FIX_EARLY_DEBUG_BASE reserves a 128k area for debuging.
When page size is 256k, the calculation results in a 0 number of
pages, leading to the following failure:
CC arch/powerpc/kernel/asm-offsets.s
In file included from ./arch/powerpc/include/asm/nohash/32/pgtable.h:77:0,
from ./arch/powerpc/include/asm/nohash/pgtable.h:8,
from ./arch/powerpc/include/asm/pgtable.h:20,
from ./include/linux/pgtable.h:6,
from ./arch/powerpc/include/asm/kup.h:42,
from ./arch/powerpc/include/asm/uaccess.h:9,
from ./include/linux/uaccess.h:11,
from ./include/linux/crypto.h:21,
from ./include/crypto/hash.h:11,
from ./include/linux/uio.h:10,
from ./include/linux/socket.h:8,
from ./include/linux/compat.h:15,
from arch/powerpc/kernel/asm-offsets.c:14:
./arch/powerpc/include/asm/fixmap.h:75:2: error: overflow in enumeration values
__end_of_permanent_fixed_addresses,
^
make[2]: *** [arch/powerpc/kernel/asm-offsets.s] Error 1
Ensure the debug area is at least one page.
Fixes: b8e8efaa86 ("powerpc: reserve fixmap entries for early debug")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ca8c9f8249f523b1fab873e67b81b11989d46553.1592207216.git.christophe.leroy@csgroup.eu
Extend the alignment handler selftest to exercise prefixed load store
instructions. Add tests for prefixed VSX, floating point and integer
instructions.
Skip prefix tests if ISA version does not support prefixed instructions.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
[mpe: Fixup PPC_FEATURE2_ARCH_3_1 naming as noted by Alistair]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-2-jniethe5@gmail.com
This reverts commit 8ece3b3eb5.
This commit broke userspace. Bash uses ESPIPE to determine whether or
not the file should be read using "unbuffered I/O", which means reading
1 byte at a time instead of 128 bytes at a time. I used to use bash to
read through kmsg in a really quite nasty way:
while read -t 0.1 -r line 2>/dev/null || [[ $? -ne 142 ]]; do
echo "SARU $line"
done < /dev/kmsg
This will show all lines that can fit into the 128 byte buffer, and skip
lines that don't. That's pretty awful, but at least it worked.
With this change, bash now tries to do 1-byte reads, which means it
skips all the lines, which is worse than before.
Now, I don't really care very much about this, and I'm already look for
a workaround. But I did just spend an hour trying to figure out why my
scripts were broken. Either way, it makes no difference to me personally
whether this is reverted, but it might be something to consider. If you
declare that "trying to read /dev/kmsg with bash is terminally stupid
anyway," I might be inclined to agree with you. But do note that bash
uses lseek(fd, 0, SEEK_CUR)==>ESPIPE to determine whether or not it's
reading from a pipe.
Cc: Bruno Meneguele <bmeneg@redhat.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
open_shroot() invokes kref_get(), which increases the refcount of the
"tcon->crfid" object. When open_shroot() returns not zero, it means the
open operation failed and close_shroot() will not be called to decrement
the refcount of the "tcon->crfid".
The reference counting issue happens in one normal path of
open_shroot(). When the cached root have been opened successfully in a
concurrent process, the function increases the refcount and jump to
"oshr_free" to return. However the current return value "rc" may not
equal to 0, thus the increased refcount will not be balanced outside the
function, causing a refcnt leak.
Fix this issue by setting the value of "rc" to 0 before jumping to
"oshr_free" label.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
After recent changes, io_submit_sqes() always passes valid submit state,
so kill leftovers checking it for NULL.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's a good practice to modify fields of a struct after but not before
it was initialised. Even though io_init_poll_iocb() doesn't touch
poll->file, call it first.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_F_MUST_PUNT may seem looking good and clear, but it's the same
as not having REQ_F_NOWAIT set. That rather creates more confusion.
Moreover, it doesn't even affect any behaviour (e.g. see the patch
removing it from io_{read,write}).
Kill theg flag and update already outdated comments.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_{read,write}() {
...
copy_iov: // prep async
if (!(flags & REQ_F_NOWAIT) && !file_can_poll(file))
flags |= REQ_F_MUST_PUNT;
}
REQ_F_MUST_PUNT there is pointless, because if it happens then
REQ_F_NOWAIT is known to be _not_ set, and the request will go
async path in __io_queue_sqe() anyway. file_can_poll() check
is also repeated in arm_poll*(), so don't need it.
Remove the mentioned assignment REQ_F_MUST_PUNT in preparation
for killing the flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull in async buffered reads branch.
* async-buffered.8:
io_uring: support true async buffered reads, if file provides it
mm: add kiocb_wait_page_queue_init() helper
btrfs: flag files as supporting buffered async reads
xfs: flag files as supporting buffered async reads
block: flag block devices as supporting IOCB_WAITQ
fs: add FMODE_BUF_RASYNC
mm: support async buffered reads in generic_file_buffered_read()
mm: add support for async page locking
mm: abstract out wake_page_match() from wake_page_function()
mm: allow read-ahead with IOCB_NOWAIT set
io_uring: re-issue block requests that failed because of resources
io_uring: catch -EIO from buffered issue request failure
io_uring: always plug for any number of IOs
block: provide plug based way of signaling forced no-wait semantics
If the file is flagged with FMODE_BUF_RASYNC, then we don't have to punt
the buffered read to an io-wq worker. Instead we can rely on page
unlocking callbacks to support retry based async IO. This is a lot more
efficient than doing async thread offload.
The retry is done similarly to how we handle poll based retry. From
the unlock callback, we simply queue the retry to a task_work based
handler.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Checks if the file supports it, and initializes the values that we need.
Caller passes in 'data' pointer, if any, and the callback function to
be used.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the async page locking infrastructure, if IOCB_WAITQ is set in the
passed in iocb. The caller must expect an -EIOCBQUEUED return value,
which means that IO is started but not done yet. This is similar to how
O_DIRECT signals the same operation. Once the callback is received by
the caller for IO completion, the caller must retry the operation.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Normally waiting for a page to become unlocked, or locking the page,
requires waiting for IO to complete. Add support for lock_page_async()
and wait_on_page_locked_async(), which are callback based instead. This
allows a caller to get notified when a page becomes unlocked, rather
than wait for it.
We add a new iocb field, ki_waitq, to pass in the necessary data for this
to happen. We can unionize this with ki_cookie, since that is only used
for polled IO. Polled IO can never co-exist with async callbacks, as it is
(by definition) polled completions. struct wait_page_key is made public,
and we define struct wait_page_async as the interface between the caller
and the core.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No functional changes in this patch, just in preparation for allowing
more callers.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The read-ahead shouldn't block, so allow it to be done even if
IOCB_NOWAIT is set in the kiocb.
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Mark the plug with nowait == true, which will cause requests to avoid
blocking on request allocation. If they do, we catch them and reissue
them from a task_work based handler.
Normally we can catch -EAGAIN directly, but the hard case is for split
requests. As an example, the application issues a 512KB request. The
block core will split this into 128KB if that's the max size for the
device. The first request issues just fine, but we run into -EAGAIN for
some latter splits for the same request. As the bio is split, we don't
get to see the -EAGAIN until one of the actual reads complete, and hence
we cannot handle it inline as part of submission.
This does potentially cause re-reads of parts of the range, as the whole
request is reissued. There's currently no better way to handle this.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-EIO bubbles up like -EAGAIN if we fail to allocate a request at the
lower level. Play it safe and treat it like -EAGAIN in terms of sync
retry, to avoid passing back an errant -EIO.
Catch some of these early for block based file, as non-mq devices
generally do not support NOWAIT. That saves us some overhead by
not first trying, then retrying from async context. We can go straight
to async punt instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we only plug if we're doing more than two request. We're going
to be relying on always having the plug there to pass down information,
so plug unconditionally.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide a way for the caller to specify that IO should be marked
with REQ_NOWAIT to avoid blocking on allocation.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ring pages are not pinned so it is more appropriate to report them
as locked.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
poll events should be 32-bits to cover EPOLLEXCLUSIVE.
Explicit word-swap the poll32_events for big endian to make sure the ABI
is not changed. We call this feature IORING_FEAT_POLL_32BITS,
applications who want to use EPOLLEXCLUSIVE should check the feature bit
first.
Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The alignment handler selftest needs cache-inhibited memory and
currently /dev/fb0 is relied on to provided this. This prevents running
the test on systems without /dev/fb0 (e.g., mambo). Read the commandline
arguments for an optional path to be used instead, as well as an
optional offset to be for mmaping this path.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Tested-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200520021103.19798-1-jniethe5@gmail.com
The iommu_table_ops::xchg_no_kill() callback updates TCE. It is quite
possible that not entire table is allocated if it is huge and multilevel
so xchg may also allocate subtables. If failed, it returns H_HARDWARE
for failed allocation and H_TOO_HARD if it needs it but cannot do because
the alloc parameter is "false" (set when called with MMU=off to force
retry with MMU=on).
The problem is that having separate errors only matters in real mode
(MMU=off) but the only caller with alloc="false" does not check the exact
error code and simply returns H_TOO_HARD; and for every other mode
alloc is "true". Also, the function is also called from the ioctl()
handler of the VFIO SPAPR TCE IOMMU subdriver which does not expect
hypervisor error codes (H_xxx) and will expose them to the userspace.
This converts wrong error codes to -ENOMEM.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200617003835.48831-1-aik@ozlabs.ru
Since commit cbe46bd4f5 ("powerpc: remove CONFIG_CMDLINE #ifdef mess")
CONFIG_CMDLINE has always had a value regardless of CONFIG_CMDLINE_BOOL.
For example:
$ make ARCH=powerpc defconfig
$ cat .config
# CONFIG_CMDLINE_BOOL is not set
CONFIG_CMDLINE=""
When enabling CONFIG_CMDLINE_BOOL this value is kept making the 'default
"..." if CONFIG_CMDLINE_BOOL' ineffective.
$ ./scripts/config --enable CONFIG_CMDLINE_BOOL
$ cat .config
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE=""
Remove CONFIG_CMDLINE_BOOL and the inaccessible default.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200611224220.25066-2-chris.packham@alliedtelesis.co.nz
Pull SELinux fixes from Paul Moore:
"Three small patches to fix problems in the SELinux code, all found via
clang.
Two patches fix potential double-free conditions and one fixes an
undefined return value"
* tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix undefined return of cond_evaluate_expr
selinux: fix a double free in cond_read_node()/cond_read_list()
selinux: fix double free
Pull pin control fixes from Linus Walleij:
"Some early fixes collected during the first week after the merge
window, all pretty self-evident, with the details below. The revert is
the crucial thing.
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct
- Use the noirq variants of the suspend and resume callbacks in the
Tegra driver
- Clean up the errorpath on the MCP23s08 driver
- Revert the use of devm_of_iomap() in the Freescale driver as it was
regressing the platform
- Add some missing pins in the Qualcomm IPQ6018 driver
- Fix a simple documentation bug in the pinctrl-single driver"
* tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: single: fix function name in documentation
pinctrl: qcom: ipq6018 Add missing pins in qpic pin group
Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"
pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings
pinctrl: tegra: Use noirq suspend/resume callbacks
pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
Pull Kbuild fixes from Masahiro Yamada:
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable
compile option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
* tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: watch_queue: build sample program for target architecture
Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"
scripts: Fix typo in headers_install.sh
kconfig: unify cc-option and as-option
kbuild: improve cc-option to clean up all temporary files
Makefile: Improve compressed debug info support detection
