u-boot/arch/arm
Pali Rohár 3b44b3fdf2 arm: mvebu: Add support for programming LD0 and LD1 eFuse
This patch implements LD eFuse programming support. Armada 385 contains two
LD eFuse lines, each is 256 bit long with one additional lock bit. LD 0
line is mapped to U-Boot fuse bank 64 and LD 1 line to fuse bank 65. U-Boot
32-bit fuse words 0-8 are mapped to LD eFuse line bits 0-255. U-Boot fuse
word 9 is mapped to LD eFuse line lock bit.

So to program LD 1 General Purpose Data line, use U-Boot fuse command:

    => fuse prog -y 65 0 0x76543210
    => fuse prog -y 65 1 0xfedcba98
    => fuse prog -y 65 2 0x76543210
    => fuse prog -y 65 3 0xfedcba98
    => fuse prog -y 65 4 0x76543210
    => fuse prog -y 65 5 0xfedcba98
    => fuse prog -y 65 6 0x76543210
    => fuse prog -y 65 7 0xfedcba98
    => fuse prog -y 65 8 0x1

Signed-off-by: Pali Rohár <pali@kernel.org>
2022-10-06 10:15:35 +02:00
..
cpu ARMv8/sec_firmware: Convert to use fit_get_data_conf_prop 2022-09-07 13:40:45 +08:00
dts board/km: remove kirkwood boards 2022-10-06 10:13:38 +02:00
include - Increase SYS_MALLOC_F_LEN for STM32 MCU's board 2022-09-27 08:53:51 -04:00
lib treewide: Drop bootm_headers_t typedef 2022-09-29 16:07:57 -04:00
mach-apple arm: apple: Add initial Apple M2 support 2022-07-25 09:38:47 -04:00
mach-aspeed treewide: Drop image_header_t typedef 2022-09-29 16:07:57 -04:00
mach-at91 cyclic: Use schedule() instead of WATCHDOG_RESET() 2022-09-18 10:26:33 +02:00
mach-bcm283x
mach-bcmbca arm: bcmbca: introduce the bcmbca architecture and 47622 SOC 2022-06-10 13:37:32 -04:00
mach-bcmstb
mach-cortina
mach-davinci arm: Remove unused references to CONFIG_SOC_DM* 2022-07-25 14:57:27 -04:00
mach-exynos arm: samsung: Migrate a number of symbols to Kconfig 2022-06-28 17:04:37 -04:00
mach-highbank
mach-hpe ARM: hpe: gxp: add core support 2022-06-22 21:30:04 -04:00
mach-imx treewide: Drop image_header_t typedef 2022-09-29 16:07:57 -04:00
mach-integrator
mach-ipq40xx arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings 2022-08-26 10:55:46 -04:00
mach-k3 treewide: Drop image_header_t typedef 2022-09-29 16:07:57 -04:00
mach-keystone treewide: Drop image_header_t typedef 2022-09-29 16:07:57 -04:00
mach-kirkwood arm: mvebu: Mark constant data with const keyword 2022-09-13 06:38:08 +02:00
mach-lpc32xx net: lpc32xx_eth.c ethernet driver 2022-08-20 21:18:15 -04:00
mach-mediatek arm: mediatek: add support for MediaTek MT7981 SoC 2022-09-23 15:09:15 -04:00
mach-meson ARM: meson: fixup error on efuse commands return 2022-08-08 09:56:38 +02:00
mach-mvebu arm: mvebu: Add support for programming LD0 and LD1 eFuse 2022-10-06 10:15:35 +02:00
mach-nexell
mach-npcm
mach-octeontx
mach-octeontx2
mach-omap2 Convert CONFIG_SYS_L2_PL310 to Kconfig 2022-09-01 17:18:42 -04:00
mach-orion5x arm: Remove edminiv2 board 2022-08-20 21:18:15 -04:00
mach-owl
mach-qemu
mach-rmobile arm: Remove kzm9g board 2022-08-20 21:18:15 -04:00
mach-rockchip board_f: Fix types for board_get_usable_ram_top() 2022-09-23 15:12:42 -04:00
mach-s5pc1xx
mach-snapdragon arm: dts: qcom: Sync pinctrl DT nodes with Linux bindings 2022-08-26 10:55:46 -04:00
mach-socfpga treewide: Drop bootm_headers_t typedef 2022-09-29 16:07:57 -04:00
mach-sti stm32mp1: fix reference for STMicroelectronics 2022-06-17 14:12:27 +02:00
mach-stm32
mach-stm32mp - Increase SYS_MALLOC_F_LEN for STM32 MCU's board 2022-09-27 08:53:51 -04:00
mach-sunxi treewide: Drop image_header_t typedef 2022-09-29 16:07:57 -04:00
mach-tegra dm: core: Drop ofnode_is_available() 2022-09-29 16:11:31 -04:00
mach-u8500
mach-uniphier serial: Replace CONFIG_DEBUG_UART_BASE by CONFIG_VAL(DEBUG_UART_BASE) 2022-06-06 18:01:21 -04:00
mach-versal arm64: versal: Define zynqmp_mmio_write() for versal 2022-09-13 11:32:48 +02:00
mach-versal-net spi: cadence_qspi: Add support for Versal NET platform 2022-09-26 14:23:29 +02:00
mach-versatile
mach-zynq ARM: zynq: Align bss and end of u-boot image to 64bits 2022-09-13 11:32:48 +02:00
mach-zynqmp mailbox: zynqmp: Move struct zynqmp_ipi_msg from sys_proto.h 2022-07-26 08:36:20 +02:00
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk Makefile: Allow LTO to be disabled for a build 2022-09-02 16:20:11 -04:00
Kconfig arm64: versal-net: Add support for Versal NET platform 2022-09-26 14:23:29 +02:00
Kconfig.debug
Makefile arm64: versal-net: Add support for Versal NET platform 2022-09-26 14:23:29 +02:00