For some newer SoCs like RK3568, the Rockchip has not released
any DDR drivers yet so idbloader needs to create manually using
DDR binaries offered by rkbin. This indeed no requirement to
enable TPL in the U-Boot source code.
If we mark TPL disabled and mark BINMAN enabled by default then
there would be an issue of binman_init failure during board
relocation. This is true as binman failed to find the top-level
node like u-boot-tpl here.
Here is the boot issue observed in Radxa-CM3 RK3566 board,
U-Boot 2023.01-rc4-00057-gac2505d463-dirty (Jan 04 2023 - 23:44:18 +0530)
Model: Radxa Compute Module 3(CM3) IO Board
DRAM: 2 GiB
binman_init failed:-2
initcall sequence 000000007ffd2008 failed at call 0000000000a18cac (err=-2)
### ERROR ### Please RESET the board ###
This might be fixed via binman node in rockchip-u-boot.dtsi however
disable BINMAN_FDT for evb-rk3568 defconfig for now as we are at the
end of the release cycle.
Fixes: 05713d5707 ("rockchip: generate u-boot-rockchip.bin with binman
for ARM64 boards")
Cc: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The "SCRIPT FAILED" string is copied from scan_dev_for_scripts script,
update it so it prints "EXTLINUX FAILED" instead in scan_dev_for_extlinux
script.
Signed-off-by: Marek Vasut <marex@denx.de>
In some cases, we might not have the sic portion of setuputils
available. Make our import and use of this be done in try/except blocks
as this is done to suppress a run-time warning that is otherwise
non-fatal.
Reported-by: Pali Rohár <pali@kernel.org>
Fixes: 1416591876 ("pylibfdt: Fix disable version normalization")
Signed-off-by: Tom Rini <trini@konsulko.com>
This reverts commit 777aaaa706 ("common/memsize.c: Fix
get_effective_memsize() to check for overflow") for non-mpc85xx platforms.
The changes to this generic function, which is intended to help with
32bit platforms with large amounts of memory has unintended side effects
(which in turn lead to boot failures) on other platforms which were
previously functional.
For now do overflow check only for powerpc mpc85xx platform. It is needed
to prevent crashing of P1/P2 boards with 4GB DDR module in 32-bit mode.
Fixes: 777aaaa706 ("common/memsize.c: Fix get_effective_memsize() to check for overflow")
Signed-off-by: Pali Rohár <pali@kernel.org>
UEFI:
* correct the vexpress loaddr which collides with memory used by EFI
* consider the EFI memory map for LMB memory reservation
* avoid RWX section warnings for .data section of *_efi.so files
-----BEGIN PGP SIGNATURE-----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=t3Y+
-----END PGP SIGNATURE-----
Merge tag 'efi-2023-01-rc5-4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2023-01-rc5-4
UEFI:
* correct the vexpress loaddr which collides with memory used by EFI
* consider the EFI memory map for LMB memory reservation
* avoid RWX section warnings for .data section of *_efi.so files
When building with binutils 2.39 warnings
*_efi.so has a LOAD segment with RWX permissions
occur.
Use SHF_WRITE | SHF_ALLOC as section flags for the .data section.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
On the vexpress_ca9x4 $loadaddr points to a memory area used by the EFI
sub-system. Use the same value as $kernel_addr_r which is safe.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
commit 777aaaa706 ("common/memsize.c: Fix get_effective_memsize() to check
for overflow") because the effective DDR effective size is reduce by 4KiB
and sometime the board hang on boot
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmO3+ZUACgkQ4rK92eCq
k3VHfQf9Fd9zjv8ljJoTW4IHjh0hW4M7KJJ44OplpxgLBKy9lO1LCGxF3V5EAdGM
yBQsRfAjBKiTx8bM7d30dZ2SbQOMjVgbI+VDYI1Pyzzo6wkmrc5uKj16/1Zt9FbR
M26ftJ07uT4hOinD2WXhD4LKH9oMM4p7d03P1q4PPbFPR5+37UEU01fLlCH+SW0R
ajUVPdG+2Pn8g6+rjfVo27dZPi02PBVe8ODvEt63hwMkXqcfHFGMlP4d9vIrArcH
Q9vt1YeyaK+lQdpvctTaH2iw13JtJKpJZxsw63sMOU3+PWFneIKD0gSUKGWrKRnI
kfIKfSU4mJB2+Xeq+2M7O5nLYXT9kA==
=OFHo
-----END PGP SIGNATURE-----
Merge tag 'u-boot-stm32-20230106' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm
- stm32mp: Fix board_get_usable_ram_top(): workaround to avoid issue after the
commit 777aaaa706 ("common/memsize.c: Fix get_effective_memsize() to check
for overflow") because the effective DDR effective size is reduce by 4KiB
and sometime the board hang on boot
- Bring in a number of important regression fixes for among others,
uniphier, PXE booting, socrates, imx7d-pico, rockchip video and
rzg2_beacon as well as making the python version warning fix more
portable.
Due to the part shortage, the AR8031 PHY was replaced with a
Micrel KSZ9131. Enabling both config options keeps backward
compatibility with either platform, and both appear to be
auto-detected.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
The QSPI is accessed via the RPC-IF, but the compatible flags
previously used a different name. This compatibel name was changed
which broke the ability to access the QSPI. Fix this by removing
the custom naming reference.
Fixes: 68083b897b ("renesas: Fix RPC-IF compatible values")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@gmail.com>
On Arch Linux based systems python setuptools does not contain
"setuptools.extern" hence it is failing with the following
error-message:
"
ModuleNotFoundError: No module named 'setuptools.extern'
"
According to a eschwartz `setuptools.extern` is not a public API and
shall not be assumed to be present in the setuptools package. He
mentions that the setuptools project anyway wants to drop this. [1]
Use the correct solution introduced by python setuptools developers to
disable normalization. [2]
[1] https://bbs.archlinux.org/viewtopic.php?id=259608
[2] https://github.com/pypa/setuptools/pull/2026
Fixes: 440098c42e ("pylibfdt: Fix version normalization warning")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Commit d5ba6188df ("cmd: pxe_utils: Check fdtcontroladdr in label_boot")
forces '$fdtcontroladdr' DT address as a third parameter of bootm command
even if the PXE transfer pulls in a fitImage which contains configuration
node with its own DT that is preferrable to be passed to Linux. Limit the
$fdtcontroladdr fallback utilization to non-fitImages, since it is highly
likely a fitImage would come with its own DT, while single-file images do
need a separate DT.
Fixes: d5ba6188df ("cmd: pxe_utils: Check fdtcontroladdr in label_boot")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Tested-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Peter Hoyes <peter.hoyes@arm.com>
Tested-by: Peter Hoyes <peter.hoyes@arm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
This reverts commit ed6251187a.
Superseded by "cmd: pxe_utils: Limit fdtcontroladdr usage to non-fitImage"
which is less heavy-handed approach and retains part of the original
behavior for non-fitImage.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Video out on RK3288 boards has been broken since from few
releases due to the adding of reset support on vop but
missed enabling DM_RESET on associated boards.
This patch fixes those RK3288 boards.
Cc: Simon Glass <sjg@chromium.org>
Cc: Lin Huang <hl@rock-chips.com>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Fixes: <9749d2ea29e1> ("rockchip: video: vop: Add reset support")
Reported-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The uniphier i2c block can recognize some handshake errors.
But driver handles all error detections as no error if no timeout.
So this makes unrecoverable state.
This replaces the return values with the right ones to tell the i2c
framework the errors:
- EDEADLK for arbitration lost error
- ENODATA for no answer error
Signed-off-by: Dai Okamura <okamura.dai@socionext.com>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Since commit 2f96d4dd95 ("imx7s/d: synchronise device trees with linux")
the imx7d-pico board no longer boots.
The reason is that prior to the above commit there was an explicit
inclusion of arch/arm/dts/imx7d-pico-u-boot.dtsi inside imx7d-pico.dtsi.
After the syncing with the Linux upstream dtsi, this u-boot.dtsi inclusion
is gone and the board fails to boot.
U-Boot uses the imx7d-pico-pi.dtb file, so rename the u-boot.dtsi to
imx7d-pico-pi-u-boot.dtsi which gets included automatically by U-Boot
standard make logic and makes the board boot again.
Signed-off-by: Fabio Estevam <festevam@denx.de>
U-Boot build system builds final U-Boot binary for socrates board in custom
file u-boot-socrates.bin (instead of standard u-boot.bin). Output target
file u-boot-socrates.bin is generated by binman as defined in board binman
config file arch/powerpc/dts/socrates-u-boot.dtsi.
But binman was disabled in commit 5af42eafd7 ("Makefile: Reduce usage of
custom mpc85xx u-boot.bin target") for all mpc85xx boards which do not use
standard powerpc binman config file arch/powerpc/dts/u-boot.dtsi and boards
which do not require binman at all.
The only such mpc85xx board is socrates. So since that commit, U-Boot does
not final binary for socrates board anymore.
Fix this issue by re-enabling binman for socrates board. And build process
starts again producing u-boot-socrates.bin binary.
Note that build process for this socrates board always produce u-boot.bin
binary which is broken and not usable for socrates board. Long term
solution should be to disable building broken binary u-boot.bin and then
renaming u-boot-socrates.bin to u-boot.bin, or switching to use common
powerpc binman config file arch/powerpc/dts/socrates-u-boot.dtsi (if it is
possible).
Fixes: 5af42eafd7 ("Makefile: Reduce usage of custom mpc85xx u-boot.bin target")
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Heiko Schocher <hs@denx.de>
Do not access gd->ram_size and assume this is actual valid RAM size. Since commit
777aaaa706 ("common/memsize.c: Fix get_effective_memsize() to check for overflow")
the RAM size may be less than gd->ram_size , call get_effective_memsize() to get
the limited value instead.
The aforementioned commit makes STM32MP15xx boards with 1 GiB of DRAM
at 0xc0000000 hang on boot, which is a grave defect.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Documentation:
* Describe building documentation
UEFI:
* Add .data section to aarch64 EFI binaries and correct section flags
* Correct sorting of capsules when updating
* Populate console handles in system table
Other:
* Fix description of eth_env_[gs]et_enetaddr() return value
* Avoid endless loop in sound play command
-----BEGIN PGP SIGNATURE-----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=ItVV
-----END PGP SIGNATURE-----
Merge tag 'efi-2023-01-rc5-3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2023-01-rc5-3
Documentation:
* Describe building documentation
UEFI:
* Add .data section to aarch64 EFI binaries and correct section flags
* Correct sorting of capsules when updating
* Populate console handles in system table
Other:
* Fix description of eth_env_[gs]et_enetaddr() return value
* Avoid endless loop in sound play command
The fields ConsoleInHandle, ConsoleOutHandle, ConsoleErrHandle must point
to the handles with the respective console protocols. Failure to do so
leads to an error in the EFI Shell:
No SimpleTextInputEx was found. CTRL-based features are not usable.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Up to now we only compared the first letter of the capsule name to sort
them alphabetically. Properly sort by the Unicode alphabet.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
While our EFI binaries execute without problems on EDK II they crash on
a Lenovo X13s. Let our binaries look more like what EDK II produces:
* move all writable data to a .data section
* align sections to 4 KiB boundaries (matching EFI page size)
* remove IMAGE_SCN_LNK_NRELOC_OVFL from .reloc section flags
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Provide constants for the section flags used by binaries.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Per env/common.c, eth_env_get_enetaddr() returns the same return
values as is_valid_ethaddr(), i.e. true if valid, false otherwise.
Per env/common.c, eth_env_set_enetaddr() may return -EEXIST is the
ethaddr is already set. Fix both.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
A parameter starting with a hyphen leads to an endless loop in the sound
play command.
Leave it to dectoul() to handle the hyphen. It will return 0 for a negative
number.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
We've noticed that at least one Kirkwood board (Pogo v4) has problems
with the new orion DM timer implementation. Debugging revealed that this
issue is related with the static variable "early_init_done" which does
not work correctly before relocation in all cases.
This patch removes this static variable and replaces it's functionality
via a function that detects if the timer is already initialized.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Pali Rohár <pali@kernel.org>
Cc: Michael Walle <michael@walle.cc>
Cc: Tony Dinh <mibodhi@gmail.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Documentation:
* Reorganize existing TI docs and add K3 generation page
* Add texinfodocs and infodocs targets
* Update qemu-ppce500 documentation
* Use "changesets" not "csets" in statistics pages
UEFI
* Fix merging of preseeded non-volatile variables
* Fix a return value in the EFI_HII_DATABASE_PROTOCOL
* Set UEFI specification version to 2.10
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEbcT5xx8ppvoGt20zxIHbvCwFGsQFAmOtm18ACgkQxIHbvCwF
GsQMJQ//Zfr8kaJQbHRBcA/20LvdMuJj5l1IBW3sQbfr2jRztrkA/Ea23k4T8lHK
f+Ty1CGDPi5LtdIKrDJDxNF1KDFOUIGgBZ4i+ISoLPazCj9Cug/58GCZM/htO25/
sFqojKNUVYOLBZ/D3PZBDU42hWTH0do1MwyUNuwVu0KPe6uwUrMFRBcSddXQw77r
45iotAPe54hL7lzcNfEJSjeSSZ0CfGAsE+8ZN2r7xBTcU2ACOD6DbcCQgeR8FGEv
CwzKU/3wKNLtonxfFmK44FI6knIxl/B3HKzi82gBDOmvlB4bmB8X+CK82WvJ+Q+j
9H/6bqj6ZaEKkJ7k1KbhR/cf6Z4QbRwScb82H2YfhjhiAj6UeoPCTI6lgx7WGkxW
DP8wNej0kE0wxWuoiay5ErRU17hPItpwQIbrCBMpnJrEPTour6yjGpJYcbUeGqW2
5gw++0rsyn1rOlH/+ukK0Gzq6DSUE9LuCnl76qG6Vwyuj1e1JO2G9Sr/rxiX5XDx
5h/LoVmhD2yYSSG7MtKNlj38yfnOu1267PSWvQYyLs9XKSnhecT/N4OKMwTmEe1o
VO8MapuUaw2mzO3NzlDLKXHzMavN2ov+YWWA+9NiFiytjXFvOsPnMVZJXeR86RI/
Npeu+7jIbQOtSFDQyuV0tGXGZSY5F5WHsXFdwJHkFQGSYhWDwXU=
=z7b8
-----END PGP SIGNATURE-----
Merge tag 'efi-2023-01-rc5-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2023-01-rc5-2
Documentation:
* Reorganize existing TI docs and add K3 generation page
* Add texinfodocs and infodocs targets
* Update qemu-ppce500 documentation
* Use "changesets" not "csets" in statistics pages
UEFI
* Fix merging of preseeded non-volatile variables
* Fix a return value in the EFI_HII_DATABASE_PROTOCOL
* Set UEFI specification version to 2.10
In 96699f097a ("powerpc: mpc85xx: Use binman to embed dtb inside
U-Boot") we introduce CONFIG_MPC85XX_HAVE_RESET_VECTOR and do so via
Kconfig. However, much later in de47ff5363 ("Convert
CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") I converted the symbol that
is the inverse of this to Kconfig. This should have included a
dependency on the first symbol as they are logically opposite.
The dependency being missing lead to some platforms being broken at
runtime due to discarding the require reset vector.
Fixes: de47ff5363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig")
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Pali Rohár <pali@kernel.org>
When converting CONFIG_SDCARD and CONFIG_SPIFLASH to Kconfig, one set of
uses wasn't converted correctly. Allow for the case where platforms
don't rely on "PBL" to boot but instead use other mechanisms. See the
link below for more details.
Link: https://lore.kernel.org/all/20220802091338.f4g45ldhc7qbg6hm@pali/
Fixes: d433c74eec ("Convert CONFIG_SDCARD et al to Kconfig")
Tested-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The wget command uses TCP, but fails to select PROT_TCP in Kconfig.
Instead it selects the non-existing symbol TCP. Fix the typo.
Signed-off-by: Michael Walle <michael@walle.cc>
The compiler complains about the missing declaration of print_size():
net/wget.c:415:3: warning: implicit declaration of function ‘print_size’ [-Wimplicit-function-declaration]
Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
The rockchip job is getting close to the hard time limit in Azure for
the free tier. Split this in to 32bit and 64bit board jobs.
Signed-off-by: Tom Rini <trini@konsulko.com>
When the efi subsystem starts we restore variables that are both in a
file or stored into the .efi_runtime section of U-Boot. However once
a variable gets created or changed the preseeded entries will end up in
the file. As a consequence on the next boot we will end up adding
identical variable entries twice.
Fix this by checking if the to be inserted variable already exists.
Also swap the restoration order and start with the file instead of the
builtin variables, so a user can replace the preseeded ones if needed.
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It is volatile variables that we do not allow to be restored from file.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
For the 64bit EFI binaries that we create set the
IMAGE_FILE_LARGE_ADDRESS_AWARE characteristic in the PE-COFF header
to indicate that they can handle addresses above 2 GiB.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
When the HII protocol function get_package_list_handle() is called with an
invalid package list handle, it returns EFI_NOT_FOUND but this is not in
its list of possible status codes as per the EFI specification.
Return EFI_INVALID_PARAMETER instead to fix conformance.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
To make things more human readable, say "changesets from" rather than
"csets from" in all our historical pages here. Moving forward this has
been changed in our gitdm with b034e399e31a ("gitdm: fix typo csets").
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
