Pull x86 fixes from Thomas Gleixner:
"Two x86 fixes related to TSX:
- Use either MSR_TSX_FORCE_ABORT or MSR_IA32_TSX_CTRL to disable TSX
to cover all CPUs which allow to disable it.
- Disable TSX development mode at boot so that a microcode update
which provides TSX development mode does not suddenly make the
system vulnerable to TSX Asynchronous Abort"
* tag 'x86-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tsx: Disable TSX development mode at boot
x86/tsx: Use MSR_TSX_CTRL to clear CPUID bits
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for the timers core:
- Fix the warning condition in __run_timers() which does not take
into account that a CPU base (especially the deferrable base) never
has a timer armed on it and therefore the next_expiry value can
become stale.
- Replace a WARN_ON() in the NOHZ code with a WARN_ON_ONCE() to
prevent endless spam in dmesg.
- Remove the double star from a comment which is not meant to be in
kernel-doc format"
* tag 'timers-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Fix non-kernel-doc comment
tick/nohz: Use WARN_ON_ONCE() to prevent console saturation
timers: Fix warning condition in __run_timers()
Pull SMP fixes from Thomas Gleixner:
"Two fixes for the SMP core:
- Make the warning condition in flush_smp_call_function_queue()
correct, which checked a just emptied list head for being empty
instead of validating that there was no pending entry on the
offlined CPU at all.
- The @cpu member of struct cpuhp_cpu_state is initialized when the
CPU hotplug thread for the upcoming CPU is created. That's too late
because the creation of the thread can fail and then the following
rollback operates on CPU0. Get rid of the CPU member and hand the
CPU number to the involved functions directly"
* tag 'smp-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_state
smp: Fix offline cpu check in flush_smp_call_function_queue()
Pull irq fix from Thomas Gleixner:
"A single fix for the interrupt affinity spreading logic to take into
account that there can be an imbalance between present and possible
CPUs, which causes already assigned bits to be overwritten"
* tag 'irq-urgent-2022-04-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Consider that CPUs on nodes can be unbalanced
Pull power supply fixes from Sebastian Reichel:
- Fix a regression with battery data failing to load from DT
* tag 'for-v5.18-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: Reset err after not finding static battery
power: supply: samsung-sdi-battery: Add missing charge restart voltages
Pull i2c fixes from Wolfram Sang:
"Regular set of fixes for drivers and the dev-interface"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: ismt: Fix undefined behavior due to shift overflowing the constant
i2c: dev: Force case user pointers in compat_i2cdev_ioctl()
i2c: dev: check return value when calling dev_set_name()
i2c: qcom-geni: Use dev_err_probe() for GPI DMA error
i2c: imx: Implement errata ERR007805 or e7805 bus frequency limit
i2c: pasemi: Wait for write xfers to finish
The first attempt to fix a the 'impossible' WARN_ON_ONCE(1) in
isotp_tx_timer_handler() focussed on the identical CAN IDs created by
the syzbot reproducer and lead to upstream fix/commit 3ea566422c
("can: isotp: sanitize CAN ID checks in isotp_bind()"). But this did
not catch the root cause of the wrong tx.state in the tx_timer handler.
In the isotp 'first frame' case a timeout monitoring needs to be started
before the 'first frame' is send. But when this sending failed the timeout
monitoring for this specific frame has to be disabled too.
Otherwise the tx_timer is fired with the 'warn me' tx.state of ISOTP_IDLE.
Fixes: e057dd3fc2 ("can: add ISO 15765-2:2016 transport protocol")
Link: https://lore.kernel.org/all/20220405175112.2682-1-socketcan@hartkopp.net
Reported-by: syzbot+2339c27f5c66c652843e@syzkaller.appspotmail.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If all completed requests in io_do_iopoll() were marked with
REQ_F_CQE_SKIP, we'll not only skip CQE posting but also
io_free_batch_list() leaking memory and resources.
Move @nr_events increment before REQ_F_CQE_SKIP check. We'll potentially
return the value greater than the real one, but iopolling will deal with
it and the userspace will re-iopoll if needed. In anyway, I don't think
there are many use cases for REQ_F_CQE_SKIP + IOPOLL.
Fixes: 83a13a4181 ("io_uring: tweak iopoll CQE_SKIP event counting")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5072fc8693fbfd595f89e5d4305bfcfd5d2f0a64.1650186611.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b5f862180d was introduced to discard lowest hash bit for layer3+4 hashing
but it also removes last bit from non layer3+4 hashing
Below script shows layer2+3 hashing will result in same slave to be used with above commit.
$ cat hash.py
#/usr/bin/python3.6
h_dests=[0xa0, 0xa1]
h_source=0xe3
hproto=0x8
saddr=0x1e7aa8c0
daddr=0x17aa8c0
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
print(hash)
print("with last bit removed")
for h_dest in h_dests:
hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr)
hash ^= hash >> 16
hash ^= hash >> 8
hash = hash >> 1
print(hash)
Output:
$ python3.6 hash.py
522133332
522133333 <-------------- will result in both slaves being used
with last bit removed
261066666
261066666 <-------------- only single slave used
Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
tcp: drop reason additions
Currently, TCP is either missing drop reasons,
or pretending that some useful packets are dropped.
This patch series makes "perf record -a -e skb:kfree_skb"
much more usable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
packets in OFO queue might be redundant, and dropped.
tcp_drop() is no longer needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) A valid RST packet should be consumed, to not confuse drop monitor.
2) Same remark for packet validating cross syn setup,
even if we might ignore part of it.
3) When third packet of 3WHS is delayed, do not pretend
the SYNACK was dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add one reason for packets dropped from OFO queue because
of memory pressure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add TCP_TOO_OLD_ACK and TCP_ACK_UNSENT_DATA drop
reasons so that tcp_rcv_established() can report
them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add basic support for drop reasons in tcp_rcv_state_process()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_rcv_state_process() incorrectly drops packets
instead of consuming it, making drop monitor very noisy,
if not unusable.
Calling tcp_time_wait() or tcp_done() is part
of standard behavior, packets triggering these actions
were not dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Creates four new drop reasons for the following cases:
1) packet being rejected by RFC 7323 PAWS check
2) packet being rejected by SEQUENCE check
3) Invalid RST packet
4) Invalid SYN packet
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Small cleanup in tcp_validate_incoming(), no need for rst_seq_match
setting and testing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever tcp_validate_incoming() handles a valid RST packet,
we should not pretend the packet was dropped.
Create a special section at the end of tcp_validate_incoming()
to handle this case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ansuel Smith says:
====================
net: Reduce qca8k_priv space usage
These 6 patch is a first attempt at reducting qca8k_priv space.
The code changed a lot during times and we have many old logic
that can be replaced with new implementation
The first patch drop the tracking of MTU. We mimic what was done
for mtk and we change MTU only when CPU port is changed.
The second patch finally drop a piece of story of this driver.
The ar8xxx_port_status struct was used by the first implementation
of this driver to put all sort of status data for the port...
With the evolution of DSA all that stuff got dropped till only
the enabled state was the only part of the that struct.
Since it's overkill to keep an array of int, we convert the variable
to a simple u8 where we store the status of each port. This is needed
to don't reanable ports on system resume.
The third patch is a preparation for patch 4. As Vladimir explained
in another patch, we waste a tons of space by keeping a duplicate of
the switch dsa ops in qca8k_priv. The only reason for this is to
dynamically set the correct mdiobus configuration (a legacy dsa one,
or a custom dedicated one)
To solve this problem, we just drop the phy_read/phy_write and we
declare a custom mdiobus in any case.
This way we can use a static dsa switch ops struct and we can drop it
from qca8k_priv
Patch 4 drop the duplicated dsa_switch_ops.
Patch 5 is a fixup for mdio read error.
Patch 6 is an effort to standardize how bus name are done.
This series is just a start of more cleanup.
The idea is to move this driver to the qca dir and split common code
from specific code. Also the mgmt eth code still requires some love
and can totally be optimized by recycling the same skb over time.
Also while working on the MTU it was notice some problem with
the stmmac driver and with the reloading phase that cause all
sort of problems with qca8k.
I'm sending this here just to try to keep small series instead of
proposing monster series hard to review.
v2:
- Rework MTU patch
v3:
- Drop unrealated changes from patch 3
- Add fixup patch for mdio read
- Unify bus name for legacy and OF mdio bus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for multiple switch with OF mdio bus declaration.
Unify the bus id naming and use the same logic for both legacy and OF
mdio bus.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Restore original way to handle mdio read error by returning 0xffff.
This was wrongly changed when the internal_mdio_read was introduced,
now that both legacy and internal use the same function, make sure that
they behave the same way.
Fixes: ce062a0adb ("net: dsa: qca8k: fix kernel panic with legacy mdio mapping")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that dsa_switch_ops is not switch specific anymore, we can drop it
from qca8k_priv and use the static ops directly for the dsa_switch
pointer.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In an attempt to reduce qca8k_priv space, rework and simplify mdiobus
logic.
We now declare a mdiobus instead of relying on DSA phy_read/write even
if a mdio node is not present. This is all to make the qca8k ops static
and not switch specific. With a legacy implementation where port doesn't
have a phy map declared in the dts with a mdio node, we declare a
'qca8k-legacy' mdiobus. The conversion logic is used as legacy read and
write ops are used instead of the internal one.
Also drop the legacy_phy_port_mapping as we now declare mdiobus with ops
that already address the workaround.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Port_sts is a thing of the past for this driver. It was something
present on the initial implementation of this driver and parts of the
original struct were dropped over time. Using an array of int to store if
a port is enabled or not to handle PM operation seems overkill. Switch
and use a simple u8 to store the port status where each bit correspond
to a port. (bit is set port is enabled, bit is not set, port is disabled)
Also add some comments to better describe why we need to track port
status.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA set the CPU port based on the largest MTU of all the slave ports.
Based on this we can drop the MTU array from qca8k_priv and set the
port_change_mtu logic on DSA changing MTU of the CPU port as the switch
have a global MTU settingfor each port.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new neighbour cache entry in STALE state for routers on receiving
an unsolicited (gratuitous) neighbour advertisement with
target link-layer-address option specified.
This is similar to the arp_accept configuration for IPv4.
A new sysctl endpoint is created to turn on this behaviour:
/proc/sys/net/ipv6/conf/interface/accept_unsolicited_na.
Signed-off-by: Arun Ajith S <aajith@arista.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We just return failure in this case, but we need to release the iovec
first. If we're doing IO with more than FAST_IOV segments, then the
iovec is allocated and must be freed.
Reported-by: syzbot+96b43810dfe9c3bb95ed@syzkaller.appspotmail.com
Fixes: 584b0180f0 ("io_uring: move read/write file prep state into actual opcode handler")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't exit if used this way:
sudo setcap cap_sys_nice,cap_sys_rawio=+ep ./turbostat
sudo chmod +r /dev/cpu/*/msr
./turbostat
note: cap_sys_admin is now also needed for the perf IPC counter:
sudo setcap cap_sys_admin,cap_sys_nice,cap_sys_rawio=+ep ./turbostat
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Toby Broom <tbroom@outlook.com>
Signed-off-by: Len Brown <len.brown@intel.com>
ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
The turbostat data is collected by end user for power evaluationit. However
it looks like we are missing enough thermal context there. Already a couple of
time we found that power management developer asking something like this:
grep -r . /sys/devices/system/cpu/cpu*/thermal_throttle/*
Print the per core thermal throttle count so as to get suffificent thermal
context.
turbostat -i 5 -s Core,CPU,CoreThr
Core CPU CoreThr
- - 104
0 0 61
0 4
1 1 0
1 5
2 2 104
2 6
3 3 7
3 7
Suggested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
This gives the ability to reprint the header every N iterations, so you
can ensure that a scrolling display always has the header visible
somewhere on the screen.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Currently, there are a number of variables which are displayed by
default, enabled with -e all, and listed by --list, but which you can
not give to --enable/-e.
So you can enable CPU0c1 (in the bic array), but you can't enable C1 or
C1% (not in the bic array, but exists in sysfs).
This runs counter to both the documentation and user expectations, and
it's just not very user friendly.
As such, the mechanism used by --hide has been duplicated, and is now
also used by --enable, so we can handle unknown names gracefully.
Note: One impact of this is that truly unknown fields given to --enable
will no longer generate errors, they will be silently ignored, as --hide
does.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
turbostat --Dump exits early with status 243 (-13)
get_counters() calls get_msr_sum() on zen CPUS
for MSR_PKG_ENERGY_STAT, but per_cpu_msr_sum
has not been initialized.
Signed-off-by: Dan Merillat <git@dan.eginity.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Pull gpio fixes from Bartosz Golaszewski:
"A single fix for gpio-sim and two patches for GPIO ACPI pulled from
Andy:
- fix the set/get_multiple() callbacks in gpio-sim
- use correct format characters in gpiolib-acpi
- use an unsigned type for pins in gpiolib-acpi"
* tag 'gpio-fixes-for-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix setting and getting multiple lines
gpiolib: acpi: Convert type for pin to be unsigned
gpiolib: acpi: use correct format characters
Pull ARM SoC fixes from Arnd Bergmann:
"There are a number of SoC bugfixes that came in since the merge
window, and more of them are already pending.
This batch includes:
- A boot time regression fix for davinci that triggered on
multi_v5_defconfig when booting any platform
- Defconfig updates to address removed features, changed symbol names
or dependencies, for gemini, ux500, and pxa
- Email address changes for Krzysztof Kozlowski
- Build warning fixes for ep93xx and iop32x
- Devicetree warning fixes across many platforms
- Minor bugfixes for the reset controller, memory controller and SCMI
firmware subsystems plus the versatile-express board"
* tag 'soc-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (34 commits)
ARM: config: Update Gemini defconfig
arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with values
ARM: dts: align SPI NOR node name with dtschema
ARM: dts: Fix more boolean properties with values
arm/arm64: dts: qcom: Fix boolean properties with values
arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes
arm: dts: imx: Fix boolean properties with values
arm64: dts: tegra: Fix boolean properties with values
arm: dts: at91: Fix boolean properties with values
arm: configs: imote2: Drop defconfig as board support dropped.
ep93xx: clock: Don't use plain integer as NULL pointer
ep93xx: clock: Fix UAF in ep93xx_clk_register_gate()
ARM: vexpress/spc: Fix all the kernel-doc build warnings
ARM: vexpress/spc: Fix kernel-doc build warning for ve_spc_cpu_in_wfi
ARM: config: u8500: Re-enable AB8500 battery charging
ARM: config: u8500: Add some common hardware
memory: fsl_ifc: populate child nodes of buses and mfd devices
ARM: config: Refresh U8500 defconfig
firmware: arm_scmi: Fix sparse warnings in OPTEE transport driver
firmware: arm_scmi: Replace zero-length array with flexible-array member
...
Pull random number generator fixes from Jason Donenfeld:
- Per your suggestion, random reads now won't fail if there's a page
fault after some non-zero amount of data has been read, which makes
the behavior consistent with all other reads in the kernel.
- Rather than an inconsistent mix of random_get_entropy() returning an
unsigned long or a cycles_t, now it just returns an unsigned long.
- A memcpy() was replaced with an memmove(), because the addresses are
sometimes overlapping. In practice the destination is always before
the source, so not really an issue, but better to be correct than
not.
* tag 'random-5.18-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: use memmove instead of memcpy for remaining 32 bytes
random: make random_get_entropy() return an unsigned long
random: allow partial reads if later user copies fail
In order to test various backward-edge control flow integrity methods,
add a test that manipulates the return address on the stack. Currently
only arm64 Pointer Authentication and Shadow Call Stack is supported.
$ echo CFI_BACKWARD | cat >/sys/kernel/debug/provoke-crash/DIRECT
Under SCS, successful test of the mitigation is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: ok: control flow unchanged.
Under PAC, successful test of the mitigation is reported by the PAC
exception handler:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
Unable to handle kernel paging request at virtual address bfffffc0088d0514
Mem abort info:
ESR = 0x86000004
EC = 0x21: IABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
[bfffffc0088d0514] address between user and kernel address ranges
...
If the CONFIGs are missing (or the mitigation isn't working), failure
is reported as:
lkdtm: Performing direct entry CFI_BACKWARD
lkdtm: Attempting unchecked stack return address redirection ...
lkdtm: ok: redirected stack return address.
lkdtm: Attempting checked stack return address redirection ...
lkdtm: FAIL: stack return address was redirected!
lkdtm: This is probably expected, since this kernel was built *without* CONFIG_ARM64_PTR_AUTH_KERNEL=y nor CONFIG_SHADOW_CALL_STACK=y
Co-developed-by: Dan Li <ashimida@linux.alibaba.com>
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/lkml/20220416001103.1524653-1-keescook@chromium.org
Pull SCSI fixes from James Bottomley:
"13 fixes, all in drivers.
The most extensive changes are in the iscsi series (affecting drivers
qedi, cxgbi and bnx2i), the next most is scsi_debug, but that's just a
simple revert and then minor updates to pm80xx"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: MAINTAINERS: Add Mike Christie as co-maintainer
scsi: qedi: Fix failed disconnect handling
scsi: iscsi: Fix NOP handling during conn recovery
scsi: iscsi: Merge suspend fields
scsi: iscsi: Fix unbound endpoint error handling
scsi: iscsi: Fix conn cleanup and stop race during iscsid restart
scsi: iscsi: Fix endpoint reuse regression
scsi: iscsi: Release endpoint ID when its freed
scsi: iscsi: Fix offload conn cleanup when iscsid restarts
scsi: iscsi: Move iscsi_ep_disconnect()
scsi: pm80xx: Enable upper inbound, outbound queues
scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63
Revert "scsi: scsi_debug: Address races following module load"
intel-gpio for v5.18-2
* Couple of fixes related to handling unsigned value of the pin from ACPI
gpiolib:
- acpi: Convert type for pin to be unsigned
- acpi: use correct format characters
Pull dma-mapping fix from Christoph Hellwig:
- avoid a double memory copy for swiotlb (Chao Gao)
* tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: avoid redundant memory sync for swiotlb
Disable gmac0 which is not connected to any switch MAC. Enable port@8 of
the Broadcom switch which is connected to gmac2.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
