Merge with /home/sr/git/u-boot

The default of 255 is too short for slow devices.
Patch by Martin Nykodym, 12 Dec 2005

CHANGELOG

@@ -1,7 +1,844 @@
+======================================================================
+Changes for U-Boot 1.1.4:
+======================================================================
+
+* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
+  - Changed GPIO setup to enable another address line in order to
+    address 64M of FLASH.
+  - Added function sdram_tr1_set to auto calculate the tr1 value for
+    the DDR.
+  Patch by Steven Blakeslee, 12 Dec 2005
+
+* MPC5200:  Set PCI retry counter to 0 = infinite retry;
+  The default of 255 is too short for slow devices.
+  Patch by Martin Nykodym, 12 Dec 2005
+
+* Change port configuration for O2DNT (CODEC1 on PSC1).
+
+* Fix register for PCI async mode on PPC440EP
+  Patch by Youngchul Bang, 08 Dec 2005
+
+* Fix U-Boot linking problems (add .eh_frame segment to linker script)
+  This segment may be required by some libgcc.a functions
+  (like _udivdi3).
+
+* Fix DPRAM offset/size for MPC8541/8555.
+  Simplify TQM85xx Makefile handling.
+
+* Fix data overflow (typo?) in rtc/ds1302.c
+
+* Fix U-Boot compilation for MIPS boards using ELDK 4.0
+
+* Add support for TQM8541/8555 boards, TQM85xx support reworked:
+  - Support for TQM8541/8555 boards added.
+  - Complete rework of TQM8540/8560 support.
+  - Common TQM85xx code now supports all current TQM85xx platforms
+    (TQM8540/8541/8555/8560).
+  - DDR SDRAM size detection added.
+  - CAS latency default values can be overwritten by setting "serial#"
+    to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
+    If problems are detected with this non default CAS latency,
+    the default values will be used instead.
+  - Flash size detection added.
+  - Moved FCC ethernet driver initialization behind TSEC driver init
+    -> TSEC is first device.
+  Patch by Stefan Roese, 30 Nov 2005
+
+* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
+  Patch by John Otken, 23 Nov 2005
+
+* Changed PPC44x startup message (cpu info, speed...) to common style:
+  On PPC44x platforms, the startup message generated in "cpu.c" only
+  comprised the ppc type and revision but not additional information
+  like speed etc. Those speed infos where printed in the board specific
+  code. This new implementation now prints all CPU infos in the common
+  cpu specific code. No board specific code is needed anymore and
+  therefore removed from all current 44x implementations.
+  Patch by Stefan Roese, 27 Nov 2005
+
+* Adjust TQM834x PHY addresses for latest hardware revision.
+
+* Increase malloc arena on TQM5200 board to 256 kB.
+  With 64 kb uniform flash sector size the old value of 128 kB was
+  too small.
+
+* Fix miiphy global data initialization (problem on 4xx boards when
+  no ethaddr is assigned). Initialization moved from
+  miiphy_register() to eth_initialize().
+
+  Based on initial patch for 4xx platform by Matthias Fuchs.
+
+* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
+
+* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
+  The COPYING file was extended to make clear that these files can be
+  used in non-GPL code, too.
+  Also, a corresponding note was placed in the headers of the affected files.
+
+* Add support for Prodrive P3P440 board:
+  - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
+  - CFG_FLASH_QUIET_TEST added to use the common CFI driver
+    for bank autodetection
+  Patch by Stefan Roese, 22 Nov 2005
+
+* Change all '$(...)' variable references into '${...}'
+  which makes the environment compatible with the hush shell.
+  WARNING: Support for the old '$(...)' syntax will be
+  discontinued in a later version.
+
+* Minor changes to init flags in TQM834x PCI.
+
+* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
+  Patch by Stefan Roese, 15 Nov 2005
+
+* New PPC 405EP board added: CMS700
+  Added CONFIG_NET_MULTI for VOM405 board.
+  Added reset_phy() for VOM405 board.
+  Patch by Matthias Fuchs, 09 Nov 2005
+
+* Updated PCI mapping for esd CPCI2DP board.
+  Add support for error LED.
+  Patch by Matthias Fuchs, 07 Nov 2005
+
+* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
+  Patch by Stefan Roese, 07 Nov 2005
+
+* Correct PPC Timebase register definitions (SPRN_TBRL...)
+  Patch by Stefan Roese, 07 Nov 2005
+
+* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
+  Patch by Stefan Roese, 05 Nov 2005
+
+* Additional fix for external IRQ config on Yellowstone & Yosemite
+  Patch by Stefan Roese, 03 Nov 2005
+
+* Add support for Ocotea pass 3 with 440GX Rev. F
+  Patch by Stefan Roese, 01 Nov 2005
+
+* Fix external IRQ configuration on Yellowstone & Yosemite
+  Patch by Stefan Roese, 28 Oct 2005
+
+* Add support for multiple PHYs.
+  Tested on the following boards:
+	cmcpu2      (at91rm9200/ether.c)
+	PPChameleon (ppc4xx/4xx_enet.c)
+	yukon       (mpc8220/fec.c)
+	uc100       (mpc8xx/fec.c)
+	tqm834x     (mpc834x/tsec.c) with EEPRO100
+	lite5200    (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
+  Main changes include:
+  common/miiphyutil.c
+  - miiphy_register routine was added to allow multiple PHYs to be registered
+  - miiphy_read and miiphy_write are now defined in this file, and
+    require additional argument (char *devname)
+  - other miiphy_* routines also require additional device name argument
+  ../lib_i386/board.c
+  ../lib_ppc/board.c
+  Calling reset_phy() was moved to be executed *after* eth_initialize().
+  This is necessary as now some of the implementations of reset_phy()
+  may need to use miiphy_reset() which is not allowed before eth_initialize()
+  as eth_initialize registers all required miiphy_* routines.
+  Tested on IP860 and PHY initializes properly after this change.
+
+* Correct includes for flat tree builder.
+
+* Fix conflicting types (flash_write()) in trab auto_update.c.
+
+* Add PCI support for the TQM834x board.
+
+* Add missing 4xx board to MAKEALL
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix conflicting types (flash_write()) in esd auto_update.c
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix problem with sleep in NetConsole (use get_timer())
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Add NetConsole Support for AMCC eval boards
+  Patch by Stefan Roese, 20 Oct 2005
+
+* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
+  Patch by Stefan Roese, 18 Oct 2005
+
+* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
+  Fix identation on ext2ls help entry.
+  Patch by Stefan Roese, 14 Oct 2005
+
+* Add support for TQM834x boards.
+  Cleanup.
+
+* Cleanup for GCC-4.x
+
+* Add documentation for Open Firmware Flat Tree and usage.
+  Patch by Pantelis Antoniou, 13 Oct 2005
+
+* Add missing files for Pantelis Antoniou's patch
+  Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Fix problem in ppc4xx eth-driver without ethaddr (only without
+  CONFIG_NET_MULTI set)
+  Patch by Stefan Roese, 10 Oct 2005
+
+* Fix gzip bmp support (test if malloc fails, warning when truncated).
+  Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
+  Patch by Stefan Roese, 07 Oct 2005
+
+* Add support for OF flat tree for the STXtc board.
+  Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Support passing of OF flat trees to the kernel.
+  Patch by Pantelis Antoniou, 04 Sep 2005
+
+* Cleanup
+
+* Add support for NetSilicon NS7520 processor.
+  Patch by Art Shipkowski, 12 May 2005
+
+* Add support for AP1000 board.
+  Patch by James MacAulay, 07 Oct 2005
+
+* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
+  Patch by Anders Larsen, 07 Oct 2005
+
+  The Atmel errata #11 states that the transfer buffer descriptor
+  table must be aligned on a 16-word boundary. As it turned out, this
+  is insufficient - it seems the table must be aligned on a boundary
+  at least as large as the table itself (in Linux this is not an
+  issue - the table is aligned on a PAGE_SIZE (4096) boundary).
+
+* Fixed compilation for ARM when using a (standard) hard-FP toolchain
+  Patch by Anders Larsen, 07 Oct 2005
+
+* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
+  sed the linker scripts, rather than pre-process them.
+  Patch by Peter Pearse, 07 Oct 2005
+
+* Update make target for ARM supported boards.
+  Use lowlevel_init() instead of platformsetup() [rename].
+  Patch by Peter Pearse, 06 Oct 2005
+
+* Fix booting from serial dataflash on AT91RM9200
+  Patch by Peter Menzebach, 29 Aug 2005
+
+* Add JFFS2 support for TRAB board
+  Patch by Martin Krause, 25 Aug 2005
+
+* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
+  Patch by Marcus Hall, 24 Aug 2005
+
+* Fix the machine-id of the Cogent csb637 board
+  Patch by Anders Larsen, 05 Oct 2005
+
+* Complete support for the KwikByte KB920x boards
+  Patch by Anders Larsen, 05 Oct 2005
+
+* Set the AT91RM9200 clock to asynchronous mode
+  Patch by Anders Larsen, 03 May 2005
+
+* Set the AT91RM9200 clock to synchronous mode
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Add support for Cogent csb637
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Fix dm9161.c initialization
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
+  (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
+
+* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
+  Patch by Anders Larsen, 29 Apr 2005
+
+* Fix device partition intialization for SystemACE disks.
+  Patch by Stephen Williams, 28 Apr 2005
+
+* Added support for KwikByte KB920x boards (based on AT91RM9200)
+  Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
+
+* Add support for S29GL064M-R3 flash chip on xsengine board
+  Patch by Kurt Stremerch, 18 Apr 2005
+
+* E500 update: repoint IVPR to RAM when code is relocated
+  Patch by Kylo Ginsberg, 13 Apr 2005
+
+* Fix loop end test in lib_generic/string.c:strswab()
+  Patch by Andrew Dyer, October 10, 2005
+  Signed-off-by: Andrew Dyer <amdyer@gmail.com>
+
+* Cleanup
+
+* Update ARM Integrator boards:
+  Correct addessing errors in platform files.
+  Split off common core module data from Integrator header files to
+  include/armcoremodule.h.
+  Patch by Peter Pearse, 04 Oct 2005
+
+* Make sure only supported compiler options are used
+  Import "cc-option" shell function from kernel and
+  use it to get the correct ARM GCC options for individual CPUs
+  Patch by Peter Pearse, 30 Jun 2005
+
+* Fix 440GR to print correct cpu revision
+  Patch by Stefan Roese, 04 Oct 2005
+
+* Change board message on AMCC Yosemite & Yellowstone to common style
+  Patch by Stefan Roese, 03 Oct 2005
+
+* Fix compiler warning
+
+* Fix FEC PHY addresses for TQM85xx boards
+
+* Fix uninitialized variable problem in hush shell
+  Patch by Lars Rostock, 26 Sep 2005
+
+* Undo change of f6e20fc6ca... to include/configs/trab.h
+  (Must have been an accident?)
+
+* Add support for AT91RM9200 OHCI Controller.
+  Patch by Eric Benard, 07 Apr 2005
+
+* Update ARM mach-types.h
+  Patch by Eric Benard, 07 Apr 2005
+
+* Add support for MP2USB board.
+  Patch by Eric Benard, 07 Apr 2005
+
+* Add board support for armadillo HT1070
+  Patch by Rowel Atienza, 06 Apr 2005
+
+* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
+  Patch by Vitaly Bordug, 30 Mar 2005
+
+* Add iopset command on mpc8xx
+  Patch by Daniel Eisenhut, 25 Mar 2005
+
+* Add support for MII in eepro100 driver.
+  Patch by Gleb Natapov, 21 Mar 2005
+
+* Fixes to the Lubbock (PXA 25x) support:
+  - Resolve the FIXME with respect to saving the u-boot environment.
+  - Make the default load address land in real memory.
+  - Fix lan91c96 SMC_{in,out}{b,w,l}() macros
+  Patch by David Brownell, 10 Mar 2005
+
+* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
+  Patch by Marc Leeman, 04 Mar 2005
+
+* OMAP242x H4 board update
+  - fix for ES2 differences.
+  - switch to using the cfi_flash driver.
+  - fix SRAM build address.
+  - fix for GP device operation.
+  - unlock SRAM for GP devices.
+  - display more device information.
+  - fix potential deadlock in omap24xx_i2c driver.
+  - fix DLL load values to match dpllout*1 operation.
+  - fix 2nd chip select init for combo DDR device.
+  - add support for CFI Intel 28F256L18 on H4 board.
+  Patch by Richard Woodruff, 03 Mar 2005
+
+* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
+  Patch by Steven Scholz, 02 Mar 2005
+
+* Fix typo in eth.c
+  Patch by Ara Avanesyan, 24 Feb 2005
+
+* Remove unneeded #include <malloc.h>
+  Patch by Ladislav Michl, 22 Feb 2005
+
+* Add cramfs support for m68k
+  Patch by Zachary Landau, 21 Feb 2005
+
+* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
+  Patch by Jeff Angielski, 21 Feb 2005
+
+* Fix au1x00_serial baud rate calculation:
+  remove hardcoded cpu clock divisor and use register instead;
+  round up instead of truncate
+  Patch by Andrew Dyer, 15 Feb 2005
+
+* Add Xilinx Spartan3 family FPGA support
+  Patch by Kurt Stremerch, 14 Feb 2005
+
+* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
+  Patch by Zachary Landau, 11 Feb 2005
+
+* Fix VOH405 Support
+  Patch by Matthias Fuchs, 25 Sep 2005
+
+* Added support for PCI bridge on MPC8272ADS
+  Patch by Vitaly Bordug, Feb 09 2005
+
+* Update multicore CM9XX support for Integrator AP to allow booting from flash
+  Patch by Jean-Paul Saman, 8 Feb 2005
+
+* Fix strswab() to reliably find end of string
+  Patch by Andrew Dyer, 08 Feb 2005
+
+* Fix typos in include/ppc440.h
+  Patch by Andrew E Mileski, 04 Feb 2005
+
+* Add Vibren (was Accelent) PXA255 IDP Support
+  Patch by Cliff Brake, 04 Feb 2005
+
+* Fix tools/bmp_logo.c using incorrect offset to pixel data
+  Patch by Andrew Dyer, 31 Jan 2005
+
+* Add ARM946E cpu and core module targets; remap memory to 0x00000000
+  Patch by Peter Pearse, 2 Feb 2005
+
+* Fix error handling in tools/env/fw_env.c
+  Patch by Ara Avanesyan, 01 Feb 2005
+
+* Fix MGT5100 PSC baudrate calculation
+  Patch by Sebastian Schau, 27 Jan 2005
+
+* OMAP242x fix for GP device booting
+  - Add SRAM unlock for GP devices.
+  - Change DDR DLL unlock value to allow DPLLout*1 operation.
+  Patches by Richard Woodruff, 21 Jan 2005:
+
+* Add support for AMD's Pb1x00 eval board;
+  add MII routines to the au1x00 ethernet driver;
+  add USB ohci driver (work in progress)
+  Patch by Thomas Sailer, 20 Jan 2005
+
+* Update omap5912osk board
+  Use drivers/cfi_flash.c instead of private flash driver;
+  Remove hardcoded personalized settings from omap5912osk.h;
+  Fix spacing with (RO) marks in 'flinfo' output.
+  Patch by Michael Bendzick, 14 Jan 2005
+
+* Fix warnings for PCI code on ixp
+  Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
+
+* virtex2 fix for bogus download error messages
+  The virtex2 FPGA download code watches for init going active during
+  a download of config data as an error condition. init also goes
+  active after a configuration is finished in concert with the done
+  signal. So far, the code does not check for done active until all
+  of the configuration data is sent. If configuration data has a few
+  extra pad bytes at the end, this would cause an error message even
+  though the download had suceeded.
+  NOTE: virtex2 slave serial and spartan2 versions may still have the
+  same problem.
+  Patch by Andrew Dyer, 12 Jan 2005
+
+* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
+  Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
+  message when probing for nonexistent flash in little endian mode.
+  As a side effect more efficient and smaller code is generated,
+  which is always a Good Thing (TM).
+  Patch by Ladislav Michl, 24 Sep 2005
+
+* Update for TFTP using a fixed UDP port
+  Use the approved environment variable names. Added "tftpdstp" to
+  allow ports other than 69 per Tolunay Orkun's recommendation.
+  Patch by Jerry Van Baren, 12 Jan 2005
+
+* Allow to force TFTP to use a fixed UDP port
+  (Add a configuration option CONFIG_TFTP_PORT and optional env
+  variable tftpport)
+  Patch by Jerry Van Baren, 10 Jan 2005
+
+* Fix ethernet timeouts on dbau1550 and other au1x00 systems
+  Patch by Leif Lindholm, 29 Dec 2004
+
+* Cleanup: fix broken builds
+
+* Fix PHY address argument passing with mii info command
+  Patch by Andrew Dyer, 28 Dec 2004
+
+* Cleanup (PPC4xx is AMCC now)
+
+* esd CPCI2DP board added
+  Patch by Matthias Fuchs, 22 Sep 2005
+
+* esd PMC405 board updated
+  Patch by Matthias Fuchs, 22 Sep 2005
+
+* Add SM501 support to HH405 board.
+  Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
+  Add support for eeprom write-enable (CFG_EEPROM_WREN).
+  Patch by Stefan Roese, 22 Sep 2005
+
+* Fix autonegotiation in tsec ethernet driver
+  Patch by Stefan Roese, 21 Sep 2005
+
+* Fix bug in auto_update (trab board)
+  Patch by Martin Krause, 16 Sep 2005
+
+* Fix computation of framebuffer palette for 8bpp LCD bitmaps
+  Patch by Francesco Mandracci, 16 Sep 2005
+
+* Update configuration for INKA4x0 board
+
+* Update configuration for PM854 board
+  Based on patch by R. Loeffl, 20 Jul 2005
+
+* Add PCI support to TQM8540 and TQM8560 boards
+  Patch by Stefan Roese, 15 Sep 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+  boards (baudrate, environment...). Flash driver fixed.
+  Patch by Stefan Roese, 15 Sep 2005
+
+* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
+  ethernet port on ebony.
+  Patch by Stefan Roese, 7 Sep 2005
+
+* Added support for mtddevnum and mtddevname variables (mtdparts command)
+
+* Change default console baud rate for stxxtc board
+
+* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
+  Patch by Stefan Roese, 31 Aug 2005
+
+* Fix default command set (don't include CFG_CMD_DISPLAY command)
+  Patch by Pantelis Antoniou, 02 Sep 2005
+
+* Cleanup
+
+* Enable SM712 driver support for HMI1001 board.
+
+* Fix problems with ld version 2.16 (dot outside sections problem)
+  Pointed out by Gerhard Jaeger, 31 Aug 2005;
+  cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
+
+* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
+
+* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
+
+* Add keyboard and dot matrix display support for HMI1001 board.
+
+* Prepare U-Boot for gcc-4.x
+
+* Fixed Bamboo port to enable running without DDR-DIMM
+  (Bamboo has also 64MB onboard DDR)
+  Patch by Stefan Roese, 24 Aug 2005
+
+* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
+  now handling all 4xx cpu's
+  Patch by Stefan Roese, 16 Aug 2005
+
+* Fix make dependencies for at91rm9200 and ks8695 cpus
+  Patch by Steven Scholz, 23 Aug 2005
+
+* Add JFFS2 support for TQM5200 board
+
+* Add esd cpci5200 and pf5200 boards
+  Patch by Reinhard Arlt, 22 Aug 2005
+
+* Fix sysclock for TQM8540 and TQM8560 boards
+  Patch by Martin Krause, 25 Jul 2005
+
+* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
+  Patch by Martin Krause, 08 Jun 2005
+
+* Add new board specific commands for TQM5200/STK52XX
+  - Sound commands (beep, wav, sound)
+  - Test commands (led, can, backlight, rs232)
+  Patch by Martin Krause, 02 May 2005
+
+* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
+  because of a bug in the AT91RM9200 CPU PLL
+  Patch by Martin Krause, 22 Apr 2005
+
+* Add automatic HW detection for another CMC_PU2 variant
+  Patch by Martin Krause, 20 Apr 2005
+
+* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
+  Patch by Martin Krause, 19 Apr 2005
+
+* Fix initialization problem on TQM5200 without SM501
+  Patch by Martin Krause, 08 Apr 2005
+
+* Add RTC support for STK52XX.200
+  Patch by Martin Krause, 07 Apr 2005
+
+* Add support for IFM o2dnt board
+
+* Enable PCI on hmi1001 board
+
+* Fix return values of the jffs2 commands ls/fsload/fsinfo,
+  so we can use them to, e.g., check the existence of a file with
+  "if ls foo; then this; else that; fi" in the hush shell
+  Patch by Andreas Engel, 16 August 2005
+
+* Coding style cleanup
+
+* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
+  Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
+
+* Check return value of malloc in 440gx_enet.c
+  Patch by Travis B. Sawyer, 18 Jul 2005
+
+* Add Sandburst Metrobox and Sandburst Karef board support packages.
+  Second serial port on 440GX now defined as a system device.
+  Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
+  Patch by Travis B. Sawyer, 12 Jul 2005
+
 ======================================================================
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Minor code cleanup
+
+* Add forgotten new fils from latest VoiceBlue update
+
+* Make bootretry feature work with hush shell.
+  Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
+  Patch by Andreas Engel, 19 Jul 2005
+
+* Update Hymod Board Database PHP code in "tools" directory
+  Patch by Murray Jensen, 01 Jul 2005
+
+* Make "tr" command use POSIX compliant; export HOSTOS make variable
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Fix Murray Jensen's mail address.
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Preserve PHY_BMCR during a soft reset.
+  Patch by Carl Riechers, 24 Jun 2005
+
+* VoiceBlue update: eeprom tool can also store firmware version now.
+  eeprom.bin is runable by jumping at load address.
+  Patch by Ladislav Michl, 23 May 2005
+
+* Move the AT91RM9200DK to the ARM Systems list.
+  Patch by Anders Larsen, 26 Apr 2005
+
+* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
+  Patch by Anders Larsen, 26 Apr 2005
+
+* measure_gclk() is needed when DEBUG is enabled
+  Patch by Bryan O'Donoghue, 25 Apr 2005
+
+* Add UPD-Checksum code, fix problem in net.c (return instead of break)
+  Patch by Reinhard Arlt, 12 Aug 2005
+
+* esd PCI405 board updated
+  Patch by Matthias Fuchs, 28 Jul 2005
+
+* esd WUH405 and DU405 board updated
+  Patch by Matthias Fuchs, 27 Jul 2005
+
+* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
+  Patch by Matthias Fuchs, 4 May 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+  boards (baudrate, environment...). Flash driver fixed.
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add NAND FLASH support for AMCC Bamboo 440EP eval board
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add configuration for IFM AEV FIFO board.
+  Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
+* Fix CompactFlash problem on HMI1001 board
+
+* Make new "mtdparts" code build with older compilers
+  Patch by Andrea Scian, 09 Aug 2005
+
+* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
+  CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
+  with the 405 defines and the linux kernel defines.
+  Patch by Stefan Roese, 08 Aug 2005
+
+* Fix compiler warnings with older GCC versions
+
+* Add common (with Linux) MTD partition scheme and "mtdparts" command
+
+  Old, obsolete and duplicated code was cleaned up and replace by the
+  new partitioning method. There are two possible approaches now:
+
+  The first one is to define a single, static partition:
+
+  #undef CONFIG_JFFS2_CMDLINE
+  #define CONFIG_JFFS2_DEV               "nor0"
+  #define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF	/* use whole device */
+  #define CONFIG_JFFS2_PART_SIZE         0x00100000	/* use 1MB */
+  #define CONFIG_JFFS2_PART_OFFSET       0x00000000
+
+  The second method uses the mtdparts command line option and dynamic
+  partitioning:
+
+  /* mtdparts command line support */
+  #define CONFIG_JFFS2_CMDLINE
+  #define MTDIDS_DEFAULT         "nor1=zuma-1,nor2=zuma-2"
+  #define MTDPARTS_DEFAULT       "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+
+  Command line of course produces bigger images, and may be inappropriate
+  for some targets, so by default it's off.
+
+* Fix build problems for PM856 Board
+
+* Fix sign extension bug in 'fpga loadb' command;
+  make 'fpga loadb' always print the file header info
+  Patch by Andrew Dyer, 11 Jan 2005
+
+* Fix errors that occur when accessing SystemACE CF
+  Patch by Jeff Angielski, 09 Jan 2005
+
+* Document switching between U-Boot and PlanetCore on RPXlite
+  by Sam Song, 24 Dec 2004
+
+* Fix PowerQUICC II mask detection.
+  Patch by Eugene Surovegin, 20 Dec 2004
+
+* Add support for Altera NIOS DK1C20 board
+  Patch by Shlomo Kut, 13 Dec 2004
+
+* Add support for ep8248 board
+  Patch by Yuli Barcohen, 12 Dec 2004
+
+  Minor code cleanup.
+
+* Fix baudrate setting for KGDB on MPC8260
+  Patch by HoJin, 11 Dec 2004
+
+* Fix 'mii help' text formatting
+  Patch by Cory Tusar, 10 Dec 2004
+
+* Fix return code of NFS command
+  Patch by Hiroshi Ito, 11 Dec 2004
+
+* Fix typo
+
+* Fix compiler warnings in cpu/ppc4xx/usbdev.c
+  Patch by Steven Blakeslee, 04 Aug 2005
+
+* Add support for AMCC Bamboo PPC440EP eval board
+  Patch by Stefan Roese, 04 Aug 2005
+
+* Patch by Jon Loeliger
+  Fix style issues primarily in 85xx and 83xx boards.
+    - C++ comments
+    - Trailing white space
+    - Indentation not by TAB
+    - Excessive amount of empty lines
+    - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+    Add Xianghua Xiao and Lunsheng Wang's support for the
+    GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+  Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+  Move the TSEC driver out of cpu/mpc85xx as it will be shared
+  by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+  Implemented support for MPC8548CDS board.
+  Added DDR II support based on SPD values for MPC85xx boards.
+  This roll-up patch also includes bugfies for the previously
+  published patches:
+    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+  Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+  For MPC85xxCDS:
+    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+    for faster flash parts.
+    Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+  Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+  - Convert the CPM2 based functionality to use new CONFIG_CPM2
+    option rather than a myriad of CONFIG_MPC8560-like variants.
+    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
+    new CONFIG_CPM2 option to each 8260 board.
+
+* Add support for MicroSys PM856 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Minor fixes to PM854 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Adjust configuration of XENIAX board
+  (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+  routed to the Watchdog handler
+  Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+  Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+  Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+  loopback test code
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+    for details.
+  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+    to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+  - Add support for AMCC PPC440EP/GR.
+  - Add support for AMCC Yosemite PPC440EP eval board.
+  - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+  - fix alignment of NAND size
+  - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+  The code is provided for, and was tested on, the Yukon/Alaska
+  and PM520 boards only.
+
+  A bug in flash_real_protect() for the Yukon board was fixed by
+  adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+  This fixes a problem of displaying bogus voltages when the voltages
+  are so low that the I2C devices start failing while the rest of the
+  system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+  Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+  Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+  "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+  U-Boot will automaticially find the end of the corresponding sector.
+
 * Patch by Stefan Roese, 5 Jul 2005:
   Update uc100 board PHY setup
 

COPYING

@@ -2,10 +2,17 @@
 applications that use U-Boot services by means of the jump table
 provided by U-Boot exactly for this purpose - this is merely
 considered normal use of U-Boot, and does *not* fall under the
-heading of "derived work". Also note that the GPL below is
+heading of "derived work".
-copyrighted by the Free Software Foundation, but the instance of code
+
-that it refers to (the U-Boot source code) is copyrighted by me and
+  The header files "include/image.h" and "include/asm-*/u-boot.h"
-others who actually wrote it. -- Wolfgang Denk
+define interfaces to U-Boot. Including these (unmodified) header
+files in another file is considered normal use of U-Boot, and does
+*not* fall under the heading of "derived work".
+
+  Also note that the GPL below is copyrighted by the Free Software
+Foundation, but the instance of code that it refers to (the U-Boot
+source code) is copyrighted by me and others who actually wrote it.
+-- Wolfgang Denk
 
 =======================================================================
 

CREDITS

@@ -29,6 +29,7 @@ D: ERIC Support
 N: Pantelis Antoniou
 E: panto@intracom.gr
 D: NETVIA & NETPHONE board support, ARTOS support.
+D: Support for Silicon Turnkey eXpress XTc
 
 N: Pierre Aubert
 E: <p.aubert@staubli.com>
@@ -64,6 +65,12 @@ N: Raphael Bossek
 E: raphael.bossek@solutions4linux.de
 D: 8xxrom-0.3.0
 
+N: Cliff Brake
+E: cliff.brake@gmail.com
+D: Port to Vibren PXA255 IDP platform
+W: http://www.vibren.com
+W: http://bec-systems.com
+
 N: Rick Bronson
 E: rick@efn.org
 D: Atmel AT91RM9200DK and NAND support
@@ -198,10 +205,9 @@ D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
 W: www.denx.de
 
 N: Murray Jensen
-E: Murray.Jensen@cmst.csiro.au
+E: Murray.Jensen@csiro.au
 D: Initial 8260 support; GDB support
 D: Port to Cogent+Hymod boards; Hymod Board Database
-W: http://www.msa.cmst.csiro.au/ourstaff/MurrayJensen/mjj.html
 
 N: Yoo. Jonghoon
 E: yooth@ipone.co.kr
@@ -249,6 +255,11 @@ N: Thomas Lange
 E: thomas@corelatus.se
 D: Support for GTH and dbau1x00 boards; lots of PCMCIA fixes
 
+N: Marc Leeman
+E: marc.leeman@barco.com
+D: Support for Barco Streaming Video Card (SVC) and Sample Compress Network (SCN)
+W: www.barco.com
+
 N: The LEOX team
 E: team@leox.org
 D: Support for LEOX boards, DS164x RTC
@@ -269,8 +280,9 @@ E: lo@routefree.com
 D: Support for DOS partitions
 
 N: Dan Malek
-E: dan@netx4.com
+E: dan@embeddedalley.com
 D: FADSROM, the grandfather of all of this
+D: Support for Silicon Turnkey eXpress XTc
 
 N: Andrea "llandre" Marson
 E: andrea.marson@dave-tech.it
@@ -305,6 +317,10 @@ E: rof@sysgo.de
 D: Initial support for SSV-DNP1110, SMC91111 driver
 W: www.elinos.com
 
+N: John Otken
+E: jotken@softadvances.com
+D: Support for AMCC Luan 440SP board
+
 N: Tolunay Orkun
 E: torkun@nextio.com
 D: Support for Cogent CSB272 & CSB472 boards
@@ -339,7 +355,7 @@ W: http://www.windriver.com
 
 N: Stefan Roese
 E: stefan.roese@esd-electronics.com
-D: IBM PPC401/403/405GP Support; Windows environment support
+D: AMCC PPC401/403/405GP Support; Windows environment support
 
 N: Erwin Rol
 E: erwin@muffin.org
@@ -355,7 +371,7 @@ D: Author of LiMon-1.4.2, which contributed some ideas
 
 N: Travis B. Sawyer
 E: travis.sawyer@sandburst.com
-D: Support for IBM PPC440GX, XES XPedite1000 440GX PrPMC board.  IBM 440gx Ref Platform (Ocotea)
+D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board.  AMCC 440gx Ref Platform (Ocotea)
 
 N: Paolo Scaffardi
 E: arsenio@tin.it
@@ -365,6 +381,10 @@ N: Robert Schwebel
 E: r.schwebel@pengutronix.de
 D: Support for csb226, logodl and innokom boards (PXA2xx)
 
+N: Art Shipkowski
+E: art@videon-central.com
+D: Support for NetSilicon NS7520
+
 N: Yasushi Shoji
 E: yashi@atmark-techno.com
 D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
@@ -431,3 +451,8 @@ N: Alex Zuepke
 E: azu@sysgo.de
 D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
 W: www.elinos.com
+
+N: James MacAulay
+E: james.macaulay@amirix.com
+D: Suppport for Amirix AP1000
+W: www.amirix.com

MAINTAINERS

@@ -27,11 +27,15 @@ Pantelis Antoniou <panto@intracom.gr>
 
 Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 
+	cpci5200		MPC5200
+	pf5200			MPC5200
+
 	CPCI750			PPC750FX/GX
 
 Yuli Barcohen <yuli@arabellasw.com>
 
 	Adder			MPC87x/MPC852T
+	ep8248			MPC8248
 	ISPAN			MPC8260
 	MPC8260ADS		MPC826x/MPC827x/MPC8280
 	Rattler			MPC8248
@@ -41,10 +45,6 @@ Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
 
 	sacsng			MPC8260
 
-Rick Bronson <rick@efn.org>
-
-	AT91RM9200DK		at91rm9200
-
 Oliver Brown <obrown@adventnetworks.com>
 
 	gw8260			MPC8260
@@ -129,107 +129,6 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
 
 	AmigaOneG3SE		MPC7xx
 
-Frank Gottschling <fgottschling@eltec.de>
-
-	MHPC			MPC8xx
-
-	BAB7xx			MPC740/MPC750
-
-Wolfgang Grandegger <wg@denx.de>
-
-	CCM			MPC855
-
-	PN62			MPC8240
-
-	IPHASE4539		MPC8260
-	SCM			MPC8260
-
-Howard Gray <mvsensor@matrix-vision.de>
-
-	MVS1			MPC823
-
-Bill Hargen <Bill_Hargen@Jabil.com>
-
-	BUBINGA405EP		PPC405EP
-
-Klaus Heydeck <heydeck@kieback-peter.de>
-
-	KUP4K			MPC855
-	KUP4X			MPC859
-
-Murray Jensen <Murray.Jensen@cmst.csiro.au>
-
-	cogent_mpc8xx		MPC8xx
-
-	cogent_mpc8260		MPC8260
-	hymod			MPC8260
-
-Brad Kemp <Brad.Kemp@seranoa.com>
-
-	ppmc8260		MPC8260
-
-Sangmoon Kim <dogoil@etinsys.com>
-
-	debris			MPC8245
-
-Nye Liu <nyet@zumanetworks.com>
-
-	ZUMA			MPC7xx_74xx
-
-Thomas Lange <thomas@corelatus.se>
-
-	GTH			MPC860
-
-The LEOX team <team@leox.org>
-
-	ELPT860			MPC860T
-
-Eran Man <eran@nbase.co.il>
-
-	EVB64260_750CX		MPC750CX
-
-Andrea "llandre" Marson <andrea.marson@dave-tech.it>
-
-	PPChameleonEVB	PPC405EP
-
-Reinhard Meyer <r.meyer@emk-elektronik.de>
-
-	TOP860			MPC860T
-	TOP5200			MPC5200
-
-Scott McNutt <smcnutt@artesyncp.com>
-
-	EBONY			PPC440GP
-
-Tolunay Orkun <torkun@nextio.com>
-	csb272			PPC405GP
-	csb472			PPC405GP
-
-Keith Outwater <Keith_Outwater@mvis.com>
-
-	GEN860T			MPC860T
-	GEN860T_SC		MPC860T
-
-Frank Panno <fpanno@delphintech.com>
-
-	ep8260			MPC8260
-
-Peter Pearse <peter.pearse@arm.com>
-
-	Integrator/AP		CM 926EJ-S, CM7x0T, CM9x0T
-	Integrator/CP		CM 926EJ-S  CM920T, CM940T, CM922T-XA10
-	Versatile/AB		ARM926EJ-S
-	Versatile/PB		ARM926EJ-S
-
-Denis Peter <d.peter@mpl.ch>
-
-	MIP405			PPC4xx
-	PIP405			PPC4xx
-
-Daniel Poirot <dan.poirot@windriver.com>
-	sbc8240			MPC8240
-	sbc405			PPC405GP
-
 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 
 	ADCIOP			IOP480 (PPC401)
@@ -237,6 +136,7 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	AR405			PPC405GP
 	ASH405			PPC405EP
 	CANBT			PPC405CR
+	CPCI2DP			PPC405GP
 	CPCI405			PPC405GP
 	CPCI4052		PPC405GP
 	CPCI405AB		PPC405GP
@@ -257,11 +157,146 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	VOH405			PPC405EP
 	VOM405			PPC405EP
 	WUH405			PPC405EP
+	CMS700                  PPC405EP
+
+Frank Gottschling <fgottschling@eltec.de>
+
+	MHPC			MPC8xx
+
+	BAB7xx			MPC740/MPC750
+
+Wolfgang Grandegger <wg@denx.de>
+
+	CCM			MPC855
+
+	PN62			MPC8240
+
+	IPHASE4539		MPC8260
+	SCM			MPC8260
+
+Howard Gray <mvsensor@matrix-vision.de>
+
+	MVS1			MPC823
+
+Klaus Heydeck <heydeck@kieback-peter.de>
+
+	KUP4K			MPC855
+	KUP4X			MPC859
+
+Murray Jensen <Murray.Jensen@csiro.au>
+
+	cogent_mpc8xx		MPC8xx
+
+	cogent_mpc8260		MPC8260
+	hymod			MPC8260
+
+Brad Kemp <Brad.Kemp@seranoa.com>
+
+	ppmc8260		MPC8260
+
+Sangmoon Kim <dogoil@etinsys.com>
+
+	debris			MPC8245
+
+Thomas Lange <thomas@corelatus.se>
+
+	GTH			MPC860
+
+The LEOX team <team@leox.org>
+
+	ELPT860			MPC860T
+
+Nye Liu <nyet@zumanetworks.com>
+
+	ZUMA			MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+	MPC8541CDS		MPC8541
+	MPC8555CDS		MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+	STxXTc			MPC8xx
+
+Eran Man <eran@nbase.co.il>
+
+	EVB64260_750CX		MPC750CX
+
+Andrea "llandre" Marson <andrea.marson@dave-tech.it>
+
+	PPChameleonEVB	PPC405EP
+
+Reinhard Meyer <r.meyer@emk-elektronik.de>
+
+	TOP860			MPC860T
+	TOP5200			MPC5200
+
+Tolunay Orkun <torkun@nextio.com>
+
+	csb272			PPC405GP
+	csb472			PPC405GP
+
+John Otken <jotken@softadvances.com>
+
+	luan			PPC440SP
+
+Keith Outwater <Keith_Outwater@mvis.com>
+
+	GEN860T			MPC860T
+	GEN860T_SC		MPC860T
+
+Frank Panno <fpanno@delphintech.com>
+
+	ep8260			MPC8260
+
+Peter Pearse <peter.pearse@arm.com>
+	integratorcp		All current ARM supplied &
+				supported core modules
+				- see http://www.arm.com
+				/products/DevTools
+				/Hardware_Platforms.html
+	versatile		ARM926EJ-S
+	versatile		ARM926EJ-S
+
+Denis Peter <d.peter@mpl.ch>
+
+	MIP405			PPC4xx
+	PIP405			PPC4xx
+
+Daniel Poirot <dan.poirot@windriver.com>
+
+	sbc8240			MPC8240
+	sbc405			PPC405GP
+
+Stefan Roese <sr@denx.de>
+
+	uc100			MPC857
+
+	TQM85xx			MPC8540/8541/8555/8560
+
+	bamboo			PPC440EP
+	bunbinga		PPC405EP
+	ebony			PPC440GP
+	ocotea			PPC440GX
+	p3p440			PPC440GP
+	sycamore		PPC405GPr
+	walnut			PPC405GP
+	yellowstone		PPC440GR
+	yosemite		PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+	HIDDEN_DRAGON	MPC8241/MPC8245
 
 Travis Sawyer (travis.sawyer@sandburst.com>
 
+	KAREF			PPC440GX
+	METROBOX		PPC440GX
 	XPEDITE1K		PPC440GX
-	OCOTEA			PPC440GX
 
 Peter De Schrijver <p2@mind.be>
 
@@ -294,21 +329,6 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Jon Loeliger <jdl@freescale.com>
-
-	MPC8540ADS		MPC8540
-	MPC8560ADS		MPC8560
-	MPC8541CDS		MPC8541
-	MPC8555CDS		MPC8555
-
-Dan Malek <dan@embeddededge.com>
-
-	STxGP3			MPC85xx
-
-Yusdi Santoso <yusdi_santoso@adaptec.com>
-
-	HIDDEN_DRAGON	MPC8241/MPC8245
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -327,7 +347,6 @@ Unknown / orphaned boards:
 
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx
 
 	MOUSSE			MPC824x
 
@@ -344,6 +363,22 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+Rowel Atienza <rowel@diwalabs.com>
+
+	armadillo		ARM720T
+
+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
+Cliff Brake <cliff.brake@gmail.com>
+
+	pxa255_idp		xscale
+
+Rick Bronson <rick@efn.org>
+
+	AT91RM9200DK		at91rm9200
+
 George G. Davis <gdavis@mvista.com>
 
 	assabet			SA1100
@@ -362,6 +397,11 @@ Marius Gr
 	impa7			ARM720T (EP7211)
 	ep7312			ARM720T (EP7312)
 
+Kshitij Gupta <kshitij@ti.com>
+
+	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
+
 Kyle Harris <kharris@nexus-tech.net>
 
 	lubbock			xscale
@@ -373,29 +413,13 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T
 
-Prakash Kumar <prakash@embedx.com>
-
-	cerf250			xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
-	omap1510inn		ARM925T
-	omap1610inn		ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
-	omap730p2		ARM926EJS
-
 Nishant Kamat <nskamat@ti.com>
 
 	omap1610h2		ARM926EJS
 
-Rishi Bhattacharya <rishi@ti.com>
+Prakash Kumar <prakash@embedx.com>
 
-	omap5912osk		ARM926EJS
+	cerf250			xscale
-
-Richard Woodruff <r-woodruff2@ti.com>
-
-	omap2420h4		ARM1136EJS
 
 David M<>ller <d.mueller@elsoft.ch>
 
@@ -406,6 +430,10 @@ Rolf Offermanns <rof@sysgo.de>
 
 	shannon			SA1100
 
+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+	omap730p2		ARM926EJS
+
 Robert Schwebel <r.schwebel@pengutronix.de>
 
 	csb226			xscale
@@ -421,6 +449,10 @@ Greg Ungerer <greg.ungerer@opengear.com>
 	cm4116			ks8695p
 	cm4148			ks8695p
 
+Richard Woodruff <r-woodruff2@ti.com>
+
+	omap2420h4		ARM1136EJS
+
 Alex Z<>pke <azu@sysgo.de>
 
 	lart			SA1100

MAKEALL

@@ -25,8 +25,9 @@ LIST_5xx="	\
 #########################################################################
 
 LIST_5xxx="	\
-	icecube_5100	icecube_5200	EVAL5200	PM520		\
+	cpci5200	icecube_5100	icecube_5200	EVAL5200	\
-	Total5100	Total5200	Total5200_Rev2	TQM5200_auto	\
+	pf5200		PM520		Total5100	Total5200	\
+	Total5200_Rev2	TQM5200_auto	o2dnt				\
 "
 
 #########################################################################
@@ -60,16 +61,20 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
+	ADCIOP		AP1000		AR405		ASH405		\
-	CANBT		CPCI405		CPCI4052	CPCI405AB	\
+	bubinga		CANBT		CMS700		CPCI2DP		\
+	CPCI405		CPCI4052	CPCI405AB	CPCI405DT	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
+	ebony		ERIC		EXBITGEN	G2000		\
-	JSE		MIP405		MIP405T		ML2		\
+	HH405		HUB405		JSE		KAREF		\
-	ml300		OCOTEA		OCRTC		ORSG		\
+	luan		METROBOX	MIP405		MIP405T		\
-	PCI405		PIP405		PLU405		PMC405		\
+	ML2		ml300		ocotea		OCRTC		\
-	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
+	ORSG		p3p440		PCI405		PIP405		\
-	WALNUT405	WUH405          XPEDITE1K			\
+	PLU405		PMC405	        PPChameleonEVB	sbc405		\
+	VOH405		VOM405          W7OLMC		W7OLMG		\
+	walnut		WUH405		XPEDITE1K	yellowstone	\
+	yosemite							\
 "
 
 #########################################################################
@@ -85,11 +90,11 @@ LIST_8220="	\
 #########################################################################
 
 LIST_824x="	\
-	A3000		BMW		CPC45		CU824		\
+	A3000		barco		BMW		CPC45		\
-	debris		eXalion		HIDDEN_DRAGON	MOUSSE		\
+	CU824		debris		eXalion		HIDDEN_DRAGON	\
-	MUSENKI		MVBLUE		OXC		PN62		\
+	MOUSSE		MUSENKI		MVBLUE		OXC		\
-	Sandpoint8240	Sandpoint8245	SL8245		utx8245		\
+	PN62		Sandpoint8240	Sandpoint8245	sbc8240		\
-	sbc8240	\
+	SL8245		utx8245						\
 "
 
 #########################################################################
@@ -98,22 +103,32 @@ LIST_824x="	\
 
 LIST_8260="	\
 	atc		cogent_mpc8260	CPU86		CPU87		\
-	ep8260		gw8260		hymod		IPHASE4539	\
+	ep8248		ep8260		gw8260		hymod		\
-	ISPAN		MPC8260ADS	MPC8266ADS	MPC8272ADS	\
+	IPHASE4539	ISPAN		MPC8260ADS	MPC8266ADS	\
-	PM826		PM828		ppmc8260	Rattler8248	\
+	MPC8272ADS	PM826		PM828		ppmc8260	\
-	RPXsuper	rsdproto	sacsng		sbc8260		\
+	Rattler8248	RPXsuper	rsdproto	sacsng		\
-	SCM		TQM8260_AC	TQM8260_AD	TQM8260_AE	\
+	sbc8260		SCM		TQM8260_AC	TQM8260_AD	\
-	ZPC1900								\
+	TQM8260_AE	ZPC1900						\
 "
 
+#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx="	\
+	MPC8349ADS	TQM834x\
+"
+
+
 #########################################################################
 ## MPC85xx Systems (includes 8540, 8560 etc.)
 #########################################################################
 
 LIST_85xx="	\
-	MPC8540ADS	MPC8541CDS	MPC8555CDS	MPC8560ADS	\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
-	PM854		sbc8540		sbc8560		stxgp3		\
+	MPC8555CDS	MPC8560ADS	PM854		PM856		\
-	TQM8540								\
+	sbc8540		sbc8560		stxgp3		TQM8540		\
+	TQM8541		TQM8555		TQM8560				\
 "
 
 #########################################################################
@@ -132,6 +147,7 @@ LIST_7xx="	\
 LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
 	  ${LIST_8xx}				\
 	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
+	  ${LIST_83xx}				\
 	  ${LIST_85xx}				\
 	  ${LIST_4xx}				\
 	  ${LIST_74xx} ${LIST_7xx}"
@@ -146,24 +162,40 @@ LIST_SA="assabet dnp1110 gcplus lart shannon"
 ## ARM7 Systems
 #########################################################################
 
-LIST_ARM7="B2 ep7312 evb4510 impa7 modnet50"
+LIST_ARM7="	\
+	armadillo	B2		ep7312		evb4510		\
+	impa7		integratorap	ap7		ap720t		\
+	modnet50							\
+"
 
 #########################################################################
 ## ARM9 Systems
 #########################################################################
 
 LIST_ARM9="	\
-	at91rm9200dk	cmc_pu2		integratorcp	integratorap 	\
+	at91rm9200dk	cmc_pu2						\
-	lpd7a400	mx1ads		mx1fs2		omap1510inn	\
+	ap920t		ap922_XA10	ap926ejs	ap946es		\
-	omap1610h2	omap1610inn	omap730p2	scb9328		\
+	ap966		cp920t		cp922_XA10	cp926ejs	\
-	smdk2400	smdk2410	trab		VCMA9		\
+	cp946es		cp966		lpd7a400	mp2usb		\
-	versatile	voiceblue					\
+	mx1ads		mx1fs2		omap1510inn	omap1610h2	\
+	omap1610inn	omap730p2	scb9328		smdk2400	\
+	smdk2410	trab		VCMA9		versatile	\
+	versatileab	versatilepb	voiceblue
+"
+
+#########################################################################
+## ARM10 Systems
+#########################################################################
+LIST_ARM10="	\
+	integratorcp	cp1026						\
 "
 
 #########################################################################
 ## ARM11 Systems
 #########################################################################
-LIST_ARM11="omap2420h4"
+LIST_ARM11="	\
+	cp1136		omap2420h4					\
+"
 
 #########################################################################
 ## Xscale Systems
@@ -171,8 +203,8 @@ LIST_ARM11="omap2420h4"
 
 LIST_pxa="	\
 	adsvix		cerf250		cradle		csb226		\
-	innokom		lubbock		wepep250	xaeniax		\
+	innokom		lubbock		pxa255_idp	wepep250	\
-	xm250		xsengine							\
+	xaeniax		xm250		xsengine			\
 "
 
 LIST_ixp="ixdp425"
@@ -180,12 +212,12 @@ LIST_ixp="ixdp425"
 
 LIST_arm="	\
 	${LIST_SA}							\
-	${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM11}				\
+	${LIST_ARM7} ${LIST_ARM9} ${LIST_ARM10} ${LIST_ARM11}		\
 	${LIST_pxa} ${LIST_ixp}						\
 "
 
 #########################################################################
-## MIPS Systems
+## MIPS Systems		(default = big endian)
 #########################################################################
 
 LIST_mips4kc="incaip"
@@ -196,6 +228,18 @@ LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
 
 LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
 
+#########################################################################
+## MIPS Systems		(little endian)
+#########################################################################
+
+LIST_mips4kc_el=""
+
+LIST_mips5kc_el=""
+
+LIST_au1xx0_el="dbau1550_el"
+
+LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
+
 #########################################################################
 ## i386 Systems
 #########################################################################
@@ -249,10 +293,10 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	ppc|5xx|5xxx|8xx|8220|824x|8260|85xx|4xx|7xx|74xx| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
-	arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
+	arm|SA|ARM7|ARM9|ARM10|ARM11|pxa|ixp| \
 	microblaze| \
-	mips| \
+	mips|mips_el| \
 	nios|nios2| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`

Makefile

@@ -29,10 +29,10 @@ HOSTARCH := $(shell uname -m | \
 	    -e s/powerpc/ppc/ \
 	    -e s/macppc/ppc/)
 
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH
+export	HOSTARCH HOSTOS
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -54,7 +54,7 @@ ifeq ($(HOSTARCH),ppc)
 CROSS_COMPILE =
 else
 ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
@@ -97,6 +97,9 @@ endif
 ifeq ($(CPU),ppc4xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
@@ -228,6 +231,12 @@ PATI_config:		unconfig
 ## MPC5xxx Systems
 #########################################################################
 
+aev_config: unconfig
+	@./mkconfig -a aev ppc mpc5xxx tqm5200
+
+cpci5200_config:  unconfig
+	@./mkconfig -a cpci5200  ppc mpc5xxx cpci5200 esd
+
 hmi1001_config:         unconfig
 	@./mkconfig hmi1001 ppc mpc5xxx hmi1001
 
@@ -271,6 +280,12 @@ icecube_5100_config:			unconfig
 inka4x0_config:		unconfig
 	@./mkconfig inka4x0 ppc mpc5xxx inka4x0
 
+o2dnt_config:
+	@./mkconfig -a o2dnt ppc mpc5xxx o2dnt
+
+pf5200_config:  unconfig
+	@./mkconfig -a pf5200  ppc mpc5xxx pf5200 esd
+
 PM520_config \
 PM520_DDR_config \
 PM520_ROMBOOT_config \
@@ -351,6 +366,11 @@ MiniFAP_config:	unconfig
 		}
 	@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
 
+spieval_config:	unconfig
+	echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+	echo "... with automatic CS configuration"
+	@./mkconfig -a spieval ppc mpc5xxx tqm5200
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -633,6 +653,9 @@ SM850_config	:	unconfig
 SPD823TS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx spd8xx
 
+stxxtc_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx stxxtc
+
 svm_sc8xx_config:	unconfig
 	@ >include/config.h
 	@./mkconfig $(@:_config=) ppc mpc8xx svm_sc8xx
@@ -698,6 +721,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(
 ADCIOP_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
 
+AP1000_config:unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix
+
 APC405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
 
@@ -707,8 +733,11 @@ AR405_config:	unconfig
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 
-BUBINGA405EP_config:	unconfig
+bamboo_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+	@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
 
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@@ -728,6 +757,9 @@ CATcenter_33_config:	unconfig
 		}
 	@./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
 
+CPCI2DP_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx cpci2dp esd
+
 CPCI405_config	\
 CPCI4052_config	\
 CPCI405DT_config	\
@@ -759,8 +791,8 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 
-EBONY_config:	unconfig
+ebony_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ebony
+	@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
 
 ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -780,6 +812,15 @@ HUB405_config:	unconfig
 JSE_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx jse
 
+KAREF_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+
+luan_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx luan amcc
+
+METROBOX_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
+
 MIP405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
 
@@ -794,13 +835,16 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
 
-OCOTEA_config:	unconfig
+ocotea_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
 
 OCRTC_config		\
 ORSG_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
 
+p3p440_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive
+
 PCI405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
 
@@ -846,18 +890,25 @@ PPChameleonEVB_HI_33_config:	unconfig
 sbc405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx sbc405
 
+sycamore_config:	unconfig
+	@echo "Configuring for sycamore board as subset of walnut..."
+	@./mkconfig -a walnut ppc ppc4xx walnut amcc
+
 VOH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
 
 VOM405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
 
+CMS700_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx cms700 esd
+
 W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
 
-WALNUT405_config:	unconfig
+walnut_config: unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+	@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
 
 WUH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@@ -865,18 +916,23 @@ WUH405_config:	unconfig
 XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 
+yosemite_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
-Alaska8220_config:	unconfig
+
+Alaska8220_config	\
+Yukon8220_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 alaska
 
 sorcery_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 sorcery
 
-Yukon8220_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8220 yukon
-
 #########################################################################
 ## MPC824x Systems
 #########################################################################
@@ -885,6 +941,9 @@ xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,
 A3000_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x a3000
 
+barco_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x barco
+
 BMW_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x bmw
 
@@ -943,9 +1002,6 @@ SL8245_config: unconfig
 utx8245_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x utx8245
 
-cobra5272_config :		unconfig
-	@./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
-
 #########################################################################
 ## MPC8260 Systems
 #########################################################################
@@ -982,6 +1038,10 @@ CPU87_ROMBOOT_config: unconfig
 	fi; \
 	echo "export CONFIG_BOOT_ROM" >> config.mk;
 
+ep8248_config	\
+ep8248E_config	:	unconfig
+	@./mkconfig ep8248 ppc mpc8260 ep8248
+
 ep8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ep8260
 
@@ -1171,6 +1231,9 @@ ZPC1900_config: unconfig
 ## Coldfire
 #########################################################################
 
+cobra5272_config :		unconfig
+	@./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+
 M5272C3_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
 
@@ -1180,6 +1243,16 @@ M5282EVB_config :		unconfig
 TASREG_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
 
+#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
+TQM834x_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx tqm834x
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
@@ -1187,18 +1260,44 @@ TASREG_config :		unconfig
 MPC8540ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
 
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config:      unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "... 33 MHz PCI" ; \
+	else \
+		echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+		echo -n "... 66 MHz PCI" ; \
+	fi ; \
+	if [ "$(findstring _slave_,$@)" ] ; then \
+		echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+		echo " slave" ; \
+	else \
+		echo " host" ; \
+	fi
+	@./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
 MPC8560ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
 
 MPC8541CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
 
+MPC8548CDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
 MPC8555CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
 
 PM854_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx pm854
 
+PM856_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm856
+
 sbc8540_config \
 sbc8540_33_config \
 sbc8540_66_config:	unconfig
@@ -1226,11 +1325,19 @@ sbc8560_66_config:      unconfig
 stxgp3_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
 
-TQM8540_config:      unconfig
+TQM8540_config		\
-	@./mkconfig $(@:_config=) ppc mpc85xx tqm8540
+TQM8541_config		\
-
+TQM8555_config		\
 TQM8560_config:		unconfig
-	@./mkconfig $(@:_config=) ppc mpc85xx tqm8560
+	@CTYPE=$(subst TQM,,$(@:_config=)); \
+	>include/config.h ; \
+	echo "... TQM"$${CTYPE}; \
+	echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \
+	echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \
+	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \
+	echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \
+	echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h
+	@./mkconfig -a TQM85xx ppc mpc85xx tqm85xx
 
 #########################################################################
 ## 74xx/7xx Systems
@@ -1306,11 +1413,41 @@ at91rm9200dk_config	:	unconfig
 cmc_pu2_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
 
-integratorap_config :	unconfig
+csb637_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs integratorap
+	@./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200
 
-integratorcp_config :	unconfig
+mp2usb_config	:	unconfig
-	@./mkconfig $(@:_config=) arm arm926ejs integratorcp
+	@./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+
+
+########################################################################
+## ARM Integrator boards - see doc/README-integrator for more info.
+integratorap_config	\
+ap_config		\
+ap966_config		\
+ap922_config		\
+ap922_XA10_config	\
+ap7_config		\
+ap720t_config  		\
+ap920t_config		\
+ap926ejs_config		\
+ap946es_config: unconfig
+	@board/integratorap/split_by_variant.sh $@
+
+integratorcp_config	\
+cp_config		\
+cp920t_config		\
+cp926ejs_config		\
+cp946es_config		\
+cp1136_config		\
+cp966_config		\
+cp922_config		\
+cp922_XA10_config	\
+cp1026_config: unconfig
+	@board/integratorcp/split_by_variant.sh $@
+
+kb9202_config	:	unconfig
+	@./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200
 
 lpd7a400_config \
 lpd7a404_config:	unconfig
@@ -1400,8 +1537,13 @@ trab_old_config:	unconfig
 VCMA9_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
 
-versatile_config :	unconfig
+#========================================================================
-	@./mkconfig $(@:_config=) arm arm926ejs versatile
+# ARM supplied Versatile development boards
+#========================================================================
+versatile_config	\
+versatileab_config	\
+versatilepb_config :	unconfig
+	@board/versatile/split_by_variant.sh $@
 
 voiceblue_smallflash_config	\
 voiceblue_config:	unconfig
@@ -1433,6 +1575,9 @@ B2_config	:	unconfig
 ## ARM720T Systems
 #########################################################################
 
+armadillo_config:	unconfig
+	@./mkconfig $(@:_config=) arm arm720t armadillo
+
 ep7312_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm720t ep7312
 
@@ -1473,6 +1618,9 @@ lubbock_config	:	unconfig
 logodl_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa logodl
 
+pxa255_idp_config:	unconfig
+	@./mkconfig $(@:_config=) arm pxa pxa255_idp
+
 wepep250_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa wepep250
 
@@ -1563,7 +1711,12 @@ dbau1550_config		:	unconfig
 dbau1550_el_config	:	unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_DBAU1550 1" >>include/config.h
-	@./mkconfig -a dbau1x00 mips mips dbau1x00 "" little
+	@./mkconfig -a dbau1x00 mips mips dbau1x00
+
+pb1000_config		: 	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_PB1000 1" >>include/config.h
+	@./mkconfig -a pb1x00 mips mips pb1x00
 
 #########################################################################
 ## MIPS64 5Kc
@@ -1677,7 +1830,8 @@ clean:
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
-	rm -f board/trab/trab_fkt
+	rm -f board/trab/trab_fkt board/voiceblue/eeprom
+	rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
 
 clobber:	clean
 	find . -type f \( -name .depend \

README

@@ -145,7 +145,7 @@ Directory Hierarchy:
   - mpc85xx	Files specific to Freescale MPC85xx CPUs
   - nios	Files specific to Altera NIOS CPUs
   - nios2	Files specific to Altera Nios-II CPUs
-  - ppc4xx	Files specific to IBM PowerPC 4xx CPUs
+  - ppc4xx	Files specific to AMCC PowerPC 4xx CPUs
   - pxa		Files specific to Intel XScale PXA CPUs
   - s3c44b0	Files specific to Samsung S3C44B0 CPUs
   - sa1100	Files specific to Intel StrongARM SA1100 CPUs
@@ -261,51 +261,53 @@ The following options need to be configured:
 		PowerPC based boards:
 		---------------------
 
-		CONFIG_ADCIOP		CONFIG_GEN860T		CONFIG_PCI405
+		CONFIG_ADCIOP		CONFIG_GEN860T		CONFIG_PCIPPC2
-		CONFIG_ADS860		CONFIG_GENIETV		CONFIG_PCIPPC2
+		CONFIG_ADS860		CONFIG_GENIETV		CONFIG_PCIPPC6
-		CONFIG_AMX860		CONFIG_GTH		CONFIG_PCIPPC6
+		CONFIG_AMX860		CONFIG_GTH		CONFIG_pcu_e
-		CONFIG_AR405		CONFIG_gw8260		CONFIG_pcu_e
+		CONFIG_AP1000		CONFIG_gw8260		CONFIG_PIP405
-		CONFIG_BAB7xx		CONFIG_hermes		CONFIG_PIP405
+		CONFIG_AR405		CONFIG_hermes		CONFIG_PM826
-		CONFIG_c2mon		CONFIG_hymod		CONFIG_PM826
+		CONFIG_BAB7xx		CONFIG_hymod		CONFIG_ppmc8260
-		CONFIG_CANBT		CONFIG_IAD210		CONFIG_ppmc8260
+		CONFIG_c2mon		CONFIG_IAD210		CONFIG_QS823
-		CONFIG_CCM		CONFIG_ICU862		CONFIG_QS823
+		CONFIG_CANBT		CONFIG_ICU862		CONFIG_QS850
-		CONFIG_CMI		CONFIG_IP860		CONFIG_QS850
+		CONFIG_CCM		CONFIG_IP860		CONFIG_QS860T
-		CONFIG_cogent_mpc8260	CONFIG_IPHASE4539	CONFIG_QS860T
+		CONFIG_CMI		CONFIG_IPHASE4539	CONFIG_RBC823
-		CONFIG_cogent_mpc8xx	CONFIG_IVML24		CONFIG_RBC823
+		CONFIG_cogent_mpc8260	CONFIG_IVML24		CONFIG_RPXClassic
-		CONFIG_CPCI405		CONFIG_IVML24_128	CONFIG_RPXClassic
+		CONFIG_cogent_mpc8xx	CONFIG_IVML24_128	CONFIG_RPXlite
-		CONFIG_CPCI4052		CONFIG_IVML24_256	CONFIG_RPXlite
+		CONFIG_CPCI405		CONFIG_IVML24_256	CONFIG_RPXsuper
-		CONFIG_CPCIISER4	CONFIG_IVMS8		CONFIG_RPXsuper
+		CONFIG_CPCI4052		CONFIG_IVMS8		CONFIG_rsdproto
-		CONFIG_CPU86		CONFIG_IVMS8_128	CONFIG_rsdproto
+		CONFIG_CPCIISER4	CONFIG_IVMS8_128	CONFIG_sacsng
-		CONFIG_CRAYL1		CONFIG_IVMS8_256	CONFIG_sacsng
+		CONFIG_CPU86		CONFIG_IVMS8_256	CONFIG_Sandpoint8240
-		CONFIG_CSB272		CONFIG_JSE		CONFIG_Sandpoint8240
+		CONFIG_CRAYL1		CONFIG_JSE		CONFIG_Sandpoint8245
-		CONFIG_CU824		CONFIG_LANTEC		CONFIG_Sandpoint8245
+		CONFIG_CSB272		CONFIG_LANTEC		CONFIG_sbc8260
-		CONFIG_DASA_SIM		CONFIG_lwmon		CONFIG_sbc8260
+		CONFIG_CU824		CONFIG_lwmon		CONFIG_sbc8560
-		CONFIG_DB64360		CONFIG_MBX		CONFIG_sbc8560
+		CONFIG_DASA_SIM		CONFIG_MBX		CONFIG_SM850
-		CONFIG_DB64460		CONFIG_MBX860T		CONFIG_SM850
+		CONFIG_DB64360		CONFIG_MBX860T		CONFIG_SPD823TS
-		CONFIG_DU405		CONFIG_MHPC		CONFIG_SPD823TS
+		CONFIG_DB64460		CONFIG_MHPC		CONFIG_STXGP3
-		CONFIG_DUET_ADS		CONFIG_MIP405		CONFIG_STXGP3
+		CONFIG_DU405		CONFIG_MIP405		CONFIG_SXNI855T
-		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
+		CONFIG_DUET_ADS		CONFIG_MOUSSE		CONFIG_TQM823L
-		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
+		CONFIG_EBONY		CONFIG_MPC8260ADS	CONFIG_TQM8260
-		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
+		CONFIG_ELPPC		CONFIG_MPC8540ADS	CONFIG_TQM850L
-		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
+		CONFIG_ELPT860		CONFIG_MPC8540EVAL	CONFIG_TQM855L
-		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
+		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM860L
-		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
+		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TTTech
-		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
+		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_UTX8245
-		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
+		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_V37
-		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
+		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_W7OLMC
-		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
+		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_W7OLMG
-		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
+		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_WALNUT
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
+		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_ZPC1900
-		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
+		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_ZUMA
-		CONFIG_FPS860L					CONFIG_ZUMA
+		CONFIG_FPS850L		CONFIG_OXC
+		CONFIG_FPS860L		CONFIG_PCI405
 
 		ARM based boards:
 		-----------------
 
-		CONFIG_AT91RM9200DK,	CONFIG_CERF250,		CONFIG_DNP1110,
+		CONFIG_ARMADILLO,	CONFIG_AT91RM9200DK,	CONFIG_CERF250,
-		CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
+		CONFIG_CSB637,		CONFIG_DNP1110, 	CONFIG_EP7312,
-		CONFIG_IMPA7,		CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,	CONFIG_IMPA7,
-		CONFIG_LART,		CONFIG_LPD7A400		CONFIG_LUBBOCK,
+		CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_KB9202,
+		CONFIG_LART,		CONFIG_LPD7A400,	CONFIG_LUBBOCK,
 		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,	CONFIG_SHANNON,
 		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,	CONFIG_SMDK2410,
 		CONFIG_TRAB,		CONFIG_VCMA9
@@ -397,6 +399,20 @@ The following options need to be configured:
 		expect it to be in bytes, others in MB.
 		Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
 
+		CONFIG_OF_FLAT_TREE
+
+		New kernel versions are expecting firmware settings to be
+		passed using flat open firmware trees.
+		The environment variable "disable_of", when set, disables this
+		functionality.
+
+		CONFIG_OF_FLAT_TREE_MAX_SIZE
+
+		The maximum size of the constructed OF tree.
+
+		OF_CPU - The proper name of the cpus node.
+		OF_TBCLK - The timebase frequency.
+
 - Serial Ports:
 		CFG_PL010_SERIAL
 
@@ -497,7 +513,7 @@ The following options need to be configured:
 - Console UART Number:
 		CONFIG_UART1_CONSOLE
 
-		IBM PPC4xx only.
+		AMCC PPC4xx only.
 		If defined internal UART1 (and not UART0) is used
 		as default U-Boot console.
 
@@ -960,6 +976,12 @@ The following options need to be configured:
 		allows for a "silent" boot where a splash screen is
 		loaded very quickly after power-on.
 
+- Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
+
+		If this option is set, additionally to standard BMP
+		images, gzipped BMP images can be displayed via the
+		splashscreen support or the bmp command.
+
 - Compression support:
 		CONFIG_BZIP2
 
@@ -1355,7 +1377,7 @@ The following options need to be configured:
 		remaining RAM in a form that can be passed as boot
 		argument to Linux, for instance like that:
 
-			setenv bootargs ... mem=\$(mem)
+			setenv bootargs ... mem=\${mem}
 			saveenv
 
 		This way you can tell Linux not to use this memory,
@@ -1481,6 +1503,26 @@ The following options need to be configured:
 		When SystemACE support is added, the "ace" device type
 		becomes available to the fat commands, i.e. fatls.
 
+- TFTP Fixed UDP Port:
+		CONFIG_TFTP_PORT
+
+		If this is defined, the environment variable tftpsrcp
+		is used to supply the TFTP UDP source port value.
+		If tftpsrcp isn't defined, the normal pseudo-random port
+		number generator is used.
+
+		Also, the environment variable tftpdstp is used to supply
+		the TFTP UDP destination port value.  If tftpdstp isn't
+		defined, the normal port 69 is used.
+
+		The purpose for tftpsrcp is to allow a TFTP server to
+		blindly start the TFTP transfer using the pre-configured
+		target IP address and UDP port. This has the effect of
+		"punching through" the (Windows XP) firewall, allowing
+		the remainder of the TFTP transfer to proceed normally.
+		A better solution is to properly configure the firewall,
+		but sometimes that is not allowed.
+
 - Show boot progress:
 		CONFIG_SHOW_BOOT_PROGRESS
 
@@ -1724,6 +1766,12 @@ Configuration Settings:
 		This option also enables the building of the cfi_flash driver
 		in the drivers directory
 
+- CFG_FLASH_QUIET_TEST
+		If this option is defined, the common CFI flash doesn't
+		print it's warning upon not recognized FLASH banks. This
+		is useful, if some of the configured banks are only
+		optionally available.
+
 - CFG_RX_ETH_BUFFER:
 		Defines the number of ethernet receive buffers. On some
 		ethernet controllers it is recommended to set this value
@@ -2186,14 +2234,14 @@ configurations; the following names are supported:
 	DUET_ADS_config		MBX_config		sbc8560_66_config
 	EBONY_config		MPC8260ADS_config	SM850_config
 	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
+	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
-	ETX094_config		NETVIA_config		SXNI855T_config
+	ETX094_config		MPC8560ADS_config	SXNI855T_config
-	FADS823_config		omap1510inn_config	TQM823L_config
+	FADS823_config		NETVIA_config		TQM823L_config
-	FADS850SAR_config	omap1610h2_config	TQM850L_config
+	FADS850SAR_config	omap1510inn_config	TQM850L_config
-	FADS860T_config		omap1610inn_config	TQM855L_config
+	FADS860T_config		omap1610h2_config	TQM855L_config
-	FPS850L_config		omap5912osk_config	TQM860L_config
+	FPS850L_config		omap1610inn_config	TQM860L_config
-				omap2420h4_config	WALNUT405_config
+				omap5912osk_config	walnut_config
-							Yukon8220_config
+				omap2420h4_config	Yukon8220_config
 							ZPC1900_config
 
 Note: for some board special configuration names may exist; check if
@@ -2446,6 +2494,12 @@ Some configuration options can be set using Environment Variables:
 		  Useful on scripts which control the retry operation
 		  themselves.
 
+  tftpsrcport	- If this is set, the value is used for TFTP's
+		  UDP source port.
+
+  tftpdstport	- If this is set, the value is used for TFTP's UDP
+		  destination port instead of the Well Know Port 69.
+
    vlan		- When set to a value < 4095 the traffic over
 		  ethernet is encapsulated/received over 802.1q
 		  VLAN tagged frames.
@@ -2498,10 +2552,10 @@ Old, simple command line parser:
 
 - supports environment variables (through setenv / saveenv commands)
 - several commands on one line, separated by ';'
-- variable substitution using "... $(name) ..." syntax
+- variable substitution using "... ${name} ..." syntax
 - special characters ('$', ';') can be escaped by prefixing with '\',
   for example:
-	setenv bootcmd bootm \$(address)
+	setenv bootcmd bootm \${address}
 - You can also escape text by enclosing in single apostrophes, for example:
 	setenv addip 'setenv bootargs $bootargs ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off'
 
@@ -3135,7 +3189,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in

board/AtmarkTechno/suzaku/u-boot.lds

@@ -51,6 +51,7 @@ SECTIONS
 
 	.u_boot_cmd ALIGN(0x4):
 	{
+		. = .;
 		__u_boot_cmd_start = .;
 		*(.u_boot_cmd)
 		__u_boot_cmd_end = .;

board/LEOX/elpt860/README.LEOX

@@ -124,9 +124,9 @@ nfsserverip=192.168.0.1
 preboot=echo;echo Type "run nfsboot" to mount root filesystem over NFS;echo
 gatewayip=192.168.0.1
 ramargs=setenv bootargs root=/dev/ram rw
-rootargs=setenv rootpath /tftp/$(ipaddr)
+rootargs=setenv rootpath /tftp/${ipaddr}
-nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(nfsserverip):$(rootpath)
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${nfsserverip}:${rootpath}
-addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(nfsserverip):$(gatewayip):$(netmask):$(hostname):eth0:
+addip=setenv bootargs ${bootargs} ip=${ipaddr}:${nfsserverip}:${gatewayip}:${netmask}:${hostname}:eth0:
 ramboot=tftp 400000 /home/leox/pMulti;run ramargs;bootm
 nfsboot=tftp 400000 /home/leox/uImage;run rootargs;run nfsargs;run addip;bootm
 bootcmd=run ramboot

board/LEOX/elpt860/elpt860.c

@@ -169,7 +169,7 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	unsigned char *s = getenv ("serial#");
+	char *s = getenv ("serial#");
 
 	if (!s || strncmp (s, "ELPT860", 7))
 		printf ("### No HW ID - assuming ELPT860\n");
@@ -253,7 +253,7 @@ long int initdram (int board_type)
 	 * try 8 column mode
 	 */
 	size8 = dram_size (CFG_MAMR_8COL,
-			   (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
 
 	udelay (1000);
 
@@ -261,7 +261,7 @@ long int initdram (int board_type)
 	 * try 9 column mode
 	 */
 	size9 = dram_size (CFG_MAMR_9COL,
-			   (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
+			   SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE);
 
 	if (size8 < size9) {	/* leave configuration at 9 columns       */
 		size_b0 = size9;

board/LEOX/elpt860/u-boot.lds

@@ -91,6 +91,7 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -123,10 +124,12 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;

board/LEOX/elpt860/u-boot.lds.debug

@@ -83,6 +83,8 @@ SECTIONS
   {
     *(.rodata)
     *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }

board/MAI/AmigaOneG3SE/ps2kbd.c

@@ -656,7 +656,7 @@ char * kbd_initialize(void)
 			      | KBD_MODE_DISABLE_MOUSE
 			      | KBD_MODE_KCC);
 
-	/* ibm powerpc portables need this to use scan-code set 1 -- Cort */
+	/* AMCC powerpc portables need this to use scan-code set 1 -- Cort */
 	kbd_write_command_w(KBD_CCMD_READ_MODE);
 	if (!(kbd_wait_for_input() & KBD_MODE_KCC)) {
 		/*

board/MAI/AmigaOneG3SE/u-boot.lds

@@ -76,6 +76,7 @@ SECTIONS
     *(.rodata)
     *(.rodata1)
     *(.rodata.str1.4)
+    *(.eh_frame)
   }
   .fini      : { *(.fini)    } =0
   .ctors     : { *(.ctors)   }
@@ -108,11 +109,13 @@ SECTIONS
   _edata  =  .;
   PROVIDE (edata = .);
 
+  . = .;
   __u_boot_cmd_start = .;
   .u_boot_cmd : { *(.u_boot_cmd) }
   __u_boot_cmd_end = .;
 
 
+  . = .;
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;