Commit Graph
20360 Commits
Author SHA1 Message Date
Simon Glass 2c8ee30b97 video: Drop VIDEO_LOGO from cfb_console
This driver is obsolete and only used by nokia_rx51. It should be deleted.
For now, drop the VIDEO_LOGO code to avoid confusion with the new
implementation.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:25:29 +01:00
Simon Glass 64cfeda8ae video: Convert CONFIG_VIDEO_LOGO to Kconfig
This converts the following to Kconfig:
   CONFIG_VIDEO_LOGO

Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is
deprecated. The only relevant code is now in splash.c

Drop the check for DM_VIDEO in that file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:24:46 +01:00
Simon Glass cd4fb0f054 video: Drop #ifdefs from video_bmp
Convert the current preprocessor macros to C code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:24:29 +01:00
Simon Glass 4ea1548210 video: theadorable: Use RGB565 for BMP blitting
At present this uses RGB555 format for blitting to a display. Sandbox uses
565 and that seems to be more normal for BMP as well. Update the code
accordingly and add a test.

Note that this likely breaks the theadorable board so we may need to
discuss supporting both formats.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:23:52 +01:00
Simon Glass f5aa93eb53 video: Tidy up 24/32 BMP blitting
Drop the unnecessary brackets.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass ecb8b4f8f3 video: Drop the uclass colour map
We don't need this anymore since we use the BMP palette directly. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 646e169aa0 video: bmp: Update RLE8 support to use the write function
Update this code to use write_pix8() rather than writing the pixels only
for a single supported display depth. This allows us to support any
depth.

Add some more tests too.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 51f92c1430 video: Move BMP pixel-writing into a function
At present the code that writes to a pixel is quite convoluted. It uses a
colour map which is in the uclass and the same code is repeated in
different places within video_bmp_display().

As a first step, create a function which can write a pixel from the
bitmap, no matter what the display depth. Use any provided palette
directly, rather than using the uclass version.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 19c828c525 video: Drop fb_put_byte() el at
These functions are not used with driver model, nor in any U-Boot boards.
Drop them and inline the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 6a19e938f8 video: Expand video debugging buffer size
On sandbox these addresses are 16 hex digits log so we need more space
for the debug string. Update it.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 8657ad43f3 sandbox: video: Add BMP tests for 32bpp and 8bpp modes
Add a few more tests for BMP rendering. Use a back door into the sandbox
SDL driver to adjust the resolution at runtime.

The truetype code does not support 8bpp. Add this so that the display is
not blank when running in this mode.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 8405174391 sandbox: video: Correct the address of the copy base
The intention is for the copy base to start halfway through the
frame-buffer area. At present is it actually below the frame buffer,
which could have anything in it (probably it is malloc space). Fix
this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 301af2388a video: sandbox: Set a maximum frame-buffer size
If U-Boot starts with the frame buffer set to 16bpp but then runs a test
that uses 32bpp, there is not enough space. Update the driver to use the
maximum possible frame-buffer size, to avoid this.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 250e735c69 video: sandbox: Avoid duplicate display windows
When unit tests are run they currently create a new window. Update the
code so that the old one is removed first. This avoids the confusion as to
which one is active.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 0fe5e9481e sandbox: video: Support 8bpp depth
At present sandbox only supports 16 and 32bpp depths, since those are the
easy ones with SDL.

We can support other depths by manually converting the pixel formats. Add
support for this, to enable an 8ppp (monochrome) format.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-26 23:02:19 +01:00
Simon Glass 6476c4d981 dm: core: Allow getting some basic stats
Add a function that returns some basic stats about driver model. For now
we only have two.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-23 10:24:40 -05:00
Pali Rohár c68a73c559 pci: pci_mvebu: Remove unused DECLARE_GLOBAL_DATA_PTR
The global data pointer is not used in this driver, remove it's
declaration.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-21 07:42:01 +01:00
Pali Rohár e1cee89e28 pci: pci_mvebu: Replace MBUS_PCI_*_SIZE by resource_size()
Use more appropriate resource_size() function when working with data in
struct resource.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-21 07:40:26 +01:00
Pali Rohár 4a1a593d17 pci: pci_mvebu: Move setup for BAR[0] where other BARs are setup
Function mvebu_pcie_setup_wins() sets up all other BARs, so move setup of
BAR[0] to this function to have common code at one place.

In the past, commit 193a1e9f19 ("pci: pci_mvebu: set BAR0 after memory
space is set") moved setup of BAR[0] to another location, due to ath10k
not working in kernel, but the reason why was unknown, but it seems to
work now, and we think the issue then was cause by the PCIe Root Port
presenting itself as a Memory Controller and therefore U-Boot's code
have overwritten the BAR. Since the driver now ignores any write
operations to PCIe Root Port BARs, this should not be an issue anymore.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-21 07:40:26 +01:00
Tom Rini 4afab30cae Merge tag 'v2022.01-rc4' into next
Prepare v2022.01-rc4
2021-12-20 17:12:04 -05:00
Stefan Roese ccea46c05b i2c: mvtwsi: Swab the register address if its size is > 1
Testing on Armada XP with an EEPROM using register address with size
of 2 has shown, that the register address bytes are sent to the I2C
EEPROM in the incorrect order. This patch swabs the address bytes so
that the correct address is transferred to the I2C device.

BTW: This worked without any issues before migrating Armada XP to
DM I2C.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Pali Rohár <pali@kernel.org>
Cc: Marek Behún <marek.behun@nic.cz>
Tested-by: Marek Behún <marek.behun@nic.cz>
2021-12-20 07:57:48 +01:00
Pali Rohár c53a30f039 arm: mvebu: serial: Add me as co-maintainer and author of Marvell serial drivers
There is no maintainer entry for serial_mvebu_a3700.c. Add entry with Pali
and Stefan as maintainers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19 09:50:47 +01:00
Pali Rohár 22f69fc79b arm: mvebu: pci: Add me as co-maintainer and author of Marvell PCIe drivers
There is no maintainer entry for pci-aardvark.c. Add entry for
pci-aardvark.c and pci_mvebu.c with Pali and Stefan as maintainers.

Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19 09:50:47 +01:00
Pali Rohár d368e10705 phy: marvell: a3700: Convert to official DT bindings in COMPHY driver
Convert A3720 common PHY driver to official DT bindings.

This puts us closer to be able to synchronize A3720 device-trees with
those from Linux.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Konstantin Porotchkin <kostap@marvell.com>
Cc: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-19 09:50:47 +01:00
Marek Behún 2105cd0421 fdt_support: Remove FDT_STATUS_FAIL_ERROR_CODE
Since no one uses this feature and I am not aware of any parsers of this
in Linux, remove it.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Pratyush Yadav <p.yadav@ti.com>
Cc: Tim Harvey <tharvey@gateworks.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-12-19 09:50:47 +01:00
Marek Behún 68a2faa9bc treewide: Use fdt_create_phandle() where appropriate
Replace fdt_alloc_phandle() with subsequent fdt_set_phandle() by
fdt_create_phandle().

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Cc: Aaron Williams <awilliams@marvell.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
2021-12-19 09:50:47 +01:00
Stefan Roese 0cbd3d8121 arm: mvebu: axp: ddr: Switch to using DM I2C API
No functional change intended. This patch switches from the legacy I2C
API to the DM I2C API, so that this code can be used with DM I2C
enabled.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-12-19 09:50:47 +01:00
Stefan Roese 622882893d arm: mvebu: axp: Remove unreferenced ddr3_get_eprom_fabric() function
This function is not referenced in mainline U-Boot. Let's remove now.

Signed-off-by: Stefan Roese <sr@denx.de>
2021-12-19 09:50:47 +01:00
AKASHI Takahiro 19b241c61f blk: add a helper function, blk_probe_or_unbind()
This function will be commonly used in block device drivers
in the succeeding patches.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-18 12:05:19 +01:00
Tom Rini b9c9ce8a40 Merge tag 'u-boot-at91-2022.04-a' of https://source.denx.de/u-boot/custodians/u-boot-at91 into next
First set of u-boot-at91 features for the 2022.04 cycle:

This feature set includes : support for the new QSPI hardware on
sama7g5, small fixes on sam9x60 and sama7g5, some additions of commands
and PIO controller on sam9x60/sam9x60ek.
2021-12-17 07:25:34 -05:00
Tien Fong Chee 4720b83d2c arm: socfpga: arria10: Enable double peripheral RBF configuration
Double peripheral RBF configuration are needed on some devices or boards
to stabilize the IO configuration system.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Signed-off-by: Sin Hui Kho <sin.hui.kho@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
2021-12-17 12:58:01 +08:00
Tom Rini 5b20efeafe Merge tag 'clk-2022.01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-clk
Clock patches for v2022.01-rc3

This adds better logging support for many CCF drivers, and clarifies some
documentation regarding clk_get_rate.
2021-12-15 14:51:44 -05:00
Patrick Delaunay 560e1e0050 clk: define LOG_CATEGORY for generic and ccf clocks
Define LOG_CATEGORY to allow filtering with log command
for generic clock and CCF clocks.

This patch also change existing printf, debug and pr_ macro
to log_ or dev_ macro.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-12-15 12:16:16 -05:00
Patrick Delaunay 572c446e98 clk: cosmetic: reorder include files
Reorder include files in the U-Boot expected order:

the common.h header should always be first,
followed by other headers in order,
then headers with directories,
then local files.

It is a preliminary step for next patch.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
2021-12-15 12:16:16 -05:00
Pali Rohár fed5beca18 arm: a37xx: pci: Do not allow setting ROM BAR on PCI Bridge
PCI Bridge which represents aardvark PCIe Root Port has Expansion ROM Base
Address register at offset 0x30 but its meaning is different than PCI's
Expansion ROM BAR register. Only address format of register is same.

In reality, this device does not have any configurable PCI BARs. So ensure
that write operation into BARs (including Expansion ROM BAR) is noop and
registers always contain zero address which indicates that bars are
unsupported.

Fixes: cb056005dc ("arm: a37xx: pci: Add support for accessing PCI Bridge on root bus")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-15 08:57:36 +01:00
Pali Rohár a48e4287d6 pci: pci_mvebu: Do not allow setting ROM BAR on PCI Bridge
The PCI Bridge which represents mvebu PCIe Root Port has Expansion ROM
Base Address register at offset 0x30 but its meaning is different that
of PCI's Expansion ROM BAR register, although the address format of
the register is the same.

In reality, this device does not have any configurable PCI BARs. So
ensure that write operation into BARs (including Expansion ROM BAR) is a
noop and registers always contain zero address which indicates that BARs
are unsupported.

Fixes: a7b61ab58d ("pci: pci_mvebu: Properly configure and use PCI Bridge (PCIe Root Port)")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-15 08:57:36 +01:00
Marek Behún e967c84a6d pci: pci_mvebu, pci_aardvark: Fix size of configuration cache
Since u32 takes up 4 bytes, we need to divide the number of u32s by 4
for cfgcache.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-12-15 08:57:36 +01:00
Adam Ford 182754f43a net: ravb: Support multiple clocks
The RZ/G2 series uses an external clock as a reference to the AVB.
If this clock is controlled by an external programmable clock,
it must be requested by the consumer or it will not turn on.
In order to do this, update the driver to use bulk enable and
disable functions to enable clocks for boards with multiple clocks.

Signed-off-by: Adam Ford <aford173@gmail.com>
2021-12-13 00:37:28 +01:00
Simon Glass d8063dc373 efi: Add a media/block driver for EFI block devices
Add a block driver which handles read/write for EFI block devices. This
driver actually already exists ('efi_block') but is not really suitable
for use as a real U-Boot driver:

- The operations do not provide a udevice
- The code is designed for running as part of EFI loader, so uses
    EFI_PRINT() and EFI_CALL().
- The bind method probes the device, which is not permitted
- It uses 'EFI' as its parent device

The new driver is more 'normal', just requiring its platform data be set
up in advance.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09 11:43:25 -08:00
Simon Glass 42b7f4212a efi: Add uclass for devices provided by UEFI firmware
UCLASS_EFI_LOADER is used for devices created by applications and
drivers loaded by U-Boots UEFI implementation.

This patch provides a new uclass (UCLASS_EFI_MEDIA) to be used for devices
that provided by a UEFI firmware calling U-Boot as an EFI application.

If the two uclasses can be unified, is left to future redesign.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09 11:43:25 -08:00
Simon Glass 2abd8d1c99 efi: Rename UCLASS_EFI and IF_TYPE_EFI
These names are better used for access to devices provided by an EFI
layer. Use EFI_LOADER instead here, since these are only available in
U-Boot's EFI_LOADER layer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-09 11:43:25 -08:00
Tudor Ambarus 2fd1b97f33 spi: atmel-quadspi: Add support for SAMA7G5 QSPI
sama7g5 QSPI has:
1/ One Octal Serial Peripheral Interfaces (QSPI0) Supporting Up to
   200 MHz DDR. Octal, TwinQuad, Hyperflash and OctaFlash Protocols Supported
2/ One Quad Serial Peripheral Interfaces (QSPI1) Supporting Up to
   90 MHz DDR/133 MHz SDR

The QSPI controller of SAMA7G5 uses different clock domains, hence extra
synchronization operations must be performed before accessing some
registers. Differentiate between the versions of the IP using has_gclk.
Differentiate between QSPI0 and QSPI1 with has_octal.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2021-12-07 08:55:22 +02:00
Simon Glass c229cd2b6e ide: Drop ATA_PORT_ADDR
This is not needed anymore. Drop it to simplify the code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-05 09:26:26 -07:00
Simon Glass 7ee2016d61 ide: Drop unused CONFIG options
CONFIG_SYS_ATA_PORT_ADDR is not used in the code anymore. Drop it and use
ATA_PORT_ADDR() locally instead.

Drop CONFIG_IDE_RESET_ROUTINE and CONFIG_IDE_SWAP_IO which are also
unused.

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass 93e1edffb0 Convert CONFIG_KEYBOARD to Kconfig
This converts the following to Kconfig:
   CONFIG_KEYBOARD

Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-05 09:26:26 -07:00
Simon Glass 32c8566f13 sandbox: Drop CONFIG_HOST_MAX_DEVICES
This can go in the related header file. Drop the CONFIG option.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-12-05 09:23:15 -07:00
Tom Rini 558002a0f2 Merge https://source.denx.de/u-boot/custodians/u-boot-riscv 2021-12-03 09:02:49 -05:00
Alexander Preißner fe67ba7418 drivers: core: lists: fix for loop index type
* fixes the bug in function bind_drivers_pass that for
CONFIG_CC_OPTIMIZE_FOR_SIZE=n and no entries in the driver_info list,
i.e. n_ents == 0, the processor steps into the first loop iteration
despite the loop condition being false.
* the Xilinx Zynq-7000 device would eventually hang due to an attempted
access to an invalid memory address
* the bug is fixed by changing the type of idx from uint to int

Board: zynq-zybo
Target: ARM
Compiler: arm-none-eabi-gcc 9.2.1

Signed-off-by: Alexander Preissner <fpga-garage@preissner-muc.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2021-12-02 09:15:43 -07:00
Tom Rini f89615088f Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-net into next
- New Broadcom NetXtreme driver
- Support for socat for netconsole
- Felix switch soft reset fix
2021-12-02 07:16:04 -05:00
Padmarao Begari 0dc0d1e094 i2c: Add Microchip PolarFire SoC I2C driver
Add I2C driver code for the Microchip PolarFire SoC.
This driver supports I2C data transfer and probe for I2C
slave addresses.

Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
2021-12-02 16:43:51 +08:00