leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
u-boot/arch/x86/dts/minnowmax.dts
Bin Meng c79cbb5952 x86: dts: Define a default TSC timer frequency 
If for some reason, TSC timer frequency cannot be determined from
hardware, nor is it specified in the device tree, U-Boot will panic
resulting in endless reset during boot.

Let's define a default TSC timer frequency using the Kconfig value
CONFIG_X86_TSC_TIMER_FREQ (note: #include must be used instead of
/include/ otherwise the macro is not pre-processed).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-08-02 15:11:40 +08:00

331 lines
7.4 KiB
Plaintext
Raw Permalink Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
*/
/dts-v1/;
#include <asm/arch-baytrail/fsp/fsp_configs.h>
#include <dt-bindings/gpio/x86-gpio.h>
#include <dt-bindings/interrupt-router/intel-irq.h>
/include/ "skeleton.dtsi"
/include/ "serial.dtsi"
/include/ "reset.dtsi"
/include/ "rtc.dtsi"
#include "tsc_timer.dtsi"
#include "smbios.dtsi"
/ {
model = "Intel Minnowboard Max";
compatible = "intel,minnowmax", "intel,baytrail";
aliases {
serial0 = &serial;
spi0 = &spi;
};
config {
silent_console = <0>;
};
pch_pinctrl {
compatible = "intel,x86-pinctrl";
reg = <0 0>;
/* GPIO E0 */
soc_gpio_s5_0@0 {
gpio-offset = <0x80 0>;
mode-gpio;
output-value = <0>;
direction = <PIN_OUTPUT>;
};
/* GPIO E1 */
soc_gpio_s5_1@0 {
gpio-offset = <0x80 1>;
mode-gpio;
output-value = <0>;
direction = <PIN_OUTPUT>;
};
/* GPIO E2 */
soc_gpio_s5_2@0 {
gpio-offset = <0x80 2>;
mode-gpio;
output-value = <0>;
direction = <PIN_OUTPUT>;
};
pin_usb_host_en0@0 {
gpio-offset = <0x80 8>;
mode-gpio;
output-value = <1>;
direction = <PIN_OUTPUT>;
};
pin_usb_host_en1@0 {
gpio-offset = <0x80 9>;
mode-gpio;
output-value = <1>;
direction = <PIN_OUTPUT>;
};
/*
* As of today, the latest version FSP (gold4) for BayTrail
* misses the PAD configuration of the SD controller's Card
* Detect signal. The default PAD value for the CD pin sets
* the pin to work in GPIO mode, which causes card detect
* status cannot be reflected by the Present State register
* in the SD controller (bit 16 & bit 18 are always zero).
*
* Configure this pin to function 1 (SD controller).
*/
sdmmc3_cd@0 {
pad-offset = <0x3a0>;
mode-func = <1>;
};
};
chosen {
stdout-path = "/serial";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <0>;
intel,apic-id = <0>;
};
cpu@1 {
device_type = "cpu";
compatible = "intel,baytrail-cpu";
reg = <1>;
intel,apic-id = <4>;
};
};
pci {
compatible = "intel,pci-baytrail", "pci-x86";
#address-cells = <3>;
#size-cells = <2>;
u-boot,dm-pre-reloc;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
0x01000000 0x0 0x2000 0x2000 0 0xe000>;
pch@1f,0 {
reg = <0x0000f800 0 0 0 0>;
compatible = "pci8086,0f1c", "intel,pch9";
#address-cells = <1>;
#size-cells = <1>;
irq-router {
compatible = "intel,irq-router";
intel,pirq-config = "ibase";
intel,ibase-offset = <0x50>;
intel,actl-addr = <0>;
intel,pirq-link = <8 8>;
intel,pirq-mask = <0xdee0>;
intel,pirq-routing = <
/* BayTrail PCI devices */
PCI_BDF(0, 2, 0) INTA PIRQA
PCI_BDF(0, 3, 0) INTA PIRQA
PCI_BDF(0, 16, 0) INTA PIRQA
PCI_BDF(0, 17, 0) INTA PIRQA
PCI_BDF(0, 18, 0) INTA PIRQA
PCI_BDF(0, 19, 0) INTA PIRQA
PCI_BDF(0, 20, 0) INTA PIRQA
PCI_BDF(0, 21, 0) INTA PIRQA
PCI_BDF(0, 22, 0) INTA PIRQA
PCI_BDF(0, 23, 0) INTA PIRQA
PCI_BDF(0, 24, 0) INTA PIRQA
PCI_BDF(0, 24, 1) INTC PIRQC
PCI_BDF(0, 24, 2) INTD PIRQD
PCI_BDF(0, 24, 3) INTB PIRQB
PCI_BDF(0, 24, 4) INTA PIRQA
PCI_BDF(0, 24, 5) INTC PIRQC
PCI_BDF(0, 24, 6) INTD PIRQD
PCI_BDF(0, 24, 7) INTB PIRQB
PCI_BDF(0, 26, 0) INTA PIRQA
PCI_BDF(0, 27, 0) INTA PIRQA
PCI_BDF(0, 28, 0) INTA PIRQA
PCI_BDF(0, 28, 1) INTB PIRQB
PCI_BDF(0, 28, 2) INTC PIRQC
PCI_BDF(0, 28, 3) INTD PIRQD
PCI_BDF(0, 29, 0) INTA PIRQA
PCI_BDF(0, 30, 0) INTA PIRQA
PCI_BDF(0, 30, 1) INTD PIRQD
PCI_BDF(0, 30, 2) INTB PIRQB
PCI_BDF(0, 30, 3) INTC PIRQC
PCI_BDF(0, 30, 4) INTD PIRQD
PCI_BDF(0, 30, 5) INTB PIRQB
PCI_BDF(0, 31, 3) INTB PIRQB
/*
* PCIe root ports downstream
* interrupts
*/
PCI_BDF(1, 0, 0) INTA PIRQA
PCI_BDF(1, 0, 0) INTB PIRQB
PCI_BDF(1, 0, 0) INTC PIRQC
PCI_BDF(1, 0, 0) INTD PIRQD
PCI_BDF(2, 0, 0) INTA PIRQB
PCI_BDF(2, 0, 0) INTB PIRQC
PCI_BDF(2, 0, 0) INTC PIRQD
PCI_BDF(2, 0, 0) INTD PIRQA
PCI_BDF(3, 0, 0) INTA PIRQC
PCI_BDF(3, 0, 0) INTB PIRQD
PCI_BDF(3, 0, 0) INTC PIRQA
PCI_BDF(3, 0, 0) INTD PIRQB
PCI_BDF(4, 0, 0) INTA PIRQD
PCI_BDF(4, 0, 0) INTB PIRQA
PCI_BDF(4, 0, 0) INTC PIRQB
PCI_BDF(4, 0, 0) INTD PIRQC
>;
};
spi: spi {
#address-cells = <1>;
#size-cells = <0>;
compatible = "intel,ich9-spi";
spi-flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
m25p,fast-read;
compatible = "stmicro,n25q064a",
"jedec,spi-nor";
memory-map = <0xff800000 0x00800000>;
rw-mrc-cache {
label = "rw-mrc-cache";
reg = <0x006f0000 0x00010000>;
};
};
};
gpioa {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0 0x20>;
bank-name = "A";
use-lvl-write-cache;
};
gpiob {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x20 0x20>;
bank-name = "B";
use-lvl-write-cache;
};
gpioc {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x40 0x20>;
bank-name = "C";
use-lvl-write-cache;
};
gpiod {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x60 0x20>;
bank-name = "D";
use-lvl-write-cache;
};
gpioe {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0x80 0x20>;
bank-name = "E";
use-lvl-write-cache;
};
gpiof {
compatible = "intel,ich6-gpio";
u-boot,dm-pre-reloc;
reg = <0xA0 0x20>;
bank-name = "F";
use-lvl-write-cache;
};
};
};
fsp {
compatible = "intel,baytrail-fsp";
fsp,mrc-init-tseg-size = <MRC_INIT_TSEG_SIZE_1MB>;
fsp,mrc-init-mmio-size = <MRC_INIT_MMIO_SIZE_2048MB>;
fsp,mrc-init-spd-addr1 = <0xa0>;
fsp,mrc-init-spd-addr2 = <0xa2>;
fsp,emmc-boot-mode = <EMMC_BOOT_MODE_AUTO>;
fsp,enable-sdio;
fsp,enable-sdcard;
fsp,enable-hsuart1;
fsp,enable-spi;
fsp,enable-sata;
fsp,sata-mode = <SATA_MODE_AHCI>;
#ifdef CONFIG_USB_XHCI_HCD
fsp,enable-xhci;
#endif
fsp,lpe-mode = <LPE_MODE_PCI>;
fsp,lpss-sio-mode = <LPSS_SIO_MODE_PCI>;
fsp,enable-dma0;
fsp,enable-dma1;
fsp,enable-i2c0;
fsp,enable-i2c1;
fsp,enable-i2c2;
fsp,enable-i2c3;
fsp,enable-i2c4;
fsp,enable-i2c5;
fsp,enable-i2c6;
fsp,enable-pwm0;
fsp,enable-pwm1;
fsp,igd-dvmt50-pre-alloc = <IGD_DVMT50_PRE_ALLOC_64MB>;
fsp,aperture-size = <APERTURE_SIZE_256MB>;
fsp,gtt-size = <GTT_SIZE_2MB>;
fsp,scc-mode = <SCC_MODE_PCI>;
fsp,os-selection = <OS_SELECTION_LINUX>;
fsp,emmc45-ddr50-enabled;
fsp,emmc45-retune-timer-value = <8>;
fsp,enable-igd;
fsp,enable-memory-down;
fsp,memory-down-params {
compatible = "intel,baytrail-fsp-mdp";
fsp,dram-speed = <DRAM_SPEED_1066MTS>;
fsp,dram-type = <DRAM_TYPE_DDR3L>;
fsp,dimm-0-enable;
fsp,dimm-width = <DIMM_WIDTH_X16>;
fsp,dimm-density = <DIMM_DENSITY_4GBIT>;
fsp,dimm-bus-width = <DIMM_BUS_WIDTH_64BITS>;
fsp,dimm-sides = <DIMM_SIDES_1RANKS>;
fsp,dimm-tcl = <0xb>;
fsp,dimm-trpt-rcd = <0xb>;
fsp,dimm-twr = <0xc>;
fsp,dimm-twtr = <6>;
fsp,dimm-trrd = <6>;
fsp,dimm-trtp = <6>;
fsp,dimm-tfaw = <0x14>;
};
};
microcode {
update@0 {
#include "microcode/m0130673325.dtsi"
};
update@1 {
#include "microcode/m0130679907.dtsi"
};
};
};
Reference in New Issue View Git Blame Copy Permalink