Signed-off-by: Bernie Thompson <bhthompson@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:10:42 -04:00
Manjunathappa, Prakash
e3e020f8ac mmc: davinci_mmc: allow driver to work without DMA resource
Do not return probe failure with missing DMA resources, allow driver
to work in PIO mode.  Tested on da850-evm by mounting partition
followed by file creation and deletion.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:05:16 -04:00
Hyeonsu Kim
c69042a51e mmc: dw_mmc: fixed a wrong UHS_REG 16 bit clear
In the legacy code, driver clear not only UHS_REG 16 bit also 0-15bit.
If we use UHS-1 mode spec card like SDR50, SDR104. UHS_REG 0-15 should
be set by 1 according to slot id. In this case, legacy code can cause
problems.

In particular, UHS_REG consists of DDR_REG[31:16] and VOLT_REG[15:0].
Before adjusting this patch, bit[15:0] is always cleared.

Signed-off-by: Hyeonsu Kim <hyeonsu.kim@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:03:22 -04:00
Kyoungil Kim
87a74d399a mmc: dw_mmc: empty FIFO after data transfer over interrupt in pio mode
In dwc manual, the below contents are described:

"During end of packet, interrupt is not generated if threshold
programming is larger than any remaining data. It is responsibility
of host to read remaining bytes on seeing Data Transfer Done
interrupt"

We also have seen the data cannot be read fully when
"sg_miter->length" is less than FIFO size.

Signed-off-by: Kyoungil Kim <ki0351.kim@samsung.com>
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 12:00:59 -04:00
Jaehoon Chung
0cea529d1a mmc: dw_mmc: return the result of mmc_add_host()
Check the result of mmc_add_host() and return the value.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 11:55:57 -04:00
Jingoo Han
3aaf7ba7fd mmc: sdhci-s3c: Use devm_clk_get()
Use devm_clk_get() rather than clk_get() to make cleanup paths
more simple.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 11:52:50 -04:00
Jan Luebbe
dc642c28d4 mmc: omap_hsmmc: support deferred probing for GPIOs
If the CD/WP-GPIOs are not provided by the SoC's GPIO controller,
we need to handle the case where omap_hsmmc is probed earlier than
the GPIO controller chosen in the device tree.

Fix this by checking the return value of of_get_named_gpio against
-EPROBE_DEFER and passing it through to the probe function.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22 11:51:49 -04:00
Joseph Lo
0aacd23ff2 mmc: tegra: use mmc_of_parse to get the support of standard MMC DT bindings
Updating the sdhci-tegra driver to use mmc_of_parse to support standard
MMC DT bindings. Then we can remove the redundant code that already support
in generic MMC core.

Signed-off-by: Joseph Lo <josephl@nvidia.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-19 13:10:09 -04:00
Chris Ball
2c06aeb25c ARM: tegra: DT-related fixes needed by the MMC tree
In order to convert the Tegra MMC driver to using mmc_of_parse(), some
 bugs in the Tegra device-tree content need to be fixed first; it's
 currently wrong but unused, and mmc_of_parse() causes that data to be
 used for the first time.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRPkD/AAoJEMzrak5tbycxoFAQAJMd6F58+cCTt7V6d57sfaiT
 E4kun2nLI5qpFErLb2ehhoWkFJJ/6WQ3ytoqFBQY4UKVwp0gFhuC5od9gKgTcVuu
 8OeH0nPr0RDasHZ4yYm8eFM1GwrMYRda5Xfs9OuLBSi/twNcHNplhjptCJgZ6iGD
 i2MBheIY9K3sYsRCxcOF8doUFrjHhxUS9fyfipHZ+zfoWeqcQ2LTy1j1ATjT+C5u
 QhpBptOqRvYHTWfTY8wLZ49h+OHHMMU1NDlEPVXfg83CyhfU+A1qqfqbvArltVag
 svnq9xIlzjzQB+HGYQSWROhmOWpFeV+jzm0cUXJ/E81IilVXVcE3++aVuH4x4AbL
 vqFMjs7Ht14BD6bXVbrLFUcVGE5R5iucgkzkLfcKSOfMUlGD0pavRWV5vqhXG/rw
 4QPjJx04C5jEWJm8ymwQusWeNhOnkYlBxs/muFeyN/mYYeQHTDKRgqFkArL8fmFp
 dSGkuumo6/GqI1AM5KHGcFfO3Os/CDc0g5KQYqUmYtkNsYJq9BJ5mABWiNuU7wBi
 pA2znJG4HbWWAS0/qgrcr6rQFMraRXbmZtiHFukCAUsuCtsCJ/DVKyfMLiadlqCg
 KUtNchgcFmCBYugnVzQJDdYqOZc20t9X8lNWtvftnmBFbTDjGGQnCkKneY4xiooQ
 sELgRCyRmL/udJgYMlht
 =G8rC
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.10-fixes-for-mmc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into mmc-next

ARM: tegra: DT-related fixes needed by the MMC tree

In order to convert the Tegra MMC driver to using mmc_of_parse(), some
bugs in the Tegra device-tree content need to be fixed first; it's
currently wrong but unused, and mmc_of_parse() causes that data to be
used for the first time.
2013-03-19 13:07:13 -04:00
Jiri Slaby
aa27a094e2 TTY: add tty_port_tty_hangup helper
It allows for cleaning up on a considerable amount of places. They did
port_get, hangup, kref_put. Now the only thing needed is to call
tty_port_tty_hangup which does exactly that. And they can also decide
whether to consider CLOCAL or completely ignore that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-18 16:24:29 -07:00
H Hartley Sweeten
fe141149bf drivers/mmc: use module_pcmcia_driver() in pcmcia drivers
Use the new module_pcmcia_driver() macro to remove the boilerplate
module init/exit code in the pcmcia drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 12:26:04 -07:00
Arnd Bergmann
3f9fb2a08f ARM: cns3xxx: make mach header files local
The mach/cns3xxx.h and mach/pm.h header files are used only
in the platform code itself, so there is no need to make
them globally visible. This gets us closer to multiplatform
configuration for cns3xxx.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 17:34:55 +01:00
Sachin Kamat
9665f7f234 mmc: dw_mmc: Make dw_mci_exynos_probe static
Silences the following sparse warning:
drivers/mmc/host/dw_mmc-exynos.c:218:5: warning:
symbol 'dw_mci_exynos_probe' was not declared. Should it be static?

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-12 07:48:36 -04:00
Rhyland Klein
5ebf255249 mmc: sdhci-tegra: add basic support for Tegra114
The mmc controller on Tegra114 platforms is basically compatible with
the settings used for Tegra30. However there is a difference where we
don't need the extra ENABLE_SDHCI_SPEC_300 quirk as Tegra114 hardware
advertises v3.0 support already.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-06 18:33:48 -05:00
Rhyland Klein
76f3ae125f mmc: sdhci-tegra: cleanup ifdefs
The structs wrapped with the SOC ifdefs are small enough where having
them always there shouldn't be a big overhead. Removing the ifdefs
also makes the code a little cleaner.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-06 18:33:44 -05:00
Stephen Boyd
805b3e4235 mmc: msm_sdcc: Remove unnecessary include
This driver has no reason to include msm_iomap.h. Remove it so
that we can remove msm_iomap.h from include/mach in the near future.

Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
2013-03-05 12:05:43 -08:00
Kukjin Kim
24fae0fe2c mmc: s3cmci: moved mach/regs-sdi.h into s3cmci device driver
Since mach/regs-sdi.h is used only for s3cmci.c, so this moves the
header file into the driver file, drivers/mmc/host/s3cmci.c file.

Cc: Chris Ball <cjb@laptop.org>
Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-05 10:42:47 +09:00
Lee Jones
237fb5e675 mmc: mmci: Move ios_handler functionality into the driver
There are currently two instances of the ios_handler being used.
Both of which mearly toy with some regulator settings. Now there
is a GPIO regulator API, we can use that instead, and lessen the
per platform burden. By doing this, we also become more Device
Tree compatible.

Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-01 23:25:25 +01:00
Tejun Heo
803d9e043d mmc: convert to idr_alloc()
Convert to the much saner new idr interface.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Ball <cjb@laptop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:17 -08:00
Imre Deak
4225fc8555 lib/scatterlist: use page iterator in the mapping iterator
For better code reuse use the newly added page iterator to iterate
through the pages.  The offset, length within the page is still
calculated by the mapping iterator as well as the actual mapping.  Idea
from Tejun Heo.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27 19:10:10 -08:00
Linus Torvalds
ed5dc2372d MMC highlights for 3.9:
Core:
  - Support for packed commands in eMMC 4.5.  (This requires a host
    capability to be turned on.  It increases write throughput by 20%+,
    but may also increase average write latency; more testing needed.)
  - Add DT bindings for capability flags.
  - Add mmc_of_parse() for shared DT parsing between drivers.
 
 Drivers:
  - android-goldfish: New MMC driver for the Android Goldfish emulator.
  - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
  - omap_hsmmc: Fix boot hangs with RPMB partitions.
  - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
  - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
  - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
  - tmio_mmc: Add DT bindings, support for vccq regulator.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.13 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKmwHAAoJEHNBYZ7TNxYMNBYP/2FZRY33nrnJ0yKeMpyfdH+C
 LN+33imQudA2t86FlbAOocvcpM12oTPy+DkIbFchWhN1O4lzrqMos8/527QUm9qL
 cyCnZXrbst/Ttrs3UIbfkKNhA1m4Wau/taNPJ0fWqdmZU4424O774xSOyyB8m9x/
 DKuPIs6B9AfVAlS+OM8ZtviIvsJRgC6amZ0mNQZIKGHPm7vCTg6n35tP1ux7ZvJQ
 4dMlgqRalV+xN9gNBnCVLOc2eSwEyxIJA2m13LTHGf72pkNvSdYrID87qTJbvXOl
 Ed7PHuU3+M5bHw7ErCkbi8rmwuSuc8omNt9WK+syGLx4g7v7GceIYHNQudatdN7O
 gYUWnufT6Om6y+6h9QJ5td4ZZ7i6MhfC1Ps8hJCUjiVn+cLKlEPj0KmLAhZm+6cu
 wuBdCujeAFu7Z5VcaO2TBLHXXsgggnWbpoq7v6fucCNIleBe598Nu2YJAdbMc+W4
 8mONN4ANslTw7CAMrL3C99Ab1WVLZenX38schgDisTkGnI8dr/JCD4OpqAnPSKql
 qD5KCKRb8O4BMZpQxiFwyTzqYpmNM9RkaIykLxY5y26lgwFI+At9wh1HnhFC4Hl/
 ReJ5Cnm8sH19Vgz+5zpZzzS5/aCssObdfFImIfw1wWzwk9A8EHSjAZsVUkzXiVd4
 yRwz6eeO3gBMZ+v2humV
 =dYdW
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC update from Chris Ball:
 "MMC highlights for 3.9:

  Core:
   - Support for packed commands in eMMC 4.5.  (This requires a host
     capability to be turned on.  It increases write throughput by 20%+,
     but may also increase average write latency; more testing needed.)
   - Add DT bindings for capability flags.
   - Add mmc_of_parse() for shared DT parsing between drivers.

  Drivers:
   - android-goldfish: New MMC driver for the Android Goldfish emulator.
   - mvsdio: Add DT bindings, pinctrl, use slot-gpio for card detection.
   - omap_hsmmc: Fix boot hangs with RPMB partitions.
   - sdhci-bcm2835: New driver for controller used by Raspberry Pi.
   - sdhci-esdhc-imx: Add 8-bit data, auto CMD23 support, use slot-gpio.
   - sh_mmcif: Add support for eMMC DDR, bundled MMCIF IRQs.
   - tmio_mmc: Add DT bindings, support for vccq regulator"

* tag 'mmc-updates-for-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (92 commits)
  mmc: tegra: assume CONFIG_OF, remove platform data
  mmc: add DT bindings for more MMC capability flags
  mmc: tmio: add support for the VccQ regulator
  mmc: tmio: remove unused and deprecated symbols
  mmc: sh_mobile_sdhi: use managed resource allocations
  mmc: sh_mobile_sdhi: remove unused .pdata field
  mmc: tmio-mmc: parse device-tree bindings
  mmc: tmio-mmc: define device-tree bindings
  mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
  mmc: (cosmetic) remove "extern" from function declarations
  mmc: provide a standard MMC device-tree binding parser centrally
  mmc: detailed definition of CD and WP MMC line polarities in DT
  mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
  mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
  mmc: sdhci: check voltage range only on regulators aware of voltage value
  mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
  mmc: support packed write command for eMMC4.5 devices
  mmc: add packed command feature of eMMC4.5
  mmc: rtsx: remove driving adjustment
  mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
  ...
2013-02-26 09:31:09 -08:00
Linus Torvalds
ab7826595e This is the MFD pull request for the 3.9 merge window.
No new drivers this time, but a bunch of fairly big cleanups:
 
 - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation,
   OMAP5 support and clock management code cleanup.
 
 - The first step of a major sync for the ab8500 driver from Lee Jones. In
   particular, the debugfs and the sysct interfaces got extended and improved.
 
 - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core
   driver, with a much needed module id lookup code improvement.
 
 - The regular wm5102 and arizona cleanups and fixes from Mark Brown.
 
 - Laxman Dewangan extended the palmas APIs in order to implement the palmas
   GPIO and rt drivers.
 
 - Laxman also added DT support for the tps65090 driver.
 
 - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and
   Darren Hart.
 
 - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based
   devices to switch to the new abx500 pin-ctrl driver.
 
 - The max8925 now has device tree and irqdomain support thanks to Qing Xu.
 
 - The recently added rtsx driver got a few cleanups and fixes for a better
   card detection code path and now also supports the RTS5227 chipset, thanks
   to Wei Wang and Roger Tseng.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRJWtoAAoJEIqAPN1PVmxKHvEP/2B0uUJQpRjTjc9lgrzaUdFO
 QdSyj8Vpz1fZPF3cDuik/Be91U1nICyJWZZ7Yvngih3kbqiGw8nbp9AATwdF4Anl
 +QEtPS9YIpu1w5NS4r01q+cx3NxFsaR5yfNPKLWWnLtN8zHq4qQS8SF8jjdrsgkz
 zUJrjn1GfPPeuyR6Fuko9Mxk6oQ6TUazWJwmxzSCcrKKQ7GlAnbRWcwv2Qnv3GTg
 xi9S85xmLtVhLmMIQ2OR4JP56Vc49OL2/+hv1uShtFVDR4JLeZ5l8j0IPjgXJTrv
 ZbcrzEfJkV+zkY5RmDQrZzNLIWQmH9lj0bzitrS8Ii622J/mfnvQEgnC5fObphjg
 sYKJuBtO9o7XtFJxH7/oXdwM2gC5jDy43FmRv9J2mIDVoX8kNZMzY/sqmL8jm7KD
 MZU0D7liOyF3/1VbZHGSplKp+HKd5XYXCDQEesG/urkDr2edYHdb52iUVYGC32yV
 MaTqXnRMGURdjhCorAZPV8hoQOSWV8pj6oskk+E3upCmWjQWdhKMw3/HzasDLO9B
 eoQSgwZXJLTV8hJjAdgPUjZbxyOyW+9jKA12nyqwX3noq0NseSSJaeZUWmLecmbF
 vXcg4LAwSUycNJ0DxtWC2oEUV9jv4B+dOE7avVT6BDSvth4nzDlO9gOTtxBLcgTz
 JKrAPxY1nS4AUXJbsYTq
 =BhC1
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFS updates from Samuel Ortiz:
 "This is the MFD pull request for the 3.9 merge window.

  No new drivers this time, but a bunch of fairly big cleanups:

   - Roger Quadros worked on a OMAP USBHS and TLL platform data
     consolidation, OMAP5 support and clock management code cleanup.

   - The first step of a major sync for the ab8500 driver from Lee
     Jones.  In particular, the debugfs and the sysct interfaces got
     extended and improved.

   - Peter Ujfalusi sent a nice patchset for cleaning and fixing the
     twl-core driver, with a much needed module id lookup code
     improvement.

   - The regular wm5102 and arizona cleanups and fixes from Mark Brown.

   - Laxman Dewangan extended the palmas APIs in order to implement the
     palmas GPIO and rt drivers.

   - Laxman also added DT support for the tps65090 driver.

   - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra
     and Darren Hart.

   - Linus Walleij patchset for the ab8500 driver allowed ab8500 and
     ab9540 based devices to switch to the new abx500 pin-ctrl driver.

   - The max8925 now has device tree and irqdomain support thanks to
     Qing Xu.

   - The recently added rtsx driver got a few cleanups and fixes for a
     better card detection code path and now also supports the RTS5227
     chipset, thanks to Wei Wang and Roger Tseng."

* tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits)
  mfd: lpc_ich: Use devres API to allocate private data
  mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH
  mfd: lpc_sch: Accomodate partial population of the MFD devices
  mfd: da9052-i2c: Staticize da9052_i2c_fix()
  mfd: syscon: Fix sparse warning
  mfd: twl-core: Fix kernel panic on boot
  mfd: rtsx: Fix issue that booting OS with SD card inserted
  mfd: ab8500: Fix compile error
  mfd: Add missing GENERIC_HARDIRQS dependecies
  Documentation: Add docs for max8925 dt
  mfd: max8925: Add dts
  mfd: max8925: Support dt for backlight
  mfd: max8925: Fix onkey driver irq base
  mfd: max8925: Fix mfd device register failure
  mfd: max8925: Add irqdomain for dt
  mfd: vexpress: Allow vexpress-sysreg to self-initialise
  mfd: rtsx: Support RTS5227
  mfd: rtsx: Implement driving adjustment to device-dependent callbacks
  mfd: vexpress: Add pseudo-GPIO based LEDs
  mfd: ab8500: Rename ab8500 to abx500 for hwmon driver
  ...
2013-02-24 20:00:58 -08:00
Stephen Warren
0e78610294 mmc: tegra: assume CONFIG_OF, remove platform data
Tegra only supports, and always enables, device tree. Remove all ifdefs
and runtime checks for DT support from the driver. Platform data is
therefore no longer required. Rework the driver to parse the device tree
directly into struct sdhci_tegra.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:26 -05:00
Guennadi Liakhovetski
2fdb6e2d9b mmc: add DT bindings for more MMC capability flags
Many MMC capability flags are platform-dependent and are traditionally set
in platform data. With DT often each such capability requires a special
binding. Add bindings for MMC_CAP_SD_HIGHSPEED, MMC_CAP_MMC_HIGHSPEED,
MMC_CAP_POWER_OFF_CARD and MMC_CAP_SDIO_IRQ capabilities. Also add code to
DT parser to look up "keep-power-in-suspend" and "enable-sdio-wakeup"
bindings and set MMC_PM_KEEP_POWER and MMC_PM_WAKE_SDIO_IRQ respectively,
if found.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:25 -05:00
Guennadi Liakhovetski
619b08d45a mmc: tmio: add support for the VccQ regulator
Some SD/MMC interfaces use 2 power regulators: one to power the card itself
(Vcc) and another one to pull signal lines up (VccQ). In case of eMMC and
UHS SD cards the regulators also have to be configured to supply different
voltages. The preferred order of turning supply power on and off is to
turn Vcc first on and last off.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:24 -05:00
Guennadi Liakhovetski
ac51b9611d mmc: sh_mobile_sdhi: use managed resource allocations
Use managed allocations to get memory, clock and interrupts . This
significantly simplifies clean up paths.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:23 -05:00
Guennadi Liakhovetski
76a411f9f9 mmc: sh_mobile_sdhi: remove unused .pdata field
The struct sh_mobile_sdhi_info::pdata field was only used for platform-
based card detection and isn't used anymore since the migration to GPIO-
based MMC slot functions. Remove it.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:22 -05:00
Guennadi Liakhovetski
5a00a971a2 mmc: tmio-mmc: parse device-tree bindings
Add parsing of common and driver-specific DT bindings to the tmio-mmc
MMC host driver and the sh_mobile_sdhi interface layer.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:22 -05:00
Guennadi Liakhovetski
eca889f60c mmc: sh_mmcif: use mmc_of_parse() to parse standard MMC DT bindings
Use mmc_of_parse() to get interface capability flags and used GPIOs from
device-tree bindings.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:21 -05:00
Guennadi Liakhovetski
6c56e7a0ff mmc: provide a standard MMC device-tree binding parser centrally
MMC defines a number of standard DT bindings. Having each driver parse
them individually adds code redundancy and is error prone. Provide a
standard function to unify the parsing. After all drivers are converted
to using it instead of their own parsers, this function can be integrated
into mmc_alloc_host().

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:19 -05:00
Guennadi Liakhovetski
7b952137fd mmc: sdhi, tmio: only check flags in tmio-mmc driver proper
tmio-mmc platform flags can be set by various means, including caller
drivers and device-tree bindings, therefore it is better to only check
them in the tmio-mmc driver proper, not in caller drivers themselves.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:18 -05:00
Fabio Estevam
21f5998f10 mmc: sdhci: Fix parameter of sdhci_do_start_signal_voltage_switch()
3714f4315354 ("mmc: sdhci: update signal voltage switch code") changed the
type of the second parameter of sdhci_do_start_signal_voltage_switch(),
from "struct mmc_ios *ios" to "int signal_voltage" which causes the
following build warning:

drivers/mmc/host/sdhci.c:2044:2: warning: initialization from incompatible pointer type [enabled by default]
drivers/mmc/host/sdhci.c:2044:2: warning: (near initialization for 'sdhci_ops.start_signal_voltage_switch') [enabled by default]

Use the previous type so that it matches the start_signal_voltage_switch()
definition from host.h.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:18 -05:00
Marek Szyprowski
a4f8f257ed mmc: sdhci: check voltage range only on regulators aware of voltage value
Some regulators don't report any voltage values, so checking supported
voltage range results in disabling all SDHCI_CAN_VDD_* flags and
registration failure. This patch finally provides a correct fix for the
registration of SDHCI driver with all possible voltage regulators:
dummy, fixed and regulated without using regulator_count_voltages()
hacks.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:17 -05:00
Stephen Warren
29866a98be mmc: bcm2835: set SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK does basically the same as
implementing struct sdhci_ops .get_timeout_clock, so simply set that
quirk and remove the custom code to simplify the driver.

Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:16 -05:00
Seungwon Jeon
ce39f9d17c mmc: support packed write command for eMMC4.5 devices
This patch supports packed write command of eMMC4.5 devices.  Several
writes can be grouped in packed command and all data of the individual
commands can be sent in a single transfer on the bus. Large amounts of
data in one transfer rather than several data of small size are
effective for eMMC write internally.  As a result, packed command help
write throughput be improved.  The following tables show the results
of packed write.

Type A:
test     none |  packed
iozone   25.8 |  31
tiotest  27.6 |  31.2
lmdd     31.2 |  35.4

Type B:
test     none |  packed
iozone   44.1 |  51.1
tiotest  47.9 |  52.5
lmdd     51.6 |  59.2

Type C:
test     none |  packed
iozone   19.5 |  32
tiotest  19.9 |  34.5
lmdd     22.8 |  40.7

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:16 -05:00
Seungwon Jeon
abd9ac1449 mmc: add packed command feature of eMMC4.5
This patch adds packed command feature of eMMC4.5.  The maximum number
for packing read (or write) is offered and exception event relevant to
packed command which is used for error handling is enabled. If host
wants to use this feature, MMC_CAP2_PACKED_CMD should be set.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:15 -05:00
Roger Tseng
ac48653cec mmc: rtsx: remove driving adjustment
Several new models of readers use different way to select driving
capability (a necessary adjustment along with voltage change). Removing
this from device-independent rtsx_pci_sdmmc module. It will be implemented
in device-depend calls encapsulated by rtsx_pci_switch_output_voltage().

Signed-off-by: Roger Tseng <rogerable@realtek.com>
Reviewed-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:15 -05:00
Marek Szyprowski
5f56a8e6ef mmc: use regulator_can_change_voltage() instead of regulator_count_voltages
mmc_regulator_set_ocr() depends on the ability of regulator to change the
voltage value. When regulator cannot change its voltage output, some code
is skipped to avoid reporting false errors on some boards, which use MMC
hosts with fixed regulators (e.g. Samsung Goni and UniversalC210 boards).

This patch replaces a hacky workaround based on regulator_count_voltages()
value with the correct call to recently introduced
regulator_can_change_voltage() function in regulators core.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:14 -05:00
Kevin Liu
bb691ae464 mmc: sdhci-pxav3: add pm runtime support
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Jialing Fu <jlfu@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:13 -05:00
Jaehoon Chung
f5c2758fbb mmc: core: fix indentation
This patch fixes incorrect indentation.  (Just code cleanup)

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:13 -05:00
Seungwon Jeon
7a81902fa5 mmc: block: don't start new request when the card is removed
It's not necessary to start a new request while error handling if
the card was removed.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Konstantin Dorfman <kdorfman@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:12 -05:00
Seungwon Jeon
9b844961c2 mmc: core: fix permanent sleep of mmcqd during card removal
This patch is derived from:
"mmc: fix async request mechanism for sequential read scenarios".

According as async transfer, a request is handled with twice mmc_start_req.
When the card is removed, the request is actually not issued in the first
mmc_start_req [__mmc_start_data_req]. And then mmc_wait_for_data_req_done
will come in the next mmc_start_req. But there is no event for completions.
wake_up_interruptible is needed in __mmc_start_data_req for the case of
removed card.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Tested-by: Konstantin Dorfman <kdorfman@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:12 -05:00
Kevin Liu
52983382c7 mmc: sdhci: enhance preset value function
4d55c5a1 ("mmc: sdhci: enable preset value after uhs initialization")
added preset value support and enabled it by default during sd card init.

Below are the enhancements introduced by this patch:

1. In current code, preset value is enabled after setting clock finished,
which means the clock is manually set by driver firstly and then suddenly
switched to preset value at this point. So the first setting is useless
and unnecessary. What's more, the first clock setting may differ from the
preset one.  The better way is enable preset value just after switch to
UHS mode so the preset value can take effect immediately. So move preset
value enable from mmc_sd_init_card to sdhci_set_ios which will be called
during set timing.

2. In current code, preset value is disabled at the beginning of
mmc_attach_sd.  It's too late since low freq (400khz) should be set in
mmc_power_up.  So move preset value disable to sdhci_set_ios which will
be called during power up.

3. host->clock and ios->drv_type should also be updated according to the
preset value if it's enabled. Current code missed this.

4. This patch also introduce a quirk to disable preset value in case
preset value doesn't work.

This patch has been verified on sdhci-pxav3 platform with both preset
enabled and disabled.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:11 -05:00
Roland Stigge
073350f7b5 mmc: mmc_spi: Fix return value evaluation of irq_of_parse_and_map()
When irq_of_parse_and_map() returns an error, it does as zero. But in
mmc_spi_get_pdata(), the error return case is compared against NO_IRQ.
This might work where NO_IRQ is zero (defaults to zero when undefined,
as on MIPS) but not where NO_IRQ is different, e.g. on ARM where it's -1.

This patch changes to comparison with 0 which is the error return value
of irq_of_parse_and_map().

Tested on ARM that mmc_spi is working now.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:10 -05:00
Lars-Peter Clausen
d005d94359 mmc: sdhci-pltfm: Add a common clk API implementation of get_timeout_clock
Quite a few drivers have a implementation of the get_timeout_clock
callback which simply returns the result of clk_get_rate on the device's
clock. This patch adds a common implementation of this to the sdhci-pltfm
module and replaces all custom implementations with the common one.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:09 -05:00
Kevin Liu
20b92a30b5 mmc: sdhci: update signal voltage switch code
The protocol related code is moved to core stack. So update the host
driver accordingly.

Signed-off-by: Kevin Liu <kliu5@marvell.com>
Tested-by: Tim Wang <wangtt@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:09 -05:00
Johan Rudholm
0797e5f145 mmc: core: Fixup signal voltage switch
When switching SD and SDIO cards from 3.3V to 1.8V signal levels, the
clock should be gated for 5 ms during the step. After enabling the
clock, the host should wait for at least 1 ms before checking for
failure. Failure by the card to switch is indicated by dat[0:3] being
pulled low. The host should check for this condition and power-cycle
the card if failure is indicated.

Add a retry mechanism for the SDIO case.

If the voltage switch fails repeatedly, give up and continue the
initialization using the original voltage.

This patch places a couple of requirements on the host driver:

 1) mmc_set_ios with ios.clock = 0 must gate the clock
 2) mmc_power_off must actually cut the power to the card
 3) The card_busy host_ops member must be implemented

if these requirements are not fulfilled, the 1.8V signal voltage switch
will still be attempted but may not be successful.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:08 -05:00
Johan Rudholm
567c89032c mmc: core: Break out start_signal_voltage_switch
Allow callers to access the start_signal_voltage_switch host_ops
member without going through any cmd11 logic. This is mostly a
preparation for the following signal voltage switch patch.

Also, reset ios.signal_voltage to its original value if
start_signal_voltage_switch fails.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:07 -05:00
Johan Rudholm
276e090f92 mmc: core: Add mmc_power_cycle
Add mmc_power_cycle which can be used to power cycle for instance
SD-cards.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:06 -05:00
Johan Rudholm
3f8a7fabd6 mmc: sd: Simplify by using mmc_host_uhs
Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:05 -05:00
Balaji T K
d0123ccac5 mmc: core: expose RPMB partition only for CMD23 capable hosts
SET_BLOCK_COUNT CMD23 is needed for all access to RPMB partition.  If
block count is not set by CMD23, all subsequent read/write commands fail
as per eMMC specification. So, If the host does not support CMD23, do not
expose RPMB partition.

Accessing RPMB partition can cause hang / huge delay for hosts which do
not support CMD23.

Signed-off-by: Balaji T K <balajitk@ti.com>
Reported-and-Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:05 -05:00
Mike Lockwood
85c34d2e7b mmc: goldfish: emulated MMC device
This driver handles the virtual MMC device present in the Goldfish emulator.
The patch folds together initial work from Mike Lockwood and patches by
San Mehat, Jun Nakajima and Tom Keel <thomas.keel@intel.com> plus cleanups
by Alan Cox to get it all into 3.6 shape.

Signed-off-by: Mike A. Chan <mikechan@google.com>
[cleaned up and x86 support added]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
[Moved to 3.4]
Signed-off-by: Tom Keel <thomas.keel@intel.com>
[Moved to 3.7]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:04 -05:00
Sascha Hauer
af51079e68 mmc: sdhci-esdhc-imx: support 8bit mode
The i.MX esdhc has a nonstandard bit layout for the SDHCI_HOST_CONTROL
register. To support 8bit bus width on i.MX populate the platform_bus_width
callback. This is tested on an i.MX25, but should according to the datasheets
work on the other i.MX using this hardware aswell. The i.MX6, while having
a SDHCI_SPEC_300 controller, still uses the same nonstandard register layout.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:03 -05:00
Sascha Hauer
7bc088d38f mmc: sdhci: rename platform_8bit_width to platform_bus_width
The 8bit in the function name is misleading. When set, it will be
used to set the bus width, regardless of whether 8bit or another
bus width is requested, so change the function name to
platform_bus_width.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:02 -05:00
Shawn Guo
2a15f981ae mmc: sdhci-esdhc-imx: Auto CMD23 support for usdhc
SDHCI core will try to use Auto CMD23 for mmc card.  Currently, we will
see the following message with mmc card on usdhc due to the lacking of
Auto CMD23 support in the driver.

$ mmc0: new high speed MMC card at address 0001
mmcblk1: mmc0:0001 MMC02G 1.87 GiB
mmcblk1: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00
mmcblk1: retrying using single block read
 mmcblk1:

Enable Auto CMD23 support for usdhc so that mmc card can work in
multiple block mode.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:02 -05:00
Shawn Guo
58c8c4fbdb mmc: sdhci-esdhc-imx: manually reset MIX_CTRL for usdhc
It's another violation to SDHC spec that software reset on usdhc
does not reset MIX_CTRL register.  Have to do it manually, otherwise
the preserving of the register bits (e.g. AC23EN) may cause mmc card
fail to be initialized.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:01 -05:00
Shawn Guo
69f5469822 mmc: sdhci-esdhc-imx: separate transfer mode from command write for usdhc
The combining of SDHCI_TRANSFER_MODE and SDHCI_COMMAND writes is only
required for esdhc, but not necessarily for usdhc.  Different from
esdhc where the bits for transfer mode and command are all in the same
register CMD_XFR_TYP, usdhc has a newly introduced register MIX_CTRL
to hold transfer mode bits.  So it makes more sense to separate transfer
mode from command write for usdhc.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:01 -05:00
Maya Erez
881d926d9d mmc: core: move the cache disabling operation to mmc_suspend
Cache control is an eMMC feature and in therefore should be
part of MMC's bus resume operations, performed in mmc_suspend,
rather than in the generic mmc_suspend_host().

Signed-off-by: Maya Erez <merez@codeaurora.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:37:00 -05:00
Fabio Estevam
da86a5d4ef mmc: sdhci-esdhc-imx: Remove unused variables
3f175a6e5 (mmc: sdhci-esdhc-imx: remove ESDHC_CD_GPIO handling from IO
accessory) introduced the following build warnings:

drivers/mmc/host/sdhci-esdhc-imx.c:149:30: warning: unused variable 'boarddata' [-Wunused-variable]
drivers/mmc/host/sdhci-esdhc-imx.c:181:30: warning: unused variable 'boarddata' [-Wunused-variable]

Remove the unused variables.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:59 -05:00
Shawn Guo
60bf6396fb mmc: sdhci-esdhc-imx: name esdhc specific definitions with ESDHC_ prefix
Rename esdhc local definitions with ESDHC_ rather than SDHCI_ prefix,
so that we can distinguish them from SDHCI core definitions from name.

A couple of bit fields are also changed use shift for consistency and
better readability.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:58 -05:00
Shawn Guo
6b40d18295 mmc: sdhci-esdhc-imx: remove D3CD check from SDHCI_HOST_CONTROL write
SDHCI_CTRL_D3CD is not a standard SDHCI_HOST_CONTROL, so there is no
need to check it in SDHCI_HOST_CONTROL write at all.  Remove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:57 -05:00
Shawn Guo
ef4d0888bb mmc: sdhci-esdhc-imx: fix host version read
When commit 95a2482 (mmc: sdhci-esdhc-imx: add basic imx6q usdhc
support) works around host version issue on imx6q, it gets the
register address fixup "reg ^= 2" lost for imx25/35/51/53 esdhc.
Thus, the controller version on these SoCs is wrongly identified
as v1 while it's actually v2.

Add the address fixup back and take a different approach to correct
imx6q host version, so that the host version read gets back to work
for all SoCs.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:56 -05:00
Tony Prisk
893613b06f mmc: vt8500: Remove erroneous __exitp in wmt_mci_driver
With the __devinit/__devexit attributes having been removed, this
__exitp attribute causes an unused function warning and should be
removed as well.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:56 -05:00
Doug Anderson
9640639b09 mmc: dw_mmc: Remove DW_MCI_QUIRK_NO_WRITE_PROTECT
The original quirk was added in the change 'mmc: dw_mmc: add quirk to
indicate missing write protect line'.  The original quirk was added at
a controller level even though each slot has its own write protect (so
the quirk should be at the slot level).  A recent change (mmc: dw_mmc:
Add "disable-wp" device tree property) added a slot-level quirk and
support for the quirk directly to dw_mmc.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Will Newton <will.newton@imgtec.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:55 -05:00
Doug Anderson
55a6ceb2d5 mmc: dw_mmc: Handle wp-gpios from device tree
On some SoCs (like exynos5250) you need to use an external GPIO for
write protect.  Add support for wp-gpios to the core dw_mmc driver
since it could be useful across multiple SoCs.

With this change I am able to make use of the write protect for the
external SD slot on exynos5250-snow.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:54 -05:00
Doug Anderson
07b240411f mmc: dw_mmc: exynos: Remove code for wp-gpios
The exynos code claimed the write protect with devm_gpio_request() but
never did anything with it.  That meant that anyone using a write
protect GPIO would effectively be write protected all the time.

The handling for wp-gpios belongs in the main dw_mmc driver and has
been moved there.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:54 -05:00
Doug Anderson
a70aaa64da mmc: dw_mmc: Add "disable-wp" device tree property
The "disable-wp" property is used to specify that a given SD card slot
doesn't have a concept of write protect.  This eliminates the need for
special case code for SD slots that should never be write protected
(like a micro SD slot or a dev board).

The dw_mmc driver is special in needing to specify "disable-wp"
because the lack of a "wp-gpios" property means to use the special
purpose write protect line.  On some other mmc devices the lack of
"wp-gpios" means that write protect should be disabled.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Will Newton <will.newton@imgtec.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:52 -05:00
Fabio Estevam
fd63ac761a mmc: mxs-mmc: Fix warning due to incorrect type
Fixes the following warning when building with W=1 option:

drivers/mmc/host/mxs-mmc.c: In function 'mxs_mmc_adtc':
drivers/mmc/host/mxs-mmc.c:401:2: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]

The warning happens because 'i' is used in 'for_each_sg(sgl, sg, sg_len, i)' and should be made unsigned.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:51 -05:00
Fabio Estevam
e7be434acc mmc: mxs-mmc: Add MODULE_ALIAS()
Add an entry for MODULE_ALIAS().

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:50 -05:00
Thomas Petazzoni
6f1989bc98 mmc: mvsdio: add pinctrl integration
On many Marvell SoCs, the pins used for the SDIO interface are part of
the MPP pins, that are muxable pins. In order to get the muxing of
those pins correct, this commit integrates the mvsdio driver with the
pinctrl infrastructure by calling devm_pinctrl_get_select_default()
during ->probe().

Note that we permit this function to fail because not all Marvell
platforms have yet been fully converted to using the pinctrl
infrastructure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Peter <s.peter@mpl.ch>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-24 14:36:42 -05:00
Linus Torvalds
7ed214ac20 Char/Misc driver patches for 3.9-rc1
Here's the big char/misc driver patches for 3.9-rc1.
 
 Nothing major here, just lots of different driver updates (mei, hyperv, ipack,
 extcon, vmci, etc.).
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZJgACgkQMUfUDdst+ymhZgCgo2dn37r9uMCwgTSpxSq92Je5
 x8kAnRF1UnD6ZvySRIlLUBV5LW1YgFnK
 =i5HH
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver patches from Greg Kroah-Hartman:
 "Here's the big char/misc driver patches for 3.9-rc1.

  Nothing major here, just lots of different driver updates (mei,
  hyperv, ipack, extcon, vmci, etc.).

  All of these have been in the linux-next tree for a while."

* tag 'char-misc-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (209 commits)
  w1: w1_therm: Add force-pullup option for "broken" sensors
  w1: ds2482: Added 1-Wire pull-up support to the driver
  vme: add missing put_device() after device_register() fails
  extcon: max8997: Use workqueue to check cable state after completing boot of platform
  extcon: max8997: Set default UART/USB path on probe
  extcon: max8997: Consolidate duplicate code for checking ADC/CHG cable type
  extcon: max8997: Set default of ADC debounce time during initialization
  extcon: max8997: Remove duplicate code related to set H/W line path
  extcon: max8997: Move defined constant to header file
  extcon: max77693: Make max77693_extcon_cable static
  extcon: max8997: Remove unreachable code
  extcon: max8997: Make max8997_extcon_cable static
  extcon: max77693: Remove unnecessary goto statement to improve readability
  extcon: max77693: Convert to devm_input_allocate_device()
  extcon: gpio: Rename filename of extcon-gpio.c according to kernel naming style
  CREDITS: update email and address of Harald Hoyer
  extcon: arizona: Use MICDET for final microphone identification
  extcon: arizona: Always take the first HPDET reading as the final one
  extcon: arizona: Clear _trig_sts bits after jack detection
  extcon: arizona: Don't HPDET magic when headphones are enabled
  ...
2013-02-21 13:57:13 -08:00
Linus Torvalds
21eaab6d19 tty/serial patches for 3.9-rc1
Here's the big tty/serial driver patches for 3.9-rc1.
 
 More tty port rework and fixes from Jiri here, as well as lots of
 individual serial driver updates and fixes.
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmZYQACgkQMUfUDdst+ylJDgCg0B0nMevUUdM4hLvxunbbiyXM
 HUEAoIOedqriNNPvX4Bwy0hjeOEaWx0g
 =vi6x
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial patches from Greg Kroah-Hartman:
 "Here's the big tty/serial driver patches for 3.9-rc1.

  More tty port rework and fixes from Jiri here, as well as lots of
  individual serial driver updates and fixes.

  All of these have been in the linux-next tree for a while."

* tag 'tty-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits)
  tty: mxser: improve error handling in mxser_probe() and mxser_module_init()
  serial: imx: fix uninitialized variable warning
  serial: tegra: assume CONFIG_OF
  TTY: do not update atime/mtime on read/write
  lguest: select CONFIG_TTY to build properly.
  ARM defconfigs: add missing inclusions of linux/platform_device.h
  fb/exynos: include platform_device.h
  ARM: sa1100/assabet: include platform_device.h directly
  serial: imx: Fix recursive locking bug
  pps: Fix build breakage from decoupling pps from tty
  tty: Remove ancient hardpps()
  pps: Additional cleanups in uart_handle_dcd_change
  pps: Move timestamp read into PPS code proper
  pps: Don't crash the machine when exiting will do
  pps: Fix a use-after free bug when unregistering a source.
  pps: Use pps_lookup_dev to reduce ldisc coupling
  pps: Add pps_lookup_dev() function
  tty: serial: uartlite: Support uartlite on big and little endian systems
  tty: serial: uartlite: Fix sparse and checkpatch warnings
  serial/arc-uart: Miscll DT related updates (Grant's review comments)
  ...

Fix up trivial conflicts, mostly just due to the TTY config option
clashing with the EXPERIMENTAL removal.
2013-02-21 13:41:04 -08:00
Linus Torvalds
06991c28f3 Driver core patches for 3.9-rc1
Here is the big driver core merge for 3.9-rc1
 
 There are two major series here, both of which touch lots of drivers all
 over the kernel, and will cause you some merge conflicts:
   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.
   - remove CONFIG_EXPERIMENTAL
 
 If you need me to provide a merged tree to handle these resolutions,
 please let me know.
 
 Other than those patches, there's not much here, some minor fixes and
 updates.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
 weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
 =yWAQ
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...
2013-02-21 12:05:51 -08:00
Russell King
573f8c8d13 Merge branches 'fixes' and 'mmci' into for-linus 2013-02-20 14:35:45 +00:00
Wei WANG
c3481955f6 mfd: rtsx: Fix issue that booting OS with SD card inserted
Realtek card reader supports both SD and MS card. According to the
settings of rtsx MFD driver, SD host will be probed before MS host.
If we boot/reboot Linux with SD card inserted, the resetting flow of SD
card will succeed, and the following resetting flow of MS is sure to fail.
Then MS upper-level driver will ask rtsx driver to turn power off. This
request leads to the result that the following SD commands fail and SD card
can't be accessed again.

In this commit, Realtek's SD and MS host driver will check whether the card
that upper driver requesting is the one existing in the slot. If not, Realtek's
host driver will refuse the operation to make sure the exlusive accessing
at the same time.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-02-14 00:24:12 +01:00
Thomas Petazzoni
111936ff3b mmc: mvsdio: implement a Device Tree binding
This patch adds a simple Device Tree binding for the mvsdio driver, as
well as the necessary documentation for it. Compatibility with non-DT
platforms is preserved, by keeping the platform_data based
initialization.

We introduce a small difference between non-DT and DT platforms: DT
platforms are required to provide a clocks = <...> property, which the
driver uses to get the frequency of the clock that goes to the SDIO
IP. The behaviour on non-DT platforms is kept unchanged: a clock
reference is not mandatory, but the clock frequency must be passed in
the "clock" field of the mvsdio_platform_data structure.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Peter <s.peter@mpl.ch>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11 13:28:54 -05:00
Thomas Petazzoni
07728b77c0 mmc: mvsdio: use slot-gpio for card detect gpio
The MMC core subsystem provides in drivers/mmc/core/slot-gpio.c a nice
set of helper functions to simplify the management of the card detect
GPIO in MMC host drivers. This patch migrates the mvsdio driver to
using those helpers, which will make the ->probe() code simpler, and
therefore ease the process of adding a Device Tree binding for this
driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Peter <s.peter@mpl.ch>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11 13:28:53 -05:00
Thomas Petazzoni
3724482d4c mmc: mvsdio: use slot-gpio infrastructure for write protect gpio
The MMC core subsystem provides in drivers/mmc/core/slot-gpio.c a nice
set of helper functions to simplify the management of the write
protect GPIO in MMC host drivers. This patch migrates the mvsdio
driver to using those helpers, which will make the ->probe() code
simpler, and therefore ease the process of adding a Device Tree
binding for this driver.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Stefan Peter <s.peter@mpl.ch>
Tested-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11 13:28:53 -05:00
Shawn Guo
a043859043 mmc: sdhci-esdhc-imx: remove ESDHC_CD_GPIO handling from IO accessory
With commit 9444e07 (mmc: remove unncessary mmc_gpio_free_cd() call from
slot-gpio users) in place, the ESDHC_CD_GPIO handling in IO accessories
becomes unnecessary.  Remove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11 13:28:52 -05:00
Andy Shevchenko
8213af3b7a mmc: sdhci: introduce sdhci_update_clock helper to re-enable clock
There are three places where same piece of code is used. Let's split it
to a separate function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11 13:28:52 -05:00
Kevin Liu
740b7a44ae mmc: sdhci-pxav3: add IRQ wake up support
[cjb: The MMP3 architecture requires a registered interrupt to retire wfi
when waking from suspend.]

Signed-off-by: Jialing Fu <jlfu@marvell.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11 13:28:51 -05:00
Kevin Liu
ad080d7916 mmc: sdhci: add IRQ wake up support
Don't disable SD Host IRQ during suspend if it is wake up source.
Enable wakeup event during suspend.

Signed-off-by: Jialing Fu <jlfu@marvell.com>
Signed-off-by: Kevin Liu <kliu5@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2013-02-11 13:28:50 -05:00