Compare commits

..

36 Commits

Author SHA1 Message Date
stroese
cd5b2b9941 * Patch by Stefan Roese, 5 Jul 2005:
Update uc100 board PHY setup
2005-07-05 11:35:27 +00:00
wdenk
88804d19e2 * Patch by Detlev Zundel, 30 Jun 2005:
Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
2005-07-04 00:03:16 +00:00
stroese
3c71f3e8aa * Patch by Stefan Roese, 1 Jul 2005:
Fix PHY address for CATcenter board (now correct!)
2005-07-01 15:53:57 +00:00
stroese
bf41886f9d * Patch by Stefan Roese, 30 Jun 2005:
Fix PHY addresses for PPChameleon and CATcenter boards
  Change MAINTAINER for most esd boards
2005-06-30 13:06:07 +00:00
wdenk
342717f72a * Fix baudrate calculation problem on MPC5200 systems
* Add MPC8220 boards to MAKEALL script

* Add EEPROM and RTC support for HMI1001 board

* Patch by Detlev Zundel, 20 Jun 2005:
  Fix initialization of low active GPIO pins on inka4x0 board
2005-06-27 13:30:03 +00:00
wdenk
024447b186 Enable redundant environment, disable HW flash protection of HMI1001 board 2005-06-20 10:28:38 +00:00
wdenk
b2532eff87 * Patch by Travis Sawyer, 10 Jun 2005:
Initialize allocated dev and private hw structures
  after their respective allocation in 440gx_enet.c

* Patch by Steven Scholz, 10 Jun 2005:
  Fix byteorder problems with second argument of "bootm" with
  standalone images;
2005-06-20 10:17:34 +00:00
wdenk
a87589da74 * Add support for HMI1001 board
* Disable "date" and "sntp" commands on TQM866M which has no RTC
2005-06-10 10:00:19 +00:00
wdenk
51152c173d Fix watchdog reset problems on LWMON board 2005-06-05 20:30:43 +00:00
wdenk
ba91e26a19 Patch by Juergen Selent, 17 May 2005:
Add support for Funkwerk VoVPN gateway module.
2005-05-30 23:55:42 +00:00
wdenk
2eab48f511 * Extend burst mode RAM test program to take a loop count
(0 = infinite)

* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
  those boards that use it.
2005-05-23 10:49:50 +00:00
wdenk
16b013e750 Patch by Greg Ungerer, 19 May 2005:
add support for the OpenGear CM4008 board
2005-05-19 22:46:33 +00:00
wdenk
121fc64022 Patch by Greg Ungerer, 19 May 2005:
add support for the OpenGear CM4008 board
2005-05-19 22:46:33 +00:00
wdenk
3a574cbe72 * Patch by Greg Ungerer, 19 May 2005:
add support for the KS8695P (ARM 922 based) CPU

* Patch by Steven Scholz, 19 May 2005:
  Add support for CONFIG_SERIAL_TAG on ARM boards
2005-05-19 22:39:42 +00:00
wdenk
7680c140af Add PCI support for Sorcery board.
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
2005-05-16 15:23:22 +00:00
wdenk
c01766307c Fix compile problems caused by new burst mode SDRAM test;
make port pins to trigger logic analyzer configurable
2005-05-16 14:19:49 +00:00
wdenk
343117bf12 Fix timer handling on MPC85xx systems 2005-05-13 22:49:36 +00:00
wdenk
9dd41a7b0c * Fix debug code in omap5912osk flash driver
* Add support for MPC8247 based "IDS8247" board.
2005-05-12 22:48:09 +00:00
wdenk
d44e14b5fc Add support for 2 x TSEC interfaces on the TQM8540 board. 2005-05-10 15:51:35 +00:00
wdenk
ed16fefcba On LWMON we must use the watchdog to reset the board as the CPU
genereated HRESET pulse is too short to reset the external circuitry.
2005-05-09 10:17:32 +00:00
wdenk
931da93e0f Add test tool to exercise SDRAM accesses in burst mode
(as standalone program, MPC8xx/PowerPC only)
2005-05-07 19:06:32 +00:00
wdenk
412babe304 It's better to handle LZO and LZARI compression mdoes for JFFS2 with
a single #define.
2005-05-05 09:51:44 +00:00
wdenk
60fc6cbbb7 Increase CFG_MONITOR_LEN for Rattler board to match actual code size. 2005-05-05 09:13:21 +00:00
wdenk
07cc099941 Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
2005-05-05 00:04:14 +00:00
wdenk
cf8bc5773c Fix problem with symbolic links in JFFS2 code. 2005-05-04 23:50:54 +00:00
wdenk
a710d4be80 Use linker ASSERT statement to prevent undetected overlapping of
sections on PPChameleon board; other boards might use this, too.
2005-05-04 23:44:59 +00:00
wdenk
90dc67049d README: add explanation about patch policy
net/net.c: fix indentation
2005-05-03 14:12:25 +00:00
stroese
434cf850a4 * Patch by Stefan Roese, 03 May 2005:
Update for P3G4
  Fix problems in cmd_universe.c

* Patch by Matthias Fuchs, 03 May 2005:
  Added missing variable declaration in cmd_nand.c
  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
2005-05-03 06:19:57 +00:00
stroese
81b83c9ecc * Patch by Matthias Fuchs, 03 May 2005:
Added missing variable declaration in cmd_nand.c
  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
2005-05-03 06:12:20 +00:00
stroese
dcb2f95a60 * Patch by Stefan Roese, 03 May 2005:
Update for P3G4
  Fix problems in cmd_universe.c
2005-05-03 06:06:41 +00:00
wdenk
9f709b6cee Fix INKA4x0: use CS1 as gpio_wkup_6 output 2005-04-22 15:09:09 +00:00
wdenk
a63109281a Fix bug in the SDRAM initialization code for canmb, IceCube and
PM520 boards.

Fix PHY address for canmb board.
2005-04-21 21:10:22 +00:00
wdenk
7cc1438d43 get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition 2005-04-20 14:38:59 +00:00
wdenk
ec0ca73190 Cleanup serial console baudrate calculation on AT91RM9200 2005-04-20 12:36:05 +00:00
wdenk
b2323ea6f9 Auto-size RAM on canmb board.
Cleanup.
2005-04-20 09:28:54 +00:00
stroese
fddae7b811 * Patch by Matthias Fuchs, 18 Apr 2005:
Make PCI target address spaces on PMC405 and CPCI405 boards
  configurable via environment variables
2005-04-20 06:52:40 +00:00
118 changed files with 9437 additions and 1054 deletions

112
CHANGELOG
View File

@@ -2,6 +2,118 @@
Changes for U-Boot 1.1.3:
======================================================================
* Patch by Stefan Roese, 5 Jul 2005:
Update uc100 board PHY setup
* Patch by Stefan Roese, 1 Jul 2005:
Fix PHY address for CATcenter board (now correct!)
* Patch by Stefan Roese, 30 Jun 2005:
Fix PHY addresses for PPChameleon and CATcenter boards
Change MAINTAINER for most esd boards
* Patch by Detlev Zundel, 30 Jun 2005:
Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
* Fix baudrate calculation problem on MPC5200 systems
* Add EEPROM and RTC support for HMI1001 board
* Patch by Detlev Zundel, 20 Jun 2005:
Fix initialization of low active GPIO pins on inka4x0 board
* Enable redundant environment, disable HW flash protection of
HMI1001 board
* Patch by Travis Sawyer, 10 Jun 2005:
Initialize allocated dev and private hw structures
after their respective allocation in 440gx_enet.c
* Patch by Steven Scholz, 10 Jun 2005:
Fix byteorder problems with second argument of "bootm" with
standalone images;
* Add support for HMI1001 board
* Disable "date" and "sntp" commands on TQM866M
* Fix watchdog reset problems on LWMON board
* Patch by Juergen Selent, 17 May 2005:
Add support for Funkwerk VoVPN gateway module.
* Cleanup debug code for MPC8220 FEC driver
* Extend burst mode RAM test program to take a loop count
(0 = infinite)
* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
those boards that use it.
* Patches by Greg Ungerer, 19 May 2005:
- add support for the KS8695P (ARM 922 based) CPU
- add support for the OpenGear CM4008, CM4116 and CM4148 boards
* Patch by Steven Scholz, 19 May 2005:
Add support for CONFIG_SERIAL_TAG on ARM boards
* Add PCI support for Sorcery board.
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
* Fix compile problems caused by new burst mode SDRAM test;
make port pins to trigger logic analyzer configurable
* Fix timer handling on MPC85xx systems
* Fix debug code in omap5912osk flash driver
* Add support for MPC8247 based "IDS8247" board.
* Add support for 2 x TSEC interfaces on the TQM8540 board.
* On LWMON we must use the watchdog to reset the board as the CPU
genereated HRESET pulse is too short to reset the external
circuitry.
* Add test tool to exercise SDRAM accesses in burst mode
(as standalone program, MPC8xx/PowerPC only)
* Increase CFG_MONITOR_LEN for Rattler board to match actual code
size.
* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
added to support LZO and LZARI compression modes (undefined by
default).
* Fix problem with symbolic links in JFFS2 code.
* Use linker ASSERT statement to prevent undetected overlapping of
sections on PPChameleon board; other boards might use this, too.
* Patch by Stefan Roese, 03 May 2005:
Update for P3G4
Fix problems in cmd_universe.c
* Patch by Matthias Fuchs, 03 May 2005:
Added missing variable declaration in cmd_nand.c
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
* Fix INKA4x0: use CS1 as gpio_wkup_6 output
* Fix bug in the SDRAM initialization code for canmb, IceCube and
PM520 boards.
Fix PHY address for canmb board.
* Cleanup serial console baudrate calculation on AT91RM9200;
get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
* Patch by Matthias Fuchs, 18 Apr 2005:
Make PCI target address spaces on PMC405 and CPCI405 boards
configurable via environment variables
* Auto-size RAM on canmb board.
* Add support for canmb board
* Patch by Stefan Roese, 13 Apr 2005:

View File

@@ -394,6 +394,10 @@ N: Rune Torgersen
E: <runet@innovsys.com>
D: Support for Motorola MPC8266ADS board
N: Greg Ungerer
E: greg.ungerer@opengear.com
D: Support for ks8695 CPU, and OpenGear cmXXXX boards
N: David Updegraff
E: dave@cray.com
D: Port to Cray L1 board; DHCP vendor extensions

View File

@@ -230,7 +230,7 @@ Daniel Poirot <dan.poirot@windriver.com>
sbc8240 MPC8240
sbc405 PPC405GP
Stefan Roese <stefan.roese@esd-electronics.com>
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
ADCIOP IOP480 (PPC401)
APC405 PPC405GP
@@ -298,6 +298,8 @@ Jon Loeliger <jdl@freescale.com>
MPC8540ADS MPC8540
MPC8560ADS MPC8560
MPC8541CDS MPC8541
MPC8555CDS MPC8555
Dan Malek <dan@embeddededge.com>
@@ -413,6 +415,12 @@ Andrea Scian <andrea.scian@dave-tech.it>
B2 ARM7TDMI (S3C44B0X)
Greg Ungerer <greg.ungerer@opengear.com>
cm4008 ks8695p
cm4116 ks8695p
cm4148 ks8695p
Alex Z<>pke <azu@sysgo.de>
lart SA1100
@@ -490,7 +498,7 @@ Yasushi Shoji <yashi@atmark-techno.com>
# Board CPU #
#########################################################################
Stefan Roese <stefan.roese@esd-electronics.com>
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
TASREG MCF5249

10
MAKEALL
View File

@@ -129,11 +129,11 @@ LIST_7xx=" \
BAB7xx CPCI750 ELPPC \
"
LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
${LIST_8xx} \
${LIST_824x} ${LIST_8260} \
${LIST_85xx} \
${LIST_4xx} \
LIST_ppc="${LIST_5xx} ${LIST_5xxx} \
${LIST_8xx} \
${LIST_8220} ${LIST_824x} ${LIST_8260} \
${LIST_85xx} \
${LIST_4xx} \
${LIST_74xx} ${LIST_7xx}"
#########################################################################

View File

@@ -227,6 +227,10 @@ PATI_config: unconfig
#########################################################################
## MPC5xxx Systems
#########################################################################
hmi1001_config: unconfig
@./mkconfig hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
Lite5200_LOWBOOT_config \
Lite5200_LOWBOOT08_config \
@@ -987,6 +991,9 @@ gw8260_config: unconfig
hymod_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 hymod
IDS8247_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 ids8247
IPHASE4539_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 iphase4539
@@ -1149,6 +1156,11 @@ TQM8265_AA_config: unconfig
fi
@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > include/config.h
@./mkconfig -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
ZPC1900_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
@@ -1404,6 +1416,12 @@ voiceblue_config: unconfig
fi
@./mkconfig -a voiceblue arm arm925t voiceblue
cm4008_config : unconfig
@./mkconfig $(@:_config=) arm arm920t cm4008 NULL ks8695
cm41xx_config : unconfig
@./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
#########################################################################
## S3C44B0 Systems
#########################################################################
@@ -1651,7 +1669,8 @@ clean:
| xargs rm -f
rm -f examples/hello_world examples/timer \
examples/eepro100_eeprom examples/sched \
examples/mem_to_mem_idma2intr examples/82559_eeprom
examples/mem_to_mem_idma2intr examples/82559_eeprom \
examples/test_burst
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
rm -f tools/mpc86x_clk tools/ncb
rm -f tools/easylogo/easylogo tools/bmp_logo

4
README
View File

@@ -3381,6 +3381,7 @@ Since the number of patches for U-Boot is growing, we need to
establish some rules. Submissions which do not conform to these rules
may be rejected, even when they contain important and valuable stuff.
Patches shall be sent to the u-boot-users mailing list.
When you send a patch, please include the following information with
it:
@@ -3438,3 +3439,6 @@ Notes:
(using #ifdef), and the resulting code with the new feature
disabled must not need more memory than the old code without your
modification.
* Remember that there is a size limit of 40 kB per message on the
u-boot-users mailing list. Compression may help.

View File

@@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := $(BOARD).o flash.o extserial.o
OBJS := $(BOARD).o flash.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)

View File

@@ -1,110 +0,0 @@
/*
* (C) Copyright 2004, Freescale, Inc
* TsiChung Liew, Tsi-Chung.Liew@freescale.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Minimal serial functions needed to use one of the PSC ports
* as serial console interface.
*/
#include <common.h>
#include <mpc8220.h>
#if defined (CONFIG_EXTUART_CONSOLE)
# include <ns16550.h>
# define PADSERIAL_BAUD_115200 0x40
# define PADSERIAL_BAUD_57600 0x20
# define PADSERIAL_BAUD_9600 0
# define PADCARD_FREQ 18432000
const NS16550_t com_port = (NS16550_t) CFG_NS16550_COM1;
int ext_serial_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile u8 *dipswitch = (volatile u8 *) (CFG_CPLD_BASE + 0x1002);
int baud_divisor;
/* Find out the baud rate speed on debug card dip switches */
if (*dipswitch & PADSERIAL_BAUD_115200)
gd->baudrate = 115200;
else if (*dipswitch & PADSERIAL_BAUD_57600)
gd->baudrate = 57600;
else
gd->baudrate = 9600;
/* Debug card frequency */
baud_divisor = PADCARD_FREQ / (16 * gd->baudrate);
NS16550_init (com_port, baud_divisor);
return (0);
}
void ext_serial_putc (const char c)
{
if (c == '\n')
NS16550_putc (com_port, '\r');
NS16550_putc (com_port, c);
}
void ext_serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
int ext_serial_getc (void)
{
return NS16550_getc (com_port);
}
int ext_serial_tstc (void)
{
return NS16550_tstc (com_port);
}
void ext_serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile u8 *dipswitch = (volatile u8 *) (CFG_CPLD_BASE + 0x1002);
int baud_divisor;
/* Find out the baud rate speed on debug card dip switches */
if (*dipswitch & PADSERIAL_BAUD_115200)
gd->baudrate = 115200;
else if (*dipswitch & PADSERIAL_BAUD_57600)
gd->baudrate = 57600;
else
gd->baudrate = 9600;
/* Debug card frequency */
baud_divisor = PADCARD_FREQ / (16 * gd->baudrate);
NS16550_reinit (com_port, baud_divisor);
}
#endif /* CONFIG_EXTUART_CONSOLE */

View File

@@ -2,8 +2,8 @@
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2003
* Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -28,64 +28,212 @@
#include <mpc5xxx.h>
#include <pci.h>
/*****************************************************************************
* initialize SDRAM/DDRAM controller.
* TBD: get data from I2C EEPROM
*****************************************************************************/
#if defined(CONFIG_MPC5200_DDR)
#include "mt46v16m16-75.h"
#else
#include "mt48lc16m32s2-75.h"
#endif
#ifndef CFG_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
/* unlock mode register */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
__asm__ volatile ("sync");
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set mode register: extended mode */
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
__asm__ volatile ("sync");
/* set mode register: reset DLL */
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
__asm__ volatile ("sync");
#endif
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
__asm__ volatile ("sync");
/* auto refresh */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
__asm__ volatile ("sync");
/* set mode register */
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
__asm__ volatile ("sync");
/* normal operation */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
__asm__ volatile ("sync");
}
#endif
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
* use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
* is something else than 0x00000000.
*/
#if defined(CONFIG_MPC5200)
long int initdram (int board_type)
{
ulong dramsize = 0;
ulong dramsize2 = 0;
#ifndef CFG_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
__asm__ volatile ("sync");
/* setup config registers */
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set tap delay */
*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
__asm__ volatile ("sync");
#endif
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
sdram_start(1);
test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
} else {
dramsize = test2;
}
/* memory smaller than 1MB is impossible */
if (dramsize < (1 << 20)) {
dramsize = 0;
}
/* set SDRAM CS0 size according to the amount of RAM found */
if (dramsize > 0) {
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
} else {
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
}
/* let SDRAM CS1 start right after CS0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
/* find RAM size using SDRAM CS1 only */
if (!dramsize)
sdram_start(0);
test2 = test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize) {
sdram_start(1);
test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
}
if (test1 > test2) {
sdram_start(0);
dramsize2 = test1;
} else {
dramsize2 = test2;
}
/* memory smaller than 1MB is impossible */
if (dramsize2 < (1 << 20)) {
dramsize2 = 0;
}
/* set SDRAM CS1 size according to the amount of RAM found */
if (dramsize2 > 0) {
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
} else {
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
}
#else /* CFG_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
if (dramsize >= 0x13) {
dramsize = (1 << (dramsize - 0x13)) << 20;
} else {
dramsize = 0;
}
/* retrieve size of memory connected to SDRAM CS1 */
dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
if (dramsize2 >= 0x13) {
dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
} else {
dramsize2 = 0;
}
#endif /* CFG_RAMBOOT */
return dramsize + dramsize2;
}
#elif defined(CONFIG_MGT5100)
long int initdram (int board_type)
{
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
#if 0
ulong t;
ulong tap_del;
#endif
ulong test1, test2;
#define MODE_EN 0x80000000
#define SOFT_PRE 2
#define SOFT_REF 4
/* configure SDRAM start/end */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = (CFG_SDRAM_BASE & 0xFFF00000) | CFG_DRAM_RAM_SIZE;
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x8000000;
/* setup and enable SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
*(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
*(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
__asm__ volatile ("sync");
/* setup config registers */
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = CFG_DRAM_CONFIG1;
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = CFG_DRAM_CONFIG2;
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
/* unlock mode register */
*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN;
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
#ifdef CFG_DRAM_DDR
/* set extended mode register */
*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_EMODE;
#endif
/* set mode register */
*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE | 0x0400;
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_PRE;
/* auto refresh */
*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL | MODE_EN | SOFT_REF;
/* set mode register */
*(vu_short *)MPC5XXX_SDRAM_MODE = CFG_DRAM_MODE;
/* normal operation */
*(vu_long *)MPC5XXX_SDRAM_CTRL = CFG_DRAM_CONTROL;
/* write default TAP delay */
*(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24;
/* address select register */
*(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
__asm__ volatile ("sync");
/* find RAM size */
sdram_start(0);
test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
sdram_start(1);
test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
} else {
dramsize = test2;
}
/* set SDRAM end address according to size */
*(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
#else /* CFG_RAMBOOT */
/* Retrieve amount of SDRAM available */
dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
#endif /* CFG_RAMBOOT */
dramsize = ((1 << (*(vu_long *)MPC5XXX_SDRAM_CS0CFG - 0x13)) << 20) +
((1 << (*(vu_long *)MPC5XXX_SDRAM_CS1CFG - 0x13)) << 20);
/* return total ram size */
return dramsize;
}
/*****************************************************************************
* print board identification
*****************************************************************************/
#else
#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
#endif
int checkboard (void)
{
puts ("Board: CANMB\n");

View File

@@ -0,0 +1,43 @@
/*
* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#define SDRAM_DDR 0 /* is SDR */
#if defined(CONFIG_MPC5200)
/* Settings for XLB = 132 MHz */
#define SDRAM_MODE 0x00CD0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xD2322800
#define SDRAM_CONFIG2 0x8AD70000
#elif defined(CONFIG_MGT5100)
/* Settings for XLB = 66 MHz */
#define SDRAM_MODE 0x008D0000
#define SDRAM_CONTROL 0x504F0000
#define SDRAM_CONFIG1 0xC2222600
#define SDRAM_CONFIG2 0x88B70004
#define SDRAM_ADDRSEL 0x02000000
#else
#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
#endif

46
board/cm4008/Makefile Normal file
View File

@@ -0,0 +1,46 @@
#
# (C) Copyright 2000, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := cm4008.o flash.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-include .depend
#########################################################################

101
board/cm4008/cm4008.c Normal file
View File

@@ -0,0 +1,101 @@
/*
* (C) Copyright 2005
* Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/platform.h>
/* ------------------------------------------------------------------------- */
#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations
*/
int env_flash_cmdline (void)
{
unsigned char *sp = (unsigned char *) 0x0201c020;
unsigned char *ep;
int len;
/* Check if "erase" push button is depressed */
if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
printf("### Entering network recovery mode...\n");
setenv("bootargs", "console=ttyAM0,115200 mem=16M initrd=0x400000,6M root=/dev/ram0");
setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
setenv("bootdelay", "2");
return 0;
}
/* Check for flash based kernel boot args to use as default */
for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
;
if ((len > 0) && (len <1024))
setenv("bootargs", sp);
return 0;
}
int board_late_init (void)
{
return 0;
}
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number of CM4008 */
gd->bd->bi_arch_number = 624;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
/* power down all but port 0 on the switch */
ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
return 0;
}
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return (0);
}

1
board/cm4008/config.mk Normal file
View File

@@ -0,0 +1 @@
TEXT_BASE = 0x00f00000

409
board/cm4008/flash.c Normal file
View File

@@ -0,0 +1,409 @@
/*
* (C) Copyright 2005
* Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
*
* (C) Copyright 2001
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <linux/byteorder/swab.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define mb() __asm__ __volatile__ ("" : : : "memory")
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
static int write_data (flash_info_t * info, ulong dest, unsigned char data);
static void flash_get_offsets (ulong base, flash_info_t * info);
void inline spin_wheel (void);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
int i;
ulong size = 0;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
break;
case 1:
/* ignore for now */
flash_info[i].flash_id = FLASH_UNKNOWN;
break;
default:
panic ("configured too many flash banks!\n");
break;
}
size += flash_info[i].size;
}
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
CFG_FLASH_BASE,
CFG_FLASH_BASE + _bss_start - _armboot_start,
&flash_info[0]);
return size;
}
/*-----------------------------------------------------------------------
*/
static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN)
return;
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
info->protect[i] = 0;
}
}
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
printf ("INTEL ");
break;
default:
printf ("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F128J3A:
printf ("28F128J3A\n");
break;
default:
printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i], info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
return;
}
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
{
volatile unsigned char value;
/* Write auto select command: read Manufacturer ID */
addr[0x5555] = 0xAA;
addr[0x2AAA] = 0x55;
addr[0x5555] = 0x90;
mb ();
value = addr[0];
switch (value) {
case (unsigned char)INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
addr[0] = 0xFF; /* restore read mode */
return (0); /* no or unknown flash */
}
mb ();
value = addr[2]; /* device ID */
switch (value) {
case (unsigned char)INTEL_ID_28F640J3A:
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
break; /* => 8 MB */
case (unsigned char)INTEL_ID_28F128J3A:
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
break; /* => 16 MB */
default:
info->flash_id = FLASH_UNKNOWN;
break;
}
if (info->sector_count > CFG_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
info->sector_count, CFG_MAX_FLASH_SECT);
info->sector_count = CFG_MAX_FLASH_SECT;
}
addr[0] = 0xFF; /* restore read mode */
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int flag, prot, sect;
ulong type;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
type = (info->flash_id & FLASH_VENDMASK);
if ((type != FLASH_MAN_INTEL)) {
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot)
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
else
printf ("\n");
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
volatile unsigned char *addr;
unsigned char status;
printf ("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
addr = (volatile unsigned char *) (info->start[sect]);
*addr = 0x50; /* clear status register */
*addr = 0x20; /* erase setup */
*addr = 0xD0; /* erase confirm */
while (((status = *addr) & 0x80) != 0x80) {
if (get_timer_masked () >
CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0xB0; /* suspend erase */
*addr = 0xFF; /* reset to read mode */
rcode = 1;
break;
}
}
*addr = 0x50; /* clear status register cmd */
*addr = 0xFF; /* resest to read mode */
printf (" done\n");
}
}
return rcode;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
* 4 - Flash not identified
*/
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp;
unsigned char data;
int count, i, l, rc, port_width;
if (info->flash_id == FLASH_UNKNOWN)
return 4;
wp = addr;
port_width = 1;
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i = 0, cp = wp; i < l; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
for (; i < port_width && cnt > 0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt == 0 && i < port_width; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
if ((rc = write_data (info, wp, data)) != 0) {
return (rc);
}
wp += port_width;
}
/*
* handle word aligned part
*/
count = 0;
while (cnt >= port_width) {
data = 0;
for (i = 0; i < port_width; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_data (info, wp, data)) != 0) {
return (rc);
}
wp += port_width;
cnt -= port_width;
if (count++ > 0x800) {
spin_wheel ();
count = 0;
}
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i < port_width; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
return (write_data (info, wp, data));
}
/*-----------------------------------------------------------------------
* Write a word or halfword to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_data (flash_info_t * info, ulong dest, unsigned char data)
{
volatile unsigned char *addr = (volatile unsigned char *) dest;
ulong status;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
printf ("not erased at %08lx (%lx)\n", (ulong) addr,
(ulong) * addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
*addr = 0x40; /* write setup */
*addr = data;
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
/* wait while polling the status register */
while (((status = *addr) & 0x80) != 0x80) {
if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
*addr = 0xFF; /* restore read mode */
return (1);
}
}
*addr = 0xFF; /* restore read mode */
return (0);
}
void inline spin_wheel (void)
{
static int p = 0;
static char w[] = "\\/-";
printf ("\010%c", w[p]);
(++p == 3) ? (p = 0) : 0;
}

55
board/cm4008/u-boot.lds Normal file
View File

@@ -0,0 +1,55 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
cpu/arm920t/start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(.rodata) }
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : { *(.got) }
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
_end = .;
}

46
board/cm41xx/Makefile Normal file
View File

@@ -0,0 +1,46 @@
#
# (C) Copyright 2000, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := cm41xx.o flash.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $^
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-include .depend
#########################################################################

101
board/cm41xx/cm41xx.c Normal file
View File

@@ -0,0 +1,101 @@
/*
* (C) Copyright 2005
* Greg Ungerer, OpenGear Inc, <greg.ungerer@opengear.com>
*
* (C) Copyright 2002
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/platform.h>
/* ------------------------------------------------------------------------- */
#define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a)))
#define ks8695_write(a,b) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) = (b)
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations
*/
int env_flash_cmdline (void)
{
unsigned char *sp = (unsigned char *) 0x0201c020;
unsigned char *ep;
int len;
/* Check if "erase" push button is depressed */
if ((ks8695_read(KS8695_GPIO_DATA) & 0x8) == 0) {
printf("### Entering network recovery mode...\n");
setenv("bootargs", "console=ttyAM0,115200 mem=32M initrd=0x400000,8M root=/dev/ram0");
setenv("bootcmd", "bootp 0x400000; gofsk 0x400000");
setenv("bootdelay", "2");
return 0;
}
/* Check for flash based kernel boot args to use as default */
for (ep = sp, len = 0; ((len < 1024) && (*ep != 0)); ep++, len++)
;
if ((len > 0) && (len <1024))
setenv("bootargs", sp);
return 0;
}
int board_late_init (void)
{
return 0;
}
int board_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
/* arch number of CM41xx */
gd->bd->bi_arch_number = 672;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x00000100;
/* power down all but port 0 on the switch */
ks8695_write(KS8695_SWITCH_LPPM12, 0x00000005);
ks8695_write(KS8695_SWITCH_LPPM34, 0x00050005);
return 0;
}
int dram_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
return (0);
}

1
board/cm41xx/config.mk Normal file
View File

@@ -0,0 +1 @@
TEXT_BASE = 0x00f00000

409
board/cm41xx/flash.c Normal file
View File

@@ -0,0 +1,409 @@
/*
* (C) Copyright 2005
* Greg Ungerer, OpenGear Inc, greg.ungerer@opengear.com
*
* (C) Copyright 2001
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <linux/byteorder/swab.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#define mb() __asm__ __volatile__ ("" : : : "memory")
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (unsigned char * addr, flash_info_t * info);
static int write_data (flash_info_t * info, ulong dest, unsigned char data);
static void flash_get_offsets (ulong base, flash_info_t * info);
void inline spin_wheel (void);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
int i;
ulong size = 0;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
flash_get_size ((unsigned char *) PHYS_FLASH_1, &flash_info[i]);
flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
break;
case 1:
/* ignore for now */
flash_info[i].flash_id = FLASH_UNKNOWN;
break;
default:
panic ("configured too many flash banks!\n");
break;
}
size += flash_info[i].size;
}
/* Protect monitor and environment sectors
*/
flash_protect (FLAG_PROTECT_SET,
CFG_FLASH_BASE,
CFG_FLASH_BASE + _bss_start - _armboot_start,
&flash_info[0]);
return size;
}
/*-----------------------------------------------------------------------
*/
static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN)
return;
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
info->protect[i] = 0;
}
}
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
printf ("INTEL ");
break;
default:
printf ("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F128J3A:
printf ("28F128J3A\n");
break;
default:
printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i], info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
return;
}
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (unsigned char * addr, flash_info_t * info)
{
volatile unsigned char value;
/* Write auto select command: read Manufacturer ID */
addr[0x5555] = 0xAA;
addr[0x2AAA] = 0x55;
addr[0x5555] = 0x90;
mb ();
value = addr[0];
switch (value) {
case (unsigned char)INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
addr[0] = 0xFF; /* restore read mode */
return (0); /* no or unknown flash */
}
mb ();
value = addr[2]; /* device ID */
switch (value) {
case (unsigned char)INTEL_ID_28F640J3A:
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
break; /* => 8 MB */
case (unsigned char)INTEL_ID_28F128J3A:
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
break; /* => 16 MB */
default:
info->flash_id = FLASH_UNKNOWN;
break;
}
if (info->sector_count > CFG_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
info->sector_count, CFG_MAX_FLASH_SECT);
info->sector_count = CFG_MAX_FLASH_SECT;
}
addr[0] = 0xFF; /* restore read mode */
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int flag, prot, sect;
ulong type;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
type = (info->flash_id & FLASH_VENDMASK);
if ((type != FLASH_MAN_INTEL)) {
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot)
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
else
printf ("\n");
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
volatile unsigned char *addr;
unsigned char status;
printf ("Erasing sector %2d ... ", sect);
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
addr = (volatile unsigned char *) (info->start[sect]);
*addr = 0x50; /* clear status register */
*addr = 0x20; /* erase setup */
*addr = 0xD0; /* erase confirm */
while (((status = *addr) & 0x80) != 0x80) {
if (get_timer_masked () >
CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = 0xB0; /* suspend erase */
*addr = 0xFF; /* reset to read mode */
rcode = 1;
break;
}
}
*addr = 0x50; /* clear status register cmd */
*addr = 0xFF; /* resest to read mode */
printf (" done\n");
}
}
return rcode;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
* 4 - Flash not identified
*/
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp;
unsigned char data;
int count, i, l, rc, port_width;
if (info->flash_id == FLASH_UNKNOWN)
return 4;
wp = addr;
port_width = 1;
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i = 0, cp = wp; i < l; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
for (; i < port_width && cnt > 0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt == 0 && i < port_width; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
if ((rc = write_data (info, wp, data)) != 0) {
return (rc);
}
wp += port_width;
}
/*
* handle word aligned part
*/
count = 0;
while (cnt >= port_width) {
data = 0;
for (i = 0; i < port_width; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_data (info, wp, data)) != 0) {
return (rc);
}
wp += port_width;
cnt -= port_width;
if (count++ > 0x800) {
spin_wheel ();
count = 0;
}
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i < port_width; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
return (write_data (info, wp, data));
}
/*-----------------------------------------------------------------------
* Write a word or halfword to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_data (flash_info_t * info, ulong dest, unsigned char data)
{
volatile unsigned char *addr = (volatile unsigned char *) dest;
ulong status;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
printf ("not erased at %08lx (%lx)\n", (ulong) addr,
(ulong) * addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
*addr = 0x40; /* write setup */
*addr = data;
/* arm simple, non interrupt dependent timer */
reset_timer_masked ();
/* wait while polling the status register */
while (((status = *addr) & 0x80) != 0x80) {
if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
*addr = 0xFF; /* restore read mode */
return (1);
}
}
*addr = 0xFF; /* restore read mode */
return (0);
}
void inline spin_wheel (void)
{
static int p = 0;
static char w[] = "\\/-";
printf ("\010%c", w[p]);
(++p == 3) ? (p = 0) : 0;
}

55
board/cm41xx/u-boot.lds Normal file
View File

@@ -0,0 +1,55 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
. = 0x00000000;
. = ALIGN(4);
.text :
{
cpu/arm920t/start.o (.text)
*(.text)
}
. = ALIGN(4);
.rodata : { *(.rodata) }
. = ALIGN(4);
.data : { *(.data) }
. = ALIGN(4);
.got : { *(.got) }
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
. = ALIGN(4);
__bss_start = .;
.bss : { *(.bss) }
_end = .;
}

View File

@@ -140,6 +140,7 @@ SECTIONS
*(COMMON)
}
ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
. = 0xFFFF8000;
.ppcenv :
{

View File

@@ -6,26 +6,26 @@
0x00,0x00,0x03,0x09,0x03,0xff,0xfd,0x03,0xff,0xfd,0x04,0x00,0x00,0x00,0x00,0x02,
0x08,0xea,0x08,0x00,0x00,0x00,0x22,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x00,
0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x00,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x08,0x00,0x01,0x00,
0x00,0x04,0x38,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x08,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x00,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x20,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x24,0x38,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x00,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x2c,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x00,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x44,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x48,0x00,0x01,0x00,0x00,0x00,
0x14,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x48,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x00,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x00,0x50,0x00,0x03,0x00,0x00,
0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x00,0x80,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
0x00,0x00,0x84,0x38,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
0x09,0x00,0x00,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x8c,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x00,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xa4,
0x38,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xa8,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xa8,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x00,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,
0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xc0,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x00,0xc4,0x14,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x00,0x00,0x01,0x09,0x00,0x00,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x00,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x00,0xcc,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x00,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
@@ -128,34 +128,34 @@
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x04,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x04,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x04,0xd0,0x00,0x03,0x00,0x00,0x00,
0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x05,0x00,0x80,0x01,0x00,0x00,
0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x05,0x00,0xc0,0x11,0x00,0x00,
0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
0x05,0x04,0x40,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x05,0x08,0x00,0x31,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x0c,0x80,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x05,0x20,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x24,0x04,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x05,0x2c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x30,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x40,0xa0,0x11,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x05,0x44,0xe8,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,
0x48,0x40,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x4c,0x80,0x11,0x00,0x00,
0x05,0x04,0xc0,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x05,0x08,0x40,0x31,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x0c,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x10,0x80,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x05,0x20,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x24,0x00,
0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x05,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x30,
0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x40,0x20,0x19,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x05,0x44,0x20,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,
0x48,0x48,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x4c,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x05,0x50,0x80,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
0x00,0x05,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0x84,0x04,0x31,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0x88,0xc0,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x05,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x90,
0x05,0x50,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
0x00,0x05,0x80,0x00,0x21,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0x84,0x00,0x11,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0x88,0x80,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x05,0x8c,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0x90,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xa0,0x04,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x05,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,
0xa8,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xac,0x00,0x01,0x00,0x00,
0xa8,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xac,0x00,0x11,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x05,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x05,0xc0,0x08,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xc4,0x00,0x09,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xc8,0x80,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x05,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
0x05,0xc0,0xc8,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xc4,0x08,0x09,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x05,0xc8,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x05,0xcc,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x05,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x06,0x03,0x02,0x01,0x00,0x00,0x00,0x00,
0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x06,0x07,
0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x06,
0x42,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x06,
0x0b,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x0f,0x02,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x06,0x13,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x06,0x23,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x27,0x03,0x01,0x00,
@@ -165,8 +165,8 @@
0x09,0x00,0x06,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x48,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x06,0x50,
0x80,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x06,
0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x06,
0x80,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
0x00,0x00,0x00,0x09,0x00,0x06,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
0x00,0x00,0x00,0x00,0x09,0x00,0x06,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x06,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0x90,0x00,0x01,
@@ -175,10 +175,10 @@
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xac,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x06,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xc0,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,0xc4,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x06,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,
0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
0x00,0x01,0x09,0x00,0x06,0xc8,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x06,
0xcc,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
0x00,0x00,0x00,0x09,0x00,0x06,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
0x00,0x00,0x00,0x03,0x09,0x00,0x07,0x03,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
0x00,0x00,0x00,0x03,0x09,0x00,0x07,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x07,0x07,0x02,0x01,
0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x07,0x0b,0x02,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x07,0x0f,0x02,0x01,0x00,0x00,0x00,0x00,
@@ -207,7 +207,7 @@
0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x08,0x04,0x00,0x01,0x00,0x00,
0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x08,0x08,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x0e,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x08,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x22,0x01,0x01,
0x00,0x08,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x23,0x01,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x26,0x01,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x08,0x28,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x2e,0x01,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x08,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
@@ -258,8 +258,8 @@
0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x0a,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x10,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x20,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x0a,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x28,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x2e,0x00,0x01,0x00,0x00,0x00,
0x01,0x09,0x00,0x0a,0x26,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x28,
0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x2c,0x01,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x0a,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,
0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0x44,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x0a,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
@@ -278,13 +278,13 @@
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0a,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0a,0xd0,0x00,
0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0b,0x00,
0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
0x00,0x00,0x09,0x00,0x0b,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,
0x00,0x00,0x00,0x09,0x00,0x0b,0x0a,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x0b,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x10,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x20,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x22,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x0b,0x26,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x28,0x01,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x2c,0x01,0x01,0x00,0x00,0x00,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x2e,0x01,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x0b,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x40,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x44,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x0b,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0b,0x4c,
@@ -327,12 +327,12 @@
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0c,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x0c,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,
0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0c,0xd0,0x00,0x03,0x00,0x00,0x00,
0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0d,0x03,0x46,0x01,0x00,0x00,
0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0d,0x03,0x02,0x01,0x00,0x00,
0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
0x0d,0x07,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x0d,0x0b,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x0f,0x02,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x13,0x02,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x0d,0x23,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x27,0x03,
0x09,0x00,0x0d,0x23,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x27,0x07,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x2b,0x03,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x0d,0x2f,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x30,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x40,0x00,0x01,0x00,0x00,0x00,
@@ -340,7 +340,7 @@
0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x4c,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x0d,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
0x00,0x0d,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
0x00,0x0d,0x80,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0d,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0d,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x0d,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0d,0x90,
@@ -354,27 +354,27 @@
0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0d,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0e,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x0e,0x04,
0x40,0x11,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0e,
0x08,0x80,0x31,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x0c,0x80,0x01,0x00,0x00,
0xc0,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0e,
0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x0c,0x80,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x0e,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x0e,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x24,0x04,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x28,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
0x0e,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x24,0x00,0x11,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x0e,0x2c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x30,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x40,0x48,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x0e,0x44,0x20,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x48,0x80,
0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x4c,0x80,0x11,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x40,0x60,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x0e,0x44,0x48,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x48,0xc0,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x4c,0x80,0x11,0x00,0x00,0x00,0x00,
0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x0e,0x50,
0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x0e,
0x80,0x80,0x31,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
0x00,0x00,0x00,0x09,0x00,0x0e,0x84,0x84,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
0x00,0x00,0x00,0x00,0x09,0x00,0x0e,0x88,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
0x00,0x00,0x00,0x09,0x00,0x0e,0x84,0x00,0x21,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
0x00,0x00,0x00,0x00,0x09,0x00,0x0e,0x88,0x40,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x0e,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0x90,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xa0,0x04,0x11,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x0e,0xa4,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xa8,0x00,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x0e,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xa8,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xac,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x0e,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xc0,
0xa0,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xc4,0xc8,0x11,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x0e,0xc8,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,0xc4,0xa0,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x0e,0xc8,0x08,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x0e,
0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
0x00,0x00,0x00,0x09,0x00,0x0e,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
0x00,0x00,0x00,0x03,0x09,0x00,0x0f,0x00,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
@@ -403,17 +403,17 @@
0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,
0x00,0x09,0x00,0x0f,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
0x00,0x03,0x09,0x00,0x10,0x01,0x82,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,
0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x04,0x82,0x01,0x00,0x00,
0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x05,0x82,0x01,0x00,0x00,
0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x0a,0x82,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x0e,0x82,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x10,0x12,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x20,0x03,0x11,
0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x0c,0x82,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x10,0x12,0x82,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x20,0x03,0x11,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x26,0x03,0x11,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x10,0x2a,0x03,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x2c,0x01,
0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x30,0x00,0x11,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x10,0x40,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x44,
0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0x48,0x00,0x11,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x10,0x4c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x50,0x00,0x03,0x00,0x00,
0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x10,0x50,0x00,0x13,0x00,0x00,
0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x10,0x80,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
0x00,0x10,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
@@ -427,31 +427,31 @@
0x10,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x10,0xcc,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x10,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
0x09,0x00,0x11,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x04,0x04,0x01,0x00,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x08,0x00,0x11,0x00,0x00,0x00,
0x09,0x00,0x11,0x00,0xc0,0x11,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x04,0x00,0x11,0x00,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x08,0x80,0x21,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x11,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,
0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x20,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x11,0x24,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x11,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x2c,0x00,0x01,0x00,
0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x20,0x00,0x11,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x11,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x11,0x28,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x2c,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x11,0x40,0xa0,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x44,0x40,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x48,0x80,0x09,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x11,0x4c,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x50,0x80,0x03,0x00,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x11,0x80,0x00,0x11,0x00,0x00,0x00,
0x00,0x11,0x40,0x08,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x44,0x20,0x09,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x48,0xc0,0x11,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x11,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x11,0x80,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x11,
0x84,0x80,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x11,0x88,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x8c,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x11,0xa0,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xa4,0x00,0x11,
0x84,0x00,0x21,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x11,0x88,0x40,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x8c,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x11,0x90,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x11,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xa4,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x11,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xb0,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xc0,0x40,0x09,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x11,0xc4,0x28,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xc8,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xcc,0x00,0x01,0x00,0x00,0x00,
0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xc0,0x20,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x11,0xc4,0xc0,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xc8,
0x08,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x11,0xcc,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x11,
0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
0xd0,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
0x12,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
0x00,0x00,0x00,0x00,0x09,0x00,0x12,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,
0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x12,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
@@ -493,7 +493,7 @@
0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x13,0x84,0x00,0x01,0x00,
0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x13,0x88,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x13,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xa0,0x00,
0x09,0x00,0x13,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xa2,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xa4,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x13,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xac,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x13,0xb0,0x00,0x01,0x00,0x00,0x00,
@@ -503,8 +503,8 @@
0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x13,0xd0,0x00,0x03,0x00,
0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x14,0x00,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,
0x09,0x00,0x14,0x05,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
0x00,0x09,0x00,0x14,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x0c,
0x09,0x00,0x14,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
0x00,0x09,0x00,0x14,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x0e,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x10,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x14,0x23,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,
0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x14,0x28,0x00,0x01,0x00,0x00,
@@ -528,55 +528,55 @@
0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x14,0xd0,0x00,0x03,0x00,0x00,0x00,
0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x15,0x00,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,
0x15,0x04,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x15,0x08,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x0c,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x15,0x20,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x24,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x28,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x15,0x2c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x30,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x40,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x15,0x44,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,
0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x4c,0x00,0x01,0x00,0x00,
0x15,0x04,0x00,0x11,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x15,0x08,0xc0,0x31,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x0c,0x80,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x10,0x80,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x15,0x20,0x04,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x24,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x28,0x00,0x11,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x15,0x2c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x30,
0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x40,0x28,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x15,0x44,0x28,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,
0x48,0x48,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x4c,0x00,0x11,0x00,0x00,
0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x15,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
0x00,0x15,0x80,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x15,0x84,0x00,0xc1,0x00,0x00,0x00,0x00,0x00,
0x15,0x50,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,
0x00,0x15,0x80,0xc0,0x31,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,
0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x15,0x84,0xc0,0x21,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x15,0x88,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x15,0x8c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0x90,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xa0,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x15,0xa4,0x80,0xe1,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xa0,0x00,0x11,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x15,0xa4,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,
0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xac,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x15,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x15,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xc4,0x00,0x61,0x00,
0x15,0xc0,0xc0,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xc4,0x40,0x11,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x15,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x15,0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
0x00,0x15,0xcc,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,
0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x15,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x16,0x02,0x06,0x01,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x16,0x02,0x02,0x01,0x00,0x00,0x00,0x00,
0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x16,0x06,
0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x16,
0x0b,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x0d,0x02,0x01,0x00,0x00,
0x3a,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x16,
0x0b,0x42,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x0d,0x02,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x16,0x13,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x16,0x20,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x27,0x03,0x01,0x00,
0x16,0x20,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x27,0x3b,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x2b,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x16,0x2d,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x30,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x40,0x00,0x09,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x16,0x44,0x00,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x48,0x00,
0x09,0x00,0x16,0x44,0x14,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x48,0x00,
0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x16,0x50,
0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x16,
0x83,0x42,0x11,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
0x83,0x02,0x11,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,
0x00,0x00,0x00,0x09,0x00,0x16,0x87,0x02,0x11,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
0x00,0x00,0x00,0x00,0x09,0x00,0x16,0x8b,0x02,0x11,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x16,0x8f,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0x93,0x02,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xa3,0x03,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x16,0xa7,0x03,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xab,0x03,
0x09,0x00,0x16,0xa7,0x07,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xab,0x03,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xaf,0x01,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x16,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xc0,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xc4,0x80,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x16,0xc8,0x40,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,0xc4,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x16,0xc8,0x08,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x16,
0xcc,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,
0x00,0x00,0x00,0x09,0x00,0x16,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,
0x00,0x00,0x00,0x03,0x09,0x00,0x17,0x03,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
0x00,0x00,0x00,0x03,0x09,0x00,0x17,0x02,0x02,0x01,0x00,0x00,0x00,0x00,0x01,0x01,
0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x17,0x07,0x02,0x01,
0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x17,0x0b,0x02,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x0f,0x02,0x01,0x00,0x00,0x00,0x00,
@@ -593,7 +593,7 @@
0x00,0x09,0x00,0x17,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,
0x00,0x00,0x09,0x00,0x17,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,
0x8e,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0x90,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x17,0xa2,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x00,0x00,0x01,0x09,0x00,0x17,0xa3,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x17,0xa6,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xa8,0x01,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xae,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x17,0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x17,0xc0,0x00,0x01,
@@ -618,9 +618,9 @@
0x00,0x18,0x84,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
0x09,0x00,0x18,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x8c,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x18,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xa4,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xa8,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x18,0xae,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,
0x01,0x09,0x00,0x18,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xa6,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xa8,0x01,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x18,0xac,0x01,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,
0xb0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xc0,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x18,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x18,0xc8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x18,0xcc,0x00,0x01,0x00,
@@ -658,16 +658,16 @@
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x20,0x00,0x11,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x1a,0x24,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x28,
0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x2c,0x00,0x11,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x1a,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,
0x00,0x01,0x09,0x00,0x1a,0x30,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,
0x40,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x44,0x00,0x11,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x1a,0x48,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x1a,0x4c,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,
0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x50,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,
0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x50,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,
0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x1a,0x82,0x81,0x01,0x00,0x00,0x00,0x00,0x01,
0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x84,0x80,
0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x1a,0x88,
0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0x8c,0x80,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x1a,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,
0x00,0x01,0x09,0x00,0x1a,0x90,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,
0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0xa4,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x1a,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x1a,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x1a,0xb0,0x00,0x01,0x00,
@@ -1006,7 +1006,7 @@
0x00,0x28,0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x20,0x00,0x11,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x24,0x00,0x11,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x28,0x28,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x2c,0x00,
0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x30,0x00,0x01,0x00,0x00,0x00,0x00,
0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x30,0x00,0x11,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x28,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x44,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x48,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x28,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,
@@ -1015,7 +1015,7 @@
0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,
0x00,0x28,0x84,0x80,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,
0x09,0x00,0x28,0x88,0x80,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x8c,0x80,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x90,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0x90,0x80,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x28,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0xa4,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0xa8,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x28,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,
@@ -1023,30 +1023,30 @@
0x00,0x00,0x01,0x09,0x00,0x28,0xc4,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x28,0xc8,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x28,0xcc,0x00,0x11,0x00,
0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,
0x00,0x28,0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
0x09,0x00,0x29,0x00,0x80,0x31,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x04,0x84,0x31,0x00,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x08,0xc0,0x01,0x00,0x00,0x00,
0x00,0x28,0xd0,0x00,0x13,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,
0x09,0x00,0x29,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,
0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x04,0x00,0x01,0x00,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x08,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x29,0x0c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,
0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x20,0x04,0x11,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x29,0x24,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x29,0x28,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x2c,0x00,0x01,0x00,
0x10,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x20,0x00,0x01,0x00,0x00,
0x00,0x00,0x01,0x09,0x00,0x29,0x24,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,
0x29,0x28,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x2c,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x30,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x29,0x40,0xe8,0x19,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x44,0xe8,0x19,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x48,0xc0,0x11,0x00,0x00,0x00,0x00,0x01,
0x00,0x29,0x40,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x44,0x00,0x01,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x48,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x29,0x4c,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x4e,0x20,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x50,0x80,0x03,0x00,0x00,0x00,0x00,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,0x50,0x00,0x03,0x00,0x00,0x00,0x00,
0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,0x29,0x80,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x09,0x00,0x29,
0x84,0x40,0x01,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x29,0x88,0x00,0x31,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x8c,0x80,0x01,0x00,
0x84,0x00,0xc1,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,
0x29,0x88,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x8c,0x00,0x01,0x00,
0x00,0x00,0x00,0x01,0x09,0x00,0x29,0x90,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,
0x00,0x29,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xa4,0x04,0x01,
0x00,0x29,0xa0,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xa4,0x80,0xe1,
0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xa8,0x00,0x01,0x00,0x00,0x00,0x00,0x01,
0x09,0x00,0x29,0xac,0x00,0x11,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xb0,0x00,
0x09,0x00,0x29,0xac,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xb0,0x00,
0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xc0,0x00,0x01,0x00,0x00,0x00,0x00,
0x01,0x09,0x00,0x29,0xc4,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xc8,
0x00,0x09,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xcc,0x80,0x11,0x00,0x00,0x00,
0x01,0x09,0x00,0x29,0xc4,0x00,0x61,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xc8,
0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x09,0x00,0x29,0xcc,0x00,0x01,0x00,0x00,0x00,
0x00,0x01,0x04,0x00,0x00,0x4e,0x20,0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x29,
0xd0,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x03,0x09,0x00,
0x2a,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x04,
@@ -1351,25 +1351,25 @@
0x01,0x04,0x00,0x00,0x00,0x00,0x02,0x08,0xe8,0x08,0x00,0x00,0x00,0x06,0x01,0x00,
0x09,0x05,0x00,0x02,0x08,0xee,0x04,0x00,0x00,0x00,0x01,0x08,0x00,0x00,0x00,0x22,
0x01,0x00,0x00,0x00,0x00,0x00,0x09,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,
0x00,0x01,0x03,0xff,0xff,0xff,0xff,0x09,0x00,0x00,0x04,0x00,0x03,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x00,0x08,0x00,0x03,0x00,0x00,0x04,0x00,0x01,0x09,0x00,0x00,
0x00,0x01,0x03,0xff,0xff,0xff,0xff,0x09,0x00,0x00,0x04,0x38,0x03,0x00,0x00,0x00,
0x00,0x01,0x09,0x00,0x00,0x08,0x00,0x03,0x00,0x00,0x04,0x38,0x01,0x09,0x00,0x00,
0x0c,0x00,0x03,0x00,0x00,0x08,0x00,0x01,0x09,0x00,0x00,0x10,0x00,0x03,0x00,0x00,
0x0c,0x00,0x01,0x09,0x00,0x00,0x20,0x00,0x03,0x00,0x00,0x10,0x00,0x01,0x09,0x00,
0x00,0x24,0x00,0x03,0x00,0x00,0x20,0x00,0x01,0x09,0x00,0x00,0x28,0x00,0x03,0x00,
0x00,0x24,0x00,0x01,0x09,0x00,0x00,0x2c,0x00,0x03,0x00,0x00,0x28,0x00,0x01,0x09,
0x00,0x24,0x38,0x03,0x00,0x00,0x20,0x00,0x01,0x09,0x00,0x00,0x28,0x00,0x03,0x00,
0x00,0x24,0x38,0x01,0x09,0x00,0x00,0x2c,0x00,0x03,0x00,0x00,0x28,0x00,0x01,0x09,
0x00,0x00,0x30,0x00,0x03,0x00,0x00,0x2c,0x00,0x01,0x09,0x00,0x00,0x40,0x00,0x03,
0x00,0x00,0x30,0x00,0x01,0x09,0x00,0x00,0x44,0x00,0x03,0x00,0x00,0x40,0x00,0x01,
0x09,0x00,0x00,0x48,0x00,0x03,0x00,0x00,0x44,0x00,0x01,0x09,0x00,0x00,0x4c,0x00,
0x00,0x00,0x30,0x00,0x01,0x09,0x00,0x00,0x44,0x14,0x03,0x00,0x00,0x40,0x00,0x01,
0x09,0x00,0x00,0x48,0x00,0x03,0x00,0x00,0x44,0x14,0x01,0x09,0x00,0x00,0x4c,0x00,
0x03,0x00,0x00,0x48,0x00,0x01,0x09,0x00,0x00,0x50,0x00,0x03,0x00,0x00,0x4c,0x00,
0x01,0x09,0x00,0x00,0x80,0x00,0x03,0x00,0x00,0x50,0x00,0x01,0x09,0x00,0x00,0x84,
0x38,0x03,0x00,0x00,0x80,0x00,0x01,0x09,0x00,0x00,0x88,0x00,0x03,0x00,0x00,0x84,
0x38,0x01,0x09,0x00,0x00,0x8c,0x00,0x03,0x00,0x00,0x88,0x00,0x01,0x09,0x00,0x00,
0x00,0x03,0x00,0x00,0x80,0x00,0x01,0x09,0x00,0x00,0x88,0x00,0x03,0x00,0x00,0x84,
0x00,0x01,0x09,0x00,0x00,0x8c,0x00,0x03,0x00,0x00,0x88,0x00,0x01,0x09,0x00,0x00,
0x90,0x00,0x03,0x00,0x00,0x8c,0x00,0x01,0x09,0x00,0x00,0xa0,0x00,0x03,0x00,0x00,
0x90,0x00,0x01,0x09,0x00,0x00,0xa4,0x38,0x03,0x00,0x00,0xa0,0x00,0x01,0x09,0x00,
0x00,0xa8,0x00,0x03,0x00,0x00,0xa4,0x38,0x01,0x09,0x00,0x00,0xac,0x00,0x03,0x00,
0x90,0x00,0x01,0x09,0x00,0x00,0xa4,0x00,0x03,0x00,0x00,0xa0,0x00,0x01,0x09,0x00,
0x00,0xa8,0x00,0x03,0x00,0x00,0xa4,0x00,0x01,0x09,0x00,0x00,0xac,0x00,0x03,0x00,
0x00,0xa8,0x00,0x01,0x09,0x00,0x00,0xb0,0x00,0x03,0x00,0x00,0xac,0x00,0x01,0x09,
0x00,0x00,0xc0,0x00,0x03,0x00,0x00,0xb0,0x00,0x01,0x09,0x00,0x00,0xc4,0x14,0x03,
0x00,0x00,0xc0,0x00,0x01,0x09,0x00,0x00,0xc8,0x00,0x03,0x00,0x00,0xc4,0x14,0x01,
0x00,0x00,0xc0,0x00,0x03,0x00,0x00,0xb0,0x00,0x01,0x09,0x00,0x00,0xc4,0x00,0x03,
0x00,0x00,0xc0,0x00,0x01,0x09,0x00,0x00,0xc8,0x00,0x03,0x00,0x00,0xc4,0x00,0x01,
0x09,0x00,0x00,0xcc,0x00,0x03,0x00,0x00,0xc8,0x00,0x01,0x09,0x00,0x00,0xd0,0x00,
0x03,0x00,0x00,0xcc,0x00,0x01,0x09,0x00,0x01,0x00,0x01,0x03,0x00,0x00,0xd0,0x00,
0x01,0x09,0x00,0x01,0x04,0x00,0x03,0x00,0x01,0x00,0x01,0x01,0x09,0x00,0x01,0x08,
@@ -1454,30 +1454,30 @@
0x00,0x01,0x09,0x00,0x04,0xc4,0x00,0x03,0x00,0x04,0xc0,0x00,0x01,0x09,0x00,0x04,
0xc8,0x00,0x03,0x00,0x04,0xc4,0x00,0x01,0x09,0x00,0x04,0xcc,0x00,0x03,0x00,0x04,
0xc8,0x00,0x01,0x09,0x00,0x04,0xd0,0x00,0x03,0x00,0x04,0xcc,0x00,0x01,0x09,0x00,
0x05,0x00,0x80,0x03,0x00,0x04,0xd0,0x00,0x01,0x09,0x00,0x05,0x04,0x40,0x03,0x00,
0x05,0x00,0x80,0x01,0x09,0x00,0x05,0x08,0x00,0x33,0x00,0x05,0x04,0x40,0x01,0x09,
0x00,0x05,0x0c,0x80,0x03,0x00,0x05,0x08,0x00,0x31,0x09,0x00,0x05,0x10,0x00,0x03,
0x00,0x05,0x0c,0x80,0x01,0x09,0x00,0x05,0x20,0x00,0x13,0x00,0x05,0x10,0x00,0x01,
0x09,0x00,0x05,0x24,0x04,0x03,0x00,0x05,0x20,0x00,0x11,0x09,0x00,0x05,0x28,0x00,
0x03,0x00,0x05,0x24,0x04,0x01,0x09,0x00,0x05,0x2c,0x00,0x13,0x00,0x05,0x28,0x00,
0x01,0x09,0x00,0x05,0x30,0x00,0x03,0x00,0x05,0x2c,0x00,0x11,0x09,0x00,0x05,0x40,
0xa0,0x13,0x00,0x05,0x30,0x00,0x01,0x09,0x00,0x05,0x44,0xe8,0x03,0x00,0x05,0x40,
0xa0,0x11,0x09,0x00,0x05,0x48,0x40,0x0b,0x00,0x05,0x44,0xe8,0x01,0x09,0x00,0x05,
0x4c,0x80,0x13,0x00,0x05,0x48,0x40,0x09,0x09,0x00,0x05,0x50,0x80,0x03,0x00,0x05,
0x4c,0x80,0x11,0x09,0x00,0x05,0x80,0x00,0x03,0x00,0x05,0x50,0x80,0x01,0x01,0x03,
0xff,0xfc,0xfc,0xff,0x09,0x00,0x05,0x84,0x04,0x33,0x00,0x05,0x80,0x00,0x01,0x01,
0x03,0xff,0xff,0xff,0xff,0x09,0x00,0x05,0x88,0xc0,0x03,0x00,0x05,0x84,0x04,0x31,
0x09,0x00,0x05,0x8c,0x00,0x03,0x00,0x05,0x88,0xc0,0x01,0x09,0x00,0x05,0x90,0x00,
0x03,0x00,0x05,0x8c,0x00,0x01,0x09,0x00,0x05,0xa0,0x04,0x03,0x00,0x05,0x90,0x00,
0x05,0x00,0xc0,0x13,0x00,0x04,0xd0,0x00,0x01,0x09,0x00,0x05,0x04,0xc0,0x03,0x00,
0x05,0x00,0xc0,0x11,0x09,0x00,0x05,0x08,0x40,0x33,0x00,0x05,0x04,0xc0,0x01,0x09,
0x00,0x05,0x0c,0x00,0x03,0x00,0x05,0x08,0x40,0x31,0x09,0x00,0x05,0x10,0x80,0x03,
0x00,0x05,0x0c,0x00,0x01,0x09,0x00,0x05,0x20,0x00,0x13,0x00,0x05,0x10,0x80,0x01,
0x09,0x00,0x05,0x24,0x00,0x13,0x00,0x05,0x20,0x00,0x11,0x09,0x00,0x05,0x28,0x00,
0x03,0x00,0x05,0x24,0x00,0x11,0x09,0x00,0x05,0x2c,0x00,0x03,0x00,0x05,0x28,0x00,
0x01,0x09,0x00,0x05,0x30,0x00,0x13,0x00,0x05,0x2c,0x00,0x01,0x09,0x00,0x05,0x40,
0x20,0x1b,0x00,0x05,0x30,0x00,0x11,0x09,0x00,0x05,0x44,0x20,0x13,0x00,0x05,0x40,
0x20,0x19,0x09,0x00,0x05,0x48,0x48,0x0b,0x00,0x05,0x44,0x20,0x11,0x09,0x00,0x05,
0x4c,0x00,0x03,0x00,0x05,0x48,0x48,0x09,0x09,0x00,0x05,0x50,0x00,0x13,0x00,0x05,
0x4c,0x00,0x01,0x09,0x00,0x05,0x80,0x00,0x23,0x00,0x05,0x50,0x00,0x11,0x01,0x03,
0xff,0xfc,0xfc,0xff,0x09,0x00,0x05,0x84,0x00,0x13,0x00,0x05,0x80,0x00,0x21,0x01,
0x03,0xff,0xff,0xff,0xff,0x09,0x00,0x05,0x88,0x80,0x03,0x00,0x05,0x84,0x00,0x11,
0x09,0x00,0x05,0x8c,0x80,0x03,0x00,0x05,0x88,0x80,0x01,0x09,0x00,0x05,0x90,0x00,
0x03,0x00,0x05,0x8c,0x80,0x01,0x09,0x00,0x05,0xa0,0x04,0x03,0x00,0x05,0x90,0x00,
0x01,0x09,0x00,0x05,0xa4,0x00,0x03,0x00,0x05,0xa0,0x04,0x01,0x09,0x00,0x05,0xa8,
0x00,0x13,0x00,0x05,0xa4,0x00,0x01,0x09,0x00,0x05,0xac,0x00,0x03,0x00,0x05,0xa8,
0x00,0x11,0x09,0x00,0x05,0xb0,0x00,0x03,0x00,0x05,0xac,0x00,0x01,0x09,0x00,0x05,
0xc0,0x08,0x03,0x00,0x05,0xb0,0x00,0x01,0x09,0x00,0x05,0xc4,0x00,0x0b,0x00,0x05,
0xc0,0x08,0x01,0x09,0x00,0x05,0xc8,0x80,0x13,0x00,0x05,0xc4,0x00,0x09,0x09,0x00,
0x05,0xcc,0x00,0x03,0x00,0x05,0xc8,0x80,0x11,0x09,0x00,0x05,0xd0,0x00,0x03,0x00,
0x05,0xcc,0x00,0x01,0x09,0x00,0x06,0x03,0x02,0x03,0x00,0x05,0xd0,0x00,0x01,0x09,
0x00,0x06,0x07,0x02,0x03,0x00,0x06,0x03,0x02,0x01,0x09,0x00,0x06,0x0b,0x02,0x03,
0x00,0x06,0x07,0x02,0x01,0x09,0x00,0x06,0x0f,0x02,0x03,0x00,0x06,0x0b,0x02,0x01,
0x00,0x13,0x00,0x05,0xa4,0x00,0x01,0x09,0x00,0x05,0xac,0x00,0x13,0x00,0x05,0xa8,
0x00,0x11,0x09,0x00,0x05,0xb0,0x00,0x03,0x00,0x05,0xac,0x00,0x11,0x09,0x00,0x05,
0xc0,0xc8,0x03,0x00,0x05,0xb0,0x00,0x01,0x09,0x00,0x05,0xc4,0x08,0x0b,0x00,0x05,
0xc0,0xc8,0x01,0x09,0x00,0x05,0xc8,0x00,0x13,0x00,0x05,0xc4,0x08,0x09,0x09,0x00,
0x05,0xcc,0x00,0x13,0x00,0x05,0xc8,0x00,0x11,0x09,0x00,0x05,0xd0,0x00,0x03,0x00,
0x05,0xcc,0x00,0x11,0x09,0x00,0x06,0x03,0x02,0x03,0x00,0x05,0xd0,0x00,0x01,0x09,
0x00,0x06,0x07,0x42,0x03,0x00,0x06,0x03,0x02,0x01,0x09,0x00,0x06,0x0b,0x02,0x03,
0x00,0x06,0x07,0x42,0x01,0x09,0x00,0x06,0x0f,0x02,0x03,0x00,0x06,0x0b,0x02,0x01,
0x09,0x00,0x06,0x13,0x02,0x03,0x00,0x06,0x0f,0x02,0x01,0x09,0x00,0x06,0x23,0x03,
0x03,0x00,0x06,0x13,0x02,0x01,0x09,0x00,0x06,0x27,0x03,0x03,0x00,0x06,0x23,0x03,
0x01,0x09,0x00,0x06,0x2b,0x03,0x03,0x00,0x06,0x27,0x03,0x01,0x09,0x00,0x06,0x2f,
@@ -1485,8 +1485,8 @@
0x01,0x01,0x09,0x00,0x06,0x40,0x00,0x03,0x00,0x06,0x30,0x00,0x01,0x09,0x00,0x06,
0x44,0x00,0x03,0x00,0x06,0x40,0x00,0x01,0x09,0x00,0x06,0x48,0x00,0x03,0x00,0x06,
0x44,0x00,0x01,0x09,0x00,0x06,0x4c,0x00,0x03,0x00,0x06,0x48,0x00,0x01,0x09,0x00,
0x06,0x50,0x80,0x03,0x00,0x06,0x4c,0x00,0x01,0x09,0x00,0x06,0x80,0x00,0x03,0x00,
0x06,0x50,0x80,0x01,0x09,0x00,0x06,0x84,0x00,0x03,0x00,0x06,0x80,0x00,0x01,0x09,
0x06,0x50,0x00,0x03,0x00,0x06,0x4c,0x00,0x01,0x09,0x00,0x06,0x80,0x04,0x03,0x00,
0x06,0x50,0x00,0x01,0x09,0x00,0x06,0x84,0x00,0x03,0x00,0x06,0x80,0x04,0x01,0x09,
0x00,0x06,0x88,0x00,0x03,0x00,0x06,0x84,0x00,0x01,0x09,0x00,0x06,0x8c,0x00,0x03,
0x00,0x06,0x88,0x00,0x01,0x09,0x00,0x06,0x90,0x00,0x03,0x00,0x06,0x8c,0x00,0x01,
0x09,0x00,0x06,0xa0,0x00,0x03,0x00,0x06,0x90,0x00,0x01,0x09,0x00,0x06,0xa4,0x00,
@@ -1494,10 +1494,10 @@
0x01,0x09,0x00,0x06,0xac,0x00,0x03,0x00,0x06,0xa8,0x00,0x01,0x09,0x00,0x06,0xb0,
0x00,0x03,0x00,0x06,0xac,0x00,0x01,0x09,0x00,0x06,0xc0,0x00,0x03,0x00,0x06,0xb0,
0x00,0x01,0x09,0x00,0x06,0xc4,0x00,0x03,0x00,0x06,0xc0,0x00,0x01,0x09,0x00,0x06,
0xc8,0x00,0x03,0x00,0x06,0xc4,0x00,0x01,0x09,0x00,0x06,0xcc,0x00,0x03,0x00,0x06,
0xc8,0x00,0x01,0x09,0x00,0x06,0xd0,0x00,0x03,0x00,0x06,0xcc,0x00,0x01,0x09,0x00,
0x07,0x03,0x02,0x03,0x00,0x06,0xd0,0x00,0x01,0x09,0x00,0x07,0x07,0x02,0x03,0x00,
0x07,0x03,0x02,0x01,0x09,0x00,0x07,0x0b,0x02,0x03,0x00,0x07,0x07,0x02,0x01,0x09,
0xc8,0x40,0x03,0x00,0x06,0xc4,0x00,0x01,0x09,0x00,0x06,0xcc,0x80,0x03,0x00,0x06,
0xc8,0x40,0x01,0x09,0x00,0x06,0xd0,0x00,0x03,0x00,0x06,0xcc,0x80,0x01,0x09,0x00,
0x07,0x02,0x02,0x03,0x00,0x06,0xd0,0x00,0x01,0x09,0x00,0x07,0x07,0x02,0x03,0x00,
0x07,0x02,0x02,0x01,0x09,0x00,0x07,0x0b,0x02,0x03,0x00,0x07,0x07,0x02,0x01,0x09,
0x00,0x07,0x0f,0x02,0x03,0x00,0x07,0x0b,0x02,0x01,0x09,0x00,0x07,0x11,0x02,0x03,
0x00,0x07,0x0f,0x02,0x01,0x09,0x00,0x07,0x23,0x03,0x03,0x00,0x07,0x11,0x02,0x01,
0x09,0x00,0x07,0x27,0x03,0x03,0x00,0x07,0x23,0x03,0x01,0x09,0x00,0x07,0x2b,0x03,
@@ -1520,8 +1520,8 @@
0xd0,0x00,0x01,0x09,0x00,0x08,0x04,0x00,0x03,0x00,0x08,0x00,0x02,0x01,0x09,0x00,
0x08,0x08,0x00,0x03,0x00,0x08,0x04,0x00,0x01,0x09,0x00,0x08,0x0e,0x00,0x03,0x00,
0x08,0x08,0x00,0x01,0x09,0x00,0x08,0x10,0x00,0x03,0x00,0x08,0x0e,0x00,0x01,0x09,
0x00,0x08,0x22,0x01,0x03,0x00,0x08,0x10,0x00,0x01,0x09,0x00,0x08,0x26,0x01,0x03,
0x00,0x08,0x22,0x01,0x01,0x09,0x00,0x08,0x28,0x01,0x03,0x00,0x08,0x26,0x01,0x01,
0x00,0x08,0x23,0x01,0x03,0x00,0x08,0x10,0x00,0x01,0x09,0x00,0x08,0x26,0x01,0x03,
0x00,0x08,0x23,0x01,0x01,0x09,0x00,0x08,0x28,0x01,0x03,0x00,0x08,0x26,0x01,0x01,
0x09,0x00,0x08,0x2e,0x01,0x03,0x00,0x08,0x28,0x01,0x01,0x09,0x00,0x08,0x30,0x00,
0x03,0x00,0x08,0x2e,0x01,0x01,0x09,0x00,0x08,0x40,0x00,0x03,0x00,0x08,0x30,0x00,
0x01,0x09,0x00,0x08,0x44,0x00,0x03,0x00,0x08,0x40,0x00,0x01,0x09,0x00,0x08,0x48,
@@ -1562,9 +1562,9 @@
0x00,0x01,0x09,0x00,0x0a,0x08,0x00,0x03,0x00,0x0a,0x04,0x00,0x01,0x09,0x00,0x0a,
0x0c,0x00,0x03,0x00,0x0a,0x08,0x00,0x01,0x09,0x00,0x0a,0x10,0x00,0x03,0x00,0x0a,
0x0c,0x00,0x01,0x09,0x00,0x0a,0x20,0x00,0x03,0x00,0x0a,0x10,0x00,0x01,0x09,0x00,
0x0a,0x24,0x00,0x03,0x00,0x0a,0x20,0x00,0x01,0x09,0x00,0x0a,0x28,0x00,0x03,0x00,
0x0a,0x24,0x00,0x01,0x09,0x00,0x0a,0x2e,0x00,0x03,0x00,0x0a,0x28,0x00,0x01,0x09,
0x00,0x0a,0x30,0x00,0x03,0x00,0x0a,0x2e,0x00,0x01,0x09,0x00,0x0a,0x40,0x00,0x03,
0x0a,0x26,0x00,0x03,0x00,0x0a,0x20,0x00,0x01,0x09,0x00,0x0a,0x28,0x01,0x03,0x00,
0x0a,0x26,0x00,0x01,0x09,0x00,0x0a,0x2c,0x01,0x03,0x00,0x0a,0x28,0x01,0x01,0x09,
0x00,0x0a,0x30,0x00,0x03,0x00,0x0a,0x2c,0x01,0x01,0x09,0x00,0x0a,0x40,0x00,0x03,
0x00,0x0a,0x30,0x00,0x01,0x09,0x00,0x0a,0x44,0x00,0x03,0x00,0x0a,0x40,0x00,0x01,
0x09,0x00,0x0a,0x48,0x00,0x03,0x00,0x0a,0x44,0x00,0x01,0x09,0x00,0x0a,0x4c,0x00,
0x03,0x00,0x0a,0x48,0x00,0x01,0x09,0x00,0x0a,0x50,0x00,0x03,0x00,0x0a,0x4c,0x00,
@@ -1578,14 +1578,14 @@
0x00,0x0a,0xc0,0x00,0x43,0x00,0x0a,0xb0,0x00,0x01,0x09,0x00,0x0a,0xc4,0x00,0x03,
0x00,0x0a,0xc0,0x00,0x41,0x09,0x00,0x0a,0xc8,0x00,0x03,0x00,0x0a,0xc4,0x00,0x01,
0x09,0x00,0x0a,0xcc,0x00,0x03,0x00,0x0a,0xc8,0x00,0x01,0x09,0x00,0x0a,0xd0,0x00,
0x03,0x00,0x0a,0xcc,0x00,0x01,0x09,0x00,0x0b,0x00,0x02,0x03,0x00,0x0a,0xd0,0x00,
0x01,0x09,0x00,0x0b,0x04,0x00,0x03,0x00,0x0b,0x00,0x02,0x01,0x09,0x00,0x0b,0x0a,
0x03,0x00,0x0a,0xcc,0x00,0x01,0x09,0x00,0x0b,0x00,0x00,0x03,0x00,0x0a,0xd0,0x00,
0x01,0x09,0x00,0x0b,0x04,0x00,0x03,0x00,0x0b,0x00,0x00,0x01,0x09,0x00,0x0b,0x0a,
0x00,0x03,0x00,0x0b,0x04,0x00,0x01,0x09,0x00,0x0b,0x0c,0x00,0x03,0x00,0x0b,0x0a,
0x00,0x01,0x09,0x00,0x0b,0x10,0x00,0x03,0x00,0x0b,0x0c,0x00,0x01,0x09,0x00,0x0b,
0x20,0x01,0x03,0x00,0x0b,0x10,0x00,0x01,0x09,0x00,0x0b,0x26,0x01,0x03,0x00,0x0b,
0x20,0x01,0x01,0x09,0x00,0x0b,0x28,0x01,0x03,0x00,0x0b,0x26,0x01,0x01,0x09,0x00,
0x0b,0x2c,0x01,0x03,0x00,0x0b,0x28,0x01,0x01,0x09,0x00,0x0b,0x30,0x00,0x03,0x00,
0x0b,0x2c,0x01,0x01,0x09,0x00,0x0b,0x40,0x00,0x03,0x00,0x0b,0x30,0x00,0x01,0x09,
0x22,0x01,0x03,0x00,0x0b,0x10,0x00,0x01,0x09,0x00,0x0b,0x26,0x01,0x03,0x00,0x0b,
0x22,0x01,0x01,0x09,0x00,0x0b,0x28,0x01,0x03,0x00,0x0b,0x26,0x01,0x01,0x09,0x00,
0x0b,0x2e,0x01,0x03,0x00,0x0b,0x28,0x01,0x01,0x09,0x00,0x0b,0x30,0x00,0x03,0x00,
0x0b,0x2e,0x01,0x01,0x09,0x00,0x0b,0x40,0x00,0x03,0x00,0x0b,0x30,0x00,0x01,0x09,
0x00,0x0b,0x44,0x00,0x03,0x00,0x0b,0x40,0x00,0x01,0x09,0x00,0x0b,0x48,0x00,0x03,
0x00,0x0b,0x44,0x00,0x01,0x09,0x00,0x0b,0x4c,0x00,0x03,0x00,0x0b,0x48,0x00,0x01,
0x09,0x00,0x0b,0x50,0x00,0x03,0x00,0x0b,0x4c,0x00,0x01,0x09,0x00,0x0b,0x80,0x00,
@@ -1619,19 +1619,19 @@
0xac,0x00,0x01,0x09,0x00,0x0c,0xc0,0x00,0x03,0x00,0x0c,0xb0,0x00,0x01,0x09,0x00,
0x0c,0xc4,0x00,0x03,0x00,0x0c,0xc0,0x00,0x01,0x09,0x00,0x0c,0xc8,0x00,0x03,0x00,
0x0c,0xc4,0x00,0x01,0x09,0x00,0x0c,0xcc,0x00,0x03,0x00,0x0c,0xc8,0x00,0x01,0x09,
0x00,0x0c,0xd0,0x00,0x03,0x00,0x0c,0xcc,0x00,0x01,0x09,0x00,0x0d,0x03,0x46,0x03,
0x00,0x0c,0xd0,0x00,0x01,0x09,0x00,0x0d,0x07,0x02,0x03,0x00,0x0d,0x03,0x46,0x01,
0x00,0x0c,0xd0,0x00,0x03,0x00,0x0c,0xcc,0x00,0x01,0x09,0x00,0x0d,0x03,0x02,0x03,
0x00,0x0c,0xd0,0x00,0x01,0x09,0x00,0x0d,0x07,0x02,0x03,0x00,0x0d,0x03,0x02,0x01,
0x09,0x00,0x0d,0x0b,0x02,0x03,0x00,0x0d,0x07,0x02,0x01,0x09,0x00,0x0d,0x0f,0x02,
0x03,0x00,0x0d,0x0b,0x02,0x01,0x09,0x00,0x0d,0x13,0x02,0x03,0x00,0x0d,0x0f,0x02,
0x01,0x09,0x00,0x0d,0x23,0x03,0x03,0x00,0x0d,0x13,0x02,0x01,0x09,0x00,0x0d,0x27,
0x03,0x03,0x00,0x0d,0x23,0x03,0x01,0x09,0x00,0x0d,0x2b,0x03,0x03,0x00,0x0d,0x27,
0x03,0x01,0x09,0x00,0x0d,0x2f,0x01,0x03,0x00,0x0d,0x2b,0x03,0x01,0x09,0x00,0x0d,
0x07,0x03,0x00,0x0d,0x23,0x03,0x01,0x09,0x00,0x0d,0x2b,0x03,0x03,0x00,0x0d,0x27,
0x07,0x01,0x09,0x00,0x0d,0x2f,0x01,0x03,0x00,0x0d,0x2b,0x03,0x01,0x09,0x00,0x0d,
0x30,0x00,0x03,0x00,0x0d,0x2f,0x01,0x01,0x09,0x00,0x0d,0x40,0x00,0x03,0x00,0x0d,
0x30,0x00,0x01,0x09,0x00,0x0d,0x44,0x00,0x03,0x00,0x0d,0x40,0x00,0x01,0x09,0x00,
0x0d,0x48,0x00,0x03,0x00,0x0d,0x44,0x00,0x01,0x09,0x00,0x0d,0x4c,0x00,0x03,0x00,
0x0d,0x48,0x00,0x01,0x09,0x00,0x0d,0x50,0x00,0x03,0x00,0x0d,0x4c,0x00,0x01,0x09,
0x00,0x0d,0x80,0x00,0x03,0x00,0x0d,0x50,0x00,0x01,0x09,0x00,0x0d,0x84,0x00,0x03,
0x00,0x0d,0x80,0x00,0x01,0x09,0x00,0x0d,0x88,0x00,0x03,0x00,0x0d,0x84,0x00,0x01,
0x00,0x0d,0x80,0x04,0x03,0x00,0x0d,0x50,0x00,0x01,0x09,0x00,0x0d,0x84,0x00,0x03,
0x00,0x0d,0x80,0x04,0x01,0x09,0x00,0x0d,0x88,0x00,0x03,0x00,0x0d,0x84,0x00,0x01,
0x09,0x00,0x0d,0x8c,0x00,0x03,0x00,0x0d,0x88,0x00,0x01,0x09,0x00,0x0d,0x90,0x00,
0x03,0x00,0x0d,0x8c,0x00,0x01,0x09,0x00,0x0d,0xa0,0x00,0x03,0x00,0x0d,0x90,0x00,
0x01,0x09,0x00,0x0d,0xa4,0x00,0x03,0x00,0x0d,0xa0,0x00,0x01,0x09,0x00,0x0d,0xa8,
@@ -1641,26 +1641,26 @@
0xc0,0x00,0x01,0x09,0x00,0x0d,0xc8,0x00,0x03,0x00,0x0d,0xc4,0x00,0x01,0x09,0x00,
0x0d,0xcc,0x00,0x03,0x00,0x0d,0xc8,0x00,0x01,0x09,0x00,0x0d,0xd0,0x00,0x03,0x00,
0x0d,0xcc,0x00,0x01,0x09,0x00,0x0e,0x00,0x00,0x03,0x00,0x0d,0xd0,0x00,0x01,0x09,
0x00,0x0e,0x04,0x40,0x13,0x00,0x0e,0x00,0x00,0x01,0x09,0x00,0x0e,0x08,0x80,0x33,
0x00,0x0e,0x04,0x40,0x11,0x09,0x00,0x0e,0x0c,0x80,0x03,0x00,0x0e,0x08,0x80,0x31,
0x00,0x0e,0x04,0xc0,0x03,0x00,0x0e,0x00,0x00,0x01,0x09,0x00,0x0e,0x08,0x00,0x03,
0x00,0x0e,0x04,0xc0,0x01,0x09,0x00,0x0e,0x0c,0x80,0x03,0x00,0x0e,0x08,0x00,0x01,
0x09,0x00,0x0e,0x10,0x00,0x03,0x00,0x0e,0x0c,0x80,0x01,0x09,0x00,0x0e,0x20,0x00,
0x03,0x00,0x0e,0x10,0x00,0x01,0x09,0x00,0x0e,0x24,0x04,0x03,0x00,0x0e,0x20,0x00,
0x01,0x09,0x00,0x0e,0x28,0x00,0x13,0x00,0x0e,0x24,0x04,0x01,0x09,0x00,0x0e,0x2c,
0x00,0x13,0x00,0x0e,0x28,0x00,0x11,0x09,0x00,0x0e,0x30,0x00,0x03,0x00,0x0e,0x2c,
0x00,0x11,0x09,0x00,0x0e,0x40,0x48,0x03,0x00,0x0e,0x30,0x00,0x01,0x09,0x00,0x0e,
0x44,0x20,0x0b,0x00,0x0e,0x40,0x48,0x01,0x09,0x00,0x0e,0x48,0x80,0x1b,0x00,0x0e,
0x44,0x20,0x09,0x09,0x00,0x0e,0x4c,0x80,0x13,0x00,0x0e,0x48,0x80,0x19,0x09,0x00,
0x0e,0x50,0x00,0x03,0x00,0x0e,0x4c,0x80,0x11,0x09,0x00,0x0e,0x80,0x80,0x33,0x00,
0x0e,0x50,0x00,0x01,0x09,0x00,0x0e,0x84,0x84,0x03,0x00,0x0e,0x80,0x80,0x31,0x09,
0x00,0x0e,0x88,0x40,0x03,0x00,0x0e,0x84,0x84,0x01,0x09,0x00,0x0e,0x8c,0x00,0x03,
0x00,0x0e,0x88,0x40,0x01,0x09,0x00,0x0e,0x90,0x00,0x03,0x00,0x0e,0x8c,0x00,0x01,
0x09,0x00,0x0e,0xa0,0x04,0x13,0x00,0x0e,0x90,0x00,0x01,0x09,0x00,0x0e,0xa4,0x00,
0x13,0x00,0x0e,0xa0,0x04,0x11,0x09,0x00,0x0e,0xa8,0x00,0x03,0x00,0x0e,0xa4,0x00,
0x11,0x09,0x00,0x0e,0xac,0x00,0x03,0x00,0x0e,0xa8,0x00,0x01,0x09,0x00,0x0e,0xb0,
0x00,0x03,0x00,0x0e,0xac,0x00,0x01,0x09,0x00,0x0e,0xc0,0xa0,0x1b,0x00,0x0e,0xb0,
0x00,0x01,0x09,0x00,0x0e,0xc4,0xc8,0x13,0x00,0x0e,0xc0,0xa0,0x19,0x09,0x00,0x0e,
0xc8,0x40,0x03,0x00,0x0e,0xc4,0xc8,0x11,0x09,0x00,0x0e,0xcc,0x00,0x03,0x00,0x0e,
0xc8,0x40,0x01,0x09,0x00,0x0e,0xd0,0x00,0x03,0x00,0x0e,0xcc,0x00,0x01,0x09,0x00,
0x03,0x00,0x0e,0x10,0x00,0x01,0x09,0x00,0x0e,0x24,0x00,0x13,0x00,0x0e,0x20,0x00,
0x01,0x09,0x00,0x0e,0x28,0x00,0x03,0x00,0x0e,0x24,0x00,0x11,0x09,0x00,0x0e,0x2c,
0x00,0x13,0x00,0x0e,0x28,0x00,0x01,0x09,0x00,0x0e,0x30,0x00,0x03,0x00,0x0e,0x2c,
0x00,0x11,0x09,0x00,0x0e,0x40,0x60,0x03,0x00,0x0e,0x30,0x00,0x01,0x09,0x00,0x0e,
0x44,0x48,0x13,0x00,0x0e,0x40,0x60,0x01,0x09,0x00,0x0e,0x48,0xc0,0x03,0x00,0x0e,
0x44,0x48,0x11,0x09,0x00,0x0e,0x4c,0x80,0x13,0x00,0x0e,0x48,0xc0,0x01,0x09,0x00,
0x0e,0x50,0x00,0x03,0x00,0x0e,0x4c,0x80,0x11,0x09,0x00,0x0e,0x80,0x00,0x03,0x00,
0x0e,0x50,0x00,0x01,0x09,0x00,0x0e,0x84,0x00,0x23,0x00,0x0e,0x80,0x00,0x01,0x09,
0x00,0x0e,0x88,0x40,0x13,0x00,0x0e,0x84,0x00,0x21,0x09,0x00,0x0e,0x8c,0x00,0x03,
0x00,0x0e,0x88,0x40,0x11,0x09,0x00,0x0e,0x90,0x00,0x03,0x00,0x0e,0x8c,0x00,0x01,
0x09,0x00,0x0e,0xa0,0x00,0x03,0x00,0x0e,0x90,0x00,0x01,0x09,0x00,0x0e,0xa4,0x00,
0x03,0x00,0x0e,0xa0,0x00,0x01,0x09,0x00,0x0e,0xa8,0x00,0x03,0x00,0x0e,0xa4,0x00,
0x01,0x09,0x00,0x0e,0xac,0x00,0x03,0x00,0x0e,0xa8,0x00,0x01,0x09,0x00,0x0e,0xb0,
0x00,0x03,0x00,0x0e,0xac,0x00,0x01,0x09,0x00,0x0e,0xc0,0x00,0x03,0x00,0x0e,0xb0,
0x00,0x01,0x09,0x00,0x0e,0xc4,0xa0,0x03,0x00,0x0e,0xc0,0x00,0x01,0x09,0x00,0x0e,
0xc8,0x08,0x0b,0x00,0x0e,0xc4,0xa0,0x01,0x09,0x00,0x0e,0xcc,0x00,0x03,0x00,0x0e,
0xc8,0x08,0x09,0x09,0x00,0x0e,0xd0,0x00,0x03,0x00,0x0e,0xcc,0x00,0x01,0x09,0x00,
0x0f,0x00,0x02,0x03,0x00,0x0e,0xd0,0x00,0x01,0x09,0x00,0x0f,0x04,0x00,0x03,0x00,
0x0f,0x00,0x02,0x01,0x09,0x00,0x0f,0x0a,0x00,0x03,0x00,0x0f,0x04,0x00,0x01,0x09,
0x00,0x0f,0x0c,0x00,0x03,0x00,0x0f,0x0a,0x00,0x01,0x09,0x00,0x0f,0x12,0x00,0x03,
@@ -1682,17 +1682,17 @@
0x00,0x03,0x00,0x0f,0xc0,0x10,0x01,0x09,0x00,0x0f,0xc8,0x00,0x03,0x00,0x0f,0xc4,
0x00,0x01,0x09,0x00,0x0f,0xcc,0x00,0x03,0x00,0x0f,0xc8,0x00,0x01,0x09,0x00,0x0f,
0xd0,0x00,0x03,0x00,0x0f,0xcc,0x00,0x01,0x09,0x00,0x10,0x01,0x82,0x03,0x00,0x0f,
0xd0,0x00,0x01,0x09,0x00,0x10,0x04,0x82,0x03,0x00,0x10,0x01,0x82,0x01,0x09,0x00,
0x10,0x0a,0x82,0x03,0x00,0x10,0x04,0x82,0x01,0x09,0x00,0x10,0x0e,0x82,0x03,0x00,
0x10,0x0a,0x82,0x01,0x09,0x00,0x10,0x12,0x02,0x03,0x00,0x10,0x0e,0x82,0x01,0x09,
0x00,0x10,0x20,0x03,0x13,0x00,0x10,0x12,0x02,0x01,0x09,0x00,0x10,0x26,0x03,0x13,
0xd0,0x00,0x01,0x09,0x00,0x10,0x05,0x82,0x03,0x00,0x10,0x01,0x82,0x01,0x09,0x00,
0x10,0x0a,0x82,0x03,0x00,0x10,0x05,0x82,0x01,0x09,0x00,0x10,0x0c,0x82,0x03,0x00,
0x10,0x0a,0x82,0x01,0x09,0x00,0x10,0x12,0x82,0x03,0x00,0x10,0x0c,0x82,0x01,0x09,
0x00,0x10,0x20,0x03,0x13,0x00,0x10,0x12,0x82,0x01,0x09,0x00,0x10,0x26,0x03,0x13,
0x00,0x10,0x20,0x03,0x11,0x09,0x00,0x10,0x2a,0x03,0x13,0x00,0x10,0x26,0x03,0x11,
0x09,0x00,0x10,0x2c,0x01,0x13,0x00,0x10,0x2a,0x03,0x11,0x09,0x00,0x10,0x30,0x00,
0x03,0x00,0x10,0x2c,0x01,0x11,0x09,0x00,0x10,0x40,0x00,0x13,0x00,0x10,0x30,0x00,
0x01,0x09,0x00,0x10,0x44,0x00,0x13,0x00,0x10,0x40,0x00,0x11,0x09,0x00,0x10,0x48,
0x13,0x00,0x10,0x2c,0x01,0x11,0x09,0x00,0x10,0x40,0x00,0x13,0x00,0x10,0x30,0x00,
0x11,0x09,0x00,0x10,0x44,0x00,0x13,0x00,0x10,0x40,0x00,0x11,0x09,0x00,0x10,0x48,
0x00,0x13,0x00,0x10,0x44,0x00,0x11,0x09,0x00,0x10,0x4c,0x00,0x13,0x00,0x10,0x48,
0x00,0x11,0x09,0x00,0x10,0x50,0x00,0x03,0x00,0x10,0x4c,0x00,0x11,0x09,0x00,0x10,
0x80,0x00,0x03,0x00,0x10,0x50,0x00,0x01,0x09,0x00,0x10,0x84,0x00,0x03,0x00,0x10,
0x00,0x11,0x09,0x00,0x10,0x50,0x00,0x13,0x00,0x10,0x4c,0x00,0x11,0x09,0x00,0x10,
0x80,0x00,0x03,0x00,0x10,0x50,0x00,0x11,0x09,0x00,0x10,0x84,0x00,0x03,0x00,0x10,
0x80,0x00,0x01,0x09,0x00,0x10,0x88,0x00,0x03,0x00,0x10,0x84,0x00,0x01,0x09,0x00,
0x10,0x8c,0x00,0x03,0x00,0x10,0x88,0x00,0x01,0x09,0x00,0x10,0x90,0x00,0x03,0x00,
0x10,0x8c,0x00,0x01,0x09,0x00,0x10,0xa0,0x00,0x03,0x00,0x10,0x90,0x00,0x01,0x09,
@@ -1702,28 +1702,28 @@
0x03,0x00,0x10,0xb0,0x00,0x01,0x09,0x00,0x10,0xc4,0x00,0x03,0x00,0x10,0xc0,0x00,
0x01,0x09,0x00,0x10,0xc8,0x00,0x03,0x00,0x10,0xc4,0x00,0x01,0x09,0x00,0x10,0xcc,
0x00,0x03,0x00,0x10,0xc8,0x00,0x01,0x09,0x00,0x10,0xd0,0x00,0x03,0x00,0x10,0xcc,
0x00,0x01,0x09,0x00,0x11,0x00,0x00,0x03,0x00,0x10,0xd0,0x00,0x01,0x09,0x00,0x11,
0x04,0x04,0x03,0x00,0x11,0x00,0x00,0x01,0x09,0x00,0x11,0x08,0x00,0x13,0x00,0x11,
0x04,0x04,0x01,0x09,0x00,0x11,0x0c,0x00,0x03,0x00,0x11,0x08,0x00,0x11,0x09,0x00,
0x11,0x10,0x00,0x03,0x00,0x11,0x0c,0x00,0x01,0x09,0x00,0x11,0x20,0x00,0x03,0x00,
0x11,0x10,0x00,0x01,0x09,0x00,0x11,0x24,0x04,0x03,0x00,0x11,0x20,0x00,0x01,0x09,
0x00,0x11,0x28,0x00,0x03,0x00,0x11,0x24,0x04,0x01,0x09,0x00,0x11,0x2c,0x00,0x03,
0x00,0x11,0x28,0x00,0x01,0x09,0x00,0x11,0x30,0x00,0x03,0x00,0x11,0x2c,0x00,0x01,
0x09,0x00,0x11,0x40,0xa0,0x03,0x00,0x11,0x30,0x00,0x01,0x09,0x00,0x11,0x44,0x40,
0x03,0x00,0x11,0x40,0xa0,0x01,0x09,0x00,0x11,0x48,0x80,0x0b,0x00,0x11,0x44,0x40,
0x01,0x09,0x00,0x11,0x4c,0x80,0x03,0x00,0x11,0x48,0x80,0x09,0x09,0x00,0x11,0x50,
0x80,0x03,0x00,0x11,0x4c,0x80,0x01,0x09,0x00,0x11,0x80,0x00,0x13,0x00,0x11,0x50,
0x80,0x01,0x09,0x00,0x11,0x84,0x80,0x03,0x00,0x11,0x80,0x00,0x11,0x09,0x00,0x11,
0x88,0x40,0x03,0x00,0x11,0x84,0x80,0x01,0x09,0x00,0x11,0x8c,0x00,0x03,0x00,0x11,
0x88,0x40,0x01,0x09,0x00,0x11,0x90,0x00,0x03,0x00,0x11,0x8c,0x00,0x01,0x09,0x00,
0x11,0xa0,0x04,0x03,0x00,0x11,0x90,0x00,0x01,0x09,0x00,0x11,0xa4,0x00,0x13,0x00,
0x11,0xa0,0x04,0x01,0x09,0x00,0x11,0xa8,0x00,0x03,0x00,0x11,0xa4,0x00,0x11,0x09,
0x00,0x11,0xac,0x00,0x03,0x00,0x11,0xa8,0x00,0x01,0x09,0x00,0x11,0xb0,0x00,0x03,
0x00,0x11,0xac,0x00,0x01,0x09,0x00,0x11,0xc0,0x40,0x0b,0x00,0x11,0xb0,0x00,0x01,
0x09,0x00,0x11,0xc4,0x28,0x13,0x00,0x11,0xc0,0x40,0x09,0x09,0x00,0x11,0xc8,0x00,
0x03,0x00,0x11,0xc4,0x28,0x11,0x09,0x00,0x11,0xcc,0x00,0x03,0x00,0x11,0xc8,0x00,
0x01,0x09,0x00,0x11,0xd0,0x00,0x03,0x00,0x11,0xcc,0x00,0x01,0x09,0x00,0x12,0x00,
0x00,0x03,0x00,0x11,0xd0,0x00,0x01,0x09,0x00,0x12,0x04,0x00,0x03,0x00,0x12,0x00,
0x00,0x01,0x09,0x00,0x11,0x00,0xc0,0x13,0x00,0x10,0xd0,0x00,0x01,0x09,0x00,0x11,
0x04,0x00,0x13,0x00,0x11,0x00,0xc0,0x11,0x09,0x00,0x11,0x08,0x80,0x23,0x00,0x11,
0x04,0x00,0x11,0x09,0x00,0x11,0x0c,0x00,0x03,0x00,0x11,0x08,0x80,0x21,0x09,0x00,
0x11,0x10,0x00,0x03,0x00,0x11,0x0c,0x00,0x01,0x09,0x00,0x11,0x20,0x00,0x13,0x00,
0x11,0x10,0x00,0x01,0x09,0x00,0x11,0x24,0x00,0x03,0x00,0x11,0x20,0x00,0x11,0x09,
0x00,0x11,0x28,0x00,0x13,0x00,0x11,0x24,0x00,0x01,0x09,0x00,0x11,0x2c,0x00,0x03,
0x00,0x11,0x28,0x00,0x11,0x09,0x00,0x11,0x30,0x00,0x03,0x00,0x11,0x2c,0x00,0x01,
0x09,0x00,0x11,0x40,0x08,0x1b,0x00,0x11,0x30,0x00,0x01,0x09,0x00,0x11,0x44,0x20,
0x0b,0x00,0x11,0x40,0x08,0x19,0x09,0x00,0x11,0x48,0xc0,0x13,0x00,0x11,0x44,0x20,
0x09,0x09,0x00,0x11,0x4c,0x00,0x03,0x00,0x11,0x48,0xc0,0x11,0x09,0x00,0x11,0x50,
0x00,0x03,0x00,0x11,0x4c,0x00,0x01,0x09,0x00,0x11,0x80,0x00,0x03,0x00,0x11,0x50,
0x00,0x01,0x09,0x00,0x11,0x84,0x00,0x23,0x00,0x11,0x80,0x00,0x01,0x09,0x00,0x11,
0x88,0x40,0x13,0x00,0x11,0x84,0x00,0x21,0x09,0x00,0x11,0x8c,0x00,0x03,0x00,0x11,
0x88,0x40,0x11,0x09,0x00,0x11,0x90,0x80,0x03,0x00,0x11,0x8c,0x00,0x01,0x09,0x00,
0x11,0xa0,0x00,0x03,0x00,0x11,0x90,0x80,0x01,0x09,0x00,0x11,0xa4,0x00,0x03,0x00,
0x11,0xa0,0x00,0x01,0x09,0x00,0x11,0xa8,0x00,0x03,0x00,0x11,0xa4,0x00,0x01,0x09,
0x00,0x11,0xac,0x00,0x03,0x00,0x11,0xa8,0x00,0x01,0x09,0x00,0x11,0xb0,0x00,0x13,
0x00,0x11,0xac,0x00,0x01,0x09,0x00,0x11,0xc0,0x20,0x03,0x00,0x11,0xb0,0x00,0x11,
0x09,0x00,0x11,0xc4,0xc0,0x03,0x00,0x11,0xc0,0x20,0x01,0x09,0x00,0x11,0xc8,0x08,
0x0b,0x00,0x11,0xc4,0xc0,0x01,0x09,0x00,0x11,0xcc,0x00,0x03,0x00,0x11,0xc8,0x08,
0x09,0x09,0x00,0x11,0xd0,0x00,0x13,0x00,0x11,0xcc,0x00,0x01,0x09,0x00,0x12,0x00,
0x00,0x03,0x00,0x11,0xd0,0x00,0x11,0x09,0x00,0x12,0x04,0x00,0x03,0x00,0x12,0x00,
0x00,0x01,0x09,0x00,0x12,0x08,0x00,0x03,0x00,0x12,0x04,0x00,0x01,0x09,0x00,0x12,
0x0c,0x00,0x03,0x00,0x12,0x08,0x00,0x01,0x09,0x00,0x12,0x10,0x00,0x03,0x00,0x12,
0x0c,0x00,0x01,0x09,0x00,0x12,0x20,0x00,0x03,0x00,0x12,0x10,0x00,0x01,0x09,0x00,
@@ -1757,17 +1757,17 @@
0x03,0x00,0x13,0x50,0x00,0x01,0x09,0x00,0x13,0x84,0x00,0x03,0x00,0x13,0x80,0x00,
0x01,0x09,0x00,0x13,0x88,0x00,0x03,0x00,0x13,0x84,0x00,0x01,0x09,0x00,0x13,0x8c,
0x00,0x03,0x00,0x13,0x88,0x00,0x01,0x09,0x00,0x13,0x90,0x00,0x03,0x00,0x13,0x8c,
0x00,0x01,0x09,0x00,0x13,0xa0,0x00,0x03,0x00,0x13,0x90,0x00,0x01,0x09,0x00,0x13,
0xa4,0x00,0x03,0x00,0x13,0xa0,0x00,0x01,0x09,0x00,0x13,0xa8,0x00,0x03,0x00,0x13,
0x00,0x01,0x09,0x00,0x13,0xa2,0x00,0x03,0x00,0x13,0x90,0x00,0x01,0x09,0x00,0x13,
0xa4,0x00,0x03,0x00,0x13,0xa2,0x00,0x01,0x09,0x00,0x13,0xa8,0x00,0x03,0x00,0x13,
0xa4,0x00,0x01,0x09,0x00,0x13,0xac,0x00,0x03,0x00,0x13,0xa8,0x00,0x01,0x09,0x00,
0x13,0xb0,0x00,0x03,0x00,0x13,0xac,0x00,0x01,0x09,0x00,0x13,0xc0,0x00,0x03,0x00,
0x13,0xb0,0x00,0x01,0x09,0x00,0x13,0xc4,0x00,0x03,0x00,0x13,0xc0,0x00,0x01,0x09,
0x00,0x13,0xc8,0x00,0x03,0x00,0x13,0xc4,0x00,0x01,0x09,0x00,0x13,0xcc,0x00,0x03,
0x00,0x13,0xc8,0x00,0x01,0x09,0x00,0x13,0xd0,0x00,0x03,0x00,0x13,0xcc,0x00,0x01,
0x09,0x00,0x14,0x00,0x00,0x03,0x00,0x13,0xd0,0x00,0x01,0x09,0x00,0x14,0x05,0x00,
0x03,0x00,0x14,0x00,0x00,0x01,0x09,0x00,0x14,0x08,0x00,0x03,0x00,0x14,0x05,0x00,
0x01,0x09,0x00,0x14,0x0c,0x00,0x03,0x00,0x14,0x08,0x00,0x01,0x09,0x00,0x14,0x10,
0x00,0x03,0x00,0x14,0x0c,0x00,0x01,0x09,0x00,0x14,0x23,0x00,0x03,0x00,0x14,0x10,
0x09,0x00,0x14,0x00,0x00,0x03,0x00,0x13,0xd0,0x00,0x01,0x09,0x00,0x14,0x04,0x00,
0x03,0x00,0x14,0x00,0x00,0x01,0x09,0x00,0x14,0x08,0x00,0x03,0x00,0x14,0x04,0x00,
0x01,0x09,0x00,0x14,0x0e,0x00,0x03,0x00,0x14,0x08,0x00,0x01,0x09,0x00,0x14,0x10,
0x00,0x03,0x00,0x14,0x0e,0x00,0x01,0x09,0x00,0x14,0x23,0x00,0x03,0x00,0x14,0x10,
0x00,0x01,0x09,0x00,0x14,0x24,0x00,0x03,0x00,0x14,0x23,0x00,0x01,0x09,0x00,0x14,
0x28,0x00,0x03,0x00,0x14,0x24,0x00,0x01,0x09,0x00,0x14,0x2e,0x00,0x03,0x00,0x14,
0x28,0x00,0x01,0x09,0x00,0x14,0x30,0x00,0x03,0x00,0x14,0x2e,0x00,0x01,0x09,0x00,
@@ -1785,49 +1785,49 @@
0x14,0xc4,0x00,0x03,0x00,0x14,0xc0,0x00,0x01,0x09,0x00,0x14,0xc8,0x00,0x03,0x00,
0x14,0xc4,0x00,0x01,0x09,0x00,0x14,0xcc,0x00,0x03,0x00,0x14,0xc8,0x00,0x01,0x09,
0x00,0x14,0xd0,0x00,0x03,0x00,0x14,0xcc,0x00,0x01,0x09,0x00,0x15,0x00,0x00,0x03,
0x00,0x14,0xd0,0x00,0x01,0x09,0x00,0x15,0x04,0x00,0x03,0x00,0x15,0x00,0x00,0x01,
0x09,0x00,0x15,0x08,0x00,0x03,0x00,0x15,0x04,0x00,0x01,0x09,0x00,0x15,0x0c,0x00,
0x03,0x00,0x15,0x08,0x00,0x01,0x09,0x00,0x15,0x10,0x00,0x03,0x00,0x15,0x0c,0x00,
0x01,0x09,0x00,0x15,0x20,0x00,0x03,0x00,0x15,0x10,0x00,0x01,0x09,0x00,0x15,0x24,
0x00,0x03,0x00,0x15,0x20,0x00,0x01,0x09,0x00,0x15,0x28,0x00,0x03,0x00,0x15,0x24,
0x00,0x01,0x09,0x00,0x15,0x2c,0x00,0x03,0x00,0x15,0x28,0x00,0x01,0x09,0x00,0x15,
0x30,0x00,0x03,0x00,0x15,0x2c,0x00,0x01,0x09,0x00,0x15,0x40,0x00,0x03,0x00,0x15,
0x30,0x00,0x01,0x09,0x00,0x15,0x44,0x00,0x03,0x00,0x15,0x40,0x00,0x01,0x09,0x00,
0x15,0x48,0x00,0x03,0x00,0x15,0x44,0x00,0x01,0x09,0x00,0x15,0x4c,0x00,0x03,0x00,
0x15,0x48,0x00,0x01,0x09,0x00,0x15,0x50,0x00,0x03,0x00,0x15,0x4c,0x00,0x01,0x09,
0x00,0x15,0x80,0x00,0x03,0x00,0x15,0x50,0x00,0x01,0x09,0x00,0x15,0x84,0x00,0xc3,
0x00,0x15,0x80,0x00,0x01,0x09,0x00,0x15,0x88,0x00,0x03,0x00,0x15,0x84,0x00,0xc1,
0x00,0x14,0xd0,0x00,0x01,0x09,0x00,0x15,0x04,0x00,0x13,0x00,0x15,0x00,0x00,0x01,
0x09,0x00,0x15,0x08,0xc0,0x33,0x00,0x15,0x04,0x00,0x11,0x09,0x00,0x15,0x0c,0x80,
0x03,0x00,0x15,0x08,0xc0,0x31,0x09,0x00,0x15,0x10,0x80,0x03,0x00,0x15,0x0c,0x80,
0x01,0x09,0x00,0x15,0x20,0x04,0x03,0x00,0x15,0x10,0x80,0x01,0x09,0x00,0x15,0x24,
0x00,0x03,0x00,0x15,0x20,0x04,0x01,0x09,0x00,0x15,0x28,0x00,0x13,0x00,0x15,0x24,
0x00,0x01,0x09,0x00,0x15,0x2c,0x00,0x13,0x00,0x15,0x28,0x00,0x11,0x09,0x00,0x15,
0x30,0x00,0x13,0x00,0x15,0x2c,0x00,0x11,0x09,0x00,0x15,0x40,0x28,0x03,0x00,0x15,
0x30,0x00,0x11,0x09,0x00,0x15,0x44,0x28,0x0b,0x00,0x15,0x40,0x28,0x01,0x09,0x00,
0x15,0x48,0x48,0x1b,0x00,0x15,0x44,0x28,0x09,0x09,0x00,0x15,0x4c,0x00,0x13,0x00,
0x15,0x48,0x48,0x19,0x09,0x00,0x15,0x50,0x00,0x13,0x00,0x15,0x4c,0x00,0x11,0x09,
0x00,0x15,0x80,0xc0,0x33,0x00,0x15,0x50,0x00,0x11,0x09,0x00,0x15,0x84,0xc0,0x23,
0x00,0x15,0x80,0xc0,0x31,0x09,0x00,0x15,0x88,0x00,0x03,0x00,0x15,0x84,0xc0,0x21,
0x09,0x00,0x15,0x8c,0x00,0x03,0x00,0x15,0x88,0x00,0x01,0x09,0x00,0x15,0x90,0x00,
0x03,0x00,0x15,0x8c,0x00,0x01,0x09,0x00,0x15,0xa0,0x00,0x03,0x00,0x15,0x90,0x00,
0x01,0x09,0x00,0x15,0xa4,0x80,0xe3,0x00,0x15,0xa0,0x00,0x01,0x09,0x00,0x15,0xa8,
0x00,0x03,0x00,0x15,0xa4,0x80,0xe1,0x09,0x00,0x15,0xac,0x00,0x03,0x00,0x15,0xa8,
0x03,0x00,0x15,0x8c,0x00,0x01,0x09,0x00,0x15,0xa0,0x00,0x13,0x00,0x15,0x90,0x00,
0x01,0x09,0x00,0x15,0xa4,0x00,0x13,0x00,0x15,0xa0,0x00,0x11,0x09,0x00,0x15,0xa8,
0x00,0x03,0x00,0x15,0xa4,0x00,0x11,0x09,0x00,0x15,0xac,0x00,0x03,0x00,0x15,0xa8,
0x00,0x01,0x09,0x00,0x15,0xb0,0x00,0x03,0x00,0x15,0xac,0x00,0x01,0x09,0x00,0x15,
0xc0,0x00,0x03,0x00,0x15,0xb0,0x00,0x01,0x09,0x00,0x15,0xc4,0x00,0x63,0x00,0x15,
0xc0,0x00,0x01,0x09,0x00,0x15,0xc8,0x00,0x03,0x00,0x15,0xc4,0x00,0x61,0x09,0x00,
0x15,0xcc,0x00,0x03,0x00,0x15,0xc8,0x00,0x01,0x09,0x00,0x15,0xd0,0x00,0x03,0x00,
0x15,0xcc,0x00,0x01,0x09,0x00,0x16,0x02,0x06,0x03,0x00,0x15,0xd0,0x00,0x01,0x09,
0x00,0x16,0x06,0x02,0x03,0x00,0x16,0x02,0x06,0x01,0x09,0x00,0x16,0x0b,0x02,0x03,
0x00,0x16,0x06,0x02,0x01,0x09,0x00,0x16,0x0d,0x02,0x03,0x00,0x16,0x0b,0x02,0x01,
0xc0,0xc0,0x1b,0x00,0x15,0xb0,0x00,0x01,0x09,0x00,0x15,0xc4,0x40,0x13,0x00,0x15,
0xc0,0xc0,0x19,0x09,0x00,0x15,0xc8,0x00,0x03,0x00,0x15,0xc4,0x40,0x11,0x09,0x00,
0x15,0xcc,0x80,0x03,0x00,0x15,0xc8,0x00,0x01,0x09,0x00,0x15,0xd0,0x00,0x03,0x00,
0x15,0xcc,0x80,0x01,0x09,0x00,0x16,0x02,0x02,0x03,0x00,0x15,0xd0,0x00,0x01,0x09,
0x00,0x16,0x06,0x3a,0x03,0x00,0x16,0x02,0x02,0x01,0x09,0x00,0x16,0x0b,0x42,0x03,
0x00,0x16,0x06,0x3a,0x01,0x09,0x00,0x16,0x0d,0x02,0x03,0x00,0x16,0x0b,0x42,0x01,
0x09,0x00,0x16,0x13,0x02,0x03,0x00,0x16,0x0d,0x02,0x01,0x09,0x00,0x16,0x20,0x03,
0x03,0x00,0x16,0x13,0x02,0x01,0x09,0x00,0x16,0x27,0x03,0x03,0x00,0x16,0x20,0x03,
0x01,0x09,0x00,0x16,0x2b,0x03,0x03,0x00,0x16,0x27,0x03,0x01,0x09,0x00,0x16,0x2d,
0x03,0x00,0x16,0x13,0x02,0x01,0x09,0x00,0x16,0x27,0x3b,0x03,0x00,0x16,0x20,0x03,
0x01,0x09,0x00,0x16,0x2b,0x03,0x03,0x00,0x16,0x27,0x3b,0x01,0x09,0x00,0x16,0x2d,
0x01,0x03,0x00,0x16,0x2b,0x03,0x01,0x09,0x00,0x16,0x30,0x00,0x03,0x00,0x16,0x2d,
0x01,0x01,0x09,0x00,0x16,0x40,0x00,0x0b,0x00,0x16,0x30,0x00,0x01,0x09,0x00,0x16,
0x44,0x00,0x0b,0x00,0x16,0x40,0x00,0x09,0x09,0x00,0x16,0x48,0x00,0x0b,0x00,0x16,
0x44,0x00,0x09,0x09,0x00,0x16,0x4c,0x00,0x03,0x00,0x16,0x48,0x00,0x09,0x09,0x00,
0x16,0x50,0x00,0x03,0x00,0x16,0x4c,0x00,0x01,0x09,0x00,0x16,0x83,0x42,0x13,0x00,
0x16,0x50,0x00,0x01,0x09,0x00,0x16,0x87,0x02,0x13,0x00,0x16,0x83,0x42,0x11,0x09,
0x44,0x14,0x0b,0x00,0x16,0x40,0x00,0x09,0x09,0x00,0x16,0x48,0x00,0x0b,0x00,0x16,
0x44,0x14,0x09,0x09,0x00,0x16,0x4c,0x00,0x03,0x00,0x16,0x48,0x00,0x09,0x09,0x00,
0x16,0x50,0x00,0x03,0x00,0x16,0x4c,0x00,0x01,0x09,0x00,0x16,0x83,0x02,0x13,0x00,
0x16,0x50,0x00,0x01,0x09,0x00,0x16,0x87,0x02,0x13,0x00,0x16,0x83,0x02,0x11,0x09,
0x00,0x16,0x8b,0x02,0x13,0x00,0x16,0x87,0x02,0x11,0x09,0x00,0x16,0x8f,0x02,0x03,
0x00,0x16,0x8b,0x02,0x11,0x09,0x00,0x16,0x93,0x02,0x03,0x00,0x16,0x8f,0x02,0x01,
0x09,0x00,0x16,0xa3,0x03,0x03,0x00,0x16,0x93,0x02,0x01,0x09,0x00,0x16,0xa7,0x03,
0x03,0x00,0x16,0xa3,0x03,0x01,0x09,0x00,0x16,0xab,0x03,0x03,0x00,0x16,0xa7,0x03,
0x09,0x00,0x16,0xa3,0x03,0x03,0x00,0x16,0x93,0x02,0x01,0x09,0x00,0x16,0xa7,0x07,
0x03,0x00,0x16,0xa3,0x03,0x01,0x09,0x00,0x16,0xab,0x03,0x03,0x00,0x16,0xa7,0x07,
0x01,0x09,0x00,0x16,0xaf,0x01,0x03,0x00,0x16,0xab,0x03,0x01,0x09,0x00,0x16,0xb0,
0x00,0x03,0x00,0x16,0xaf,0x01,0x01,0x09,0x00,0x16,0xc0,0x00,0x03,0x00,0x16,0xb0,
0x00,0x01,0x09,0x00,0x16,0xc4,0x80,0x03,0x00,0x16,0xc0,0x00,0x01,0x09,0x00,0x16,
0xc8,0x40,0x03,0x00,0x16,0xc4,0x80,0x01,0x09,0x00,0x16,0xcc,0x00,0x03,0x00,0x16,
0xc8,0x40,0x01,0x09,0x00,0x16,0xd0,0x00,0x03,0x00,0x16,0xcc,0x00,0x01,0x09,0x00,
0x17,0x03,0x02,0x03,0x00,0x16,0xd0,0x00,0x01,0x09,0x00,0x17,0x07,0x02,0x03,0x00,
0x17,0x03,0x02,0x01,0x09,0x00,0x17,0x0b,0x02,0x03,0x00,0x17,0x07,0x02,0x01,0x09,
0x00,0x01,0x09,0x00,0x16,0xc4,0x00,0x03,0x00,0x16,0xc0,0x00,0x01,0x09,0x00,0x16,
0xc8,0x08,0x03,0x00,0x16,0xc4,0x00,0x01,0x09,0x00,0x16,0xcc,0x00,0x03,0x00,0x16,
0xc8,0x08,0x01,0x09,0x00,0x16,0xd0,0x00,0x03,0x00,0x16,0xcc,0x00,0x01,0x09,0x00,
0x17,0x02,0x02,0x03,0x00,0x16,0xd0,0x00,0x01,0x09,0x00,0x17,0x07,0x02,0x03,0x00,
0x17,0x02,0x02,0x01,0x09,0x00,0x17,0x0b,0x02,0x03,0x00,0x17,0x07,0x02,0x01,0x09,
0x00,0x17,0x0f,0x02,0x03,0x00,0x17,0x0b,0x02,0x01,0x09,0x00,0x17,0x11,0x02,0x03,
0x00,0x17,0x0f,0x02,0x01,0x09,0x00,0x17,0x23,0x03,0x03,0x00,0x17,0x11,0x02,0x01,
0x09,0x00,0x17,0x27,0x03,0x03,0x00,0x17,0x23,0x03,0x01,0x09,0x00,0x17,0x2b,0x03,
@@ -1839,8 +1839,8 @@
0x4c,0x00,0x01,0x09,0x00,0x17,0x80,0x0a,0x03,0x00,0x17,0x50,0x00,0x01,0x09,0x00,
0x17,0x84,0x00,0x03,0x00,0x17,0x80,0x0a,0x01,0x09,0x00,0x17,0x88,0x00,0x03,0x00,
0x17,0x84,0x00,0x01,0x09,0x00,0x17,0x8e,0x00,0x03,0x00,0x17,0x88,0x00,0x01,0x09,
0x00,0x17,0x90,0x00,0x03,0x00,0x17,0x8e,0x00,0x01,0x09,0x00,0x17,0xa2,0x01,0x03,
0x00,0x17,0x90,0x00,0x01,0x09,0x00,0x17,0xa6,0x01,0x03,0x00,0x17,0xa2,0x01,0x01,
0x00,0x17,0x90,0x00,0x03,0x00,0x17,0x8e,0x00,0x01,0x09,0x00,0x17,0xa3,0x01,0x03,
0x00,0x17,0x90,0x00,0x01,0x09,0x00,0x17,0xa6,0x01,0x03,0x00,0x17,0xa3,0x01,0x01,
0x09,0x00,0x17,0xa8,0x01,0x03,0x00,0x17,0xa6,0x01,0x01,0x09,0x00,0x17,0xae,0x01,
0x03,0x00,0x17,0xa8,0x01,0x01,0x09,0x00,0x17,0xb0,0x00,0x03,0x00,0x17,0xae,0x01,
0x01,0x09,0x00,0x17,0xc0,0x00,0x03,0x00,0x17,0xb0,0x00,0x01,0x09,0x00,0x17,0xc4,
@@ -1861,9 +1861,9 @@
0x80,0x00,0x01,0x09,0x00,0x18,0x88,0x00,0x03,0x00,0x18,0x84,0x00,0x01,0x09,0x00,
0x18,0x8c,0x00,0x03,0x00,0x18,0x88,0x00,0x01,0x09,0x00,0x18,0x90,0x00,0x03,0x00,
0x18,0x8c,0x00,0x01,0x09,0x00,0x18,0xa0,0x00,0x03,0x00,0x18,0x90,0x00,0x01,0x09,
0x00,0x18,0xa4,0x00,0x03,0x00,0x18,0xa0,0x00,0x01,0x09,0x00,0x18,0xa8,0x00,0x03,
0x00,0x18,0xa4,0x00,0x01,0x09,0x00,0x18,0xae,0x00,0x03,0x00,0x18,0xa8,0x00,0x01,
0x09,0x00,0x18,0xb0,0x00,0x03,0x00,0x18,0xae,0x00,0x01,0x09,0x00,0x18,0xc0,0x00,
0x00,0x18,0xa6,0x00,0x03,0x00,0x18,0xa0,0x00,0x01,0x09,0x00,0x18,0xa8,0x01,0x03,
0x00,0x18,0xa6,0x00,0x01,0x09,0x00,0x18,0xac,0x01,0x03,0x00,0x18,0xa8,0x01,0x01,
0x09,0x00,0x18,0xb0,0x00,0x03,0x00,0x18,0xac,0x01,0x01,0x09,0x00,0x18,0xc0,0x00,
0x03,0x00,0x18,0xb0,0x00,0x01,0x09,0x00,0x18,0xc4,0x00,0x03,0x00,0x18,0xc0,0x00,
0x01,0x09,0x00,0x18,0xc8,0x00,0x03,0x00,0x18,0xc4,0x00,0x01,0x09,0x00,0x18,0xcc,
0x00,0x03,0x00,0x18,0xc8,0x00,0x01,0x09,0x00,0x18,0xd0,0x00,0x03,0x00,0x18,0xcc,
@@ -1894,15 +1894,15 @@
0x0c,0x00,0x01,0x09,0x00,0x1a,0x20,0x00,0x13,0x00,0x1a,0x10,0x00,0x01,0x09,0x00,
0x1a,0x24,0x00,0x13,0x00,0x1a,0x20,0x00,0x11,0x09,0x00,0x1a,0x28,0x00,0x13,0x00,
0x1a,0x24,0x00,0x11,0x09,0x00,0x1a,0x2c,0x00,0x13,0x00,0x1a,0x28,0x00,0x11,0x09,
0x00,0x1a,0x30,0x00,0x03,0x00,0x1a,0x2c,0x00,0x11,0x09,0x00,0x1a,0x40,0x00,0x13,
0x00,0x1a,0x30,0x00,0x01,0x09,0x00,0x1a,0x44,0x00,0x13,0x00,0x1a,0x40,0x00,0x11,
0x00,0x1a,0x30,0x00,0x13,0x00,0x1a,0x2c,0x00,0x11,0x09,0x00,0x1a,0x40,0x00,0x13,
0x00,0x1a,0x30,0x00,0x11,0x09,0x00,0x1a,0x44,0x00,0x13,0x00,0x1a,0x40,0x00,0x11,
0x09,0x00,0x1a,0x48,0x00,0x13,0x00,0x1a,0x44,0x00,0x11,0x09,0x00,0x1a,0x4c,0x00,
0x13,0x00,0x1a,0x48,0x00,0x11,0x09,0x00,0x1a,0x50,0x00,0x03,0x00,0x1a,0x4c,0x00,
0x11,0x09,0x00,0x1a,0x82,0x81,0x03,0x00,0x1a,0x50,0x00,0x01,0x09,0x00,0x1a,0x84,
0x13,0x00,0x1a,0x48,0x00,0x11,0x09,0x00,0x1a,0x50,0x00,0x13,0x00,0x1a,0x4c,0x00,
0x11,0x09,0x00,0x1a,0x82,0x81,0x03,0x00,0x1a,0x50,0x00,0x11,0x09,0x00,0x1a,0x84,
0x80,0x03,0x00,0x1a,0x82,0x81,0x01,0x09,0x00,0x1a,0x88,0x80,0x03,0x00,0x1a,0x84,
0x80,0x01,0x09,0x00,0x1a,0x8c,0x80,0x03,0x00,0x1a,0x88,0x80,0x01,0x09,0x00,0x1a,
0x90,0x00,0x03,0x00,0x1a,0x8c,0x80,0x01,0x09,0x00,0x1a,0xa0,0x00,0x03,0x00,0x1a,
0x90,0x00,0x01,0x09,0x00,0x1a,0xa4,0x00,0x03,0x00,0x1a,0xa0,0x00,0x01,0x09,0x00,
0x90,0x80,0x03,0x00,0x1a,0x8c,0x80,0x01,0x09,0x00,0x1a,0xa0,0x00,0x03,0x00,0x1a,
0x90,0x80,0x01,0x09,0x00,0x1a,0xa4,0x00,0x03,0x00,0x1a,0xa0,0x00,0x01,0x09,0x00,
0x1a,0xa8,0x00,0x03,0x00,0x1a,0xa4,0x00,0x01,0x09,0x00,0x1a,0xac,0x00,0x03,0x00,
0x1a,0xa8,0x00,0x01,0x09,0x00,0x1a,0xb0,0x00,0x03,0x00,0x1a,0xac,0x00,0x01,0x09,
0x00,0x1a,0xc0,0x00,0x03,0x00,0x1a,0xb0,0x00,0x01,0x09,0x00,0x1a,0xc4,0x00,0x03,
@@ -2183,41 +2183,41 @@
0x00,0x28,0x20,0x00,0x13,0x00,0x28,0x10,0x00,0x01,0x09,0x00,0x28,0x24,0x00,0x13,
0x00,0x28,0x20,0x00,0x11,0x09,0x00,0x28,0x28,0x00,0x13,0x00,0x28,0x24,0x00,0x11,
0x09,0x00,0x28,0x2c,0x00,0x13,0x00,0x28,0x28,0x00,0x11,0x09,0x00,0x28,0x30,0x00,
0x03,0x00,0x28,0x2c,0x00,0x11,0x09,0x00,0x28,0x40,0x00,0x03,0x00,0x28,0x30,0x00,
0x01,0x09,0x00,0x28,0x44,0x00,0x03,0x00,0x28,0x40,0x00,0x01,0x09,0x00,0x28,0x48,
0x13,0x00,0x28,0x2c,0x00,0x11,0x09,0x00,0x28,0x40,0x00,0x03,0x00,0x28,0x30,0x00,
0x11,0x09,0x00,0x28,0x44,0x00,0x03,0x00,0x28,0x40,0x00,0x01,0x09,0x00,0x28,0x48,
0x00,0x03,0x00,0x28,0x44,0x00,0x01,0x09,0x00,0x28,0x4c,0x00,0x03,0x00,0x28,0x48,
0x00,0x01,0x09,0x00,0x28,0x50,0x00,0x03,0x00,0x28,0x4c,0x00,0x01,0x09,0x00,0x28,
0x80,0x80,0x03,0x00,0x28,0x50,0x00,0x01,0x09,0x00,0x28,0x84,0x80,0x03,0x00,0x28,
0x80,0x80,0x01,0x09,0x00,0x28,0x88,0x80,0x03,0x00,0x28,0x84,0x80,0x01,0x09,0x00,
0x28,0x8c,0x80,0x03,0x00,0x28,0x88,0x80,0x01,0x09,0x00,0x28,0x90,0x00,0x03,0x00,
0x28,0x8c,0x80,0x01,0x09,0x00,0x28,0xa0,0x00,0x03,0x00,0x28,0x90,0x00,0x01,0x09,
0x28,0x8c,0x80,0x03,0x00,0x28,0x88,0x80,0x01,0x09,0x00,0x28,0x90,0x80,0x03,0x00,
0x28,0x8c,0x80,0x01,0x09,0x00,0x28,0xa0,0x00,0x03,0x00,0x28,0x90,0x80,0x01,0x09,
0x00,0x28,0xa4,0x00,0x03,0x00,0x28,0xa0,0x00,0x01,0x09,0x00,0x28,0xa8,0x00,0x03,
0x00,0x28,0xa4,0x00,0x01,0x09,0x00,0x28,0xac,0x00,0x03,0x00,0x28,0xa8,0x00,0x01,
0x09,0x00,0x28,0xb0,0x00,0x03,0x00,0x28,0xac,0x00,0x01,0x09,0x00,0x28,0xc0,0x00,
0x13,0x00,0x28,0xb0,0x00,0x01,0x09,0x00,0x28,0xc4,0x00,0x13,0x00,0x28,0xc0,0x00,
0x11,0x09,0x00,0x28,0xc8,0x00,0x13,0x00,0x28,0xc4,0x00,0x11,0x09,0x00,0x28,0xcc,
0x00,0x13,0x00,0x28,0xc8,0x00,0x11,0x09,0x00,0x28,0xd0,0x00,0x03,0x00,0x28,0xcc,
0x00,0x11,0x09,0x00,0x29,0x00,0x80,0x33,0x00,0x28,0xd0,0x00,0x01,0x09,0x00,0x29,
0x04,0x84,0x33,0x00,0x29,0x00,0x80,0x31,0x09,0x00,0x29,0x08,0xc0,0x03,0x00,0x29,
0x04,0x84,0x31,0x09,0x00,0x29,0x0c,0x00,0x03,0x00,0x29,0x08,0xc0,0x01,0x09,0x00,
0x29,0x10,0x00,0x03,0x00,0x29,0x0c,0x00,0x01,0x09,0x00,0x29,0x20,0x04,0x13,0x00,
0x29,0x10,0x00,0x01,0x09,0x00,0x29,0x24,0x00,0x13,0x00,0x29,0x20,0x04,0x11,0x09,
0x00,0x29,0x28,0x00,0x13,0x00,0x29,0x24,0x00,0x11,0x09,0x00,0x29,0x2c,0x00,0x03,
0x00,0x29,0x28,0x00,0x11,0x09,0x00,0x29,0x30,0x00,0x03,0x00,0x29,0x2c,0x00,0x01,
0x09,0x00,0x29,0x40,0xe8,0x1b,0x00,0x29,0x30,0x00,0x01,0x09,0x00,0x29,0x44,0xe8,
0x1b,0x00,0x29,0x40,0xe8,0x19,0x09,0x00,0x29,0x48,0xc0,0x13,0x00,0x29,0x44,0xe8,
0x19,0x09,0x00,0x29,0x4c,0x00,0x03,0x00,0x29,0x48,0xc0,0x11,0x09,0x00,0x29,0x50,
0x80,0x03,0x00,0x29,0x4c,0x00,0x01,0x09,0x00,0x29,0x80,0x00,0x03,0x00,0x29,0x50,
0x80,0x01,0x09,0x00,0x29,0x84,0x40,0x03,0x00,0x29,0x80,0x00,0x01,0x09,0x00,0x29,
0x88,0x00,0x33,0x00,0x29,0x84,0x40,0x01,0x09,0x00,0x29,0x8c,0x80,0x03,0x00,0x29,
0x88,0x00,0x31,0x09,0x00,0x29,0x90,0x00,0x03,0x00,0x29,0x8c,0x80,0x01,0x09,0x00,
0x29,0xa0,0x00,0x03,0x00,0x29,0x90,0x00,0x01,0x09,0x00,0x29,0xa4,0x04,0x03,0x00,
0x29,0xa0,0x00,0x01,0x09,0x00,0x29,0xa8,0x00,0x03,0x00,0x29,0xa4,0x04,0x01,0x09,
0x00,0x29,0xac,0x00,0x13,0x00,0x29,0xa8,0x00,0x01,0x09,0x00,0x29,0xb0,0x00,0x03,
0x00,0x29,0xac,0x00,0x11,0x09,0x00,0x29,0xc0,0x00,0x03,0x00,0x29,0xb0,0x00,0x01,
0x09,0x00,0x29,0xc4,0x00,0x03,0x00,0x29,0xc0,0x00,0x01,0x09,0x00,0x29,0xc8,0x00,
0x0b,0x00,0x29,0xc4,0x00,0x01,0x09,0x00,0x29,0xcc,0x80,0x13,0x00,0x29,0xc8,0x00,
0x09,0x09,0x00,0x29,0xd0,0x00,0x03,0x00,0x29,0xcc,0x80,0x11,0x09,0x00,0x2a,0x00,
0x00,0x13,0x00,0x28,0xc8,0x00,0x11,0x09,0x00,0x28,0xd0,0x00,0x13,0x00,0x28,0xcc,
0x00,0x11,0x09,0x00,0x29,0x00,0x00,0x03,0x00,0x28,0xd0,0x00,0x11,0x09,0x00,0x29,
0x04,0x00,0x03,0x00,0x29,0x00,0x00,0x01,0x09,0x00,0x29,0x08,0x00,0x03,0x00,0x29,
0x04,0x00,0x01,0x09,0x00,0x29,0x0c,0x00,0x03,0x00,0x29,0x08,0x00,0x01,0x09,0x00,
0x29,0x10,0x00,0x03,0x00,0x29,0x0c,0x00,0x01,0x09,0x00,0x29,0x20,0x00,0x03,0x00,
0x29,0x10,0x00,0x01,0x09,0x00,0x29,0x24,0x00,0x03,0x00,0x29,0x20,0x00,0x01,0x09,
0x00,0x29,0x28,0x00,0x03,0x00,0x29,0x24,0x00,0x01,0x09,0x00,0x29,0x2c,0x00,0x03,
0x00,0x29,0x28,0x00,0x01,0x09,0x00,0x29,0x30,0x00,0x03,0x00,0x29,0x2c,0x00,0x01,
0x09,0x00,0x29,0x40,0x00,0x03,0x00,0x29,0x30,0x00,0x01,0x09,0x00,0x29,0x44,0x00,
0x03,0x00,0x29,0x40,0x00,0x01,0x09,0x00,0x29,0x48,0x00,0x03,0x00,0x29,0x44,0x00,
0x01,0x09,0x00,0x29,0x4c,0x00,0x03,0x00,0x29,0x48,0x00,0x01,0x09,0x00,0x29,0x50,
0x00,0x03,0x00,0x29,0x4c,0x00,0x01,0x09,0x00,0x29,0x80,0x00,0x03,0x00,0x29,0x50,
0x00,0x01,0x09,0x00,0x29,0x84,0x00,0xc3,0x00,0x29,0x80,0x00,0x01,0x09,0x00,0x29,
0x88,0x00,0x03,0x00,0x29,0x84,0x00,0xc1,0x09,0x00,0x29,0x8c,0x00,0x03,0x00,0x29,
0x88,0x00,0x01,0x09,0x00,0x29,0x90,0x00,0x03,0x00,0x29,0x8c,0x00,0x01,0x09,0x00,
0x29,0xa0,0x00,0x03,0x00,0x29,0x90,0x00,0x01,0x09,0x00,0x29,0xa4,0x80,0xe3,0x00,
0x29,0xa0,0x00,0x01,0x09,0x00,0x29,0xa8,0x00,0x03,0x00,0x29,0xa4,0x80,0xe1,0x09,
0x00,0x29,0xac,0x00,0x03,0x00,0x29,0xa8,0x00,0x01,0x09,0x00,0x29,0xb0,0x00,0x03,
0x00,0x29,0xac,0x00,0x01,0x09,0x00,0x29,0xc0,0x00,0x03,0x00,0x29,0xb0,0x00,0x01,
0x09,0x00,0x29,0xc4,0x00,0x63,0x00,0x29,0xc0,0x00,0x01,0x09,0x00,0x29,0xc8,0x00,
0x03,0x00,0x29,0xc4,0x00,0x61,0x09,0x00,0x29,0xcc,0x00,0x03,0x00,0x29,0xc8,0x00,
0x01,0x09,0x00,0x29,0xd0,0x00,0x03,0x00,0x29,0xcc,0x00,0x01,0x09,0x00,0x2a,0x00,
0x00,0x03,0x00,0x29,0xd0,0x00,0x01,0x09,0x00,0x2a,0x04,0x00,0x03,0x00,0x2a,0x00,
0x00,0x01,0x09,0x00,0x2a,0x08,0x00,0x03,0x00,0x2a,0x04,0x00,0x01,0x09,0x00,0x2a,
0x0c,0x00,0x03,0x00,0x2a,0x08,0x00,0x01,0x09,0x00,0x2a,0x10,0x00,0x03,0x00,0x2a,

View File

@@ -629,6 +629,7 @@ static void gt_setup_ide (struct pci_controller *hose,
}
}
#ifndef CONFIG_P3G4
static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
{
unsigned char pin, irq;
@@ -642,6 +643,7 @@ static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
}
}
#endif
struct pci_config_table gt_config_table[] = {
{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
@@ -651,12 +653,16 @@ struct pci_config_table gt_config_table[] = {
};
struct pci_controller pci0_hose = {
#ifndef CONFIG_P3G4
fixup_irq:gt_fixup_irq,
#endif
config_table:gt_config_table,
};
struct pci_controller pci1_hose = {
#ifndef CONFIG_P3G4
fixup_irq:gt_fixup_irq,
#endif
config_table:gt_config_table,
};
@@ -692,8 +698,10 @@ void pci_init_board (void)
pci_register_hose (&pci0_hose);
#ifndef CONFIG_P3G4
pciArbiterEnable (PCI_HOST0);
pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
#endif
command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MASTER;
@@ -735,8 +743,10 @@ void pci_init_board (void)
pci_register_hose (&pci1_hose);
#ifndef CONFIG_P3G4
pciArbiterEnable (PCI_HOST1);
pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
#endif
command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
command |= PCI_COMMAND_MASTER;

View File

@@ -0,0 +1,46 @@
#
# (C) Copyright 2001
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := $(BOARD).o flash.o m88e6060.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-include .depend
#########################################################################

View File

@@ -0,0 +1,21 @@
# (C) Copyright 2004
# Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
#
# Support for the Elmeg VoVPN Gateway Module
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
TEXT_BASE = 0xfff00000

View File

@@ -0,0 +1,506 @@
/*
* (C) Copyright 2004
* Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
*
* Support for the Elmeg VoVPN Gateway Module
* ------------------------------------------
* This is a signle bank flashdriver for INTEL 28F320J3, 28F640J3
* and 28F128J3A flashs working in 8 Bit mode.
*
* Most of this code is taken from existing u-boot source code.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
#define FLASH_CMD_READ_ID 0x90
#define FLASH_CMD_READ_STATUS 0x70
#define FLASH_CMD_RESET 0xff
#define FLASH_CMD_BLOCK_ERASE 0x20
#define FLASH_CMD_ERASE_CONFIRM 0xd0
#define FLASH_CMD_CLEAR_STATUS 0x50
#define FLASH_CMD_SUSPEND_ERASE 0xb0
#define FLASH_CMD_WRITE 0x40
#define FLASH_CMD_WRITE_BUFF 0xe8
#define FLASH_CMD_PROG_RESUME 0xd0
#define FLASH_CMD_PROTECT 0x60
#define FLASH_CMD_PROTECT_SET 0x01
#define FLASH_CMD_PROTECT_CLEAR 0xd0
#define FLASH_STATUS_DONE 0x80
#define FLASH_WRITE_BUFFER_SIZE 32
#ifdef CFG_FLASH_16BIT
#define FLASH_WORD_SIZE unsigned short
#define FLASH_ID_MASK 0xffff
#define FLASH_CMD_ADDR_SHIFT 0
#else
#define FLASH_WORD_SIZE unsigned char
#define FLASH_ID_MASK 0xff
/* A0 is not used in either 8x or 16x for READ ID */
#define FLASH_CMD_ADDR_SHIFT 1
#endif
static unsigned long
flash_get(volatile FLASH_WORD_SIZE *addr, flash_info_t *info)
{
volatile FLASH_WORD_SIZE *p;
FLASH_WORD_SIZE value;
int i;
addr[0] = FLASH_CMD_READ_ID;
/* manufactor */
value = addr[0 << FLASH_CMD_ADDR_SHIFT];
switch (value) {
case (INTEL_MANUFACT & FLASH_ID_MASK):
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
*addr = FLASH_CMD_RESET;
return (0);
}
/* device */
value = addr[1 << FLASH_CMD_ADDR_SHIFT];
switch (value) {
case (INTEL_ID_28F320J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000;
break;
case (INTEL_ID_28F640J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
break;
case (INTEL_ID_28F128J3A & FLASH_ID_MASK):
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
*addr = FLASH_CMD_RESET;
return (0);
}
/* setup sectors */
for (i = 0; i < info->sector_count; i++) {
info->start[i] = (unsigned long)addr + (i * info->size/info->sector_count);
}
/* check protected sectors */
for (i = 0; i < info->sector_count; i++) {
p = (volatile FLASH_WORD_SIZE *)(info->start[i]);
info->protect[i] = p[2 << FLASH_CMD_ADDR_SHIFT] & 1;
}
/* reset bank */
*addr = FLASH_CMD_RESET;
return (info->size);
}
unsigned long
flash_init(void)
{
unsigned long size;
int i;
for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
size = flash_get((volatile FLASH_WORD_SIZE *)CFG_FLASH_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH Size=0x%08lx\n", size);
return (0);
}
/* always protect 1 sector containing the HRCW */
flash_protect(FLAG_PROTECT_SET,
flash_info[0].start[0],
flash_info[0].start[1] - 1,
&flash_info[0]);
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
flash_protect(FLAG_PROTECT_SET,
CFG_MONITOR_FLASH,
CFG_MONITOR_FLASH+CFG_MONITOR_LEN-1,
&flash_info[0]);
#endif
#ifdef CFG_ENV_IS_IN_FLASH
flash_protect(FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR+CFG_ENV_SECT_SIZE-1,
&flash_info[0]);
#endif
return (size);
}
void
flash_print_info(flash_info_t *info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL: printf ("INTEL "); break;
default: printf ("Unknown Vendor "); break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F320J3A: printf ("28F320JA3 (32 Mbit)\n");
break;
case FLASH_28F640J3A: printf ("28F640JA3 (64 Mbit)\n");
break;
case FLASH_28F128J3A: printf ("28F128JA3 (128 Mbit)\n");
break;
default: printf ("Unknown Chip Type");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i=0; i<info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " "
);
}
printf ("\n");
}
int
flash_erase(flash_info_t *info, int s_first, int s_last)
{
unsigned long start, now, last;
int flag, prot, sect;
volatile FLASH_WORD_SIZE *addr;
FLASH_WORD_SIZE status;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return (1);
}
if (info->flash_id == FLASH_UNKNOWN) {
printf ("Cannot erase unknown flash - aborted\n");
return (1);
}
prot = 0;
for (sect=s_first; sect<=s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n", prot);
} else {
printf ("\n");
}
start = get_timer (0);
last = start;
for (sect = s_first; sect<=s_last; sect++) {
if (info->protect[sect]) {
continue;
}
addr = (volatile FLASH_WORD_SIZE *)(info->start[sect]);
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
#ifdef DEBUG
printf("Erase sector %d at start addr 0x%08X", sect, (unsigned int)info->start[sect]);
#endif
*addr = FLASH_CMD_CLEAR_STATUS;
*addr = FLASH_CMD_BLOCK_ERASE;
*addr = FLASH_CMD_ERASE_CONFIRM;
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
while (((status = *addr) & FLASH_STATUS_DONE) != FLASH_STATUS_DONE) {
if ((now=get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf("Flash erase timeout at address %lx\n", info->start[sect]);
*addr = FLASH_CMD_SUSPEND_ERASE;
*addr = FLASH_CMD_RESET;
return (1);
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
*addr = FLASH_CMD_RESET;
}
printf (" done\n");
return (0);
}
static int
write_buff2( volatile FLASH_WORD_SIZE *dst,
volatile FLASH_WORD_SIZE *src,
unsigned long cnt )
{
unsigned long start;
FLASH_WORD_SIZE status;
int flag, i;
start = get_timer (0);
while (1) {
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
dst[0] = FLASH_CMD_WRITE_BUFF;
if ((status = *dst) & FLASH_STATUS_DONE) {
break;
}
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
return (-1);
}
}
dst[0] = (FLASH_WORD_SIZE)(cnt - 1);
for (i=0; i<cnt; i++) {
dst[i] = src[i];
}
dst[0] = FLASH_CMD_PROG_RESUME;
if (flag) {
enable_interrupts();
}
return( 0 );
}
static int
poll_status( volatile FLASH_WORD_SIZE *addr )
{
unsigned long start;
start = get_timer (0);
/* wait for error or finish */
while (1) {
if (*addr == FLASH_STATUS_DONE) {
if (*addr == FLASH_STATUS_DONE) {
break;
}
}
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
*addr = FLASH_CMD_RESET;
return (-1);
}
}
*addr = FLASH_CMD_RESET;
return (0);
}
/*
* write_buff return values:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
* 4 - Flash not identified
*/
int
write_buff(flash_info_t *info, uchar *src, ulong udst, ulong cnt)
{
volatile FLASH_WORD_SIZE *addr, *dst;
unsigned long bcnt;
int flag, i;
if (info->flash_id == FLASH_UNKNOWN) {
return (4);
}
addr = (volatile FLASH_WORD_SIZE *)(info->start[0]);
dst = (volatile FLASH_WORD_SIZE *) udst;
#ifdef CFG_FLASH_16BIT
#error NYI
#else
while (cnt > 0) {
/* Check if buffer write is possible */
if (cnt > 1 && (((unsigned long)dst & (FLASH_WRITE_BUFFER_SIZE - 1)) == 0)) {
bcnt = cnt > FLASH_WRITE_BUFFER_SIZE ? FLASH_WRITE_BUFFER_SIZE : cnt;
/* Check if Flash is (sufficiently) erased */
for (i=0; i<bcnt; i++) {
if ((dst[i] & src[i]) != src[i]) {
return (2);
}
}
if (write_buff2( dst,src,bcnt ) != 0) {
addr[0] = FLASH_CMD_READ_STATUS;
}
if (poll_status( dst ) != 0) {
return (1);
}
cnt -= bcnt;
dst += bcnt;
src += bcnt;
continue;
}
/* Check if Flash is (sufficiently) erased */
if ((*dst & *src) != *src) {
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
addr[0] = FLASH_CMD_ERASE_CONFIRM;
addr[0] = FLASH_CMD_WRITE;
*dst++ = *src++;
/* re-enable interrupts if necessary */
if (flag) {
enable_interrupts();
}
if (poll_status( dst ) != 0) {
return (1);
}
cnt --;
}
#endif
return (0);
}
int
flash_real_protect(flash_info_t *info, long sector, int prot)
{
volatile FLASH_WORD_SIZE *addr;
unsigned long start;
addr = (volatile FLASH_WORD_SIZE *)(info->start[sector]);
*addr = FLASH_CMD_CLEAR_STATUS;
*addr = FLASH_CMD_PROTECT;
if(prot) {
*addr = FLASH_CMD_PROTECT_SET;
} else {
*addr = FLASH_CMD_PROTECT_CLEAR;
}
/* wait for error or finish */
start = get_timer (0);
while(!(addr[0] & FLASH_STATUS_DONE)){
if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
printf("Flash protect timeout at address %lx\n", info->start[sector]);
addr[0] = FLASH_CMD_RESET;
return (1);
}
}
/* Set software protect flag */
info->protect[sector] = prot;
*addr = FLASH_CMD_RESET;
return (0);
}
/*-----------------------------------------------------------------------
* Support for flash file system (JFFS2)
*
* We use custom partition info function because we have to fit the
* file system image between first sector (containing hard reset
* configuration word) and the sector containing U-Boot image. Standard
* partition info function does not allow for last sector specification
* and assumes that the file system occupies flash bank up to and
* including bank's last sector.
*/
#if (CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CFG_JFFS_CUSTOM_PART)
#error TODO
#ifndef CFG_JFFS2_FIRST_SECTOR
#define CFG_JFFS2_FIRST_SECTOR 0
#endif
#ifndef CFG_JFFS2_FIRST_BANK
#define CFG_JFFS2_FIRST_BANK 0
#endif
#ifndef CFG_JFFS2_NUM_BANKS
#define CFG_JFFS2_NUM_BANKS 1
#endif
#define CFG_JFFS2_LAST_BANK (CFG_JFFS2_FIRST_BANK + CFG_JFFS2_NUM_BANKS - 1)
#include <jffs2/jffs2.h>
static struct part_info partition;
struct part_info *jffs2_part_info(int part_num)
{
int i;
if (part_num == 0) {
if (partition.usr_priv == 0) {
partition.offset =
(unsigned char *) flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR];
for (i = CFG_JFFS2_FIRST_BANK; i <= CFG_JFFS2_LAST_BANK; i++)
partition.size += flash_info[i].size;
partition.size -=
flash_info[CFG_JFFS2_FIRST_BANK].start[CFG_JFFS2_FIRST_SECTOR] -
flash_info[CFG_JFFS2_FIRST_BANK].start[0];
#ifdef CFG_JFFS2_LAST_SECTOR
i = flash_info[CFG_JFFS2_LAST_BANK].sector_count - 1;
partition.size -=
flash_info[CFG_JFFS2_LAST_BANK].start[i] -
flash_info[CFG_JFFS2_LAST_BANK].start[CFG_JFFS2_LAST_SECTOR];
#endif
partition.usr_priv = (void *)1;
}
return &partition;
}
return 0;
}
#endif /* JFFS2 */

View File

@@ -0,0 +1,262 @@
/*
* (C) Copyright 2004
* Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
*
* Support for the Elmeg VoVPN Gateway Module
* ------------------------------------------
* Initialize Marvell M88E6060 Switch
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
#include <asm/m8260_pci.h>
#include <net.h>
#include <miiphy.h>
#include "m88e6060.h"
#if (CONFIG_COMMANDS & CFG_CMD_NET)
static int prtTab[M88X_PRT_CNT] = { 8, 9, 10, 11, 12, 13 };
static int phyTab[M88X_PHY_CNT] = { 0, 1, 2, 3, 4 };
static m88x_regCfg_t prtCfg0[] = {
{ 4, 0x3e7c, 0x8000 },
{ 4, 0x3e7c, 0x8003 },
{ 6, 0x0fc0, 0x001e },
{ -1, 0xffff, 0x0000 }
};
static m88x_regCfg_t prtCfg1[] = {
{ 4, 0x3e7c, 0x8000 },
{ 4, 0x3e7c, 0x8003 },
{ 6, 0x0fc0, 0x001d },
{ -1, 0xffff, 0x0000 }
};
static m88x_regCfg_t prtCfg2[] = {
{ 4, 0x3e7c, 0x8000 },
{ 4, 0x3e7c, 0x8003 },
{ 6, 0x0fc0, 0x001b },
{ -1, 0xffff, 0x0000 }
};
static m88x_regCfg_t prtCfg3[] = {
{ 4, 0x3e7c, 0x8000 },
{ 4, 0x3e7c, 0x8003 },
{ 6, 0x0fc0, 0x0017 },
{ -1, 0xffff, 0x0000 }
};
static m88x_regCfg_t prtCfg4[] = {
{ 4, 0x3e7c, 0x8000 },
{ 4, 0x3e7c, 0x8003 },
{ 6, 0x0fc0, 0x000f },
{ -1, 0xffff, 0x0000 }
};
static m88x_regCfg_t *prtCfg[M88X_PRT_CNT] = {
prtCfg0,prtCfg1,prtCfg2,prtCfg3,prtCfg4,NULL
};
static m88x_regCfg_t phyCfgX[] = {
{ 4, 0xfa1f, 0x01e0 },
{ 0, 0x213f, 0x1200 },
{ 24, 0x81ff, 0x1200 },
{ -1, 0xffff, 0x0000 }
};
static m88x_regCfg_t *phyCfg[M88X_PHY_CNT] = {
phyCfgX,phyCfgX,phyCfgX,phyCfgX,NULL
};
#if 0
static void
m88e6060_dump( int devAddr )
{
int i, j;
unsigned short val[6];
printf( "M88E6060 Register Dump\n" );
printf( "====================================\n" );
printf( "PortNo 0 1 2 3 4 5\n" );
for (i=0; i<6; i++)
miiphy_read( devAddr+prtTab[i],M88X_PRT_STAT,&val[i] );
printf( "STAT %04hx %04hx %04hx %04hx %04hx %04hx\n",
val[0],val[1],val[2],val[3],val[4],val[5] );
for (i=0; i<6; i++)
miiphy_read( devAddr+prtTab[i],M88X_PRT_ID,&val[i] );
printf( "ID %04hx %04hx %04hx %04hx %04hx %04hx\n",
val[0],val[1],val[2],val[3],val[4],val[5] );
for (i=0; i<6; i++)
miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val[i] );
printf( "CNTL %04hx %04hx %04hx %04hx %04hx %04hx\n",
val[0],val[1],val[2],val[3],val[4],val[5] );
for (i=0; i<6; i++)
miiphy_read( devAddr+prtTab[i],M88X_PRT_VLAN,&val[i] );
printf( "VLAN %04hx %04hx %04hx %04hx %04hx %04hx\n",
val[0],val[1],val[2],val[3],val[4],val[5] );
for (i=0; i<6; i++)
miiphy_read( devAddr+prtTab[i],M88X_PRT_PAV,&val[i] );
printf( "PAV %04hx %04hx %04hx %04hx %04hx %04hx\n",
val[0],val[1],val[2],val[3],val[4],val[5] );
for (i=0; i<6; i++)
miiphy_read( devAddr+prtTab[i],M88X_PRT_RX,&val[i] );
printf( "RX %04hx %04hx %04hx %04hx %04hx %04hx\n",
val[0],val[1],val[2],val[3],val[4],val[5] );
for (i=0; i<6; i++)
miiphy_read( devAddr+prtTab[i],M88X_PRT_TX,&val[i] );
printf( "TX %04hx %04hx %04hx %04hx %04hx %04hx\n",
val[0],val[1],val[2],val[3],val[4],val[5] );
printf( "------------------------------------\n" );
printf( "PhyNo 0 1 2 3 4\n" );
for (i=0; i<9; i++) {
for (j=0; j<5; j++) {
miiphy_read( devAddr+phyTab[j],i,&val[j] );
}
printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n",
i,val[0],val[1],val[2],val[3],val[4] );
}
for (i=0x10; i<0x1d; i++) {
for (j=0; j<5; j++) {
miiphy_read( devAddr+phyTab[j],i,&val[j] );
}
printf( "0x%02x %04hx %04hx %04hx %04hx %04hx\n",
i,val[0],val[1],val[2],val[3],val[4] );
}
}
#endif
int
m88e6060_initialize( int devAddr )
{
static char *_f = "m88e6060_initialize:";
m88x_regCfg_t *p;
int err;
int i;
unsigned short val;
/*** reset all phys into powerdown ************************************/
for (i=0, err=0; i<M88X_PHY_CNT; i++) {
err += miiphy_read( devAddr+phyTab[i],M88X_PHY_CNTL,&val );
/* keep SpeedLSB, Duplex */
val &= 0x2100;
/* set SWReset, AnegEn, PwrDwn, RestartAneg */
val |= 0x9a00;
err += miiphy_write( devAddr+phyTab[i],M88X_PHY_CNTL,val );
}
if (err) {
printf( "%s [ERR] reset phys\n",_f );
return( -1 );
}
/*** disable all ports ************************************************/
for (i=0, err=0; i<M88X_PRT_CNT; i++) {
err += miiphy_read( devAddr+prtTab[i],M88X_PRT_CNTL,&val );
val &= 0xfffc;
err += miiphy_write( devAddr+prtTab[i],M88X_PRT_CNTL,val );
}
if (err) {
printf( "%s [ERR] disable ports\n",_f );
return( -1 );
}
/*** initialize switch ************************************************/
/* set switch mac addr */
#define ea eth_get_dev()->enetaddr
val = (ea[4] << 8) | ea[5];
err = miiphy_write( devAddr+15,M88X_GLB_MAC45,val );
val = (ea[2] << 8) | ea[3];
err += miiphy_write( devAddr+15,M88X_GLB_MAC23,val );
val = (ea[0] << 8) | ea[1];
#undef ea
val &= 0xfeff; /* clear DiffAddr */
err += miiphy_write( devAddr+15,M88X_GLB_MAC01,val );
if (err) {
printf( "%s [ERR] switch mac address register\n",_f );
return( -1 );
}
/* !DiscardExcessive, MaxFrameSize, CtrMode */
err = miiphy_read( devAddr+15,M88X_GLB_CNTL,&val );
val &= 0xd870;
val |= 0x0500;
err += miiphy_write( devAddr+15,M88X_GLB_CNTL,val );
if (err) {
printf( "%s [ERR] switch global control register\n",_f );
return( -1 );
}
/* LernDis off, ATUSize 1024, AgeTime 5min */
err = miiphy_read( devAddr+15,M88X_ATU_CNTL,&val );
val &= 0x000f;
val |= 0x2130;
err += miiphy_write( devAddr+15,M88X_ATU_CNTL,val );
if (err) {
printf( "%s [ERR] atu control register\n",_f );
return( -1 );
}
/*** initialize ports *************************************************/
for (i=0; i<M88X_PRT_CNT; i++) {
if ((p = prtCfg[i]) == NULL) {
continue;
}
while (p->reg != -1) {
err = 0;
err += miiphy_read( devAddr+prtTab[i],p->reg,&val );
val &= p->msk;
val |= p->val;
err += miiphy_write( devAddr+prtTab[i],p->reg,val );
if (err) {
printf( "%s [ERR] config port %d register %d\n",_f,i,p->reg );
/* XXX what todo */
}
p++;
}
}
/*** initialize phys **************************************************/
for (i=0; i<M88X_PHY_CNT; i++) {
if ((p = phyCfg[i]) == NULL) {
continue;
}
while (p->reg != -1) {
err = 0;
err += miiphy_read( devAddr+phyTab[i],p->reg,&val );
val &= p->msk;
val |= p->val;
err += miiphy_write( devAddr+phyTab[i],p->reg,val );
if (err) {
printf( "%s [ERR] config phy %d register %d\n",_f,i,p->reg );
/* XXX what todo */
}
p++;
}
}
udelay(100000);
return( 0 );
}
#endif

View File

@@ -0,0 +1,88 @@
/*
* (C) Copyright 2004
* Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
*
* Support for the Elmeg VoVPN Gateway Module
* ------------------------------------------
* Initialize Marvell M88E6060 Switch
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _INC_m88e6060_h_
#define _INC_m88e6060_h_
/* ************************************************************************** */
/* *** DEFINES ************************************************************** */
/* switch hw */
#define M88X_PRT_CNT 6
#define M88X_PHY_CNT 5
/* phy register offsets */
#define M88X_PHY_CNTL 0x00
#define M88X_PHY_STAT 0x00
#define M88X_PHY_ID0 0x02
#define M88X_PHY_ID1 0x03
#define M88X_PHY_ANEG_ADV 0x04
#define M88X_PHY_LPA 0x05
#define M88X_PHY_ANEG_EXP 0x06
#define M88X_PHY_NPT 0x07
#define M88X_PHY_LPNP 0x08
/* port register offsets */
#define M88X_PRT_STAT 0x00
#define M88X_PRT_ID 0x03
#define M88X_PRT_CNTL 0x04
#define M88X_PRT_VLAN 0x06
#define M88X_PRT_PAV 0x0b
#define M88X_PRT_RX 0x10
#define M88X_PRT_TX 0x11
/* global/atu register offsets */
#define M88X_GLB_STAT 0x00
#define M88X_GLB_MAC01 0x01
#define M88X_GLB_MAC23 0x02
#define M88X_GLB_MAC45 0x03
#define M88X_GLB_CNTL 0x04
#define M88X_ATU_CNTL 0x0a
#define M88X_ATU_OP 0x0b
/* id0 register - 0x02 */
#define M88X_PHY_ID0_VALUE 0x0141
/* id1 register - 0x03 */
#define M88X_PHY_ID1_VALUE 0x0c80 /* without revision ! */
/* misc */
#define M88E6060_ID ((M88X_PHY_ID0_VALUE<<16) | M88X_PHY_ID1_VALUE)
/* ************************************************************************** */
/* *** TYPEDEFS ************************************************************* */
typedef struct {
int reg;
unsigned short msk;
unsigned short val;
} m88x_regCfg_t;
/* ************************************************************************** */
/* *** PROTOTYPES *********************************************************** */
extern int m88e6060_initialize( int );
#endif /* _INC_m88e6060_h_ */

View File

@@ -0,0 +1,122 @@
/*
* (C) Copyright 2001-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Modified by Yuli Barcohen <yuli@arabellasw.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
cpu/mpc8260/start.o (.text)
*(.text)
*(.fixup)
*(.got1)
. = ALIGN(16);
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(4096);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(4096);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}
ENTRY(_start)

View File

@@ -0,0 +1,375 @@
/*
* (C) Copyright 2004
* Elmeg Communications Systems GmbH, Juergen Selent (j.selent@elmeg.de)
*
* Support for the Elmeg VoVPN Gateway Module
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
#include <asm/m8260_pci.h>
#include <miiphy.h>
#include "m88e6060.h"
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1252 */
/* PA30 */ { 1, 0, 0, 0, 0, 0 }, /* GPI BP_RES */
/* PA29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1253 */
/* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 RMII TX_EN */
/* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RMII CRS_DV */
/* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RMII RX_ERR */
/* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
/* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
/* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
/* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
/* PA21 */ { 1, 0, 0, 0, 0, 0 }, /* GPI HWID */
/* PA20 */ { 1, 0, 0, 1, 0, 1 }, /* GPO LED STATUS */
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 RMII TxD[1] */
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 RMII TxD[0] */
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RMII RxD[0] */
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RMII RxD[1] */
/* PA15 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1255 */
/* PA14 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP???? */
/* PA13 */ { 1, 0, 0, 1, 0, 1 }, /* GPO EN_BCTL1 XXX jse */
/* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* GPO SWITCH RESET */
/* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* GPO DSP SL1 RESET */
/* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* GPO DSP SL2 RESET */
/* PA9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
/* PA8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
/* PA7 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
/* PA6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
/* PA5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
/* PA4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
/* PA3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
/* PA2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
/* PA1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exit */
/* PA0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exit */
},
/* Port B configuration */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1257 */
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII CRS_DV */
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 RMII TX_EN */
/* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RX_ERR */
/* PB27 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_B2 L1TXD XXX val=0 */
/* PB26 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_B2 L1RXD XXX val,dr */
/* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1259 */
/* PB24 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B2 L1RSYNC */
/* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 RMII TxD[1] */
/* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 RMII TxD[0] */
/* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RxD[0] */
/* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 RMII RxD[1] */
/* PB19 */ { 1, 0, 0, 1, 0, 1 }, /* GPO PHY MDC */
/* PB18 */ { 1, 0, 0, 0, 0, 0 }, /* GPIO PHY MDIO */
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exist */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PC30 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PC29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1183 */
/* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1184 */
/* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* CLK5 TDM_A1 RX */
/* PC26 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1185 */
/* PC25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1178 */
/* PC24 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1186 */
/* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* CLK9 TDM_B2 RX */
/* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* CLK10 FCC1 RMII REFCLK */
/* PC21 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1187 */
/* PC20 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1182 */
/* PC19 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1188 */
/* PC18 */ { 1, 0, 0, 1, 0, 0 }, /* GPO HW RESET */
/* PC17 */ { 1, 1, 0, 1, 0, 0 }, /* BRG8 SWITCH CLKIN */
/* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* CLK16 FCC2 RMII REFCLK */
/* PC15 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_3 */
/* PC14 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_2 */
/* PC13 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_1 */
/* PC12 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL1_MTYPE_0 */
/* PC11 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1176 */
/* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1177 */
/* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_3 */
/* PC8 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_2 */
/* PC7 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_1 */
/* PC6 */ { 1, 0, 0, 0, 0, 0 }, /* GPI SL2_MTYPE_0 */
/* PC5 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
/* PC4 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
/* PC3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PC2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1192 */
/* PC0 */ { 1, 0, 0, 0, 0, 0 }, /* GPI RACK */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1193 */
/* PD30 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1194 */
/* PD29 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1195 */
/* PD28 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD26 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD25 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1179 */
/* PD24 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1180 */
/* PD23 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1181 */
/* PD22 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_A2 L1TXD */
/* PD21 */ { 1, 1, 1, 0, 1, 0 }, /* TDM_A2 L1RXD */
/* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */
/* PD19 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1196 */
/* PD18 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1197 */
/* PD17 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1198 */
/* PD16 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1199 */
/* PD15 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1250 */
/* PD14 */ { 1, 0, 0, 1, 0, 0 }, /* GPO TP1251 */
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD7 */ { 0, 0, 0, 1, 0, 0 }, /* GPO FL_BYTE */
/* PD6 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD5 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD4 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin does not exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin does not exist */
}
};
void reset_phy (void)
{
volatile ioport_t *iop;
#if (CONFIG_COMMANDS & CFG_CMD_NET)
int i;
unsigned short val;
#endif
iop = ioport_addr((immap_t *)CFG_IMMR, 0);
/* Reset the PHY */
iop->pdat &= 0xfff7ffff; /* PA12 = |SWITCH_RESET */
#if (CONFIG_COMMANDS & CFG_CMD_NET)
udelay(20000);
iop->pdat |= 0x00080000;
for (i=0; i<100; i++) {
udelay(20000);
if (miiphy_read( CFG_PHY_ADDR,2,&val ) == 0) {
break;
}
}
/* initialize switch */
m88e6060_initialize( CFG_PHY_ADDR );
#endif
}
static unsigned long UPMATable[] = {
0x8fffec00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, //Words 0 to 3
0x0ffcfc04, 0x3ffdfc00, 0xfffffc01, 0xfffffc01, //Words 4 to 7
0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 8 to 11
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 12 to 15
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 16 to 19
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 20 to 23
0x8fffec00, 0x00fffc00, 0x00fffc00, 0x00fffc00, //Words 24 to 27
0x0ffffc04, 0xfffffc01, 0xfffffc01, 0xfffffc01, //Words 28 to 31
0xfffffc00, 0xfffffc01, 0xfffffc01, 0xfffffc00, //Words 32 to 35
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 36 to 39
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 40 to 43
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 44 to 47
0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 48 to 51
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 52 to 55
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 56 to 59
0xffffec00, 0xffffec04, 0xffffec00, 0xfffffc01 //Words 60 to 63
};
int board_early_init_f (void)
{
volatile immap_t *immap;
volatile memctl8260_t *memctl;
volatile unsigned char *dummy;
int i;
immap = (immap_t *) CFG_IMMR;
memctl = &immap->im_memctl;
#if 0
/* CS2-5 - DSP via UPMA */
dummy = (volatile unsigned char *) (memctl->memc_br2 & BRx_BA_MSK);
memctl->memc_mar = 0;
memctl->memc_mamr = MxMR_OP_WARR;
for (i = 0; i < 64; i++) {
memctl->memc_mdr = UPMATable[i];
*dummy = 0;
}
memctl->memc_mamr = 0x00044440;
#else
/* CS7 - DPRAM via UPMA */
dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK);
memctl->memc_mar = 0;
memctl->memc_mamr = MxMR_OP_WARR;
for (i = 0; i < 64; i++) {
memctl->memc_mdr = UPMATable[i];
*dummy = 0;
}
memctl->memc_mamr = 0x00044440;
#endif
return 0;
}
int misc_init_r (void)
{
volatile ioport_t *iop;
unsigned char temp;
#if 0
/* DUMP UPMA RAM */
volatile immap_t *immap;
volatile memctl8260_t *memctl;
volatile unsigned char *dummy;
unsigned char c;
int i;
immap = (immap_t *) CFG_IMMR;
memctl = &immap->im_memctl;
dummy = (volatile unsigned char *) (memctl->memc_br7 & BRx_BA_MSK);
memctl->memc_mar = 0;
memctl->memc_mamr = MxMR_OP_RARR;
for (i = 0; i < 64; i++) {
c = *dummy;
printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i,
memctl->memc_mamr,
memctl->memc_mar,
memctl->memc_mdr );
}
memctl->memc_mamr = 0x00044440;
#endif
/* enable buffers (DSP, DPRAM) */
iop = ioport_addr((immap_t *)CFG_IMMR, 0);
iop->pdat &= 0xfffbffff; /* PA13 = |EN_M_BCTL1 */
/* destroy DPRAM magic */
*(volatile unsigned char *)0xf0500000 = 0x00;
/* clear any pending DPRAM irq */
temp = *(volatile unsigned char *)0xf05003ff;
/* write module-id into DPRAM */
*(volatile unsigned char *)0xf0500201 = 0x50;
return 0;
}
#if defined(CONFIG_HAVE_OWN_RESET)
int
do_reset (void *cmdtp, int flag, int argc, char *argv[])
{
volatile ioport_t *iop;
iop = ioport_addr((immap_t *)CFG_IMMR, 2);
iop->pdat |= 0x00002000; /* PC18 = HW_RESET */
return 1;
}
#endif /* CONFIG_HAVE_OWN_RESET */
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8260_CLKIN) + 1)
long int initdram (int board_type)
{
#ifndef CFG_RAMBOOT
volatile immap_t *immap;
volatile memctl8260_t *memctl;
volatile uchar *ramaddr;
int i;
uchar c;
immap = (immap_t *) CFG_IMMR;
memctl = &immap->im_memctl;
ramaddr = (uchar *) CFG_SDRAM_BASE;
c = 0xff;
immap->im_siu_conf.sc_ppc_acr = 0x02;
immap->im_siu_conf.sc_ppc_alrh = 0x01267893;
immap->im_siu_conf.sc_ppc_alrl = 0x89abcdef;
immap->im_siu_conf.sc_tescr1 = 0x00000000;
immap->im_siu_conf.sc_tescr2 = 0x00000000;
memctl->memc_mptpr = CFG_MPTPR;
memctl->memc_psrt = CFG_PSRT;
memctl->memc_or1 = CFG_OR1_PRELIM;
memctl->memc_br1 = CFG_SDRAM_BASE | CFG_BR1_PRELIM;
/* Precharge all banks */
memctl->memc_psdmr = CFG_PSDMR | 0x28000000;
*ramaddr = c;
/* CBR refresh */
memctl->memc_psdmr = CFG_PSDMR | 0x08000000;
for (i = 0; i < 8; i++)
*ramaddr = c;
/* Mode Register write */
memctl->memc_psdmr = CFG_PSDMR | 0x18000000;
*ramaddr = c;
/* Refresh enable */
memctl->memc_psdmr = CFG_PSDMR | 0x40000000;
*ramaddr = c;
#endif /* CFG_RAMBOOT */
return (CFG_SDRAM_SIZE);
}
int checkboard (void)
{
#ifdef CONFIG_CLKIN_66MHz
puts ("Board: Elmeg VoVPN Gateway Module (66MHz)\n");
#else
puts ("Board: Elmeg VoVPN Gateway Module (100MHz)\n");
#endif
return 0;
}

46
board/hmi1001/Makefile Normal file
View File

@@ -0,0 +1,46 @@
#
# (C) Copyright 2003-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS := $(BOARD).o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak .depend
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-include .depend
#########################################################################

41
board/hmi1001/config.mk Normal file
View File

@@ -0,0 +1,41 @@
#
# (C) Copyright 2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# INKA 4X0 board:
#
# Valid values for TEXT_BASE are:
#
# 0xFFE00000 boot high
#
# 0x00100000 boot from RAM (for testing only)
#
ifndef TEXT_BASE
## Standard: boot high
TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
#TEXT_BASE = 0x00100000
endif
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board

172
board/hmi1001/hmi1001.c Normal file
View File

@@ -0,0 +1,172 @@
/*
* (C) Copyright 2003-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
* (C) Copyright 2004
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc5xxx.h>
#include <pci.h>
#ifndef CFG_RAMBOOT
static void sdram_start (int hi_addr)
{
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
/* unlock mode register */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
__asm__ volatile ("sync");
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set mode register: extended mode */
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
__asm__ volatile ("sync");
/* set mode register: reset DLL */
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
__asm__ volatile ("sync");
#endif
/* precharge all banks */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
__asm__ volatile ("sync");
/* auto refresh */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
__asm__ volatile ("sync");
/* set mode register */
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
__asm__ volatile ("sync");
/* normal operation */
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
__asm__ volatile ("sync");
}
#endif
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
* use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
* is something else than 0x00000000.
*/
long int initdram (int board_type)
{
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
ulong test1, test2;
/* setup SDRAM chip selects */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
__asm__ volatile ("sync");
/* setup config registers */
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
__asm__ volatile ("sync");
#if SDRAM_DDR
/* set tap delay */
*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
__asm__ volatile ("sync");
#endif
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
sdram_start(1);
test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000);
if (test1 > test2) {
sdram_start(0);
dramsize = test1;
} else {
dramsize = test2;
}
/* memory smaller than 1MB is impossible */
if (dramsize < (1 << 20)) {
dramsize = 0;
}
/* set SDRAM CS0 size according to the amount of RAM found */
if (dramsize > 0) {
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
__builtin_ffs(dramsize >> 20) - 1;
} else {
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
}
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
#else /* CFG_RAMBOOT */
/* retrieve size of memory connected to SDRAM CS0 */
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
if (dramsize >= 0x13) {
dramsize = (1 << (dramsize - 0x13)) << 20;
} else {
dramsize = 0;
}
/* retrieve size of memory connected to SDRAM CS1 */
dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
if (dramsize2 >= 0x13) {
dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
} else {
dramsize2 = 0;
}
#endif /* CFG_RAMBOOT */
/* return dramsize + dramsize2; */
return dramsize;
}
int checkboard (void)
{
puts ("Board: HMI1001\n");
return 0;
}
int misc_init_f (void)
{
return 0;
}
int board_early_init_r (void)
{
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
*(vu_long *)MPC5XXX_BOOTCS_START =
*(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE);
*(vu_long *)MPC5XXX_BOOTCS_STOP =
*(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE);
return 0;
}

133
board/hmi1001/u-boot.lds Normal file
View File

@@ -0,0 +1,133 @@
/*
* (C) Copyright 2003-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
/* WARNING - the following is hand-optimized to fit within */
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/mpc5xxx/start.o (.text)
cpu/mpc5xxx/traps.o (.text)
lib_generic/crc32.o (.text)
lib_ppc/cache.o (.text)
lib_ppc/time.o (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/environment.o (.ppcenv)
*(.text)
*(.fixup)
*(.got1)
. = ALIGN(16);
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(4096);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(4096);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}

View File

@@ -133,10 +133,13 @@ long int initdram (int board_type)
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
/* find RAM size using SDRAM CS1 only */
sdram_start(0);
test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
sdram_start(1);
test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize)
sdram_start(0);
test2 = test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize) {
sdram_start(1);
test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
}
if (test1 > test2) {
sdram_start(0);
dramsize2 = test1;

40
board/ids8247/Makefile Normal file
View File

@@ -0,0 +1,40 @@
#
# (C) Copyright 2005
# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
$(LIB): .depend $(OBJS)
$(AR) crv $@ $(OBJS)
#########################################################################
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
sinclude .depend
#########################################################################

34
board/ids8247/config.mk Normal file
View File

@@ -0,0 +1,34 @@
#
# (C) Copyright 2005
# Heiko Schocher, DENX Software Engineering, <hs@denx.de>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
#
# IDS 8247 Board
#
# This should be equal to the CFG_FLASH_BASE define in config_IDS8247.h
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
TEXT_BASE = 0xfff00000
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)

484
board/ids8247/flash.c Normal file
View File

@@ -0,0 +1,484 @@
/*
* (C) Copyright 2005
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>
*
* (C) Copyright 2001
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
*
* (C) Copyright 2001-2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#undef DEBUG
#include <common.h>
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
#if defined(CFG_ENV_IS_IN_FLASH)
# ifndef CFG_ENV_ADDR
# define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
# endif
# ifndef CFG_ENV_SIZE
# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
# endif
# ifndef CFG_ENV_SECT_SIZE
# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
# endif
#endif
/*-----------------------------------------------------------------------
* Protection Flags:
*/
#define FLAG_PROTECT_SET 0x01
#define FLAG_PROTECT_CLEAR 0x02
/* Board support for 1 or 2 flash devices */
#undef FLASH_PORT_WIDTH32
#undef FLASH_PORT_WIDTH16
#define FLASH_PORT_WIDTH8
#ifdef FLASH_PORT_WIDTH16
#define FLASH_PORT_WIDTH ushort
#define FLASH_PORT_WIDTHV vu_short
#elif FLASH_PORT_WIDTH32
#define FLASH_PORT_WIDTH ulong
#define FLASH_PORT_WIDTHV vu_long
#else /* FLASH_PORT_WIDTH8 */
#define FLASH_PORT_WIDTH uchar
#define FLASH_PORT_WIDTHV vu_char
#endif
#define FPW FLASH_PORT_WIDTH
#define FPWV FLASH_PORT_WIDTHV
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (FPWV * addr, flash_info_t * info);
static int write_data (flash_info_t * info, ulong dest, FPW data);
static void flash_get_offsets (ulong base, flash_info_t * info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
unsigned long size_b0;
int i;
volatile immap_t * immr = (immap_t *)CFG_IMMR;
volatile memctl8260_t *memctl = &immr->im_memctl;
/* Init: no FLASHes known */
for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size ((FPW *) CFG_FLASH0_BASE, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0 << 20);
}
memctl->memc_or0 = 0xff800060;
memctl->memc_br0 = 0xff800801;
flash_get_offsets (0xff800000, &flash_info[0]);
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
(void) flash_protect (FLAG_PROTECT_SET,
CFG_MONITOR_BASE,
CFG_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0]);
#endif
#ifdef CFG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect (FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
&flash_info[0]);
#endif
flash_info[0].size = size_b0;
return (size_b0);
}
/*-----------------------------------------------------------------------
*/
static void flash_get_offsets (ulong base, flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
return;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
for (i = 0; i < info->sector_count; i++) {
info->start[i] = base + (i * 0x00020000);
}
}
}
/*-----------------------------------------------------------------------
*/
void flash_print_info (flash_info_t * info)
{
int i;
if (info->flash_id == FLASH_UNKNOWN) {
printf ("missing or unknown FLASH type\n");
return;
}
switch (info->flash_id & FLASH_VENDMASK) {
case FLASH_MAN_INTEL:
printf ("INTEL ");
break;
default:
printf ("Unknown Vendor ");
break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
case FLASH_28F320J3A:
printf ("28F320J3A\n");
break;
case FLASH_28F640J3A:
printf ("28F640J3A\n");
break;
case FLASH_28F128J3A:
printf ("28F128J3A\n");
break;
default:
printf ("Unknown Chip Type\n");
break;
}
printf (" Size: %ld MB in %d Sectors\n",
info->size >> 20, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s",
info->start[i],
info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
return;
}
/*-----------------------------------------------------------------------
*/
/*-----------------------------------------------------------------------
*/
/*
* The following code cannot be run from FLASH!
*/
static ulong flash_get_size (FPWV * addr, flash_info_t * info)
{
FPW value;
addr[0] = (FPW) 0x00900090;
value = addr[0];
debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
switch (value) {
case (FPW) INTEL_MANUFACT:
info->flash_id = FLASH_MAN_INTEL;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
return (0); /* no or unknown flash */
}
#ifdef FLASH_PORT_WIDTH8
value = addr[2]; /* device ID */
#else
value = addr[1]; /* device ID */
#endif
debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
switch (value) {
case (FPW) INTEL_ID_28F320J3A:
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x00400000;
break; /* => 4 MB */
case (FPW) INTEL_ID_28F640J3A:
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x00800000;
break; /* => 8 MB */
case (FPW) INTEL_ID_28F128J3A:
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x01000000;
break; /* => 16 MB */
default:
info->flash_id = FLASH_UNKNOWN;
break;
}
if (info->sector_count > CFG_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
info->sector_count, CFG_MAX_FLASH_SECT);
info->sector_count = CFG_MAX_FLASH_SECT;
}
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
return (info->size);
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
int flag, prot, sect;
ulong type, start, now, last;
int rcode = 0;
if ((s_first < 0) || (s_first > s_last)) {
if (info->flash_id == FLASH_UNKNOWN) {
printf ("- missing\n");
} else {
printf ("- no sectors to erase\n");
}
return 1;
}
type = (info->flash_id & FLASH_VENDMASK);
if ((type != FLASH_MAN_INTEL)) {
printf ("Can't erase unknown flash type %08lx - aborted\n",
info->flash_id);
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
start = get_timer (0);
last = start;
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
FPWV *addr = (FPWV *) (info->start[sect]);
FPW status;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
*addr = (FPW) 0x00500050; /* clear status register */
*addr = (FPW) 0x00200020; /* erase setup */
*addr = (FPW) 0x00D000D0; /* erase confirm */
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts ();
/* wait at least 80us - let's wait 1 ms */
udelay (1000);
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) 0x00B000B0; /* suspend erase */
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
rcode = 1;
break;
}
/* show that we're waiting */
if ((now - last) > 1000) { /* every second */
putc ('.');
last = now;
}
}
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
}
}
printf (" done\n");
return rcode;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
* 4 - Flash not identified
*/
int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
ulong cp, wp;
FPW data;
int i, l, rc, port_width;
if (info->flash_id == FLASH_UNKNOWN) {
return 4;
}
/* get lower word aligned address */
#ifdef FLASH_PORT_WIDTH16
wp = (addr & ~1);
port_width = 2;
#elif defined(FLASH_PORT_WIDTH32)
wp = (addr & ~3);
port_width = 4;
#else
wp = addr;
port_width = 1;
#endif
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
for (i = 0, cp = wp; i < l; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
for (; i < port_width && cnt > 0; ++i) {
data = (data << 8) | *src++;
--cnt;
++cp;
}
for (; cnt == 0 && i < port_width; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
if ((rc = write_data (info, wp, data)) != 0) {
return (rc);
}
wp += port_width;
}
/*
* handle word aligned part
*/
while (cnt >= port_width) {
data = 0;
for (i = 0; i < port_width; ++i) {
data = (data << 8) | *src++;
}
if ((rc = write_data (info, wp, data)) != 0) {
return (rc);
}
wp += port_width;
cnt -= port_width;
}
if (cnt == 0) {
return (0);
}
/*
* handle unaligned tail bytes
*/
data = 0;
for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
data = (data << 8) | *src++;
--cnt;
}
for (; i < port_width; ++i, ++cp) {
data = (data << 8) | (*(uchar *) cp);
}
return (write_data (info, wp, data));
}
/*-----------------------------------------------------------------------
* Write a word or halfword to Flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
static int write_data (flash_info_t * info, ulong dest, FPW data)
{
FPWV *addr = (FPWV *) dest;
ulong status;
ulong start;
int flag;
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) {
printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr);
return (2);
}
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts ();
*addr = (FPW) 0x00400040; /* write setup */
*addr = data;
/* re-enable interrupts if necessary */
if (flag)
enable_interrupts ();
start = get_timer (0);
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
}
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (0);
}

318
board/ids8247/ids8247.c Normal file
View File

@@ -0,0 +1,318 @@
/*
* (C) Copyright 2005
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 COL */
/* PA30 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 CRS */
/* PA29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
/* PA28 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
/* PA27 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
/* PA26 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
/* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */
#if defined(CONFIG_SOFT_I2C)
/* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */
/* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */
#else /* normal I/O port pins */
/* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */
/* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */
#endif
/* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */
/* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
/* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
/* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
/* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
/* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
/* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
/* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
/* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
/* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */
/* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */
/* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */
/* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */
/* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
/* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
/* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
/* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */
/* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
/* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
/* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
/* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
},
/* Port B configuration */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
/* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
/* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
/* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
/* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
/* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
/* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
/* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
/* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
/* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
/* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
/* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */
/* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */
/* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */
/* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */
/* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */
/* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */
/* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */
/* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */
/* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */
/* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
/* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */
/* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */
/* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
/* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
/* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */
/* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */
/* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */
/* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */
/* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
/* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
/* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
/* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
/* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
/* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
/* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */
/* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
/* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
/* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
/* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */
/* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */
/* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
/* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
/* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
/* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
/* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
/* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
/* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
/* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
/* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
/* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
/* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */
/* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
/* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */
/* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */
/* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */
/* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */
/* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */
/* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */
/* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */
/* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */
/* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */
/* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */
#if defined(CONFIG_HARD_I2C)
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */
#else /* normal I/O port pins */
/* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */
/* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */
#endif
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */
/* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */
/* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* MII_MDIO */
/* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
/* ------------------------------------------------------------------------- */
/* Check Board Identity:
*/
int checkboard (void)
{
puts ("Board: IDS 8247\n");
return 0;
}
/* ------------------------------------------------------------------------- */
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
*
* This routine performs standard 8260 initialization sequence
* and calculates the available memory size. It may be called
* several times to try different SDRAM configurations on both
* 60x and local buses.
*/
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
ulong orx, volatile uchar * base)
{
volatile uchar c = 0xff;
volatile uint *sdmr_ptr;
volatile uint *orx_ptr;
ulong maxsize, size;
int i;
/* We must be able to test a location outsize the maximum legal size
* to find out THAT we are outside; but this address still has to be
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff)) / 2;
sdmr_ptr = &memctl->memc_psdmr;
orx_ptr = &memctl->memc_or2;
*orx_ptr = orx;
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*
* 1. Issue a PRECHARGE-ALL-BANKS command
* 2. Issue eight CBR REFRESH commands
* 3. Issue a MODE-SET command to initialize the mode register
*
* The initial commands are executed by setting P/LSDMR[OP] and
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
* get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++)
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
*(base + CFG_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
size = get_ram_size((long *)base, maxsize);
*orx_ptr = orx | ~(size - 1);
return (size);
}
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
long psize, lsize;
psize = 16 * 1024 * 1024;
lsize = 0;
memctl->memc_psrt = CFG_PSRT;
memctl->memc_mptpr = CFG_MPTPR;
#ifndef CFG_RAMBOOT
/* 60x SDRAM setup:
*/
psize = try_init (memctl, CFG_PSDMR, CFG_OR2,
(uchar *) CFG_SDRAM_BASE);
#endif /* CFG_RAMBOOT */
icache_enable ();
return (psize);
}
int misc_init_r (void)
{
DECLARE_GLOBAL_DATA_PTR;
gd->bd->bi_flashstart = 0xff800000;
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
extern ulong
nand_probe (ulong physadr);
void
nand_init (void)
{
ulong totlen = 0;
debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE);
totlen += nand_probe (CFG_NAND0_BASE);
printf ("%4lu MB\n", totlen >>20);
}
#endif /* CFG_CMD_NAND */

123
board/ids8247/u-boot.lds Normal file
View File

@@ -0,0 +1,123 @@
/*
* (C) Copyright 2001
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_ARCH(powerpc)
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
/* Do we need any of these for elf?
__DYNAMIC = 0; */
SECTIONS
{
/* Read-only sections, merged into text segment: */
. = + SIZEOF_HEADERS;
.interp : { *(.interp) }
.hash : { *(.hash) }
.dynsym : { *(.dynsym) }
.dynstr : { *(.dynstr) }
.rel.text : { *(.rel.text) }
.rela.text : { *(.rela.text) }
.rel.data : { *(.rel.data) }
.rela.data : { *(.rela.data) }
.rel.rodata : { *(.rel.rodata) }
.rela.rodata : { *(.rela.rodata) }
.rel.got : { *(.rel.got) }
.rela.got : { *(.rela.got) }
.rel.ctors : { *(.rel.ctors) }
.rela.ctors : { *(.rela.ctors) }
.rel.dtors : { *(.rel.dtors) }
.rela.dtors : { *(.rela.dtors) }
.rel.bss : { *(.rel.bss) }
.rela.bss : { *(.rela.bss) }
.rel.plt : { *(.rel.plt) }
.rela.plt : { *(.rela.plt) }
.init : { *(.init) }
.plt : { *(.plt) }
.text :
{
cpu/mpc8260/start.o (.text)
*(.text)
common/environment.o(.text)
*(.fixup)
*(.got1)
. = ALIGN(16);
*(.rodata)
*(.rodata1)
*(.rodata.str1.4)
}
.fini : { *(.fini) } =0
.ctors : { *(.ctors) }
.dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x0FFF) & 0xFFFFF000;
_erotext = .;
PROVIDE (erotext = .);
.reloc :
{
*(.got)
_GOT2_TABLE_ = .;
*(.got2)
_FIXUP_TABLE_ = .;
*(.fixup)
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
__fixup_entries = (. - _FIXUP_TABLE_) >> 2;
.data :
{
*(.data)
*(.data1)
*(.sdata)
*(.sdata2)
*(.dynamic)
CONSTRUCTORS
}
_edata = .;
PROVIDE (edata = .);
__u_boot_cmd_start = .;
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(4096);
__init_begin = .;
.text.init : { *(.text.init) }
.data.init : { *(.data.init) }
. = ALIGN(4096);
__init_end = .;
__bss_start = .;
.bss :
{
*(.sbss) *(.scommon)
*(.dynbss)
*(.bss)
*(COMMON)
}
_end = . ;
PROVIDE (end = .);
}

View File

@@ -173,6 +173,7 @@ void flash_preinit(void)
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
}
#define GPIO_WKUP_7 0x80000000UL
#define GPIO_PSC3_9 0x04000000UL
int misc_init_f (void)
@@ -189,13 +190,13 @@ int misc_init_f (void)
/* Initialize GPIO output pins.
*/
/* Configure GPT as GPIO output */
/* Configure GPT as GPIO output (and set them as they control low-active LEDs */
*(vu_long *)MPC5XXX_GPT0_ENABLE =
*(vu_long *)MPC5XXX_GPT1_ENABLE =
*(vu_long *)MPC5XXX_GPT2_ENABLE =
*(vu_long *)MPC5XXX_GPT3_ENABLE =
*(vu_long *)MPC5XXX_GPT4_ENABLE =
*(vu_long *)MPC5XXX_GPT5_ENABLE = 0x24;
*(vu_long *)MPC5XXX_GPT5_ENABLE = 0x34;
/* Configure GPT7 as PWM timer, 1kHz, no ints. */
*(vu_long *)MPC5XXX_GPT7_ENABLE = 0;/* Disable */
@@ -216,6 +217,8 @@ int misc_init_f (void)
*(vu_long *)MPC5XXX_WU_GPIO_ENABLE |= 0xc4000000;
*(vu_long *)MPC5XXX_WU_GPIO_DIR |= 0xc4000000;
/* Set LR mirror bit because it is low-active */
*(vu_long *)MPC5XXX_WU_GPIO_DATA |= GPIO_WKUP_7;
/*
* Reset Coral-P graphics controller
*/

View File

@@ -236,14 +236,14 @@ static ulong flash_get_size (FPW * addr, flash_info_t * info)
info->flash_id +=FLASH_28F256K3;
info->sector_count = 259;
info->size = 0x02000000;
printf ("\Intel StrataFlash 28F256K3C device initialized\n");
debug ("Intel StrataFlash 28F256K3C device initialized\n");
break; /* => 32 MB */
case (FPW) (INTEL_ID_28F128J3A):
info->flash_id +=FLASH_28F128J3A;
info->sector_count = 259;
info->size = 0x02000000;
printf ("\Micron StrataFlash MT28F128J3 device initialized\n");
debug ("Micron StrataFlash MT28F128J3 device initialized\n");
break; /* => 32 MB */
default:

View File

@@ -133,10 +133,13 @@ long int initdram (int board_type)
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
/* find RAM size using SDRAM CS1 only */
sdram_start(0);
test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
sdram_start(1);
test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize)
sdram_start(0);
test2 = test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
if (!dramsize) {
sdram_start(1);
test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
}
if (test1 > test2) {
sdram_start(0);
dramsize2 = test1;

View File

@@ -25,6 +25,7 @@
#include <mpc8220.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <pci.h>
long int initdram (int board_type)
{
@@ -41,3 +42,19 @@ int checkboard (void)
return 0;
}
#if defined(CONFIG_PCI)
/*
* Initialize PCI devices, report devices found.
*/
static struct pci_controller hose;
#endif /* CONFIG_PCI */
void pci_init_board (void)
{
#ifdef CONFIG_PCI
extern void pci_mpc8220_init (struct pci_controller *hose);
pci_mpc8220_init (&hose);
#endif /* CONFIG_PCI */
}

View File

@@ -28,6 +28,7 @@
#include <common.h>
#include <mpc8xx.h>
#include <i2c.h>
#include <miiphy.h>
/*********************************************************************/
@@ -252,6 +253,14 @@ int misc_init_r (void)
val |= 0x80;
i2c_reg_write (CFG_I2C_RTC_ADDR, 0x0D, val);
/*
* Configure PHY to setup LED's correctly and use 100MBit, FD
*/
mii_init();
miiphy_write(0, PHY_BMCR, 0x2100); /* disable auto-negotiation, 100mbit, full-duplex */
miiphy_write(0, PHY_FCSCR, 0x4122); /* set LED's to Link, Transmit, Receive */
return 0;
}

View File

@@ -261,7 +261,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
name = "Standalone Application";
/* A second argument overwrites the load address */
if (argc > 2) {
hdr->ih_load = simple_strtoul(argv[2], NULL, 16);
hdr->ih_load = htonl(simple_strtoul(argv[2], NULL, 16));
}
break;
case IH_TYPE_KERNEL:

View File

@@ -175,10 +175,9 @@ do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
int
do_jffs2_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
struct part_info* jffs2_part_info(int);
int jffs2_1pass_ls(struct part_info *,char *);
char *filename = "/";
struct part_info* jffs2_part_info(int);
int jffs2_1pass_ls(struct part_info *,char *);
char *filename = "/";
int ret;
struct part_info *part;
@@ -235,11 +234,11 @@ do_jffs2_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int tmp_part;
char str_part_num[3];
struct part_info* jffs2_part_info(int);
struct part_info* jffs2_part_info(int);
if (argc >= 2) {
if (argc >= 2) {
tmp_part = simple_strtoul(argv[1], NULL, 16);
}else{
} else {
puts ("Need partition number in argument list\n");
return 0;

View File

@@ -670,11 +670,12 @@ static int NanD_IdentChip(struct nand_chip *nand, int floor, int chip)
id = READ_NAND(nand->IO_ADDR);
NAND_DISABLE_CE(nand); /* set pin high */
/* No response - return failure */
if (mfr == 0xff || mfr == 0) {
#ifdef NAND_DEBUG
printf("NanD_Command (ReadID) got %d %d\n", mfr, id);
printf("NanD_Command (ReadID) got %x %x\n", mfr, id);
#endif
if (mfr == 0xff || mfr == 0) {
/* No response - return failure */
return 0;
}
@@ -1218,6 +1219,8 @@ static int nand_write_page (struct nand_chip *nand,
}
if (nand->bus16) {
for (i = 0; i < nand->oobsize; i += 2) {
u16 val;
val = READ_NAND (nand->IO_ADDR);
nand->data_buf[i] = val & 0xff;
nand->data_buf[i + 1] = val >> 8;

View File

@@ -72,6 +72,9 @@ int universe_init(void)
dev->busdevfn = busdevfn;
pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_1, &val);
if (val & 1) {
pci_read_config_dword(busdevfn, PCI_BASE_ADDRESS_0, &val);
}
val &= ~0xf;
dev->uregs = (UNIVERSE *)val;
@@ -102,7 +105,13 @@ int universe_init(void)
* Arbitration Mode
* DTACK Enable
*/
writel(0x15060000, &dev->uregs->misc_ctl);
writel(0x15040000 | (readl(&dev->uregs->misc_ctl) & 0x00020000), &dev->uregs->misc_ctl);
if (readl(&dev->uregs->misc_ctl) & 0x00020000) {
debug ("System Controller!\n"); /* test-only */
} else {
debug ("Not System Controller!\n"); /* test-only */
}
/*
* Lets turn off interrupts
@@ -114,12 +123,14 @@ int universe_init(void)
writel(0x0000, &dev->uregs->lint_map1); /* Map all ints to 0 */
eieio();
return 0;
break_30:
free(dev);
break_20:
lastError = result;
return 0;
return result;
}
@@ -193,13 +204,13 @@ int universe_pci_slave_window(unsigned int pciAddr, unsigned int vmeAddr, int si
switch (pms & PCI_MS_Mxx) {
case PCI_MS_MEM:
ctl = 0x00000000;
ctl |= 0x00000000;
break;
case PCI_MS_IO:
ctl = 0x00000001;
ctl |= 0x00000001;
break;
case PCI_MS_CONFIG:
ctl = 0x00000002;
ctl |= 0x00000002;
break;
}
@@ -278,13 +289,13 @@ int universe_vme_slave_window(unsigned int vmeAddr, unsigned int pciAddr, int si
switch (pms & PCI_MS_Mxx) {
case PCI_MS_MEM:
ctl = 0x00000000;
ctl |= 0x00000000;
break;
case PCI_MS_IO:
ctl = 0x00000001;
ctl |= 0x00000001;
break;
case PCI_MS_CONFIG:
ctl = 0x00000002;
ctl |= 0x00000002;
break;
}

View File

@@ -609,7 +609,7 @@ U_BOOT_CMD(
"usb tree - show USB device tree\n"
"usb info [dev] - show available USB devices\n"
"usb scan - (re-)scan USB bus for storage devices\n"
"usb device [dev] - show or set current USB storage device\n"
"usb dev [dev] - show or set current USB storage device\n"
"usb part [dev] - print partition table of one or all USB storage devices\n"
"usb read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
" to memory address `addr'\n"

View File

@@ -58,6 +58,15 @@
/************************************************************************/
#include <video_font.h> /* Get font data, width and height */
/************************************************************************/
/* ** LOGO DATA */
/************************************************************************/
#ifdef CONFIG_LCD_LOGO
# include <bmp_logo.h> /* Get logo data, width and height */
# if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET)
# error Default Color Map overlaps with Logo Color Map
# endif
#endif
ulong lcd_setmem (ulong addr);
@@ -269,7 +278,7 @@ static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
static inline void lcd_puts_xy (ushort x, ushort y, uchar *s)
{
#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
lcd_drawchars (x, y+BMP_LOGO_HEIGHT, s, strlen (s));
#else
lcd_drawchars (x, y, s, strlen (s));
@@ -280,7 +289,7 @@ static inline void lcd_puts_xy (ushort x, ushort y, uchar *s)
static inline void lcd_putc_xy (ushort x, ushort y, uchar c)
{
#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
lcd_drawchars (x, y+BMP_LOGO_HEIGHT, &c, 1);
#else
lcd_drawchars (x, y, &c, 1);
@@ -420,7 +429,7 @@ static int lcd_init (void *lcdbase)
/* Initialize the console */
console_col = 0;
#ifdef LCD_INFO_BELOW_LOGO
#ifdef CONFIG_LCD_INFO_BELOW_LOGO
console_row = 7 + BMP_LOGO_HEIGHT / VIDEO_FONT_HEIGHT;
#else
console_row = 1; /* leave 1 blank line below logo */
@@ -655,6 +664,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
fb = (uchar *) (lcd_base +
(y + height - 1) * lcd_line_length + x);
for (i = 0; i < height; ++i) {
WATCHDOG_RESET();
for (j = 0; j < width ; j++)
#if defined(CONFIG_PXA250)
*(fb++)=*(bmap++);
@@ -672,12 +682,12 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y)
static void *lcd_logo (void)
{
#ifdef LCD_INFO
#ifdef CONFIG_LCD_INFO
DECLARE_GLOBAL_DATA_PTR;
char info[80];
char temp[32];
#endif /* LCD_INFO */
#endif /* CONFIG_LCD_INFO */
#ifdef CONFIG_SPLASH_SCREEN
char *s;
@@ -699,7 +709,7 @@ static void *lcd_logo (void)
#endif /* CONFIG_LCD_LOGO */
#ifdef CONFIG_MPC823
#ifdef LCD_INFO
# ifdef CONFIG_LCD_INFO
sprintf (info, "%s (%s - %s) ", U_BOOT_VERSION, __DATE__, __TIME__);
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y, info, strlen(info));
@@ -710,7 +720,7 @@ static void *lcd_logo (void)
sprintf (info, " Wolfgang DENK, wd@denx.de");
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 2,
info, strlen(info));
#ifdef LCD_INFO_BELOW_LOGO
# ifdef CONFIG_LCD_INFO_BELOW_LOGO
sprintf (info, "MPC823 CPU at %s MHz",
strmhz(temp, gd->cpu_clk));
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3,
@@ -720,7 +730,7 @@ static void *lcd_logo (void)
gd->bd->bi_flashsize >> 20 );
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
info, strlen(info));
#else
# else
/* leave one blank line */
sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
@@ -730,15 +740,15 @@ static void *lcd_logo (void)
lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 4,
info, strlen(info));
# endif /* CONFIG_LCD_INFO_BELOW_LOGO */
# endif /* CONFIG_LCD_INFO */
#endif /* CONFIG_MPC823 */
#endif /* LCD_INFO_BELOW_LOGO */
#endif /* LCD_INFO */
#if defined(CONFIG_LCD_LOGO) && !defined(LCD_INFO_BELOW_LOGO)
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
return ((void *)((ulong)lcd_base + BMP_LOGO_HEIGHT * lcd_line_length));
#else
return ((void *)lcd_base);
#endif /* CONFIG_LCD_LOGO */
#endif /* CONFIG_LCD_LOGO && !CONFIG_LCD_INFO_BELOW_LOGO */
}
/************************************************************************/

View File

@@ -55,11 +55,8 @@ void serial_setbrg (void)
if ((baudrate = gd->baudrate) <= 0)
baudrate = CONFIG_BAUDRATE;
if (baudrate == 0 || baudrate == CONFIG_BAUDRATE)
us->US_BRGR = CFG_AT91C_BRGR_DIVISOR; /* hardcode so no __divsi3 */
else
/* MASTER_CLOCK/(16 * baudrate) */
us->US_BRGR = (AT91C_MASTER_CLOCK >> 4)/baudrate;
/* MASTER_CLOCK/(16 * baudrate) */
us->US_BRGR = (AT91C_MASTER_CLOCK >> 4)/baudrate;
}
int serial_init (void)

View File

@@ -0,0 +1,43 @@
#
# (C) Copyright 2000-2005
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = lib$(SOC).a
OBJS = interrupts.o serial.o
SOBJS = lowlevel_init.o
all: .depend $(LIB)
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS) $(SOBJS)
#########################################################################
.depend: Makefile $(OBJS:.o=.c)
$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
sinclude .depend
#########################################################################

View File

@@ -0,0 +1,112 @@
/*
* (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/platform.h>
/*
* Handy KS8695 register access functions.
*/
#define ks8695_read(a) *((volatile ulong *) (KS8695_IO_BASE + (a)))
#define ks8695_write(a,v) *((volatile ulong *) (KS8695_IO_BASE + (a))) = (v)
int timer_inited;
ulong timer_ticks;
int interrupt_init (void)
{
/* nothing happens here - we don't setup any IRQs */
return (0);
}
/*
* Initial timer set constants. Nothing complicated, just set for a 1ms
* tick.
*/
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_1)
#define TIMER_COUNT (TIMER_INTERVAL / 2)
#define TIMER_PULSE TIMER_COUNT
void reset_timer_masked(void)
{
/* Set the hadware timer for 1ms */
ks8695_write(KS8695_TIMER1, TIMER_COUNT);
ks8695_write(KS8695_TIMER1_PCOUNT, TIMER_PULSE);
ks8695_write(KS8695_TIMER_CTRL, 0x2);
timer_ticks = 0;
timer_inited++;
}
void reset_timer(void)
{
reset_timer_masked();
}
ulong get_timer_masked(void)
{
/* Check for timer wrap */
if (ks8695_read(KS8695_INT_STATUS) & KS8695_INTMASK_TIMERINT1) {
/* Clear interrupt condition */
ks8695_write(KS8695_INT_STATUS, KS8695_INTMASK_TIMERINT1);
timer_ticks++;
}
return timer_ticks;
}
ulong get_timer(ulong base)
{
return (get_timer_masked() - base);
}
void set_timer(ulong t)
{
timer_ticks = t;
}
void udelay(ulong usec)
{
ulong start = get_timer_masked();
ulong end;
if (!timer_inited)
reset_timer();
/* Only 1ms resolution :-( */
end = usec / 1000;
while (get_timer(start) < end)
;
}
void reset_cpu (ulong ignored)
{
ulong tc;
/* Set timer0 to watchdog, and let it timeout */
tc = ks8695_read(KS8695_TIMER_CTRL) & 0x2;
ks8695_write(KS8695_TIMER_CTRL, tc);
ks8695_write(KS8695_TIMER0, ((10 << 8) | 0xff));
ks8695_write(KS8695_TIMER_CTRL, (tc | 0x1));
/* Should only wait here till watchdog resets */
for (;;)
;
}

View File

@@ -0,0 +1,205 @@
/*
* lowlevel_init.S - basic hardware initialization for the KS8695 CPU
*
* Copyright (c) 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
#include <asm/arch/platform.h>
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
/*
*************************************************************************
*
* Handy dandy macros
*
*************************************************************************
*/
/* Delay a bit */
.macro DELAY_FOR cycles, reg0
ldr \reg0, =\cycles
subs \reg0, \reg0, #1
subne pc, pc, #0xc
.endm
/*
*************************************************************************
*
* Some local storage.
*
*************************************************************************
*/
/* Should we boot with an interactive console or not */
.globl serial_console
/*
*************************************************************************
*
* Raw hardware initialization code. The important thing is to get
* SDRAM setup and running. We do some other basic things here too,
* like getting the PLL set for high speed, and init the LEDs.
*
*************************************************************************
*/
.globl lowlevel_init
lowlevel_init:
#if DEBUG
/*
* enable UART for early debug trace
*/
ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
mov r2, #0xd9
str r2, [r1] /* 115200 baud */
ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
mov r2, #0x03
str r2, [r1] /* 8 data bits, no parity, 1 stop */
ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
mov r2, #0x41
str r2, [r1] /* write 'A' */
#endif
#if DEBUG
ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
mov r2, #0x42
str r2, [r1]
#endif
/*
* remap the memory and flash regions. we want to end up with
* ram from address 0, and flash at 32MB.
*/
ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0)
ldr r2, =0xbfc00040
str r2, [r1] /* large flash map */
ldr pc, =(highflash+0x02000000-0x00f00000) /* jump to high flash address */
highflash:
ldr r2, =0x8fe00040
str r2, [r1] /* remap flash range */
/*
* remap the second select region to the 4MB immediately after
* the first region. This way if you have a larger flash (say 8Mb)
* then you can have it all mapped nicely. Has no effect if you
* only have a 4Mb or smaller flash.
*/
ldr r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1)
ldr r2, =0x9fe40040
str r2, [r1] /* remap flash2 region, contiguous */
ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
ldr r2, =0x30000005
str r2, [r1] /* enable both flash selects */
#ifdef CONFIG_CM41xx
/*
* map the second flash chip, using the external IO lines.
*/
ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0)
ldr r2, =0xafe80b6d
str r2, [r1] /* remap io0 region, contiguous */
ldr r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1)
ldr r2, =0xbfec0b6d
str r2, [r1] /* remap io1 region, contiguous */
ldr r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
ldr r2, =0x30050005
str r2, [r1] /* enable second flash */
#endif
/*
* before relocating, we have to setup RAM timing
*/
ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL0)
#if (PHYS_SDRAM_1_SIZE == 0x02000000)
ldr r2, =0x7fc0000e /* 32MB */
#else
ldr r2, =0x3fc0000e /* 16MB */
#endif
str r2, [r1] /* configure sdram bank0 setup */
ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL1)
mov r2, #0
str r2, [r1] /* configure sdram bank1 setup */
ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_GENERAL)
ldr r2, =0x0000000a
str r2, [r1] /* set RAS/CAS timing */
ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
ldr r2, =0x00030000
str r2, [r1] /* send NOP command */
DELAY_FOR 0x100, r0
ldr r2, =0x00010000
str r2, [r1] /* send PRECHARGE-ALL */
DELAY_FOR 0x100, r0
ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_REFRESH)
ldr r2, =0x00000020
str r2, [r1] /* set for fast refresh */
DELAY_FOR 0x100, r0
ldr r2, =0x00000190
str r2, [r1] /* set normal refresh timing */
ldr r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
ldr r2, =0x00020033
str r2, [r1] /* send mode command */
DELAY_FOR 0x100, r0
ldr r2, =0x01f00000
str r2, [r1] /* enable sdram fifos */
/*
* set pll to top speed
*/
ldr r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK)
mov r2, #0
str r2, [r1] /* set pll clock to 166MHz */
ldr r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0)
ldr r2, [r1] /* Get switch ctrl0 register */
and r2, r2, #0x0fc00000 /* Mask out LED control bits */
orr r2, r2, #0x01800000 /* Set Link/activity/speed actions */
str r2, [r1]
#ifdef CONFIG_CM4008
ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_MODE)
ldr r2, =0x0000fe30
str r2, [r1] /* enable LED's as outputs */
ldr r1, =(KS8695_IO_BASE+KS8695_GPIO_DATA)
ldr r2, =0x0000fe20
str r2, [r1] /* turn on power LED */
#endif
#if defined(CONFIG_CM4008) || defined(CONFIG_CM41xx)
ldr r2, [r1] /* get current GPIO input data */
tst r2, #0x8 /* check if "erase" depressed */
beq nobutton
mov r2, #0 /* be quiet on boot, no console */
ldr r1, =serial_console
str r2, [r1]
nobutton:
#endif
add lr, lr, #0x02000000 /* flash is now mapped high */
add ip, ip, #0x02000000 /* this is a hack */
mov pc, lr /* all done, return */
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */

116
cpu/arm920t/ks8695/serial.c Normal file
View File

@@ -0,0 +1,116 @@
/*
* serial.c -- KS8695 serial driver
*
* (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/platform.h>
#ifndef CONFIG_SERIAL1
#error "Bad: you didn't configure serial ..."
#endif
/*
* Define the UART hardware register access structure.
*/
struct ks8695uart {
unsigned int RX; /* 0x00 - Receive data (r) */
unsigned int TX; /* 0x04 - Transmit data (w) */
unsigned int FCR; /* 0x08 - Fifo Control (r/w) */
unsigned int LCR; /* 0x0c - Line Control (r/w) */
unsigned int MCR; /* 0x10 - Modem Control (r/w) */
unsigned int LSR; /* 0x14 - Line Status (r/w) */
unsigned int MSR; /* 0x18 - Modem Status (r/w) */
unsigned int BD; /* 0x1c - Baud Rate (r/w) */
unsigned int SR; /* 0x20 - Status (r/w) */
};
#define KS8695_UART_ADDR ((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER))
#define KS8695_UART_CLK 25000000
/*
* Under some circumstances we want to be "quiet" and not issue any
* serial output - though we want u-boot to otherwise work and behave
* the same. By default be noisy.
*/
int serial_console = 1;
void serial_setbrg(void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
/* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/
uartp->BD = KS8695_UART_CLK / gd->baudrate;
uartp->LCR = KS8695_UART_LINEC_WLEN8;
}
int serial_init(void)
{
serial_console = 1;
serial_setbrg();
return 0;
}
void serial_raw_putc(const char c)
{
volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
int i;
for (i = 0; (i < 0x100000); i++) {
if (uartp->LSR & KS8695_UART_LINES_TXFE)
break;
}
uartp->TX = c;
}
void serial_putc(const char c)
{
if (serial_console) {
serial_raw_putc(c);
if (c == '\n')
serial_raw_putc('\r');
}
}
int serial_tstc(void)
{
volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
if (serial_console)
return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0);
return 0;
}
void serial_puts(const char *s)
{
char c;
while ((c = *s++) != 0)
serial_putc(c);
}
int serial_getc(void)
{
volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0)
;
return (uartp->RX);
}

View File

@@ -869,9 +869,10 @@ int mpc5xxx_fec_initialize(bd_t * bis)
fec->eth = (ethernet_regs *)MPC5XXX_FEC;
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
#if defined(CONFIG_CANMB) || defined(CONFIG_ICECUBE) || \
defined(CONFIG_INKA4X0) || defined(CONFIG_PM520) || \
defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200)
#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \
defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \
defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \
defined(CONFIG_TQM5200)
# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
# else

View File

@@ -154,11 +154,11 @@ serial_setbrg(void)
#if defined(CONFIG_MGT5100)
baseclk = CFG_MPC5XXX_CLKIN / 32;
#elif defined(CONFIG_MPC5200)
baseclk = gd->ipb_clk / 32;
baseclk = (gd->ipb_clk + 16) / 32;
#endif
/* set up UART divisor */
div = baseclk / gd->baudrate;
div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
psc->ctur = div >> 8;
psc->ctlr = div & 0xff;
}

View File

@@ -28,8 +28,8 @@ LIB = lib$(CPU).a
START = start.o
ASOBJS = io.o fec_dma_tasks.o
OBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
interrupts.o loadtask.o serial.o speed.o \
traps.o uart.o
interrupts.o loadtask.o speed.o \
traps.o uart.o pci.o
all: .depend $(START) $(ASOBJS) $(LIB)

View File

@@ -49,6 +49,8 @@ void cpu_init_f (void)
portcfg->pcfg1 = 0;
portcfg->pcfg2 = 0;
portcfg->pcfg3 = 0;
portcfg->pcfg2 = CFG_GP1_PORT2_CONFIG;
portcfg->pcfg3 = CFG_PCI_PORT3_CONFIG | CFG_GP2_PORT3_CONFIG;
/*
* Flexbus Controller: configure chip selects and enable them
@@ -109,7 +111,7 @@ void cpu_init_f (void)
/* Master Priority Enable */
xlbarb->mastPriority = 0;
xlbarb->mastPriEn = 0x1f;
xlbarb->mastPriEn = 0xff;
}
/*

View File

@@ -543,12 +543,7 @@ u32 dramSetup (void)
}
/* Set up the Drive Strength register */
temp = ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT)
| (DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT)
| (DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT)
| (DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT)
| (DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT));
sysconf->sdramds = temp;
sysconf->sdramds = CFG_SDRAM_DRIVE_STRENGTH;
/* ********************** Cfg 1 ************************* */

View File

@@ -14,19 +14,18 @@
#include "dma.h"
#include "fec.h"
#define DEBUG 0
/*tbd - rtm */
/*#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
defined(CONFIG_MPC8220_FEC)*/
#undef DEBUG
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
defined(CONFIG_MPC8220_FEC)
#if (CONFIG_COMMANDS & CFG_CMD_NET)
/*#if (CONFIG_COMMANDS & CFG_CMD_NET)*/
#if (DEBUG & 0x60)
#ifdef DEBUG
static void tfifo_print (mpc8220_fec_priv * fec);
static void rfifo_print (mpc8220_fec_priv * fec);
#endif /* DEBUG */
#if (DEBUG & 0x40)
#ifdef DEBUG
static u32 local_crc32 (char *string, unsigned int crc_value, int len);
#endif
@@ -38,7 +37,7 @@ typedef struct {
} NBUF;
/********************************************************************/
#if (DEBUG & 0x2)
#ifdef DEBUG
static void mpc8220_fec_phydump (void)
{
u16 phyStatus, i;
@@ -145,7 +144,7 @@ static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
{
FEC_TBD *pUsedTbd;
#if (DEBUG & 0x1)
#ifdef DEBUG
printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
fec->cleanTbdNum, fec->usedTbdIndex);
#endif
@@ -156,7 +155,7 @@ static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
while (fec->cleanTbdNum < FEC_TBD_NUM) {
pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
if (pUsedTbd->status & FEC_TBD_READY) {
#if (DEBUG & 0x20)
#ifdef DEBUG
printf ("Cannot clean TBD %d, in use\n",
fec->cleanTbdNum);
#endif
@@ -243,7 +242,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
#if (DEBUG & 0x1)
#ifdef DEBUG
printf ("mpc8220_fec_init... Begin\n");
#endif
@@ -305,7 +304,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
fec->eth->rfifo_cntrl = 0x0c000000;
fec->eth->rfifo_alarm = 0x0000030c;
#if (DEBUG & 0x22)
#ifdef DEBUG
if (fec->eth->rfifo_status & 0x00700000) {
printf ("mpc8220_fec_init() RFIFO error\n");
}
@@ -316,7 +315,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
/*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
fec->eth->tfifo_cntrl = 0x0e000000;
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
#endif
@@ -408,7 +407,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
/*
* Force 10Base-T, FDX operation
*/
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("Forcing 10 Mbps ethernet link... ");
#endif
miiphy_read (phyAddr, 0x1, &phyStatus);
@@ -421,13 +420,13 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
do { /* wait for link status to go down */
udelay (10000);
if ((timeout--) == 0) {
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("hmmm, should not have waited...");
#endif
break;
}
miiphy_read (phyAddr, 0x1, &phyStatus);
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("=");
#endif
} while ((phyStatus & 0x0004)); /* !link up */
@@ -440,12 +439,12 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
break;
}
miiphy_read (phyAddr, 0x1, &phyStatus);
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("+");
#endif
} while (!(phyStatus & 0x0004)); /* !link up */
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("done.\n");
#endif
} else { /* MII100 */
@@ -467,7 +466,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
udelay (1000);
if ((timeout--) == 0) {
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("PHY auto neg 0 failed...\n");
#endif
return -1;
@@ -475,14 +474,14 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
if (miiphy_read (phyAddr, 0x1, &phyStatus) !=
0) {
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
#endif
return -1;
}
} while (!(phyStatus & 0x0004));
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("PHY auto neg complete! \n");
#endif
}
@@ -494,7 +493,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
fec->eth->ecntrl |= 0x00000006;
#if (DEBUG & 0x2)
#ifdef DEBUG
if (fec->xcv_type != SEVENWIRE)
mpc8220_fec_phydump ();
#endif
@@ -504,7 +503,7 @@ static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
*/
DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
#if (DEBUG & 0x1)
#ifdef DEBUG
printf ("mpc8220_fec_init... Done \n");
#endif
@@ -517,7 +516,7 @@ static void mpc8220_fec_halt (struct eth_device *dev)
mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
int counter = 0xffff;
#if (DEBUG & 0x2)
#ifdef DEBUG
if (fec->xcv_type != SEVENWIRE)
mpc8220_fec_phydump ();
#endif
@@ -566,12 +565,12 @@ static void mpc8220_fec_halt (struct eth_device *dev)
*/
udelay (10);
#if (DEBUG & 0x3)
#ifdef DEBUG
printf ("Ethernet task stopped\n");
#endif
}
#if (DEBUG & 0x60)
#ifdef DEBUG
/********************************************************************/
static void tfifo_print (mpc8220_fec_priv * fec)
@@ -635,7 +634,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
FEC_TBD *pTbd;
#if (DEBUG & 0x20)
#ifdef DEBUG
printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
tfifo_print (fec);
#endif
@@ -656,7 +655,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
* Check the number of vacant TxBDs.
*/
if (fec->cleanTbdNum < 1) {
#if (DEBUG & 0x20)
#ifdef DEBUG
printf ("No available TxBDs ...\n");
#endif
return -1;
@@ -671,7 +670,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
#if (DEBUG & 0x100)
#ifdef DEBUG
printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
#endif
@@ -688,23 +687,23 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
* Enable SmartDMA transmit task
*/
#if (DEBUG & 0x20)
#ifdef DEBUG
tfifo_print (fec);
#endif
DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
#if (DEBUG & 0x20)
#ifdef DEBUG
tfifo_print (fec);
#endif
#if (DEBUG & 0x8)
#ifdef DEBUG
printf ("+");
#endif
fec->cleanTbdNum -= 1;
#if (DEBUG & 0x129) && (DEBUG & 0x80000000)
#ifdef DEBUG
printf ("smartDMA ethernet Tx task enabled\n");
#endif
/*
@@ -712,7 +711,7 @@ static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
*/
while (pTbd->status & FEC_TBD_READY) {
udelay (10);
#if (DEBUG & 0x8)
#ifdef DEBUG
printf ("TDB status = %04x\n", pTbd->status);
#endif
}
@@ -733,10 +732,8 @@ static int mpc8220_fec_recv (struct eth_device *dev)
int frame_length, len = 0;
NBUF *frame;
#if (DEBUG & 0x1)
#ifdef DEBUG
printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
#endif
#if (DEBUG & 0x8)
printf ("-");
#endif
@@ -902,7 +899,7 @@ int miiphy_read (u8 phyAddr, u8 regAddr, u16 * retVal)
while ((timeout--) && (!(eth->ievent & 0x00800000)));
if (timeout == 0) {
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("Read MDIO failed...\n");
#endif
return -1;
@@ -941,7 +938,7 @@ int miiphy_write (u8 phyAddr, u8 regAddr, u16 data)
while ((timeout--) && (!(eth->ievent & 0x00800000)));
if (timeout == 0) {
#if (DEBUG & 0x2)
#ifdef DEBUG
printf ("Write MDIO failed...\n");
#endif
return -1;
@@ -955,7 +952,7 @@ int miiphy_write (u8 phyAddr, u8 regAddr, u16 data)
return 0;
}
#if (DEBUG & 0x40)
#ifdef DEBUG
static u32 local_crc32 (char *string, unsigned int crc_value, int len)
{
int i;

191
cpu/mpc8220/pci.c Normal file
View File

@@ -0,0 +1,191 @@
/*
* Copyright 2004 Freescale Semiconductor.
* Copyright (C) 2003 Motorola Inc.
* Xianghua Xiao (x.xiao@motorola.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* PCI Configuration space access support for MPC8220 PCI Bridge
*/
#include <common.h>
#include <mpc8220.h>
#include <pci.h>
#include <asm/io.h>
#if defined(CONFIG_PCI)
/* System RAM mapped over PCI */
#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE
#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE
#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
#define cfg_read(val, addr, type, op) *val = op((type)(addr));
#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
#define PCI_OP(rw, size, type, op, mask) \
int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose, \
pci_dev_t dev, int offset, type val) \
{ \
u32 addr = 0; \
u16 cfg_type = 0; \
addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
out_be32(hose->cfg_addr, addr); \
__asm__ __volatile__("sync"); \
cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
out_be32(hose->cfg_addr, addr & 0x7fffffff); \
__asm__ __volatile__("sync"); \
return 0; \
}
PCI_OP(read, byte, u8 *, in_8, 3)
PCI_OP(read, word, u16 *, in_le16, 2)
PCI_OP(write, byte, u8, out_8, 3)
PCI_OP(write, word, u16, out_le16, 2)
PCI_OP(write, dword, u32, out_le32, 0)
int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
int offset, u32 *val)
{
u32 addr;
u32 tmpv;
u32 mask = 2; /* word access */
/* Read lower 16 bits */
addr = ((offset & 0xfc) | (dev) | 0x80000000);
out_be32(hose->cfg_addr, addr);
__asm__ __volatile__("sync");
*val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
out_be32(hose->cfg_addr, addr & 0x7fffffff);
__asm__ __volatile__("sync");
/* Read upper 16 bits */
offset += 2;
addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
out_be32(hose->cfg_addr, addr);
__asm__ __volatile__("sync");
tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
out_be32(hose->cfg_addr, addr & 0x7fffffff);
__asm__ __volatile__("sync");
/* combine results into dword value */
*val = (tmpv << 16) | *val;
return 0;
}
void
pci_mpc8220_init(struct pci_controller *hose)
{
u32 win0, win1, win2;
volatile mpc8220_xcpci_t *xcpci =
(volatile mpc8220_xcpci_t *) MMAP_XCPCI;
volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
win0 = (u32) CONFIG_PCI_MEM_PHYS;
win1 = (u32) CONFIG_PCI_IO_PHYS;
win2 = (u32) CONFIG_PCI_CFG_PHYS;
/* Assert PCI reset */
out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR);
/* Disable prefetching but read-multiples will still prefetch */
out_be32 (&xcpci->target_ctrl, 0x00000000);
/* Initiator windows */
out_be32 (&xcpci->init_win0, (win0 >> 16) | win0 | 0x003f0000);
out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 ));
out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 ));
out_be32 (&xcpci->init_win_cfg,
PCI_INIT_WIN_CFG_WIN0_CTRL_EN |
PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO |
PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO);
out_be32 (&xcpci->init_ctrl, 0x00000000);
/* Enable bus master and mem access */
out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M);
/* Cache line size and master latency */
out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT));
out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
out_be32 (&xcpci->target_bar0,
PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN);
out_be32 (&xcpci->target_bar1,
PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN);
/* Deassert reset bit */
out_be32 (&xcpci->glb_stat_ctl, 0x00000000);
/* Enable PCI bus master support */
/* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
PCIREQ2, PCIGNT2 */
out_be32((volatile u32 *)&portcfg->pcfg3,
(in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F));
out_be32((volatile u32 *)&portcfg->pcfg3,
(in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180));
hose->first_busno = 0;
hose->last_busno = 0xff;
pci_set_region(hose->regions + 0,
CONFIG_PCI_MEM_BUS,
CONFIG_PCI_MEM_PHYS,
CONFIG_PCI_MEM_SIZE,
PCI_REGION_MEM);
pci_set_region(hose->regions + 1,
CONFIG_PCI_IO_BUS,
CONFIG_PCI_IO_PHYS,
CONFIG_PCI_IO_SIZE,
PCI_REGION_IO);
pci_set_region(hose->regions + 2,
CONFIG_PCI_SYS_MEM_BUS,
CONFIG_PCI_SYS_MEM_PHYS,
CONFIG_PCI_SYS_MEM_SIZE,
PCI_REGION_MEM | PCI_REGION_MEMORY);
hose->region_count = 3;
hose->cfg_addr = &(xcpci->cfg_adr);
hose->cfg_data = CONFIG_PCI_CFG_BUS;
pci_set_ops(hose,
mpc8220_pci_read_config_byte,
mpc8220_pci_read_config_word,
mpc8220_pci_read_config_dword,
mpc8220_pci_write_config_byte,
mpc8220_pci_write_config_word,
mpc8220_pci_write_config_dword);
/* Hose scan */
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
}
#endif /* CONFIG_PCI */

View File

@@ -1,131 +0,0 @@
/*
* (C) Copyright 2004, Freescale, Inc
* TsiChung Liew, Tsi-Chung.Liew@freescale.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* Minimal serial functions needed to use one of the PSC ports
* as serial console interface.
*/
#include <common.h>
#include <mpc8220.h>
int serial_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
#if defined (CONFIG_EXTUART_CONSOLE)
volatile uchar *cpld = (volatile uchar *) CFG_CPLD_BASE;
#endif
/* Check CPLD Switch 2 whether is external or internal */
#if defined (CONFIG_EXTUART_CONSOLE)
if ((*cpld & 0x02) == 0x02) {
gd->bExtUart = 1;
return ext_serial_init ();
} else
#endif
{
#if defined(CONFIG_PSC_CONSOLE)
gd->bExtUart = 0;
return psc_serial_init ();
#endif
}
return (0);
}
void serial_putc (const char c)
{
DECLARE_GLOBAL_DATA_PTR;
if (gd->bExtUart) {
#if defined (CONFIG_EXTUART_CONSOLE)
ext_serial_putc (c);
#endif
} else {
#if defined(CONFIG_PSC_CONSOLE)
psc_serial_putc (c);
#endif
}
}
void serial_puts (const char *s)
{
DECLARE_GLOBAL_DATA_PTR;
if (gd->bExtUart) {
#if defined (CONFIG_EXTUART_CONSOLE)
ext_serial_puts (s);
#endif
} else {
#if defined(CONFIG_PSC_CONSOLE)
psc_serial_puts (s);
#endif
}
}
int serial_getc (void)
{
DECLARE_GLOBAL_DATA_PTR;
if (gd->bExtUart) {
#if defined (CONFIG_EXTUART_CONSOLE)
return ext_serial_getc ();
#endif
} else {
#if defined(CONFIG_PSC_CONSOLE)
return psc_serial_getc ();
#endif
}
}
int serial_tstc (void)
{
DECLARE_GLOBAL_DATA_PTR;
if (gd->bExtUart) {
#if defined (CONFIG_EXTUART_CONSOLE)
return ext_serial_tstc ();
#endif
} else {
#if defined(CONFIG_PSC_CONSOLE)
return psc_serial_tstc ();
#endif
}
}
void serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;
if (gd->bExtUart) {
#if defined (CONFIG_EXTUART_CONSOLE)
ext_serial_setbrg ();
#endif
} else {
#if defined(CONFIG_PSC_CONSOLE)
psc_serial_setbrg ();
#endif
}
}

View File

@@ -33,7 +33,7 @@
#define PSC_BASE MMAP_PSC1
#if defined(CONFIG_PSC_CONSOLE)
int psc_serial_init (void)
int serial_init (void)
{
DECLARE_GLOBAL_DATA_PTR;
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
@@ -68,7 +68,7 @@ int psc_serial_init (void)
return (0);
}
void psc_serial_putc (const char c)
void serial_putc (const char c)
{
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
@@ -81,14 +81,14 @@ void psc_serial_putc (const char c)
psc->xmitbuf[0] = c;
}
void psc_serial_puts (const char *s)
void serial_puts (const char *s)
{
while (*s) {
serial_putc (*s++);
}
}
int psc_serial_getc (void)
int serial_getc (void)
{
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
@@ -97,14 +97,14 @@ int psc_serial_getc (void)
return psc->xmitbuf[2];
}
int psc_serial_tstc (void)
int serial_tstc (void)
{
volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
return (psc->sr_csr & PSC_SR_RXRDY);
}
void psc_serial_setbrg (void)
void serial_setbrg (void)
{
DECLARE_GLOBAL_DATA_PTR;

View File

@@ -220,6 +220,7 @@ void upmconfig (uint upm, uint * table, uint size)
/* ------------------------------------------------------------------------- */
#if !defined(CONFIG_HAVE_OWN_RESET)
int
do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
@@ -253,6 +254,7 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 1;
}
#endif /* CONFIG_HAVE_OWN_RESET */
/* ------------------------------------------------------------------------- */

View File

@@ -157,7 +157,7 @@ static int fec_send(struct eth_device* dev, volatile void *packet, int length)
rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
rtx.txbd[txIdx].cbd_datlen = length;
rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | \
BD_ENET_TX_TC );
BD_ENET_TX_TC | BD_ENET_TX_PAD);
for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
if (i >= TOUT_LOOP) {
@@ -414,7 +414,7 @@ static int fec_init(struct eth_device* dev, bd_t *bis)
immr->im_cpm.im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
}
return 0;
return 1;
}
static void fec_halt(struct eth_device* dev)

View File

@@ -49,6 +49,22 @@ static __inline__ void set_msr(unsigned long msr)
asm volatile("isync");
}
static __inline__ unsigned long get_dec (void)
{
unsigned long val;
asm volatile ("mfdec %0":"=r" (val):);
return val;
}
static __inline__ void set_dec (unsigned long val)
{
if (val)
asm volatile ("mtdec %0"::"r" (val));
}
void enable_interrupts (void)
{
set_msr (get_msr() | MSR_EE);
@@ -62,9 +78,17 @@ int disable_interrupts (void)
return ((msr & MSR_EE) != 0);
}
/* interrupt is not supported yet */
int interrupt_init (void)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
immr->im_pic.gcr = MPC85xx_PICGCR_RST;
while (immr->im_pic.gcr & MPC85xx_PICGCR_RST);
immr->im_pic.gcr = MPC85xx_PICGCR_M;
decrementer_count = get_tbclk() / CFG_HZ;
mtspr(SPRN_TCR, TCR_PIE);
set_dec (decrementer_count);
set_msr (get_msr () | MSR_EE);
return (0);
}
@@ -96,9 +120,9 @@ volatile ulong timestamp = 0;
*/
void timer_interrupt(struct pt_regs *regs)
{
printf ("*** Timer Interrupt *** ");
timestamp++;
set_dec (decrementer_count);
mtspr(SPRN_TSR, TSR_PIS);
#if defined(CONFIG_WATCHDOG)
if ((timestamp % 1000) == 0)
reset_85xx_watchdog();

View File

@@ -115,8 +115,8 @@ _start_e500:
* BookE: isync after MSR,PID; msync_isync after tlbivax & tlbwe
* E500: msync,isync before L1CSR0
* E500: isync after BBEAR,BBTAR,BUCSR,DBCR0,DBCR1,HID0,HID1,
* L1CSR0, L1CSR1, MAS[0,1,2,3,4,6],MMUCSR0, PID[0,1,2],
* SPEFCSR
* L1CSR0, L1CSR1, MAS[0,1,2,3,4,6],MMUCSR0, PID[0,1,2],
* SPEFCSR
*/
/* invalidate d-cache */
@@ -172,21 +172,21 @@ _start_e500:
mtspr TCR,r0
mtspr BUCSR,r0 /* disable branch prediction */
mtspr MAS4,r0
mtspr MAS6,r0
mtspr MAS4,r0
mtspr MAS6,r0
isync
/* Setup interrupt vectors */
lis r1,0xfff8
lis r1,TEXT_BASE@h
mtspr IVPR, r1
li r1,0x0100
li r1,0x0100
mtspr IVOR0,r1 /* 0: Critical input */
li r1,0x0200
li r1,0x0200
mtspr IVOR1,r1 /* 1: Machine check */
li r1,0x0300
li r1,0x0300
mtspr IVOR2,r1 /* 2: Data storage */
li r1,0x0400
li r1,0x0400
mtspr IVOR3,r1 /* 3: Instruction storage */
li r1,0x0500
mtspr IVOR4,r1 /* 4: External interrupt */
@@ -196,16 +196,20 @@ _start_e500:
mtspr IVOR6,r1 /* 6: Program check */
li r1,0x0800
mtspr IVOR7,r1 /* 7: floating point unavailable */
li r1,0x0c00
li r1,0x0900
mtspr IVOR8,r1 /* 8: System call */
/* 9: Auxiliary processor unavailable(unsupported) */
li r1,0x1000
li r1,0x0a00
mtspr IVOR10,r1 /* 10: Decrementer */
li r1,0x1400
li r1,0x0b00
mtspr IVOR11,r1 /* 11: Interval timer */
li r1,0x0c00
mtspr IVOR12,r1 /* 11: Watchdog timer */
li r10,0x0d00
mtspr IVOR13,r1 /* 13: Data TLB error */
li r1,0x1300
li r1,0x0e00
mtspr IVOR14,r1 /* 14: Instruction TLB error */
li r1,0x2000
li r1,0x0f00
mtspr IVOR15,r1 /* 15: Debug */
/*
@@ -214,16 +218,16 @@ _start_e500:
* Note: There is a fixup earlier for Errata CPU4 on
* Rev 1 parts that must precede this MMU invalidation.
*/
li r2, 0x001e
mtspr MMUCSR0, r2
li r2, 0x001e
mtspr MMUCSR0, r2
isync
/*
* Invalidate all TLB0 entries.
*/
li r3,4
li r3,4
li r4,0
tlbivax r4,r3
tlbivax r4,r3
/*
* To avoid REV1 Errata CPU6 issues, make sure
* the instruction following tlbivax is not a store.
@@ -240,7 +244,7 @@ _start_e500:
* (e.g. board/<yourboard>/init.S)
*
*/
bl tlb1_entry
bl tlb1_entry
mr r5,r0
li r1,0x0020 /* max 16 TLB1 plus some TLB0 entries */
mtctr r1
@@ -269,8 +273,8 @@ _start_e500:
lis r4, CFG_CCSRBAR_DEFAULT@h
ori r4, r4, CFG_CCSRBAR_DEFAULT@l
lis r5, CFG_CCSRBAR@h
ori r5, r5, CFG_CCSRBAR@l
lis r5, CFG_CCSRBAR@h
ori r5, r5, CFG_CCSRBAR@l
srwi r6,r5,12
stw r6, 0(r4)
isync
@@ -290,7 +294,7 @@ _start_e500:
lis r7,CFG_CCSRBAR@h
ori r7,r7,CFG_CCSRBAR@l
bl law_entry
bl law_entry
mr r6,r0
li r1,0x0007 /* 8 LAWs, but reserve one for boot-over-rio-or-pci */
mtctr r1
@@ -380,35 +384,35 @@ _start:
/* L1 DCache is used for initial RAM */
mfspr r2, L1CSR0
ori r2, r2, 0x0003
oris r2, r2, 0x0001
mtspr L1CSR0, r2 /* enable/invalidate L1 Dcache */
ori r2, r2, 0x0003
oris r2, r2, 0x0001
mtspr L1CSR0, r2 /* enable/invalidate L1 Dcache */
isync
/* Allocate Initial RAM in data cache.
*/
lis r3, CFG_INIT_RAM_ADDR@h
ori r3, r3, CFG_INIT_RAM_ADDR@l
li r2, 512 /* 512*32=16K */
mtctr r2
lis r3, CFG_INIT_RAM_ADDR@h
ori r3, r3, CFG_INIT_RAM_ADDR@l
li r2, 512 /* 512*32=16K */
mtctr r2
li r0, 0
1:
dcbz r0, r3
dcbtls 0,r0, r3
addi r3, r3, 32
bdnz 1b
dcbtls 0,r0, r3
addi r3, r3, 32
bdnz 1b
#ifndef CFG_RAMBOOT
/* Calculate absolute address in FLASH and jump there */
/* Calculate absolute address in FLASH and jump there */
/*--------------------------------------------------------------*/
lis r3, CFG_MONITOR_BASE@h
ori r3, r3, CFG_MONITOR_BASE@l
addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r3
lis r3, CFG_MONITOR_BASE@h
ori r3, r3, CFG_MONITOR_BASE@l
addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
mtlr r3
blr
in_flash:
#endif /* CFG_RAMBOOT */
#endif /* CFG_RAMBOOT */
/* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
lis r1,CFG_INIT_RAM_ADDR@h
@@ -485,105 +489,84 @@ ProgramCheck:
/* No FPU on MPC85xx. This exception is not supposed to happen.
*/
STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
STD_EXCEPTION(0x0900, Decrementer, timer_interrupt)
STD_EXCEPTION(0x0a00, Trap_0a, UnknownException)
STD_EXCEPTION(0x0b00, Trap_0b, UnknownException)
. = 0x0c00
. = 0x0900
/*
* r0 - SYSCALL number
* r3-... arguments
*/
SystemCall:
addis r11,r0,0 /* get functions table addr */
ori r11,r11,0 /* Note: this code is patched in trap_init */
addis r12,r0,0 /* get number of functions */
ori r12,r12,0
addis r11,r0,0 /* get functions table addr */
ori r11,r11,0 /* Note: this code is patched in trap_init */
addis r12,r0,0 /* get number of functions */
ori r12,r12,0
cmplw 0, r0, r12
bge 1f
cmplw 0, r0, r12
bge 1f
rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
add r11,r11,r0
lwz r11,0(r11)
rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
add r11,r11,r0
lwz r11,0(r11)
li r20,0xd00-4 /* Get stack pointer */
lwz r12,0(r20)
subi r12,r12,12 /* Adjust stack pointer */
li r0,0xc00+_end_back-SystemCall
cmplw 0, r0, r12 /* Check stack overflow */
bgt 1f
stw r12,0(r20)
li r20,0xd00-4 /* Get stack pointer */
lwz r12,0(r20)
subi r12,r12,12 /* Adjust stack pointer */
li r0,0xc00+_end_back-SystemCall
cmplw 0, r0, r12 /* Check stack overflow */
bgt 1f
stw r12,0(r20)
mflr r0
stw r0,0(r12)
mfspr r0,SRR0
stw r0,4(r12)
mfspr r0,SRR1
stw r0,8(r12)
mflr r0
stw r0,0(r12)
mfspr r0,SRR0
stw r0,4(r12)
mfspr r0,SRR1
stw r0,8(r12)
li r12,0xc00+_back-SystemCall
mtlr r12
mtspr SRR0,r11
li r12,0xc00+_back-SystemCall
mtlr r12
mtspr SRR0,r11
1: SYNC
1: SYNC
rfi
_back:
mfmsr r11 /* Disable interrupts */
li r12,0
ori r12,r12,MSR_EE
andc r11,r11,r12
SYNC /* Some chip revs need this... */
mtmsr r11
mfmsr r11 /* Disable interrupts */
li r12,0
ori r12,r12,MSR_EE
andc r11,r11,r12
SYNC /* Some chip revs need this... */
mtmsr r11
SYNC
li r12,0xd00-4 /* restore regs */
lwz r12,0(r12)
li r12,0xd00-4 /* restore regs */
lwz r12,0(r12)
lwz r11,0(r12)
mtlr r11
lwz r11,4(r12)
mtspr SRR0,r11
lwz r11,8(r12)
mtspr SRR1,r11
lwz r11,0(r12)
mtlr r11
lwz r11,4(r12)
mtspr SRR0,r11
lwz r11,8(r12)
mtspr SRR1,r11
addi r12,r12,12 /* Adjust stack pointer */
li r20,0xd00-4
stw r12,0(r20)
addi r12,r12,12 /* Adjust stack pointer */
li r20,0xd00-4
stw r12,0(r20)
SYNC
rfi
_end_back:
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
STD_EXCEPTION(0x0a00, Decrementer, timer_interrupt)
STD_EXCEPTION(0x0b00, IntervalTimer, UnknownException)
STD_EXCEPTION(0x0c00, WatchdogTimer, UnknownException)
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
STD_EXCEPTION(0x0d00, DataTLBError, UnknownException)
STD_EXCEPTION(0x0e00, InstructionTLBError, UnknownException)
STD_EXCEPTION(0x1000, PIT, PITException)
CRIT_EXCEPTION(0x0f00, DebugBreakpoint, DebugException )
STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
STD_EXCEPTION(0x1500, Reserved5, UnknownException)
STD_EXCEPTION(0x1600, Reserved6, UnknownException)
STD_EXCEPTION(0x1700, Reserved7, UnknownException)
STD_EXCEPTION(0x1800, Reserved8, UnknownException)
STD_EXCEPTION(0x1900, Reserved9, UnknownException)
STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
.globl _end_of_vectors
.globl _end_of_vectors
_end_of_vectors:
@@ -1077,72 +1060,69 @@ clear_bss:
* r3: dest_addr
* r7: source address, r8: end address, r9: target address
*/
.globl trap_init
.globl trap_init
trap_init:
lwz r7, GOT(_start)
lwz r8, GOT(_end_of_vectors)
lwz r7, GOT(_start)
lwz r8, GOT(_end_of_vectors)
li r9, 0x100 /* reset vector always at 0x100 */
cmplw 0, r7, r8
bgelr /* return if r7>=r8 - just in case */
cmplw 0, r7, r8
bgelr /* return if r7>=r8 - just in case */
mflr r4 /* save link register */
mflr r4 /* save link register */
1:
lwz r0, 0(r7)
stw r0, 0(r9)
addi r7, r7, 4
addi r9, r9, 4
cmplw 0, r7, r8
bne 1b
lwz r0, 0(r7)
stw r0, 0(r9)
addi r7, r7, 4
addi r9, r9, 4
cmplw 0, r7, r8
bne 1b
/*
* relocate `hdlr' and `int_return' entries
*/
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
li r8, Alignment - _start + EXC_OFF_SYS_RESET
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_DataStorage - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_InstStorage - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_ExtInterrupt - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_Decrementer - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_IntervalTimer - _start + EXC_OFF_SYS_RESET
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
2:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 2b
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 2b
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
bl trap_reloc
lis r7,0x0
mtspr IVPR, r7
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
bl trap_reloc
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
li r8, SystemCall - _start + EXC_OFF_SYS_RESET
3:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 3b
li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
4:
bl trap_reloc
addi r7, r7, 0x100 /* next exception vector */
cmplw 0, r7, r8
blt 4b
mtlr r4 /* restore link register */
mtlr r4 /* restore link register */
blr
/*
* Function: relocate entries for one exception vector
*/
trap_reloc:
lwz r0, 0(r7) /* hdlr ... */
add r0, r0, r3 /* ... += dest_addr */
stw r0, 0(r7)
lwz r0, 0(r7) /* hdlr ... */
add r0, r0, r3 /* ... += dest_addr */
stw r0, 0(r7)
lwz r0, 4(r7) /* int_return ... */
add r0, r0, r3 /* ... += dest_addr */
stw r0, 4(r7)
lwz r0, 4(r7) /* int_return ... */
add r0, r0, r3 /* ... += dest_addr */
stw r0, 4(r7)
blr
@@ -1158,7 +1138,7 @@ unlock_ram_in_cache:
dcbi r0, r3
addi r3, r3, 32
bdnz 1b
sync /* Wait for all icbi to complete on bus */
sync /* Wait for all icbi to complete on bus */
isync
blr
#endif

View File

@@ -463,6 +463,8 @@ void upmconfig (uint upm, uint * table, uint size)
/* ------------------------------------------------------------------------- */
#ifndef CONFIG_LWMON
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong msr, addr;
@@ -497,6 +499,32 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 1;
}
#else /* CONFIG_LWMON */
/*
* On the LWMON board, the MCLR reset input of the PIC's on the board
* uses a 47K/1n RC combination which has a 47us time constant. The
* low signal on the HRESET pin of the CPU is only 512 clocks = 8 us
* and thus too short to reset the external hardware. So we use the
* watchdog to reset the board.
*/
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
/* prevent triggering the watchdog */
disable_interrupts ();
/* make sure the watchdog is running */
reset_8xx_watchdog ((immap_t *) CFG_IMMR);
/* wait for watchdog reset */
while (1) {};
/* NOTREACHED */
return 1;
}
#endif /* CONFIG_LWMON */
/* ------------------------------------------------------------------------- */
/*
@@ -558,6 +586,9 @@ void watchdog_reset (void)
if (re_enable)
enable_interrupts ();
}
#endif /* CONFIG_WATCHDOG */
#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
void reset_8xx_watchdog (volatile immap_t * immr)
{

View File

@@ -46,12 +46,13 @@
/************************************************************************/
/* ** CONFIG STUFF -- should be moved to board config file */
/************************************************************************/
#define CONFIG_LCD_LOGO
#define LCD_INFO /* Display Logo, (C) and system info */
#ifndef CONFIG_LCD_INFO
#define CONFIG_LCD_INFO /* Display Logo, (C) and system info */
#endif
#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10)
#undef CONFIG_LCD_LOGO
#undef LCD_INFO
#undef CONFIG_LCD_INFO
#endif
/*----------------------------------------------------------------------*/
@@ -155,7 +156,7 @@ vidinfo_t panel_info = {
3, 0, 0, 1, 1, 15, 4, 0, 3
/* wbl, vpw, lcdac, wbf */
};
#define LCD_INFO_BELOW_LOGO
#define CONFIG_LCD_INFO_BELOW_LOGO
#endif /* CONFIG_SHARP_LQ057Q3DC02 */
/*----------------------------------------------------------------------*/
@@ -179,7 +180,7 @@ vidinfo_t panel_info = {
3, 0, 0, 1, 1, 248, 4, 0, 35
/* wbl, vpw, lcdac, wbf */
};
#define LCD_INFO_BELOW_LOGO
#define CONFIG_LCD_INFO_BELOW_LOGO
#endif /* CONFIG_SHARP_LQ065T9DR51U */
#ifdef CONFIG_SHARP_LQ084V1DG21

View File

@@ -98,6 +98,7 @@ void pci_405gp_init(struct pci_controller *hose)
#if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405)
unsigned long ptmla[2] = {bd->bi_memstart, bd->bi_flashstart};
unsigned long ptmms[2] = {~(bd->bi_memsize - 1) | 1, ~(bd->bi_flashsize - 1) | 1};
char *ptmla_str, *ptmms_str;
#else
unsigned long ptmla[2] = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA};
unsigned long ptmms[2] = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS};
@@ -119,6 +120,22 @@ void pci_405gp_init(struct pci_controller *hose)
#endif
#endif
#if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405)
ptmla_str = getenv("ptm1la");
ptmms_str = getenv("ptm1ms");
if(NULL != ptmla_str && NULL != ptmms_str ) {
ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
}
ptmla_str = getenv("ptm2la");
ptmms_str = getenv("ptm2ms");
if(NULL != ptmla_str && NULL != ptmms_str ) {
ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
}
#endif
/*
* Register the hose
*/

View File

@@ -1216,6 +1216,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
"Cannot allocate eth_device %d\n", eth_num);
return (-1);
}
memset(dev, 0, sizeof(*dev));
/* Allocate our private use data */
hw = (EMAC_440GX_HW_PST) malloc (sizeof (*hw));
@@ -1226,6 +1227,7 @@ int ppc_440x_eth_initialize (bd_t * bis)
free (dev);
return (-1);
}
memset(hw, 0, sizeof(*hw));
switch (eth_num) {
default: /* fall through */

View File

@@ -77,14 +77,14 @@ U-Boot 1.1.3 (Apr 5 2005 - 22:59:57)
IBM PowerPC 440 GX Rev. C
Board: IBM 440GX Evaluation Board
VCO: 1066 MHz
CPU: 533 MHz
PLB: 152 MHz
OPB: 76 MHz
EPB: 76 MHz
VCO: 1066 MHz
CPU: 533 MHz
PLB: 152 MHz
OPB: 76 MHz
EPB: 76 MHz
I2C: ready
DRAM: 256 MB
FLASH: 5 MB
FLASH: 5 MB
PCI: Bus Dev VenId DevId Class Int
In: serial
Out: serial

View File

@@ -47,7 +47,8 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
status_led.o sym53c8xx.o \
ti_pci1410a.o tigon3.o \
usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
videomodes.o w83c553f.o
videomodes.o w83c553f.o \
ks8695eth.o
all: $(LIB)

View File

@@ -189,6 +189,7 @@ static ulong flash_get_size (ulong base, int banknum);
static int flash_write_cfiword (flash_info_t * info, ulong dest, cfiword_t cword);
static int flash_full_status_check (flash_info_t * info, flash_sect_t sector,
ulong tout, char *prompt);
static flash_info_t *flash_get_info(ulong base);
#ifdef CFG_FLASH_USE_BUFFER_WRITE
static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, int len);
#endif
@@ -341,8 +342,8 @@ unsigned long flash_init (void)
#if (CFG_MONITOR_BASE >= CFG_FLASH_BASE)
flash_protect (FLAG_PROTECT_SET,
CFG_MONITOR_BASE,
CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
&flash_info[0]);
CFG_MONITOR_BASE + monitor_flash_len - 1,
flash_get_info(CFG_MONITOR_BASE));
#endif
/* Environment protection ON by default */
@@ -350,7 +351,7 @@ unsigned long flash_init (void)
flash_protect (FLAG_PROTECT_SET,
CFG_ENV_ADDR,
CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
&flash_info[0]);
flash_get_info(CFG_ENV_ADDR));
#endif
/* Redundant environment protection ON by default */
@@ -358,11 +359,28 @@ unsigned long flash_init (void)
flash_protect (FLAG_PROTECT_SET,
CFG_ENV_ADDR_REDUND,
CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
&flash_info[0]);
flash_get_info(CFG_ENV_ADDR_REDUND));
#endif
return (size);
}
/*-----------------------------------------------------------------------
*/
static flash_info_t *flash_get_info(ulong base)
{
int i;
flash_info_t * info;
for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
info = & flash_info[i];
if (info->size && info->start[0] <= base &&
base <= info->start[0] + info->size - 1)
break;
}
return i == CFG_MAX_FLASH_BANKS ? 0 : info;
}
/*-----------------------------------------------------------------------
*/
int flash_erase (flash_info_t * info, int s_first, int s_last)

238
drivers/ks8695eth.c Normal file
View File

@@ -0,0 +1,238 @@
/*
* ks8695eth.c -- KS8695 ethernet driver
*
* (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifdef CONFIG_DRIVER_KS8695ETH
/****************************************************************************/
#include <common.h>
#include <malloc.h>
#include <net.h>
#include <asm/io.h>
#include <asm/arch/platform.h>
/****************************************************************************/
/*
* Hardware register access to the KS8695 LAN ethernet port
* (well, it is the 4 port switch really).
*/
#define ks8695_read(a) *((volatile unsigned long *) (KS8695_IO_BASE + (a)))
#define ks8695_write(a,v) *((volatile unsigned long *) (KS8695_IO_BASE + (a))) = (v)
/****************************************************************************/
/*
* Define the descriptor in-memory data structures.
*/
struct ks8695_txdesc {
uint32_t owner;
uint32_t ctrl;
uint32_t addr;
uint32_t next;
};
struct ks8695_rxdesc {
uint32_t status;
uint32_t ctrl;
uint32_t addr;
uint32_t next;
};
/****************************************************************************/
/*
* Allocate local data structures to use for receiving and sending
* packets. Just to keep it all nice and simple.
*/
#define TXDESCS 4
#define RXDESCS 4
#define BUFSIZE 2048
volatile struct ks8695_txdesc ks8695_tx[TXDESCS] __attribute__((aligned(256)));
volatile struct ks8695_rxdesc ks8695_rx[RXDESCS] __attribute__((aligned(256)));
volatile uint8_t ks8695_bufs[BUFSIZE*(TXDESCS+RXDESCS)] __attribute__((aligned(2048)));;
/****************************************************************************/
/*
* Ideally we want to use the MAC address stored in flash.
* But we do some sanity checks in case they are not present
* first.
*/
unsigned char eth_mac[] = {
0x00, 0x13, 0xc6, 0x00, 0x00, 0x00
};
void ks8695_getmac(void)
{
unsigned char *fp;
int i;
/* Check if flash MAC is valid */
fp = (unsigned char *) 0x0201c000;
for (i = 0; (i < 6); i++) {
if ((fp[i] != 0) && (fp[i] != 0xff))
break;
}
/* If we found a valid looking MAC address then use it */
if (i < 6)
memcpy(&eth_mac[0], fp, 6);
}
/****************************************************************************/
void eth_reset(bd_t *bd)
{
int i;
debug ("%s(%d): eth_reset()\n", __FILE__, __LINE__);
/* Reset the ethernet engines first */
ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
ks8695_getmac();
/* Set MAC address */
ks8695_write(KS8695_LAN_MAC_LOW, (eth_mac[5] | (eth_mac[4] << 8) |
(eth_mac[3] << 16) | (eth_mac[2] << 24)));
ks8695_write(KS8695_LAN_MAC_HIGH, (eth_mac[1] | (eth_mac[0] << 8)));
/* Turn the 4 port switch on */
i = ks8695_read(KS8695_SWITCH_CTRL0);
ks8695_write(KS8695_SWITCH_CTRL0, (i | 0x1));
/* ks8695_write(KS8695_WAN_CONTROL, 0x3f000066); */
/* Initialize descriptor rings */
for (i = 0; (i < TXDESCS); i++) {
ks8695_tx[i].owner = 0;
ks8695_tx[i].ctrl = 0;
ks8695_tx[i].addr = (uint32_t) &ks8695_bufs[i*BUFSIZE];
ks8695_tx[i].next = (uint32_t) &ks8695_tx[i+1];
}
ks8695_tx[TXDESCS-1].ctrl = 0x02000000;
ks8695_tx[TXDESCS-1].next = (uint32_t) &ks8695_tx[0];
for (i = 0; (i < RXDESCS); i++) {
ks8695_rx[i].status = 0x80000000;
ks8695_rx[i].ctrl = BUFSIZE - 4;
ks8695_rx[i].addr = (uint32_t) &ks8695_bufs[(i+TXDESCS)*BUFSIZE];
ks8695_rx[i].next = (uint32_t) &ks8695_rx[i+1];
}
ks8695_rx[RXDESCS-1].ctrl |= 0x00080000;
ks8695_rx[RXDESCS-1].next = (uint32_t) &ks8695_rx[0];
/* The KS8695 is pretty slow reseting the ethernets... */
udelay(2000000);
/* Enable the ethernet engine */
ks8695_write(KS8695_LAN_TX_LIST, (uint32_t) &ks8695_tx[0]);
ks8695_write(KS8695_LAN_RX_LIST, (uint32_t) &ks8695_rx[0]);
ks8695_write(KS8695_LAN_DMA_TX, 0x3);
ks8695_write(KS8695_LAN_DMA_RX, 0x71);
ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
printf("KS8695 ETHERNET: ");
for (i = 0; (i < 5); i++) {
bd->bi_enetaddr[i] = eth_mac[i];
printf("%02x:", eth_mac[i]);
}
bd->bi_enetaddr[i] = eth_mac[i];
printf("%02x\n", eth_mac[i]);
}
/****************************************************************************/
int eth_init(bd_t *bd)
{
debug ("%s(%d): eth_init()\n", __FILE__, __LINE__);
eth_reset(bd);
return 0;
}
/****************************************************************************/
void eth_halt(void)
{
debug ("%s(%d): eth_halt()\n", __FILE__, __LINE__);
/* Reset the ethernet engines */
ks8695_write(KS8695_LAN_DMA_TX, 0x80000000);
ks8695_write(KS8695_LAN_DMA_RX, 0x80000000);
}
/****************************************************************************/
int eth_rx(void)
{
volatile struct ks8695_rxdesc *dp;
int i, len = 0;
debug ("%s(%d): eth_rx()\n", __FILE__, __LINE__);
for (i = 0; (i < RXDESCS); i++) {
dp= &ks8695_rx[i];
if ((dp->status & 0x80000000) == 0) {
len = (dp->status & 0x7ff) - 4;
NetReceive((void *) dp->addr, len);
dp->status = 0x80000000;
ks8695_write(KS8695_LAN_DMA_RX_START, 0x1);
break;
}
}
return len;
}
/****************************************************************************/
int eth_send(volatile void *packet, int len)
{
volatile struct ks8695_txdesc *dp;
static int next = 0;
debug ("%s(%d): eth_send(packet=%x,len=%d)\n", __FILE__, __LINE__,
packet, len);
dp = &ks8695_tx[next];
memcpy((void *) dp->addr, packet, len);
if (len < 64) {
memset(dp->addr+len, 0, 64-len);
len = 64;
}
dp->ctrl = len | 0xe0000000;
dp->owner = 0x80000000;
ks8695_write(KS8695_LAN_DMA_TX, 0x3);
ks8695_write(KS8695_LAN_DMA_TX_START, 0x1);
if (++next >= TXDESCS)
next = 0;
return len;
}
#endif /* CONFIG_DRIVER_KS8695ETH */

View File

@@ -153,11 +153,12 @@ int nc_start (void)
nc_port = 6666; /* default port */
if (getenv ("ncip")) {
char *p;
nc_ip = getenv_IPaddr ("ncip");
if (!nc_ip)
return -1; /* ncip is 0.0.0.0 */
char *p = strchr (getenv ("ncip"), ':');
if (p)
if ((p = strchr (getenv ("ncip"), ':')) != NULL)
nc_port = simple_strtoul (p + 1, NULL, 10);
} else
nc_ip = ~0; /* ncip is not set */
@@ -188,13 +189,13 @@ void nc_putc (char c)
void nc_puts (const char *s)
{
int len;
if (output_recursion)
return;
output_recursion = 1;
int len = strlen (s);
if (len > 512)
if ((len = strlen (s)) > 512)
len = 512;
nc_send_packet (s, len);
@@ -204,6 +205,8 @@ void nc_puts (const char *s)
int nc_getc (void)
{
uchar c;
input_recursion = 1;
net_timeout = 0; /* no timeout */
@@ -212,8 +215,8 @@ int nc_getc (void)
input_recursion = 0;
uchar c = input_buffer[input_offset];
input_offset++;
c = input_buffer[input_offset++];
if (input_offset >= sizeof input_buffer)
input_offset -= sizeof input_buffer;
input_size--;

View File

@@ -58,6 +58,11 @@ include $(TOPDIR)/config.mk
SREC = hello_world.srec
BIN = hello_world.bin hello_world
ifeq ($(CPU),mpc8xx)
SREC = test_burst.srec
BIN = test_burst.bin test_burst
endif
ifeq ($(ARCH),i386)
SREC += 82559_eeprom.srec
BIN += 82559_eeprom.bin 82559_eeprom
@@ -97,6 +102,9 @@ LIBAOBJS=
ifeq ($(ARCH),ppc)
LIBAOBJS+= $(ARCH)_longjmp.o $(ARCH)_setjmp.o
endif
ifeq ($(CPU),mpc8xx)
LIBAOBJS+= test_burst_lib.o
endif
LIBCOBJS= stubs.o
LIBOBJS = $(LIBAOBJS) $(LIBCOBJS)

319
examples/test_burst.c Normal file
View File

@@ -0,0 +1,319 @@
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* The test exercises SDRAM accesses in burst mode
*/
#include <common.h>
#include <exports.h>
#include <commproc.h>
#include <asm/mmu.h>
#include <asm/processor.h>
#include <serial.h>
#include <watchdog.h>
#include "test_burst.h"
/* 8 MB test region of physical RAM */
#define TEST_PADDR 0x00800000
/* The uncached virtual region */
#define TEST_VADDR_NC 0x00800000
/* The cached virtual region */
#define TEST_VADDR_C 0x01000000
/* When an error is detected, the address where the error has been found,
and also the current and the expected data will be written to
the following flash address
*/
#define TEST_FLASH_ADDR 0x40100000
/* Define GPIO ports to signal start of burst transfers and errors */
#ifdef CONFIG_LWMON
/* Use PD.8 to signal start of burst transfers */
#define GPIO1_DAT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
#define GPIO1_BIT 0x0080
/* Configure PD.8 as general purpose output */
#define GPIO1_INIT \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pdpar &= ~GPIO1_BIT; \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddir |= GPIO1_BIT;
/* Use PD.9 to signal error */
#define GPIO2_DAT (((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddat)
#define GPIO2_BIT 0x0040
/* Configure PD.9 as general purpose output */
#define GPIO2_INIT \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pdpar &= ~GPIO2_BIT; \
((volatile immap_t *)CFG_IMMR)->im_ioport.iop_pddir |= GPIO2_BIT;
#endif /* CONFIG_LWMON */
static void test_prepare (void);
static int test_burst_start (unsigned long size, unsigned long pattern);
static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached);
static int test_mmu_is_on(void);
static void test_desc(unsigned long size);
static void test_error(char * step, volatile void * addr, unsigned long val, unsigned long pattern);
static void signal_init(void);
static void signal_start(void);
static void signal_error(void);
static void test_usage(void);
static unsigned long test_pattern [] = {
0x00000000,
0xffffffff,
0x55555555,
0xaaaaaaaa,
};
int test_burst (int argc, char *argv[])
{
unsigned long size = CACHE_LINE_SIZE;
unsigned int pass = 0;
int res = 0;
int i, j;
if (argc == 3) {
char * d;
for (size = 0, d = argv[1]; *d >= '0' && *d <= '9'; d++) {
size *= 10;
size += *d - '0';
}
if (size == 0 || *d) {
test_usage();
return 1;
}
for (d = argv[2]; *d >= '0' && *d <= '9'; d++) {
pass *= 10;
pass += *d - '0';
}
if (*d) {
test_usage();
return 1;
}
} else if (argc > 3) {
test_usage();
return 1;
}
size += (CACHE_LINE_SIZE - 1);
size &= ~(CACHE_LINE_SIZE - 1);
if (!test_mmu_is_on()) {
test_prepare();
}
test_desc(size);
for (j = 0; !pass || j < pass; j++) {
for (i = 0; i < sizeof(test_pattern) / sizeof(test_pattern[0]);
i++) {
res = test_burst_start(size, test_pattern[i]);
if (res != 0) {
goto Done;
}
}
printf ("Iteration #%d passed\n", j + 1);
if (tstc() && 0x03 == getc())
break;
}
Done:
return res;
}
static void test_prepare (void)
{
printf ("\n");
caches_init();
disable_interrupts();
mmu_init();
printf ("Interrupts are disabled\n");
printf ("I-Cache is ON\n");
printf ("D-Cache is ON\n");
printf ("MMU is ON\n");
printf ("\n");
test_map_8M (TEST_PADDR, TEST_VADDR_NC, 0);
test_map_8M (TEST_PADDR, TEST_VADDR_C, 1);
test_map_8M (TEST_FLASH_ADDR & 0xFF800000, TEST_FLASH_ADDR & 0xFF800000, 0);
/* Configure GPIO ports */
signal_init();
}
static int test_burst_start (unsigned long size, unsigned long pattern)
{
volatile unsigned long * vaddr_c = (unsigned long *)TEST_VADDR_C;
volatile unsigned long * vaddr_nc = (unsigned long *)TEST_VADDR_NC;
int i, n;
int res = 1;
printf ("Test pattern %08x ...", pattern);
n = size / 4;
for (i = 0; i < n; i ++) {
vaddr_c [i] = pattern;
}
signal_start();
flush_dcache_range((unsigned long)vaddr_c, (unsigned long)(vaddr_c + n) - 1);
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_nc [i];
if (tmp != pattern) {
test_error("2a", vaddr_nc + i, tmp, pattern);
goto Done;
}
}
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_c [i];
if (tmp != pattern) {
test_error("2b", vaddr_c + i, tmp, pattern);
goto Done;
}
}
for (i = 0; i < n; i ++) {
vaddr_nc [i] = pattern;
}
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_nc [i];
if (tmp != pattern) {
test_error("3a", vaddr_nc + i, tmp, pattern);
goto Done;
}
}
signal_start();
for (i = 0; i < n; i ++) {
register unsigned long tmp = vaddr_c [i];
if (tmp != pattern) {
test_error("3b", vaddr_c + i, tmp, pattern);
goto Done;
}
}
res = 0;
Done:
printf(" %s\n", res == 0 ? "OK" : "");
return res;
}
static void test_map_8M (unsigned long paddr, unsigned long vaddr, int cached)
{
mtspr (MD_EPN, (vaddr & 0xFFFFFC00) | MI_EVALID);
mtspr (MD_TWC, MI_PS8MEG | MI_SVALID);
mtspr (MD_RPN, (paddr & 0xFFFFF000) | MI_BOOTINIT | (cached ? 0 : 2));
mtspr (MD_AP, MI_Kp);
}
static int test_mmu_is_on(void)
{
unsigned long msr;
asm volatile("mfmsr %0" : "=r" (msr) :);
return msr & MSR_DR;
}
static void test_desc(unsigned long size)
{
printf(
"The following tests will be conducted:\n"
"1) Map %d-byte region of physical RAM at 0x%08x\n"
" into two virtual regions:\n"
" one cached at 0x%08x and\n"
" the the other uncached at 0x%08x.\n",
size, TEST_PADDR, TEST_VADDR_NC, TEST_VADDR_C);
puts(
"2) Fill the cached region with a pattern, and flush the cache\n"
"2a) Check the uncached region to match the pattern\n"
"2b) Check the cached region to match the pattern\n"
"3) Fill the uncached region with a pattern\n"
"3a) Check the cached region to match the pattern\n"
"3b) Check the uncached region to match the pattern\n"
"2b) Change the patterns and go to step 2\n"
"\n"
);
}
static void test_error(
char * step, volatile void * addr, unsigned long val, unsigned long pattern)
{
volatile unsigned long * p = (void *)TEST_FLASH_ADDR;
signal_error();
p[0] = (unsigned long)addr;
p[1] = val;
p[2] = pattern;
printf ("\nError at step %s, addr %08x: read %08x, pattern %08x",
step, addr, val, pattern);
}
static void signal_init(void)
{
#if defined(GPIO1_INIT)
GPIO1_INIT;
#endif
#if defined(GPIO2_INIT)
GPIO2_INIT;
#endif
}
static void signal_start(void)
{
#if defined(GPIO1_INIT)
if (GPIO1_DAT & GPIO1_BIT) {
GPIO1_DAT &= ~GPIO1_BIT;
} else {
GPIO1_DAT |= GPIO1_BIT;
}
#endif
}
static void signal_error(void)
{
#if defined(GPIO2_INIT)
if (GPIO2_DAT & GPIO2_BIT) {
GPIO2_DAT &= ~GPIO2_BIT;
} else {
GPIO2_DAT |= GPIO2_BIT;
}
#endif
}
static void test_usage(void)
{
printf("Usage: go 0x40004 [size] [count]\n");
}

38
examples/test_burst.h Normal file
View File

@@ -0,0 +1,38 @@
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _TEST_BURST_H
#define _TEST_BURST_H
/* Cache line size */
#define CACHE_LINE_SIZE 16
/* Binary logarithm of the cache line size */
#define LG_CACHE_LINE_SIZE 4
#ifndef __ASSEMBLY__
extern void mmu_init(void);
extern void caches_init(void);
extern void flush_dcache_range(unsigned long start, unsigned long stop);
#endif
#endif /* _TEST_BURST_H */

170
examples/test_burst_lib.S Normal file
View File

@@ -0,0 +1,170 @@
/*
* (C) Copyright 2005
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <ppc_asm.tmpl>
#include <ppc_defs.h>
#include <asm/cache.h>
#include <asm/mmu.h>
#include "test_burst.h"
.text
/*
* void mmu_init(void);
*
* This function turns the MMU on
*
* Three 8 MByte regions are mapped 1:1, uncached
* - SDRAM lower 8 MByte
* - SDRAM higher 8 MByte
* - IMMR
*/
.global mmu_init
mmu_init:
tlbia /* Invalidate all TLB entries */
li r8, 0
mtspr MI_CTR, r8 /* Set instruction control to zero */
lis r8, MD_RESETVAL@h
mtspr MD_CTR, r8 /* Set data TLB control */
/* Now map the lower 8 Meg into the TLBs. For this quick hack,
* we can load the instruction and data TLB registers with the
* same values.
*/
li r8, MI_EVALID /* Create EPN for address 0 */
mtspr MI_EPN, r8
mtspr MD_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr MI_TWC, r8
mtspr MD_TWC, r8
li r8, MI_BOOTINIT|0x2 /* Create RPN for address 0 */
mtspr MI_RPN, r8 /* Store TLB entry */
mtspr MD_RPN, r8
lis r8, MI_Kp@h /* Set the protection mode */
mtspr MI_AP, r8
mtspr MD_AP, r8
/* Now map the higher 8 Meg into the TLBs. For this quick hack,
* we can load the instruction and data TLB registers with the
* same values.
*/
lwz r9,20(r29) /* gd->ram_size */
addis r9,r9,-0x80
mr r8, r9 /* Higher 8 Meg in SDRAM */
ori r8, r8, MI_EVALID /* Mark page valid */
mtspr MI_EPN, r8
mtspr MD_EPN, r8
li r8, MI_PS8MEG /* Set 8M byte page */
ori r8, r8, MI_SVALID /* Make it valid */
mtspr MI_TWC, r8
mtspr MD_TWC, r8
mr r8, r9
ori r8, r8, MI_BOOTINIT|0x2
mtspr MI_RPN, r8 /* Store TLB entry */
mtspr MD_RPN, r8
lis r8, MI_Kp@h /* Set the protection mode */
mtspr MI_AP, r8
mtspr MD_AP, r8
/* Map another 8 MByte at the IMMR to get the processor
* internal registers (among other things).
*/
mfspr r9, 638 /* Get current IMMR */
andis. r9, r9, 0xff80 /* Get 8Mbyte boundary */
mr r8, r9 /* Create vaddr for TLB */
ori r8, r8, MD_EVALID /* Mark it valid */
mtspr MD_EPN, r8
li r8, MD_PS8MEG /* Set 8M byte page */
ori r8, r8, MD_SVALID /* Make it valid */
mtspr MD_TWC, r8
mr r8, r9 /* Create paddr for TLB */
ori r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
mtspr MD_RPN, r8
/* We now have the lower and higher 8 Meg mapped into TLB entries,
* and the caches ready to work.
*/
mfmsr r0
ori r0,r0,MSR_DR|MSR_IR
mtspr SRR1,r0
mflr r0
mtspr SRR0,r0
SYNC
rfi /* enables MMU */
/*
* void caches_init(void);
*/
.globl caches_init
caches_init:
sync
mfspr r3, IC_CST /* Clear error bits */
mfspr r3, DC_CST
lis r3, IDC_UNALL@h /* Unlock all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_INVALL@h /* Invalidate all */
mtspr IC_CST, r3
mtspr DC_CST, r3
lis r3, IDC_ENABLE@h /* Enable all */
mtspr IC_CST, r3
mtspr DC_CST, r3
blr
/*
* void flush_dcache_range(unsigned long start, unsigned long stop);
*/
.global flush_dcache_range
flush_dcache_range:
li r5,CACHE_LINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
add r4,r4,r5
srwi. r4,r4,LG_CACHE_LINE_SIZE
beqlr
mtctr r4
1: dcbf 0,r3
addi r3,r3,CACHE_LINE_SIZE
bdnz 1b
sync /* wait for dcbf's to get to ram */
blr
/*
* void disable_interrupts(void);
*/
.global disable_interrupts
disable_interrupts:
mfmsr r0
rlwinm r0,r0,0,17,15
mtmsr r0
blr

View File

@@ -27,6 +27,7 @@ LIB = libjffs2.a
AOBJS =
COBJS = jffs2_1pass.o compr_rtime.o compr_rubin.o compr_zlib.o mini_inflate.o
COBJS += compr_lzo.o compr_lzari.o
OBJS = $(AOBJS) $(COBJS)
#CPPFLAGS +=

262
fs/jffs2/compr_lzari.c Normal file
View File

@@ -0,0 +1,262 @@
/*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright (C) 2004 Patrik Kluba,
* University of Szeged, Hungary
*
* For licensing information, see the file 'LICENCE' in the
* jffs2 directory.
*
* $Id: compr_lzari.c,v 1.3 2004/06/23 16:34:39 havasi Exp $
*
*/
/*
Lempel-Ziv-Arithmetic coding compression module for jffs2
Based on the LZARI source included in LDS (lossless datacompression sources)
*/
/* -*- Mode: C; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*- */
/*
Original copyright follows:
**************************************************************
LZARI.C -- A Data Compression Program
(tab = 4 spaces)
**************************************************************
4/7/1989 Haruhiko Okumura
Use, distribute, and modify this program freely.
Please send me your improved versions.
PC-VAN SCIENCE
NIFTY-Serve PAF01022
CompuServe 74050,1022
**************************************************************
LZARI.C (c)1989 by Haruyasu Yoshizaki, Haruhiko Okumura, and Kenji Rikitake.
All rights reserved. Permission granted for non-commercial use.
*/
/*
2004-02-18 pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
Removed unused variables and fixed no return value
2004-02-16 pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
Initial release
*/
#include <config.h>
#if ((CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_LZO_LZARI))
#include <linux/stddef.h>
#include <jffs2/jffs2.h>
#define N 4096 /* size of ring buffer */
#define F 60 /* upper limit for match_length */
#define THRESHOLD 2 /* encode string into position and length
if match_length is greater than this */
#define NIL N /* index for root of binary search trees */
static unsigned char
text_buf[N + F - 1]; /* ring buffer of size N,
with extra F-1 bytes to facilitate string comparison */
/********** Arithmetic Compression **********/
/* If you are not familiar with arithmetic compression, you should read
I. E. Witten, R. M. Neal, and J. G. Cleary,
Communications of the ACM, Vol. 30, pp. 520-540 (1987),
from which much have been borrowed. */
#define M 15
/* Q1 (= 2 to the M) must be sufficiently large, but not so
large as the unsigned long 4 * Q1 * (Q1 - 1) overflows. */
#define Q1 (1UL << M)
#define Q2 (2 * Q1)
#define Q3 (3 * Q1)
#define Q4 (4 * Q1)
#define MAX_CUM (Q1 - 1)
#define N_CHAR (256 - THRESHOLD + F)
/* character code = 0, 1, ..., N_CHAR - 1 */
static unsigned long char_to_sym[N_CHAR], sym_to_char[N_CHAR + 1];
static unsigned long
sym_freq[N_CHAR + 1], /* frequency for symbols */
sym_cum[N_CHAR + 1], /* cumulative freq for symbols */
position_cum[N + 1]; /* cumulative freq for positions */
static void StartModel(void) /* Initialize model */
{
unsigned long ch, sym, i;
sym_cum[N_CHAR] = 0;
for (sym = N_CHAR; sym >= 1; sym--) {
ch = sym - 1;
char_to_sym[ch] = sym; sym_to_char[sym] = ch;
sym_freq[sym] = 1;
sym_cum[sym - 1] = sym_cum[sym] + sym_freq[sym];
}
sym_freq[0] = 0; /* sentinel (!= sym_freq[1]) */
position_cum[N] = 0;
for (i = N; i >= 1; i--)
position_cum[i - 1] = position_cum[i] + 10000 / (i + 200);
/* empirical distribution function (quite tentative) */
/* Please devise a better mechanism! */
}
static void UpdateModel(unsigned long sym)
{
unsigned long c, ch_i, ch_sym;
unsigned long i;
if (sym_cum[0] >= MAX_CUM) {
c = 0;
for (i = N_CHAR; i > 0; i--) {
sym_cum[i] = c;
c += (sym_freq[i] = (sym_freq[i] + 1) >> 1);
}
sym_cum[0] = c;
}
for (i = sym; sym_freq[i] == sym_freq[i - 1]; i--) ;
if (i < sym) {
ch_i = sym_to_char[i]; ch_sym = sym_to_char[sym];
sym_to_char[i] = ch_sym; sym_to_char[sym] = ch_i;
char_to_sym[ch_i] = sym; char_to_sym[ch_sym] = i;
}
sym_freq[i]++;
while (--i > 0) sym_cum[i]++;
sym_cum[0]++;
}
static unsigned long BinarySearchSym(unsigned long x)
/* 1 if x >= sym_cum[1],
N_CHAR if sym_cum[N_CHAR] > x,
i such that sym_cum[i - 1] > x >= sym_cum[i] otherwise */
{
unsigned long i, j, k;
i = 1; j = N_CHAR;
while (i < j) {
k = (i + j) / 2;
if (sym_cum[k] > x) i = k + 1; else j = k;
}
return i;
}
unsigned long BinarySearchPos(unsigned long x)
/* 0 if x >= position_cum[1],
N - 1 if position_cum[N] > x,
i such that position_cum[i] > x >= position_cum[i + 1] otherwise */
{
unsigned long i, j, k;
i = 1; j = N;
while (i < j) {
k = (i + j) / 2;
if (position_cum[k] > x) i = k + 1; else j = k;
}
return i - 1;
}
static int Decode(unsigned char *srcbuf, unsigned char *dstbuf, unsigned long srclen,
unsigned long dstlen) /* Just the reverse of Encode(). */
{
unsigned long i, r, j, k, c, range, sym;
unsigned char *ip, *op;
unsigned char *srcend = srcbuf + srclen;
unsigned char *dstend = dstbuf + dstlen;
unsigned char buffer = 0;
unsigned char mask = 0;
unsigned long low = 0;
unsigned long high = Q4;
unsigned long value = 0;
ip = srcbuf;
op = dstbuf;
for (i = 0; i < M + 2; i++) {
value *= 2;
if ((mask >>= 1) == 0) {
buffer = (ip >= srcend) ? 0 : *(ip++);
mask = 128;
}
value += ((buffer & mask) != 0);
}
StartModel();
for (i = 0; i < N - F; i++) text_buf[i] = ' ';
r = N - F;
while (op < dstend) {
range = high - low;
sym = BinarySearchSym((unsigned long)
(((value - low + 1) * sym_cum[0] - 1) / range));
high = low + (range * sym_cum[sym - 1]) / sym_cum[0];
low += (range * sym_cum[sym ]) / sym_cum[0];
for ( ; ; ) {
if (low >= Q2) {
value -= Q2; low -= Q2; high -= Q2;
} else if (low >= Q1 && high <= Q3) {
value -= Q1; low -= Q1; high -= Q1;
} else if (high > Q2) break;
low += low; high += high;
value *= 2;
if ((mask >>= 1) == 0) {
buffer = (ip >= srcend) ? 0 : *(ip++);
mask = 128;
}
value += ((buffer & mask) != 0);
}
c = sym_to_char[sym];
UpdateModel(sym);
if (c < 256) {
if (op >= dstend) return -1;
*(op++) = c;
text_buf[r++] = c;
r &= (N - 1);
} else {
j = c - 255 + THRESHOLD;
range = high - low;
i = BinarySearchPos((unsigned long)
(((value - low + 1) * position_cum[0] - 1) / range));
high = low + (range * position_cum[i ]) / position_cum[0];
low += (range * position_cum[i + 1]) / position_cum[0];
for ( ; ; ) {
if (low >= Q2) {
value -= Q2; low -= Q2; high -= Q2;
} else if (low >= Q1 && high <= Q3) {
value -= Q1; low -= Q1; high -= Q1;
} else if (high > Q2) break;
low += low; high += high;
value *= 2;
if ((mask >>= 1) == 0) {
buffer = (ip >= srcend) ? 0 : *(ip++);
mask = 128;
}
value += ((buffer & mask) != 0);
}
i = (r - i - 1) & (N - 1);
for (k = 0; k < j; k++) {
c = text_buf[(i + k) & (N - 1)];
if (op >= dstend) return -1;
*(op++) = c;
text_buf[r++] = c;
r &= (N - 1);
}
}
}
return 0;
}
int lzari_decompress(unsigned char *data_in, unsigned char *cpage_out,
u32 srclen, u32 destlen)
{
return Decode(data_in, cpage_out, srclen, destlen);
}
#endif /* ((CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_LZO_LZARI)) */

405
fs/jffs2/compr_lzo.c Normal file
View File

@@ -0,0 +1,405 @@
/*
* JFFS2 -- Journalling Flash File System, Version 2.
*
* Copyright (C) 2004 Patrik Kluba,
* University of Szeged, Hungary
*
* For licensing information, see the file 'LICENCE' in the
* jffs2 directory.
*
* $Id: compr_lzo.c,v 1.3 2004/06/23 16:34:39 havasi Exp $
*
*/
/*
LZO1X-1 (and -999) compression module for jffs2
based on the original LZO sources
*/
/* -*- Mode: C; indent-tabs-mode: t; c-basic-offset: 4; tab-width: 4 -*- */
/*
Original copyright notice follows:
lzo1x_9x.c -- implementation of the LZO1X-999 compression algorithm
lzo_ptr.h -- low-level pointer constructs
lzo_swd.ch -- sliding window dictionary
lzoconf.h -- configuration for the LZO real-time data compression library
lzo_mchw.ch -- matching functions using a window
minilzo.c -- mini subset of the LZO real-time data compression library
config1x.h -- configuration for the LZO1X algorithm
lzo1x.h -- public interface of the LZO1X compression algorithm
These files are part of the LZO real-time data compression library.
Copyright (C) 1996-2002 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
Markus F.X.J. Oberhumer
<markus@oberhumer.com>
*/
/*
2004-02-16 pajko <pajko(AT)halom(DOT)u-szeged(DOT)hu>
Initial release
-removed all 16 bit code
-all sensitive data will be on 4 byte boundary
-removed check parts for library use
-removed all but LZO1X-* compression
*/
#include <config.h>
#if ((CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_LZO_LZARI))
#include <linux/stddef.h>
#include <jffs2/jffs2.h>
#include <jffs2/compr_rubin.h>
/* Integral types that have *exactly* the same number of bits as a lzo_voidp */
typedef unsigned long lzo_ptr_t;
typedef long lzo_sptr_t;
/* data type definitions */
#define U32 unsigned long
#define S32 signed long
#define I32 long
#define U16 unsigned short
#define S16 signed short
#define I16 short
#define U8 unsigned char
#define S8 signed char
#define I8 char
#define M1_MAX_OFFSET 0x0400
#define M2_MAX_OFFSET 0x0800
#define M3_MAX_OFFSET 0x4000
#define M4_MAX_OFFSET 0xbfff
#define __COPY4(dst,src) * (lzo_uint32p)(dst) = * (const lzo_uint32p)(src)
#define COPY4(dst,src) __COPY4((lzo_ptr_t)(dst),(lzo_ptr_t)(src))
#define TEST_IP (ip < ip_end)
#define TEST_OP (op <= op_end)
#define NEED_IP(x) \
if ((lzo_uint)(ip_end - ip) < (lzo_uint)(x)) goto input_overrun
#define NEED_OP(x) \
if ((lzo_uint)(op_end - op) < (lzo_uint)(x)) goto output_overrun
#define TEST_LOOKBEHIND(m_pos,out) if (m_pos < out) goto lookbehind_overrun
typedef U32 lzo_uint32;
typedef I32 lzo_int32;
typedef U32 lzo_uint;
typedef I32 lzo_int;
typedef int lzo_bool;
#define lzo_byte U8
#define lzo_bytep U8 *
#define lzo_charp char *
#define lzo_voidp void *
#define lzo_shortp short *
#define lzo_ushortp unsigned short *
#define lzo_uint32p lzo_uint32 *
#define lzo_int32p lzo_int32 *
#define lzo_uintp lzo_uint *
#define lzo_intp lzo_int *
#define lzo_voidpp lzo_voidp *
#define lzo_bytepp lzo_bytep *
#define lzo_sizeof_dict_t sizeof(lzo_bytep)
#define LZO_E_OK 0
#define LZO_E_ERROR (-1)
#define LZO_E_OUT_OF_MEMORY (-2) /* not used right now */
#define LZO_E_NOT_COMPRESSIBLE (-3) /* not used right now */
#define LZO_E_INPUT_OVERRUN (-4)
#define LZO_E_OUTPUT_OVERRUN (-5)
#define LZO_E_LOOKBEHIND_OVERRUN (-6)
#define LZO_E_EOF_NOT_FOUND (-7)
#define LZO_E_INPUT_NOT_CONSUMED (-8)
#define PTR(a) ((lzo_ptr_t) (a))
#define PTR_LINEAR(a) PTR(a)
#define PTR_ALIGNED_4(a) ((PTR_LINEAR(a) & 3) == 0)
#define PTR_ALIGNED_8(a) ((PTR_LINEAR(a) & 7) == 0)
#define PTR_ALIGNED2_4(a,b) (((PTR_LINEAR(a) | PTR_LINEAR(b)) & 3) == 0)
#define PTR_ALIGNED2_8(a,b) (((PTR_LINEAR(a) | PTR_LINEAR(b)) & 7) == 0)
#define PTR_LT(a,b) (PTR(a) < PTR(b))
#define PTR_GE(a,b) (PTR(a) >= PTR(b))
#define PTR_DIFF(a,b) ((lzo_ptrdiff_t) (PTR(a) - PTR(b)))
#define pd(a,b) ((lzo_uint) ((a)-(b)))
typedef ptrdiff_t lzo_ptrdiff_t;
static int
lzo1x_decompress (const lzo_byte * in, lzo_uint in_len,
lzo_byte * out, lzo_uintp out_len, lzo_voidp wrkmem)
{
register lzo_byte *op;
register const lzo_byte *ip;
register lzo_uint t;
register const lzo_byte *m_pos;
const lzo_byte *const ip_end = in + in_len;
lzo_byte *const op_end = out + *out_len;
*out_len = 0;
op = out;
ip = in;
if (*ip > 17)
{
t = *ip++ - 17;
if (t < 4)
goto match_next;
NEED_OP (t);
NEED_IP (t + 1);
do
*op++ = *ip++;
while (--t > 0);
goto first_literal_run;
}
while (TEST_IP && TEST_OP)
{
t = *ip++;
if (t >= 16)
goto match;
if (t == 0)
{
NEED_IP (1);
while (*ip == 0)
{
t += 255;
ip++;
NEED_IP (1);
}
t += 15 + *ip++;
}
NEED_OP (t + 3);
NEED_IP (t + 4);
if (PTR_ALIGNED2_4 (op, ip))
{
COPY4 (op, ip);
op += 4;
ip += 4;
if (--t > 0)
{
if (t >= 4)
{
do
{
COPY4 (op, ip);
op += 4;
ip += 4;
t -= 4;
}
while (t >= 4);
if (t > 0)
do
*op++ = *ip++;
while (--t > 0);
}
else
do
*op++ = *ip++;
while (--t > 0);
}
}
else
{
*op++ = *ip++;
*op++ = *ip++;
*op++ = *ip++;
do
*op++ = *ip++;
while (--t > 0);
}
first_literal_run:
t = *ip++;
if (t >= 16)
goto match;
m_pos = op - (1 + M2_MAX_OFFSET);
m_pos -= t >> 2;
m_pos -= *ip++ << 2;
TEST_LOOKBEHIND (m_pos, out);
NEED_OP (3);
*op++ = *m_pos++;
*op++ = *m_pos++;
*op++ = *m_pos;
goto match_done;
while (TEST_IP && TEST_OP)
{
match:
if (t >= 64)
{
m_pos = op - 1;
m_pos -= (t >> 2) & 7;
m_pos -= *ip++ << 3;
t = (t >> 5) - 1;
TEST_LOOKBEHIND (m_pos, out);
NEED_OP (t + 3 - 1);
goto copy_match;
}
else if (t >= 32)
{
t &= 31;
if (t == 0)
{
NEED_IP (1);
while (*ip == 0)
{
t += 255;
ip++;
NEED_IP (1);
}
t += 31 + *ip++;
}
m_pos = op - 1;
m_pos -= (ip[0] >> 2) + (ip[1] << 6);
ip += 2;
}
else if (t >= 16)
{
m_pos = op;
m_pos -= (t & 8) << 11;
t &= 7;
if (t == 0)
{
NEED_IP (1);
while (*ip == 0)
{
t += 255;
ip++;
NEED_IP (1);
}
t += 7 + *ip++;
}
m_pos -= (ip[0] >> 2) + (ip[1] << 6);
ip += 2;
if (m_pos == op)
goto eof_found;
m_pos -= 0x4000;
}
else
{
m_pos = op - 1;
m_pos -= t >> 2;
m_pos -= *ip++ << 2;
TEST_LOOKBEHIND (m_pos, out);
NEED_OP (2);
*op++ = *m_pos++;
*op++ = *m_pos;
goto match_done;
}
TEST_LOOKBEHIND (m_pos, out);
NEED_OP (t + 3 - 1);
if (t >= 2 * 4 - (3 - 1)
&& PTR_ALIGNED2_4 (op, m_pos))
{
COPY4 (op, m_pos);
op += 4;
m_pos += 4;
t -= 4 - (3 - 1);
do
{
COPY4 (op, m_pos);
op += 4;
m_pos += 4;
t -= 4;
}
while (t >= 4);
if (t > 0)
do
*op++ = *m_pos++;
while (--t > 0);
}
else
{
copy_match:
*op++ = *m_pos++;
*op++ = *m_pos++;
do
*op++ = *m_pos++;
while (--t > 0);
}
match_done:
t = ip[-2] & 3;
if (t == 0)
break;
match_next:
NEED_OP (t);
NEED_IP (t + 1);
do
*op++ = *ip++;
while (--t > 0);
t = *ip++;
}
}
*out_len = op - out;
return LZO_E_EOF_NOT_FOUND;
eof_found:
*out_len = op - out;
return (ip == ip_end ? LZO_E_OK :
(ip <
ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN));
input_overrun:
*out_len = op - out;
return LZO_E_INPUT_OVERRUN;
output_overrun:
*out_len = op - out;
return LZO_E_OUTPUT_OVERRUN;
lookbehind_overrun:
*out_len = op - out;
return LZO_E_LOOKBEHIND_OVERRUN;
}
int lzo_decompress(unsigned char *data_in, unsigned char *cpage_out,
u32 srclen, u32 destlen)
{
lzo_uint outlen = destlen;
return lzo1x_decompress (data_in, srclen, cpage_out, &outlen, NULL);
}
#endif /* ((CONFIG_COMMANDS & CFG_CMD_JFFS2) && defined(CONFIG_JFFS2_LZO_LZARI)) */

View File

@@ -274,7 +274,11 @@ static char *compr_names[] = {
"RUBINMIPS",
"COPY",
"DYNRUBIN",
"ZLIB"
"ZLIB",
#if defined(CONFIG_JFFS2_LZO_LZARI)
"LZO",
"LZARI",
#endif
};
/* Spinning wheel */
@@ -583,6 +587,14 @@ jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest)
case JFFS2_COMPR_ZLIB:
ret = zlib_decompress(src, lDest, jNode->csize, jNode->dsize);
break;
#if defined(CONFIG_JFFS2_LZO_LZARI)
case JFFS2_COMPR_LZO:
ret = lzo_decompress(src, lDest, jNode->csize, jNode->dsize);
break;
case JFFS2_COMPR_LZARI:
ret = lzari_decompress(src, lDest, jNode->csize, jNode->dsize);
break;
#endif
default:
/* unknown */
putLabeledWord("UNKOWN COMPRESSION METHOD = ", jNode->compr);
@@ -760,7 +772,11 @@ jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino)
if (jNode->ino == jDir->ino && jNode->version >= i_version) {
if (i)
put_fl_mem(i);
i = get_fl_mem(b2->offset, sizeof(*i), NULL);
if (jDir->type == DT_LNK)
i = get_node_mem(b2->offset);
else
i = get_fl_mem(b2->offset, sizeof(*i), NULL);
}
b2 = b2->next;
}

View File

@@ -0,0 +1,306 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __address_h
#define __address_h 1
#define KS8695_SDRAM_START 0x00000000
#define KS8695_SDRAM_SIZE 0x01000000
#define KS8695_MEM_SIZE KS8695_SDRAM_SIZE
#define KS8695_MEM_START KS8695_SDRAM_START
#define KS8695_PCMCIA_IO_BASE 0x03800000
#define KS8695_PCMCIA_IO_SIZE 0x00040000
#define KS8695_IO_BASE 0x03FF0000
#define KS8695_IO_SIZE 0x00010000
#define KS8695_SYSTEN_CONFIG 0x00
#define KS8695_SYSTEN_BUS_CLOCK 0x04
#define KS8695_FLASH_START 0x02800000
#define KS8695_FLASH_SIZE 0x00400000
/*i/o control registers offset difinitions*/
#define KS8695_IO_CTRL0 0x4000
#define KS8695_IO_CTRL1 0x4004
#define KS8695_IO_CTRL2 0x4008
#define KS8695_IO_CTRL3 0x400C
/*memory control registers offset difinitions*/
#define KS8695_MEM_CTRL0 0x4010
#define KS8695_MEM_CTRL1 0x4014
#define KS8695_MEM_CTRL2 0x4018
#define KS8695_MEM_CTRL3 0x401C
#define KS8695_MEM_GENERAL 0x4020
#define KS8695_SDRAM_CTRL0 0x4030
#define KS8695_SDRAM_CTRL1 0x4034
#define KS8695_SDRAM_GENERAL 0x4038
#define KS8695_SDRAM_BUFFER 0x403C
#define KS8695_SDRAM_REFRESH 0x4040
/*WAN control registers offset difinitions*/
#define KS8695_WAN_DMA_TX 0x6000
#define KS8695_WAN_DMA_RX 0x6004
#define KS8695_WAN_DMA_TX_START 0x6008
#define KS8695_WAN_DMA_RX_START 0x600C
#define KS8695_WAN_TX_LIST 0x6010
#define KS8695_WAN_RX_LIST 0x6014
#define KS8695_WAN_MAC_LOW 0x6018
#define KS8695_WAN_MAC_HIGH 0x601C
#define KS8695_WAN_MAC_ELOW 0x6080
#define KS8695_WAN_MAC_EHIGH 0x6084
/*LAN control registers offset difinitions*/
#define KS8695_LAN_DMA_TX 0x8000
#define KS8695_LAN_DMA_RX 0x8004
#define KS8695_LAN_DMA_TX_START 0x8008
#define KS8695_LAN_DMA_RX_START 0x800C
#define KS8695_LAN_TX_LIST 0x8010
#define KS8695_LAN_RX_LIST 0x8014
#define KS8695_LAN_MAC_LOW 0x8018
#define KS8695_LAN_MAC_HIGH 0x801C
#define KS8695_LAN_MAC_ELOW 0X8080
#define KS8695_LAN_MAC_EHIGH 0X8084
/*HPNA control registers offset difinitions*/
#define KS8695_HPNA_DMA_TX 0xA000
#define KS8695_HPNA_DMA_RX 0xA004
#define KS8695_HPNA_DMA_TX_START 0xA008
#define KS8695_HPNA_DMA_RX_START 0xA00C
#define KS8695_HPNA_TX_LIST 0xA010
#define KS8695_HPNA_RX_LIST 0xA014
#define KS8695_HPNA_MAC_LOW 0xA018
#define KS8695_HPNA_MAC_HIGH 0xA01C
#define KS8695_HPNA_MAC_ELOW 0xA080
#define KS8695_HPNA_MAC_EHIGH 0xA084
/*UART control registers offset difinitions*/
#define KS8695_UART_RX_BUFFER 0xE000
#define KS8695_UART_TX_HOLDING 0xE004
#define KS8695_UART_FIFO_CTRL 0xE008
#define KS8695_UART_FIFO_TRIG01 0x00
#define KS8695_UART_FIFO_TRIG04 0x80
#define KS8695_UART_FIFO_TXRST 0x03
#define KS8695_UART_FIFO_RXRST 0x02
#define KS8695_UART_FIFO_FEN 0x01
#define KS8695_UART_LINE_CTRL 0xE00C
#define KS8695_UART_LINEC_BRK 0x40
#define KS8695_UART_LINEC_EPS 0x10
#define KS8695_UART_LINEC_PEN 0x08
#define KS8695_UART_LINEC_STP2 0x04
#define KS8695_UART_LINEC_WLEN8 0x03
#define KS8695_UART_LINEC_WLEN7 0x02
#define KS8695_UART_LINEC_WLEN6 0x01
#define KS8695_UART_LINEC_WLEN5 0x00
#define KS8695_UART_MODEM_CTRL 0xE010
#define KS8695_UART_MODEMC_RTS 0x02
#define KS8695_UART_MODEMC_DTR 0x01
#define KS8695_UART_LINE_STATUS 0xE014
#define KS8695_UART_LINES_TXFE 0x20
#define KS8695_UART_LINES_BE 0x10
#define KS8695_UART_LINES_FE 0x08
#define KS8695_UART_LINES_PE 0x04
#define KS8695_UART_LINES_OE 0x02
#define KS8695_UART_LINES_RXFE 0x01
#define KS8695_UART_LINES_ANY (KS8695_UART_LINES_OE|KS8695_UART_LINES_BE|KS8695_UART_LINES_PE|KS8695_UART_LINES_FE)
#define KS8695_UART_MODEM_STATUS 0xE018
#define KS8695_UART_MODEM_DCD 0x80
#define KS8695_UART_MODEM_DSR 0x20
#define KS8695_UART_MODEM_CTS 0x10
#define KS8695_UART_MODEM_DDCD 0x08
#define KS8695_UART_MODEM_DDSR 0x02
#define KS8695_UART_MODEM_DCTS 0x01
#define UART8695_MODEM_ANY 0xFF
#define KS8695_UART_DIVISOR 0xE01C
#define KS8695_UART_STATUS 0xE020
/*Interrupt controlller registers offset difinitions*/
#define KS8695_INT_CONTL 0xE200
#define KS8695_INT_ENABLE 0xE204
#define KS8695_INT_ENABLE_MODEM 0x0800
#define KS8695_INT_ENABLE_ERR 0x0400
#define KS8695_INT_ENABLE_RX 0x0200
#define KS8695_INT_ENABLE_TX 0x0100
#define KS8695_INT_STATUS 0xE208
#define KS8695_INT_WAN_PRIORITY 0xE20C
#define KS8695_INT_HPNA_PRIORITY 0xE210
#define KS8695_INT_LAN_PRIORITY 0xE214
#define KS8695_INT_TIMER_PRIORITY 0xE218
#define KS8695_INT_UART_PRIORITY 0xE21C
#define KS8695_INT_EXT_PRIORITY 0xE220
#define KS8695_INT_CHAN_PRIORITY 0xE224
#define KS8695_INT_BUSERROR_PRO 0xE228
#define KS8695_INT_MASK_STATUS 0xE22C
#define KS8695_FIQ_PEND_PRIORITY 0xE230
#define KS8695_IRQ_PEND_PRIORITY 0xE234
/*timer registers offset difinitions*/
#define KS8695_TIMER_CTRL 0xE400
#define KS8695_TIMER1 0xE404
#define KS8695_TIMER0 0xE408
#define KS8695_TIMER1_PCOUNT 0xE40C
#define KS8695_TIMER0_PCOUNT 0xE410
/*GPIO registers offset difinitions*/
#define KS8695_GPIO_MODE 0xE600
#define KS8695_GPIO_CTRL 0xE604
#define KS8695_GPIO_DATA 0xE608
/*SWITCH registers offset difinitions*/
#define KS8695_SWITCH_CTRL0 0xE800
#define KS8695_SWITCH_CTRL1 0xE804
#define KS8695_SWITCH_PORT1 0xE808
#define KS8695_SWITCH_PORT2 0xE80C
#define KS8695_SWITCH_PORT3 0xE810
#define KS8695_SWITCH_PORT4 0xE814
#define KS8695_SWITCH_PORT5 0xE818
#define KS8695_SWITCH_AUTO0 0xE81C
#define KS8695_SWITCH_AUTO1 0xE820
#define KS8695_SWITCH_LUE_CTRL 0xE824
#define KS8695_SWITCH_LUE_HIGH 0xE828
#define KS8695_SWITCH_LUE_LOW 0xE82C
#define KS8695_SWITCH_ADVANCED 0xE830
#define KS8695_SWITCH_LPPM12 0xE874
#define KS8695_SWITCH_LPPM34 0xE878
/*host communication registers difinitions*/
#define KS8695_DSCP_HIGH 0xE834
#define KS8695_DSCP_LOW 0xE838
#define KS8695_SWITCH_MAC_HIGH 0xE83C
#define KS8695_SWITCH_MAC_LOW 0xE840
/*miscellaneours registers difinitions*/
#define KS8695_MANAGE_COUNTER 0xE844
#define KS8695_MANAGE_DATA 0xE848
#define KS8695_LAN12_POWERMAGR 0xE84C
#define KS8695_LAN34_POWERMAGR 0xE850
#define KS8695_DEVICE_ID 0xEA00
#define KS8695_REVISION_ID 0xEA04
#define KS8695_MISC_CONTROL 0xEA08
#define KS8695_WAN_CONTROL 0xEA0C
#define KS8695_WAN_POWERMAGR 0xEA10
#define KS8695_WAN_PHY_CONTROL 0xEA14
#define KS8695_WAN_PHY_STATUS 0xEA18
/* bus clock definitions*/
#define KS8695_BUS_CLOCK_125MHZ 0x0
#define KS8695_BUS_CLOCK_100MHZ 0x1
#define KS8695_BUS_CLOCK_62MHZ 0x2
#define KS8695_BUS_CLOCK_50MHZ 0x3
#define KS8695_BUS_CLOCK_41MHZ 0x4
#define KS8695_BUS_CLOCK_33MHZ 0x5
#define KS8695_BUS_CLOCK_31MHZ 0x6
#define KS8695_BUS_CLOCK_25MHZ 0x7
/* -------------------------------------------------------------------------------
* definations for IRQ
* -------------------------------------------------------------------------------*/
#define KS8695_INT_EXT_INT0 2
#define KS8695_INT_EXT_INT1 3
#define KS8695_INT_EXT_INT2 4
#define KS8695_INT_EXT_INT3 5
#define KS8695_INT_TIMERINT0 6
#define KS8695_INT_TIMERINT1 7
#define KS8695_INT_UART_TX 8
#define KS8695_INT_UART_RX 9
#define KS8695_INT_UART_LINE_ERR 10
#define KS8695_INT_UART_MODEMS 11
#define KS8695_INT_LAN_STOP_RX 12
#define KS8695_INT_LAN_STOP_TX 13
#define KS8695_INT_LAN_BUF_RX_STATUS 14
#define KS8695_INT_LAN_BUF_TX_STATUS 15
#define KS8695_INT_LAN_RX_STATUS 16
#define KS8695_INT_LAN_TX_STATUS 17
#define KS8695_INT_HPAN_STOP_RX 18
#define KS8695_INT_HPNA_STOP_TX 19
#define KS8695_INT_HPNA_BUF_RX_STATUS 20
#define KS8695_INT_HPNA_BUF_TX_STATUS 21
#define KS8695_INT_HPNA_RX_STATUS 22
#define KS8695_INT_HPNA_TX_STATUS 23
#define KS8695_INT_BUS_ERROR 24
#define KS8695_INT_WAN_STOP_RX 25
#define KS8695_INT_WAN_STOP_TX 26
#define KS8695_INT_WAN_BUF_RX_STATUS 27
#define KS8695_INT_WAN_BUF_TX_STATUS 28
#define KS8695_INT_WAN_RX_STATUS 29
#define KS8695_INT_WAN_TX_STATUS 30
#define KS8695_INT_UART KS8695_INT_UART_TX
/* -------------------------------------------------------------------------------
* Interrupt bit positions
*
* -------------------------------------------------------------------------------
*/
#define KS8695_INTMASK_EXT_INT0 ( 1 << KS8695_INT_EXT_INT0 )
#define KS8695_INTMASK_EXT_INT1 ( 1 << KS8695_INT_EXT_INT1 )
#define KS8695_INTMASK_EXT_INT2 ( 1 << KS8695_INT_EXT_INT2 )
#define KS8695_INTMASK_EXT_INT3 ( 1 << KS8695_INT_EXT_INT3 )
#define KS8695_INTMASK_TIMERINT0 ( 1 << KS8695_INT_TIMERINT0 )
#define KS8695_INTMASK_TIMERINT1 ( 1 << KS8695_INT_TIMERINT1 )
#define KS8695_INTMASK_UART_TX ( 1 << KS8695_INT_UART_TX )
#define KS8695_INTMASK_UART_RX ( 1 << KS8695_INT_UART_RX )
#define KS8695_INTMASK_UART_LINE_ERR ( 1 << KS8695_INT_UART_LINE_ERR )
#define KS8695_INTMASK_UART_MODEMS ( 1 << KS8695_INT_UART_MODEMS )
#define KS8695_INTMASK_LAN_STOP_RX ( 1 << KS8695_INT_LAN_STOP_RX )
#define KS8695_INTMASK_LAN_STOP_TX ( 1 << KS8695_INT_LAN_STOP_TX )
#define KS8695_INTMASK_LAN_BUF_RX_STATUS ( 1 << KS8695_INT_LAN_BUF_RX_STATUS )
#define KS8695_INTMASK_LAN_BUF_TX_STATUS ( 1 << KS8695_INT_LAN_BUF_TX_STATUS )
#define KS8695_INTMASK_LAN_RX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS )
#define KS8695_INTMASK_LAN_TX_STATUS ( 1 << KS8695_INT_LAN_RX_STATUS )
#define KS8695_INTMASK_HPAN_STOP_RX ( 1 << KS8695_INT_HPAN_STOP_RX )
#define KS8695_INTMASK_HPNA_STOP_TX ( 1 << KS8695_INT_HPNA_STOP_TX )
#define KS8695_INTMASK_HPNA_BUF_RX_STATUS ( 1 << KS8695_INT_HPNA_BUF_RX_STATUS )
#define KS8695_INTMAKS_HPNA_BUF_TX_STATUS ( 1 << KS8695_INT_HPNA_BUF_TX_STATUS
#define KS8695_INTMASK_HPNA_RX_STATUS ( 1 << KS8695_INT_HPNA_RX_STATUS )
#define KS8695_INTMASK_HPNA_TX_STATUS ( 1 << KS8695_INT_HPNA_TX_STATUS )
#define KS8695_INTMASK_BUS_ERROR ( 1 << KS8695_INT_BUS_ERROR )
#define KS8695_INTMASK_WAN_STOP_RX ( 1 << KS8695_INT_WAN_STOP_RX )
#define KS8695_INTMASK_WAN_STOP_TX ( 1 << KS8695_INT_WAN_STOP_TX )
#define KS8695_INTMASK_WAN_BUF_RX_STATUS ( 1 << KS8695_INT_WAN_BUF_RX_STATUS )
#define KS8695_INTMASK_WAN_BUF_TX_STATUS ( 1 << KS8695_INT_WAN_BUF_TX_STATUS )
#define KS8695_INTMASK_WAN_RX_STATUS ( 1 << KS8695_INT_WAN_RX_STATUS )
#define KS8695_INTMASK_WAN_TX_STATUS ( 1 << KS8695_INT_WAN_TX_STATUS )
#define KS8695_SC_VALID_INT 0xFFFFFFFF
#define MAXIRQNUM 31
/*
* Timer definitions
*
* Use timer 1 & 2
* (both run at 25MHz).
*
*/
#define TICKS_PER_uSEC 25
#define mSEC_1 1000
#define mSEC_10 (mSEC_1 * 10)
#endif
/* END */

View File

@@ -741,6 +741,8 @@ typedef struct ccsr_pic {
uint frr; /* 0x41000 - Feature Reporting Register */
char res10[28];
uint gcr; /* 0x41020 - Global Configuration Register */
#define MPC85xx_PICGCR_RST 0x80000000
#define MPC85xx_PICGCR_M 0x20000000
char res11[92];
uint vir; /* 0x41080 - Vendor Identification Register */
char res12[12];

View File

@@ -48,38 +48,45 @@
/*
* Serial console configuration
*/
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC */
/* Define this for PSC console
#define CONFIG_PSC_CONSOLE 1
*/
#define CONFIG_EXTUART_CONSOLE 1
#ifdef CONFIG_EXTUART_CONSOLE
# define CONFIG_CONS_INDEX 1
# define CFG_NS16550_SERIAL
# define CFG_NS16550
# define CFG_NS16550_REG_SIZE 1
# define CFG_NS16550_COM1 (CFG_CPLD_BASE + 0x1008)
# define CFG_NS16550_CLK 18432000
#endif
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Supported commands
*/
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_BOOTD | \
CFG_CMD_CACHE | \
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_BOOTD | \
CFG_CMD_CACHE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_NET | \
CFG_CMD_DIAG | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PING | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
#define CONFIG_NET_MULTI
@@ -260,10 +267,17 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/* SDRAM configuration */
#define CFG_SDRAM_TOTAL_BANKS 2
#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
#define CFG_SDRAM_SPD_SIZE 0x40
#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
#define CFG_SDRAM_TOTAL_BANKS 2
#define CFG_SDRAM_SPD_I2C_ADDR 0x51 /* 7bit */
#define CFG_SDRAM_SPD_SIZE 0x40
#define CFG_SDRAM_CAS_LATENCY 4 /* (CL=2)x2 */
/* SDRAM drive strength register */
#define CFG_SDRAM_DRIVE_STRENGTH ((DRIVE_STRENGTH_LOW << SDRAMDS_SBE_SHIFT) | \
(DRIVE_STRENGTH_HIGH << SDRAMDS_SBC_SHIFT) | \
(DRIVE_STRENGTH_LOW << SDRAMDS_SBA_SHIFT) | \
(DRIVE_STRENGTH_OFF << SDRAMDS_SBS_SHIFT) | \
(DRIVE_STRENGTH_LOW << SDRAMDS_SBD_SHIFT))
/*
* Ethernet configuration

View File

@@ -110,8 +110,8 @@
#define CONFIG_MII 1 /* MII PHY management */
#ifndef CONFIG_EXT_PHY
#define CONFIG_PHY_ADDR 0 /* EMAC0 PHY address */
#define CONFIG_PHY1_ADDR 1 /* EMAC1 PHY address */
#define CONFIG_PHY_ADDR 1 /* EMAC0 PHY address */
#define CONFIG_PHY1_ADDR 16 /* EMAC1 PHY address */
#else
#define CONFIG_PHY_ADDR 2 /* PHY address */
#endif

524
include/configs/IDS8247.h Normal file
View File

@@ -0,0 +1,524 @@
/*
* (C) Copyright 2005
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */
#define CONFIG_MPC8272_FAMILY 1
#define CONFIG_IDS8247 1
#define CPU_ID_STR "MPC8247"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"ramargs=setenv bootargs root=/dev/ram rw " \
"console=ttyS0,115200\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
"flash_nfs=run nfsargs addip;" \
"bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
"bootfile=/tftpboot/IDS8247/uImage\0" \
"kernel_addr=ff800000\0" \
"ramdisk_addr=ffa00000\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_MISC_INIT_R 1
/* enable I2C and select the hardware/software driver */
#undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
/*
* Software (bit-bang) I2C driver configuration
*/
#define I2C_PORT 0 /* Port A=0, B=1, C=2, D=3 */
#define I2C_ACTIVE (iop->pdir |= 0x00000080)
#define I2C_TRISTATE (iop->pdir &= ~0x00000080)
#define I2C_READ ((iop->pdat & 0x00000080) != 0)
#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00000080; \
else iop->pdat &= ~0x00000080
#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00000100; \
else iop->pdat &= ~0x00000100
#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
#if 0
#define CFG_I2C_EEPROM_ADDR 0x50
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_PAGE_WRITE_BITS 4
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
#define CONFIG_I2C_X
#endif
/*
* select serial console configuration
* use the extern UART for the console
*/
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
/*
* NS16550 Configuration
*/
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE 1
#define CFG_NS16550_CLK 14745600
#define CFG_UART_BASE 0xE0000000
#define CFG_UART_SIZE 0x10000
#define CFG_NS16550_COM1 (CFG_UART_BASE + 0x8000)
/*
* select ethernet configuration
*
* if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
* CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
* defined elsewhere (as for the console), or CFG_CMD_NET must be removed
* from CONFIG_COMMANDS to remove support for networking.
*
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
#undef CONFIG_ETHER_NONE /* define if ether on something else */
#define CONFIG_ETHER_INDEX 2 /* which SCC/FCC channel for ethernet */
/*
* - Rx-CLK is CLK13
* - Tx-CLK is CLK14
* - RAM for BD/Buffers is on the 60x Bus (see 28-13)
* - Enable Full Duplex in FSMR
*/
# define CFG_CMXFCR_MASK (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
# define CFG_CMXFCR_VALUE (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
# define CFG_CPMFCR_RAMTYPE 0
# define CFG_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
#define CONFIG_8260_CLKIN 66666666 /* in Hz */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_DHCP | \
CFG_CMD_NFS | \
CFG_CMD_NAND | \
CFG_CMD_I2C | \
CFG_CMD_SNTP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/* What should the base address of the main FLASH be and how big is
* it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
* The main FLASH is whichever is connected to *CS0.
*/
#define CFG_FLASH0_BASE 0xFFF00000
#define CFG_FLASH0_SIZE 8
/* Flash bank size (for preliminary settings)
*/
#define CFG_FLASH_SIZE CFG_FLASH0_SIZE
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
#define CFG_MAX_FLASH_SECT 64 /* max num of sects on one chip */
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
/* Environment in flash */
#define CFG_ENV_IS_IN_FLASH 1
#define CFG_ENV_ADDR (CFG_FLASH_BASE+0x60000)
#define CFG_ENV_SIZE 0x20000
#define CFG_ENV_SECT_SIZE 0x20000
/*-----------------------------------------------------------------------
* NAND-FLASH stuff
*-----------------------------------------------------------------------
*/
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
#define CFG_NAND0_BASE 0xE1000000
#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
#define SECTORSIZE 512
#define NAND_NO_RB
#define ADDR_COLUMN 1
#define ADDR_PAGE 2
#define ADDR_COLUMN_PAGE 3
#define NAND_ChipID_UNKNOWN 0x00
#define NAND_MAX_FLOORS 1
#define NAND_MAX_CHIPS 1
#define NAND_DISABLE_CE(nand) do \
{ \
*(((volatile __u8 *)(nand->IO_ADDR)) + 0xc) = 0; \
} while(0)
#define NAND_ENABLE_CE(nand) do \
{ \
*(((volatile __u8 *)(nand->IO_ADDR)) + 0x8) = 0; \
} while(0)
#define NAND_CTL_CLRALE(nandptr) do \
{ \
*(((volatile __u8 *)nandptr) + 0x8) = 0; \
} while(0)
#define NAND_CTL_SETALE(nandptr) do \
{ \
*(((volatile __u8 *)nandptr) + 0x9) = 0; \
} while(0)
#define NAND_CTL_CLRCLE(nandptr) do \
{ \
*(((volatile __u8 *)nandptr) + 0x8) = 0; \
} while(0)
#define NAND_CTL_SETCLE(nandptr) do \
{ \
*(((volatile __u8 *)nandptr) + 0xa) = 0; \
} while(0)
#ifdef NAND_NO_RB
/* constant delay (see also tR in the datasheet) */
#define NAND_WAIT_READY(nand) do { \
udelay(12); \
} while (0)
#else
/* use the R/B pin */
#endif
#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x2)) = (__u8)(d); } while(0)
#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x1)) = (__u8)(d); } while(0)
#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)(adr + 0x0)) = (__u8)d; } while(0)
#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)(adr + 0x0)))
#endif /* CFG_CMD_NAND */
/*-----------------------------------------------------------------------
* Hard Reset Configuration Words
*
* if you change bits in the HRCW, you must also change the CFG_*
* defines for the various registers affected by the HRCW e.g. changing
* HRCW_DPPCxx requires you to also change CFG_SIUMCR.
*/
#define CFG_HRCW_MASTER (HRCW_BPS01 | HRCW_BMS | HRCW_ISB100 | HRCW_APPC10 | HRCW_MODCK_H1000)
/* no slaves so just fill with zeros */
#define CFG_HRCW_SLAVE1 0
#define CFG_HRCW_SLAVE2 0
#define CFG_HRCW_SLAVE3 0
#define CFG_HRCW_SLAVE4 0
#define CFG_HRCW_SLAVE5 0
#define CFG_HRCW_SLAVE6 0
#define CFG_HRCW_SLAVE7 0
/*-----------------------------------------------------------------------
* Internal Memory Mapped Register
*/
#define CFG_IMMR 0xF0000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
#define CFG_INIT_RAM_ADDR CFG_IMMR
#define CFG_INIT_RAM_END 0x2000 /* End of used area in DPRAM */
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data*/
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CFG_SDRAM_BASE _must_ start at 0
*
* 60x SDRAM is mapped at CFG_SDRAM_BASE
*/
#define CFG_SDRAM_BASE 0x00000000
#define CFG_FLASH_BASE CFG_FLASH0_BASE
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
/*
* Internal Definitions
*
* Boot Flags
*/
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH*/
#define BOOTFLAG_WARM 0x02 /* Software reboot */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* HIDx - Hardware Implementation-dependent Registers 2-11
*-----------------------------------------------------------------------
* HID0 also contains cache control - initially enable both caches and
* invalidate contents, then the final state leaves only the instruction
* cache enabled. Note that Power-On and Hard reset invalidate the caches,
* but Soft reset does not.
*
* HID1 has only read-only information - nothing to set.
*/
#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
#define CFG_HID0_FINAL 0
#define CFG_HID2 0
/*-----------------------------------------------------------------------
* RMR - Reset Mode Register 5-5
*-----------------------------------------------------------------------
* turn on Checkstop Reset Enable
*/
#define CFG_RMR 0
/*-----------------------------------------------------------------------
* BCR - Bus Configuration 4-25
*-----------------------------------------------------------------------
*/
#define CFG_BCR 0
/*-----------------------------------------------------------------------
* SIUMCR - SIU Module Configuration 4-31
*-----------------------------------------------------------------------
*/
#define CFG_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10|SIUMCR_BCTLC01)
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 4-35
* SYPCR can only be written once after reset!
*-----------------------------------------------------------------------
* Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
*/
#if defined(CONFIG_WATCHDOG)
#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
#else
#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
SYPCR_SWRI|SYPCR_SWP)
#endif /* CONFIG_WATCHDOG */
/*-----------------------------------------------------------------------
* TMCNTSC - Time Counter Status and Control 4-40
*-----------------------------------------------------------------------
* Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
* and enable Time Counter
*/
#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
/*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control 4-42
*-----------------------------------------------------------------------
* Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
* Periodic timer
*/
#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
/*-----------------------------------------------------------------------
* SCCR - System Clock Control 9-8
*-----------------------------------------------------------------------
* Ensure DFBRG is Divide by 16
*/
#define CFG_SCCR (0x00000028 | SCCR_DFBRG01)
/*-----------------------------------------------------------------------
* RCCR - RISC Controller Configuration 13-7
*-----------------------------------------------------------------------
*/
#define CFG_RCCR 0
/*
* Init Memory Controller:
*
* Bank Bus Machine PortSz Device
* ---- --- ------- ------ ------
* 0 60x GPCM 16 bit FLASH
* 1 60x GPCM 8 bit NAND
* 2 60x SDRAM 32 bit SDRAM
* 3 60x GPCM 8 bit UART
*
*/
#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
/* Minimum mask to separate preliminary
* address ranges for CS[0:2]
*/
#define CFG_GLOBAL_SDRAM_LIMIT (32<<20) /* less than 32 MB */
#define CFG_MPTPR 0x6600
/*-----------------------------------------------------------------------------
* Address for Mode Register Set (MRS) command
*-----------------------------------------------------------------------------
*/
#define CFG_MRS_OFFS 0x00000110
/* Bank 0 - FLASH
*/
#define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BRx_BA_MSK) |\
BRx_PS_8 |\
BRx_MS_GPCM_P |\
BRx_V)
#define CFG_OR0_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE) |\
ORxG_SCY_6_CLK )
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
/* Bank 1 - NAND Flash
*/
#define CFG_NAND_BASE CFG_NAND0_BASE
#define CFG_NAND_SIZE 0x8000
#define CFG_OR_TIMING_NAND 0x000036
#define CFG_BR1_PRELIM ((CFG_NAND_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V )
#define CFG_OR1_PRELIM (P2SZ_TO_AM(CFG_NAND_SIZE) | CFG_OR_TIMING_NAND )
#endif
/* Bank 2 - 60x bus SDRAM
*/
#define CFG_PSRT 0x20
#define CFG_LSRT 0x20
#define CFG_BR2_PRELIM ((CFG_SDRAM_BASE & BRx_BA_MSK) |\
BRx_PS_32 |\
BRx_MS_SDRAM_P |\
BRx_V)
#define CFG_OR2_PRELIM CFG_OR2
/* SDRAM initialization values
*/
#define CFG_OR2 ((~(CFG_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
ORxS_BPD_4 |\
ORxS_ROWST_PBI0_A10 |\
ORxS_NUMR_12)
#define CFG_PSDMR (PSDMR_SDAM_A13_IS_A5 |\
PSDMR_BSMA_A15_A17 |\
PSDMR_SDA10_PBI0_A11 |\
PSDMR_RFRC_5_CLK |\
PSDMR_PRETOACT_2W |\
PSDMR_ACTTORW_2W |\
PSDMR_BL |\
PSDMR_LDOTOPRE_2C |\
PSDMR_WRC_3C |\
PSDMR_CL_3)
/* Bank 3 - UART
*/
#define CFG_BR3_PRELIM ((CFG_UART_BASE & BRx_BA_MSK) | BRx_PS_8 | BRx_MS_GPCM_P | BRx_V )
#define CFG_OR3_PRELIM (((-CFG_UART_SIZE) & ORxG_AM_MSK) | ORxG_CSNT | ORxG_SCY_1_CLK | ORxG_TRLX )
#endif /* __CONFIG_H */

View File

@@ -122,6 +122,7 @@
CFG_CMD_DHCP | \
CFG_CMD_I2C | \
CFG_CMD_NAND | \
CFG_CMD_JFFS2 | \
CFG_CMD_NFS | \
CFG_CMD_SNTP )
@@ -398,5 +399,10 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */
#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */
#define CONFIG_JFFS2_NAND_SIZE 4*1024*1024 /* size of jffs2 partition */
#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */
#endif /* __CONFIG_H */

View File

@@ -28,8 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
#include <asm/processor.h>
#ifndef __ASSEMBLY__
#include <galileo/core.h>
#endif
@@ -66,7 +64,7 @@
* mpsc channel, change CONFIG_MPSC_PORT to the desired value.
*/
#define CONFIG_MPSC
#define CONFIG_MPSC_PORT 1
#define CONFIG_MPSC_PORT 0
#define CONFIG_NET_MULTI /* attempt all available adapters */
@@ -75,20 +73,46 @@
#undef CONFIG_ETHER_PORT_MII /* use RMII */
#if 1
#if 0
#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#endif
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"bootp;" \
"setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
"ip=$ipaddr:$serverip:$gatewayip:" \
"$netmask:$hostname:eth0:none;" \
"bootm"
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=p3g4\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath)\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"addip=setenv bootargs $(bootargs) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
":$(hostname):$(netdev):off panic=1\0" \
"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
"flash_nfs=run nfsargs addip addtty;" \
"bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip addtty;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk/ppc_74xx\0" \
"bootfile=/tftpboot/p3g4/uImage\0" \
"kernel_addr=ff000000\0" \
"ramdisk_addr=ff010000\0" \
"load=tftp 100000 /tftpboot/p3g4/u-boot.bin\0" \
"update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
"cp.b 100000 fff00000 $(filesize);" \
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_LOADS_ECHO 0 /* echo off for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */
@@ -101,7 +125,15 @@
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_ASKENV)
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
CFG_CMD_PCI | \
CFG_CMD_ELF | \
CFG_CMD_MII | \
CFG_CMD_PING | \
CFG_CMD_UNIVERSE| \
CFG_CMD_BSP )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -271,21 +303,20 @@
/* PCI MEMORY MAP section */
#define CFG_PCI0_MEM_BASE 0x80000000
#define CFG_PCI0_MEM_SIZE _128M
#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
#define CFG_PCI1_MEM_BASE 0x88000000
#define CFG_PCI1_MEM_SIZE _128M
#define CFG_PCI0_0_MEM_SPACE (CFG_PCI0_MEM_BASE)
#define CFG_PCI1_0_MEM_SPACE (CFG_PCI1_MEM_BASE)
/* PCI I/O MAP section */
#define CFG_PCI0_IO_BASE 0xfa000000
#define CFG_PCI0_IO_SIZE _16M
#define CFG_PCI1_IO_BASE 0xfb000000
#define CFG_PCI1_IO_SIZE _16M
#define CFG_PCI0_IO_SPACE (CFG_PCI0_IO_BASE)
#define CFG_PCI0_IO_SPACE_PCI 0x00000000
#define CFG_PCI1_IO_BASE 0xfb000000
#define CFG_PCI1_IO_SIZE _16M
#define CFG_PCI1_IO_SPACE (CFG_PCI1_IO_BASE)
#define CFG_PCI1_IO_SPACE_PCI 0x00000000

View File

@@ -212,7 +212,7 @@
#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
#define CFG_PCI_PTM1MS 0xf8000001 /* 128MB, enable hard-wired to 1 */
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */

View File

@@ -252,7 +252,7 @@
#define CFG_EBC_PB1CR FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/
/* Memory Bank 2 (CAN0, 1, RTC) initialization */
#define CFG_EBC_PB2AP 0x03000040 /* TWT=6,TH=0,CSN=0,OEN=0,WBN=0,WBF=0 */
#define CFG_EBC_PB2AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */
#define CFG_EBC_PB2CR CAN_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
/* Memory Bank 3 (CompactFlash IDE, FPGA internal) initialization */

View File

@@ -106,8 +106,8 @@
#define CONFIG_MII 1 /* MII PHY management */
#ifndef CONFIG_EXT_PHY
#define CONFIG_PHY_ADDR 0 /* EMAC0 PHY address */
#define CONFIG_PHY1_ADDR 1 /* EMAC1 PHY address */
#define CONFIG_PHY_ADDR 1 /* EMAC0 PHY address */
#define CONFIG_PHY1_ADDR 2 /* EMAC1 PHY address */
#else
#define CONFIG_PHY_ADDR 2 /* PHY address */
#endif
@@ -772,7 +772,7 @@
#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */
#define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */
#define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */
#define CONFIG_JFFS2_NAND_SIZE 2*1024*1024 /* size of jffs2 partition */
#define CONFIG_JFFS2_NAND_SIZE 4*1024*1024 /* size of jffs2 partition */
#define NAND_CACHE_PAGES 16 /* size of nand cache in 512 bytes pages */
#endif /* __CONFIG_H */

View File

@@ -195,7 +195,7 @@
#define CFG_RAMBOOT
#endif
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CFG_ENV_IS_IN_FLASH

View File

@@ -279,7 +279,7 @@
#endif
#define CONFIG_MII 1 /* MII PHY management */
#undef CONFIG_MPC85XX_TSEC1
#define CONFIG_MPC85XX_TSEC1 1
#define CONFIG_MPC85XX_TSEC2 1
#define TSEC1_PHY_ADDR 0
#define TSEC2_PHY_ADDR 1
@@ -287,9 +287,12 @@
#define TSEC2_PHYIDX 0
#define CONFIG_MPC85XX_FEC 1
#define FEC_PHY_ADDR 0
#define FEC_PHY_ADDR 2
#define FEC_PHYIDX 0
#define CONFIG_HAS_ETH1
#define CONFIG_HAS_ETH2
#define CONFIG_ETHPRIME "ENET1"
#endif /* CONFIG_TSEC_ENET */

View File

@@ -279,18 +279,17 @@
#define TSEC2_PHY_ADDR 1
#define TSEC2_PHYIDX 0
#endif /* CONFIG_TSEC_ENET */
#define CONFIG_ETHER_ON_FCC
#define CONFIG_ETHER_ON_FCC3
#define CFG_CMXFCR_MASK3 (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
#define CFG_CMXFCR_VALUE3 (CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK14)
#define CFG_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15 | CMXFCR_TF3CS_CLK14)
#define CFG_CPMFCR_RAMTYPE 0
#define CFG_FCC_PSMR (FCC_PSMR_FDE)
#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
#define CONFIG_ETHPRIME "ENET1"
#endif /* CONFIG_TSEC_ENET */
/*
* Environment
*/

View File

@@ -136,13 +136,11 @@
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_IDE | \
CFG_CMD_NFS | \
CFG_CMD_SNTP )
CFG_CMD_NFS )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>

Some files were not shown because too many files have changed in this diff Show More