8b549c0b23
This removes the following symbols: CONFIG_SYS_FSL_DSPI_BE CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET CONFIG_SYS_FSL_DSP_DDR_ADDR CONFIG_SYS_FSL_DSP_M2_RAM_ADDR CONFIG_SYS_FSL_DSP_M3_RAM_ADDR CONFIG_SYS_FSL_ERRATUM_A008751 CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT CONFIG_SYS_FSL_ESDHC_NUM CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET CONFIG_SYS_FSL_ISBC_VER CONFIG_SYS_FSL_QSPI_LE CONFIG_SYS_FSL_SCFG_IODSECR1_ADDR CONFIG_SYS_FSL_SCFG_IODSECR1_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR CONFIG_SYS_FSL_SRDS_NUM_PLLS CONFIG_SYS_FSL_WDOG_BE CONFIG_SYS_GP1DIR CONFIG_SYS_GP1ODR CONFIG_SYS_GP2DIR CONFIG_SYS_GP2ODR CONFIG_SYS_HALT_BEFOR_RAM_JUMP CONFIG_SYS_HMI_BASE FSL_QSPI_FLASH_NUM FSL_QSPI_FLASH_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
191 lines
6.4 KiB
C
191 lines
6.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
|
|
*
|
|
* (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
|
|
*/
|
|
|
|
#ifndef _CONFIG_EB_CPU5282_H_
|
|
#define _CONFIG_EB_CPU5282_H_
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* High Level Configuration Options (easy to change) *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_UART_PORT (0)
|
|
|
|
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Options *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#define STATUS_LED_ACTIVE 0
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Configuration for environment *
|
|
* Environment is in the second sector of the first 256k of flash *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
/*#define CONFIG_SYS_DRAM_TEST 1 */
|
|
#undef CONFIG_SYS_DRAM_TEST
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Clock and PLL Configuration *
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
|
|
|
|
/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
|
|
|
|
#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
|
|
#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Network *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_MCFFEC
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*-----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_MBAR 0x40000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*-----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE0 0x00000000
|
|
#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
|
|
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN 0x20000
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization ??
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
|
|
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
|
|
#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
|
|
#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
|
|
|
|
#define CONFIG_SYS_FLASH_SIZE 16*1024*1024
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
|
|
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 8)
|
|
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 4)
|
|
#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
|
|
#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
|
|
CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
|
|
CF_ACR_EN | CF_ACR_SM_ALL)
|
|
#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
|
|
CF_CACR_CEIB | CF_CACR_DBWE | \
|
|
CF_CACR_EUSP)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory bank definitions
|
|
*/
|
|
|
|
#define CONFIG_SYS_CS0_BASE 0xFF000000
|
|
#define CONFIG_SYS_CS0_CTRL 0x00001980
|
|
#define CONFIG_SYS_CS0_MASK 0x00FF0001
|
|
|
|
#define CONFIG_SYS_CS2_BASE 0xE0000000
|
|
#define CONFIG_SYS_CS2_CTRL 0x00001980
|
|
#define CONFIG_SYS_CS2_MASK 0x000F0001
|
|
|
|
#define CONFIG_SYS_CS3_BASE 0xE0100000
|
|
#define CONFIG_SYS_CS3_CTRL 0x00001980
|
|
#define CONFIG_SYS_CS3_MASK 0x000F0001
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Port configuration
|
|
*/
|
|
#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
|
|
#define CONFIG_SYS_PADDR 0x0000000
|
|
#define CONFIG_SYS_PADAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
|
|
#define CONFIG_SYS_PBDDR 0x0000000
|
|
#define CONFIG_SYS_PBDAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
|
|
#define CONFIG_SYS_PCDDR 0x0000000
|
|
#define CONFIG_SYS_PCDAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
|
|
#define CONFIG_SYS_PCDDR 0x0000000
|
|
#define CONFIG_SYS_PCDAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PASPAR 0x0F0F
|
|
#define CONFIG_SYS_PEHLPAR 0xC0
|
|
#define CONFIG_SYS_PUAPAR 0x0F
|
|
#define CONFIG_SYS_DDRUA 0x05
|
|
#define CONFIG_SYS_PJPAR 0xFF
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_DS1338
|
|
#define CONFIG_I2C_RTC_ADDR 0x68
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* VIDEO configuration
|
|
*/
|
|
|
|
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
|
|
#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
|
|
#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE
|
|
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001
|
|
|
|
#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
|
|
#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
|
|
#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002
|
|
|
|
#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
|
|
#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
|
|
#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004
|
|
|
|
#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
|
|
#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
|
|
#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2
|
|
|
|
#endif /* _CONFIG_M5282EVB_H */
|
|
/*---------------------------------------------------------------------*/
|