Release v1.3.3

Update CHANGELOG for release.

Signed-off-by: Wolfgang Denk <wd@denx.de>

CHANGELOG

@@ -1,3 +1,747 @@
+commit 16bedc661de0dae767b1377d8413373a3fbcfa79
+Author: Stefan Roese <sr@denx.de>
+Date:	Mon May 19 07:14:38 2008 +0200
+
+    ppc4xx: Canyonlands: Disable PCIe0/SATA in dev-tree depending on selection
+
+    When SATA is selected (via jumper J6) we need to disable the first PCIe
+    node in the device tree, so that Linux doesn't initialize it. Otherwise
+    the Linux SATA driver will fail to detect the devices.
+
+    The same goes the other way around too. So if PCIe is selected we need
+    to disable the SATA node in the device tree.
+
+    This is because PCIe port 0 and SATA on 460EX share the same pins
+    (multiplexed) and we have to configure in U-Boot which peripheral is
+    enabled.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3cc27b426aeefe2930f911692e9df3143fb2565f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 18 19:09:58 2008 +0200
+
+    i386: Fix multiple definitions of __show_boot_progress
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 311f3446930c1e64c12026c1cfd00500b05be52d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 18 19:09:57 2008 +0200
+
+    sc530_spunk: add missing SOBJS entry
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a559317143b4f95927b08cd388707e6f077e95fa
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 18 19:09:56 2008 +0200
+
+    sc520_spunk: Fix flash
+
+    flash.c:593: warning: dereferencing type-punned pointer will break strict-aliasing rules
+    flash.c:398: error: label at end of compound statement
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 91f221317af64191ee8caf303ea9305943158691
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 18 19:09:49 2008 +0200
+
+    drivers/pcmcia: add missing i82365
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dd223944132f97ffa52977ea95e5a52428f5cc2f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 18 19:09:47 2008 +0200
+
+    i386/bootm: remove unused var
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a9da341df19b32ad2ecb58ce529f7e4fada7814e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 18 19:09:45 2008 +0200
+
+    example/gitignore: update with all generated examples
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a38dc3ea8614f8b0c41e432b445a9959b9711295
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Thu May 15 00:42:45 2008 +0200
+
+    TQM8272: fix out-of-tree building
+
+    ...and add to MAKEALL script
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 4f805c1e3a60b9263da8ec3bcd1f45edcefa7dcf
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed May 14 23:34:53 2008 +0200
+
+    environment: fix bug introduced by commit a8409f4f1ac8
+
+    env_get_char is not a function, but a pointer to one.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cda2a4a9961fd4341b7db305cb22fc05957e8b77
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed May 14 13:55:30 2008 +0200
+
+    Fix config files for out-of-tree building
+
+    Several board/<...>/config.mk files include dynamically built (by
+    the Makefile) config files but used the wrong file name of
+	$(TOPDIR)/board/$(BOARDDIR)/config.tmp
+    instead if the correct
+	$(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+    The bug is nasty because the build result is correct for the (normal)
+    in-tree builds, and because 'sinclude' is used no errors get raised
+    even for out-of-tree build tests. But out-of-tree builds use an
+    incomplete and thus usually incorrect configuration...
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2dd7082e06d580404010b06fe4e0e8b7038a00c8
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed May 14 13:40:03 2008 +0200
+
+    ppc4xx: Fix bogus Canyonlands config.mk
+
+    This patch fixes the canyonlands config.mk file to enable correct
+    out-of-tree builds. Thanks to Wolfgang Denk for spotting this.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit fdd1247a66d788a3446244f6fde9955a93c26322
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed May 14 10:32:32 2008 +0200
+
+    ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
+
+    Canyonlands has a file ddr2_fixed.c which needs special treatment when
+    building in separate directory. It has to be linked to build directory
+    otherwise it is not seen.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a8409f4f1ac84c36273c1a1e341189662521bcfb
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed May 14 12:22:49 2008 +0200
+
+    environment: cleanup prototype declarations of env functions.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cf39b07948015c480b72a6e732cf7d839aa93a9e
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Wed May 14 12:21:48 2008 +0200
+
+    linkstation_HGLAN: Fix out of tree building.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 085551c05ca09e6c491ea11a1c6727a36776a545
+Author: Stefan Roese <sr@denx.de>
+Date:	Wed May 14 10:32:32 2008 +0200
+
+    ppc4xx: Individual handling of ddr2_fixed.c for canyonlands_nand build
+
+    Canyonlands has a file ddr2_fixed.c which needs special treatment when
+    building in separate directory. It has to be linked to build directory
+    otherwise it is not seen.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 1510b82d50615f344e89d42533e8224cce067dc0
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Tue May 13 23:15:52 2008 +0200
+
+    Makefile: fix "error: version_autogenerated.h: No such file or directory"
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 70fab1908fc1734a403711eaabbef546bc4b77dc
+Author: Stefan Roese <sr@denx.de>
+Date:	Tue May 13 20:22:01 2008 +0200
+
+    ppc4xx: Add 405EX(r) revision C PVR definitions and detection code
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 65dcfa79204f4750b905a173a5365e0b2eb6c2f6
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon May 12 01:11:21 2008 +0200
+
+    Revert "pci: Add CONFIG_PCI_SKIP_HOST_BRIDGE config option"
+
+    This reverts commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2
+    which broke many PowerPC boards.
+
+commit ee0cfa70803a3e629ea581a9b216f8ecef402bfc
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon May 12 00:56:28 2008 +0200
+
+    Revert "Avoid initrd and logbuffer area overlaps"
+
+    This reverts commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
+    which breaks building on all PPC boards that don't use a log buffer.
+
+commit 02b9b22446e3d7ad6a6382be17a1ce79a7de589b
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Sat May 10 14:02:04 2008 -0700
+
+    Fix offset calculation for multi-type legacy images.
+
+    Calculation of tail was incorrect when size % 4 == 0.
+
+    New code removes the conditional and does the same thing but with arithmetic
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+
+commit c9dca3c3f37d2647aec4509b24b16d15882ae3e4
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon May 12 00:40:58 2008 +0200
+
+    Revert "Change env_get_char from a global function ptr to a function."
+
+    This reverts commit c0559be371b2a64b1a817088c3308688e2182f93
+    which is known to break booting from dataflash and NAND.
+
+commit 20e5ed137483823aaea5178169f3b144c7a4d9e0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 11 23:13:57 2008 +0200
+
+    API: remove duplicate syscall check
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 79dd1712689d6a5031d7cbff54957049680751c7
+Author: Markus Klotzbücher <mk@denx.de>
+Date:	Thu May 8 16:00:55 2008 +0200
+
+    ppc4xx: Kilauea: Add CONFIG_BOOTP_SUBNETMASK to Kilauea board config
+
+    When using dhcp/bootp the "netmask" environment variable is not set
+    because CONFIG_BOOTP_SUBNETMASK is not defined. But usually this is
+    desireable, so the following patch adds this this option to the board
+    config.
+
+    Signed-off-by: Markus Klotzbuecher <mk@denx.de>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 869d14b4cc2e47de2ddcb117bad0407a44436684
+Author: Stefan Roese <sr@denx.de>
+Date:	Sat May 10 10:30:36 2008 +0200
+
+    ppc4xx: Update Makalu defconfig to use device-tree booting as default
+
+    This patch reworks the default environment on Makalu. Now "net_nfs" for
+    example uses the device-tree style booting formerly know as "net_nfs_fdt".
+    Also the addresses in RAM were changed because of the new image booting
+    support, which check for image overwriting. So the addresses needed to
+    get adjusted.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit f3612a7b199cab3942f60d9c1392eb39d58cc699
+Author: Becky Bruce <bgill@freescale.com>
+Date:	Wed May 7 13:28:16 2008 -0500
+
+    PPC: fix map_physmem build warning
+
+    map_physmem currently generates a warning when CONFIG_PHYS_64BIT is
+    enabled.  This quiets the warning.
+
+    Signed-off-by: Becky Bruce <Becky.Bruce@freescale.com>
+
+commit 36f32675f40292002ee1fed252c180a43022d2d4
+Author: Becky Bruce <bgill@freescale.com>
+Date:	Wed May 7 13:24:57 2008 -0500
+
+    Update pci code to use phys_addr_t
+
+    Physical addrs need to be represented by phys_addr_t, not
+    unsigned long.  Otherwise, systems that use CONFIG_PHYS_64BIT
+    are going to fail mightily.
+
+    Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
+
+commit 91a616741fc128cdb88f39bddcd4d72fe17466d0
+Author: Nick Spence <nick.spence@freescale.com>
+Date:	Thu May 8 22:32:22 2008 -0700
+
+    Support legacy multi-type images without FDT section.
+
+    This patch enables legacy multi-type images containing only a Linux kernel
+    and root file system to be loaded, maintaining compatibility with previous
+    versions of u-boot.
+
+    This is required when using old image files such as a Linux 2.4 kernel /
+    filesystem.
+
+    Signed-off-by: Nick Spence <nick.spence@freescale.com>
+    Acked-by: Bartlomiej Sieka <tur@semihalf.com>
+
+commit 881031d9732783b7aeae2198fc7eb480ae8974a6
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat May 10 00:38:02 2008 +0200
+
+    Update CHANGELOG.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e5e9d6c9c08160be7e5a36e04d125ccce99b8774
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sat May 10 00:36:09 2008 +0200
+
+    post/cpu/ppc4xx/Makefile: line length cleanup
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit cce9cfdabcf416ecd2aacc3681c91e5378c75a3d
+Author: Stelian Pop <stelian@popies.net>
+Date:	Thu May 8 22:52:09 2008 +0200
+
+    Fix @ -> <at> substitution
+
+    When applying the AT91CAP9 patches upstream, something transformed
+    the '@' character into the ' <at> ' sequence.
+
+    The patch below restores the original form in all the places where
+    it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
+    were copied from AT91CAP9, and a couple of other files where the
+    ' <at> ' sequence was present).
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 9606b3c81b3c47a1d58514e9a232c6f461a17597
+Author: Stelian Pop <stelian@popies.net>
+Date:	Thu May 8 22:52:10 2008 +0200
+
+    Update origin and copyright information in arch-at91sam9 header files
+
+    When doing the AT91CAP9/AT91SAM9 port, a number of header files were
+    copied from the Linux kernel sources. This patch explicitly specifies
+    this origin for all the copied headers, and for those missing copyright
+    information, adds it.
+
+    Additionaly, the header file 'at91sam926x_mc.h' has been superceeded
+    in the latest kernel sources by 'at91sam9_smc.h'.
+
+    The copyright information has been confirmed by the AT91 Linux kernel
+    maintainer, Andrew Victor <avictor.za@gmail.com>.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit ceb6b4fbe1dcc40bb672ef8133ddf4813e97cbb1
+Author: Stelian Pop <stelian@popies.net>
+Date:	Thu May 8 22:52:11 2008 +0200
+
+    Add copyright information in Atmel boards partition.c
+
+    When Ulf did the dataflash.c cleanup, he didn't add his copyright on
+    the new created files. This patch fixes the problem.
+
+    Signed-off-by: Stelian Pop <stelian@popies.net>
+
+commit 2ab02fd456d8ef92ae9f5439618d1fa7ca16e5f3
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date:	Thu May 8 10:09:27 2008 +0200
+
+    mx31ads: fix 32kHz clock handling
+
+    According to schematics and to RedBoot sources, the MX31ADS uses a 32768Hz
+    oscillator as a SKIL source. Fix previously wrongly assumed 32000Hz value.
+    Also fix a typo when verifying a jumper configuration. While at it, make
+    two needlessly global functions static.
+
+    Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 1b5605ca57fbb364f4d78eeee28b974ed875e888
+Author: Marian Balakowicz <m8@semihalf.com>
+Date:	Wed May 7 13:10:04 2008 +0200
+
+    Avoid initrd and logbuffer area overlaps
+
+    Add logbuffer to reserved LMB areas to prevent initrd allocation
+    from overlaping with it.
+
+    Make sure to use correct logbuffer base address.
+
+    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit c59518e15949b3403df5c5b0c2c48ea0e5bea24b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date:	Wed May 7 13:08:54 2008 +0200
+
+    ppc: Cleanup get_effective_memsize() use
+
+    Removed duplicated effective memory size calculation code.
+
+    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit 273c37d843d5b581090378016cd12dd9c586907b
+Author: Marian Balakowicz <m8@semihalf.com>
+Date:	Wed May 7 09:03:53 2008 +0200
+
+    Fix build errors when CONFIG_LOGBUFFER and CONFIG_FIT are enabled
+
+    Recent modifcations to LOGBUFFER handling code were incorrecly
+    introduced to fit_check_kernel() routine during
+    "Merge branch 'new-image' of git://www.denx.de/git/u-boot-testing",
+    commit 27f33e9f45ef7f9685cbdc65066a1828e85dde4f.
+
+    This patch cleans up this merge issue.
+
+    Signed-off-by: Marian Balakowicz <m8@semihalf.com>
+
+commit bc11756daff89a3de09ca80adac962b88cf06e6e
+Author: Grant Erickson <gerickson@nuovations.com>
+Date:	Tue May 6 20:16:15 2008 -0700
+
+    Propagate Error Status to the Shell on fw_printenv Errors
+
+    Changed implementation such that fw_printenv returns failure status
+    when one or more specified variables do not exist or when incorrect
+    command syntax is used.
+
+    This aids scripting fw_printenv such that the script can key of the
+    return status rather than relying on standard error "scraping".
+
+    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f3b6d528e4dd719640a4bfcd954f4e4c7f5db0d6
+Author: Grant Erickson <gerickson@nuovations.com>
+Date:	Tue May 6 16:18:00 2008 -0700
+
+    Fix Compilation Errors with 'tools/env/fw_printenv'
+
+    In the current top-of-tree, 1.3.3.-rc2, the optional tool
+    'tools/env/fw_printenv' fails to compile for two reasons:
+
+    1) The header watchdog.h cannot be found.
+    2) The header zlib.h is picked up from the tool chain rather than the
+       project causing a prototype conflict for crc32.
+
+    This patch addresses both of these issues.
+
+    Platforms Tested On:
+    - AMCC "Kilauea"
+
+    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+
+commit 597f6c26a18b389903a64692bacbf9a1ca69355b
+Author: James Yang <James.Yang@freescale.com>
+Date:	Mon May 5 10:22:53 2008 -0500
+
+    Fix readline_into_buffer() with CONFIG_CMDLINE_EDITING before relocating
+
+    When CONFIG_CMDLINE_EDITING is enabled, readline_into_buffer() doesn't
+    work before relocating to RAM because command history is written into
+    a global array that is not writable before relocation.  This patch
+    defers to the no-editing and no-history code in readline_into_buffer()
+    if it is called before relocation.
+
+    Signed-off-by: James Yang <James.Yang@freescale.com>
+    Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 726c0f1e5f108dccea052965123b95837d2bd402
+Author: Detlev Zundel <dzu@denx.de>
+Date:	Mon May 5 16:11:22 2008 +0200
+
+    cosmetic: Adjust coding style for switch statements to be consistent
+
+    Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 574b319512b13e10800f0045e39b993f4ca25e42
+Author: Detlev Zundel <dzu@denx.de>
+Date:	Mon May 5 16:11:21 2008 +0200
+
+    Fix disk type output in disk/part.c
+
+    Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 045b4d2d7168ef09c7349dcf6ecebe7432b74171
+Author: Vlad Lungu <vlad.lungu@windriver.com>
+Date:	Mon May 5 14:20:03 2008 +0300
+
+    Mail address change, documentation modified
+
+    Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
+
+commit 4d49b28038e2819088e8356a77212fc95a89ce5a
+Author: Michal Simek <monstr@monstr.eu>
+Date:	Sun May 4 15:42:41 2008 +0200
+
+    microblaze: Repare intc handling
+
+    Signed-off-by: Michal Simek <monstr@monstr.eu>
+
+commit 878b3b1e193e570caf3e96ad8e31e561f68d0287
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date:	Sun May 4 15:17:52 2008 +0200
+
+    include/gitignore: update to all architectures
+
+    Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1df368aed3b8bc240fe1595d290b0e91b22961da
+Author: Marcel Ziswiler <marcel@ziswiler.com>
+Date:	Mon May 5 02:12:06 2008 +0200
+
+    ide: Remove spurious second include of io.h
+
+    Removed the second include, with all the #ifdef around as suggested by Wolfgang.
+
+    Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
+
+commit 8fbc985bdad09b23b7eb4df1d2ea589619d8db4c
+Author: Adrian Filipi <adrian.filipi@eurotech.com>
+Date:	Tue May 6 16:46:37 2008 -0400
+
+    Fix some typos
+
+    This patch fixes three typos.
+    The first is a repetition of CONFIG_CMD_BSP.
+    The second makes the #endif comment match its #if.
+    The third is a spelling error.
+
+    Signed-off-by: Adrian Filipi <adrian.filipi@eurotech.com>
+
+commit e419e12d04ae3b280c99a87a2ea4ad7a40628bcb
+Author: Grant Erickson <gerickson@nuovations.com>
+Date:	Sun May 4 16:45:01 2008 -0700
+
+    Recognize 'powerpc' As an Alias for IH_ARCH_PPC
+
+    Add support for the recognition of 'powerpc' as an alias for the PowerPC
+    architecture type since Linux is already trending in that direction,
+    preferring 'powerpc' to 'ppc'.
+
+    Signed-off-by: Grant Erickson <gerickson@nuovations.com>
+
+commit f5a24259190c388c2527bdc49fee34577d862cc7
+Author: Wheatley Travis <Travis.Wheatley@freescale.com>
+Date:	Fri May 2 13:35:15 2008 -0700
+
+    7450 and 86xx L2 cache invalidate bug corrections
+
+    The 7610 and related parts have an L2IP bit in the L2CR that is
+    monitored to signal when the L2 cache invalidate is complete whereas the
+    7450 and related parts utilize L2I for this purpose. However, the
+    current code does not account for this difference. Additionally the 86xx
+    L2 cache invalidate code used an "andi" instruction where an "andis"
+    instruction should have been used.
+
+    This patch addresses both of these bugs.
+
+    Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
+    Acked-By: Jon Loeliger <jdl@freescale.com>
+
+commit 4d31cdc45d3592a5545a649fb5a24b458a4e4b72
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Fri May 9 10:16:13 2008 +0200
+
+    Avoid infinite loop "Generating include/autoconf.mk"
+
+    Fix a bogus circular dependency that caused an infinite loop of
+    "Generating include/autoconf.mk" again and again.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ef2642625cbfb1c3695e3478d08ae515052a4950
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu May 8 11:10:46 2008 +0200
+
+    ppc4xx: Kilauea: Fix incorrect FPGA FIFO address
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a00eccfebc954ad9485161efeca7d9aaf626d530
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu May 8 11:05:15 2008 +0200
+
+    ppc4xx: Add fdt support to all remaining AMCC PPC4xx eval boards
+
+    This patch adds fdt (flattened device tree) support to all remaining AMCC
+    eval boards. Most newer boards already support device tree. With this patch,
+    all AMCC boards now enable device tree passing from U-Boot to Linux
+    arch/powerpc kernels.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cb5d88b9611e0c35c53543ad3b4ab99fa82203e3
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu May 8 11:01:09 2008 +0200
+
+    ppc4xx: Add weak default ft_board_setup() routine
+
+    This patch adds a default ft_board_setup() routine to the 4xx fdt code.
+    This routine is defined as weak and can be overwritten by a board specific
+    one if needed.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit d1c1ba85c7915053adf6a8d14a08ac6fcb750d01
+Author: Stefan Roese <sr@denx.de>
+Date:	Thu May 8 10:48:58 2008 +0200
+
+    ppc4xx: acadia: Add fdt support and fix section overlap problem
+
+    This patch adds fdt (flattened device tree) support to the AMCC
+    Acadia eval board. This increases the image size and it doesn't
+    fit anymore into 256kByte. Since we didn't want to remove features
+    from the configuration, we decided to increase the U-Boot image size
+    (add one flash sector).
+
+    Also changed the default environment definition to make it
+    independent of such changes.
+
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4adb3023de75bc150f088c8935db340930ad38c8
+Author: Ira Snyder <iws@ovro.caltech.edu>
+Date:	Tue Apr 29 11:18:54 2008 -0700
+
+    ppc4xx: Add device tree support to AMCC Yosemite
+
+    Add support for booting with a device tree blob. This is needed to boot
+    ARCH=powerpc kernels. Also add support for setting the eth0 mac address
+    via the ethaddr variable.
+
+    Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit b9bbefce1a653ea35f74a66ec117cdda2e043a4b
+Author: Dave Mitchell <dmitchell@amcc.com>
+Date:	Wed May 7 09:00:23 2008 -0700
+
+    ppc4xx: Fix typos in 460GT/EX FBDV array
+
+    Corrected two typos in the 460GT/EX FBDV array.
+
+    Signed-off-by: Dave Mitchell <dmitchell@amcc.com>
+    Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 66f5fa9263629271edc86178b1f224e3c9aab2b3
+Author: Andy Fleming <afleming@freescale.com>
+Date:	Wed May 7 16:54:31 2008 -0500
+
+    85xx: Limit CPU2 workaround to parts that have the errata
+
+    Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
+    Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit a5fe514e8ace564300d2c1d73846ddff49654243
+Author: Lee Nipper <lee.nipper@freescale.com>
+Date:	Fri Apr 25 15:44:45 2008 -0500
+
+    mpc83xx: system performance settings for MPC8349EMDS.
+
+    These same settings are used on MPC8349ITX, and
+    improve performance on MPC8349EMDS.
+
+    Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
+    Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 49387dba910e485640b575e920ee463b7e611dc3
+Author: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+Date:	Tue May 6 13:22:52 2008 +0900
+
+    [MIPS] cpu/mips/cache.S: Fix build warning
+
+    Some old GNU assemblers, such as v2.14 (ELDK 3.1.1), v2.16 (ELDK 4.1.0),
+    warns illegal global symbol references by bal (and jal also) instruction.
+    This does not happen with the latest binutils v2.18.
+
+    Here's an example on gth2_config:
+
+    mips_4KC-gcc  -D__ASSEMBLY__ -g  -Os   -D__KERNEL__ -DTEXT_BASE=0x90000000 -I/home/skuribay/devel/u-boot.git/include -fno-builtin -ffreestanding -nostdinc -isy
+    stem /opt/eldk311/usr/bin/../lib/gcc-lib/mips-linux/3.3.3/include -pipe  -DCONFIG_MIPS -D__MIPS__ -G 0 -mabicalls -fpic -pipe -msoft-float -march=4kc -mtune=4k
+    c -EB -c -o cache.o cache.S
+    cache.S: Assembler messages:
+    cache.S:243: Warning: Pretending global symbol used as branch target is local.
+    cache.S:250: Warning: Pretending global symbol used as branch target is local.
+
+    In principle, gas might be sensitive to global symbol references in PIC
+    code because they should be processed through GOT (global offset table).
+    But if `bal' instruction is used, it results in PC-based offset jump.
+    This is the cause of this warning.
+
+    In practice, we know it doesn't matter whether PC-based reference or GOT-
+    based. As for this case, both will work before/after relocation. But let's
+    fix the code.
+
+    This patch explicitly sets up a target address, then jump there.
+    Here's an example of disassembled code with/without this patch.
+
+     90000668:	     1485ffef	     bne     a0,a1,90000628 <mips_cache_reset+0x20>
+     9000066c:	     ac80fffc	     sw      zero,-4(a0)
+     90000670:	     01402821	     move    a1,t2
+    -90000674:	     0411ffba	     bal     90000560 <mips_init_icache>
+    -90000678:	     01803021	     move    a2,t4
+    -9000067c:	     01602821	     move    a1,t3
+    -90000680:	     0411ffcc	     bal     900005b4 <mips_init_dcache>
+    -90000684:	     01a03021	     move    a2,t5
+    -90000688:	     03000008	     jr      t8
+    -9000068c:	     00000000	     nop
+    +90000674:	     01803021	     move    a2,t4
+    +90000678:	     8f8f83ec	     lw      t7,-31764(gp)
+    +9000067c:	     01e0f809	     jalr    t7
+    +90000680:	     00000000	     nop
+    +90000684:	     01602821	     move    a1,t3
+    +90000688:	     01a03021	     move    a2,t5
+    +9000068c:	     8f8f81e0	     lw      t7,-32288(gp)
+    +90000690:	     01e0f809	     jalr    t7
+    +90000694:	     00000000	     nop
+    +90000698:	     03000008	     jr      t8
+    +9000069c:	     00000000	     nop
+
+    Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+
+commit 0f8c62a14b523c56874ebcb67c1a16c99aad48b3
+Author: Vlad Lungu <vlad.lungu@windriver.com>
+Date:	Mon May 5 14:04:00 2008 +0300
+
+    Allow building mips versions with ELDK 3.1.1
+
+    .gpword works only with local symbols on certain binutils versions
+
+    Signed-off-by: Vlad Lungu <vlad.lungu@windrvier.com>
+
+commit 12a67a9e51f6b3ec26cb0f077fb5685a447c359d
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Mon May 5 12:52:36 2008 +0200
+
+    MAKEALL: add inka4x0 board
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit b83dcc13ae7b2dab394bfef6f699750d11490ee2
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun May 4 21:34:23 2008 +0200
+
+    kb9202 board: fix build problem.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6adf61dc4cb5c53a2df990cbc8df2bceacbfd869
+Author: Wolfgang Denk <wd@denx.de>
+Date:	Sun May 4 12:10:33 2008 +0200
+
+    Prepare for v1.3.3-rc3
+
+    Update ChNAGELOG, minor white space cleanup.
+
+    Signed-off-by: Wolfgang Denk <wd@denx.de>
+
 commit 7c0773fde6100b61be2558cb5d8c442a3194aecb
 Author: Wolfgang Denk <wd@denx.de>
 Date:	Sun May 4 00:35:15 2008 +0200

MAINTAINERS

@@ -607,7 +607,7 @@ Thomas Lange <thomas@corelatus.se>
 	dbau1x00		MIPS32 Au1000
 	gth2			MIPS32 Au1000
 
-Vlad Lungu <vlad@comsys.ro>
+Vlad Lungu <vlad.lungu@windriver.com>
 	qemu_mips		MIPS32
 
 #########################################################################

MAKEALL

@@ -42,6 +42,7 @@ LIST_5xxx="		\
 	fo300		\
 	icecube_5100	\
 	icecube_5200	\
+	inka4x0		\
 	lite5200b	\
 	mcc200		\
 	mecp5200	\
@@ -305,6 +306,7 @@ LIST_8260="		\
 	TQM8260_AC	\
 	TQM8260_AD	\
 	TQM8260_AE	\
+	TQM8272		\
 	ZPC1900		\
 "
 

Makefile

@@ -24,7 +24,7 @@
 VERSION = 1
 PATCHLEVEL = 3
 SUBLEVEL = 3
-EXTRAVERSION = -rc3
+EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 VERSION_FILE = $(obj)include/version_autogenerated.h
 
@@ -424,13 +424,19 @@ $(obj)System.map:	$(obj)u-boot
 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
 # the dep file is only include in this top level makefile to determine when
 # to regenerate the autoconf.mk file.
-$(obj)include/autoconf.mk: $(obj)include/config.h $(VERSION_FILE)
-	@$(XECHO) Generating include/autoconf.mk ; \
+$(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h
+	@$(XECHO) Generating $@ ; \
 	set -e ; \
 	: Generate the dependancies ; \
-	$(CC) -x c -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep ; \
+	$(CC) -x c -DDO_DEPS_ONLY -M $(HOST_CFLAGS) $(CPPFLAGS) \
+		-MQ $(obj)include/autoconf.mk include/common.h > $@
+
+$(obj)include/autoconf.mk: $(obj)include/config.h
+	@$(XECHO) Generating $@ ; \
+	set -e ; \
 	: Extract the config macros ; \
-	$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed > $@
+	$(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \
+		sed -n -f tools/scripts/define2mk.sed > $@
 
 sinclude $(obj)include/autoconf.mk.dep
 

README

@@ -623,7 +623,6 @@ The following options need to be configured:
 		CONFIG_CMD_SPI		* SPI serial bus support
 		CONFIG_CMD_USB		* USB support
 		CONFIG_CMD_VFD		* VFD support (TRAB)
-		CONFIG_CMD_BSP		* Board SPecific functions
 		CONFIG_CMD_CDP		* Cisco Discover Protocol support
 		CONFIG_CMD_FSL		* Microblaze FSL support
 

api/api.c

@@ -30,6 +30,7 @@
 #include <command.h>
 #include <common.h>
 #include <malloc.h>
+#include <environment.h>
 #include <linux/types.h>
 #include <api_public.h>
 
@@ -40,7 +41,6 @@
 
 /* U-Boot routines needed */
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-extern uchar *env_get_addr(int);
 
 /*****************************************************************************
  *
@@ -582,7 +582,7 @@ int syscall(int call, int *retval, ...)
 	va_list	ap;
 	int rv;
 
-	if (call < 0 || call >= calls_no || calls_table[call] == NULL) {
+	if (call < 0 || call >= calls_no) {
 		debugf("invalid call #%d\n", call);
 		return 0;
 	}

board/BuS/EB+MCF-EV123/config.mk

@@ -22,7 +22,7 @@
 # MA 02111-1307 USA
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/textbase.mk
+sinclude $(OBJTREE)/board/$(BOARDDIR)/textbase.mk
 ifndef TEXT_BASE
 TEXT_BASE = 0xFE000000
 endif

board/amcc/acadia/config.mk

@@ -28,7 +28,7 @@
 sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
 ifndef TEXT_BASE
-TEXT_BASE = 0xFFFC0000
+TEXT_BASE = 0xFFF80000
 endif
 
 ifeq ($(debug),1)

board/amcc/canyonlands/canyonlands.c

@@ -476,8 +476,37 @@ void ft_board_setup(void *blob, bd_t *bd)
 	val[3] = gd->bd->bi_flashsize;
 	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
 				  val, sizeof(val), 1);
-	if (rc)
+	if (rc) {
 		printf("Unable to update property NOR mapping, err=%s\n",
 		       fdt_strerror(rc));
+	}
+
+	if (gd->board_type == BOARD_CANYONLANDS_SATA) {
+		/*
+		 * When SATA is selected we need to disable the first PCIe
+		 * node in the device tree, so that Linux doesn't initialize
+		 * it.
+		 */
+		rc = fdt_find_and_setprop(blob, "/plb/pciex@d00000000", "status",
+					  "disabled", sizeof("disabled"), 1);
+		if (rc) {
+			printf("Unable to update property status in PCIe node, err=%s\n",
+			       fdt_strerror(rc));
+		}
+	}
+
+	if (gd->board_type == BOARD_CANYONLANDS_PCIE) {
+		/*
+		 * When PCIe is selected we need to disable the SATA
+		 * node in the device tree, so that Linux doesn't initialize
+		 * it.
+		 */
+		rc = fdt_find_and_setprop(blob, "/plb/sata@bffd1000", "status",
+					  "disabled", sizeof("disabled"), 1);
+		if (rc) {
+			printf("Unable to update property status in PCIe node, err=%s\n",
+			       fdt_strerror(rc));
+		}
+	}
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/amcc/canyonlands/config.mk

@@ -24,20 +24,12 @@
 # AMCC 460EX/460GT Evaluation Board (Canyonlands) board
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
 ifndef TEXT_BASE
 TEXT_BASE = 0xFFFA0000
 endif
 
-ifeq ($(CONFIG_NAND_U_BOOT),y)
-LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
-endif
-
-ifeq ($(CONFIG_PCIBOOT_U_BOOT),y)
-LDSCRIPT = $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
-endif
-
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
 ifeq ($(debug),1)

board/amcc/kilauea/kilauea.c

@@ -230,14 +230,22 @@ int misc_init_r(void)
 	return 0;
 }
 
-int board_emac_count(void)
+static int is_405exr(void)
 {
 	u32 pvr = get_pvr();
 
+	if (pvr & 0x00000004)
+		return 0;		/* bit 2 set -> 405EX */
+
+	return 1;			/* bit 2 cleared -> 405EXr */
+}
+
+int board_emac_count(void)
+{
 	/*
 	 * 405EXr only has one EMAC interface, 405EX has two
 	 */
-	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+	if (is_405exr())
 		return 1;
 	else
 		return 2;
@@ -245,12 +253,10 @@ int board_emac_count(void)
 
 static int board_pcie_count(void)
 {
-	u32 pvr = get_pvr();
-
 	/*
 	 * 405EXr only has one EMAC interface, 405EX has two
 	 */
-	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+	if (is_405exr())
 		return 1;
 	else
 		return 2;
@@ -259,9 +265,8 @@ static int board_pcie_count(void)
 int checkboard (void)
 {
 	char *s = getenv("serial#");
-	u32 pvr = get_pvr();
 
-	if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+	if (is_405exr())
 		printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
 	else
 		printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");

board/amcc/yosemite/yosemite.c

@@ -26,6 +26,8 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <spd_sdram.h>
+#include <libfdt.h>
+#include <fdt_support.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -554,3 +556,24 @@ void board_reset(void)
 	/* give reset to BCSR */
 	*(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09;
 }
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */

board/atmel/at91cap9adk/Makefile

@@ -1,6 +1,6 @@
 #
 # (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de.
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
 # project.

board/atmel/at91cap9adk/at91cap9adk.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -25,7 +25,7 @@
 #include <common.h>
 #include <asm/arch/at91cap9.h>
 #include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>

board/atmel/at91cap9adk/led.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

board/atmel/at91cap9adk/nand.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas

board/atmel/at91cap9adk/partition.c

@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

board/atmel/at91cap9adk/u-boot.lds

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj <at> denx.de>
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

board/atmel/at91rm9200dk/partition.c

@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

board/atmel/at91sam9260ek/Makefile

@@ -1,6 +1,6 @@
 #
 # (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de.
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
 # project.

board/atmel/at91sam9260ek/at91sam9260ek.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -25,7 +25,7 @@
 #include <common.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>

board/atmel/at91sam9260ek/led.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

board/atmel/at91sam9260ek/nand.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas

board/atmel/at91sam9260ek/partition.c

@@ -1,4 +1,6 @@
 /*
+ * (C) Copyright 2008
+ * Ulf Samuelsson <ulf@atmel.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as

board/atmel/at91sam9260ek/u-boot.lds

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj <at> denx.de>
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

board/esd/mecp5200/config.mk

@@ -32,7 +32,7 @@
 #	0x00100000   boot from RAM (for testing only)
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
 ifndef TEXT_BASE
 ## Standard: boot high

board/freescale/mpc8548cds/mpc8548cds.c

@@ -59,6 +59,7 @@ int checkboard (void)
 	uint pci_slot = get_pci_slot ();
 
 	uint cpu_board_rev = get_cpu_board_revision ();
+	uint svr;
 
 	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
 		get_board_version (), pci_slot);
@@ -71,11 +72,15 @@ int checkboard (void)
 	 */
 	local_bus_init ();
 
+	svr = get_svr();
+
 	/*
 	 * Fix CPU2 errata: A core hang possible while executing a
 	 * msync instruction and a snoopable transaction from an I/O
 	 * master tagged to make quick forward progress is present.
+	 * Fixed in Silicon Rev.2.1
 	 */
+	if (!(SVR_MAJ(svr) >= 2 && SVR_MIN(svr) >= 1))
 		ecm->eebpcr |= (1 << 16);
 
 	/*

board/linkstation/Makefile

@@ -23,18 +23,21 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= lib$(BOARD).a
+LIB	= $(obj)lib$(BOARD).a
 
 OBJS	= $(BOARD).o ide.o hwctl.o avr.o
 
-$(LIB):	.depend $(OBJS) $(SOBJS)
-	$(AR) crv $@ $(OBJS) $(SOBJS)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(OBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
 
 #########################################################################
 
-.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
 
-sinclude .depend
+sinclude $(obj).depend
 
 #########################################################################

board/linkstation/config.mk

@@ -35,7 +35,7 @@
 #       0x07F00000   boot from RAM
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
 ifndef TEXT_BASE
 # For flash image - all models

board/munices/config.mk

@@ -29,7 +29,7 @@
 #	0xFFF00000   boot high (standard configuration)
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
 ifndef TEXT_BASE
 TEXT_BASE = 0xFFF00000

board/mx31ads/lowlevel_init.S

@@ -220,7 +220,7 @@ lowlevel_init:
 	mov	r1, #CS4_BASE
 	ldrh	r1, [r1, #0x2]
 	/* Is 27MHz switch set? */
-	ands	r1, r1, #0x16
+	ands	r1, r1, #0x10
 
 	/* 532-133-66.5 */
 	ldr	r0, =CCM_BASE

board/qemu-mips/README

@@ -1,4 +1,4 @@
-By Vlad Lungu vlad@comsys.ro 2007-Oct-01
+By Vlad Lungu vlad.lungu@windriver.com 2007-Oct-01
 ----------------------------------------
 Qemu is a full system emulator. See
 
@@ -9,3 +9,7 @@ Limitations & comments
 Supports the "-m mips" configuration of qemu: serial,NE2000,IDE.
 Support is big endian only for now (or at least this is what I tested).
 Derived from au1x00 with a lot of things cut out.
+
+Supports emulated flash (patch Jean-Christophe PLAGNIOL-VILLARD) with
+recent qemu versions. When using emulated flash, launch with
+-pflash <filename> and erase mips_bios.bin.

board/qemu-mips/qemu-mips.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007
- * Vlad Lungu vlad@comsys.ro
+ * Vlad Lungu vlad.lungu@windriver.com
  *
  * See file CREDITS for list of people who contributed to this
  * project.

board/sc520_cdp/sc520_cdp_asm.S

@@ -76,8 +76,8 @@ done:   movb	$0x88, %al
 	jmp 	*%ebp		     /* return to caller */
 
 
-.globl __show_boot_progress
-__show_boot_progress:
+.globl show_boot_progress
+show_boot_progress:
 	out	%al, $0x80
 	xchg	%al, %ah
 	movw	$0x680, %dx

board/sc520_spunk/Makefile

@@ -36,7 +36,7 @@ OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
 
 clean:
 	rm -f $(SOBJS) $(OBJS)

board/sc520_spunk/flash.c

@@ -33,7 +33,6 @@
 #define PROBE_BUFFER_SIZE 1024
 static unsigned char buffer[PROBE_BUFFER_SIZE];
 
-
 #define SC520_MAX_FLASH_BANKS  1
 #define SC520_FLASH_BANK0_BASE 0x38000000  /* BOOTCS */
 #define SC520_FLASH_BANKSIZE   0x8000000
@@ -62,7 +61,6 @@ flash_info_t    flash_info[SC520_MAX_FLASH_BANKS];
 /*-----------------------------------------------------------------------
  */
 
-
 static u32 _probe_flash(u32 addr, u32 bw, int il)
 {
 	u32 result=0;
@@ -180,7 +178,6 @@ static u32 _probe_flash(u32 addr, u32 bw, int il)
 		break;
 	}
 
-
 	return result;
 }
 
@@ -215,11 +212,9 @@ static int identify_flash(unsigned address, int width)
 		enable_interrupts();
 	}
 
-
 	vendor = res >> 16;
 	device = res & 0xffff;
 
-
 	return res;
 }
 
@@ -385,7 +380,6 @@ void flash_print_info(flash_info_t *info)
 		break;
 	}
 
-
 	printf("  Size: %ld MB in %d Sectors\n",
 	       info->size >> 20, info->sector_count);
 
@@ -399,13 +393,13 @@ void flash_print_info(flash_info_t *info)
 	}
 	printf ("\n");
 
-	done:
+done:
+	return;
 }
 
 /*-----------------------------------------------------------------------
  */
 
-
 static u32 _amd_erase_flash(u32 addr, u32 sector)
 {
 	unsigned elapsed;
@@ -467,7 +461,6 @@ static u32 _intel_erase_flash(u32 addr, u32 sector)
 	*(volatile u16*)(addr + sector) = 0x0020;   /* erase setup */
 	*(volatile u16*)(addr + sector) = 0x00D0;   /* erase confirm */
 
-
 	/* Wait at least 80us - let's wait 1 ms */
 	__udelay(1000);
 
@@ -486,7 +479,6 @@ static u32 _intel_erase_flash(u32 addr, u32 sector)
 	return 0;
 }
 
-
 extern int _intel_erase_flash_end;
 asm ("_intel_erase_flash_end:\n"
      ".long 0\n");
@@ -548,7 +540,6 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 		printf ("\n");
 	}
 
-
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect<=s_last; sect++) {
 
@@ -566,7 +557,6 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 				enable_interrupts();
 			}
 
-
 			if (res) {
 				printf("Erase timed out, sector %d\n", sect);
 				return res;
@@ -576,7 +566,6 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
 		}
 	}
 
-
 	return 0;
 }
 
@@ -586,11 +575,11 @@ int flash_erase(flash_info_t *info, int s_first, int s_last)
  * 1 - write timeout
  * 2 - Flash not erased
  */
-static int _amd_write_word(unsigned start, unsigned dest, unsigned data)
+static int _amd_write_word(unsigned start, unsigned dest, u16 data)
 {
-	volatile u16 *addr2 = (u16*)start;
-	volatile u16 *dest2 = (u16*)dest;
-	volatile u16 *data2 = (u16*)&data;
+	volatile u16 *addr2 = (volatile u16*)start;
+	volatile u16 *dest2 = (volatile u16*)dest;
+	volatile u16 *data2 = (volatile u16*)&data;
 	int i;
 	unsigned elapsed;
 
@@ -601,7 +590,6 @@ static int _amd_write_word(unsigned start, unsigned dest, unsigned data)
 
 	for (i = 0; i < 2; i++) {
 
-
 		addr2[0x5555] = 0x00AA;
 		addr2[0x2aaa] = 0x0055;
 		addr2[0x5555] = 0x00A0;
@@ -630,7 +618,6 @@ extern int _amd_write_word_end;
 asm ("_amd_write_word_end:\n"
      ".long 0\n");
 
-
 static int _intel_write_word(unsigned start, unsigned dest, unsigned data)
 {
 	int i;
@@ -663,14 +650,12 @@ static int _intel_write_word(unsigned start, unsigned dest, unsigned data)
 
 
 	return 0;
-
 }
 
 extern int _intel_write_word_end;
 asm ("_intel_write_word_end:\n"
      ".long 0\n");
 
-
 /*-----------------------------------------------------------------------
  * Copy memory to flash, returns:
  * 0 - OK
@@ -715,10 +700,8 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 		return 3;
 	}
 
-
 	wp = (addr & ~3);	/* get lower word aligned address */
 
-
 	/*
 	 * handle unaligned start bytes
 	 */
@@ -805,5 +788,4 @@ int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	}
 
 	return rc;
-
 }

board/sc520_spunk/sc520_spunk_asm.S

@@ -73,8 +73,8 @@ done:   movl    $0xfffefc32,%edx
 	jmp 	*%ebp		     /* return to caller */
 
 
-.globl __show_boot_progress
-__show_boot_progress:
+.globl show_boot_progress
+show_boot_progress:
 	movl    $0xfffefc32,%edx
 	xorw    $0xffff, %ax
 	movw    %ax,(%edx)

board/tqm8272/Makefile

@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2001
+# (C) Copyright 2001-2008
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -22,19 +22,26 @@
 #
 
 include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../tqm8xx/)
+endif
 
-LIB	= lib$(BOARD).a
+LIB	= $(obj)lib$(BOARD).a
 
-OBJS	= $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o
+COBJS	= $(BOARD).o ../tqm8xx/load_sernum_ethaddr.o
 
-$(LIB):	.depend $(OBJS)
-	$(AR) crv $@ $(OBJS)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
 
 #########################################################################
 
-.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
 
-sinclude .depend
+sinclude $(obj).depend
 
 #########################################################################

board/v38b/config.mk

@@ -25,7 +25,7 @@
 # MarelV38B board
 #
 
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
 TEXT_BASE = 0xFF000000
 

common/cmd_bootm.c

@@ -433,17 +433,6 @@ static int fit_check_kernel (const void *fit, int os_noffset, int verify)
 	}
 	show_boot_progress (105);
 
-#ifdef CONFIG_LOGBUFFER
-#ifndef CONFIG_ALT_LB_ADDR
-	kbd=gd->bd;
-	/* Prevent initrd from overwriting logbuffer */
-	if (initrd_high < (kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD))
-		initrd_high = kbd->bi_memsize-LOGBUFF_LEN-LOGBUFF_OVERHEAD;
-	debug ("## Logbuffer at 0x%08lX ", kbd->bi_memsize-LOGBUFF_LEN);
-#else
-	debug ("## Logbuffer at 0x%08lX ", CONFIG_ALT_LB_ADDR);
-#endif
-#endif
 	if (!fit_image_check_target_arch (fit, os_noffset)) {
 		puts ("Unsupported Architecture\n");
 		show_boot_progress (-105);

common/cmd_ide.c

@@ -52,10 +52,6 @@
 # include <status_led.h>
 #endif
 
-#ifndef __PPC__
-#include <asm/io.h>
-#endif
-
 #ifdef CONFIG_IDE_8xx_DIRECT
 DECLARE_GLOBAL_DATA_PTR;
 #endif

common/cmd_nvedit.c

@@ -68,16 +68,6 @@ DECLARE_GLOBAL_DATA_PTR;
 /************************************************************************
 ************************************************************************/
 
-/* Function that returns a pointer to a value from the environment */
-/* (Only memory version supported / needed). */
-extern uchar *env_get_addr(int);
-
-/* Function that updates CRC of the enironment */
-extern void env_crc_update (void);
-
-/************************************************************************
-************************************************************************/
-
 /*
  * Table with supported baudrates (defined in config_xyz.h)
  */

common/env_common.c

@@ -50,6 +50,7 @@ extern void env_relocate_spec (void);
 extern uchar env_get_char_spec(int);
 
 static uchar env_get_char_init (int index);
+uchar (*env_get_char)(int) = env_get_char_init;
 
 /************************************************************************
  * Default settings to be used when no valid environment is found
@@ -181,19 +182,6 @@ uchar env_get_char_memory (int index)
 }
 #endif
 
-uchar env_get_char (int index)
-{
-	uchar c;
-
-	/* if relocated to RAM */
-	if (gd->flags & GD_FLG_RELOC)
-		c = env_get_char_memory(index);
-	else
-		c = env_get_char_init(index);
-
-	return (c);
-}
-
 uchar *env_get_addr (int index)
 {
 	if (gd->env_valid) {
@@ -227,6 +215,11 @@ void env_relocate (void)
 	DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
 #endif
 
+	/*
+	 * After relocation to RAM, we can always use the "memory" functions
+	 */
+	env_get_char = env_get_char_memory;
+
 	if (gd->env_valid == 0) {
 #if defined(CONFIG_GTH)	|| defined(CFG_ENV_IS_NOWHERE)	/* Environment not changable */
 		puts ("Using default environment\n\n");

common/env_eeprom.c

@@ -38,9 +38,6 @@ env_t *env_ptr = NULL;
 
 char * env_name_spec = "EEPROM";
 
-extern uchar env_get_char_memory (int index);
-
-
 uchar env_get_char_spec (int index)
 {
 	uchar c;

common/env_nvram.c

@@ -63,8 +63,6 @@ char * env_name_spec = "NVRAM";
 extern uchar default_environment[];
 extern int default_environment_size;
 
-extern uchar env_get_char_memory (int index);
-
 #ifdef CONFIG_AMIGAONEG3SE
 uchar env_get_char_spec (int index)
 {

common/ft_build.c

@@ -396,7 +396,6 @@ void *ft_get_prop(void *bphp, const char *propname, int *szp)
 
 /********************************************************************/
 
-
 void ft_setup(void *blob, bd_t * bd, ulong initrd_start, ulong initrd_end)
 {
 	u32 *p;

common/image.c

@@ -23,7 +23,6 @@
  * MA 02111-1307 USA
  */
 
-
 #ifndef USE_HOSTCC
 #include <common.h>
 #include <watchdog.h>
@@ -36,10 +35,6 @@
 #include <dataflash.h>
 #endif
 
-#ifdef CONFIG_LOGBUFFER
-#include <logbuff.h>
-#endif
-
 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE)
 #include <rtc.h>
 #endif
@@ -93,6 +88,7 @@ static table_entry_t uimage_arch[] = {
 	{	IH_ARCH_MIPS64,		"mips64",	"MIPS 64 Bit",	},
 	{	IH_ARCH_NIOS,		"nios",		"NIOS",		},
 	{	IH_ARCH_NIOS2,		"nios2",	"NIOS II",	},
+	{	IH_ARCH_PPC,		"powerpc",	"PowerPC",	},
 	{	IH_ARCH_PPC,		"ppc",		"PowerPC",	},
 	{	IH_ARCH_S390,		"s390",		"IBM S390",	},
 	{	IH_ARCH_SH,		"sh",		"SuperH",	},
@@ -241,7 +237,7 @@ void image_multi_getimg (image_header_t *hdr, ulong idx,
 {
 	int i;
 	uint32_t *size;
-	ulong offset, tail, count, img_data;
+	ulong offset, count, img_data;
 
 	/* get number of component */
 	count = image_multi_count (hdr);
@@ -257,19 +253,15 @@ void image_multi_getimg (image_header_t *hdr, ulong idx,
 	if (idx < count) {
 		*len = uimage_to_cpu (size[idx]);
 		offset = 0;
-		tail = 0;
 
 		/* go over all indices preceding requested component idx */
 		for (i = 0; i < idx; i++) {
-			/* add up i-th component size */
-			offset += uimage_to_cpu (size[i]);
-
-			/* add up alignment for i-th component */
-			tail += (4 - uimage_to_cpu (size[i]) % 4);
+			/* add up i-th component size, rounding up to 4 bytes */
+			offset += (uimage_to_cpu (size[i]) + 3) & ~3 ;
 		}
 
 		/* calculate idx-th component data address */
-		*data = img_data + offset + tail;
+		*data = img_data + offset;
 	} else {
 		*len = 0;
 		*data = 0;

common/main.c

@@ -40,7 +40,7 @@
 
 #include <post.h>
 
-#if defined(CONFIG_SILENT_CONSOLE) || defined(CONFIG_POST)
+#if defined(CONFIG_SILENT_CONSOLE) || defined(CONFIG_POST) || defined(CONFIG_CMDLINE_EDITING)
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
@@ -67,11 +67,9 @@ static int abortboot(int);
 
 char        console_buffer[CFG_CBSIZE];		/* console I/O buffer	*/
 
-#ifndef CONFIG_CMDLINE_EDITING
 static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
 static char erase_seq[] = "\b \b";		/* erase sequence	*/
 static char   tab_seq[] = "        ";		/* used to expand TABs	*/
-#endif /* CONFIG_CMDLINE_EDITING */
 
 #ifdef CONFIG_BOOT_RETRY_TIME
 static uint64_t endtime = 0;  /* must be set, default is instant timeout */
@@ -947,11 +945,26 @@ int readline_into_buffer (const char *const prompt, char * buffer)
 		initted = 1;
 	}
 
+
+	/*
+	 * History uses a global array which is not
+	 * writable until after relocation to RAM.
+	 * Revert to non-history version if still
+	 * running from flash.
+	 */
+	if (gd->flags & GD_FLG_RELOC) {
+		if (!initted) {
+			hist_init();
+			initted = 1;
+		}
+
 		puts (prompt);
 
 		rc = cread_line(prompt, p, &len);
 		return rc < 0 ? rc : len;
-#else
+
+	} else {
+#endif	/* CONFIG_CMDLINE_EDITING */
 	char * p_buf = p;
 	int	n = 0;				/* buffer index		*/
 	int	plen = 0;			/* prompt length	*/
@@ -1047,12 +1060,13 @@ int readline_into_buffer (const char *const prompt, char * buffer)
 			}
 		}
 	}
-#endif /* CONFIG_CMDLINE_EDITING */
+#ifdef CONFIG_CMDLINE_EDITING
+	}
+#endif
 }
 
 /****************************************************************************/
 
-#ifndef CONFIG_CMDLINE_EDITING
 static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen)
 {
 	char *s;
@@ -1082,7 +1096,6 @@ static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen)
 	(*np)--;
 	return (p);
 }
-#endif /* CONFIG_CMDLINE_EDITING */
 
 /****************************************************************************/
 

cpu/74xx_7xx/cache.S

@@ -329,14 +329,28 @@ _GLOBAL(dcache_status)
 	blr
 
 /*
- * Invalidate L2 cache using L2I and polling L2IP
+ * Invalidate L2 cache using L2I and polling L2IP or L2I
  */
 _GLOBAL(l2cache_invalidate)
 	sync
+	mfspr r3, l2cr
 	oris	r3, r3, L2CR_L2I@h
 	sync
 	mtspr	l2cr, r3
 	sync
+	mfspr r3, PVR
+	sync
+	rlwinm r3, r3, 16,16,31
+	cmpli 0,r3,0x8000  /* 7451, 7441 */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8001  /* 7455, 7445 */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8002  /* 7457, 7447 */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8003  /* 7447A */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8004  /* 7448 */
+	beq 0,inv_7450
 invl2:
 	mfspr	r3, l2cr
 	andi.	r3, r3, L2CR_L2IP
@@ -348,6 +362,11 @@ invl2:
 	mtspr	l2cr, r3
 	sync
 	blr
+inv_7450:
+	mfspr	r3, l2cr
+	andis. r3, r3, L2CR_L2I@h
+	bne inv_7450
+	blr
 
 /*
  * Enable L2 cache

cpu/arm1136/mx31/generic.c

@@ -39,7 +39,7 @@ static u32 mx31_decode_pll(u32 reg, u32 infreq)
 		(mfd * pd)) << 10;
 }
 
-u32 mx31_get_mpl_dpdgck_clk(void)
+static u32 mx31_get_mpl_dpdgck_clk(void)
 {
 	u32 infreq;
 
@@ -51,7 +51,7 @@ u32 mx31_get_mpl_dpdgck_clk(void)
 	return mx31_decode_pll(__REG(CCM_MPCTL), infreq);
 }
 
-u32 mx31_get_mcu_main_clk(void)
+static u32 mx31_get_mcu_main_clk(void)
 {
 	/* For now we assume mpl_dpdgck_clk == mcu_main_clk
 	 * which should be correct for most boards

cpu/arm920t/s3c24x0/usb.c

@@ -69,4 +69,4 @@ int usb_cpu_init_fail (void)
 }
 
 # endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT) */

cpu/arm926ejs/at91sam9/Makefile

@@ -1,6 +1,6 @@
 #
 # (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd <at> denx.de.
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
 # project.

cpu/arm926ejs/at91sam9/ether.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

cpu/arm926ejs/at91sam9/lowlevel_init.S

@@ -2,7 +2,7 @@
  * AT91CAP9/SAM9 setup stuff
  *
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

cpu/arm926ejs/at91sam9/timer.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

cpu/arm926ejs/at91sam9/usb.c

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2006
- * DENX Software Engineering <mk <at> denx.de>
+ * DENX Software Engineering <mk@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

cpu/i386/start.S

@@ -55,7 +55,7 @@ early_board_init_ret:
 	/* so we try to indicate progress */
 	movw	$0x01, %ax
 	movl	$.progress0, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress0:
 
 	/* size memory */
@@ -74,7 +74,7 @@ mem_init_ret:
 	/* indicate (lack of) progress */
 	movw	$0x81, %ax
 	movl	$.progress0a, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress0a:
 	jmp 	die
 mem_ok:
@@ -82,7 +82,7 @@ mem_ok:
 	/* indicate progress */
 	movw	$0x02, %ax
 	movl	$.progress1, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress1:
 
 	/* create a stack after the bss */
@@ -104,7 +104,7 @@ no_stack:
 	/* indicate (lack of) progress */
 	movw	$0x82, %ax
 	movl	$.progress1a, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress1a:
 	jmp die
 
@@ -113,7 +113,7 @@ stack_ok:
 	/* indicate progress */
 	movw	$0x03, %ax
 	movl	$.progress2, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress2:
 
 	/* copy data section to ram, size must be 4-byte aligned */
@@ -136,7 +136,7 @@ data_fail:
 	/* indicate (lack of) progress */
 	movw	$0x83, %ax
 	movl	$.progress2a, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress2a:
 	jmp 	die
 
@@ -145,7 +145,7 @@ data_ok:
 	/* indicate progress */
 	movw	$0x04, %ax
 	movl	$.progress3, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress3:
 
 	/* clear bss section in ram, size must be 4-byte aligned  */
@@ -168,7 +168,7 @@ bss_fail:
 	/* indicate (lack of) progress */
 	movw	$0x84, %ax
 	movl	$.progress3a, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress3a:
 	jmp 	die
 
@@ -180,7 +180,7 @@ bss_ok:
 	/* indicate progress */
 	movw	$0x05, %ax
 	movl	$.progress4, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress4:
 
 	call	start_i386boot  /* Enter, U-boot! */
@@ -188,7 +188,7 @@ bss_ok:
 	/* indicate (lack of) progress */
 	movw	$0x85, %ax
 	movl	$.progress4a, %ebp
-	jmp	__show_boot_progress
+	jmp	show_boot_progress
 .progress4a:
 
 die:	hlt

cpu/mips/cache.S

@@ -240,14 +240,16 @@ NESTED(mips_cache_reset, 0, ra)
 	 */
 	move	a1, t2
 	move	a2, t4
-	bal	mips_init_icache
+	PTR_LA	t7, mips_init_icache
+	jalr	t7
 
 	/*
 	 * then initialize D-cache.
 	 */
 	move	a1, t3
 	move	a2, t5
-	bal	mips_init_dcache
+	PTR_LA	t7, mips_init_dcache
+	jalr	t7
 
 	jr	RA
 	END(mips_cache_reset)

cpu/mips/start.S

@@ -345,7 +345,8 @@ relocate_code:
 	jr	t0
 	nop
 
-	.gpword	_GLOBAL_OFFSET_TABLE_	/* _GLOBAL_OFFSET_TABLE_ - _gp	*/
+	.word 	_gp
+	.word	_GLOBAL_OFFSET_TABLE_
 	.word	uboot_end_data
 	.word	uboot_end
 	.word	num_got_entries
@@ -358,8 +359,10 @@ in_ram:
 	 * generated by GNU ld. Skip these reserved entries from relocation.
 	 */
 	lw	t3, -4(t0)	/* t3 <-- num_got_entries	*/
-	lw	t4, -16(t0)	/* t4 <-- (_GLOBAL_OFFSET_TABLE_ - _gp)	*/
-	add	t4, t4, gp	/* t4 now holds _GLOBAL_OFFSET_TABLE_	*/
+	lw	t4, -16(t0)	/* t4 <-- _GLOBAL_OFFSET_TABLE_	*/
+	lw	t5, -20(t0)	/* t5 <-- _gp	*/
+	sub	t4, t5		/* compute offset*/
+	add	t4, t4, gp	/* t4 now holds relocated _GLOBAL_OFFSET_TABLE_	*/
 	addi	t4, t4, 8	/* Skipping first two entries.	*/
 	li	t2, 2
 1:

cpu/mpc86xx/cache.S

@@ -338,7 +338,7 @@ _GLOBAL(l2cache_invalidate)
 
 invl2:
 	mfspr	r3, l2cr
-	andi.	r3, r3, L2CR_L2I@h
+	andis.	r3, r3, L2CR_L2I@h
 	bne	invl2
 	blr
 

cpu/ppc4xx/cpu.c

@@ -346,6 +346,26 @@ int checkcpu (void)
 		strcpy(addstr, "No Security support");
 		break;
 
+	case PVR_405EX1_RC:
+		puts("EX Rev. C");
+		strcpy(addstr, "Security support");
+		break;
+
+	case PVR_405EX2_RC:
+		puts("EX Rev. C");
+		strcpy(addstr, "No Security support");
+		break;
+
+	case PVR_405EXR1_RC:
+		puts("EXr Rev. C");
+		strcpy(addstr, "Security support");
+		break;
+
+	case PVR_405EXR2_RC:
+		puts("EXr Rev. C");
+		strcpy(addstr, "No Security support");
+		break;
+
 #if defined(CONFIG_440)
 	case PVR_440GP_RB:
 		puts("GP Rev. B");

cpu/ppc4xx/fdt.c

@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,7 +27,7 @@
 #include <asm/cache.h>
 #include <ppc4xx.h>
 
-#if defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 #include <libfdt.h>
 #include <libfdt_env.h>
 #include <fdt_support.h>
@@ -35,6 +35,26 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+void __ft_board_setup(void *blob, bd_t *bd)
+{
+	u32 val[4];
+	int rc;
+
+	ft_cpu_setup(blob, bd);
+
+	/* Fixup NOR mapping */
+	val[0] = 0;				/* chip select number */
+	val[1] = 0;				/* always 0 */
+	val[2] = gd->bd->bi_flashstart;
+	val[3] = gd->bd->bi_flashsize;
+	rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
+				  val, sizeof(val), 1);
+	if (rc)
+		printf("Unable to update property NOR mapping, err=%s\n",
+		       fdt_strerror(rc));
+}
+void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
+
 /*
  * Fixup all PCIe nodes by setting the device_type property
  * to "pci-endpoint" instead is "pci" for endpoint ports.
@@ -109,4 +129,4 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	 */
 	fdt_pcie_setup(blob);
 }
-#endif /* CONFIG_OF_LIBFDT */
+#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */

cpu/ppc4xx/speed.c

@@ -238,7 +238,7 @@ static u8 pll_fbdv_multi_bits[] = {
 	/* values for:  101 - 200 */
 	0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
 	0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
-	0x20, 0xc0, 0x01, 0x83, 0x77, 0xff, 0x1f, 0xbf, 0x7f, 0xfe,
+	0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
 	0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
 	0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
 	0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,

disk/part.c

@@ -109,43 +109,44 @@ void dev_print (block_dev_desc_t *dev_desc)
 	lbaint_t lba512;
 #endif
 
-	if (dev_desc->type==DEV_TYPE_UNKNOWN) {
-		puts ("not available\n");
-		return;
-	}
-	if (dev_desc->if_type==IF_TYPE_SCSI)  {
-		printf ("(%d:%d) ", dev_desc->target,dev_desc->lun);
-	}
-	if (dev_desc->if_type==IF_TYPE_IDE) {
-		printf ("Model: %s Firm: %s Ser#: %s\n",
-			dev_desc->vendor,
-			dev_desc->revision,
-			dev_desc->product);
-	}
-	if (dev_desc->if_type==IF_TYPE_SATA) {
-		printf ("Model: %s Firm: %s Ser#: %s\n",
-			dev_desc->vendor,
-			dev_desc->revision,
-			dev_desc->product);
-	} else {
-		printf ("Vendor: %s Prod.: %s Rev: %s\n",
+	switch (dev_desc->type) {
+	case IF_TYPE_SCSI:
+		printf ("(%d:%d) Vendor: %s Prod.: %s Rev: %s\n",
+			dev_desc->target,dev_desc->lun,
 			dev_desc->vendor,
 			dev_desc->product,
 			dev_desc->revision);
+		break;
+	case IF_TYPE_IDE:
+	case IF_TYPE_SATA:
+		printf ("Model: %s Firm: %s Ser#: %s\n",
+			dev_desc->vendor,
+			dev_desc->revision,
+			dev_desc->product);
+		break;
+	case DEV_TYPE_UNKNOWN:
+	default:
+		puts ("not available\n");
+		return;
 	}
 	puts ("            Type: ");
 	if (dev_desc->removable)
 		puts ("Removable ");
 	switch (dev_desc->type & 0x1F) {
-		case DEV_TYPE_HARDDISK: puts ("Hard Disk");
+	case DEV_TYPE_HARDDISK:
+		puts ("Hard Disk");
 		break;
-		case DEV_TYPE_CDROM: 	puts ("CD ROM");
+	case DEV_TYPE_CDROM:
+		puts ("CD ROM");
 		break;
-		case DEV_TYPE_OPDISK: 	puts ("Optical Device");
+	case DEV_TYPE_OPDISK:
+		puts ("Optical Device");
 		break;
-		case DEV_TYPE_TAPE: 	puts ("Tape");
+	case DEV_TYPE_TAPE:
+		puts ("Tape");
 		break;
-		default:		printf ("# %02X #", dev_desc->type & 0x1F);
+	default:
+		printf ("# %02X #", dev_desc->type & 0x1F);
 		break;
 	}
 	puts ("\n");
@@ -281,19 +282,26 @@ static void print_part_header (const char *type, block_dev_desc_t * dev_desc)
 {
 	puts ("\nPartition Map for ");
 	switch (dev_desc->if_type) {
-		case IF_TYPE_IDE:  	puts ("IDE");
+	case IF_TYPE_IDE:
+		puts ("IDE");
 		break;
-		case IF_TYPE_SATA:	puts ("SATA");
+	case IF_TYPE_SATA:
+		puts ("SATA");
 		break;
-		case IF_TYPE_SCSI: 	puts ("SCSI");
+	case IF_TYPE_SCSI:
+		puts ("SCSI");
 		break;
-		case IF_TYPE_ATAPI:	puts ("ATAPI");
+	case IF_TYPE_ATAPI:
+		puts ("ATAPI");
 		break;
-		case IF_TYPE_USB:	puts ("USB");
+	case IF_TYPE_USB:
+		puts ("USB");
 		break;
-		case IF_TYPE_DOC:	puts ("DOC");
+	case IF_TYPE_DOC:
+		puts ("DOC");
 		break;
-		default: 		puts ("UNKNOWN");
+	default:
+		puts ("UNKNOWN");
 		break;
 	}
 	printf (" device %d  --   Partition Type: %s\n\n",

doc/README.nand-boot-ppc440

@@ -9,7 +9,7 @@ The PPC440EP(x)/GR(x) cpu's can boot directly from NAND FLASH,
 completely without NOR FLASH. This can be done by using the NAND
 boot feature of the 440 NAND flash controller (NDFC).
 
-Here a short desciption of the different boot stages:
+Here a short description of the different boot stages:
 
 a) IPL (Initial Program Loader, integrated inside CPU)
 ------------------------------------------------------

drivers/net/smc911x.c

@@ -1,7 +1,7 @@
 /*
  * SMSC LAN9[12]1[567] Network driver
  *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer <at> pengutronix.de>
+ * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.

drivers/pci/pci.c

@@ -221,7 +221,7 @@ pci_dev_t pci_find_device(unsigned int vendor, unsigned int device, int index)
  */
 
 unsigned long pci_hose_phys_to_bus (struct pci_controller *hose,
-				    unsigned long phys_addr,
+				    phys_addr_t phys_addr,
 				    unsigned long flags)
 {
 	struct pci_region *res;
@@ -253,7 +253,7 @@ Done:
 	return 0;
 }
 
-unsigned long pci_hose_bus_to_phys(struct pci_controller* hose,
+phys_addr_t pci_hose_bus_to_phys(struct pci_controller* hose,
 				 unsigned long bus_addr,
 				 unsigned long flags)
 {
@@ -425,9 +425,6 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
 	     dev <  PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
 	     dev += PCI_BDF(0,0,1))
 	{
-
-	/* Bus 0 is not necessarily PCI bridge. */
-#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE)
 		/* Skip our host bridge */
 		if ( dev == PCI_BDF(hose->first_busno,0,0) ) {
 #if defined(CONFIG_PCI_CONFIG_HOST_BRIDGE)              /* don't skip host bridge */
@@ -437,11 +434,10 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
 			if (getenv("pciconfighost") == NULL) {
 				continue; /* Skip our host bridge */
 			}
-#else /* CONFIG_PCI_CONFIG_HOST_BRIDGE */
+#else
 			continue; /* Skip our host bridge */
-#endif /* CONFIG_PCI_CONFIG_HOST_BRIDGE */
+#endif
 		}
-#endif /* CONFIG_PCI_SKIP_HOST_BRIDGE */
 
 		if (PCI_FUNC(dev) && !found_multi)
 			continue;
@@ -477,11 +473,8 @@ int pci_hose_scan_bus(struct pci_controller *hose, int bus)
 				hose->fixup_irq(hose, dev);
 
 #ifdef CONFIG_PCI_SCAN_SHOW
-#if defined(CONFIG_PCI_SKIP_HOST_BRIDGE)
 			/* Skip our host bridge */
-			if ( dev != PCI_BDF(hose->first_busno,0,0) )
-#endif
-			{
+			if ( dev != PCI_BDF(hose->first_busno,0,0) ) {
 			    unsigned char int_line;
 
 			    pci_hose_read_config_byte(hose, dev, PCI_INTERRUPT_LINE,

drivers/pcmcia/Makefile

@@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB 	:= $(obj)libpcmcia.a
 
+COBJS-$(CONFIG_I82365) += i82365.o
 COBJS-y += mpc8xx_pcmcia.o
 COBJS-y += pxa_pcmcia.o
 COBJS-y += rpx_pcmcia.o

drivers/pcmcia/i82365.c

@@ -31,8 +31,6 @@
 
 #include <common.h>
 
-#ifdef CONFIG_I82365
-
 #include <command.h>
 #include <pci.h>
 #include <pcmcia.h>
@@ -1010,5 +1008,3 @@ static void i82365_dump_regions (pci_dev_t dev)
 		ide[4], ide[5], ide[6], ide[7]);
 }
 #endif	/* DEBUG */
-
-#endif /* CONFIG_I82365 */

examples/.gitignore

@@ -1,5 +1,9 @@
+/82559_eeprom
 /hello_world
 /interrupt
+/mem_to_mem_idma2intr
+/test_burst
+/timer
 /sched
 /smc91111_eeprom
 *.bin

include/.gitignore

@@ -1,7 +1,7 @@
 /autoconf.mk*
 /asm
-/asm-blackfin/arch
-/asm-ppc/arch
+/asm-*/arch
+/asm-*/proc
 /bmp_logo.h
 /config.h
 /config.mk

include/asm-arm/arch-at91sam9/at91_pio.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pio.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pio.h]
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People

include/asm-arm/arch-at91sam9/at91_pit.h

@@ -1,5 +1,8 @@
 /*
- * include/asm-arm/arch-at91/at91_pit.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pit.h]
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
  *
  * Periodic Interval Timer (PIT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.

include/asm-arm/arch-at91sam9/at91_pmc.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_pmc.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_pmc.h]
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People

include/asm-arm/arch-at91sam9/at91_rstc.h

@@ -1,5 +1,8 @@
 /*
- * include/asm-arm/arch-at91/at91_rstc.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_rstc.h]
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
  *
  * Reset Controller (RSTC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.

include/asm-arm/arch-at91sam9/at91_spi.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91_spi.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91_spi.h]
  *
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) SAN People

include/asm-arm/arch-at91sam9/at91cap9.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9.h]
  *
  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>

include/asm-arm/arch-at91sam9/at91cap9_matrix.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91cap9_matrix.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9_matrix.h]
  *
  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>

include/asm-arm/arch-at91sam9/at91sam9260.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9260.h]
  *
  * (C) 2006 Andrew Victor
  *

include/asm-arm/arch-at91sam9/at91sam9260_matrix.h

@@ -1,5 +1,7 @@
 /*
- * include/asm-arm/arch-at91/at91sam9260_matrix.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9260_matrix.h]
+ *
+ * Copyright (C) 2007 Atmel Corporation.
  *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9260 datasheet revision B.

include/asm-arm/arch-at91sam9/at91sam926x_mc.h

@@ -1,140 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91sam926x_mc.h
- *
- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM926x_MC_H
-#define AT91SAM926x_MC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		0
-#define			AT91_SDRAMC_MODE_NOP		1
-#define			AT91_SDRAMC_MODE_PRECHARGE	2
-#define			AT91_SDRAMC_MODE_LMR		3
-#define			AT91_SDRAMC_MODE_REFRESH	4
-#define			AT91_SDRAMC_MODE_EXT_LMR	5
-#define			AT91_SDRAMC_MODE_DEEP		6
-
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
-#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_1	(1 << 5)
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define			AT91_SDRAMC_CAS_3	(3 << 5)
-#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 7)
-#define			AT91_SDRAMC_DBW_16	(1 << 7)
-#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
-#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_SDRAMC_LPCB_DISABLE		0
-#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
-#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
-#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
-#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
-#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
-#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_SDRAMC_MD_SDRAM		0
-#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
-#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#endif
-
-#endif

include/asm-arm/arch-at91sam9/at91sam9_smc.h

@@ -0,0 +1,76 @@
+/*
+ * [origin: Linux kernel include/asm-arm/arch-at91/at91sam9_smc.h]
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
+#endif

include/asm-arm/arch-at91sam9/clk.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

include/asm-arm/arch-at91sam9/gpio.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/gpio.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/gpio.h]
  *
  *  Copyright (C) 2005 HP Labs
  *

include/asm-arm/arch-at91sam9/hardware.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/hardware.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/hardware.h]
  *
  *  Copyright (C) 2003 SAN People
  *  Copyright (C) 2003 ATMEL

include/asm-arm/arch-at91sam9/io.h

@@ -1,5 +1,5 @@
 /*
- * include/asm-arm/arch-at91/io.h
+ * [origin: Linux kernel include/asm-arm/arch-at91/io.h]
  *
  *  Copyright (C) 2003 SAN People
  *

include/asm-arm/arch-at91sam9/memory-map.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

include/asm-arm/arch-mx31/mx31.h

@@ -24,9 +24,7 @@
 #ifndef __ASM_ARCH_MX31_H
 #define __ASM_ARCH_MX31_H
 
-u32 mx31_get_mpl_dpdgck_clk(void);
-u32 mx31_get_mcu_main_clk(void);
-u32 mx31_get_ipg_clk(void);
-void mx31_gpio_mux(unsigned long mode);
+extern u32 mx31_get_ipg_clk(void);
+extern void mx31_gpio_mux(unsigned long mode);
 
 #endif /* __ASM_ARCH_MX31_H */

include/asm-arm/dma-mapping.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * See file CREDITS for list of people who contributed to this

include/asm-ppc/io.h

@@ -251,7 +251,7 @@ extern inline void out_be32(volatile unsigned __iomem *addr, int val)
 static inline void *
 map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
 {
-	return (void *)paddr;
+	return (void *)((unsigned long)paddr);
 }
 
 /*

include/asm-ppc/processor.h

@@ -772,10 +772,14 @@
 #define PVR_405EP_RA	0x51210950
 #define PVR_405GPR_RB	0x50910951
 #define PVR_405EZ_RA	0x41511460
-#define PVR_405EXR1_RA	0x12911473 /* 405EXr rev A with Security */
-#define PVR_405EXR2_RA	0x12911471 /* 405EXr rev A without Security */
-#define PVR_405EX1_RA	0x12911477 /* 405EX rev A with Security */
-#define PVR_405EX2_RA	0x12911475 /* 405EX rev A without Security */
+#define PVR_405EXR1_RA	0x12911473 /* 405EXr rev A/B with Security */
+#define PVR_405EXR2_RA	0x12911471 /* 405EXr rev A/B without Security */
+#define PVR_405EX1_RA	0x12911477 /* 405EX rev A/B with Security */
+#define PVR_405EX2_RA	0x12911475 /* 405EX rev A/B without Security */
+#define PVR_405EXR1_RC	0x1291147B /* 405EXr rev C with Security */
+#define PVR_405EXR2_RC	0x12911479 /* 405EXr rev C without Security */
+#define PVR_405EX1_RC	0x1291147F /* 405EX rev C with Security */
+#define PVR_405EX2_RC	0x1291147D /* 405EX rev C without Security */
 #define PVR_440GP_RB	0x40120440
 #define PVR_440GP_RC	0x40120481
 #define PVR_440EP_RA	0x42221850

include/common.h

@@ -227,7 +227,6 @@ extern ulong load_addr;		/* Default Load Address */
 /* common/cmd_nvedit.c */
 int	env_init     (void);
 void	env_relocate (void);
-uchar	env_get_char (int);
 int	envmatch     (uchar *, int);
 char	*getenv	     (char *);
 int	getenv_r     (char *name, char *buf, unsigned len);

include/configs/MPC8349EMDS.h

@@ -602,6 +602,16 @@
 	HRCWH_TSEC2M_IN_GMII )
 #endif
 
+/*
+ * System performance
+ */
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+
 /* System IO Config */
 #define CFG_SICRH SICRH_TSOBI1
 #define CFG_SICRL SICRL_LDP_A

include/configs/acadia.h

@@ -59,16 +59,16 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(256 * 1024)/* Reserve 256 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(512 * 1024)/* Reserve 512 kB for malloc()	*/
-
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0xfe000000
-#define CFG_MONITOR_BASE	TEXT_BASE
 #define CFG_CPLD_BASE		0x80000000
 #define CFG_NAND_ADDR		0xd0000000
 #define CFG_USB_HOST		0xef603000	/* USB OHCI 1.1 controller	*/
 
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(0xFFFFFFFF - CFG_MONITOR_BASE + 1)
+#define CFG_MALLOC_LEN		(512 * 1024)/* Reserve 512 kB for malloc()	*/
+
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer
  *----------------------------------------------------------------------*/
@@ -237,6 +237,7 @@
 #define	CONFIG_PHY_ADDR		0	/* PHY address			*/
 #define CONFIG_NET_MULTI	1
 #define CFG_RX_ETH_BUFFER	16	/* # of rx buffers & descriptors*/
+#define CONFIG_HAS_ETH0		1
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
@@ -246,6 +247,9 @@
 
 #undef	CONFIG_BOOTARGS
 
+#define xstr(s) str(s)
+#define str(s) #s
+
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"hostname=acadia\0"						\
@@ -268,8 +272,9 @@
 	"ramdisk_addr=fff20000\0"					\
 	"initrd_high=30000000\0"					\
 	"load=tftp 200000 acadia/u-boot.bin\0"				\
-	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
-		"cp.b ${fileaddr} fffc0000 ${filesize};"		\
+	"update=protect off " xstr(CFG_MONITOR_BASE) " FFFFFFFF;"	\
+		"era " xstr(CFG_MONITOR_BASE) " FFFFFFFF;"		\
+		"cp.b ${fileaddr} " xstr(CFG_MONITOR_BASE) " ${filesize};" \
 		"setenv filesize;saveenv\0"				\
 	"upd=run load update\0"						\
 	"nload=tftp 200000 acadia/u-boot-nand.bin\0"			\
@@ -501,4 +506,8 @@
   #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */

include/configs/at91cap9adk.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91CAP9ADK board.

include/configs/at91sam9260ek.h

@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop <at> leadtechdesign.com>
+ * Stelian Pop <stelian.pop@leadtechdesign.com>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * Configuation settings for the AT91SAM9260EK board.

include/configs/bamboo.h

@@ -291,6 +291,7 @@
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
+#define CONFIG_HAS_ETH0
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address, See schematics	*/
 #define CONFIG_PHY1_ADDR        1
@@ -426,4 +427,9 @@
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */

include/configs/bubinga.h

@@ -128,6 +128,7 @@
 
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define	CONFIG_PHY_ADDR		1	/* PHY address			*/
+#define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	2	/* EMAC1 PHY address		*/
 #define CONFIG_NET_MULTI	1
@@ -435,4 +436,8 @@
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
 
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */

include/configs/ebony.h

@@ -201,6 +201,7 @@
 
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		8	/* PHY address			*/
+#define CONFIG_HAS_ETH0
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR	9	/* EMAC1 PHY address		*/
 #define CONFIG_NET_MULTI	1
@@ -306,4 +307,9 @@
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT	1
+#define CONFIG_OF_BOARD_SETUP	1
+
 #endif	/* __CONFIG_H */

include/configs/katmai.h

@@ -79,7 +79,7 @@
 #define CFG_ACE_BASE		0xfe000000	/* Xilinx ACE controller - Compact Flash */
 
 #define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		(0xFFFFFFFF - CFG_MONITOR_LEN + 1)
+#define CFG_MONITOR_LEN		(0xFFFFFFFF - CFG_MONITOR_BASE + 1)
 #define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc */
 
 /*-----------------------------------------------------------------------