35384 Commits

Author	SHA1	Message	Date
Linus Torvalds	fcc79e1714	Networking changes for 6.13. ... The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core ---- - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infra is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code -------------------------------------------- - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter --------- - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF --- - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols --------- - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API ---------- - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling ----------------- - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers ------- - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - adds support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Adds representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - adds support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implements page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - Add the dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - adds clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature Signed-off-by: Paolo Abeni <pabeni@redhat.com> -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmc8sukSHHBhYmVuaUBy ZWRoYXQuY29tAAoJECkkeY3MjxOkLEYQAIMM6Qjh0bh3Byr3gOS1xZzXG+APLjP4 9Jr0p3i+X53i90jvVqzeVO5FTc95MVHSKZ3kvPkDMXSLUaEJxocNHCI5Dzl/2/qL wWdpUB6/ou+jKB4Bn6Z8OvVODT7qrr0tVa9M2/fuKWrIsOU/ntIhG8EhnGddk5U/ vKPSf5PUIb81uNRnF58VusY3wrT1dEoh9VfJYxL+ST+inPxjEAMy6Y+lmlsjGaSX jrS+Pp9KYiUwl3Qt0AQs+cG4OHkJdjbnChrfosWwpkiyddO8klVq06+wX/TiSzfF b9VZtBfy/GZs3lkE1mQkcILdtX5pP3YHQdpsuxFfVI0JHVszx2ck7WdoRux/8F0v kKZsYcO7bH9I1wMFP66Ff9hIbdEQaeucK+KdDkXyPNMfP91Vzmfjii8IBxOC36Ie BbOeFUrXyTxxJ2u0vf/X9JtIq8bcrkNrSd1n1jlGPMqG3FVzsY95+Oi4qfsyeUbl lS1PlVTqPMPFdX54HnxM3y2rJjhd7iXhkvmtuXNjRFThXlOiK3maAPWlM1aZ3b8u Vjs4JFUsW0tleZG+RzANjsGjXbf7AiPUGLZt+acem0K+fcjG4i5aGIAJrxwa/ORx eG74IZRt5cOI371W7gNLGHjwnuge8tFPgOWcRP2eozNm7jvMYALBejYS7eWUTvaf THcvVM+bupEZ =GzPr -----END PGP SIGNATURE----- Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...	2024-11-21 08:28:08 -08:00
Linus Torvalds	14d0e1a09f	soc: driver updates for 6.12 ... Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/soc, drivers/bus, and drivers/memory, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc+DsUACgkQYKtH/8kJ UifNWRAA49Ife6ybk8jamM9Bd07kFmHdaad0ttgUtx7HMJBg51+JLNFwTVYM2p6b A1SWCsS+sxP1RBKuhgZrt+sDPAoDlYLQaF1WQB7cs4FXqYpc2Po8BmBili5BV635 Zv/9C9ofsWiWg9pGy0rRFvHW0W48lBoQM61YZzQc85pyEod5RSgji/jUEzvBvhln V3hegw0myBecJ8b7jH9Fjre3gMSC65amlXemkDS/7FGXXA7V3BKmALglJj6BR4RD QtQgFOAe/XGmbOguMvZJvVbMnW8PbmS5k50ppixBPAultHflkdg4DdnIW59yUfK+ Mr98sW8U/LirACX93uwSzBNY1m5cW+GP4DoemxIUIQAvXxR4HroLoJdHS+BfWH+H Pn9dgSZu/dUlxfzTYzvd0B5TUjDGkYubVtQ00PLOWFHNfhZSmCqGl5J5NjgINRCf mBwhvUBYXgvNrOaEnll2kt2ONbxT7WAJAcKdnXKDjG4nPDyXBLRYoE4gro4Iii7+ 1OA7NlInwW+XFfpIIJeYa+AOTgb0/MKdONG+CkUnn6Bc9+B7Xdg0w0VDlmsVbXae fRyaI6XKmyNtmFZM4+gUxIhzvOgYpOoMITQJHcHSYuzWQpsnkkRas9aTCyBSLAd4 D59cQwqtmE9rCfp3A7heMeKCIRtfJzoWnW0bjJAPSccLyJP99rI= =xeCE -----END PGP SIGNATURE----- Merge tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC driver updates from Arnd Bergmann: "Nothing particular important in the SoC driver updates, just the usual improvements to for drivers/soc and a couple of subsystems that don't fit anywhere else: - The largest set of updates is for Qualcomm SoC drivers, extending the set of supported features for additional SoCs in the QSEECOM, LLCC and socinfo drivers.a - The ti_sci firmware driver gains support for power managment - The drivers/reset subsystem sees a rework of the microchip sparx5 and amlogic reset drivers to support additional chips, plus a few minor updates on other platforms - The SCMI firmware interface driver gains support for two protocol extensions, allowing more flexible use of the shared memory area and new DT binding properties for configurability. - Mediatek SoC drivers gain support for power managment on the MT8188 SoC and a new driver for DVFS. - The AMD/Xilinx ZynqMP SoC drivers gain support for system reboot and a few bugfixes - The Hisilicon Kunpeng HCCS driver gains support for configuring lanes through sysfs Finally, there are cleanups and minor fixes for drivers/{soc, bus, memory}, including changing back the .remove_new callback to .remove, as well as a few other updates for freescale (powerpc) soc drivers, NXP i.MX soc drivers, cznic turris platform driver, memory controller drviers, TI OMAP SoC drivers, and Tegra firmware drivers" * tag 'soc-drivers-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (116 commits) soc: fsl: cpm1: qmc: Set the ret error code on platform_get_irq() failure soc: fsl: rcpm: fix missing of_node_put() in copy_ippdexpcr1_setting() soc: fsl: cpm1: tsa: switch to for_each_available_child_of_node_scoped() platform: cznic: turris-omnia-mcu: Rename variable holding GPIO line names platform: cznic: turris-omnia-mcu: Document the driver private data structure firmware: turris-mox-rwtm: Document the driver private data structure bus: Switch back to struct platform_driver::remove() soc: qcom: ice: Remove the device_link field in qcom_ice drm/msm/adreno: Setup SMMU aparture for per-process page table firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID firmware: arm_scpi: Check the DVFS OPP count returned by the firmware soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404 soc: qcom: llcc: Flip the manual slice configuration condition dt-bindings: firmware: qcom,scm: Document sm8750 SCM firmware: qcom: uefisecapp: Allow X1E Devkit devices misc: lan966x_pci: Fix dtc warn 'Missing interrupt-parent' misc: lan966x_pci: Fix dtc warns 'missing or empty reg/ranges property' soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC ...	2024-11-20 15:40:54 -08:00
Linus Torvalds	9c39d5ab45	soc: devicetree updates for 6.13 ... This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform wtih DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newlyad added features in existing boards as well as cleanups and minor bugfixes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc92V4ACgkQYKtH/8kJ Uie7+xAA5BIu2fSl+cCCOLdWvNulgYJBZfgOC+1vay3A3zykTR5Hd/X4/GOetqb6 uhCJ7MER0md2PBCdffN0JDuDnvBGdOEbHghsY3iqqwP4ad+bk4+Ib/dxgM0uid3t W2NykLvmXmjFJiwjvMKE4aSPi+lCskLehPC05IIJvM/DplGflIoq7Rf+q5WIvStT K5kpluJBD81oQkfBn7FwVJWeM6OZ1CZg413m0PNMoojd6SzyPVNGnd004qEHfwkv Ra1w9cHM2+zagPrkTrFp0bpxfUYwoXiP8uPq9crXrhgeq4JmQBHuTR0ek+mMC2nI aRgi91za8YPgC8APXks64BBqXCxHVse9n228MpldMAabURez5wMkufNFfQc6yLks AhQxD2joVFS+i/pE8WyFlS3/aopNUzIbqVyIhpYiYBLz8xQBSv7KjqySRufrBEhP lMA548uDQK5p1TRnl8L6cDXdHTN9MbqtREIozBeO20iolHJtqLBcw4erZFhwnJsP 2QQVN9P8AXOE/U/RZcV8Wfm7kUoU4FI29G3XlmUnpBmCHQd3Ql2Xv56gaDaAtb3s hF83uTA8bKjby9Xu0c9JQREeNsLEmI/WwuUWlSEcn1cGBZ5ahg8FMta55H8tpX8O OizWoPviwUar7HFASA/ZvN0KoPgq/a8HWRXT+Q+/xBBqnHshtLk= =Ha1w -----END PGP SIGNATURE----- Merge tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull SoC devicetree updates from Arnd Bergmann: "This release adds the devicetree files for an impressive number of new SoC variants, though as expected these are all related to others we already support: - The microchip sam9x7 devicetree is now added, after the device driver and platform code has already made it in. This is likely the last ARMv5 (!) platform to ever get added, updating the 20+ year old at91/sam9 platform with DDR3 memory and gigabit ethernet. - On the Apple platform, there are now devicetree files for a number of A-series SoCs in addition to the M-series ones, these are used primarily in phones and tablets, but are closely related to the already supported chips. - Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in older Samsung Galaxy phones. - Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end laptops. - Rockchip RK3528 and RK3576 are new variants of their TV box and Tablet chips, still using the older ARMv8.0 cores from RK3328/RK3399 but with a newer process and other improvements from the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also added, these are just lower-cost versions of their normal counterparts. - TI J742S2 is a feature-reduced version of the J784s4 industrial/automotive SoC, with fewer CPU cores. - Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM (Cortex-A53) core, at this point support is only added for running on the RISC-V side on the LicheeRV Nano board. A total of 92 new .dts files describing individual machines is added, which must be a new record. The majority of these is for the newly added chips above, notably all the Apple phones and tablets. The other new machines include nine industrial/embedded boards with NXP i.MX6 or i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110. As usual there are also many newly added features in existing boards as well as cleanups and minor bugfixes" * tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits) arm64: dts: apm: Remove unused and undocumented "bus_num" property arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property arm64: dts: lg131x: Update spi clock properties arm64: dts: seattle: Update spi clock properties arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25 arm64: dts: rockchip: add Radxa ROCK 5C dt-bindings: arm: rockchip: add Radxa ROCK 5C arm64: dts: rockchip: orangepi-5-plus: Enable GPU arm64: dts: rockchip: enable USB3 on NanoPC-T6 arm64: dts: rockchip: adapt regulator nodenames to preferred form arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2 arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5 arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer ...	2024-11-20 15:26:46 -08:00
Linus Torvalds	9f5a6a1fe6	media updates for v6.13-rc1 ... -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmc8Q80ACgkQCF8+vY7k 4RX+3g//dMBSmu3uC9OiXyfw3aB8w62RMeieRxSVPMdkiacUm1J8HyzHnXPXIUn3 tfBT9E/YbeFZ+PlrOXRDUi1i8jmN47VuwRe01rxxF/FdlYknC2eGH3Ug9DW90VBh wmZ1kSjyjizwDkKAm+Jc2xynTaX+iInJ4Kzp9RStDZPuaqj2Qzd1qVRk2FJwAYRh 5dTpi0W1PexjxQXDIcnHi/tPapGLSP5PnrunrAJR0tYfp60wrKMaxTO36yJzbnDP MxkF8A+9dWtePRqoPWxPIvnOVu/+Twc730xkQp62qPvwEM2HZRtU7cgQFlWos6p/ ijK2i6sAQslMhQ9oIyKlO7HpXX60rjE3XtdzEtGxBq6DyIqx1riN+OqJB2C4Cdsr 2qUET8aTIisPURw1ecNAbthvLt8tljBe08/eX0GYaWFjALJx3Pds23ahH8hw295N o3SY5NaGmO9Tg6HzYLSwfBmxgGpWDuRic6PDCVKok5mS5D1+uV/tu8fQFiNiFNVe Okufjvo7HtZ3+rWR90b/Udpz/lBB/dceppnUX2iKevrG190VHxEwJ2pQKkfdH9ha LUZQajikiv5rbGxKIGrjrCnjrJ24TC2vCSPhkgOb1r91LUY4RUV61c3hZbH73rzQ 2Ykwvmy+gpE4GEYiJRfSR6KlXdBruMa5FToLUHEK0uBMSlG5k7Q= =25BS -----END PGP SIGNATURE----- Merge tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - removal of the old omap4iss media driver - mantis: remove orphan mantis_core.h - add support for Raspberypi CFE - uvc driver got a co-maintainer - main media tree moved to git://linuxtv.org/media.git - lots of driver cleanups, updates and fixes * tag 'media/v6.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (233 commits) docs: media: update location of the media patches MAINTAINERS: update location of media main tree media: MAINTAINERS: Add Hans de Goede as USB VIDEO CLASS co-maintainer media: platform: samsung: s5p-jpeg: Remove deadcode media: qcom: camss: Add MSM8953 resources media: dt-bindings: Add qcom,msm8953-camss media: qcom: camss: implement pm domain ops for VFE v4.1 media: platform: exynos4-is: Fix an OF node reference leak in fimc_md_is_isp_available media: adv7180: Also check for "adi,force-bt656-4" media: dt-bindings: adv7180: Document 'adi,force-bt656-4' media: mgb4: Fix inconsistent input/output alignment in loopback mode media: replace obsolete hans.verkuil@cisco.com alias Documentation: media: improve V4L2_CID_MIN_BUFFERS_FOR_*, doc media: vicodec: add V4L2_CID_MIN_BUFFERS_FOR_* controls media: atomisp: Add check for rgby_data memory allocation failure media: atomisp: remove redundant re-checking of err media: atomisp: Fix spelling errors reported by codespell media: atomisp: Remove License information boilerplate media: atomisp: Fix typos in comment media: atomisp: hmm_bo: Fix spelling errors in hmm_bo.h ...	2024-11-20 14:01:15 -08:00
Linus Torvalds	b57807cbbf	hid-for-linus-2024111801 ... -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIVAwUAZzusZKZi849r7WBJAQKH9Q/+Llff1j+bP/W2E987vDy8zfFrMHR1nTrB nJb1mXKCp1AG+HcrrJh+9nVZXaXJtoduJ83wufxZoeK2jT06ij+TXPRW3JJcYooO C1UK8CI6fQBzTzKtDLRdBxv8MVTyuFI8KkBasDQQEJafRSN4rW007zA5B+EftcXe N9eb1+BiSbIMDtFdLw6N7kvDwfUj9iWO34cmH7ahv1Y0mj94OCRylN3p3fsbvkjG N5VP0Dm47X5H3OhS85HuVVskpFeMWBnNnLBFCxSoSELhl9pbXcriNQtUrk+uyHfL ObGrUajJlw6rrlCwugonJ5a6HmpWcfZBaXlvkP1b/q4oAePQ+Zuv0RStvPeqiM07 3m4XJf8kcRhMnUVYKo4nv9kVedK+EKu/HBZQsgTdDlTKV3BXpktt7PRD/WUKZ7yG kr/JWOlJho2Lzg7ky/47aJOgRfaLJzhPx1vSoSHrglB4L+4b+J0wZassc/iTkA0Q 9JS1Jci41oAcMzDW4KMkE2GIyXeTeSUTJH54DAm4+SXwkR1Sgn0K+ogceRc86ooA ZQu8touqvHBrVekC6jaFAA92IekLO5UFmiUcbQ1MHFdjx5Y9nruwKd2DulLV9cb9 XdHZMzT2RSdL1DLh5LlXRhLOSplhg0sUj9/XkCHIMX2GXa+ZNgFEA9VxDYBnB+dJ XZsGAHtgWQg= =J6g1 -----END PGP SIGNATURE----- Merge tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - improvement in the way hid-bpf coexists with specific drivers (others than hid-generic) that are already bound to devices (Benjamin Tissoires) - removal of three way-too-aggressive BUG_ON()s from HID drivers (He Lugang) - assorted cleanups and small code fixes to HID core (Dmitry Torokhov, Yan Zhen, Nathan Chancellor, Andy Shevchenko) - support for Corsair Void headset family (Stuart Hayhurst) - Support for Goodix GT7986U SPI (Charles Wang) - initial vendor-specific driver for Kysona, currently adding support for Kysona M600 (Lode Willems) - other assorted code cleanups and small bugfixes all over the place * tag 'hid-for-linus-2024111801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (40 commits) HID: multitouch: make mt_set_mode() less cryptic HID: hid-goodix-spi: Add OF supports dt-bindings: input: Goodix GT7986U SPI HID Touchscreen HID: hyperv: streamline driver probe to avoid devres issues HID: magicmouse: Apple Magic Trackpad 2 USB-C driver support HID: rmi: Add select RMI4_F3A in Kconfig HID: wacom: Interpret tilt data from Intuos Pro BT as signed values HID: steelseries: Add capacity_level mapping HID: steelseries: Fix battery requests stopping after some time HID: hid-goodix: Fix HID get/set feature operation overwritten problem HID: hid-goodix: Return 0 when receiving an empty HID feature package HID: bpf: drop use of Logical|Physical|UsageRange HID: bpf: Fix Rapoo M50 Plus Silent side buttons HID: bpf: Fix NKRO on Mistel MD770 HID: replace BUG_ON() with WARN_ON() HID: wacom: Set eraser status when either 'Eraser' or 'Invert' usage is set HID: Kysona: add basic online status HID: Kysona: check battery status every 5s using a workqueue HID: Kysona: Add basic battery reporting for Kysona M600 HID: Add IDs for Kysona ...	2024-11-20 13:57:40 -08:00
Linus Torvalds	e6de688e93	Devicetree updates for v6.13: ... Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmc7qaoACgkQ+vtdtY28 YcN54g/+Ifz4hQTSWV+VBhihovMMPiQUdxZ+MfJfPnPcZ7NJzaTf+zqhZyS4wQou v0pdtyR0B1fCM/EvKaYD+1aTTAQFEIT5Dqac+9ePwqaYqSk+yCTxyzW9m+P3rTPV THo8SGRss7T+Rs+2WaUGxphTJItMGIRdbBvoqK+82EdKFXXKw2BSD8tlJTWwbTam 9xkrpUzw7f4FvVY8vVhRyOd5i8/v+FH8D65DMIT6ME9zRn4MzKVzCg6udgYeCBld C2XbV+wnyewtjrN2IX+2uQ2mheb7yJu3AEI3iFR5x/sRrsSLpisxrUl38xOOpxrM XxYtHgE3omjagQ+y+L2PMthlKvhFrXVXIvhUH8xxje5z1Vyq3VMfiABkHlMpAnys 5LY4xEhvqDkPNo65UmjMiHxGW/xtcKsmAZBOp+HLerZfCJIFvl380fi8mNg/Sjvz 7ExCSpzCPsHASZg7QCTplU3BUtg+067Ch/k8Hsn/Og73Pqm3xH4IezQZKwweN9ZT LC6OQBI7C3Yt1hom9qgUcA4H4/aaPxTVV7i0DGuAKh8Lon6SaoX2yFpweUBgbsL/ c9DIW4vbYBIGASxxUbHlNMKvPCKACKmpFXhsnH5Waj+VWSOwsJ8bjGpH8PfMKdFW dyJB/r94GqCGpCW7+FC1qGmXiQJGkCo89pKBVjSf4Kj45ht/76o= =NCYS -----END PGP SIGNATURE----- Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "Bindings: - Enable dtc "interrupt_provider" warnings for binding examples. Fix the warnings in fsl,mu-msi and ti,sci-inta due to this. - Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and altr,fpga-passive-serial to DT schema format - Add some documentation on the different forms of YAML text blocks which are a constant source of review comments - Fix some schema errors in constraints for arrays - Add compatibles for qcom,sar2130p-pdc and onnn,adt7462 DT core: - Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n - Add some warnings on deprecated address handling - Rework early_init_dt_scan() so the arch can pass in the phys address of the DTB as __pa() is not always valid to use. This fixes a warning for arm64 with kexec. - Add and use some new DT graph iterators for iterating over ports and endpoints - Rework reserved-memory handling to be sized dynamically for fixed regions - Optimize of_modalias() to avoid a strlen() call - Constify struct device_node and property pointers where ever possible" * tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits) of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible of/address: Rework bus matching to avoid warnings of: WARN on deprecated #address-cells/#size-cells handling of/fdt: Don't use default address cell sizes for address translation dt-bindings: Enable dtc "interrupt_provider" warnings of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml media: xilinx-tpg: use new of_graph functions fbdev: omapfb: use new of_graph functions gpu: drm: omapdrm: use new of_graph functions ASoC: audio-graph-card2: use new of_graph functions ASoC: audio-graph-card: use new of_graph functions ASoC: test-component: use new of_graph functions of: property: use new of_graph functions of: property: add of_graph_get_next_port_endpoint() of: property: add of_graph_get_next_port() of: module: remove strlen() call in of_modalias() ...	2024-11-20 13:19:25 -08:00
Linus Torvalds	38556294b8	MMC core: ... - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7NnoXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnQPRAAkxvhptCjKuLBIMBrNZglQElp Ncm8fXDiS72CvLwC3bp7rxognCKLVQGWc8GrxcBOxMSB5eiDyPe6xcLLQ2Zrm4l/ msnfP29VDtmWw3K1iC2Uzo0vlMWYyRFX0OK3fz3d6WL0dE6TXy5adsdy9BmdxGXk vpDgiTWkSZcoT/upuXs8/0N87eSgLUFzZ8uPNP+aHtF4AVWIwhJ3Y1MKqdfGrUlw 7b9bFeh6DelA+jGDxsPsqSwDBh2CDDP3YaPFYf4yyaeTRJmp6DMSEqjDifBa+hDn wkwNGj9bN05HeRN3TfsF/Z22LcaPcbWlLYh8p06h+Ws+R/2KxAXdV3oWnKNLQB9R 5WIdgb7HBD2OS2RymPeHygPPGt6zgxk55UfTBwchg7fHyugXvpcT/JDS2mbPQT4w Ty4s217wBn6Kkt4/8fWhHyG/rKBTq02Etmdery4AAM49M2iPvf+edio53FLnskrq xB8kYn5UZkk9dQ+GseC4+tXe8A1G/sxh/E2aJ/b15Mc9Mh1/BqL3g2532A+z6x5Q 8o4nyztCJhKWtfYxo1slnWzF+Axrz6ZXgVYh5MecMk9EjKVcX6oN+FGpiK/cg3dQ 7FFyzf+YGwdnOhuHhdBG0NTbvKvIRA0rMQ3xvhsfXqCI206j7FZNpWOxXYn36Lgt oZlprarw04AoECCg5Ko= =LGdl -----END PGP SIGNATURE----- Merge tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Add support for Ultra Capacity SD cards (SDUC, 2TB to 128TB) - Add support for Ultra High-Speed II SD cards (UHS-II) - Use a reset control for pwrseq_simple - Add SD card quirk for broken poweroff notification - Use GFP_NOIO for SD ACMD22 MMC host: - bcm2835: Introduce proper clock handling - mtk-sd: Add support for the Host-Software-Queue interface - mtk-sd: Add support for the mt7988/mt8196 variants - mtk-sd: Fix a couple of error paths in ->probe() - sdhci: Add interface to support UHS-II SD cards - sdhci_am654: Fixup support for changing the signal voltage level - sdhci-cadence: Add support for the Microchip PIC64GX variant - sdhci-esdhc-imx: Add support for eMMC HW-reset - sdhci-msm: Add support for the X1E80100/IPQ5424/SAR2130P/QCS615 variants - sdhci-of-arasan: Add support for eMMC HW-reset - sdhci-pci-gli: Add UHS-II support for the GL9767/GL9755 variants MEMSTICK: - A couple of minor updates" * tag 'mmc-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (78 commits) mmc: pwrseq_simple: Handle !RESET_CONTROLLER properly mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting mmc: mtk-sd: Fix error handle of probe function mmc: core: Correction a warning caused by incorrect type in assignment for UHS-II mmc: sdhci-esdhc-imx: Update esdhc sysctl dtocv bitmask mmc: sdhci-esdhc-imx: Implement emmc hardware reset mmc: core: Correct type in variable assignment for UHS-II mmc: sdhci-uhs2: correction a warning caused by incorrect type in argument mmc: sdhci-uhs2: Remove unnecessary variables mmc: sdhci-uhs2: Correct incorrect type in argument mmc: sdhci: Make MMC_SDHCI_UHS2 config symbol invisible mmc: sdhci-uhs2: Remove unnecessary NULL check mmc: core: Fix error paths for UHS-II card init and re-init mmc: core: Add error handling of sd_uhs2_power_up() mmc: core: Simplify sd_uhs2_power_up() mmc: bcm2835: Introduce proper clock handling mmc: bcm2835: Fix type of current clock speed dt-bindings: mmc: Add sdhci compatible for QCS615 mmc: core: Use GFP_NOIO in ACMD22 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible ...	2024-11-20 12:51:32 -08:00
Linus Torvalds	75f2b37dd0	pmdomain core: ... - Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd() -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmc7Y+QXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCmbrw/9FVdo3+mo6EZne+Zsxc0+3N9G bRwkgyCB8WSFy6MHD1TRyP9u8bFgFDitSxcUGuBW0l9t1le3IcsYwfbTEEZpUkU4 iasPoZoFKA3Akfr7tvQpIpSNh8MIBMFy7CfxWpsfiHlmwrIH6oT6HmlwWwFsbVxh Fv8xA5SOE1KRHq0Aos23h7MizPsav/PYSh/4Ga5l6ZBlm40c16cE0i0M4RRUnoNY FmUBe57HoumDd05ToFR9wrqMEVWbAJHV4xZpZwnfYUhwGrgbxUWI/1FIfwxtob12 OExPr9kiV8/f8Kfp3E3ul0R8q8XYaYZaT3R7nF5QOngLZCCpD5H9aWEcAihUryBh Ol9Wao0Ku1JqLc776bjwf92ozFDtx0yUN/8LXmQgUu+e+MC3eAOrsls+U4731p+Y V80mvBpqn8AbX7LOjJvmbOhK6Qnm0cHo2cs0afBSS5c9RBcCWuEy9d7n8dks6JX2 7H6ySDaKoEEK06V6VzEKdHQoRFkmw95w4n7Ei3OL0cxNLcT1ILGA1+O7PPw+6h4T 3UnSik6szZCBXFFaDsw4J53HZACVZWbkyrk5Dbsigte8lh6e2VI+qd9whd46nuCY Sn4vJ399FJvXBuEIu+8yymGwn/NSpgd6ybpkwdDNJ+fItbes7DQhtxM6k74ANAhf 0irf1o4Yv0S5W+pXBAM= =SpyF -----END PGP SIGNATURE----- Merge tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Set the required dev for a required OPP during genpd attach - Add support for required OPPs to dev_pm_domain_attach_list() pmdomain providers: - ti: Enable GENPD_FLAG_ACTIVE_WAKEUP flag for ti_sci PM domains - mediatek: Add support for MT6735 PM domains - mediatek: Use OF-specific regulator API to get power domain supply - qcom: Add support for the SM8750/SAR2130P/qcs615/qcs8300 rpmhpds pmdomain consumers: - Convert a couple of consumer drivers to *_pm_domain_attach|detach_list() opp core: - Rework and cleanup some code that manages required OPPs - Remove *_opp_attach|detach_genpd()" * tag 'pmdomain-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits) pmdomain: qcom: rpmhpd: Add rpmhpd support for SM8750 dt-bindings: power: qcom,rpmpd: document the SM8750 RPMh Power Domains pmdomain: imx: Use of_property_present() for non-boolean properties pmdomain: imx: gpcv2: replace dev_err() with dev_err_probe() pmdomain: ti-sci: Use scope based of_node_put() to simplify code. pmdomain: ti-sci: Add missing of_node_put() for args.np pmdomain: ti-sci: set the GENPD_FLAG_ACTIVE_WAKEUP flag for all PM domains pmdomain: mediatek: Add support for MT6735 pmdomain: qcom: rpmhpd: add support for SAR2130P dt-bindings: power: Add binding for MediaTek MT6735 power controller dt-bindings: power: rpmpd: Add SAR2130P compatible OPP: Drop redundant *_opp_attach|detach_genpd() cpufreq: qcom-nvmem: Convert to dev_pm_domain_attach|detach_list() media: venus: Convert into devm_pm_domain_attach_list() for OPP PM domain drm/tegra: gr3d: Convert into devm_pm_domain_attach_list() OPP: Drop redundant code in _link_required_opps() pmdomain: core: Set the required dev for a required OPP during genpd attach pmdomain: core: Manage the default required OPP from a separate function PM: domains: Support required OPPs in dev_pm_domain_attach_list() OPP: Rework _set_required_devs() to manage a single device per call ...	2024-11-20 12:44:59 -08:00
Linus Torvalds	131561f2ca	gpio updates for v6.13-rc1 ... GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - add a driver for the GPIO functionality of the MFD Congatec Board Controller - add a driver for the PolarFire GPIO controller - add a driver supporting the GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmc7INQACgkQEacuoBRx 13Kotg/8DDkhZ01Qc2uR817DjCdbalS0TDr4FYn/XusyeBEgNgQDm/TcfmIMiU4M Dazb7pOXfEc4VJqPTSpvqsTwTyMLN1pi58ZXZZA760rf8O8O+8c/cogVk36QK+IB 3LX/w7JFFME6cC3kZ+mV3a6Cdxb4UIQdv1rWtLX8MjCiJ5+ax33VS0pe67n8sOft A6LeYwFr1ngk9NDg+OrFzExMTCGqk4aUYWiLd8ki3bw5ZMYzLwuenWLONQo3HOP5 QuWQV+wF913mjB53omiZ8heJ7hN3ez071W4rXXPGXn5sAGipqJKWk6Nvx1wRZapD d+6XozBLGNEIcPvWJAWDfxnHmEjVpFyhavc9Id569DcQ0WVLm+CFPkNmp4mgOoOB k8f6R2CA2lheIKTRUk/Lt+Cu2+Za/07bM/WsxL6x/oCXZwL6NA5P+8VoNcBCDKrF PVUz7Jad6FVHkxySqwX4clHLW173pqyG47RJ7KxVv7g6g+YNW0WCM7crS+czRWIq KUT9sumw1dEFlYZ9IGZTuP/Pvur8f17powkS8VuYJ02N1yq3OhQZb52NX8stsmkW P6CsdZe9KRoGQUJp9nYVE5j09oz1gqqdbLdn4Byqg6G50w2U1mLNaWE1rtWLtcTx h7npUNOaX44JafnClFJvv1R9ovkuzgTaymEL4qo3QB6COHdvjlA= =ON7q -----END PGP SIGNATURE----- Merge tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio updates from Bartosz Golaszewski: "Three new drivers, support for some new models in existing ones and lots of various tweaks and improvements across the board (switching to using recommended APIs, code shrink and simplification, etc.). Also a new feature in the character device uAPI where we now notify the user-space about changes triggered by in-kernel users as well, not only when they were done by other user-space agents. Summary: GPIOLIB core: - use the new mem_is_zero() instead of memchr_inv(s, 0, n) - don't store debounce period twice needlessly - clean-up debugfs handling - remove leftover comments referring to no longer used spinlocks - unduplicate some operations like SRCU locks and initializing GPIO descriptors - constify the sysfs class struct - use lock guards in GPIO sysfs code - update GPIO uAPI internal flags all at once atomically for consistency with other places - modify the behavior of the sysfs interface by no longer exporting lines that are named inside the driver code or board files with the sysfs links bearing the line names as this has for many years been largely unused due to the prevalence of DT, ACPI and firmware nodes over board files and made the API inconsistent - for GPIO interrupt providers: free irqs that are still requested by users when removing the chip GPIO uAPI: - notify user-space about changes to GPIO lines' state (requested, released, reconfigured) triggered from the kernel as well (until now we'd only do this for changes triggered from user-space) - to that end: modify the internal workings of the notification mechanism by switching to an atomic notifier which allows us to send events from atomic context - also to that end store the debounce period in the GPIO descriptor struct and not in the character device context struct - while at it, also cover the corner-case of users introducing changes over sysfs while others watch them via the character device - don't report GPIO lines requested as interrupts as "used" to user-space as it can still request them as GPIOs New drivers: - GPIO part of the MFD Congatec Board Controller - PolarFire GPIO controller - GPIOs on FTDI FT2232H Driver improvements: - use generic device property accessors instead of OF-specific ones across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci, ts4900, xilinx, mvebu) - use devres helpers to simplify error paths and either shrink or entirely remove the driver's remove() callback (grgpio, amdpt, menz127, max730x, ftgpio010, 74x164, ljca) - use helper variables to store the address of pdev->dev and avoid some line-breaks - use device_for_each_child_node_scoped() to avoid having to put the fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi) - use a scoped bitmap to simplify the code and drop goto labels in gpio-aggregator - drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby, xilinx) - add support for new models to gpio-aspeed, gpio-rockchip and gpio-dwapb - clean-up ACPI handling and some other bits in gpio-xgene-sb - replace deprecated PCI functions in pcie-idio-24 and pci-idio-16 - allow to build davinci and mvebu drivers with COMPILE_TEST=y - remove dead code in gpio-mb86s7x - switch back to using platform_driver::remove() (after the conversion to remove_new()) across the GPIO drivers - remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop this deprecated symbol - convert the gpio-altera driver to no longer pull in the deprecated legacy-of-mm-gpiochip.h header - use of_property_present() instead of of_property_read_bool() in gpiolib-of and gpio-rockchip - allow to build the tegra186 driver on Tegra234 platforms in Kconfig Late fixes: - add a missing return value check after devm_kasprintf() to gpio-grgpio DT bindings: - document the ngpios property of gpio-mmio - add support for a new aspeed model - fix the example for st,nomadik-gpio Other: - kernel doc and comments tweaks - fix typos in TODO - reorder headers alphabetically in some drivers - fix incorrect format specifiers in gpio tools" * tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits) gpio: tegra186: Allow to enable driver on Tegra234 gpio: grgpio: Add NULL check in grgpio_probe tools: gpio: Fix several incorrect format specifiers gpio: mpfs: add CoreGPIO support gpio: rockchip: support new version GPIO gpio: rockchip: change the GPIO version judgment logic gpio: rockchip: explan the format of the GPIO version ID gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n) MAINTAINERS: add gpio driver to PolarFire entry gpio: Get rid of GPIOF_ACTIVE_LOW USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW leds: gpio: Avoid using GPIOF_ACTIVE_LOW Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW gpio: Use of_property_present() for non-boolean properties gpio: mpfs: add polarfire soc gpio support gpio: altera: Drop legacy-of-mm-gpiochip.h header gpio: pcie-idio-24: Replace deprecated PCI functions gpio: pci-idio-16: Replace deprecated PCI functions ...	2024-11-20 12:37:06 -08:00
Linus Torvalds	7d75606665	pwm: Changes for v6.13-rc1 ... This pull request prominently contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. So I expect you will get a part of this tree also via the iio pull request for 6.13-rc1 (tag pwm/duty_offset-for-6.13-rc1). Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmc7DoAACgkQj4D7WH0S /k5tEgf/QJY8mAPPZR45dDo+GdUnZAaV85sseOezeApjB6kMYXKsKWoDC0uQ9m40 t7zkR8rXCk84rYSg4fGpcWL12v03n8cXmABkJUsqkUkLCcU/pifKzxanC25IWMH1 DGCW8tev4/NSe2ud9kLmFR/p85aioIW47Az3QH096Wv+Y5ij3v5e8PHBIaSiWHlb gfQI1XWerHSbAZexF132zGZOD/TBWb6djAQKACh5KWBPWB54zK3n3ngxoOCSMKSh Li8nfVyy32mPurLfTqaTaAHg7uGrcCGOVhqnXSQiuUayMlV/T7FX/uwfF/X/YKFm iqIPoYeUhLHmHJkHLACtPzUajkTJbg== =3d9l -----END PGP SIGNATURE----- Merge tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm updates from Uwe Kleine-König: "This contains a new abstraction for PWM waveforms that is more expressive that the legacy one. Compared to the old abstraction it contains a duty_offset member instead of polarity. This new abstraction is already used in an ADC driver merged into the iio tree. The new API requires changes to the lowlevel drivers. For now there are two drivers that are converted to the new API (axi-pwmgen and stm32). Converted drivers continue to work with the old API. Drivers not yet converted only work with the older API. Otherwise it's the usual collection of fixes, cleanups and dt doc updates. This time around thanks go to Andy Shevchenko, Clark Wang, Conor Dooley, David Lechner, Dimitri Fedrau, Frank Li, Jun Li, Kelvin Zhang, Krzysztof Kozlowski, Nuno Sa, Shen Lichuan and Trevor Gamblin for code contributions, testing and review" * tag 'pwm/for-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: Assume a disabled PWM to emit a constant inactive output pwm: core: export pwm_get_state_hw() pwm: core: use device_match_name() instead of strcmp(dev_name(... dt-bindings: pwm: adi,axi-pwmgen: Increase #pwm-cells to 3 pwm: imx27: Use clk_bulk_*() API to simplify clock handling pwm: imx27: Workaround of the pwm output bug when decrease the duty cycle pwm: axi-pwmgen: Enable FORCE_ALIGN by default pwm: axi-pwmgen: Rename 0x10 register dt-bindings: pwm: amlogic: Document C3 PWM pwm: axi-pwmgen: Create a dedicated function for getting driver data from a chip pwm: atmel-tcb: Use min() macro pwm: stm32: Fix error checking for a regmap_read() call pwm: Add kernel doc for members added to pwm_ops recently pwm: Reorder symbols in core.c pwm: stm32: Implementation of the waveform callbacks pwm: axi-pwmgen: Implementation of the waveform callbacks pwm: Add tracing for waveform callbacks pwm: Provide new consumer API functions for waveforms pwm: New abstraction for PWM waveforms pwm: Add more locking	2024-11-20 12:34:22 -08:00
Linus Torvalds	f2ef39727a	spi: Updates for v6.13 ... The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers. The Rockchip cleanups -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7QdQACgkQJNaLcl1U h9A7KAf+Od8ORLheHKrokFYWEW1zuiR45EjqWylLk835d3TQn/VfLOouRDhOPKLw wmxy5PjjvI+CHa9JY4TXY6iRTCc8By6fkwRWFZN5KApSC2NQriWiqgTSItFfYiLv yUthZjfRhbfSpf6E/0hq4axpfn+6W/MIWUg7Ag08IEU+GhDd+um8gdpBKsP1BAJF s34Fn3oJNoze0Wwcq5tZ91S1MsP+2vGFGIGC2HA7G2GAXjGFqBZUnIL+zjC1US3j XILAoy4Vx4J0Nn+f+zdGL2m5cm6O49ztaKqUxamVFigwM4va5OSOEpcnFMEPZ8HY 013dIg7tiayUTOTcByCpzfMDWuzHig== =jc6e -----END PGP SIGNATURE----- Merge tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The only real core work we've got this time around is the completion of the transition to the new host/target naming for the core APIs, Kconfig still needs doing but that's a lot less invasive. Otherwise the big changes are the new drivers that have been added: - Completion of the conversion to spi_alloc_host()/_target() and removal of the old naming. - Cleanups for Rockchip drivers, these brought in a new logging helper in the driver core for warnings during probe. - Support for configuration of the word delay via spidev_test. - Support for AMD HID2 controllers, Apple SPI controller and Realtek SPI-NAND controllers" * tag 'spi-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (58 commits) spi: imx: support word delay spi: imx: pass struct spi_transfer to prepare_transfer() spi: cs42l43: Add GPIO speaker id support to the bridge configuration spi: Delete useless checks spi: apple: Remove unnecessary .owner for apple_spi_driver spi: spidev_test: add support for word delay spi: apple: Add driver for Apple SPI controller spi: dt-bindings: apple,spi: Add binding for Apple SPI controllers spi: Use of_property_present() for non-boolean properties spi: zynqmp-gqspi: Undo runtime PM changes at driver exit time​ spi: spi-mem: rtl-snand: Correctly handle DMA transfers spi: tegra210-quad: Avoid shift-out-of-bounds spi: axi-spi-engine: Emit trace events for spi transfers dt-bindings: spi: sprd,sc9860-spi: convert to YAML spi: Replace deprecated PCI functions spi: dt-bindings: samsung: Add a compatible for samsung,exynos8895-spi spi: spi-mem: Add Realtek SPI-NAND controller dt-bindings: spi: Add realtek,rtl9301-snand spi: make class structs const spi: dt-bindings: brcm,bcm2835-aux-spi: Convert to dtschema ...	2024-11-20 12:23:06 -08:00
Linus Torvalds	4bd37a902a	regulator: Updates for v6.13 ... This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmc7O2AACgkQJNaLcl1U h9C3Zwf/ZfnNpSjd6hWtsPQROmOXNvVJDvXeyC6ZWQPjBU31VAFt+6rtk/xMVTIp cxaHG3PzeYkIk1VTm6yO5m3/kalIt4ECsJf62sfNNoltRcl0sJExt6ewKF6QjCN7 9OOAANJIWliApPj1ZQ+IIvddsF2Q0IqyioDLX+suGdNmNaZx4KnLP7dIAcluj3/d w+pC/CbrrUy2ScFgxLUm3dH16nV8hYm/F9f5Dsob9AV7IpMN0suMwbAd6uq2+KZT lLUw+kpkASetifhAfCjUGj8PIF+lMwW4WsuWgu4I0qiA9+FRDEyb6f0LQahs3d2G NO98rrcS9kVYaJ1z83KuMHeYBI44sQ== =AihX -----END PGP SIGNATURE----- Merge tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This was a quite quiet release for regulators on the drivers front, but we do have two small but useful core improvements: - Improve handling of cases where DT platforms specify both DT and init_data based configuration for a single regulator. - A helper of_regulator_get_optional() to simplify writing generic bindings for regulator consumers in subsystems. There's also some YAML conversions for the DT bindings which are a big part of the diffstat" * tag 'regulator-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies regulator: Switch back to struct platform_driver::remove() regulator: doc: remove documentation comment for regulator_init regulator: doc: add missing documentation for init_cb regulator: rk808: Restrict DVS GPIOs to the RK808 variant only regulator: rk808: Use dev_err_probe() in the probe path regulator: rk808: Perform trivial code cleanups regulator: dt-bindings: qcom,qca6390-pmu: add more properties for wcn6855 regulator: dt-bindings: lltc,ltc3676: convert to YAML regulator: core: Use fsleep() to get best sleep mechanism regulator: core: remove machine init callback from config regulator: core: add callback to perform runtime init regulator: core: do not silently ignore provided init_data regulator: max5970: Drop unused structs regulator: dt-bindings: vctrl-regulator: convert to YAML regulator: qcom-smd: make smd_vreg_rpm static regulator: Call of_node_put() only once in rzg2l_usb_vbus_regulator_probe() regulator: isl6271a: Drop explicit initialization of struct i2c_device_id::driver_data to 0 regulator: Add devres version of of_regulator_get_optional() regulator: Add of_regulator_get_optional() for pure DT regulator lookup	2024-11-20 12:18:50 -08:00
Linus Torvalds	bf9aa14fc5	A rather large update for timekeeping and timers: ... - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: * Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. * Queuing ignored timer signals onto a seperate ignored list. * Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. * Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure * Move all sleep and timeout functions into one file * Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. * Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. * Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place * Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: * Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. * Mostly boring cleanups, fixes, improvements and code movement -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7kPITHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoZKkD/9OUL6fOJrDUmOYBa4QVeMyfTef4EaL tvwIMM/29XQFeiq3xxCIn+EMnHjXn2lvIhYGQ7GKsbKYwvJ7ZBDpQb+UMhZ2nKI9 6D6BP6WomZohKeH2fZbJQAdqOi3KRYdvQdIsVZUexkqiaVPphRvOH9wOr45gHtZM EyMRSotPlQTDqcrbUejDMEO94GyjDCYXRsyATLxjmTzL/N4xD4NRIiotjM2vL/a9 8MuCgIhrKUEyYlFoOxxeokBsF3kk3/ez2jlG9b/N8VLH3SYIc2zgL58FBgWxlmgG bY71nVG3nUgEjxBd2dcXAVVqvb+5widk8p6O7xxOAQKTLMcJ4H0tQDkMnzBtUzvB DGAJDHAmAr0g+ja9O35Pkhunkh4HYFIbq0Il4d1HMKObhJV0JumcKuQVxrXycdm3 UZfq3seqHsZJQbPgCAhlFU0/2WWScocbee9bNebGT33KVwSp5FoVv89C/6Vjb+vV Gusc3thqrQuMAZW5zV8g4UcBAA/xH4PB0I+vHib+9XPZ4UQ7/6xKl2jE0kd5hX7n AAUeZvFNFqIsY+B6vz+Jx/yzyM7u5cuXq87pof5EHVFzv56lyTp4ToGcOGYRgKH5 JXeYV1OxGziSDrd5vbf9CzdWMzqMvTefXrHbWrjkjhNOe8E1A8O88RZ5uRKZhmSw hZZ4hdM9+3T7cg== =2VC6 -----END PGP SIGNATURE----- Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...	2024-11-19 16:35:06 -08:00
Linus Torvalds	5c2b050848	A set of updates for the interrupt subsystem: ... - Tree wide: * Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. - Core code: * Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. * Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. * Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. * Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. - Drivers: * New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips * Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. * Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. * Small cleanups and fixes all over the place -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmc7ggcTHHRnbHhAbGlu dXRyb25peC5kZQAKCRCmGPVMDXSYoaf7D/9G6FgJXx/60zqnpnOr9Yx0hxjaI47x PFyCd3P05qyVMBYXfI99vrSKuVdMZXJ/fH5L83y+sOaTASyLTzg37igZycIDJzLI FnHh/m/+UA8k2aIC5VUiNAjne2RLaTZiRN15uEHFVjByC5Y+YTlCNUE4BBhg5RfQ hKmskeffWdtui3ou13CSNvbFn+pmqi4g6n1ysUuLhiwM2E5b1rZMprcCOnun/cGP IdUQsODNWTTv9eqPJez985M6A1x2SCGNv7Z73h58B9N0pBRPEC1xnhUnCJ1sA0cJ pnfde2C1lztEjYbwDngy0wgq0P6LINjQ5Ma2YY2F2hTMsXGJxGPDZm24/u5uR46x N/gsOQMXqw6f5yvbiS7Asx9WzR6ry8rJl70QRgTyozz7xxJTaiNm2HqVFe2wc+et Q/BzaKdhmUJj1GMZmqD2rrgwYeDcb4wWYNtwjM4PVHHxYlJVq0mEF1kLLS8YDyjf HuGPVqtSkt3E0+Br3FKcv5ltUQP8clXbudc6L1u98YBfNK12hW8L+c3YSvIiFoYM ZOAeANPM7VtQbP2Jg2q81Dd3CShImt5jqL2um+l8g7+mUE7l9gyuO/w/a5dQ57+b kx7mHHIW2zCeHrkZZbRUYzI2BJfMCCOVN4Ax5OZxTLnLsL9VEehy8NM8QYT4TS8R XmTOYW3U9XR3gw== =JqxC -----END PGP SIGNATURE----- Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt subsystem updates from Thomas Gleixner: "Tree wide: - Make nr_irqs static to the core code and provide accessor functions to remove existing and prevent future aliasing problems with local variables or function arguments of the same name. Core code: - Prevent freeing an interrupt in the devres code which is not managed by devres in the first place. - Use seq_put_decimal_ull_width() for decimal values output in /proc/interrupts which increases performance significantly as it avoids parsing the format strings over and over. - Optimize raising the timer and hrtimer soft interrupts by using the 'set bit only' variants instead of the combined version which checks whether ksoftirqd should be woken up. The latter is a pointless exercise as both soft interrupts are raised in the context of the timer interrupt and therefore never wake up ksoftirqd. - Delegate timer/hrtimer soft interrupt processing to a dedicated thread on RT. Timer and hrtimer soft interrupts are always processed in ksoftirqd on RT enabled kernels. This can lead to high latencies when other soft interrupts are delegated to ksoftirqd as well. The separate thread allows to run them seperately under a RT scheduling policy to reduce the latency overhead. Drivers: - New drivers or extensions of existing drivers to support Renesas RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt chips - Support for multi-cluster GICs on MIPS. MIPS CPUs can come with multiple CPU clusters, where each CPU cluster has its own GIC (Generic Interrupt Controller). This requires to access the GIC of a remote cluster through a redirect register block. This is encapsulated into a set of helper functions to keep the complexity out of the actual code paths which handle the GIC details. - Support for encrypted guests in the ARM GICV3 ITS driver The ITS page needs to be shared with the hypervisor and therefore must be decrypted. - Small cleanups and fixes all over the place" * tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) irqchip/riscv-aplic: Prevent crash when MSI domain is missing genirq/proc: Use seq_put_decimal_ull_width() for decimal values softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT. timers: Use __raise_softirq_irqoff() to raise the softirq. hrtimer: Use __raise_softirq_irqoff() to raise the softirq riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers irqchip: Add T-HEAD C900 ACLINT SSWI driver dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK irqchip/mips-gic: Prevent indirect access to clusters without CPU cores irqchip/mips-gic: Multi-cluster support irqchip/mips-gic: Setup defaults in each cluster irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic() irqchip/mips-gic: Replace open coded online CPU iterations genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show() genirq/devres: Don't free interrupt which is not managed by devres irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool() irqchip/aspeed-intc: Add AST27XX INTC support dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC ...	2024-11-19 15:54:19 -08:00
Linus Torvalds	77286b868f	- Add support for Bluefield-2 SOCs to bluefield_edac ... - Add support for Intel Panther Lake-H to igen6_edac - Add polling support to igen6_edac as some Intel M100 chips have trouble with error interrupts - Add Kaby Lake-S support to ie31200_edac - Fix memory source detection in the SKX common module which is used by a couple of Intel EDAC drivers - Add support for the NXP i.MX9 memory controller to fsl_edac - The usual fixes and cleanups all over the place -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmc7KAcACgkQEsHwGGHe VUpzxQ/6Ahr49jXu58M69UQSW3DdzEU+5NNxmUrZdRrdW/oCJXGpuRdmdFWzvWTj HtfCS7GmaSIUPjLaNisyKdCaZxWysBqyLe0Vaexw5nuyybF5TzdYWETqFef1ij9z Wqq1j5LPrz+9BiqFqkpbgzo6Y6Ubsv2RKuZu+1GkMT2zRrgEJuJgHi6RlJ8vqj// 7FePl3CFQ3HDdTom0/L/gsMqSObj7HEq9cbalIjIYw/GRVkZol21vDwKrUkM7rpF tfrN1qq3NuJyqM7Du2jw2VtXDomrQ/ZkABNXCbtbczf8trLYUHR5QqIQjxy2ZFts jMKIbdCNAfgiqai6bpmm4QHWAIAV3L5DX7OuPmbpQeAzSmOqSEqNbnLbvA1e472f 5upQH4OLOsHgbnnFTQJ7vcU5jHf41DSauMCFp60h2hyn5RIiVY5ASxRfQ3xdh/+a hp2N+hB/y46AjXAidsGhAuUw8nt44MN2x1gtiUfbtMIx6gTewtuu0SbwOb85JW16 glhD8vxRGTUWoQit+Nh3u/P/rLSGkUJK87mfPr6O/95lleYy5hOizK2jGDbDWkA+ zOnNXnSWKK/WM+B9qnJnU1sCC7vT3j7cTaDXB1XS2MtcJbArkNC0FOd6xD81PoGh MhfWBAKpirXQEomFqpVziDa2wlaUnZrv7/4GGmaBRO401O9iaE4= =C3dY -----END PGP SIGNATURE----- Merge tag 'edac_updates_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Add support for Bluefield-2 SOCs to bluefield_edac - Add support for Intel Panther Lake-H to igen6_edac - Add polling support to igen6_edac as some Intel M100 chips have trouble with error interrupts - Add Kaby Lake-S support to ie31200_edac - Fix memory source detection in the SKX common module which is used by a couple of Intel EDAC drivers - Add support for the NXP i.MX9 memory controller to fsl_edac - The usual fixes and cleanups all over the place * tag 'edac_updates_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/igen6: Add polling support EDAC/igen6: Initialize edac_op_state according to the configuration data EDAC/igen6: Avoid segmentation fault on module unload EDAC/ie31200: Add Kaby Lake-S dual-core host bridge ID MAINTAINERS: Change FSL DDR EDAC maintainership EDAC/{skx_common,i10nm}: Fix incorrect far-memory error source indicator EDAC/skx_common: Differentiate memory error sources EDAC/fsl_ddr: Add support for i.MX9 DDR controller dt-bindings: memory: fsl: Add compatible string nxp,imx9-memory-controller EDAC/fsl_ddr: Fix bad bit shift operations EDAC/fsl_ddr: Move global variables into struct fsl_mc_pdata EDAC/fsl_ddr: Pass down fsl_mc_pdata in ddr_in32() and ddr_out32() RAS/AMD/ATL: Add debug prints for DF register reads EDAC/bluefield: Use Arm SMC for EMI access on BlueField-2 EDAC/bluefield: Fix potential integer overflow EDAC/igen6: Add Intel Panther Lake-H SoCs support	2024-11-19 12:00:10 -08:00
Linus Torvalds	2b5d5f23d4	hmon updates for v6.13-rc1 ... * New drivers - ISL28022 power monitor - Nuvoton NCT7363Y * Added support for new chips to existing drivers - The tmp180 driver now supports NXP p3t1085, including its I3C mode - The ina2xx driver now supports SY24655 and INA260 - The amc6821 driver now supports tsd,mule * Other notable improvements - The sht4x driver now supports the chip heater - The pmbus/isl68137 driver now supports a voltage divider on Vout - The cros_ec driver registers with the thermal framework - The pmbus/ltc2978 driver now supports LTC7841 - The PMBus core now allow drivers to override WRITE_PROTECT * Various other minor improvements and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmc6tlAACgkQyx8mb86f mYEmThAAi85J4hUepnrpfKwzqzTgXhU3Y1ih7qWyIK0ErI5tjmYiCR3PHHd7jNb0 A5STfbpRkomvepQq9H79lv5EiOMFvudYLj2QuxFbSchz0J2XqXtg2RxUi9AK0/SE b+KLRjNNNHc2J2tDrLj14ZJJxMbqx35kx2x6TDGI+zoBhQ0XwEWkbtNuXipSpHQ8 OkTjbtGKlQrjtc7fJ/fWGlTDeVS2LWtCbJhybcL47IkPeIBQH/FIhoEnnKqj9/EV KROuVAIoAYK9r+w7ZDfp2iBpR0gOaWZ5I2w2cCufsO9pFEuMIeVDgfFP2XGLBXEi NlVlMMyk6X7XqvnHYmun6r9chuPtFc9+Rr7SnJkVaNviY7BmRcuWk1BGxA4GIAIR 6F3sBxlXdisnjVkYd1ENhCGlso/fXQizKUro3KZka0sXEnjxA+SE0dzIK8d77kip P6Mjg3hC6DZlA0eIlnbCWasu0gra4duVTpGTOcbfZQHN+50Fi4va9w2+1UDfIPnn f2gIUubtzrWZqKAPnN6ckIE7BQubsPukx7Zef0wgDRpxOgCBrKeQVX8LYtXQfkda G+LkSk1N1bUIpTbzGQPg7YLbVCQPQYqaSryFPL2lQtfEY58Tgt+EMCKSROmXMBOV tk9uDaN8OjXdYmU90jcHJR7v1WDkLRkRV0fsh6eFUpc8gQDiY+k= =BG/M -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hmon updates from Guenter Roeck: "New drivers: - ISL28022 power monitor - Nuvoton NCT7363Y Added support for new chips to existing drivers: - The tmp180 driver now supports NXP p3t1085, including its I3C mode - The ina2xx driver now supports SY24655 and INA260 - The amc6821 driver now supports tsd,mule Other notable improvements: - The sht4x driver now supports the chip heater - The pmbus/isl68137 driver now supports a voltage divider on Vout - The cros_ec driver registers with the thermal framework - The pmbus/ltc2978 driver now supports LTC7841 - The PMBus core now allow drivers to override WRITE_PROTECT Various other minor improvements and cleanups" * tag 'hwmon-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (51 commits) hwmon: (pmbus/isl68137) add support for voltage divider on Vout dt-bindings: hwmon: isl68137: add bindings to support voltage dividers hwmon: tmp108: fix I3C dependency hwmon: (cros_ec) register thermal sensors to thermal framework hwmon: (tmp108) Add support for I3C device hwmon: (tmp108) Add helper function tmp108_common_probe() to prepare I3C support hwmon: (acpi_power_meter) Fix fail to load module on platform without _PMD method hwmon: (nct6775-core) Fix overflows seen when writing limit attributes hwmon: (pwm-fan) Introduce start from stopped state handling dt-bindings: hwmon: pwm-fan: Document start from stopped state properties hwmon: (tmp108) Add NXP p3t1085 support dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string hwmon: (sch5627, max31827) Fix typos in driver documentation hwmon: (jc42) Drop of_match_ptr() protection hwmon: (f71882fg) Fix grammar in fan speed trip points explanation dt-bindings: hwmon: pmbus: add ti tps25990 support hwmon: (pmbus/core) clear faults after setting smbalert mask hwmon: (pmbus/core) allow drivers to override WRITE_PROTECT hwmon: (pmbus) add documentation for existing flags hwmon: (ina226) Add support for SY24655 ...	2024-11-19 11:23:52 -08:00
Linus Torvalds	02b2f1a7b8	This update includes the following changes: ... API: - Add sig driver API. - Remove signing/verification from akcipher API. - Move crypto_simd_disabled_for_test to lib/crypto. - Add WARN_ON for return values from driver that indicates memory corruption. Algorithms: - Provide crc32-arch and crc32c-arch through Crypto API. - Optimise crc32c code size on x86. - Optimise crct10dif on arm/arm64. - Optimise p10-aes-gcm on powerpc. - Optimise aegis128 on x86. - Output full sample from test interface in jitter RNG. - Retry without padata when it fails in pcrypt. Drivers: - Add support for Airoha EN7581 TRNG. - Add support for STM32MP25x platforms in stm32. - Enable iproc-r200 RNG driver on BCMBCA. - Add Broadcom BCM74110 RNG driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmc6sQsACgkQxycdCkmx i6dfHxAAnkI65TE6agZq9DlkEU4ZqOsxxdk0MsGIhbCUTxW3KENzu9vtKjnvg9T/ Ou0d2J49ny87Y4zaA59Wf/Q1+gg5YSQR5kelonpfrPLkCkJjr72HZpyCHv8TTzEC uHHoVj9cnPIF5/yfiqQsrWT1ACip9vn+slyVPaMJV1qR6gnvnSALtsg4e/vKHkn7 ZMaf2pZ2ROYXdB02nMK5KQcCrxD64MQle/yQepY44eYjnT+XclkqPdi6o1nUSpj/ RFAeY0jFSTu0pj3DqT48TnU/LiiNLlFOZrGjCdEySoac63vmTtKqfYDmrRaFz4hB sucxbgJ3xnnYseRijtfXnxaD/IkDJln+ipGNQKAZLfOVMDCTxPdYGmOpobMTXMS+ 0sY0eAHgqr23P9pOp+sOzcAEFIqg6llAYQVWx3Zl4vpXBUuxzg6AqmHnPicnck7y Lw1cJhQxij2De3dG2ZL/0dgQxMjGN/YfCM8SSg6l+Xn3j4j47rqJNH2ZsmXtbJ2n kTkmemmWdgRR1IvgQQGsvyKs9ThkcEDW+IzW26SUv3Clvru2NSkX4ZPHbezZQf+D R0wMZsW3Fw7Zymerz1GIBSqdLnsyFWtIAjukDpOR6ordPgOBeDt76v6tw5vL2/II KYoeN1pdEEecwuhAsEvCryT5ZG4noBeNirf/ElWAfEybgcXiTks= =T8pa -----END PGP SIGNATURE----- Merge tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add sig driver API - Remove signing/verification from akcipher API - Move crypto_simd_disabled_for_test to lib/crypto - Add WARN_ON for return values from driver that indicates memory corruption Algorithms: - Provide crc32-arch and crc32c-arch through Crypto API - Optimise crc32c code size on x86 - Optimise crct10dif on arm/arm64 - Optimise p10-aes-gcm on powerpc - Optimise aegis128 on x86 - Output full sample from test interface in jitter RNG - Retry without padata when it fails in pcrypt Drivers: - Add support for Airoha EN7581 TRNG - Add support for STM32MP25x platforms in stm32 - Enable iproc-r200 RNG driver on BCMBCA - Add Broadcom BCM74110 RNG driver" * tag 'v6.13-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits) crypto: marvell/cesa - fix uninit value for struct mv_cesa_op_ctx crypto: cavium - Fix an error handling path in cpt_ucode_load_fw() crypto: aesni - Move back to module_init crypto: lib/mpi - Export mpi_set_bit crypto: aes-gcm-p10 - Use the correct bit to test for P10 hwrng: amd - remove reference to removed PPC_MAPLE config crypto: arm/crct10dif - Implement plain NEON variant crypto: arm/crct10dif - Macroify PMULL asm code crypto: arm/crct10dif - Use existing mov_l macro instead of __adrl crypto: arm64/crct10dif - Remove remaining 64x64 PMULL fallback code crypto: arm64/crct10dif - Use faster 16x64 bit polynomial multiply crypto: arm64/crct10dif - Remove obsolete chunking logic crypto: bcm - add error check in the ahash_hmac_init function crypto: caam - add error check to caam_rsa_set_priv_key_form hwrng: bcm74110 - Add Broadcom BCM74110 RNG driver dt-bindings: rng: add binding for BCM74110 RNG padata: Clean up in padata_do_multithreaded() crypto: inside-secure - Fix the return value of safexcel_xcbcmac_cra_init() crypto: qat - Fix missing destroy_workqueue in adf_init_aer() crypto: rsassa-pkcs1 - Reinstate support for legacy protocols ...	2024-11-19 10:28:41 -08:00
Linus Torvalds	ba1f9c8fe3	arm64 updates for 6.13: ... * Support for running Linux in a protected VM under the Arm Confidential Compute Architecture (CCA) * Guarded Control Stack user-space support. Current patches follow the x86 ABI of implicitly creating a shadow stack on clone(). Subsequent patches (already on the list) will add support for clone3() allowing finer-grained control of the shadow stack size and placement from libc * AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are getting close with the upcoming dpISA support) * Other arch features: - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only exposed to user; uaccess support not merged yet) - MTE: hugetlbfs support and the corresponding kselftests - Optimise CRC32 using the PMULL instructions - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG - Optimise the kernel TLB flushing to use the range operations - POE/pkey (permission overlays): further cleanups after bringing the signal handler in line with the x86 behaviour for 6.12 * arm64 perf updates: - Support for the NXP i.MX91 PMU in the existing IMX driver - Support for Ampere SoCs in the Designware PCIe PMU driver - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC - Support for Samsung's 'Mongoose' CPU PMU - Support for PMUv3.9 finer-grained userspace counter access control - Switch back to platform_driver::remove() now that it returns 'void' - Add some missing events for the CXL PMU driver * Miscellaneous arm64 fixes/cleanups: - Page table accessors cleanup: type updates, drop unused macros, reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity check addresses before runtime P4D/PUD folding - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the FEAT_ECV for the generic timers) allowing Linux to boot with firmware deployments that don't set SCTLR_EL3.ECVEn - ACPI/arm64: tighten the check for the array of platform timer structures and adjust the error handling procedure in gtdt_parse_timer_block() - Optimise the cache flush for the uprobes xol slot (skip if no change) and other uprobes/kprobes cleanups - Fix the context switching of tpidrro_el0 when kpti is enabled - Dynamic shadow call stack fixes - Sysreg updates - Various arm64 kselftest improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmc5POIACgkQa9axLQDI XvEDYA//a3eeNkgMuGdnSCVcLz+zy+oNwAwboG/4X1DqL8jiCbI4npwugPx95RIA YZOUvo9T2aL3OyefpUHll4gFHqx9OwoZIig2F70TEUmlPsGUbh0KBkdfQF3xZPdl EwV0kHSGEqMWMBwsGJGwgCYrUaf1MUQzh1GBl7VJ2ts5XsJBaBeOyKkysij26wtZ V+aHq2IUx7qQS7+HC/4P6IoHxKziFcsCMovaKaynP4cw9xXBQbDMcNlHEwndOMyk pu2zrv7GG0j3KQuVP/2Alf5FKhmI0GVGP/6Nc/zsOmw96w8Kf7HfzEtkHawr2aRq rqg/c9ivzDn1p+fUBo4ZYtrRk4IAY+yKu6hdzdLTP5+bQrBTWTO9rjQVBm9FAGYT sCdEj1NqzvExvNHD7X6ut/GJ05lmce3K+qeSXSEysN9gqiT3eomYWMXrD2V2lxzb rIDDcb/icfaqjt14Mksh19r/rzNeq7noj9CGSmcqw0BHZfHzl38Lai6pdfYzCNyn vCM/c4c1D/WWX8/lifO1JZVbhDk1jy82Iphg2KEhL8iKPxDsKBBZLmYuU1oa7tMo WryGAz9+GQwd+W9chFuaOEtMnzvW2scEJ5Eb2fEf0Qj0aEurkL+C9dZR6o1GN77V DBUxtU628Ef4PJJGfbNCwZzdd8UPYG3a/mKfQQ3dz0oz2LySlW4= =wDot -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for running Linux in a protected VM under the Arm Confidential Compute Architecture (CCA) - Guarded Control Stack user-space support. Current patches follow the x86 ABI of implicitly creating a shadow stack on clone(). Subsequent patches (already on the list) will add support for clone3() allowing finer-grained control of the shadow stack size and placement from libc - AT_HWCAP3 support (not running out of HWCAP2 bits yet but we are getting close with the upcoming dpISA support) - Other arch features: - In-kernel use of the memcpy instructions, FEAT_MOPS (previously only exposed to user; uaccess support not merged yet) - MTE: hugetlbfs support and the corresponding kselftests - Optimise CRC32 using the PMULL instructions - Support for FEAT_HAFT enabling ARCH_HAS_NONLEAF_PMD_YOUNG - Optimise the kernel TLB flushing to use the range operations - POE/pkey (permission overlays): further cleanups after bringing the signal handler in line with the x86 behaviour for 6.12 - arm64 perf updates: - Support for the NXP i.MX91 PMU in the existing IMX driver - Support for Ampere SoCs in the Designware PCIe PMU driver - Support for Marvell's 'PEM' PCIe PMU present in the 'Odyssey' SoC - Support for Samsung's 'Mongoose' CPU PMU - Support for PMUv3.9 finer-grained userspace counter access control - Switch back to platform_driver::remove() now that it returns 'void' - Add some missing events for the CXL PMU driver - Miscellaneous arm64 fixes/cleanups: - Page table accessors cleanup: type updates, drop unused macros, reorganise arch_make_huge_pte() and clean up pte_mkcont(), sanity check addresses before runtime P4D/PUD folding - Command line override for ID_AA64MMFR0_EL1.ECV (advertising the FEAT_ECV for the generic timers) allowing Linux to boot with firmware deployments that don't set SCTLR_EL3.ECVEn - ACPI/arm64: tighten the check for the array of platform timer structures and adjust the error handling procedure in gtdt_parse_timer_block() - Optimise the cache flush for the uprobes xol slot (skip if no change) and other uprobes/kprobes cleanups - Fix the context switching of tpidrro_el0 when kpti is enabled - Dynamic shadow call stack fixes - Sysreg updates - Various arm64 kselftest improvements * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (168 commits) arm64: tls: Fix context-switching of tpidrro_el0 when kpti is enabled kselftest/arm64: Try harder to generate different keys during PAC tests kselftest/arm64: Don't leak pipe fds in pac.exec_sign_all() arm64/ptrace: Clarify documentation of VL configuration via ptrace kselftest/arm64: Corrupt P0 in the irritator when testing SSVE acpi/arm64: remove unnecessary cast arm64/mm: Change protval as 'pteval_t' in map_range() kselftest/arm64: Fix missing printf() argument in gcs/gcs-stress.c kselftest/arm64: Add FPMR coverage to fp-ptrace kselftest/arm64: Expand the set of ZA writes fp-ptrace does kselftets/arm64: Use flag bits for features in fp-ptrace assembler code kselftest/arm64: Enable build of PAC tests with LLVM=1 kselftest/arm64: Check that SVCR is 0 in signal handlers selftests/mm: Fix unused function warning for aarch64_write_signal_pkey() kselftest/arm64: Fix printf() compiler warnings in the arm64 syscall-abi.c tests kselftest/arm64: Fix printf() warning in the arm64 MTE prctl() test kselftest/arm64: Fix printf() compiler warnings in the arm64 fp tests kselftest/arm64: Fix build with stricter assemblers arm64/scs: Drop unused prototype __pi_scs_patch_vmlinux() arm64/scs: Deal with 64-bit relative offsets in FDE frames ...	2024-11-18 18:10:37 -08:00
Linus Torvalds	77a0cfafa9	for-6.13/block-20241118 ... -----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmc7S40QHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpjHVD/43rDZ8ehs+IAAr6S0RemNX1SRG0mK2UOEb kMoNogS7StO/c4JYW3JuzCyLRn5ZsgeWV/muqxwDEWQrmTGrvi+V45KikrZPwm3k p0ump33qV9EU2jiR1MKZjtwK2P0CI7/DD3W8ww6IOvKbTT7RcqQcdHznvXArFBtc xCuQPpayFG7ZasC+N9VaBwtiUEVgU3Ek9AFT7UVZRWajjHPNalQwaooJWayO0rEG KdoW5yG0ryLrgCY2ACSvRLS+2s14EJtb8hgT08WKHTNgd5LxhSKxfsTapamua+7U FdVS6Ij0tEkgu2jpvgj7QKO0Uw10Cnep2gj7RHts/LVewvkliS6XcheOzqRS1jWU I2EI+UaGOZ11OUiw52VIveEVS5zV/NWhgy5BSP9LYEvXw0BUAHRDYGMem8o5G1V1 SWqjIM1UWvcQDlAnMF9FDVzojvjVUmYWvcAlFFztO8J0B7SavHR3NcfHwEf57reH rNoUbi/9c4/wjJJF33gejiR5pU+ewy/Mk75GrtX3xpEqlztfRbf9/FbPCMEAO1KR DF/b3lkUV9i2/BRW6a0SpZ5RDSmSYMnateel6TrPyVSRnpiSSFO8FrbynwUOa17b 6i49YDFWzzXOrR1YWDg6IEtTrcmBEmvi7F6aoDs020qUnL0hwLn1ZuoIxuiFEpor Z0iFF1B/nw== =PWTH -----END PGP SIGNATURE----- Merge tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - NVMe updates via Keith: - Use uring_cmd helper (Pavel) - Host Memory Buffer allocation enhancements (Christoph) - Target persistent reservation support (Guixin) - Persistent reservation tracing (Guixen) - NVMe 2.1 specification support (Keith) - Rotational Meta Support (Matias, Wang, Keith) - Volatile cache detection enhancment (Guixen) - MD updates via Song: - Maintainers update - raid5 sync IO fix - Enhance handling of faulty and blocked devices - raid5-ppl atomic improvement - md-bitmap fix - Support for manually defining embedded partition tables - Zone append fixes and cleanups - Stop sending the queued requests in the plug list to the driver ->queue_rqs() handle in reverse order. - Zoned write plug cleanups - Cleanups disk stats tracking and add support for disk stats for passthrough IO - Add preparatory support for file system atomic writes - Add lockdep support for queue freezing. Already found a bunch of issues, and some fixes for that are in here. More will be coming. - Fix race between queue stopping/quiescing and IO queueing - ublk recovery improvements - Fix ublk mmap for 64k pages - Various fixes and cleanups * tag 'for-6.13/block-20241118' of git://git.kernel.dk/linux: (118 commits) MAINTAINERS: Update git tree for mdraid subsystem block: make struct rq_list available for !CONFIG_BLOCK block/genhd: use seq_put_decimal_ull for diskstats decimal values block: don't reorder requests in blk_mq_add_to_batch block: don't reorder requests in blk_add_rq_to_plug block: add a rq_list type block: remove rq_list_move virtio_blk: reverse request order in virtio_queue_rqs nvme-pci: reverse request order in nvme_queue_rqs btrfs: validate queue limits block: export blk_validate_limits nvmet: add tracing of reservation commands nvme: parse reservation commands's action and rtype to string nvmet: report ns's vwc not present md/raid5: Increase r5conf.cache_name size block: remove the ioprio field from struct request block: remove the write_hint field from struct request nvme: check ns's volatile write cache not present nvme: add rotational support nvme: use command set independent id ns if available ...	2024-11-18 16:50:08 -08:00
Linus Torvalds	3d1b536c13	ata changes for 6.13 ... - Fix typos in comments (Yan Zhen) - Remove unused macro definitions (Damien Le Moal) - Switch back to the .remove() callback (Uwe Kleine-König) - Make use of the get_unaligned_be24() helper instead of open coding (Andy Shevchenko) - Refactor and cleanup ata_scsi_simulate() command emulation, such that all commands use ata_scsi_rbuf_fill() with its own callback (Damien Le Moal) - Improve ata_scsi_simulate() command emulation by accurately setting the SCSI command residual (number of bytes not filled) in the command reply (Damien Le Moal) - Add missing iommus property in ahci-platform device tree binding (Frank Wunderlich) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZzthbQAKCRDJZDGjmcZN cvgtAQDDzKLg9UQhJou7nAjrdyJi7gZBy5o0Q0KIjMOqgnmz8wEA6HC+EWOjH3Fq 3f1nwxXGKR7T+bVUZpYfB+YTB8ly+g0= =0XKN -----END PGP SIGNATURE----- Merge tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Niklas Cassel: - Fix typos in comments (Yan Zhen) - Remove unused macro definitions (Damien Le Moal) - Switch back to the .remove() callback (Uwe Kleine-König) - Make use of the get_unaligned_be24() helper instead of open coding (Andy Shevchenko) - Refactor and cleanup ata_scsi_simulate() command emulation, such that all commands use ata_scsi_rbuf_fill() with its own callback (Damien Le Moal) - Improve ata_scsi_simulate() command emulation by accurately setting the SCSI command residual (number of bytes not filled) in the command reply (Damien Le Moal) - Add missing iommus property in ahci-platform device tree binding (Frank Wunderlich) * tag 'ata-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: ahci-platform: add missing iommus property ata: libata-scsi: Return residual for emulated SCSI commands ata: libata-scsi: Remove struct ata_scsi_args ata: libata-scsi: Document all VPD page inquiry actors ata: libata-scsi: Refactor ata_scsiop_maint_in() ata: libata-scsi: Refactor ata_scsiop_read_cap() ata: libata-scsi: Refactor ata_scsi_simulate() ata: libata-scsi: Refactor scsi_6_lba_len() with use of get_unaligned_be24() ata: Switch back to struct platform_driver::remove() ata: libata: Remove unused macro definitions ata: Fix typos in the comment	2024-11-18 16:45:28 -08:00
Rob Herring (Arm)	5bf99baefb	dt-bindings: net: renesas,ether: Drop undocumented "micrel,led-mode" ... "micrel,led-mode" is not yet documented by a schema. It's irrelevant to the example, so just drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225742.1784723-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-18 16:17:41 -08:00
Jiri Kosina	390b059ac7	Merge branch 'for-6.13/goodix' into for-linus ... - Support for Goodix GT7986U SPI (Charles Wang) - assorted code cleanups and fixes (Charles Wang)	2024-11-18 21:57:27 +01:00
Rob Herring (Arm)	6bbdb903db	dt-bindings: net: dsa: microchip,ksz: Drop undocumented "id" ... "id" is not a documented property, so drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225642.1783485-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-15 14:29:28 -08:00
Jakub Kicinski	6cd663f03f	bluetooth-next pull request for net-next: ... - btusb: add Foxconn 0xe0fc for Qualcomm WCN785x - btmtk: Fix ISO interface handling - Add quirk for ATS2851 - btusb: Add RTL8852BE device 0489:e123 - ISO: Do not emit LE PA/BIG Create Sync if previous is pending - btusb: Add USB HW IDs for MT7920/MT7925 - btintel_pcie: Add handshake between driver and firmware - btintel_pcie: Add recovery mechanism - hci_conn: Use disable_delayed_work_sync - SCO: Use kref to track lifetime of sco_conn - ISO: Use kref to track lifetime of iso_conn - btnxpuart: Add GPIO support to power save feature - btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x -----BEGIN PGP SIGNATURE----- iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmc2bBcZHGx1aXoudm9u LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKfnGEACV1YylQ9kJxzyDwyxrZtYG 3T2I+8qQwIpokyGcYHpMC0kJFAzCbywGxjS3njpOrM0nTuvGpvLAD40Sn+pMHbKb 3XzNNSixuxgJvr3CyDM0KOua/2nFQZyPe0DXe4D9bzOproIHDyoQkWbVqntLCyXO DDwwSF/CcgfZsIf5dfGir6erUBOXzYUUlCL7Q0ap2DNdeYAv6XLWwVSMu7okIFpH H/vBcWMWXwNNyEtDIHPmRYut14qEFASTRWsSe7IiIoL2V5VG5BVUALk8rAmoVv10 IjE5kAmdLBHplhtnDIEg55CHIivlnbOp9d7WMhKkwY+vrPx571uFuwXeCBrg+5cd SyekP701TtS5oscT2SazimZTdtS0YLmJgVlhxX8DAIeElO9pEPdJt9CNCafFKmEY LMleGXDrH4bnTA1k6nMX2Ky4/oqlSonPbYXZ4GzL5ZMRg9biIkRI3YyRvKLM1plh MoO14zXhS184Cf0vSaGSeZ2nqsv7Z0lPkGJxCpGyzkOoA1VnzORl9teik5C6eeCw 7wOoM+x+aJU8hxyD65DkyPNzLkvrEohRJWx7XMOKZEC1uFvBrJfEc/lb7TH5E+Zd PbPG1+x5Y3CAwvOcQzbpVeF0ujL0+KvJF+Y1q7eJ3mB+KoDPBEVbcO1ypvL6kbfW ETYrD/fuBiuxQE/XM0Xdlw== =niGG -----END PGP SIGNATURE----- Merge tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - btusb: add Foxconn 0xe0fc for Qualcomm WCN785x - btmtk: Fix ISO interface handling - Add quirk for ATS2851 - btusb: Add RTL8852BE device 0489:e123 - ISO: Do not emit LE PA/BIG Create Sync if previous is pending - btusb: Add USB HW IDs for MT7920/MT7925 - btintel_pcie: Add handshake between driver and firmware - btintel_pcie: Add recovery mechanism - hci_conn: Use disable_delayed_work_sync - SCO: Use kref to track lifetime of sco_conn - ISO: Use kref to track lifetime of iso_conn - btnxpuart: Add GPIO support to power save feature - btusb: Add 0x0489:0xe0f3 and 0x13d3:0x3623 for Qualcomm WCN785x * tag 'for-net-next-2024-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (51 commits) Bluetooth: MGMT: Add initial implementation of MGMT_OP_HCI_CMD_SYNC Bluetooth: fix use-after-free in device_for_each_child() Bluetooth: btintel: Direct exception event to bluetooth stack Bluetooth: hci_core: Fix calling mgmt_device_connected Bluetooth: hci_bcm: Use the devm_clk_get_optional() helper Bluetooth: ISO: Send BIG Create Sync via hci_sync Bluetooth: hci_conn: Remove alloc from critical section Bluetooth: ISO: Use kref to track lifetime of iso_conn Bluetooth: SCO: Use kref to track lifetime of sco_conn Bluetooth: HCI: Add IPC(11) bus type Bluetooth: btusb: Add 3 HWIDs for MT7925 Bluetooth: btusb: Add new VID/PID 0489/e124 for MT7925 Bluetooth: ISO: Update hci_conn_hash_lookup_big for Broadcast slave Bluetooth: ISO: Do not emit LE BIG Create Sync if previous is pending Bluetooth: ISO: Fix matching parent socket for BIS slave Bluetooth: ISO: Do not emit LE PA Create Sync if previous is pending Bluetooth: btrtl: Decrease HCI_OP_RESET timeout from 10 s to 2 s Bluetooth: btbcm: fix missing of_node_put() in btbcm_get_board_name() Bluetooth: btusb: Add new VID/PID 0489/e111 for MT7925 Bluetooth: btmtk: adjust the position to init iso data anchor ... ==================== Link: https://patch.msgid.link/20241114214731.1994446-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-15 14:16:28 -08:00
Rob Herring (Arm)	28b513b5a6	Merge branch 'dt/linus' into dt/next ... Pull-in kunit kconfig fix	2024-11-15 14:03:59 -06:00
Rob Herring (Arm)	b52a8deea5	dt-bindings: net: sff,sfp: Fix "interrupts" property typo ... The example has "interrupt" property which is not a defined property. It should be "interrupts" instead. "interrupts" also should not contain a phandle. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225825.1785588-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-14 19:31:35 -08:00
Rob Herring (Arm)	ac0928d5b6	dt-bindings: net: mdio-mux-gpio: Drop undocumented "marvell,reg-init" ... "marvell,reg-init" is not yet documented by schema. It's irrelevant to the example, so just drop it. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20241113225713.1784118-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-14 19:30:16 -08:00
Neeraj Sanjay Kale	6db0cd5543	dt-bindings: net: bluetooth: nxp: Add support for power save feature using GPIO ... This adds a new optional device tree property device-wakeup-gpios, which specifies the GPIO connected to BT_WAKE_IN pin of the NXP chipset. If this property is defined, the driver will use this GPIO for driving chip into sleep/wakeup state, else use the UART break signal by default. Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>	2024-11-14 15:29:20 -05:00
Tristram Ha	3a371e1052	dt-bindings: net: dsa: microchip: Add LAN9646 switch support ... LAN9646 switch is a 6-port switch with functions like KSZ9897. It has 4 internal PHYs and 1 SGMII port. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20241109015705.82685-2-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-13 19:54:58 -08:00
Jakub Kicinski	5c46638540	wireless-next patches for v6.13 ... Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip -----BEGIN PGP SIGNATURE----- iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF 68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ== =v8bS -----END PGP SIGNATURE----- Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.13 Most likely the last -next pull request for v6.13. Most changes are in Realtek and Qualcomm drivers, otherwise not really anything noteworthy. Major changes: mac80211 * EHT 1024 aggregation size for transmissions ath12k * switch to using wiphy_lock() and remove ar->conf_mutex * firmware coredump collection support * add debugfs support for a multitude of statistics ath11k * dt: document WCN6855 hardware inputs ath9k * remove include/linux/ath9k_platform.h ath5k * Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support rtw88: * 8821au and 8812au USB adapters support rtw89 * thermal protection * firmware secure boot for WiFi 6 chip * tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits) Revert "wifi: iwlegacy: do not skip frames with bad FCS" wifi: mac80211: pass MBSSID config by reference wifi: mac80211: Support EHT 1024 aggregation size in TX net: rfkill: gpio: Add check for clk_enable() wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() wifi: Switch back to struct platform_driver::remove() wifi: ipw2x00: libipw_rx_any(): fix bad alignment wifi: brcmfmac: release 'root' node in all execution paths wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA wifi: iwlwifi: bump minimum API version in BZ/SC to 92 wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h wifi: iwlwifi: be less noisy if the NIC is dead in S3 wifi: iwlwifi: mvm: tell iwlmei when we finished suspending wifi: iwlwifi: allow fast resume on ax200 wifi: iwlwifi: mvm: support new initiator and responder command version wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency wifi: iwlwifi: mvm: MLO scan upon channel condition degradation wifi: iwlwifi: mvm: support new versions of the wowlan APIs wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif() ... ==================== Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>	2024-11-13 18:35:19 -08:00
Arnd Bergmann	a1cc63408f	Microchip AT91 SoC updates for v6.13 ... It contains: - DT bindings update for the SAM9X7 TCB block -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZynOpAAKCRCejrg/N2X7 /TotAP9R6gwNMDp0Y0bilhMIdP3kFRlAuKTUzC/H0snPY/SRCgEAgTwDAq/kEysH WOQVyUmGwvINV6ki0wZU1V8W5x0VqQ4= =Cp0L -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc1OEUACgkQYKtH/8kJ UidpFQ//c+NnRzOGVs8seZfBnL++iY5G/aLP7OXGNmRUH5SV7G08HzTzNzZAnUbs rY3RtAp2/f+ucG31K1wyFV7sDLKqvQN141GE28fVRt7Xl4rgyxgZQd3MxR7Xo2fp XW2q4/aw+dtxyjkbA3Qft75K6Ftffe8d24ZxiggmyAZoQgRnad+SnYYmxWE8YqHe pOPIWz1QVVC0Y0xnC8ALca+bKni3H5yHDoIoIi9820bixLlw0N6AZkjObvmLDu1j i2tVTg5gYTUzCWUScJJr2IGsrvxEXZhWtPwNv26e8E33aLTfLerpOhW6RG/JA4LQ YGsJFnN74FFREq2GuMjZjiTYIiT/BV2tbxV6LoaAfw8fM3Vrx/SiBjtFsviOgzMB 2WPufyhMPVQQLujQgrbNFXOVJqF/d4Rv6zE3cmQ1QTqreXCQ7k2UZqIuwRxTy/Yl bb8YKczWPF3QFCx9fuD8kS4QKMuSY3Mntj8euB4g1Rdo9x1/Z/pC2jHPfPvsPaLO Qf90O6t4zpH1sSKTuhQq/s8sAZNYI9QqnL+zytxJga72TvxpcjvcrQGreg6I50lu fqMDFzLDycrzUsYiQrDsEoBIghRjxZpJ5yS++8LBoXsUzghvgUTQy0J03PmvxME7 OHdYSLjio4IRxwlOT3BAKrShATJt02BnyZOS9Zezq6VNplSk9v4= =QuEo -----END PGP SIGNATURE----- Merge tag 'at91-soc-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 SoC updates for v6.13 It contains: - DT bindings update for the SAM9X7 TCB block * tag 'at91-soc-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible Link: https://lore.kernel.org/r/20241113182050.2176500-3-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-14 00:37:41 +01:00
Arnd Bergmann	2b7fda346e	Microchip AT91 device tree updates for v6.13 ... It contains: - device tree support for the Microchip SAM9X7 SoC and the Microchip SAM9X75 Curiosity board - enable power monitor support for SAM9X60-EK, SAMA5D2-ICP, SAMA7G45 Curiosity, SAMA7G5-EK boards - updates the uart nodes with missing properties - device tree cleanups -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCZyuq2wAKCRCejrg/N2X7 /SuVAP9pziV3tFoypFQoVttvsJarlXhPh8d5bK6zB/Q/gBQeuAD/aWPbfFBvSOl4 H6FWMj+ap1iLbNy8dIYqDX/NkwH43w0= =PiDc -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc1N90ACgkQYKtH/8kJ UieRJQ//bEZBz+12tW2DHuxIWGIdjorHls9PcAuAekgSEgMsrBXMt9F4QZnLIjP8 8GeKr4drahWGfyXv3hvqwr39QhCFuFq6d/hlW23mmOcj3SFxhIvLdknLzRL3yMvk WhcUywBnDRnvuntWKOOmqhp2C/stWvsp1Jtrsq2R1Y3+wjH2HyGXwU6S7XkSlXX9 4Am9sqkYl0r365los8zjnk1fTV29wxHN2tMN00T2wVACtxo+pU1IsfurA7eu0ahQ Q/a+jIZyTk4cO6HtcPzH9ZhdlBSmJQPaEskz59Lp03kyiE+iENBE2l3CxTXielQe nhJsHz33R/jNJJMrTACqAyT2awjfLcnW9+vCvjEFhrhnmSmAQKVJTyQMOrZyhyHo o3Mgtq5ZhzZHGWeBChraVCIlMswbJp1uBUP9KFMzgroYEo0zOYOTwjN7QzPG/6mj DjAHpAw9ZKKa4gc35h4r9/iT/XUZ09TRnilHiNlrPGc/UTXivNYlvn5xsXMhaTQy JE9APKKfOfZ/GxL7avzfgWvfpypWgQC/ZvfJ796YyOKtYt3Al7VzDv2IdZGSg4N6 2OkYA/EHHvsKHjokg3tTzOXPtSREcpiberkl7mf8m7oJgZb8a28r0XqU2gm/WX1C 9E4RaPMkPVmNs3V4ACh+sHUNwtXHO0zUYqbpTvvgmULNvfnNpPU= =Gfl0 -----END PGP SIGNATURE----- Merge tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.13 It contains: - device tree support for the Microchip SAM9X7 SoC and the Microchip SAM9X75 Curiosity board - enable power monitor support for SAM9X60-EK, SAMA5D2-ICP, SAMA7G45 Curiosity, SAMA7G5-EK boards - updates the uart nodes with missing properties - device tree cleanups * tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board dt-bindings: arm: add sam9x75 curiosity board ARM: dts: at91: sam9x7: add device tree for SoC ARM: dts: microchip: Rename LED sub nodes name ARM: dts: microchip: Rename the pmic node ARM: dts: microchip: Rename the eeprom nodename ARM: dts: microchip: sama7g5ek: Add power monitor support ARM: dts: microchip: sama7g54_curiosity: Add power monitor support ARM: dts: microchip: sama5d2_icp: Add power monitor support ARM: dts: microchip: sam9x60ek: Add power monitor support ARM: dts: microchip: Unify rng node names ARM: dts: microchip: Add trng labels for all at91 SoCs ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode Link: https://lore.kernel.org/r/20241113182050.2176500-2-claudiu.beznea@tuxon.dev Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-14 00:35:57 +01:00
Grant Peltier	71d689f60b	dt-bindings: hwmon: isl68137: add bindings to support voltage dividers ... Add devicetree bindings to support declaring optional voltage dividers to the rail outputs of supported digital multiphase regulators. Some applications require Vout to exceed the voltage range that the Vsense pin can detect. This binding definition allows users to define the characteristics of a voltage divider placed between Vout and the Vsense pin for any rail powered by the device. These bindings copy the vout-voltage-divider property defined in the maxim,max20730 bindings schema since it is the best fit for the use case of scaling hwmon PMBus telemetry. The generic voltage-divider property used by many iio drivers was determined to be a poor fit because that schema is tied directly to iio for the purpose of scaling io-channel voltages and the isl68137 driver is not an iio driver. New schema file named isil,isl68137.yaml to align with the corresponding driver name and pre-existing bindings ported from trivial bindings. However, all new device bindings use renesas as the vendor prefix since Renesas acquired Intersil and now maintains all documentation for the devices. Signed-off-by: Grant Peltier <grantpeltier93@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Message-ID: <f7ac200e982961ff733de27a5c4505c04d68b6f3.1731439797.git.grantpeltier93@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2024-11-13 12:07:39 -08:00
Arnd Bergmann	bc329f394b	Compatibles for some additional "General Register Files" syscons ... -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmchJPYQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgVAVB/47Lw5WbsMdz2cHDRgUA0Bo4Ss6B89N4uzN bKLYvX4MZ/FBuwp+neE9YgX5nuSeJJf83W708pogyVN/J6T7JLejW4rJs1QnTCjJ zF4Fv+rTGJAg3YFeL21M6Y0s6UArw+i9vstB3q0/z1QgDHc70gGxcZ+w6eqUPU+x 0LfSs2DdhEo6OdLSegftfXzioWLnzgdggnIbmULScS/bvcteRpBVHKOSsW3bwWWq lBv2bF08VJ7NBC/AkRKTOHDLFa7A438LvekqwD7ZY62zkj7UmMEJihwVsyxWz32G 9wFWnKOt4vyRVLqMTkybg+2C2eAeaBxEQ7XKmkNPzsUrQ/W05ddw =wyPY -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc05JMACgkQYKtH/8kJ Uif4FBAAmqn49DOx/JH4Xc3uN7Y0pvvMVqfkIim2q8LN1EtQYvHmjnu4sno7ZWYX PL+RUXPBhh0374dTPkyqPtPK29DvzaM4BCjDCS7UnhrFXfSTttJLy7dcI+IHVxtd J8xjHGxUIaMMbxegO5IOpzfzGACkPdQJDmRHZrGOsaGC9EibwDsOstA/JARYVSNR 1aUfn45ubL9d8zgoY9gG3ekiZ2zGKMq6SPg7FMOPahzOGx+EkPK3U9YkJ8DnF5Sb 14mbFwzGED7TOSpfI3hKqWM7lzyzrVOU98BY0GDolaEU2MJ5QpATEEJvqF7nzePB uBUAzS2ivPsa1aMREyiACWd86dSOuoRRhWOmMy+o+GVIPlfJ8XD3DqMCX92CRTMB 5EwIuW+TyoO0qR4ernIZvVBbWV37V2nLtB6k0FeJZlxWBqxOZGcRg34TTXhx3Jx1 ztar7bSx2gqg0I4phFOmwXp53ox9JbAzIpRYg27CQwRdBSMvC4AyM0sD3tw0ygL3 DM/z3Xcg160hQnDVyNkQ09tYKbx7EC00QxbgVITAjRl1d71nitJT0K0UAmdq59b8 kbZjM8OgO0rIs0cEo6VeAAoxcxHQb8xrJa3Ba1cW1GaILZvQ1XrG5itAnDJpP1eQ r77pzKUxv9TV10g0ECC8+wxOHsQpfoDhG1SrgLGd/vMXZpHMIWQ= =zs+Y -----END PGP SIGNATURE----- Merge tag 'v6.13-armsoc/drivers1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Compatibles for some additional "General Register Files" syscons * tag 'v6.13-armsoc/drivers1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: dt-bindings: soc: rockchip: add rk3588 mipi dcphy syscon dt-bindings: soc: rockchip: add rk3576 usb2phy syscon dt-bindings: soc: rockchip: add rk3576 vo1-grf syscon Link: https://lore.kernel.org/r/4605658.LvFx2qVVIh@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-13 18:40:35 +01:00
Arnd Bergmann	1876c788bb	A few more Qualcomm driver updates for v6.13 ... Make the Adreno driver invoke the SMMU aperture setup firmware function, which is required to allow the GPU to manage per-process page tables in some firmware versions - as an example Rb3Gen2 has no GPU without this. Add X1E Devkit to the list of devices that has functional EFI variable access through the uefisecapp. Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver, as this only applies to a single platform, and introduce support for QCS8300, QCS615, SAR2130P, and SAR1130P. Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmc0G8EVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FNLwP/1g/MKjDI3AT0esqzTvD5AUgpCab Vb20nlK57Qt64k6WdQ8DLVygA7sb9iB5mq/KYSr3k4+S1DdG8qLzRkL0N/uD9Hwv AHEb7pPtuFIFSsV8+o41SPn30lg6AkxkjbGgMUDrT0hvZcBxUzGHRFbs8HM5ShCg i1Sy/eZje+iX8wOF5xW960eMT3e/8FvW145nLi1uYuaCyCh0A/wNpahjtKpA0q6A s3rnhDye6qJQxcd0xk7fYCbc39iBF4D1Jvrog6Mc4TLKdLULnXIPIJxc7NRm8uGw WbhYwNsYmCGkErAorvPtEDacYxi7sFAwMD+ALayBnhnsU/l5Nz44JfZwIqKUg+WJ bsc+kJRT3oIfwfSJO+tBFI80XDCiTb6Wyyn2lemO1L5NQgDMLxFXBo7tadScS2FM /QEYJvZj4SVfG6rpfD/+4ZVw6FjKnkhDTYoB4Q4uqia4GLfZtIl925xJtaNCtQNM nku4sL+HK2HdL1HuZuVE1Uamt62sdzL2iqwctcjoPpIcq+WB8XwPfshg/iO57vao IFVcPUs/enoCU7PtovQWrI+CcVxaZvOOst4M0Pou9DBi3jGLbVdS9/kt7HEFwbD9 qmdydfPZty2lMHvFl5Q6PzfszGf4+78em/dtz5/BUgB2C7Y56427fbbu0g+ADf8w z8Hq5lM++Qh7SwNd =Wqwn -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmc05DAACgkQYKtH/8kJ UidXZQ//b9NHOLIaYNBcxSFT5ibK1orcCpWcUQlzkwKRwz8kXMsXW41t3R/Ab1Wk nJhQFwWL28sDtDTK13mdfSM4dnDuoqtjIk4/40LGyivla7m5LCPr775xFYJzfRPc z0gZvabNp4syKC4l5FCFILOxeYE2cyDkzGMxlTg5ztUfF4AsFr3PrJq9wmvhfQo8 GRm6XSsAaq7cshEwYqJRtDfR3i6vzaqbbn54/HHBTpMZnhus2iZk92Q1gEekD2fi UjySAmdOFCjCIPCxxrRMEPupHjT20DqJVK//m/kNCNAw4i4049o1Xu/KjoymPQNa Wg/UjS5Lsne58dFI1Kmmdat9nqrVrd0ZXQd4mpERSJKYAGptO73PNofzFDvtuLYX V3usgZIZJzk/L+amkVIeY/Ot8fPgiRgb2G5SIcWcIBqiUtwNyw3TOnxcswcml8JA gzneVx4LryrRPrjJGTb1LqefwH4Rs48RpKUVDrHN7vxK3r3EKirqxQtTic7kdrJp GbR0OdkfIcLF3k4uSMDSfKlIB7kcldGdJw8ZJY0Qn4yJr7Uss+N4jk6U8eqkW0AC 0LKGXk4ym9t8rFYnfck/toGDtXMFnjNFnY+SYq9F241Ux08l2stme14PG7Mu0tyY dxEbV1FYkxy55LVYgW0hK/Y5+ogGusNfJICZSTen6NDGK38+x4I= =yuqG -----END PGP SIGNATURE----- Merge tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers A few more Qualcomm driver updates for v6.13 Make the Adreno driver invoke the SMMU aperture setup firmware function, which is required to allow the GPU to manage per-process page tables in some firmware versions - as an example Rb3Gen2 has no GPU without this. Add X1E Devkit to the list of devices that has functional EFI variable access through the uefisecapp. Flip the "manual slice configuration quirk" in the Qualcomm LLCC driver, as this only applies to a single platform, and introduce support for QCS8300, QCS615, SAR2130P, and SAR1130P. Lastly, add IPQ5424 and IPQ5404 to the Qualcomm socinfo driver. * tag 'qcom-drivers-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: ice: Remove the device_link field in qcom_ice drm/msm/adreno: Setup SMMU aparture for per-process page table firmware: qcom: scm: Introduce CP_SMMU_APERTURE_ID soc: qcom: socinfo: add IPQ5424/IPQ5404 SoC ID dt-bindings: arm: qcom,ids: add SoC ID for IPQ5424/IPQ5404 soc: qcom: llcc: Flip the manual slice configuration condition dt-bindings: firmware: qcom,scm: Document sm8750 SCM firmware: qcom: uefisecapp: Allow X1E Devkit devices soc: qcom: llcc: Add LLCC configuration for the QCS8300 platform dt-bindings: cache: qcom,llcc: Document the QCS8300 LLCC soc: qcom: llcc: Add configuration data for QCS615 dt-bindings: cache: qcom,llcc: Document the QCS615 LLCC soc: qcom: llcc: add support for SAR2130P and SAR1130P soc: qcom: llcc: use deciman integers for bit shift values dt-bindings: cache: qcom,llcc: document SAR2130P and SAR1130P Link: https://lore.kernel.org/r/20241113032425.356306-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-13 18:38:56 +01:00
Melody Olvera	21ccadc64d	regulator: dt-bindings: qcom,rpmh: Correct PM8550VE supplies ... The PM8550VE has two more supplies (s1-8) than the PM8550VS (s1-6), so move to a correct if:then: clause to accurately reflect that. Fixes: 902f8c9830 ("regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies") Signed-off-by: Melody Olvera <quic_molvera@quicinc.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20241112003544.2807368-1-quic_molvera@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org>	2024-11-13 13:53:14 +00:00
Ivaylo Ivanov	ae4705e1b1	dt-bindings: timer: actions,owl-timer: convert to YAML ... Convert the Actions Semi Owl timer bindings to DT schema. Changes during conversion: - Add a description - Add "clocks" as a required property, since the driver searches for it - Correct the given example according to owl-s500.dtsi Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241103123513.2890107-1-ivo.ivanov.ivanov1@gmail.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>	2024-11-13 13:49:33 +01:00
Charles Wang	20bcb2734b	dt-bindings: input: Goodix GT7986U SPI HID Touchscreen ... The Goodix GT7986U touch controller report touch data according to the HID protocol through the SPI bus. However, it is incompatible with Microsoft's HID-over-SPI protocol. NOTE: these bindings are distinct from the bindings used with the GT7986U when the chip is running I2C firmware. For some background, see discussion on the mailing lists in the thread: https://lore.kernel.org/r/20241018020815.3098263-2-charles.goodix@gmail.com Signed-off-by: Charles Wang <charles.goodix@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.com>	2024-11-13 10:56:37 +01:00
Arnd Bergmann	16023977b9	Samsung SoC drivers for v6.13 ... Add Samsung ChipID driver support for new SoCs: Exynos8895, Exynos990 and Exynos9810. -----BEGIN PGP SIGNATURE----- iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmcgl1cQHGtyemtAa2Vy bmVsLm9yZwAKCRDBN2bmhouD18oND/9IPWdoSQAeDLQjq6OzWbXGWLuB0KGm2HzT 6d1IRsbzoNks08fnRV/QGWLPTuedNYt/Syk60YTMOP5GiTe28Q09SIpe7IinsPZL VpyndwsOT5qgvJvDh0vddViCpLxqY3M/zKQuCD49KNJVkNovclBOthN+BhXV1jmi 4EWGPzYFboqgY9Np/W1J9RXafFfp1WiJgYgxhRxxRRL4C0EXTzcrWR6q+SHV//4X esv48lEDZZlYtMKFD3hHmyM1WmQnLrCQ/rpCN/1EyhmZkhkkaZx+6XzCoBSdQdZE jpHNmJJjrel+N6YkYIQl24CBmWFC0kMLH4HLdlBqPTxuNtia0yXl3zU4eOg7G8qO 81ozCpgdFx6sy/3kBYjJq0XGCyQYkBwiiWcZbaUSJMh684ucfqwQTN6gjvcYtD0G p+HBh5S9Aswp99B0n5I+Ou0cpyh9JNo8Ixiu4KJvQnjp6+wNOfuTXNLcpogBWFFy aY3QVW/YBUa8X0fT0rFUirJaG7KLNhg/Tqrde46fDXyK+niL2PvDHzd742qjTPq0 kR5pFqgIPYAL2qSBQ7qts0yHCdkNIthsnvKX+RXGSwHupJNNevPGZ6qFXfdfAwrZ Yq3B7q70TxEQYoRcQdcqsYMo7si5sRGaM3YnSyN7ob8VC5gOQ+LMRw5K7KeYE+gO 6GjBXaGT1Q== =vpAZ -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz1CYACgkQYKtH/8kJ UicaeQ//Q5DiMj1E3Vwu7rbxSh1OzQCXNC45bz1jtakWPxHctDUuNgTpHjbX8qTK He4Feb+yqiPS17tAJ/EgPGbZ1eShBtI4qPgfXINg7uBrUH5NmWAug97QDK+oZrBb hwl1Ip/DN6JtBQtFzfadv14DrOxDyVnrZ5u7ag2AvaPUUwWTROFxVSp0ODjFks/9 Z9N0nAKoSVa6UQFk3kUXIYR/ROj7ibWcEdxhacbu1OEfpvW5lvuFbVJ/b1lJ8FJF jucG2QlENbihIMaAMa60MWTWeWTdKX8xFAAA/GPR96M6xZ894gItskV2Mzsfoow+ j0RcyBlNLOic+KQEd2RQyfScE7M4trfexahMXg0ZAgLiNwa6N8b6BfStX5UzqWTx hVq9PSOLu8A4mwD87ZUdfOqvyPCdT1TkypVas9NGwGI0DsXN8JgzbG0ue0tVkGVf 2WTpjuUU3l/HsXPLabL9KdGU2dwsStv5lvNLWrz8kCjCIsYBXuQJqQU2aPxnMR/g PQgG9iCTvzBCCokerHMgaQk5ZiK8D3TemdHufZEIFDZwLxnLW6dJr0B53BYe5DjS u7fnkiImflXGxJqZNrjuhN8l6jWglyalAm0Uet6I1lC+XMb9WnjaURNqPgMZTNYH npy1kUnN7Wq8s4LKY648kfV6VPLLiQh5YdbZRH5BPko2b0G8KiE= =O237 -----END PGP SIGNATURE----- Merge tag 'samsung-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung SoC drivers for v6.13 Add Samsung ChipID driver support for new SoCs: Exynos8895, Exynos990 and Exynos9810. * tag 'samsung-drivers-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: exynos-chipid: Add support for Exynos9810 SoC dt-bindings: hwinfo: samsung,exynos-chipid: Add Samsung exynos9810 compatible soc: samsung: exynos-chipid: Add support for Exynos 990 chipid dt-bindings: hwinfo: exynos-chipid: Add compatible for Exynos 990 chipid soc: samsung: exynos-chipid: add exynos8895 SoC support dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible Link: https://lore.kernel.org/r/20241029081002.21106-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 23:18:14 +01:00
Arnd Bergmann	94dd51c3bc	Apple SoC DT updates for 6.13: ... - Added base DTs for a bunch of non-Mac Apple iDevices (pre-M1) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQSByI3Ki0mXziclZJcd+FPLCI8zYgUCZzINwAAKCRAd+FPLCI8z Yk1GAQDz+XFZssOascDr+D1+wqa5+2t1SpCRj6aTphHFZmPrEQD9GExhKvU/XjWu 7ZGM296FgJHaJ4L1MS8v5AqHrfbHTgs= =RFSL -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0KAACgkQYKtH/8kJ Uiccag//ajmGyz9hq3pog3Q0xxwuqqHplLMbSTHcIH9hAACsA/+JcGIRa+yijrLq AAyCgAd5MCcTwiG2W/8hOsPyJcq7ZR83SrCRXViqPpT5qnm1lUqqJtUYWvrjigYb l+164qUroNpY2UPa6g9r6f0QSxP/wy7WZu+eOntp2KjHoVrPXY/myh4meOg4G9JW Hz92R1rImmPkWC7JgRrtVHbuKz9CuPjog/7pLflrNAVsTb0Ia0tMc+n+8niQs88r YRNM95aDvy04dL/KFBuUx6NGg4D1GRhZJ6bTMYDyYFr+Er1v8n1mPG0NezMOmqD4 x4zadCvr4g9lC6FzMxiVuX1nY6jNj5ifYDQvVTd8oE03dKz9OeYJCGHyFfi0xnL/ i35zaBaCasiJhsYoiiVh5xuUUpaCTO/YWXL75THqjru/heP3639mK7IlSltYlE3N nWkGmofBEHCtrRO7QfUkEx3Jv3Hd/yc8UyfSycGg8C+JDP74Va8S3Bhs4iYWFkY+ DI+ikluq+Uk5i1F0tflIObKo/kAUa2qZK6TdlEySPZp1jHTvgeW3H873llA8gCr4 SFYb2VCLVTZxcxbtqajTMDPpdvIh1D/tcKBIrZ3Xc4XOiuNSzrKCd1M2nynR0o8v nOx0YS+D6h9Y+s0NnEPS4J6mfvnRPdv2l2hJ5W/mdUgaxLayUBQ= =RD3n -----END PGP SIGNATURE----- Merge tag 'asahi-soc-dt-6.13' of https://github.com/AsahiLinux/linux into soc/dt Apple SoC DT updates for 6.13: - Added base DTs for a bunch of non-Mac Apple iDevices (pre-M1) * tag 'asahi-soc-dt-6.13' of https://github.com/AsahiLinux/linux: arm64: Kconfig: Update help text for CONFIG_ARCH_APPLE arm64: dts: apple: Add A11 devices arm64: dts: apple: Add A10X devices arm64: dts: apple: Add A10 devices arm64: dts: apple: Add A9X devices arm64: dts: apple: Add A9 devices arm64: dts: apple: Add A8X devices arm64: dts: apple: Add A8 devices arm64: dts: apple: Add A7 devices dt-bindings: arm: apple: Add A11 devices dt-bindings: arm: apple: Add A10X devices dt-bindings: arm: apple: Add A10 devices dt-bindings: arm: apple: Add A9X devices dt-bindings: arm: apple: Add A9 devices dt-bindings: arm: apple: Add A8X devices dt-bindings: arm: apple: Add A8 devices dt-bindings: arm: apple: Add A7 devices dt-bindings: pinctrl: apple,pinctrl: Add A7-A11 compatibles dt-bindings: watchdog: apple,wdt: Add A7-A11 compatibles dt-bindings: arm: cpus: Add Apple A7-A11 CPU cores Link: https://lore.kernel.org/r/a8a19596-5d46-4562-9555-3b3ae7a5a3e5@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 23:03:12 +01:00
Arnd Bergmann	31257ea09c	More new boards: Rock-5C, Banana Pi P2 Pro ... HDMI output enabled on a huge number of rk3588 boards, now that we have the ability to do that. A new RK356x variant - the RK3566T (with lower max-frequencies). The variant was already in use on some boards which then encoded those OPP differences in the board files itself. This moves this to saner place. Fixed-regulator nowadays has a preferred node-naming scheme set in the binding and we had accumulated a number of different styles over time. A change brings all of them in line for arm64 dts files. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmcyI5cQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgdFWB/49UwXgbADgRWIzSpf7zeD4sp48VO3TD/nI +ql7kTamzS+9UY9PEAMSO7OyiO+hiJgaTaRBYdn4SFAd3vVxpg8bIBLl/vxNoOBx /Nw6ae6zJZ5xymbISsBXIkDyPWJ7hE9PCYrtvF9Y3zJc9WcrH+cXM26q0IKr/+s/ YXXAFvYwG3u4OuJPJ0ENteRJ/CdPFhPHFYBjzv6UYbsHusvxWxcPtL1JKhHBFc9A 1QhBasn1FjQNq12yWHUWpodNoWc2qU7htxsctsoV+Jfikh9ekB5zt8W7xZ5WOcdZ PQYslr0Zpe6hOXgv727cKT9MAUlRU2gacNA+FB+UI67a3+VuQ6WN =6FzO -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0GoACgkQYKtH/8kJ UidMuw//SLw4oponyaio2ILmRJwSnYkuCD+uaYVQehvo9F1RO+2Gddd4aOjBTUwb ttxpr11f7NED5r54M37YebQpyrLZHdrkRc3inrVRWVPoRw9AWdy7toiGs59MDQRp K0VitOBFAWoliYRRZ9Z/fj037uXZEB7eWW/UVKZAVk+Fp4lWrN3xcoNcB0ks7Bkj 9ifo0yn3izG0ENvN9XhWmfD/5xESzgKyWra1crCWMtTbNB/Rvy5ao83ghiWQPJyB tYd3U6JfB9R9uNRvq+UHBDC9sjJKRe7HMj1rje51M0dj0BOaa/kkkML7uAnf5BsL B0QnnIwCatYtMHKfRbzJbsuLDHXGTBrWjS2yWO+2S8l4iEzMcAahJLiOPA6mEPDH AgEnfhxFI8QsJYqnIiKhbqbGpzLvL4gKfwGJFMTyoJQaFHinAQWuAAd9PQ+1UH2+ ar32gWC9wxMA04N3SEABaDjCQBV+UZpRG3EYYD0R2nh+qUYAHpcFhsh/j8fqiiy8 t0huegcCxpGHIi7cuOa3GuweswjFmhwbIXBsc6pp0RKiB2zc1bOOIXL5ubpZ1l/t Tp81shdhC0NBuiLCTCE4ZQXr05dfB5HN6kqNt/zvMUDTZF/tU4Y45G/BQCnaADz8 PTZN95kMlsNKmmtGaXOiDcy430//NN9pW/LEemZeTeW3OgLOoQQ= =hMi+ -----END PGP SIGNATURE----- Merge tag 'v6.13-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt More new boards: Rock-5C, Banana Pi P2 Pro HDMI output enabled on a huge number of rk3588 boards, now that we have the ability to do that. A new RK356x variant - the RK3566T (with lower max-frequencies). The variant was already in use on some boards which then encoded those OPP differences in the board files itself. This moves this to saner place. Fixed-regulator nowadays has a preferred node-naming scheme set in the binding and we had accumulated a number of different styles over time. A change brings all of them in line for arm64 dts files. * tag 'v6.13-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (24 commits) arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25 arm64: dts: rockchip: add Radxa ROCK 5C dt-bindings: arm: rockchip: add Radxa ROCK 5C arm64: dts: rockchip: orangepi-5-plus: Enable GPU arm64: dts: rockchip: enable USB3 on NanoPC-T6 arm64: dts: rockchip: adapt regulator nodenames to preferred form arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2 arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5 arm64: dts: rockchip: Enable HDMI0 on FriendlyElec CM3588 NAS arm64: dts: rockchip: add Banana Pi P2 Pro board dt-bindings: arm: rockchip: add Banana Pi P2 Pro board arm64: dts: rockchip: Add new SoC dtsi for the RK3566T variant arm64: dts: rockchip: Prepare RK356x SoC dtsi files for per-variant OPPs arm64: dts: rockchip: Update CPU OPP voltages in RK356x SoC dtsi arm64: dts: rockchip: Add OPP voltage ranges to RK3399 OP1 SoC dtsi ... Link: https://lore.kernel.org/r/3313711.oiGErgHkdL@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 23:02:17 +01:00
Arnd Bergmann	06fc642c53	Fixed-regulator nowadays has preferred node-naming scheme set in the ... binding. This gets all boards on the same state for Rockchip arm32-dts. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmcyH54QHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgQqLB/9wgQ7tMybGu8ruGGGVcuyDGq28yqp4F53l 2KlIZGKSv9zDmNq/uKQhGAnomQLv7zNPemr7iqDK2QeWmPPm5GclLuxnKe7GA7sL FyQrWWMNgI2ruH+ms8c8LcjzhWR010Vb6sWA/kXBEezW78Y+7EYaPAVdji7ylVH7 o3wgq6GWvc3AGXV7OSjBFeU680snsnwg8rW1DVjUdWVdPNmMyiN4sQlYxGdbTQN/ Vu8rdtROv2qiVhO7KvHfyrwTms56qTon8b3amzmKlFnBGlWOv4svrbwklzL9s+ua aPJe0GWvkGlt9vCnRnh7fi9zLdOWNv7G/DQwJT+r2rXlYCng3CtB =onFR -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmcz0AQACgkQYKtH/8kJ UidCuA//UXJ8LTdhUvr5uBde5DlXftiDYy9VlO6k1bMb+W7T0mGjeA6ysKENC588 8j5fUtmtCRO2nzD/pMp/A02mvi3ZH1ErLEzUZo7HKLjFgIVG0ZoVW31dRbDgkAbx d9wCGC7BHNo681I2xsBucoZwM55mMyeSI/EALVg89V7QYyj9tSjyr7Wj834jMOPp 7cTL/ZVtSkyNIG3+JlFndEQPF2tsYRNclWUUjf2wuWkQm/C9lVr84oi1H8QWtZop tEixFi/kppfV6HXxt2Odk2pWKs7wJivPBVXX1L4ch8rqXUnxigCBPsKm7hmOp7qd oTIm6bUofYzRZEVexnTwYm+Cbazg5b+TsPoB48/SVXeOsV9MuNHSzzmd3nktJj40 pbDOXTu8IBB1TpGHMVcU6e4UyDySDlIZnHxLyZLh5Flmym51Ft+pcni7R2+QG++B VZqkPJ3/UqHPeIYOVk0B/2jG6n/fzMwXQGMO9xusgDEYM7+bs7QjutpTSlVE4p6c 0EUxdsT0JmERyuNo4NfNwR4cBtPIpXASBdT7rxdQOGD5XRg2rEex0j66lk6Gty5+ TPQM+F9PEaqYCYjkuWWQXTKEJ/2gA67OiKuFu4ny5bUHuYJHxtTHSnaQnmRdobW+ c2I3o3oCdG2cYwSIUKgslGX115lhfwflG8xBHlyJKP7uyMyqcBw= =3uQG -----END PGP SIGNATURE----- Merge tag 'v6.13-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Fixed-regulator nowadays has preferred node-naming scheme set in the binding. This gets all boards on the same state for Rockchip arm32-dts. * tag 'v6.13-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: adapt regulator nodenames to preferred form ARM: dts: rockchip: Add Relfor Saib board dt-bindings: arm: rockchip: Add Relfor Saib board dt-bindings: vendor-prefixes: Add Relfor labs ARM: dts: rockchip: Add watchdog node for RV1126 dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string Link: https://lore.kernel.org/r/6740039.4vTCxPXJkl@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 23:00:36 +01:00
Arnd Bergmann	36255ab493	Allwinner Device Tree changes for 6.13 part 2 ... - Remove accidental suniv duplicates in Makefile - Add second source magnetometer for Pine Phone - Add orientation (mount matrix) for Pine Phone's accelerometer and magnetometer - Enable eMMC and MMC on A100 Perf1 -----BEGIN PGP SIGNATURE----- iQJCBAABCgAsFiEE2nN1m/hhnkhOWjtHOJpUIZwPJDAFAmcwtssOHHdlbnNAY3Np ZS5vcmcACgkQOJpUIZwPJDC+zA/9F1YbB88RHtaLKwN/WLQZ3vkQxADhulsixI8X BHQATpsI477csCxjFJre5VPCDT8w77Dy4v0NHzIfZ/vB74wcTsBXoaW7jsSS9SQs V7Z9kf33loRaeY9OUgaJNZLBP0vPCt4GZBlW6VdMsJtID5ZMO0Gl42bFrL+QI8Oo 4ZnINz+gcTZtJFU6h+ZTiCzqGe13NJTD/Q8g/yEjMc38tyvVf3t/IhUyZBHCDHs+ G4Fs0aIpLYbicecRfk4sNTla2vsAezzkyaCu+Kq/W5dWy2vxKKIyarYMNmTmUJfH zed8oRKqqYedAI/1THMhNMTVm1Zr5FluhYBAkbGGVQNeLldBv+5P6Lte4pAUGIFJ Gmg0hWDW2KkIpmAmyVMAKgLtSQXLrwPS5Cls6doDk+6dJBh9unPKgl7CUFGnkJo6 giZSvUi10CKCCf2SEG7KQyHb/dOCwquQf2TMVQvglMbxK4cfdvdryaN4/9z318aE eMQbN9MNpFsLUGtfDMjQJ2cOQBhAGsQROJOwLpjf3cBXl62RXx2iQK2e/DIm6sU0 ElFAAxN7ciq7YlMFZDteEsrAKv9uTsqU7oqxVJFJbwRMhC/hPpknMIsPAzmQSfPx WgM1xVUeECDF9suhWAHBWVXi4gY3fTUxUk0UgkRrpPwfAmcECyGqVLU0JOKwowGP 4/xFtBs= =vpQK -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczz24ACgkQYKtH/8kJ Uie1ng/+MJ9Uwv80VTf/qSmm2706bDiDg8A7r1lMeSTD/o57rcg6sfUjHUfLfbRb 9LWIxOPFgqh+9J3NsivlMC2s3aIGqCJIXzC/0AXgfmwnE5/fKac7gZgctbZRRbJD 3Uz403tcmRgTHrNpOEg74Yak0HC61gQeR7AtqeuvDz2KbMCvUR3qbpOZ2EqChxxv JDGBXVgrke3x6Cexawsf+DX/lBt5A+MMuPPNRdUS9ZIem5T/l0QjboLJU0lHt8MW BSfCeZx4SrigHwhHqJxYjVs9KhNIS/se7/QQ0Huw3rBKq/rN+506KduwZ1+r2P5n x5TrUt12kzsYPIyruXNBOQLo7fwgQ5dxxiphCMoagVA7CwT1ggnGmuoEEQeWW1KB e8gCb2WajgQmNzk9Gd3fG/cr8OjxMI9c5YEu/dy8Gy0UFzh2XD5q8Z2mEDPx01JI L8hpaMsRHntoKHK5nWeEsG9q+PcNMgGco7UOC0wpdlxbZwAJP8Q5eRzt9GglMIoX 6TbAoiEA7rXI04ijkCAJ7pL6cCEbSIt1QY5eIKIohZYhj27sKvVkT/Kt9VIghoy6 +GqzstDCf6Stf7erlV7Vfp2bwYefxiQtxA099XDaB16hHO3UfCwxnv+wG4cVCFL2 EmVTsALzS5c+WGoUAcXitCoWhD5VAPGVbCrGRFvu5rraW/wNFpw= =4WAW -----END PGP SIGNATURE----- Merge tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner Device Tree changes for 6.13 part 2 - Remove accidental suniv duplicates in Makefile - Add second source magnetometer for Pine Phone - Add orientation (mount matrix) for Pine Phone's accelerometer and magnetometer - Enable eMMC and MMC on A100 Perf1 * tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer arm64: dts: sun50i-a64-pinephone: Add mount-matrix for PinePhone magnetometers arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone ARM: dts: allwinner: Remove accidental suniv duplicates arm64: allwinner: a100: Add MMC related nodes arm64: dts: allwinner: a100: add usb related nodes dt-bindings: usb: sunxi-musb: Add A100 compatible string dt-bindings: usb: Add A100 compatible string dt-bindings: phy: sun50i-a64: add a100 compatible arm64: dts: allwinner: a100: add watchdog node arm64: dts: allwinner: A100: Add PMU mode ARM: dts: sunxi: add support for RerVision A33-Vstar board dt-bindings: arm: sunxi: document RerVision A33-Vstar board arm64: dts: allwinner: Add disable-wp for boards with micro SD card arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards arm64: dts: allwinner: h616: Add audio codec node Link: https://lore.kernel.org/r/ZzC-OF57MT_yCeWH@wens.tw Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 22:58:06 +01:00
Arnd Bergmann	6660a1236f	RISC-V Devicetrees for v6.13 ... StarFive: Support for the DeepComputing FML13V01, a Framework laptop compatible with a JH7110. This board is fairly different to the more standard SBCs offerings that the kernel already supports, so there's also some refactoring of jh7110-common.dtsi to move out nodes unused on the new board. Spacemit: A vendor prefix I grabbed from the basic support series, since its dependencies are not yet ready but peripheral drivers have started being merged. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZy3atgAKCRB4tDGHoIJi 0j5TAP94t5ZS+Twusvf5ll28KRGY3GWeFDquXgqSeb58PrXpvAEAmSMfmo4RtadB Juh06Pu7ZiqWpQ0/StFcDboQqdZZLgM= =K0KY -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczz0AACgkQYKtH/8kJ Uid6RxAAqDyGogK3WkI7NkecA8wjaRuOms7aLfsVLDaJOrB76Ef+R4GIzJyP+Blp X1cOydidIo0kn1VyIZfNXLFYN710SfKUs5sKGF1Io/qC4WPCW8psfWiFlLHboH/e 2/m7mOFY8OrzSDXgNmqaouAq/BXMlE1HO2q4CxrDhYu9zxr0XI7hjdGHnL737n0z x/U/0FY+s5Jqtm4ilFuK9eAs8uwzpvOhGfsdXYidJE3RiVC0TWgbzt0/pMlM74Sr XAIpnNSEpyUZGAApVKnta64Z/or4i/Hvaa4t0AdfUFPC9lxPaXM83KSQlLmXUZDW ADpMirltR2PEWgLON5xW88lEJRNem6VPa20h4x5mClle5yEIrdcfeh42jMdqwkNA 1/UwzbLFx8NVNNd4WdykALsrEOupVo4WO6QX0wWxnp60JpmHef0/hQ/eSVs3zlAS LBqQ+Ycd/yWh6BYjBjhIOxvE3pyYduO26beGZFaC/8MPnbmoJ+hX+wvGk9Mh27pH gNjqSJeGOSdqkaLhizkTmvjFiottmS2+4mCIj2yKrNV74baW7yaatMEgBShBhMuJ nU1HbGNxNZdWfDYH9arXvHdXSFL0E5NqgftPqiLYGU1gXudWNHAp8hOgBR1o5vBh 4khWIPjp2M767LUZgICGdzDL51GRTttY/zoMwuC6/NWbdxB10Hc= =jxMB -----END PGP SIGNATURE----- Merge tag 'riscv-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.13 StarFive: Support for the DeepComputing FML13V01, a Framework laptop compatible with a JH7110. This board is fairly different to the more standard SBCs offerings that the kernel already supports, so there's also some refactoring of jh7110-common.dtsi to move out nodes unused on the new board. Spacemit: A vendor prefix I grabbed from the basic support series, since its dependencies are not yet ready but peripheral drivers have started being merged. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: add DeepComputing FML13V01 board device tree dt-bindings: riscv: starfive: add deepcomputing,fml13v01 dt-bindings: vendor: add deepcomputing riscv: dts: starfive: jh7110-common: move usb0 config to board dts riscv: dts: starfive: jh7110-common: revised device node dt-bindings: vendor-prefixes: add spacemit Link: https://lore.kernel.org/r/20241108-washboard-material-6b9ff196063d@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 22:57:20 +01:00
Marek Vasut	80bc64201e	dt-bindings: hwmon: pwm-fan: Document start from stopped state properties ... Delta AFC0612DB-F00 fan has to be set to at least 30% PWM duty cycle to spin up from a stopped state, and can be afterward throttled down to lower PWM duty cycle. Introduce support for operating such fans which need to start at higher PWM duty cycle first and can slow down next. Document two new DT properties, "fan-stop-to-start-percent" and "fan-stop-to-start-usec". The former describes the minimum percent of fan RPM at which it will surely spin up from stopped state. This value can be found in the fan datasheet and can be converted to PWM duty cycle easily. The "fan-stop-to-start-usec" describes the minimum time in microseconds for which the fan has to be set to stopped state start RPM for the fan to surely spin up. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Message-ID: <20241106185925.223736-1-marex@denx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2024-11-12 13:54:55 -08:00
Frank Li	4585580781	dt-bindings: hwmon: ti,tmp108: Add nxp,p3t1085 compatible string ... The register layout of P3T1085 is the same as ti,tmp108. Add compatible string nxp,p3t1085 for it. The difference of P3T1085 is support I3C. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Frank Li <Frank.Li@nxp.com> Message-ID: <20241111-p3t1085-v3-1-bff511550aad@nxp.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2024-11-12 13:54:55 -08:00
Jerome Brunet	2fc032ec1d	dt-bindings: hwmon: pmbus: add ti tps25990 support ... Add DT binding for the Texas Instruments TPS25990 eFuse Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Message-ID: <20241105-tps25990-v4-6-0e312ac70b62@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>	2024-11-12 13:54:55 -08:00
Arnd Bergmann	d745bdcb7a	TI K3 device tree updates for v6.13 ... Generic Fixups/Cleanups: - Cleanup bootph-* tags to limit to leaf nodes only - clock IDs for MCSPI instances fixed up across J7xx family - Misc indentation and whitespace cleanup across dts New SoC - J742s2 which is a cutdown of existing J784s4 and uses same EVM SoC Specific features and Fixes: - eQEP (counter) support across AM64/AM62/AM62A AM64 - M4F Remoteproc support - stats collection support for ICSSGs via ti,pa-stats - Add PCIe EP overlays AM65 - stats collection support for ICSSGs via ti,pa-stats AM62: - M4F Remoteproc support - eMMC/SD TAP value updates - dtbs_check fixes for opp_efuse_table AM62A - 1.4GHz opp entry AM62P - 1.4GHz opp entry J7200 - Add PCIe EP overlays - Pinmux node reg range fixes Board Specific AM62 - am62 verdin ivy carrier board support - am625-verdin TPM device support - am62 verdin ivy board support - Beagleplay Mikrobus PWM header support - am62-verdin increase SD regulator startup delay AM64 - am642-phyboard-electra-rdk trickle charger support - am64-phy* drop buswidth from sdhci nodes -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEEyRC2zAhGcGjrhiNExEYeRXyRFuMFAmcp9KAQHHZpZ25lc2hy QHRpLmNvbQAKCRDERh5FfJEW40WlCAClaeiGzfL3a9da/KtAeee7H7Q+XWbjZod9 rysiexvCisp+aG9XUnHgS+zuiyYXHBRwpXVnOF5tKxrcOvmxloqOLr/5ZjWCtJKT efCrgAmZfpwnBXlNQzUwYVmJ5j1hOTVowa01uMVZd5vGwMa+GUjaZe+jakbI+EOn 4F7dlNW6YTnwFvpyIiFCkVd3vXLNYNmpsbOT+ax6+uuRzDJ7z4QFQuWNvHLy/c9r HG6AUXLR8EB2+MhJVSp41mrh8N4Tdwledtbs+VbzMMvMzlErMpx9AEeqOqp9cmo7 vNGXu5K/Abaozp1PryaxH1r0OPpKxL1nyUZ5xT9FpuXI0NpTxAuk =E9iT -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczzh8ACgkQYKtH/8kJ Uid1jg//YlvVspOI+zVkGezhyToEvTxefDWs7pMmceo62Xu++i7XxIvZ/C9yUz7O gPJ4rp/pXGMkQuwZSkTH21DwGpXJC2xTbZ10meuSwiiDXys25VnYcQO3/PxqcY5j JEib8S0FVLqPBYwn6WCjKtznD+RKUNLiMbN/6vWvZfJMbpCVysJDP2LYTYWAmsm8 0gvyJU45xxYN+lhMWqjQXdtbycjTCidT5ZRIedvvV3sp5XwLOzNZLXgnezqdrCIV EHCYZjai70atPAcUeBOjpr6RFN2NqKXx610vKdBNxjvltBYGCxk5vovYXJOjoxBl uWZz/uq4LIxUfRIov31vEE1BtOeP1/xorowSL6PTrYLT863D3kQ+OyqIBr/LJlsk S6OubK5dVJBJnuwohvpb/Vsqg3GuiHVRoRUAWGvfO27b7K1J752Zo7wJW4So/d+v 39N0k240xjqunfcDL/A/08FPliCUfx1qma3PQQc7brPDVyOo9o94yrbZxpbJpjsn uRoIVnty9Zi2JAL+aYAAy3t0LFxQ2hDlCDIvcz9NhHQzpmc4FWzdRKbqptgnGaLf 2ifDZPfNqYK/TTQT6QwGDI4EfQNTTqLIEJUo6FigyVaS3tyvKcUYyP0m/5zAk6GD Jo3F519d/mDCPTtJAtm5O0HPsXXvO4Z3NnIfVeoDPeU+zDk6wNw= =ngkz -----END PGP SIGNATURE----- Merge tag 'ti-k3-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.13 Generic Fixups/Cleanups: - Cleanup bootph-* tags to limit to leaf nodes only - clock IDs for MCSPI instances fixed up across J7xx family - Misc indentation and whitespace cleanup across dts New SoC - J742s2 which is a cutdown of existing J784s4 and uses same EVM SoC Specific features and Fixes: - eQEP (counter) support across AM64/AM62/AM62A AM64 - M4F Remoteproc support - stats collection support for ICSSGs via ti,pa-stats - Add PCIe EP overlays AM65 - stats collection support for ICSSGs via ti,pa-stats AM62: - M4F Remoteproc support - eMMC/SD TAP value updates - dtbs_check fixes for opp_efuse_table AM62A - 1.4GHz opp entry AM62P - 1.4GHz opp entry J7200 - Add PCIe EP overlays - Pinmux node reg range fixes Board Specific AM62 - am62 verdin ivy carrier board support - am625-verdin TPM device support - am62 verdin ivy board support - Beagleplay Mikrobus PWM header support - am62-verdin increase SD regulator startup delay AM64 - am642-phyboard-electra-rdk trickle charger support - am64-phy* drop buswidth from sdhci nodes * tag 'ti-k3-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (61 commits) arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon arm64: dts: ti: k3-am62p5-sk: add 1.4ghz opp entry arm64: dts: ti: k3-am62p: add opp frequencies arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry arm64: dts: ti: k3-am62a: add opp frequencies arm64: dts: ti: k3-am62-verdin: Add Ivy carrier board arm64: dts: ti: k3-am62-verdin: add label to som adc node dt-bindings: arm: ti: Add verdin am62 ivy board arm64: dts: ti: k3-am642-phyboard-electra-rdk: Enable trickle charger arm64: dts: ti: k3-am64-phycore-som: Add M4F remoteproc nodes arm64: dts: ti: k3-am62-phycore-som: Add M4F remoteproc nodes arm64: dts: ti: minor whitespace cleanup arm64: dts: ti: k3-am62x-phyboard-lyra: Fix indentation in audio-card arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fix bus-width property in MMC nodes arm64: dts: ti: k3-am64-phycore-som: Fix bus-width property in MMC nodes arm64: dts: ti: k3-am642-evm: Add overlay for PCIe0 EP mode arm64: dts: ti: k3-j7200-evm: Add overlay for PCIE1 Endpoint Mode arm64: dts: ti: k3-am62-main: Update otap/itap values arm64: dts: ti: k3-am625-beagleplay: Enable MikroBUS PWM arm64: dts: ti: k3-am62-verdin: Fix SD regulator startup delay ... Link: https://lore.kernel.org/r/3ded4795-2186-4e06-bda6-9c9a65a3fdb9@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 22:52:31 +01:00
Arnd Bergmann	f50f6052c3	Qualcomm Arm64 DeviceTree changes for v6.13 ... Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G, X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride" development boards thereon, and the SM7325 platform and the Nothing Phone 1. MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi calibration variant. On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2 enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins are adjusted and PMU nodes' compatibles for the two clusters are corrected. The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to DeviceTree overlays, and both gains CMA heap for libcamera to use. SA8775P gains GPI DMA support, support for controlling download mode (bootloader-assisted ramdump support), additional UARTs, and qcrypto support. The "Ride" development board gains WiFi and Bluetooth support. On SC8280XP (8cx Gen3) another UART is described, used in the Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit is described on the CRD and Lenovo ThinkPad X13s. On SDM630/660 the GPU SMMU and clock controller is added, as is the A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and WiFi is then enabled on the Inforce 6560 development board. On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC controller, to enable hotplug. On X Elite, USB Type-C controllers are marked as usb-role-switch capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and wired up to allow setting and cleaning the download mode (bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are updated. USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook S15. The T14s also gains support for a second source trackpad. The Microsoft Surface Laptop gains LID switch and the USB Type-A connector attached to the multiport controller is enabled. The CRD has its HID device power supplies described. Application SMMU is flagged as DMA coherent across QDU1000, SC7180, SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100. In addition to this, the effort to improve style and binding compliance continued. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmcqTFoVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FTLEQALnrquJONM9qtUC8E2dw5VGuA5UJ hJLahtYsspCCgpCGxzlvX9kF79gDko9CSU2A/xLjXT0OB+OzAsUniQhNWufnpEP9 JPQ+MOWQp+7UtxL+WNnTmiYaU2nR0gurZhji3gmnMP4sJqiZmH7hGADSYVb5K5G3 FRAgf1zNwrezW50ZPLsLQqnQRdGfjGyiy0HfVu2NXMk4mkFmaAsw12rFdqIixBq1 V9STUywmaXbMCfhOZlN79cjjswyBWz+y196gIgjpitHhoY1s7MGwjYiBYXnor+FH w5AcoyRs5jxqbnVb12DtzrP0peml4OMdKwdHFq1EY0cVBaNK0+CtG8eew7PssbUH Hz4hztK8BBCNMMQbpSW4aqXeDe3EcCNnFVtuX4B100oCTLWpBiKP203NXVttjxt/ YFch9OoIcQv+ouYzZgJs345bj48UoEX+PusAEo2NeWK19hesA3eNZlslovNSrbn6 SZoxqQ60nKO+bpncsDBmy68vl/cWawqdrjBENDUL9PeJdzfDoaPGkRJmrbkKb971 xWFzjUTFnJQJVdywOLhSCAkxGVHL2T0DaIsqVJYkNKgCtOhghJ2IWUk4Mk4ueLD3 fGGXbY2VGFSI7J/Aq+80rQcmDR2glVvEbebfmqzWYjyQPJnbg8xey4WxgSjpiCur TEaBGSyFrcO1sPJs =Qu8Z -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczzIIACgkQYKtH/8kJ UidW2A//U7s3EZaJdA4cL6wT3SCb1IGdU4DzsALPJuVlRiQuCiT4C+r/9+k7p6vf 4sny9ZvvadjtM9Goext4T40rVjw00kcgpI3tE3UzEgDr6yws/7AnpI8/Oo7A2Kd3 1vn2OBeRMS+HqQKhyjZ2rAtMnSUw7aQ69tVCbc5YeWPN3Tj4dI0/Agg12RZSuz3B 75aVDiURhzcPTDsnywYXaEzDH0Jkk4+wcmIMk5ll28s+lOlL2YjEGeLeoBFriJss 4tv4ir5blhlMMWFPRif9cxp1msrd+7nLYBKtBW/65+If5Od3aCg0I6H7beMAFRCr H2mO0RadU/E7Q00i8pT48/5/vaDFpyEuvdxRdq4LVkfoqOVnIvj+hV7BMrQpudyy /0R1+13FNjKrBI/4UcgaZH06N/i0A296Sxj53jEDgoB/hqr4XpzzrrxvApu44BEU dJLGr2LEOe7+rfhXcu8kRwtuza6F0gYL5SfL1zNGfcdSeUNyKd/9j1FqTvmJsBSW 5zZfgHuiuGb86FSOvIXhEIxKyC19aO8El8tiqGOX2e8HsG23pLJTS6yUQqGxlvt6 2WSwIzgn7XBOAaCePcVDkpau5rpcqNt2X5Ka9+M2ebXdInjRPHXA9G0LBUbrHYvU LcCtK0m7wyDkQYIwuDEBg/xsrg4hpRsvCV5DRR6oD9jtixGnWRU= =JBWR -----END PGP SIGNATURE----- Merge tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree changes for v6.13 Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G, X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride" development boards thereon, and the SM7325 platform and the Nothing Phone 1. MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi calibration variant. On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2 enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins are adjusted and PMU nodes' compatibles for the two clusters are corrected. The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to DeviceTree overlays, and both gains CMA heap for libcamera to use. SA8775P gains GPI DMA support, support for controlling download mode (bootloader-assisted ramdump support), additional UARTs, and qcrypto support. The "Ride" development board gains WiFi and Bluetooth support. On SC8280XP (8cx Gen3) another UART is described, used in the Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit is described on the CRD and Lenovo ThinkPad X13s. On SDM630/660 the GPU SMMU and clock controller is added, as is the A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and WiFi is then enabled on the Inforce 6560 development board. On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC controller, to enable hotplug. On X Elite, USB Type-C controllers are marked as usb-role-switch capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and wired up to allow setting and cleaning the download mode (bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are updated. USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook S15. The T14s also gains support for a second source trackpad. The Microsoft Surface Laptop gains LID switch and the USB Type-A connector attached to the multiport controller is enabled. The CRD has its HID device power supplies described. Application SMMU is flagged as DMA coherent across QDU1000, SC7180, SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100. In addition to this, the effort to improve style and binding compliance continued. * tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits) arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10 arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855 arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855 arm64: dts: qcom: sc8280xp-crd: enable bluetooth arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855 arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3 arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers arm64: dts: qcom: x1e80100-crd: describe HID supplies arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variant arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes ... Link: https://lore.kernel.org/r/20241105164901.7787-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 22:45:37 +01:00
Arnd Bergmann	8cd0d9b997	Renesas DTS updates for v6.13 (take two) ... - Add a CPU Operating Performance Points table for the RZ/V2H SoC, - Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S SoC and the RZ/G3S SMARC SoM, - Add DMAC support for MMC on the RZ/A1H SoC and the Genmai development board, - Miscellaneous fixes and improvements. -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZyjGagAKCRCKwlD9ZEnx cHrRAPsETRczaN2vpy+9m0EJuN+QhlX980jiLYndIx8YUvMG3QD/XdLdG4MnGQtg 2x8u2BfbbXOIrV2YWErVIVn/bQNAMgk= =FjWC -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmczy8sACgkQYKtH/8kJ UiewXw//cs/9vlIVVRkS/BUR3O2cMDvkbKqqoAuQjMHUXWyK4QR4e7+DiWm5LSeQ XPn4ny+Aaq1W3Xms6fn5axiW0F34/RoyPDjYLfX9vikAfhPM+tX6MOkxF3hi+ZAw laxl8vYjFe+NBXBB8MLF1ULRT8FViA/ND90QrDBRK9EIVM7B3YoDDTxwuG0eaCJj inMRwvLQlxyHaspl4SLaiE1MfhkYe85203SWh6//7d1ZVTF9SKqMA7YjDqJ5Y32b +SgDIyMALbOso7uZVaB7PkPVCQwWdrqf494eukROC+pJPvPkmnAiNox7aEBF0IOa aBU3kMYUQ/VUUj8D7w3gD2ywYDcKG8tdWBpAGqe+XmJ2OmvQnpFzKZPkRL7EheAH edR3Jd6XMi/9cGOxf3iSpWG/nE4ilKuDtz0QUHnpf6mqBLDeJxMoaq8a4F5HKb6x upKm7rdVShbU5HCHnO/SANgXYt63IisO9KCoQkvEwEsxx3Yz6/xmjnX01x32HG94 FDQYizN6ZtJdjTJQQV0wLV8KMVlhRVtFsYwNSxwbCT172uyoUWqM9PdA2eQZciDQ YtFBl1b+Qn0c77eN5dAbrbM2RmzmJ/dGjMreDwBB4gTh1NJanw8kzO940INXbVkz 41DvH2mqMQG8z/Z/8j7sVxJFPXJJrsDDlZLxhatY4lSa2X4gFjc= =7QOY -----END PGP SIGNATURE----- Merge tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.13 (take two) - Add a CPU Operating Performance Points table for the RZ/V2H SoC, - Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S SoC and the RZ/G3S SMARC SoM, - Add DMAC support for MMC on the RZ/A1H SoC and the Genmai development board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: rzg3s-smarc-som: Enable RTC arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB arm64: dts: renesas: r9a08g045: Add RTC node arm64: dts: renesas: r9a08g045: Add VBATTB node arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ ARM: dts: renesas: r7s72100: Add DMA support to MMCIF ARM: dts: renesas: r7s72100: Add DMAC node arm64: dts: renesas: hihope: Drop #sound-dai-cells dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC arm64: dts: renesas: r9a09g057: Add OPP table Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>	2024-11-12 22:42:35 +01:00