ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Chris Packham
Stefan Roese
parent
58d6f68e75
commit
fbe502e9ab
45
arch/arm/dts/kirkwood-d2net.dts
Normal file
45
arch/arm/dts/kirkwood-d2net.dts
Normal file
@ -0,0 +1,45 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree file for d2 Network v2
|
||||
*
|
||||
* Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org>
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/leds-ns2.h>
|
||||
#include "kirkwood-netxbig.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LaCie d2 Network v2";
|
||||
compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
ns2-leds {
|
||||
compatible = "lacie,ns2-leds";
|
||||
|
||||
blue-sata {
|
||||
label = "d2net_v2:blue:sata";
|
||||
slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
|
||||
modes-map = <NS_V2_LED_OFF 1 0
|
||||
NS_V2_LED_ON 0 1
|
||||
NS_V2_LED_ON 1 1
|
||||
NS_V2_LED_SATA 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
red-fail {
|
||||
label = "d2net_v2:red:fail";
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
63
arch/arm/dts/kirkwood-net2big.dts
Normal file
63
arch/arm/dts/kirkwood-net2big.dts
Normal file
@ -0,0 +1,63 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree file for LaCie 2Big Network v2
|
||||
*
|
||||
* Copyright (C) 2014
|
||||
*
|
||||
* Andrew Lunn <andrew@lunn.ch>
|
||||
*
|
||||
* Based on netxbig_v2-setup.c,
|
||||
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6281.dtsi"
|
||||
#include "kirkwood-netxbig.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LaCie 2Big Network v2";
|
||||
compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
fan {
|
||||
compatible = "gpio-fan";
|
||||
alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
®ulators {
|
||||
regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "hdd1power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
g762_clk: g762-oscillator {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
g762@3e {
|
||||
compatible = "gmt,g762";
|
||||
reg = <0x3e>;
|
||||
clocks = <&g762_clk>;
|
||||
};
|
||||
};
|
||||
232
arch/arm/dts/kirkwood-netxbig.dtsi
Normal file
232
arch/arm/dts/kirkwood-netxbig.dtsi
Normal file
@ -0,0 +1,232 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Device Tree common file for LaCie 2Big and 5Big Network v2
|
||||
*
|
||||
* Copyright (C) 2014
|
||||
*
|
||||
* Andrew Lunn <andrew@lunn.ch>
|
||||
*
|
||||
* Based on netxbig_v2-setup.c,
|
||||
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <dt-bindings/leds/leds-netxbig.h>
|
||||
#include "kirkwood.dtsi"
|
||||
#include "kirkwood-6281.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8";
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "mxicy,mx25l4005a", "jedec,spi-nor", "spi-flash";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <20000000>;
|
||||
mode = <0>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0x80000>;
|
||||
label = "u-boot";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
/*
|
||||
* esc and power represent a three position rocker
|
||||
* switch. Thus the conventional KEY_POWER does not fit
|
||||
*/
|
||||
exc {
|
||||
label = "Back power switch (on|auto)";
|
||||
linux,code = <KEY_ESC>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
power {
|
||||
label = "Back power switch (auto|off)";
|
||||
linux,code = <KEY_1>;
|
||||
linux,input-type = <5>;
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
option {
|
||||
label = "Function button";
|
||||
linux,code = <KEY_OPTION>;
|
||||
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
gpio-poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
regulators: regulators {
|
||||
status = "okay";
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "hdd0power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
netxbig_gpio_ext: netxbig-gpio-ext {
|
||||
compatible = "lacie,netxbig-gpio-ext";
|
||||
|
||||
addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
|
||||
&gpio1 16 GPIO_ACTIVE_HIGH
|
||||
&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
|
||||
&gpio1 13 GPIO_ACTIVE_HIGH
|
||||
&gpio1 14 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
netxbig-leds {
|
||||
compatible = "lacie,netxbig-leds";
|
||||
|
||||
gpio-ext = <&netxbig_gpio_ext>;
|
||||
|
||||
timers = <NETXBIG_LED_TIMER1 500 500
|
||||
NETXBIG_LED_TIMER2 500 1000>;
|
||||
|
||||
blue-power {
|
||||
label = "netxbig:blue:power";
|
||||
mode-addr = <0>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 1
|
||||
NETXBIG_LED_TIMER1 3
|
||||
NETXBIG_LED_TIMER2 7>;
|
||||
bright-addr = <1>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
red-power {
|
||||
label = "netxbig:red:power";
|
||||
mode-addr = <0>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 2
|
||||
NETXBIG_LED_TIMER1 4>;
|
||||
bright-addr = <1>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
blue-sata0 {
|
||||
label = "netxbig:blue:sata0";
|
||||
mode-addr = <3>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 7
|
||||
NETXBIG_LED_SATA 1
|
||||
NETXBIG_LED_TIMER1 3>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
red-sata0 {
|
||||
label = "netxbig:red:sata0";
|
||||
mode-addr = <3>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 2
|
||||
NETXBIG_LED_TIMER1 4>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
blue-sata1 {
|
||||
label = "netxbig:blue:sata1";
|
||||
mode-addr = <4>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 7
|
||||
NETXBIG_LED_SATA 1
|
||||
NETXBIG_LED_TIMER1 3>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
red-sata1 {
|
||||
label = "netxbig:red:sata1";
|
||||
mode-addr = <4>;
|
||||
mode-val = <NETXBIG_LED_OFF 0
|
||||
NETXBIG_LED_ON 2
|
||||
NETXBIG_LED_TIMER1 4>;
|
||||
bright-addr = <2>;
|
||||
max-brightness = <7>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <8>;
|
||||
};
|
||||
|
||||
ethphy1: ethernet-phy@1 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
ð0 {
|
||||
status = "okay";
|
||||
ethernet0-port@0 {
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-names = "default";
|
||||
|
||||
pmx_button_function: pmx-button-function {
|
||||
marvell,pins = "mpp34";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_power_off: pmx-button-power-off {
|
||||
marvell,pins = "mpp15";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
pmx_button_power_on: pmx-button-power-on {
|
||||
marvell,pins = "mpp13";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c04";
|
||||
pagesize = <16>;
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
|
||||
CONFIG_SYS_TEXT_BASE=0x600000
|
||||
CONFIG_TARGET_NET2BIG_V2=y
|
||||
CONFIG_IDENT_STRING=" D2 v2"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-d2net"
|
||||
CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2"
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_USE_BOOTARGS=y
|
||||
@ -26,6 +27,7 @@ CONFIG_CMD_FAT=y
|
||||
CONFIG_ISO_PARTITION=y
|
||||
CONFIG_EFI_PARTITION=y
|
||||
# CONFIG_PARTITION_UUIDS is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_MVSATA_IDE=y
|
||||
# CONFIG_MMC is not set
|
||||
@ -39,4 +41,3 @@ CONFIG_KIRKWOOD_SPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_OF_LIBFDT=y
|
||||
|
||||
@ -3,6 +3,7 @@ CONFIG_KIRKWOOD=y
|
||||
CONFIG_SYS_TEXT_BASE=0x600000
|
||||
CONFIG_TARGET_NET2BIG_V2=y
|
||||
CONFIG_IDENT_STRING=" 2Big v2"
|
||||
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-net2big"
|
||||
CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2"
|
||||
CONFIG_BOOTDELAY=3
|
||||
CONFIG_USE_BOOTARGS=y
|
||||
@ -26,6 +27,7 @@ CONFIG_CMD_FAT=y
|
||||
CONFIG_ISO_PARTITION=y
|
||||
CONFIG_EFI_PARTITION=y
|
||||
# CONFIG_PARTITION_UUIDS is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_MVSATA_IDE=y
|
||||
# CONFIG_MMC is not set
|
||||
@ -39,4 +41,3 @@ CONFIG_KIRKWOOD_SPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_OF_LIBFDT=y
|
||||
|
||||
18
include/dt-bindings/leds/leds-netxbig.h
Normal file
18
include/dt-bindings/leds/leds-netxbig.h
Normal file
@ -0,0 +1,18 @@
|
||||
/*
|
||||
* This header provides constants for netxbig LED bindings.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#ifndef _DT_BINDINGS_LEDS_NETXBIG_H
|
||||
#define _DT_BINDINGS_LEDS_NETXBIG_H
|
||||
|
||||
#define NETXBIG_LED_OFF 0
|
||||
#define NETXBIG_LED_ON 1
|
||||
#define NETXBIG_LED_SATA 2
|
||||
#define NETXBIG_LED_TIMER1 3
|
||||
#define NETXBIG_LED_TIMER2 4
|
||||
|
||||
#endif /* _DT_BINDINGS_LEDS_NETXBIG_H */
|
||||
Loading…
Reference in New Issue
Block a user