linux/arch/x86/kvm/cpuid.c

1459 lines
40 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Kernel-based Virtual Machine driver for Linux
* cpuid support routines
*
* derived from arch/x86/kvm/x86.c
*
* Copyright 2011 Red Hat, Inc. and/or its affiliates.
* Copyright IBM Corporation, 2008
*/
#include <linux/kvm_host.h>
x86/kvm: Audit and remove any unnecessary uses of module.h Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of kvm where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace as needed. Several instances got replaced with moduleparam.h since that was really all that was required for those particular files. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/20160714001901.31603-8-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-14 00:19:00 +00:00
#include <linux/export.h>
#include <linux/vmalloc.h>
#include <linux/uaccess.h>
#include <linux/sched/stat.h>
#include <asm/processor.h>
#include <asm/user.h>
#include <asm/fpu/xstate.h>
#include <asm/sgx.h>
#include "cpuid.h"
#include "lapic.h"
#include "mmu.h"
#include "trace.h"
#include "pmu.h"
/*
* Unlike "struct cpuinfo_x86.x86_capability", kvm_cpu_caps doesn't need to be
* aligned to sizeof(unsigned long) because it's not accessed via bitops.
*/
u32 kvm_cpu_caps[NR_KVM_CPU_CAPS] __read_mostly;
EXPORT_SYMBOL_GPL(kvm_cpu_caps);
u32 xstate_required_size(u64 xstate_bv, bool compacted)
{
int feature_bit = 0;
u32 ret = XSAVE_HDR_SIZE + XSAVE_HDR_OFFSET;
x86/fpu: Rename XSAVE macros There are two concepts that have some confusing naming: 1. Extended State Component numbers (currently called XFEATURE_BIT_*) 2. Extended State Component masks (currently called XSTATE_*) The numbers are (currently) from 0-9. State component 3 is the bounds registers for MPX, for instance. But when we want to enable "state component 3", we go set a bit in XCR0. The bit we set is 1<<3. We can check to see if a state component feature is enabled by looking at its bit. The current 'xfeature_bit's are at best xfeature bit _numbers_. Calling them bits is at best inconsistent with ending the enum list with 'XFEATURES_NR_MAX'. This patch renames the enum to be 'xfeature'. These also happen to be what the Intel documentation calls a "state component". We also want to differentiate these from the "XSTATE_*" macros. The "XSTATE_*" macros are a mask, and we rename them to match. These macros are reasonably widely used so this patch is a wee bit big, but this really is just a rename. The only non-mechanical part of this is the s/XSTATE_EXTEND_MASK/XFEATURE_MASK_EXTEND/ We need a better name for it, but that's another patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: dave@sr71.net Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/20150902233126.38653250@viggo.jf.intel.com [ Ported to v4.3-rc1. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-02 23:31:26 +00:00
xstate_bv &= XFEATURE_MASK_EXTEND;
while (xstate_bv) {
if (xstate_bv & 0x1) {
u32 eax, ebx, ecx, edx, offset;
cpuid_count(0xD, feature_bit, &eax, &ebx, &ecx, &edx);
/* ECX[1]: 64B alignment in compacted form */
if (compacted)
offset = (ecx & 0x2) ? ALIGN(ret, 64) : ret;
else
offset = ebx;
ret = max(ret, offset + eax);
}
xstate_bv >>= 1;
feature_bit++;
}
return ret;
}
KVM: x86: Expose Predictive Store Forwarding Disable Predictive Store Forwarding: AMD Zen3 processors feature a new technology called Predictive Store Forwarding (PSF). PSF is a hardware-based micro-architectural optimization designed to improve the performance of code execution by predicting address dependencies between loads and stores. How PSF works: It is very common for a CPU to execute a load instruction to an address that was recently written by a store. Modern CPUs implement a technique known as Store-To-Load-Forwarding (STLF) to improve performance in such cases. With STLF, data from the store is forwarded directly to the load without having to wait for it to be written to memory. In a typical CPU, STLF occurs after the address of both the load and store are calculated and determined to match. PSF expands on this by speculating on the relationship between loads and stores without waiting for the address calculation to complete. With PSF, the CPU learns over time the relationship between loads and stores. If STLF typically occurs between a particular store and load, the CPU will remember this. In typical code, PSF provides a performance benefit by speculating on the load result and allowing later instructions to begin execution sooner than they otherwise would be able to. The details of security analysis of AMD predictive store forwarding is documented here. https://www.amd.com/system/files/documents/security-analysis-predictive-store-forwarding.pdf Predictive Store Forwarding controls: There are two hardware control bits which influence the PSF feature: - MSR 48h bit 2 – Speculative Store Bypass (SSBD) - MSR 48h bit 7 – Predictive Store Forwarding Disable (PSFD) The PSF feature is disabled if either of these bits are set. These bits are controllable on a per-thread basis in an SMT system. By default, both SSBD and PSFD are 0 meaning that the speculation features are enabled. While the SSBD bit disables PSF and speculative store bypass, PSFD only disables PSF. PSFD may be desirable for software which is concerned with the speculative behavior of PSF but desires a smaller performance impact than setting SSBD. Support for PSFD is indicated in CPUID Fn8000_0008 EBX[28]. All processors that support PSF will also support PSFD. Linux kernel does not have the interface to enable/disable PSFD yet. Plan here is to expose the PSFD technology to KVM so that the guest kernel can make use of it if they wish to. Signed-off-by: Babu Moger <Babu.Moger@amd.com> Message-Id: <163244601049.30292.5855870305350227855.stgit@bmoger-ubuntu> [Keep feature private to KVM, as requested by Borislav Petkov. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-24 01:15:28 +00:00
/*
* This one is tied to SSB in the user API, and not
* visible in /proc/cpuinfo.
*/
#define KVM_X86_FEATURE_PSFD (13*32+28) /* Predictive Store Forwarding Disable */
#define F feature_bit
#define SF(name) (boot_cpu_has(X86_FEATURE_##name) ? F(name) : 0)
KVM: x86: Expose Predictive Store Forwarding Disable Predictive Store Forwarding: AMD Zen3 processors feature a new technology called Predictive Store Forwarding (PSF). PSF is a hardware-based micro-architectural optimization designed to improve the performance of code execution by predicting address dependencies between loads and stores. How PSF works: It is very common for a CPU to execute a load instruction to an address that was recently written by a store. Modern CPUs implement a technique known as Store-To-Load-Forwarding (STLF) to improve performance in such cases. With STLF, data from the store is forwarded directly to the load without having to wait for it to be written to memory. In a typical CPU, STLF occurs after the address of both the load and store are calculated and determined to match. PSF expands on this by speculating on the relationship between loads and stores without waiting for the address calculation to complete. With PSF, the CPU learns over time the relationship between loads and stores. If STLF typically occurs between a particular store and load, the CPU will remember this. In typical code, PSF provides a performance benefit by speculating on the load result and allowing later instructions to begin execution sooner than they otherwise would be able to. The details of security analysis of AMD predictive store forwarding is documented here. https://www.amd.com/system/files/documents/security-analysis-predictive-store-forwarding.pdf Predictive Store Forwarding controls: There are two hardware control bits which influence the PSF feature: - MSR 48h bit 2 – Speculative Store Bypass (SSBD) - MSR 48h bit 7 – Predictive Store Forwarding Disable (PSFD) The PSF feature is disabled if either of these bits are set. These bits are controllable on a per-thread basis in an SMT system. By default, both SSBD and PSFD are 0 meaning that the speculation features are enabled. While the SSBD bit disables PSF and speculative store bypass, PSFD only disables PSF. PSFD may be desirable for software which is concerned with the speculative behavior of PSF but desires a smaller performance impact than setting SSBD. Support for PSFD is indicated in CPUID Fn8000_0008 EBX[28]. All processors that support PSF will also support PSFD. Linux kernel does not have the interface to enable/disable PSFD yet. Plan here is to expose the PSFD technology to KVM so that the guest kernel can make use of it if they wish to. Signed-off-by: Babu Moger <Babu.Moger@amd.com> Message-Id: <163244601049.30292.5855870305350227855.stgit@bmoger-ubuntu> [Keep feature private to KVM, as requested by Borislav Petkov. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-24 01:15:28 +00:00
static inline struct kvm_cpuid_entry2 *cpuid_entry2_find(
struct kvm_cpuid_entry2 *entries, int nent, u32 function, u32 index)
{
struct kvm_cpuid_entry2 *e;
int i;
for (i = 0; i < nent; i++) {
e = &entries[i];
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks Check whether a CPUID entry's index is significant before checking for a matching index to hack-a-fix an undefined behavior bug due to consuming uninitialized data. RESET/INIT emulation uses kvm_cpuid() to retrieve CPUID.0x1, which does _not_ have a significant index, and fails to initialize the dummy variable that doubles as EBX/ECX/EDX output _and_ ECX, a.k.a. index, input. Practically speaking, it's _extremely_ unlikely any compiler will yield code that causes problems, as the compiler would need to inline the kvm_cpuid() call to detect the uninitialized data, and intentionally hose the kernel, e.g. insert ud2, instead of simply ignoring the result of the index comparison. Although the sketchy "dummy" pattern was introduced in SVM by commit 66f7b72e1171 ("KVM: x86: Make register state after reset conform to specification"), it wasn't actually broken until commit 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the order of operations such that "index" was checked before the significant flag. Avoid consuming uninitialized data by reverting to checking the flag before the index purely so that the fix can be easily backported; the offending RESET/INIT code has been refactored, moved, and consolidated from vendor code to common x86 since the bug was introduced. A future patch will directly address the bad RESET/INIT behavior. The undefined behavior was detected by syzbot + KernelMemorySanitizer. BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68 BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline] kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline] kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183 kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534 vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788 kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020 Local variable ----dummy@kvm_vcpu_reset created at: kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812 kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923 Reported-by: syzbot+f3985126b746b3d59c9d@syzkaller.appspotmail.com Reported-by: Alexander Potapenko <glider@google.com> Fixes: 2a24be79b6b7 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping") Fixes: 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Message-Id: <20210929222426.1855730-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-29 22:24:25 +00:00
if (e->function == function &&
(!(e->flags & KVM_CPUID_FLAG_SIGNIFCANT_INDEX) || e->index == index))
return e;
}
return NULL;
}
static int kvm_check_cpuid(struct kvm_vcpu *vcpu,
struct kvm_cpuid_entry2 *entries,
int nent)
{
struct kvm_cpuid_entry2 *best;
u64 xfeatures;
/*
* The existing code assumes virtual address is 48-bit or 57-bit in the
* canonical address checks; exit if it is ever changed.
*/
best = cpuid_entry2_find(entries, nent, 0x80000008, 0);
if (best) {
int vaddr_bits = (best->eax & 0xff00) >> 8;
if (vaddr_bits != 48 && vaddr_bits != 57 && vaddr_bits != 0)
return -EINVAL;
}
/*
* Exposing dynamic xfeatures to the guest requires additional
* enabling in the FPU, e.g. to expand the guest XSAVE state size.
*/
best = cpuid_entry2_find(entries, nent, 0xd, 0);
if (!best)
return 0;
xfeatures = best->eax | ((u64)best->edx << 32);
xfeatures &= XFEATURE_MASK_USER_DYNAMIC;
if (!xfeatures)
return 0;
return fpu_enable_guest_xfd_features(&vcpu->arch.guest_fpu, xfeatures);
}
/* Check whether the supplied CPUID data is equal to what is already set for the vCPU. */
static int kvm_cpuid_check_equal(struct kvm_vcpu *vcpu, struct kvm_cpuid_entry2 *e2,
int nent)
{
struct kvm_cpuid_entry2 *orig;
int i;
if (nent != vcpu->arch.cpuid_nent)
return -EINVAL;
for (i = 0; i < nent; i++) {
orig = &vcpu->arch.cpuid_entries[i];
if (e2[i].function != orig->function ||
e2[i].index != orig->index ||
e2[i].flags != orig->flags ||
e2[i].eax != orig->eax || e2[i].ebx != orig->ebx ||
e2[i].ecx != orig->ecx || e2[i].edx != orig->edx)
return -EINVAL;
}
return 0;
}
static void kvm_update_kvm_cpuid_base(struct kvm_vcpu *vcpu)
{
u32 function;
struct kvm_cpuid_entry2 *entry;
vcpu->arch.kvm_cpuid_base = 0;
for_each_possible_hypervisor_cpuid_base(function) {
entry = kvm_find_cpuid_entry(vcpu, function, 0);
if (entry) {
u32 signature[3];
signature[0] = entry->ebx;
signature[1] = entry->ecx;
signature[2] = entry->edx;
BUILD_BUG_ON(sizeof(signature) > sizeof(KVM_SIGNATURE));
if (!memcmp(signature, KVM_SIGNATURE, sizeof(signature))) {
vcpu->arch.kvm_cpuid_base = function;
break;
}
}
}
}
static struct kvm_cpuid_entry2 *__kvm_find_kvm_cpuid_features(struct kvm_vcpu *vcpu,
struct kvm_cpuid_entry2 *entries, int nent)
{
u32 base = vcpu->arch.kvm_cpuid_base;
if (!base)
return NULL;
return cpuid_entry2_find(entries, nent, base | KVM_CPUID_FEATURES, 0);
}
static struct kvm_cpuid_entry2 *kvm_find_kvm_cpuid_features(struct kvm_vcpu *vcpu)
{
return __kvm_find_kvm_cpuid_features(vcpu, vcpu->arch.cpuid_entries,
vcpu->arch.cpuid_nent);
}
void kvm_update_pv_runtime(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best = kvm_find_kvm_cpuid_features(vcpu);
/*
* save the feature bitmap to avoid cpuid lookup for every PV
* operation
*/
if (best)
vcpu->arch.pv_cpuid.features = best->eax;
}
/*
* Calculate guest's supported XCR0 taking into account guest CPUID data and
* supported_xcr0 (comprised of host configuration and KVM_SUPPORTED_XCR0).
*/
static u64 cpuid_get_supported_xcr0(struct kvm_cpuid_entry2 *entries, int nent)
{
struct kvm_cpuid_entry2 *best;
best = cpuid_entry2_find(entries, nent, 0xd, 0);
if (!best)
return 0;
return (best->eax | ((u64)best->edx << 32)) & supported_xcr0;
}
static void __kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu, struct kvm_cpuid_entry2 *entries,
int nent)
{
struct kvm_cpuid_entry2 *best;
u64 guest_supported_xcr0 = cpuid_get_supported_xcr0(entries, nent);
best = cpuid_entry2_find(entries, nent, 1, 0);
if (best) {
/* Update OSXSAVE bit */
if (boot_cpu_has(X86_FEATURE_XSAVE))
cpuid_entry_change(best, X86_FEATURE_OSXSAVE,
kvm_read_cr4_bits(vcpu, X86_CR4_OSXSAVE));
cpuid_entry_change(best, X86_FEATURE_APIC,
vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE);
}
best = cpuid_entry2_find(entries, nent, 7, 0);
if (best && boot_cpu_has(X86_FEATURE_PKU) && best->function == 0x7)
cpuid_entry_change(best, X86_FEATURE_OSPKE,
kvm_read_cr4_bits(vcpu, X86_CR4_PKE));
best = cpuid_entry2_find(entries, nent, 0xD, 0);
if (best)
best->ebx = xstate_required_size(vcpu->arch.xcr0, false);
best = cpuid_entry2_find(entries, nent, 0xD, 1);
if (best && (cpuid_entry_has(best, X86_FEATURE_XSAVES) ||
cpuid_entry_has(best, X86_FEATURE_XSAVEC)))
best->ebx = xstate_required_size(vcpu->arch.xcr0, true);
best = __kvm_find_kvm_cpuid_features(vcpu, entries, nent);
if (kvm_hlt_in_guest(vcpu->kvm) && best &&
(best->eax & (1 << KVM_FEATURE_PV_UNHALT)))
best->eax &= ~(1 << KVM_FEATURE_PV_UNHALT);
if (!kvm_check_has_quirk(vcpu->kvm, KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT)) {
best = cpuid_entry2_find(entries, nent, 0x1, 0);
if (best)
cpuid_entry_change(best, X86_FEATURE_MWAIT,
vcpu->arch.ia32_misc_enable_msr &
MSR_IA32_MISC_ENABLE_MWAIT);
}
/*
* Bits 127:0 of the allowed SECS.ATTRIBUTES (CPUID.0x12.0x1) enumerate
* the supported XSAVE Feature Request Mask (XFRM), i.e. the enclave's
* requested XCR0 value. The enclave's XFRM must be a subset of XCRO
* at the time of EENTER, thus adjust the allowed XFRM by the guest's
* supported XCR0. Similar to XCR0 handling, FP and SSE are forced to
* '1' even on CPUs that don't support XSAVE.
*/
best = cpuid_entry2_find(entries, nent, 0x12, 0x1);
if (best) {
best->ecx &= guest_supported_xcr0 & 0xffffffff;
best->edx &= guest_supported_xcr0 >> 32;
best->ecx |= XFEATURE_MASK_FPSSE;
}
}
void kvm_update_cpuid_runtime(struct kvm_vcpu *vcpu)
{
__kvm_update_cpuid_runtime(vcpu, vcpu->arch.cpuid_entries, vcpu->arch.cpuid_nent);
}
EXPORT_SYMBOL_GPL(kvm_update_cpuid_runtime);
static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
struct kvm_cpuid_entry2 *best;
u64 guest_supported_xcr0;
best = kvm_find_cpuid_entry(vcpu, 1, 0);
if (best && apic) {
if (cpuid_entry_has(best, X86_FEATURE_TSC_DEADLINE_TIMER))
apic->lapic_timer.timer_mode_mask = 3 << 17;
else
apic->lapic_timer.timer_mode_mask = 1 << 17;
kvm_apic_set_version(vcpu);
}
guest_supported_xcr0 =
cpuid_get_supported_xcr0(vcpu->arch.cpuid_entries, vcpu->arch.cpuid_nent);
vcpu->arch.guest_fpu.fpstate->user_xfeatures = guest_supported_xcr0;
x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0 During host/guest switch (like in kvm_arch_vcpu_ioctl_run()), the kernel swaps the fpu between host/guest contexts, by using fpu_swap_kvm_fpstate(). When xsave feature is available, the fpu swap is done by: - xsave(s) instruction, with guest's fpstate->xfeatures as mask, is used to store the current state of the fpu registers to a buffer. - xrstor(s) instruction, with (fpu_kernel_cfg.max_features & XFEATURE_MASK_FPSTATE) as mask, is used to put the buffer into fpu regs. For xsave(s) the mask is used to limit what parts of the fpu regs will be copied to the buffer. Likewise on xrstor(s), the mask is used to limit what parts of the fpu regs will be changed. The mask for xsave(s), the guest's fpstate->xfeatures, is defined on kvm_arch_vcpu_create(), which (in summary) sets it to all features supported by the cpu which are enabled on kernel config. This means that xsave(s) will save to guest buffer all the fpu regs contents the cpu has enabled when the guest is paused, even if they are not used. This would not be an issue, if xrstor(s) would also do that. xrstor(s)'s mask for host/guest swap is basically every valid feature contained in kernel config, except XFEATURE_MASK_PKRU. Accordingto kernel src, it is instead switched in switch_to() and flush_thread(). Then, the following happens with a host supporting PKRU starts a guest that does not support it: 1 - Host has XFEATURE_MASK_PKRU set. 1st switch to guest, 2 - xsave(s) fpu regs to host fpustate (buffer has XFEATURE_MASK_PKRU) 3 - xrstor(s) guest fpustate to fpu regs (fpu regs have XFEATURE_MASK_PKRU) 4 - guest runs, then switch back to host, 5 - xsave(s) fpu regs to guest fpstate (buffer now have XFEATURE_MASK_PKRU) 6 - xrstor(s) host fpstate to fpu regs. 7 - kvm_vcpu_ioctl_x86_get_xsave() copy guest fpstate to userspace (with XFEATURE_MASK_PKRU, which should not be supported by guest vcpu) On 5, even though the guest does not support PKRU, it does have the flag set on guest fpstate, which is transferred to userspace via vcpu ioctl KVM_GET_XSAVE. This becomes a problem when the user decides on migrating the above guest to another machine that does not support PKRU: the new host restores guest's fpu regs to as they were before (xrstor(s)), but since the new host don't support PKRU, a general-protection exception ocurs in xrstor(s) and that crashes the guest. This can be solved by making the guest's fpstate->user_xfeatures hold a copy of guest_supported_xcr0. This way, on 7 the only flags copied to userspace will be the ones compatible to guest requirements, and thus there will be no issue during migration. As a bonus, it will also fail if userspace tries to set fpu features (with the KVM_SET_XSAVE ioctl) that are not compatible to the guest configuration. Such features will never be returned by KVM_GET_XSAVE or KVM_GET_XSAVE2. Also, since kvm_vcpu_after_set_cpuid() now sets fpstate->user_xfeatures, there is not need to set it in kvm_check_cpuid(). So, change fpstate_realloc() so it does not touch fpstate->user_xfeatures if a non-NULL guest_fpu is passed, which is the case when kvm_check_cpuid() calls it. Signed-off-by: Leonardo Bras <leobras@redhat.com> Message-Id: <20220217053028.96432-2-leobras@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-02-17 05:30:29 +00:00
kvm_update_pv_runtime(vcpu);
vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu);
vcpu->arch.reserved_gpa_bits = kvm_vcpu_reserved_gpa_bits_raw(vcpu);
kvm_pmu_refresh(vcpu);
vcpu->arch.cr4_guest_rsvd_bits =
__cr4_reserved_bits(guest_cpuid_has, vcpu);
kvm_hv_set_cpuid(vcpu);
/* Invoke the vendor callback only after the above state is updated. */
static_call(kvm_x86_vcpu_after_set_cpuid)(vcpu);
KVM: x86: Use reserved_gpa_bits to calculate reserved PxE bits Use reserved_gpa_bits, which accounts for exceptions to the maxphyaddr rule, e.g. SEV's C-bit, for the page {table,directory,etc...} entry (PxE) reserved bits checks. For SEV, the C-bit is ignored by hardware when walking pages tables, e.g. the APM states: Note that while the guest may choose to set the C-bit explicitly on instruction pages and page table addresses, the value of this bit is a don't-care in such situations as hardware always performs these as private accesses. Such behavior is expected to hold true for other features that repurpose GPA bits, e.g. KVM could theoretically emulate SME or MKTME, which both allow non-zero repurposed bits in the page tables. Conceptually, KVM should apply reserved GPA checks universally, and any features that do not adhere to the basic rule should be explicitly handled, i.e. if a GPA bit is repurposed but not allowed in page tables for whatever reason. Refactor __reset_rsvds_bits_mask() to take the pre-generated reserved bits mask, and opportunistically clean up its code, e.g. to align lines and comments. Practically speaking, this is change is a likely a glorified nop given the current KVM code base. SEV's C-bit is the only repurposed GPA bit, and KVM doesn't support shadowing encrypted page tables (which is theoretically possible via SEV debug APIs). Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210204000117.3303214-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 00:01:13 +00:00
/*
KVM: x86: Force all MMUs to reinitialize if guest CPUID is modified Invalidate all MMUs' roles after a CPUID update to force reinitizliation of the MMU context/helpers. Despite the efforts of commit de3ccd26fafc ("KVM: MMU: record maximum physical address width in kvm_mmu_extended_role"), there are still a handful of CPUID-based properties that affect MMU behavior but are not incorporated into mmu_role. E.g. 1gb hugepage support, AMD vs. Intel handling of bit 8, and SEV's C-Bit location all factor into the guest's reserved PTE bits. The obvious alternative would be to add all such properties to mmu_role, but doing so provides no benefit over simply forcing a reinitialization on every CPUID update, as setting guest CPUID is a rare operation. Note, reinitializing all MMUs after a CPUID update does not fix all of KVM's woes. Specifically, kvm_mmu_page_role doesn't track the CPUID properties, which means that a vCPU can reuse shadow pages that should not exist for the new vCPU model, e.g. that map GPAs that are now illegal (due to MAXPHYADDR changes) or that set bits that are now reserved (PAGE_SIZE for 1gb pages), etc... Tracking the relevant CPUID properties in kvm_mmu_page_role would address the majority of problems, but fully tracking that much state in the shadow page role comes with an unpalatable cost as it would require a non-trivial increase in KVM's memory footprint. The GBPAGES case is even worse, as neither Intel nor AMD provides a way to disable 1gb hugepage support in the hardware page walker, i.e. it's a virtualization hole that can't be closed when using TDP. In other words, resetting the MMU after a CPUID update is largely a superficial fix. But, it will allow reverting the tracking of MAXPHYADDR in the mmu_role, and that case in particular needs to mostly work because KVM's shadow_root_level depends on guest MAXPHYADDR when 5-level paging is supported. For cases where KVM botches guest behavior, the damage is limited to that guest. But for the shadow_root_level, a misconfigured MMU can cause KVM to incorrectly access memory, e.g. due to walking off the end of its shadow page tables. Fixes: 7dcd57552008 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Cc: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210622175739.3610207-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-22 17:56:51 +00:00
* Except for the MMU, which needs to do its thing any vendor specific
* adjustments to the reserved GPA bits.
KVM: x86: Use reserved_gpa_bits to calculate reserved PxE bits Use reserved_gpa_bits, which accounts for exceptions to the maxphyaddr rule, e.g. SEV's C-bit, for the page {table,directory,etc...} entry (PxE) reserved bits checks. For SEV, the C-bit is ignored by hardware when walking pages tables, e.g. the APM states: Note that while the guest may choose to set the C-bit explicitly on instruction pages and page table addresses, the value of this bit is a don't-care in such situations as hardware always performs these as private accesses. Such behavior is expected to hold true for other features that repurpose GPA bits, e.g. KVM could theoretically emulate SME or MKTME, which both allow non-zero repurposed bits in the page tables. Conceptually, KVM should apply reserved GPA checks universally, and any features that do not adhere to the basic rule should be explicitly handled, i.e. if a GPA bit is repurposed but not allowed in page tables for whatever reason. Refactor __reset_rsvds_bits_mask() to take the pre-generated reserved bits mask, and opportunistically clean up its code, e.g. to align lines and comments. Practically speaking, this is change is a likely a glorified nop given the current KVM code base. SEV's C-bit is the only repurposed GPA bit, and KVM doesn't support shadowing encrypted page tables (which is theoretically possible via SEV debug APIs). Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210204000117.3303214-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-02-04 00:01:13 +00:00
*/
KVM: x86: Force all MMUs to reinitialize if guest CPUID is modified Invalidate all MMUs' roles after a CPUID update to force reinitizliation of the MMU context/helpers. Despite the efforts of commit de3ccd26fafc ("KVM: MMU: record maximum physical address width in kvm_mmu_extended_role"), there are still a handful of CPUID-based properties that affect MMU behavior but are not incorporated into mmu_role. E.g. 1gb hugepage support, AMD vs. Intel handling of bit 8, and SEV's C-Bit location all factor into the guest's reserved PTE bits. The obvious alternative would be to add all such properties to mmu_role, but doing so provides no benefit over simply forcing a reinitialization on every CPUID update, as setting guest CPUID is a rare operation. Note, reinitializing all MMUs after a CPUID update does not fix all of KVM's woes. Specifically, kvm_mmu_page_role doesn't track the CPUID properties, which means that a vCPU can reuse shadow pages that should not exist for the new vCPU model, e.g. that map GPAs that are now illegal (due to MAXPHYADDR changes) or that set bits that are now reserved (PAGE_SIZE for 1gb pages), etc... Tracking the relevant CPUID properties in kvm_mmu_page_role would address the majority of problems, but fully tracking that much state in the shadow page role comes with an unpalatable cost as it would require a non-trivial increase in KVM's memory footprint. The GBPAGES case is even worse, as neither Intel nor AMD provides a way to disable 1gb hugepage support in the hardware page walker, i.e. it's a virtualization hole that can't be closed when using TDP. In other words, resetting the MMU after a CPUID update is largely a superficial fix. But, it will allow reverting the tracking of MAXPHYADDR in the mmu_role, and that case in particular needs to mostly work because KVM's shadow_root_level depends on guest MAXPHYADDR when 5-level paging is supported. For cases where KVM botches guest behavior, the damage is limited to that guest. But for the shadow_root_level, a misconfigured MMU can cause KVM to incorrectly access memory, e.g. due to walking off the end of its shadow page tables. Fixes: 7dcd57552008 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Cc: Yu Zhang <yu.c.zhang@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210622175739.3610207-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-22 17:56:51 +00:00
kvm_mmu_after_set_cpuid(vcpu);
}
int cpuid_query_maxphyaddr(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
best = kvm_find_cpuid_entry(vcpu, 0x80000000, 0);
if (!best || best->eax < 0x80000008)
goto not_found;
best = kvm_find_cpuid_entry(vcpu, 0x80000008, 0);
if (best)
return best->eax & 0xff;
not_found:
return 36;
}
/*
* This "raw" version returns the reserved GPA bits without any adjustments for
* encryption technologies that usurp bits. The raw mask should be used if and
* only if hardware does _not_ strip the usurped bits, e.g. in virtual MTRRs.
*/
u64 kvm_vcpu_reserved_gpa_bits_raw(struct kvm_vcpu *vcpu)
{
return rsvd_bits(cpuid_maxphyaddr(vcpu), 63);
}
static int kvm_set_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid_entry2 *e2,
int nent)
{
int r;
__kvm_update_cpuid_runtime(vcpu, e2, nent);
/*
* KVM does not correctly handle changing guest CPUID after KVM_RUN, as
* MAXPHYADDR, GBPAGES support, AMD reserved bit behavior, etc.. aren't
* tracked in kvm_mmu_page_role. As a result, KVM may miss guest page
* faults due to reusing SPs/SPTEs. In practice no sane VMM mucks with
* the core vCPU model on the fly. It would've been better to forbid any
* KVM_SET_CPUID{,2} calls after KVM_RUN altogether but unfortunately
* some VMMs (e.g. QEMU) reuse vCPU fds for CPU hotplug/unplug and do
* KVM_SET_CPUID{,2} again. To support this legacy behavior, check
* whether the supplied CPUID data is equal to what's already set.
*/
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2} Free the "struct kvm_cpuid_entry2" array on successful post-KVM_RUN KVM_SET_CPUID{,2} to fix a memory leak, the callers of kvm_set_cpuid() free the array only on failure. BUG: memory leak unreferenced object 0xffff88810963a800 (size 2048): comm "syz-executor025", pid 3610, jiffies 4294944928 (age 8.080s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 0d 00 00 00 ................ 47 65 6e 75 6e 74 65 6c 69 6e 65 49 00 00 00 00 GenuntelineI.... backtrace: [<ffffffff814948ee>] kmalloc_node include/linux/slab.h:604 [inline] [<ffffffff814948ee>] kvmalloc_node+0x3e/0x100 mm/util.c:580 [<ffffffff814950f2>] kvmalloc include/linux/slab.h:732 [inline] [<ffffffff814950f2>] vmemdup_user+0x22/0x100 mm/util.c:199 [<ffffffff8109f5ff>] kvm_vcpu_ioctl_set_cpuid2+0x8f/0xf0 arch/x86/kvm/cpuid.c:423 [<ffffffff810711b9>] kvm_arch_vcpu_ioctl+0xb99/0x1e60 arch/x86/kvm/x86.c:5251 [<ffffffff8103e92d>] kvm_vcpu_ioctl+0x4ad/0x950 arch/x86/kvm/../../../virt/kvm/kvm_main.c:4066 [<ffffffff815afacc>] vfs_ioctl fs/ioctl.c:51 [inline] [<ffffffff815afacc>] __do_sys_ioctl fs/ioctl.c:874 [inline] [<ffffffff815afacc>] __se_sys_ioctl fs/ioctl.c:860 [inline] [<ffffffff815afacc>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:860 [<ffffffff844a3335>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff844a3335>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c6617c61e8fe ("KVM: x86: Partially allow KVM_SET_CPUID{,2} after KVM_RUN") Cc: stable@vger.kernel.org Reported-by: syzbot+be576ad7655690586eec@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220125210445.2053429-1-seanjc@google.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-01-25 21:04:45 +00:00
if (vcpu->arch.last_vmentry_cpu != -1) {
r = kvm_cpuid_check_equal(vcpu, e2, nent);
if (r)
return r;
kvfree(e2);
return 0;
}
r = kvm_check_cpuid(vcpu, e2, nent);
if (r)
return r;
kvfree(vcpu->arch.cpuid_entries);
vcpu->arch.cpuid_entries = e2;
vcpu->arch.cpuid_nent = nent;
kvm_update_kvm_cpuid_base(vcpu);
kvm_vcpu_after_set_cpuid(vcpu);
return 0;
}
/* when an old userspace process fills a new kernel module */
int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
struct kvm_cpuid *cpuid,
struct kvm_cpuid_entry __user *entries)
{
int r, i;
struct kvm_cpuid_entry *e = NULL;
struct kvm_cpuid_entry2 *e2 = NULL;
if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
return -E2BIG;
if (cpuid->nent) {
e = vmemdup_user(entries, array_size(sizeof(*e), cpuid->nent));
if (IS_ERR(e))
return PTR_ERR(e);
e2 = kvmalloc_array(cpuid->nent, sizeof(*e2), GFP_KERNEL_ACCOUNT);
if (!e2) {
r = -ENOMEM;
goto out_free_cpuid;
}
}
for (i = 0; i < cpuid->nent; i++) {
e2[i].function = e[i].function;
e2[i].eax = e[i].eax;
e2[i].ebx = e[i].ebx;
e2[i].ecx = e[i].ecx;
e2[i].edx = e[i].edx;
e2[i].index = 0;
e2[i].flags = 0;
e2[i].padding[0] = 0;
e2[i].padding[1] = 0;
e2[i].padding[2] = 0;
}
r = kvm_set_cpuid(vcpu, e2, cpuid->nent);
if (r)
kvfree(e2);
out_free_cpuid:
kvfree(e);
return r;
}
int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries)
{
struct kvm_cpuid_entry2 *e2 = NULL;
int r;
if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
return -E2BIG;
if (cpuid->nent) {
e2 = vmemdup_user(entries, array_size(sizeof(*e2), cpuid->nent));
if (IS_ERR(e2))
return PTR_ERR(e2);
}
r = kvm_set_cpuid(vcpu, e2, cpuid->nent);
if (r)
kvfree(e2);
return r;
}
int kvm_vcpu_ioctl_get_cpuid2(struct kvm_vcpu *vcpu,
struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries)
{
int r;
r = -E2BIG;
if (cpuid->nent < vcpu->arch.cpuid_nent)
goto out;
r = -EFAULT;
if (copy_to_user(entries, vcpu->arch.cpuid_entries,
vcpu->arch.cpuid_nent * sizeof(struct kvm_cpuid_entry2)))
goto out;
return 0;
out:
cpuid->nent = vcpu->arch.cpuid_nent;
return r;
}
/* Mask kvm_cpu_caps for @leaf with the raw CPUID capabilities of this CPU. */
static __always_inline void __kvm_cpu_cap_mask(unsigned int leaf)
{
const struct cpuid_reg cpuid = x86_feature_cpuid(leaf * 32);
struct kvm_cpuid_entry2 entry;
reverse_cpuid_check(leaf);
cpuid_count(cpuid.function, cpuid.index,
&entry.eax, &entry.ebx, &entry.ecx, &entry.edx);
kvm_cpu_caps[leaf] &= *__cpuid_entry_get_reg(&entry, cpuid.reg);
}
static __always_inline
void kvm_cpu_cap_init_scattered(enum kvm_only_cpuid_leafs leaf, u32 mask)
{
/* Use kvm_cpu_cap_mask for non-scattered leafs. */
BUILD_BUG_ON(leaf < NCAPINTS);
kvm_cpu_caps[leaf] = mask;
__kvm_cpu_cap_mask(leaf);
}
static __always_inline void kvm_cpu_cap_mask(enum cpuid_leafs leaf, u32 mask)
{
/* Use kvm_cpu_cap_init_scattered for scattered leafs. */
BUILD_BUG_ON(leaf >= NCAPINTS);
kvm_cpu_caps[leaf] &= mask;
__kvm_cpu_cap_mask(leaf);
}
void kvm_set_cpu_caps(void)
{
#ifdef CONFIG_X86_64
unsigned int f_gbpages = F(GBPAGES);
unsigned int f_lm = F(LM);
unsigned int f_xfd = F(XFD);
#else
unsigned int f_gbpages = 0;
unsigned int f_lm = 0;
unsigned int f_xfd = 0;
#endif
memset(kvm_cpu_caps, 0, sizeof(kvm_cpu_caps));
BUILD_BUG_ON(sizeof(kvm_cpu_caps) - (NKVMCAPINTS * sizeof(*kvm_cpu_caps)) >
sizeof(boot_cpu_data.x86_capability));
memcpy(&kvm_cpu_caps, &boot_cpu_data.x86_capability,
sizeof(kvm_cpu_caps) - (NKVMCAPINTS * sizeof(*kvm_cpu_caps)));
kvm_cpu_cap_mask(CPUID_1_ECX,
/*
* NOTE: MONITOR (and MWAIT) are emulated as NOP, but *not*
* advertised to guests via CPUID!
*/
F(XMM3) | F(PCLMULQDQ) | 0 /* DTES64, MONITOR */ |
0 /* DS-CPL, VMX, SMX, EST */ |
0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
F(FMA) | F(CX16) | 0 /* xTPR Update */ | F(PDCM) |
F(PCID) | 0 /* Reserved, DCA */ | F(XMM4_1) |
F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) |
0 /* Reserved*/ | F(AES) | F(XSAVE) | 0 /* OSXSAVE */ | F(AVX) |
F(F16C) | F(RDRAND)
);
/* KVM emulates x2apic in software irrespective of host support. */
kvm_cpu_cap_set(X86_FEATURE_X2APIC);
kvm_cpu_cap_mask(CPUID_1_EDX,
F(FPU) | F(VME) | F(DE) | F(PSE) |
F(TSC) | F(MSR) | F(PAE) | F(MCE) |
F(CX8) | F(APIC) | 0 /* Reserved */ | F(SEP) |
F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
F(PAT) | F(PSE36) | 0 /* PSN */ | F(CLFLUSH) |
0 /* Reserved, DS, ACPI */ | F(MMX) |
F(FXSR) | F(XMM) | F(XMM2) | F(SELFSNOOP) |
0 /* HTT, TM, Reserved, PBE */
);
kvm_cpu_cap_mask(CPUID_7_0_EBX,
F(FSGSBASE) | F(SGX) | F(BMI1) | F(HLE) | F(AVX2) |
F(FDP_EXCPTN_ONLY) | F(SMEP) | F(BMI2) | F(ERMS) | F(INVPCID) |
F(RTM) | F(ZERO_FCS_FDS) | 0 /*MPX*/ | F(AVX512F) |
F(AVX512DQ) | F(RDSEED) | F(ADX) | F(SMAP) | F(AVX512IFMA) |
F(CLFLUSHOPT) | F(CLWB) | 0 /*INTEL_PT*/ | F(AVX512PF) |
F(AVX512ER) | F(AVX512CD) | F(SHA_NI) | F(AVX512BW) |
F(AVX512VL));
kvm_cpu_cap_mask(CPUID_7_ECX,
F(AVX512VBMI) | F(LA57) | F(PKU) | 0 /*OSPKE*/ | F(RDPID) |
F(AVX512_VPOPCNTDQ) | F(UMIP) | F(AVX512_VBMI2) | F(GFNI) |
F(VAES) | F(VPCLMULQDQ) | F(AVX512_VNNI) | F(AVX512_BITALG) |
F(CLDEMOTE) | F(MOVDIRI) | F(MOVDIR64B) | 0 /*WAITPKG*/ |
F(SGX_LC) | F(BUS_LOCK_DETECT)
);
/* Set LA57 based on hardware capability. */
if (cpuid_ecx(7) & F(LA57))
kvm_cpu_cap_set(X86_FEATURE_LA57);
/*
* PKU not yet implemented for shadow paging and requires OSPKE
* to be set on the host. Clear it if that is not the case
*/
if (!tdp_enabled || !boot_cpu_has(X86_FEATURE_OSPKE))
kvm_cpu_cap_clear(X86_FEATURE_PKU);
kvm_cpu_cap_mask(CPUID_7_EDX,
F(AVX512_4VNNIW) | F(AVX512_4FMAPS) | F(SPEC_CTRL) |
F(SPEC_CTRL_SSBD) | F(ARCH_CAPABILITIES) | F(INTEL_STIBP) |
F(MD_CLEAR) | F(AVX512_VP2INTERSECT) | F(FSRM) |
F(SERIALIZE) | F(TSXLDTRK) | F(AVX512_FP16) |
F(AMX_TILE) | F(AMX_INT8) | F(AMX_BF16)
);
/* TSC_ADJUST and ARCH_CAPABILITIES are emulated in software. */
kvm_cpu_cap_set(X86_FEATURE_TSC_ADJUST);
kvm_cpu_cap_set(X86_FEATURE_ARCH_CAPABILITIES);
if (boot_cpu_has(X86_FEATURE_IBPB) && boot_cpu_has(X86_FEATURE_IBRS))
kvm_cpu_cap_set(X86_FEATURE_SPEC_CTRL);
if (boot_cpu_has(X86_FEATURE_STIBP))
kvm_cpu_cap_set(X86_FEATURE_INTEL_STIBP);
if (boot_cpu_has(X86_FEATURE_AMD_SSBD))
kvm_cpu_cap_set(X86_FEATURE_SPEC_CTRL_SSBD);
kvm_cpu_cap_mask(CPUID_7_1_EAX,
F(AVX_VNNI) | F(AVX512_BF16)
);
kvm_cpu_cap_mask(CPUID_D_1_EAX,
F(XSAVEOPT) | F(XSAVEC) | F(XGETBV1) | F(XSAVES) | f_xfd
);
kvm_cpu_cap_init_scattered(CPUID_12_EAX,
SF(SGX1) | SF(SGX2)
);
kvm_cpu_cap_mask(CPUID_8000_0001_ECX,
F(LAHF_LM) | F(CMP_LEGACY) | 0 /*SVM*/ | 0 /* ExtApicSpace */ |
F(CR8_LEGACY) | F(ABM) | F(SSE4A) | F(MISALIGNSSE) |
F(3DNOWPREFETCH) | F(OSVW) | 0 /* IBS */ | F(XOP) |
0 /* SKINIT, WDT, LWP */ | F(FMA4) | F(TBM) |
F(TOPOEXT) | 0 /* PERFCTR_CORE */
);
kvm_cpu_cap_mask(CPUID_8000_0001_EDX,
F(FPU) | F(VME) | F(DE) | F(PSE) |
F(TSC) | F(MSR) | F(PAE) | F(MCE) |
F(CX8) | F(APIC) | 0 /* Reserved */ | F(SYSCALL) |
F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
F(PAT) | F(PSE36) | 0 /* Reserved */ |
KVM: x86: Allow guest to set EFER.NX=1 on non-PAE 32-bit kernels Remove an ancient restriction that disallowed exposing EFER.NX to the guest if EFER.NX=0 on the host, even if NX is fully supported by the CPU. The motivation of the check, added by commit 2cc51560aed0 ("KVM: VMX: Avoid saving and restoring msr_efer on lightweight vmexit"), was to rule out the case of host.EFER.NX=0 and guest.EFER.NX=1 so that KVM could run the guest with the host's EFER.NX and thus avoid context switching EFER if the only divergence was the NX bit. Fast forward to today, and KVM has long since stopped running the guest with the host's EFER.NX. Not only does KVM context switch EFER if host.EFER.NX=1 && guest.EFER.NX=0, KVM also forces host.EFER.NX=0 && guest.EFER.NX=1 when using shadow paging (to emulate SMEP). Furthermore, the entire motivation for the restriction was made obsolete over a decade ago when Intel added dedicated host and guest EFER fields in the VMCS (Nehalem timeframe), which reduced the overhead of context switching EFER from 400+ cycles (2 * WRMSR + 1 * RDMSR) to a mere ~2 cycles. In practice, the removed restriction only affects non-PAE 32-bit kernels, as EFER.NX is set during boot if NX is supported and the kernel will use PAE paging (32-bit or 64-bit), regardless of whether or not the kernel will actually use NX itself (mark PTEs non-executable). Alternatively and/or complementarily, startup_32_smp() in head_32.S could be modified to set EFER.NX=1 regardless of paging mode, thus eliminating the scenario where NX is supported but not enabled. However, that runs the risk of breaking non-KVM non-PAE kernels (though the risk is very, very low as there are no known EFER.NX errata), and also eliminates an easy-to-use mechanism for stressing KVM's handling of guest vs. host EFER across nested virtualization transitions. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210805183804.1221554-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-08-05 18:38:04 +00:00
F(NX) | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
F(FXSR) | F(FXSR_OPT) | f_gbpages | F(RDTSCP) |
0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW)
);
if (!tdp_enabled && IS_ENABLED(CONFIG_X86_64))
kvm_cpu_cap_set(X86_FEATURE_GBPAGES);
kvm_cpu_cap_mask(CPUID_8000_0008_EBX,
F(CLZERO) | F(XSAVEERPTR) |
F(WBNOINVD) | F(AMD_IBPB) | F(AMD_IBRS) | F(AMD_SSBD) | F(VIRT_SSBD) |
KVM: x86: Expose Predictive Store Forwarding Disable Predictive Store Forwarding: AMD Zen3 processors feature a new technology called Predictive Store Forwarding (PSF). PSF is a hardware-based micro-architectural optimization designed to improve the performance of code execution by predicting address dependencies between loads and stores. How PSF works: It is very common for a CPU to execute a load instruction to an address that was recently written by a store. Modern CPUs implement a technique known as Store-To-Load-Forwarding (STLF) to improve performance in such cases. With STLF, data from the store is forwarded directly to the load without having to wait for it to be written to memory. In a typical CPU, STLF occurs after the address of both the load and store are calculated and determined to match. PSF expands on this by speculating on the relationship between loads and stores without waiting for the address calculation to complete. With PSF, the CPU learns over time the relationship between loads and stores. If STLF typically occurs between a particular store and load, the CPU will remember this. In typical code, PSF provides a performance benefit by speculating on the load result and allowing later instructions to begin execution sooner than they otherwise would be able to. The details of security analysis of AMD predictive store forwarding is documented here. https://www.amd.com/system/files/documents/security-analysis-predictive-store-forwarding.pdf Predictive Store Forwarding controls: There are two hardware control bits which influence the PSF feature: - MSR 48h bit 2 – Speculative Store Bypass (SSBD) - MSR 48h bit 7 – Predictive Store Forwarding Disable (PSFD) The PSF feature is disabled if either of these bits are set. These bits are controllable on a per-thread basis in an SMT system. By default, both SSBD and PSFD are 0 meaning that the speculation features are enabled. While the SSBD bit disables PSF and speculative store bypass, PSFD only disables PSF. PSFD may be desirable for software which is concerned with the speculative behavior of PSF but desires a smaller performance impact than setting SSBD. Support for PSFD is indicated in CPUID Fn8000_0008 EBX[28]. All processors that support PSF will also support PSFD. Linux kernel does not have the interface to enable/disable PSFD yet. Plan here is to expose the PSFD technology to KVM so that the guest kernel can make use of it if they wish to. Signed-off-by: Babu Moger <Babu.Moger@amd.com> Message-Id: <163244601049.30292.5855870305350227855.stgit@bmoger-ubuntu> [Keep feature private to KVM, as requested by Borislav Petkov. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-09-24 01:15:28 +00:00
F(AMD_SSB_NO) | F(AMD_STIBP) | F(AMD_STIBP_ALWAYS_ON) |
__feature_bit(KVM_X86_FEATURE_PSFD)
);
/*
* AMD has separate bits for each SPEC_CTRL bit.
* arch/x86/kernel/cpu/bugs.c is kind enough to
* record that in cpufeatures so use them.
*/
if (boot_cpu_has(X86_FEATURE_IBPB))
kvm_cpu_cap_set(X86_FEATURE_AMD_IBPB);
if (boot_cpu_has(X86_FEATURE_IBRS))
kvm_cpu_cap_set(X86_FEATURE_AMD_IBRS);
if (boot_cpu_has(X86_FEATURE_STIBP))
kvm_cpu_cap_set(X86_FEATURE_AMD_STIBP);
if (boot_cpu_has(X86_FEATURE_SPEC_CTRL_SSBD))
kvm_cpu_cap_set(X86_FEATURE_AMD_SSBD);
if (!boot_cpu_has_bug(X86_BUG_SPEC_STORE_BYPASS))
kvm_cpu_cap_set(X86_FEATURE_AMD_SSB_NO);
/*
* The preference is to use SPEC CTRL MSR instead of the
* VIRT_SPEC MSR.
*/
if (boot_cpu_has(X86_FEATURE_LS_CFG_SSBD) &&
!boot_cpu_has(X86_FEATURE_AMD_SSBD))
kvm_cpu_cap_set(X86_FEATURE_VIRT_SSBD);
/*
* Hide all SVM features by default, SVM will set the cap bits for
* features it emulates and/or exposes for L1.
*/
kvm_cpu_cap_mask(CPUID_8000_000A_EDX, 0);
kvm_cpu_cap_mask(CPUID_8000_001F_EAX,
0 /* SME */ | F(SEV) | 0 /* VM_PAGE_FLUSH */ | F(SEV_ES) |
F(SME_COHERENT));
kvm_cpu_cap_mask(CPUID_C000_0001_EDX,
F(XSTORE) | F(XSTORE_EN) | F(XCRYPT) | F(XCRYPT_EN) |
F(ACE2) | F(ACE2_EN) | F(PHE) | F(PHE_EN) |
F(PMM) | F(PMM_EN)
);
/*
* Hide RDTSCP and RDPID if either feature is reported as supported but
* probing MSR_TSC_AUX failed. This is purely a sanity check and
* should never happen, but the guest will likely crash if RDTSCP or
* RDPID is misreported, and KVM has botched MSR_TSC_AUX emulation in
* the past. For example, the sanity check may fire if this instance of
* KVM is running as L1 on top of an older, broken KVM.
*/
if (WARN_ON((kvm_cpu_cap_has(X86_FEATURE_RDTSCP) ||
kvm_cpu_cap_has(X86_FEATURE_RDPID)) &&
!kvm_is_supported_user_return_msr(MSR_TSC_AUX))) {
kvm_cpu_cap_clear(X86_FEATURE_RDTSCP);
kvm_cpu_cap_clear(X86_FEATURE_RDPID);
}
}
EXPORT_SYMBOL_GPL(kvm_set_cpu_caps);
struct kvm_cpuid_array {
struct kvm_cpuid_entry2 *entries;
int maxnent;
int nent;
};
static struct kvm_cpuid_entry2 *do_host_cpuid(struct kvm_cpuid_array *array,
u32 function, u32 index)
{
struct kvm_cpuid_entry2 *entry;
if (array->nent >= array->maxnent)
return NULL;
entry = &array->entries[array->nent++];
memset(entry, 0, sizeof(*entry));
entry->function = function;
entry->index = index;
switch (function & 0xC0000000) {
case 0x40000000:
/* Hypervisor leaves are always synthesized by __do_cpuid_func. */
return entry;
case 0x80000000:
/*
* 0x80000021 is sometimes synthesized by __do_cpuid_func, which
* would result in out-of-bounds calls to do_host_cpuid.
*/
{
static int max_cpuid_80000000;
if (!READ_ONCE(max_cpuid_80000000))
WRITE_ONCE(max_cpuid_80000000, cpuid_eax(0x80000000));
if (function > READ_ONCE(max_cpuid_80000000))
return entry;
}
break;
default:
break;
}
cpuid_count(entry->function, entry->index,
&entry->eax, &entry->ebx, &entry->ecx, &entry->edx);
switch (function) {
case 4:
case 7:
case 0xb:
case 0xd:
case 0xf:
case 0x10:
case 0x12:
case 0x14:
case 0x17:
case 0x18:
case 0x1d:
case 0x1e:
case 0x1f:
case 0x8000001d:
entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
break;
}
return entry;
}
static int __do_cpuid_func_emulated(struct kvm_cpuid_array *array, u32 func)
{
struct kvm_cpuid_entry2 *entry;
if (array->nent >= array->maxnent)
return -E2BIG;
entry = &array->entries[array->nent];
entry->function = func;
entry->index = 0;
entry->flags = 0;
switch (func) {
case 0:
entry->eax = 7;
++array->nent;
break;
case 1:
entry->ecx = F(MOVBE);
++array->nent;
break;
case 7:
entry->flags |= KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
entry->eax = 0;
if (kvm_cpu_cap_has(X86_FEATURE_RDTSCP))
entry->ecx = F(RDPID);
++array->nent;
break;
default:
break;
}
return 0;
}
static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
{
struct kvm_cpuid_entry2 *entry;
int r, i, max_idx;
/* all calls to cpuid_count() should be made on the same cpu */
get_cpu();
r = -E2BIG;
entry = do_host_cpuid(array, function, 0);
if (!entry)
goto out;
switch (function) {
case 0:
/* Limited to the highest leaf implemented in KVM. */
entry->eax = min(entry->eax, 0x1fU);
break;
case 1:
cpuid_entry_override(entry, CPUID_1_EDX);
cpuid_entry_override(entry, CPUID_1_ECX);
break;
case 2:
KVM: x86: Squash CPUID 0x2.0 insanity for modern CPUs Rework CPUID 0x2.0 to be a normal CPUID leaf if it returns "01" in AL, i.e. EAX & 0xff, as a step towards removing KVM's stateful CPUID code altogether. Long ago, Intel documented CPUID 0x2.0 as being a stateful leaf, e.g. a version of the SDM circa 1995 states: The least-significant byte in register EAX (register AL) indicates the number of times the CPUID instruction must be executed with an input value of 2 to get a complete description of the processors's caches and TLBs. The Pentium Pro family of processors will return a 1. A 2000 version of the SDM only updated the paragraph to reference Intel's new processory family: The first member of the family of Pentium 4 processors will return a 1. Fast forward to the present, and Intel's SDM now states: The least-significant byte in register EAX (register AL) will always return 01H. Software should ignore this value and not interpret it as an information descriptor. AMD's APM simply states that CPUID 0x2 is reserved. Given that CPUID itself was introduced in the Pentium, odds are good that the only Intel CPU family that *maybe* implemented a stateful CPUID was the P5. Which obviously did not support VMX, or KVM. In other words, KVM's emulation of a stateful CPUID 0x2.0 has likely been dead code from the day it was introduced. This is backed up by commit 0fdf8e59faa5c ("KVM: Fix cpuid iteration on multiple leaves per eac"), which shows that the stateful iteration code was completely broken when it was introduced by commit 0771671749b59 ("KVM: Enhance guest cpuid management"), i.e. not actually tested. Annotate all stateful code paths as "unlikely", but defer its removal to a future patch to simplify reinstating the code if by some miracle there is someone running KVM on a CPU with a stateful CPUID 0x2. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-02 23:56:50 +00:00
/*
* On ancient CPUs, function 2 entries are STATEFUL. That is,
* CPUID(function=2, index=0) may return different results each
* time, with the least-significant byte in EAX enumerating the
* number of times software should do CPUID(2, 0).
*
* Modern CPUs, i.e. every CPU KVM has *ever* run on are less
* idiotic. Intel's SDM states that EAX & 0xff "will always
* return 01H. Software should ignore this value and not
KVM: x86: Squash CPUID 0x2.0 insanity for modern CPUs Rework CPUID 0x2.0 to be a normal CPUID leaf if it returns "01" in AL, i.e. EAX & 0xff, as a step towards removing KVM's stateful CPUID code altogether. Long ago, Intel documented CPUID 0x2.0 as being a stateful leaf, e.g. a version of the SDM circa 1995 states: The least-significant byte in register EAX (register AL) indicates the number of times the CPUID instruction must be executed with an input value of 2 to get a complete description of the processors's caches and TLBs. The Pentium Pro family of processors will return a 1. A 2000 version of the SDM only updated the paragraph to reference Intel's new processory family: The first member of the family of Pentium 4 processors will return a 1. Fast forward to the present, and Intel's SDM now states: The least-significant byte in register EAX (register AL) will always return 01H. Software should ignore this value and not interpret it as an information descriptor. AMD's APM simply states that CPUID 0x2 is reserved. Given that CPUID itself was introduced in the Pentium, odds are good that the only Intel CPU family that *maybe* implemented a stateful CPUID was the P5. Which obviously did not support VMX, or KVM. In other words, KVM's emulation of a stateful CPUID 0x2.0 has likely been dead code from the day it was introduced. This is backed up by commit 0fdf8e59faa5c ("KVM: Fix cpuid iteration on multiple leaves per eac"), which shows that the stateful iteration code was completely broken when it was introduced by commit 0771671749b59 ("KVM: Enhance guest cpuid management"), i.e. not actually tested. Annotate all stateful code paths as "unlikely", but defer its removal to a future patch to simplify reinstating the code if by some miracle there is someone running KVM on a CPU with a stateful CPUID 0x2. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-02 23:56:50 +00:00
* interpret it as an informational descriptor", while AMD's
* APM states that CPUID(2) is reserved.
*
* WARN if a frankenstein CPU that supports virtualization and
* a stateful CPUID.0x2 is encountered.
KVM: x86: Squash CPUID 0x2.0 insanity for modern CPUs Rework CPUID 0x2.0 to be a normal CPUID leaf if it returns "01" in AL, i.e. EAX & 0xff, as a step towards removing KVM's stateful CPUID code altogether. Long ago, Intel documented CPUID 0x2.0 as being a stateful leaf, e.g. a version of the SDM circa 1995 states: The least-significant byte in register EAX (register AL) indicates the number of times the CPUID instruction must be executed with an input value of 2 to get a complete description of the processors's caches and TLBs. The Pentium Pro family of processors will return a 1. A 2000 version of the SDM only updated the paragraph to reference Intel's new processory family: The first member of the family of Pentium 4 processors will return a 1. Fast forward to the present, and Intel's SDM now states: The least-significant byte in register EAX (register AL) will always return 01H. Software should ignore this value and not interpret it as an information descriptor. AMD's APM simply states that CPUID 0x2 is reserved. Given that CPUID itself was introduced in the Pentium, odds are good that the only Intel CPU family that *maybe* implemented a stateful CPUID was the P5. Which obviously did not support VMX, or KVM. In other words, KVM's emulation of a stateful CPUID 0x2.0 has likely been dead code from the day it was introduced. This is backed up by commit 0fdf8e59faa5c ("KVM: Fix cpuid iteration on multiple leaves per eac"), which shows that the stateful iteration code was completely broken when it was introduced by commit 0771671749b59 ("KVM: Enhance guest cpuid management"), i.e. not actually tested. Annotate all stateful code paths as "unlikely", but defer its removal to a future patch to simplify reinstating the code if by some miracle there is someone running KVM on a CPU with a stateful CPUID 0x2. Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-02 23:56:50 +00:00
*/
WARN_ON_ONCE((entry->eax & 0xff) > 1);
break;
/* functions 4 and 0x8000001d have additional index. */
case 4:
case 0x8000001d:
/*
* Read entries until the cache type in the previous entry is
* zero, i.e. indicates an invalid entry.
*/
for (i = 1; entry->eax & 0x1f; ++i) {
entry = do_host_cpuid(array, function, i);
if (!entry)
goto out;
}
break;
case 6: /* Thermal management */
entry->eax = 0x4; /* allow ARAT */
entry->ebx = 0;
entry->ecx = 0;
entry->edx = 0;
break;
/* function 7 has additional index. */
case 7:
entry->eax = min(entry->eax, 1u);
cpuid_entry_override(entry, CPUID_7_0_EBX);
cpuid_entry_override(entry, CPUID_7_ECX);
cpuid_entry_override(entry, CPUID_7_EDX);
/* KVM only supports 0x7.0 and 0x7.1, capped above via min(). */
if (entry->eax == 1) {
entry = do_host_cpuid(array, function, 1);
if (!entry)
goto out;
cpuid_entry_override(entry, CPUID_7_1_EAX);
entry->ebx = 0;
entry->ecx = 0;
entry->edx = 0;
}
break;
case 9:
break;
case 0xa: { /* Architectural Performance Monitoring */
struct x86_pmu_capability cap;
union cpuid10_eax eax;
union cpuid10_edx edx;
perf_get_x86_pmu_capability(&cap);
/*
* The guest architecture pmu is only supported if the architecture
* pmu exists on the host and the module parameters allow it.
*/
if (!cap.version || !enable_pmu)
memset(&cap, 0, sizeof(cap));
eax.split.version_id = min(cap.version, 2);
eax.split.num_counters = cap.num_counters_gp;
eax.split.bit_width = cap.bit_width_gp;
eax.split.mask_length = cap.events_mask_len;
edx.split.num_counters_fixed =
min(cap.num_counters_fixed, KVM_PMC_MAX_FIXED);
edx.split.bit_width_fixed = cap.bit_width_fixed;
if (cap.version)
edx.split.anythread_deprecated = 1;
edx.split.reserved1 = 0;
edx.split.reserved2 = 0;
entry->eax = eax.full;
entry->ebx = cap.events_mask;
entry->ecx = 0;
entry->edx = edx.full;
break;
}
/*
* Per Intel's SDM, the 0x1f is a superset of 0xb,
* thus they can be handled by common code.
*/
case 0x1f:
case 0xb:
/*
* Populate entries until the level type (ECX[15:8]) of the
* previous entry is zero. Note, CPUID EAX.{0x1f,0xb}.0 is
* the starting entry, filled by the primary do_host_cpuid().
*/
for (i = 1; entry->ecx & 0xff00; ++i) {
entry = do_host_cpuid(array, function, i);
if (!entry)
goto out;
}
break;
case 0xd: {
u64 permitted_xcr0 = supported_xcr0 & xstate_get_guest_group_perm();
u64 permitted_xss = supported_xss;
entry->eax &= permitted_xcr0;
entry->ebx = xstate_required_size(permitted_xcr0, false);
entry->ecx = entry->ebx;
entry->edx &= permitted_xcr0 >> 32;
if (!permitted_xcr0)
break;
entry = do_host_cpuid(array, function, 1);
if (!entry)
goto out;
cpuid_entry_override(entry, CPUID_D_1_EAX);
if (entry->eax & (F(XSAVES)|F(XSAVEC)))
entry->ebx = xstate_required_size(permitted_xcr0 | permitted_xss,
true);
else {
WARN_ON_ONCE(permitted_xss != 0);
entry->ebx = 0;
}
entry->ecx &= permitted_xss;
entry->edx &= permitted_xss >> 32;
for (i = 2; i < 64; ++i) {
bool s_state;
if (permitted_xcr0 & BIT_ULL(i))
s_state = false;
else if (permitted_xss & BIT_ULL(i))
s_state = true;
else
continue;
entry = do_host_cpuid(array, function, i);
if (!entry)
goto out;
/*
* The supported check above should have filtered out
* invalid sub-leafs. Only valid sub-leafs should
* reach this point, and they should have a non-zero
* save state size. Furthermore, check whether the
* processor agrees with permitted_xcr0/permitted_xss
* on whether this is an XCR0- or IA32_XSS-managed area.
*/
if (WARN_ON_ONCE(!entry->eax || (entry->ecx & 0x1) != s_state)) {
--array->nent;
continue;
}
if (!kvm_cpu_cap_has(X86_FEATURE_XFD))
entry->ecx &= ~BIT_ULL(2);
entry->edx = 0;
}
break;
}
case 0x12:
/* Intel SGX */
if (!kvm_cpu_cap_has(X86_FEATURE_SGX)) {
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
break;
}
/*
* Index 0: Sub-features, MISCSELECT (a.k.a extended features)
* and max enclave sizes. The SGX sub-features and MISCSELECT
* are restricted by kernel and KVM capabilities (like most
* feature flags), while enclave size is unrestricted.
*/
cpuid_entry_override(entry, CPUID_12_EAX);
entry->ebx &= SGX_MISC_EXINFO;
entry = do_host_cpuid(array, function, 1);
if (!entry)
goto out;
/*
* Index 1: SECS.ATTRIBUTES. ATTRIBUTES are restricted a la
* feature flags. Advertise all supported flags, including
* privileged attributes that require explicit opt-in from
* userspace. ATTRIBUTES.XFRM is not adjusted as userspace is
* expected to derive it from supported XCR0.
*/
entry->eax &= SGX_ATTR_DEBUG | SGX_ATTR_MODE64BIT |
SGX_ATTR_PROVISIONKEY | SGX_ATTR_EINITTOKENKEY |
SGX_ATTR_KSS;
entry->ebx &= 0;
break;
/* Intel PT */
case 0x14:
if (!kvm_cpu_cap_has(X86_FEATURE_INTEL_PT)) {
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
break;
}
for (i = 1, max_idx = entry->eax; i <= max_idx; ++i) {
if (!do_host_cpuid(array, function, i))
goto out;
}
break;
/* Intel AMX TILE */
case 0x1d:
if (!kvm_cpu_cap_has(X86_FEATURE_AMX_TILE)) {
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
break;
}
for (i = 1, max_idx = entry->eax; i <= max_idx; ++i) {
if (!do_host_cpuid(array, function, i))
goto out;
}
break;
case 0x1e: /* TMUL information */
if (!kvm_cpu_cap_has(X86_FEATURE_AMX_TILE)) {
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
break;
}
break;
case KVM_CPUID_SIGNATURE: {
const u32 *sigptr = (const u32 *)KVM_SIGNATURE;
entry->eax = KVM_CPUID_FEATURES;
entry->ebx = sigptr[0];
entry->ecx = sigptr[1];
entry->edx = sigptr[2];
break;
}
case KVM_CPUID_FEATURES:
entry->eax = (1 << KVM_FEATURE_CLOCKSOURCE) |
(1 << KVM_FEATURE_NOP_IO_DELAY) |
(1 << KVM_FEATURE_CLOCKSOURCE2) |
(1 << KVM_FEATURE_ASYNC_PF) |
(1 << KVM_FEATURE_PV_EOI) |
(1 << KVM_FEATURE_CLOCKSOURCE_STABLE_BIT) |
(1 << KVM_FEATURE_PV_UNHALT) |
(1 << KVM_FEATURE_PV_TLB_FLUSH) |
KVM: X86: Implement "send IPI" hypercall Using hypercall to send IPIs by one vmexit instead of one by one for xAPIC/x2APIC physical mode and one vmexit per-cluster for x2APIC cluster mode. Intel guest can enter x2apic cluster mode when interrupt remmaping is enabled in qemu, however, latest AMD EPYC still just supports xapic mode which can get great improvement by Exit-less IPIs. This patchset lets a guest send multicast IPIs, with at most 128 destinations per hypercall in 64-bit mode and 64 vCPUs per hypercall in 32-bit mode. Hardware: Xeon Skylake 2.5GHz, 2 sockets, 40 cores, 80 threads, the VM is 80 vCPUs, IPI microbenchmark(https://lkml.org/lkml/2017/12/19/141): x2apic cluster mode, vanilla Dry-run: 0, 2392199 ns Self-IPI: 6907514, 15027589 ns Normal IPI: 223910476, 251301666 ns Broadcast IPI: 0, 9282161150 ns Broadcast lock: 0, 8812934104 ns x2apic cluster mode, pv-ipi Dry-run: 0, 2449341 ns Self-IPI: 6720360, 15028732 ns Normal IPI: 228643307, 255708477 ns Broadcast IPI: 0, 7572293590 ns => 22% performance boost Broadcast lock: 0, 8316124651 ns x2apic physical mode, vanilla Dry-run: 0, 3135933 ns Self-IPI: 8572670, 17901757 ns Normal IPI: 226444334, 255421709 ns Broadcast IPI: 0, 19845070887 ns Broadcast lock: 0, 19827383656 ns x2apic physical mode, pv-ipi Dry-run: 0, 2446381 ns Self-IPI: 6788217, 15021056 ns Normal IPI: 219454441, 249583458 ns Broadcast IPI: 0, 7806540019 ns => 154% performance boost Broadcast lock: 0, 9143618799 ns Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-23 06:39:54 +00:00
(1 << KVM_FEATURE_ASYNC_PF_VMEXIT) |
(1 << KVM_FEATURE_PV_SEND_IPI) |
(1 << KVM_FEATURE_POLL_CONTROL) |
(1 << KVM_FEATURE_PV_SCHED_YIELD) |
(1 << KVM_FEATURE_ASYNC_PF_INT);
if (sched_info_on())
entry->eax |= (1 << KVM_FEATURE_STEAL_TIME);
entry->ebx = 0;
entry->ecx = 0;
entry->edx = 0;
break;
case 0x80000000:
entry->eax = min(entry->eax, 0x80000021);
/*
* Serializing LFENCE is reported in a multitude of ways,
* and NullSegClearsBase is not reported in CPUID on Zen2;
* help userspace by providing the CPUID leaf ourselves.
*/
if (static_cpu_has(X86_FEATURE_LFENCE_RDTSC)
|| !static_cpu_has_bug(X86_BUG_NULL_SEG))
entry->eax = max(entry->eax, 0x80000021);
break;
case 0x80000001:
cpuid_entry_override(entry, CPUID_8000_0001_EDX);
cpuid_entry_override(entry, CPUID_8000_0001_ECX);
break;
case 0x80000006:
/* L2 cache and TLB: pass through host info. */
break;
case 0x80000007: /* Advanced power management */
/* invariant TSC is CPUID.80000007H:EDX[8] */
entry->edx &= (1 << 8);
/* mask against host */
entry->edx &= boot_cpu_data.x86_power;
entry->eax = entry->ebx = entry->ecx = 0;
break;
case 0x80000008: {
unsigned g_phys_as = (entry->eax >> 16) & 0xff;
unsigned virt_as = max((entry->eax >> 8) & 0xff, 48U);
unsigned phys_as = entry->eax & 0xff;
/*
* If TDP (NPT) is disabled use the adjusted host MAXPHYADDR as
* the guest operates in the same PA space as the host, i.e.
* reductions in MAXPHYADDR for memory encryption affect shadow
* paging, too.
*
* If TDP is enabled but an explicit guest MAXPHYADDR is not
* provided, use the raw bare metal MAXPHYADDR as reductions to
* the HPAs do not affect GPAs.
*/
if (!tdp_enabled)
g_phys_as = boot_cpu_data.x86_phys_bits;
else if (!g_phys_as)
g_phys_as = phys_as;
entry->eax = g_phys_as | (virt_as << 8);
KVM/x86: Add IBPB support The Indirect Branch Predictor Barrier (IBPB) is an indirect branch control mechanism. It keeps earlier branches from influencing later ones. Unlike IBRS and STIBP, IBPB does not define a new mode of operation. It's a command that ensures predicted branch targets aren't used after the barrier. Although IBRS and IBPB are enumerated by the same CPUID enumeration, IBPB is very different. IBPB helps mitigate against three potential attacks: * Mitigate guests from being attacked by other guests. - This is addressed by issing IBPB when we do a guest switch. * Mitigate attacks from guest/ring3->host/ring3. These would require a IBPB during context switch in host, or after VMEXIT. The host process has two ways to mitigate - Either it can be compiled with retpoline - If its going through context switch, and has set !dumpable then there is a IBPB in that path. (Tim's patch: https://patchwork.kernel.org/patch/10192871) - The case where after a VMEXIT you return back to Qemu might make Qemu attackable from guest when Qemu isn't compiled with retpoline. There are issues reported when doing IBPB on every VMEXIT that resulted in some tsc calibration woes in guest. * Mitigate guest/ring0->host/ring0 attacks. When host kernel is using retpoline it is safe against these attacks. If host kernel isn't using retpoline we might need to do a IBPB flush on every VMEXIT. Even when using retpoline for indirect calls, in certain conditions 'ret' can use the BTB on Skylake-era CPUs. There are other mitigations available like RSB stuffing/clearing. * IBPB is issued only for SVM during svm_free_vcpu(). VMX has a vmclear and SVM doesn't. Follow discussion here: https://lkml.org/lkml/2018/1/15/146 Please refer to the following spec for more details on the enumeration and control. Refer here to get documentation about mitigations. https://software.intel.com/en-us/side-channel-security-support [peterz: rebase and changelog rewrite] [karahmed: - rebase - vmx: expose PRED_CMD if guest has it in CPUID - svm: only pass through IBPB if guest has it in CPUID - vmx: support !cpu_has_vmx_msr_bitmap()] - vmx: support nested] [dwmw2: Expose CPUID bit too (AMD IBPB only for now as we lack IBRS) PRED_CMD is a write-only MSR] Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: kvm@vger.kernel.org Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Arjan Van De Ven <arjan.van.de.ven@intel.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Jun Nakajima <jun.nakajima@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Link: http://lkml.kernel.org/r/1515720739-43819-6-git-send-email-ashok.raj@intel.com Link: https://lkml.kernel.org/r/1517522386-18410-3-git-send-email-karahmed@amazon.de
2018-02-01 21:59:43 +00:00
entry->edx = 0;
cpuid_entry_override(entry, CPUID_8000_0008_EBX);
break;
}
case 0x8000000A:
if (!kvm_cpu_cap_has(X86_FEATURE_SVM)) {
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
break;
}
entry->eax = 1; /* SVM revision 1 */
entry->ebx = 8; /* Lets support 8 ASIDs in case we add proper
ASID emulation to nested SVM */
entry->ecx = 0; /* Reserved */
cpuid_entry_override(entry, CPUID_8000_000A_EDX);
break;
case 0x80000019:
entry->ecx = entry->edx = 0;
break;
case 0x8000001a:
case 0x8000001e:
break;
case 0x8000001F:
if (!kvm_cpu_cap_has(X86_FEATURE_SEV)) {
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
} else {
cpuid_entry_override(entry, CPUID_8000_001F_EAX);
/*
* Enumerate '0' for "PA bits reduction", the adjusted
* MAXPHYADDR is enumerated directly (see 0x80000008).
*/
entry->ebx &= ~GENMASK(11, 6);
}
break;
case 0x80000020:
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
break;
case 0x80000021:
entry->ebx = entry->ecx = entry->edx = 0;
/*
* Pass down these bits:
* EAX 0 NNDBP, Processor ignores nested data breakpoints
* EAX 2 LAS, LFENCE always serializing
* EAX 6 NSCB, Null selector clear base
*
* Other defined bits are for MSRs that KVM does not expose:
* EAX 3 SPCL, SMM page configuration lock
* EAX 13 PCMSR, Prefetch control MSR
*/
entry->eax &= BIT(0) | BIT(2) | BIT(6);
if (static_cpu_has(X86_FEATURE_LFENCE_RDTSC))
entry->eax |= BIT(2);
if (!static_cpu_has_bug(X86_BUG_NULL_SEG))
entry->eax |= BIT(6);
break;
/*Add support for Centaur's CPUID instruction*/
case 0xC0000000:
/*Just support up to 0xC0000004 now*/
entry->eax = min(entry->eax, 0xC0000004);
break;
case 0xC0000001:
cpuid_entry_override(entry, CPUID_C000_0001_EDX);
break;
case 3: /* Processor serial number */
case 5: /* MONITOR/MWAIT */
case 0xC0000002:
case 0xC0000003:
case 0xC0000004:
default:
entry->eax = entry->ebx = entry->ecx = entry->edx = 0;
break;
}
r = 0;
out:
put_cpu();
return r;
}
static int do_cpuid_func(struct kvm_cpuid_array *array, u32 func,
unsigned int type)
{
if (type == KVM_GET_EMULATED_CPUID)
return __do_cpuid_func_emulated(array, func);
return __do_cpuid_func(array, func);
}
#define CENTAUR_CPUID_SIGNATURE 0xC0000000
static int get_cpuid_func(struct kvm_cpuid_array *array, u32 func,
unsigned int type)
{
u32 limit;
int r;
if (func == CENTAUR_CPUID_SIGNATURE &&
boot_cpu_data.x86_vendor != X86_VENDOR_CENTAUR)
return 0;
r = do_cpuid_func(array, func, type);
if (r)
return r;
limit = array->entries[array->nent - 1].eax;
for (func = func + 1; func <= limit; ++func) {
r = do_cpuid_func(array, func, type);
if (r)
break;
}
return r;
}
static bool sanity_check_entries(struct kvm_cpuid_entry2 __user *entries,
__u32 num_entries, unsigned int ioctl_type)
{
int i;
__u32 pad[3];
if (ioctl_type != KVM_GET_EMULATED_CPUID)
return false;
/*
* We want to make sure that ->padding is being passed clean from
* userspace in case we want to use it for something in the future.
*
* Sadly, this wasn't enforced for KVM_GET_SUPPORTED_CPUID and so we
* have to give ourselves satisfied only with the emulated side. /me
* sheds a tear.
*/
for (i = 0; i < num_entries; i++) {
if (copy_from_user(pad, entries[i].padding, sizeof(pad)))
return true;
if (pad[0] || pad[1] || pad[2])
return true;
}
return false;
}
int kvm_dev_ioctl_get_cpuid(struct kvm_cpuid2 *cpuid,
struct kvm_cpuid_entry2 __user *entries,
unsigned int type)
{
static const u32 funcs[] = {
0, 0x80000000, CENTAUR_CPUID_SIGNATURE, KVM_CPUID_SIGNATURE,
};
struct kvm_cpuid_array array = {
.nent = 0,
};
int r, i;
if (cpuid->nent < 1)
return -E2BIG;
if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
cpuid->nent = KVM_MAX_CPUID_ENTRIES;
if (sanity_check_entries(entries, cpuid->nent, type))
return -EINVAL;
array.entries = kvcalloc(sizeof(struct kvm_cpuid_entry2), cpuid->nent, GFP_KERNEL);
if (!array.entries)
return -ENOMEM;
array.maxnent = cpuid->nent;
for (i = 0; i < ARRAY_SIZE(funcs); i++) {
r = get_cpuid_func(&array, funcs[i], type);
if (r)
goto out_free;
}
cpuid->nent = array.nent;
if (copy_to_user(entries, array.entries,
array.nent * sizeof(struct kvm_cpuid_entry2)))
r = -EFAULT;
out_free:
kvfree(array.entries);
return r;
}
struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
u32 function, u32 index)
{
return cpuid_entry2_find(vcpu->arch.cpuid_entries, vcpu->arch.cpuid_nent,
function, index);
}
EXPORT_SYMBOL_GPL(kvm_find_cpuid_entry);
/*
KVM: x86: Fix CPUID range checks for Hypervisor and Centaur classes Rework the masking in the out-of-range CPUID logic to handle the Hypervisor sub-classes, as well as the Centaur class if the guest virtual CPU vendor is Centaur. Masking against 0x80000000 only handles basic and extended leafs, which results in Hypervisor range checks being performed against the basic CPUID class, and Centuar range checks being performed against the Extended class. E.g. if CPUID.0x40000000.EAX returns 0x4000000A and there is no entry for CPUID.0x40000006, then function 0x40000006 would be incorrectly reported as out of bounds. While there is no official definition of what constitutes a class, the convention established for Hypervisor classes effectively uses bits 31:8 as the mask by virtue of checking for different bases in increments of 0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100 when HyperV features are advertised at the default base of 0x40000000. The bad range check doesn't cause functional problems for any known VMM because out-of-range semantics only come into play if the exact entry isn't found, and VMMs either support a very limited Hypervisor range, e.g. the official KVM range is 0x40000000-0x40000001 (effectively no room for undefined leafs) or explicitly defines gaps to be zero, e.g. Qemu explicitly creates zeroed entries up to the Centaur and Hypervisor limits (the latter comes into play when providing HyperV features). The bad behavior can be visually confirmed by dumping CPUID output in the guest when running Qemu with a stable TSC, as Qemu extends the limit of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq, without defining zeroed entries for 0x40000002 - 0x4000000f. Note, documentation of Centaur/VIA CPUs is hard to come by. Designating 0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the behavior of a real Centaur/VIA CPU. Fixes: 43561123ab37 ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH") Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-05 01:34:34 +00:00
* Intel CPUID semantics treats any query for an out-of-range leaf as if the
* highest basic leaf (i.e. CPUID.0H:EAX) were requested. AMD CPUID semantics
* returns all zeroes for any undefined leaf, whether or not the leaf is in
* range. Centaur/VIA follows Intel semantics.
*
* A leaf is considered out-of-range if its function is higher than the maximum
* supported leaf of its associated class or if its associated class does not
* exist.
*
* There are three primary classes to be considered, with their respective
* ranges described as "<base> - <top>[,<base2> - <top2>] inclusive. A primary
* class exists if a guest CPUID entry for its <base> leaf exists. For a given
* class, CPUID.<base>.EAX contains the max supported leaf for the class.
*
* - Basic: 0x00000000 - 0x3fffffff, 0x50000000 - 0x7fffffff
* - Hypervisor: 0x40000000 - 0x4fffffff
* - Extended: 0x80000000 - 0xbfffffff
* - Centaur: 0xc0000000 - 0xcfffffff
*
* The Hypervisor class is further subdivided into sub-classes that each act as
* their own independent class associated with a 0x100 byte range. E.g. if Qemu
KVM: x86: Fix CPUID range checks for Hypervisor and Centaur classes Rework the masking in the out-of-range CPUID logic to handle the Hypervisor sub-classes, as well as the Centaur class if the guest virtual CPU vendor is Centaur. Masking against 0x80000000 only handles basic and extended leafs, which results in Hypervisor range checks being performed against the basic CPUID class, and Centuar range checks being performed against the Extended class. E.g. if CPUID.0x40000000.EAX returns 0x4000000A and there is no entry for CPUID.0x40000006, then function 0x40000006 would be incorrectly reported as out of bounds. While there is no official definition of what constitutes a class, the convention established for Hypervisor classes effectively uses bits 31:8 as the mask by virtue of checking for different bases in increments of 0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100 when HyperV features are advertised at the default base of 0x40000000. The bad range check doesn't cause functional problems for any known VMM because out-of-range semantics only come into play if the exact entry isn't found, and VMMs either support a very limited Hypervisor range, e.g. the official KVM range is 0x40000000-0x40000001 (effectively no room for undefined leafs) or explicitly defines gaps to be zero, e.g. Qemu explicitly creates zeroed entries up to the Centaur and Hypervisor limits (the latter comes into play when providing HyperV features). The bad behavior can be visually confirmed by dumping CPUID output in the guest when running Qemu with a stable TSC, as Qemu extends the limit of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq, without defining zeroed entries for 0x40000002 - 0x4000000f. Note, documentation of Centaur/VIA CPUs is hard to come by. Designating 0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the behavior of a real Centaur/VIA CPU. Fixes: 43561123ab37 ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH") Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-05 01:34:34 +00:00
* is advertising support for both HyperV and KVM, the resulting Hypervisor
* CPUID sub-classes are:
*
* - HyperV: 0x40000000 - 0x400000ff
* - KVM: 0x40000100 - 0x400001ff
*/
static struct kvm_cpuid_entry2 *
get_out_of_range_cpuid_entry(struct kvm_vcpu *vcpu, u32 *fn_ptr, u32 index)
{
KVM: x86: Fix CPUID range checks for Hypervisor and Centaur classes Rework the masking in the out-of-range CPUID logic to handle the Hypervisor sub-classes, as well as the Centaur class if the guest virtual CPU vendor is Centaur. Masking against 0x80000000 only handles basic and extended leafs, which results in Hypervisor range checks being performed against the basic CPUID class, and Centuar range checks being performed against the Extended class. E.g. if CPUID.0x40000000.EAX returns 0x4000000A and there is no entry for CPUID.0x40000006, then function 0x40000006 would be incorrectly reported as out of bounds. While there is no official definition of what constitutes a class, the convention established for Hypervisor classes effectively uses bits 31:8 as the mask by virtue of checking for different bases in increments of 0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100 when HyperV features are advertised at the default base of 0x40000000. The bad range check doesn't cause functional problems for any known VMM because out-of-range semantics only come into play if the exact entry isn't found, and VMMs either support a very limited Hypervisor range, e.g. the official KVM range is 0x40000000-0x40000001 (effectively no room for undefined leafs) or explicitly defines gaps to be zero, e.g. Qemu explicitly creates zeroed entries up to the Centaur and Hypervisor limits (the latter comes into play when providing HyperV features). The bad behavior can be visually confirmed by dumping CPUID output in the guest when running Qemu with a stable TSC, as Qemu extends the limit of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq, without defining zeroed entries for 0x40000002 - 0x4000000f. Note, documentation of Centaur/VIA CPUs is hard to come by. Designating 0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the behavior of a real Centaur/VIA CPU. Fixes: 43561123ab37 ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH") Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-05 01:34:34 +00:00
struct kvm_cpuid_entry2 *basic, *class;
u32 function = *fn_ptr;
KVM: x86: Fix CPUID range checks for Hypervisor and Centaur classes Rework the masking in the out-of-range CPUID logic to handle the Hypervisor sub-classes, as well as the Centaur class if the guest virtual CPU vendor is Centaur. Masking against 0x80000000 only handles basic and extended leafs, which results in Hypervisor range checks being performed against the basic CPUID class, and Centuar range checks being performed against the Extended class. E.g. if CPUID.0x40000000.EAX returns 0x4000000A and there is no entry for CPUID.0x40000006, then function 0x40000006 would be incorrectly reported as out of bounds. While there is no official definition of what constitutes a class, the convention established for Hypervisor classes effectively uses bits 31:8 as the mask by virtue of checking for different bases in increments of 0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100 when HyperV features are advertised at the default base of 0x40000000. The bad range check doesn't cause functional problems for any known VMM because out-of-range semantics only come into play if the exact entry isn't found, and VMMs either support a very limited Hypervisor range, e.g. the official KVM range is 0x40000000-0x40000001 (effectively no room for undefined leafs) or explicitly defines gaps to be zero, e.g. Qemu explicitly creates zeroed entries up to the Centaur and Hypervisor limits (the latter comes into play when providing HyperV features). The bad behavior can be visually confirmed by dumping CPUID output in the guest when running Qemu with a stable TSC, as Qemu extends the limit of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq, without defining zeroed entries for 0x40000002 - 0x4000000f. Note, documentation of Centaur/VIA CPUs is hard to come by. Designating 0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the behavior of a real Centaur/VIA CPU. Fixes: 43561123ab37 ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH") Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-05 01:34:34 +00:00
basic = kvm_find_cpuid_entry(vcpu, 0, 0);
if (!basic)
return NULL;
if (is_guest_vendor_amd(basic->ebx, basic->ecx, basic->edx) ||
is_guest_vendor_hygon(basic->ebx, basic->ecx, basic->edx))
return NULL;
KVM: x86: Fix CPUID range checks for Hypervisor and Centaur classes Rework the masking in the out-of-range CPUID logic to handle the Hypervisor sub-classes, as well as the Centaur class if the guest virtual CPU vendor is Centaur. Masking against 0x80000000 only handles basic and extended leafs, which results in Hypervisor range checks being performed against the basic CPUID class, and Centuar range checks being performed against the Extended class. E.g. if CPUID.0x40000000.EAX returns 0x4000000A and there is no entry for CPUID.0x40000006, then function 0x40000006 would be incorrectly reported as out of bounds. While there is no official definition of what constitutes a class, the convention established for Hypervisor classes effectively uses bits 31:8 as the mask by virtue of checking for different bases in increments of 0x100, e.g. KVM advertises its CPUID functions starting at 0x40000100 when HyperV features are advertised at the default base of 0x40000000. The bad range check doesn't cause functional problems for any known VMM because out-of-range semantics only come into play if the exact entry isn't found, and VMMs either support a very limited Hypervisor range, e.g. the official KVM range is 0x40000000-0x40000001 (effectively no room for undefined leafs) or explicitly defines gaps to be zero, e.g. Qemu explicitly creates zeroed entries up to the Centaur and Hypervisor limits (the latter comes into play when providing HyperV features). The bad behavior can be visually confirmed by dumping CPUID output in the guest when running Qemu with a stable TSC, as Qemu extends the limit of range 0x40000000 to 0x40000010 to advertise VMware's cpuid_freq, without defining zeroed entries for 0x40000002 - 0x4000000f. Note, documentation of Centaur/VIA CPUs is hard to come by. Designating 0xc0000000 - 0xcfffffff as the Centaur class is a best guess as to the behavior of a real Centaur/VIA CPU. Fixes: 43561123ab37 ("kvm: x86: Improve emulation of CPUID leaves 0BH and 1FH") Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-05 01:34:34 +00:00
if (function >= 0x40000000 && function <= 0x4fffffff)
class = kvm_find_cpuid_entry(vcpu, function & 0xffffff00, 0);
else if (function >= 0xc0000000)
class = kvm_find_cpuid_entry(vcpu, 0xc0000000, 0);
else
class = kvm_find_cpuid_entry(vcpu, function & 0x80000000, 0);
if (class && function <= class->eax)
return NULL;
/*
* Leaf specific adjustments are also applied when redirecting to the
* max basic entry, e.g. if the max basic leaf is 0xb but there is no
* entry for CPUID.0xb.index (see below), then the output value for EDX
* needs to be pulled from CPUID.0xb.1.
*/
*fn_ptr = basic->eax;
/*
* The class does not exist or the requested function is out of range;
* the effective CPUID entry is the max basic leaf. Note, the index of
* the original requested leaf is observed!
*/
return kvm_find_cpuid_entry(vcpu, basic->eax, index);
}
bool kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx,
u32 *ecx, u32 *edx, bool exact_only)
{
u32 orig_function = *eax, function = *eax, index = *ecx;
struct kvm_cpuid_entry2 *entry;
bool exact, used_max_basic = false;
entry = kvm_find_cpuid_entry(vcpu, function, index);
exact = !!entry;
if (!entry && !exact_only) {
entry = get_out_of_range_cpuid_entry(vcpu, &function, index);
used_max_basic = !!entry;
}
if (entry) {
*eax = entry->eax;
*ebx = entry->ebx;
*ecx = entry->ecx;
*edx = entry->edx;
if (function == 7 && index == 0) {
u64 data;
if (!__kvm_get_msr(vcpu, MSR_IA32_TSX_CTRL, &data, true) &&
(data & TSX_CTRL_CPUID_CLEAR))
*ebx &= ~(F(RTM) | F(HLE));
}
} else {
*eax = *ebx = *ecx = *edx = 0;
/*
* When leaf 0BH or 1FH is defined, CL is pass-through
* and EDX is always the x2APIC ID, even for undefined
* subleaves. Index 1 will exist iff the leaf is
* implemented, so we pass through CL iff leaf 1
* exists. EDX can be copied from any existing index.
*/
if (function == 0xb || function == 0x1f) {
entry = kvm_find_cpuid_entry(vcpu, function, 1);
if (entry) {
*ecx = index & 0xff;
*edx = entry->edx;
}
}
}
trace_kvm_cpuid(orig_function, index, *eax, *ebx, *ecx, *edx, exact,
used_max_basic);
return exact;
}
EXPORT_SYMBOL_GPL(kvm_cpuid);
int kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
{
u32 eax, ebx, ecx, edx;
if (cpuid_fault_enabled(vcpu) && !kvm_require_cpl(vcpu, 0))
return 1;
eax = kvm_rax_read(vcpu);
ecx = kvm_rcx_read(vcpu);
kvm_cpuid(vcpu, &eax, &ebx, &ecx, &edx, false);
kvm_rax_write(vcpu, eax);
kvm_rbx_write(vcpu, ebx);
kvm_rcx_write(vcpu, ecx);
kvm_rdx_write(vcpu, edx);
return kvm_skip_emulated_instruction(vcpu);
}
EXPORT_SYMBOL_GPL(kvm_emulate_cpuid);