<asm/dma-mapping.h> gets pulled in by all drivers using the DMA API.
Remove x86 internal variables and unnecessary includes from it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64
this works trivially, while for x86 xen_swiotlb_fixup needs to be passed
as the remap argument to swiotlb_init_remap/swiotlb_init_late.
Note that the lower bound of the swiotlb size is changed to the smaller
IO_TLB_MIN_SLABS based value with this patch, but that is fine as the
2MB value used in Xen before was just an optimization and is not the
hard lower bound.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
To shared more code between swiotlb and xen-swiotlb, offer a
swiotlb_init_remap interface and add a remap callback to
swiotlb_init_late that will allow Xen to remap the buffer without
duplicating much of the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Let the caller chose a zone to allocate from. This will be used
later on by the xen-swiotlb initialization on arm.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Power SVM wants to allocate a swiotlb buffer that is not restricted to
low memory for the trusted hypervisor scheme. Consolidate the support
for this into the swiotlb_init interface by adding a new flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Pass a boolean flag to indicate if swiotlb needs to be enabled based on
the addressing needs, and replace the verbose argument with a set of
flags, including one to force enable bounce buffering.
Note that this patch removes the possibility to force xen-swiotlb use
with the swiotlb=force parameter on the command line on x86 (arm and
arm64 never supported that), but this interface will be restored shortly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Move enabling SWIOTLB_FORCE for guest memory encryption into common code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The IOMMU table tries to separate the different IOMMUs into different
backends, but actually requires various cross calls.
Rewrite the code to do the generic swiotlb/swiotlb-xen setup directly
in pci-dma.c and then just call into the IOMMU drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
It used to be that Linux enabled swiotlb-xen when running a dom0 on ARM.
Since f5079a9a2a "xen/arm: introduce XENFEAT_direct_mapped and
XENFEAT_not_direct_mapped", Linux detects whether to enable or disable
swiotlb-xen based on the new feature flags: XENFEAT_direct_mapped and
XENFEAT_not_direct_mapped.
However, there is still a leftover xen_initial_domain() check in
xen_create_contiguous_region. Remove the check as
xen_create_contiguous_region is only called by swiotlb-xen during
initialization. If xen_create_contiguous_region is called, we know Linux
is running 1:1 mapped so there is no need for additional checks.
Also update the in-code comment.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
swiotlb_late_init_with_default_size is an overly verbose name that
doesn't even catch what the function is doing, given that the size is
not just a default but the actual requested size.
Rename it to swiotlb_init_late.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Remove the bogus Xen override that was usually larger than the actual
size and just calculate the value on demand. Note that
swiotlb_max_segment still doesn't make sense as an interface and should
eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
gcc -Wextra warns about mixing drbd_state_rv with drbd_ret_code
in a couple of places:
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_set_role':
drivers/block/drbd/drbd_nl.c:777:14: warning: comparison between 'enum drbd_state_rv' and 'enum drbd_ret_code' [-Wenum-compare]
777 | if (retcode != NO_ERROR)
| ^~
drivers/block/drbd/drbd_nl.c:784:12: warning: implicit conversion from 'enum drbd_ret_code' to 'enum drbd_state_rv' [-Wenum-conversion]
784 | retcode = ERR_MANDATORY_TAG;
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_attach':
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
1965 | retcode = rv; /* FIXME: Type mismatch. */
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_connect':
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2690 | retcode = conn_request_state(connection, NS(conn, C_UNCONNECTED), CS_VERBOSE);
| ^
drivers/block/drbd/drbd_nl.c: In function 'drbd_adm_disconnect':
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from 'enum drbd_state_rv' to 'enum drbd_ret_code' [-Wenum-conversion]
2803 | retcode = rv; /* FIXME: Type mismatch. */
| ^
In each case, both are passed into drbd_adm_finish(), which just takes
a 32-bit integer and is happy with either, presumably intentionally.
Restructure the code to pass either type directly in there in most
cases, avoiding the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-3-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are two initializers for P_RETRY_WRITE:
drivers/block/drbd/drbd_main.c:3676:22: warning: initialized field overwritten [-Woverride-init]
Remove the first one since it was already ignored by the compiler
and reorder the list to match the enum definition. As P_ZEROES had
no entry, add that one instead.
Fixes: 036b17eaab ("drbd: Receiving part for the PROTOCOL_UPDATE packet")
Fixes: f31e583aa2 ("drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20220406190715.1938174-2-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
