powerpc/ppc4xx: Do full iocon PHY initialization in software
Up to this point some PHY initialization was done from the FPGA and some from u-boot. From now all initialization is done from u-boot. To keep this maintainable a PHY setup machine was implemented that can execute commands from initialization arrays. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Dirk Eibach
Stefan Roese
parent
d78951db56
commit
f24c8e8dce
@ -99,7 +99,6 @@ unsigned int mclink_fpgacount;
|
||||
struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
|
||||
|
||||
static int setup_88e1518(const char *bus, unsigned char addr);
|
||||
static int verify_88e1518(const char *bus, unsigned char addr);
|
||||
|
||||
int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
|
||||
{
|
||||
@ -405,11 +404,7 @@ int last_stage_init(void)
|
||||
if ((mux_ch == 1) && !ch0_rgmii2_present)
|
||||
continue;
|
||||
|
||||
if (!verify_88e1518(bb_miiphy_buses[0].name, mux_ch)) {
|
||||
printf("Fixup 88e1518 erratum on %s phy %u\n",
|
||||
bb_miiphy_buses[0].name, mux_ch);
|
||||
setup_88e1518(bb_miiphy_buses[0].name, mux_ch);
|
||||
}
|
||||
setup_88e1518(bb_miiphy_buses[0].name, mux_ch);
|
||||
}
|
||||
}
|
||||
|
||||
@ -434,11 +429,7 @@ int last_stage_init(void)
|
||||
if (feature_carrier_speed == CARRIER_SPEED_1G) {
|
||||
miiphy_register(bb_miiphy_buses[k].name,
|
||||
bb_miiphy_read, bb_miiphy_write);
|
||||
if (!verify_88e1518(bb_miiphy_buses[k].name, 0)) {
|
||||
printf("Fixup 88e1518 erratum on %s\n",
|
||||
bb_miiphy_buses[k].name);
|
||||
setup_88e1518(bb_miiphy_buses[k].name, 0);
|
||||
}
|
||||
setup_88e1518(bb_miiphy_buses[k].name, 0);
|
||||
}
|
||||
}
|
||||
|
||||
@ -652,56 +643,189 @@ struct bb_miiphy_bus bb_miiphy_buses[] = {
|
||||
int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
|
||||
sizeof(bb_miiphy_buses[0]);
|
||||
|
||||
/*
|
||||
* Workaround for erratum mentioned in 88E1518 release notes
|
||||
*/
|
||||
|
||||
static int verify_88e1518(const char *bus, unsigned char addr)
|
||||
{
|
||||
u16 phy_id1, phy_id2;
|
||||
|
||||
if (miiphy_read(bus, addr, 2, &phy_id1) ||
|
||||
miiphy_read(bus, addr, 3, &phy_id2)) {
|
||||
printf("Error reading from the PHY addr=%02x\n", addr);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
if ((phy_id1 != 0x0141) || ((phy_id2 & 0xfff0) != 0x0dd0))
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
struct regfix_88e1518 {
|
||||
u8 reg;
|
||||
u16 data;
|
||||
} regfix_88e1518[] = {
|
||||
{ 22, 0x00ff },
|
||||
{ 17, 0x214b },
|
||||
{ 16, 0x2144 },
|
||||
{ 17, 0x0c28 },
|
||||
{ 16, 0x2146 },
|
||||
{ 17, 0xb233 },
|
||||
{ 16, 0x214d },
|
||||
{ 17, 0xcc0c },
|
||||
{ 16, 0x2159 },
|
||||
{ 22, 0x00fb },
|
||||
{ 7, 0xc00d },
|
||||
{ 22, 0x0000 },
|
||||
enum {
|
||||
MIICMD_SET,
|
||||
MIICMD_MODIFY,
|
||||
MIICMD_VERIFY_VALUE,
|
||||
MIICMD_WAIT_FOR_VALUE,
|
||||
};
|
||||
|
||||
static int setup_88e1518(const char *bus, unsigned char addr)
|
||||
struct mii_setupcmd {
|
||||
u8 token;
|
||||
u8 reg;
|
||||
u16 data;
|
||||
u16 mask;
|
||||
u32 timeout;
|
||||
};
|
||||
|
||||
/*
|
||||
* verify we are talking to a 88e1518
|
||||
*/
|
||||
struct mii_setupcmd verify_88e1518[] = {
|
||||
{ MIICMD_SET, 22, 0x0000 },
|
||||
{ MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff },
|
||||
{ MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 },
|
||||
};
|
||||
|
||||
/*
|
||||
* workaround for erratum mentioned in 88E1518 release notes
|
||||
*/
|
||||
struct mii_setupcmd fixup_88e1518[] = {
|
||||
{ MIICMD_SET, 22, 0x00ff },
|
||||
{ MIICMD_SET, 17, 0x214b },
|
||||
{ MIICMD_SET, 16, 0x2144 },
|
||||
{ MIICMD_SET, 17, 0x0c28 },
|
||||
{ MIICMD_SET, 16, 0x2146 },
|
||||
{ MIICMD_SET, 17, 0xb233 },
|
||||
{ MIICMD_SET, 16, 0x214d },
|
||||
{ MIICMD_SET, 17, 0xcc0c },
|
||||
{ MIICMD_SET, 16, 0x2159 },
|
||||
{ MIICMD_SET, 22, 0x00fb },
|
||||
{ MIICMD_SET, 7, 0xc00d },
|
||||
{ MIICMD_SET, 22, 0x0000 },
|
||||
};
|
||||
|
||||
/*
|
||||
* default initialization:
|
||||
* - set RGMII receive timing to "receive clock transition when data stable"
|
||||
* - set RGMII transmit timing to "transmit clock internally delayed"
|
||||
* - set RGMII output impedance target to 78,8 Ohm
|
||||
* - run output impedance calibration
|
||||
* - set autonegotiation advertise to 1000FD only
|
||||
*/
|
||||
struct mii_setupcmd default_88e1518[] = {
|
||||
{ MIICMD_SET, 22, 0x0002 },
|
||||
{ MIICMD_MODIFY, 21, 0x0030, 0x0030 },
|
||||
{ MIICMD_MODIFY, 25, 0x0000, 0x0003 },
|
||||
{ MIICMD_MODIFY, 24, 0x8000, 0x8000 },
|
||||
{ MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 },
|
||||
{ MIICMD_SET, 22, 0x0000 },
|
||||
{ MIICMD_MODIFY, 4, 0x0000, 0x01e0 },
|
||||
{ MIICMD_MODIFY, 9, 0x0200, 0x0300 },
|
||||
};
|
||||
|
||||
/*
|
||||
* turn off CLK125 for PHY daughterboard
|
||||
*/
|
||||
struct mii_setupcmd ch1fix_88e1518[] = {
|
||||
{ MIICMD_SET, 22, 0x0002 },
|
||||
{ MIICMD_MODIFY, 16, 0x0006, 0x0006 },
|
||||
{ MIICMD_SET, 22, 0x0000 },
|
||||
};
|
||||
|
||||
/*
|
||||
* perform copper software reset
|
||||
*/
|
||||
struct mii_setupcmd swreset_88e1518[] = {
|
||||
{ MIICMD_SET, 22, 0x0000 },
|
||||
{ MIICMD_MODIFY, 0, 0x8000, 0x8000 },
|
||||
{ MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 },
|
||||
};
|
||||
|
||||
static int process_setupcmd(const char *bus, unsigned char addr,
|
||||
struct mii_setupcmd *setupcmd)
|
||||
{
|
||||
int res;
|
||||
u8 reg = setupcmd->reg;
|
||||
u16 data = setupcmd->data;
|
||||
u16 mask = setupcmd->mask;
|
||||
u32 timeout = setupcmd->timeout;
|
||||
u16 orig_data;
|
||||
unsigned long start;
|
||||
|
||||
debug("mii %s:%u reg %2u ", bus, addr, reg);
|
||||
|
||||
switch (setupcmd->token) {
|
||||
case MIICMD_MODIFY:
|
||||
res = miiphy_read(bus, addr, reg, &orig_data);
|
||||
if (res)
|
||||
break;
|
||||
debug("is %04x. (value %04x mask %04x) ", orig_data, data,
|
||||
mask);
|
||||
data = (orig_data & ~mask) | (data & mask);
|
||||
case MIICMD_SET:
|
||||
debug("=> %04x\n", data);
|
||||
res = miiphy_write(bus, addr, reg, data);
|
||||
break;
|
||||
case MIICMD_VERIFY_VALUE:
|
||||
res = miiphy_read(bus, addr, reg, &orig_data);
|
||||
if (res)
|
||||
break;
|
||||
if ((orig_data & mask) != (data & mask))
|
||||
res = -1;
|
||||
debug("(value %04x mask %04x) == %04x? %s\n", data, mask,
|
||||
orig_data, res ? "FAIL" : "PASS");
|
||||
break;
|
||||
case MIICMD_WAIT_FOR_VALUE:
|
||||
res = -1;
|
||||
start = get_timer(0);
|
||||
while ((res != 0) && (get_timer(start) < timeout)) {
|
||||
res = miiphy_read(bus, addr, reg, &orig_data);
|
||||
if (res)
|
||||
continue;
|
||||
if ((orig_data & mask) != (data & mask))
|
||||
res = -1;
|
||||
}
|
||||
debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data,
|
||||
mask, orig_data, res ? "FAIL" : "PASS",
|
||||
get_timer(start));
|
||||
break;
|
||||
default:
|
||||
res = -1;
|
||||
break;
|
||||
}
|
||||
|
||||
return res;
|
||||
}
|
||||
|
||||
static int process_setup(const char *bus, unsigned char addr,
|
||||
struct mii_setupcmd *setupcmd, unsigned int count)
|
||||
{
|
||||
int res = 0;
|
||||
unsigned int k;
|
||||
|
||||
for (k = 0; k < ARRAY_SIZE(regfix_88e1518); ++k) {
|
||||
if (miiphy_write(bus, addr,
|
||||
regfix_88e1518[k].reg,
|
||||
regfix_88e1518[k].data)) {
|
||||
printf("Error writing to the PHY addr=%02x\n", addr);
|
||||
return -1;
|
||||
for (k = 0; k < count; ++k) {
|
||||
res = process_setupcmd(bus, addr, &setupcmd[k]);
|
||||
if (res) {
|
||||
printf("mii cmd %u on bus %s addr %u failed, aborting setup",
|
||||
setupcmd[k].token, bus, addr);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
return res;
|
||||
}
|
||||
|
||||
static int setup_88e1518(const char *bus, unsigned char addr)
|
||||
{
|
||||
int res;
|
||||
|
||||
res = process_setup(bus, addr,
|
||||
verify_88e1518, ARRAY_SIZE(verify_88e1518));
|
||||
if (res)
|
||||
return res;
|
||||
|
||||
res = process_setup(bus, addr,
|
||||
fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
|
||||
if (res)
|
||||
return res;
|
||||
|
||||
res = process_setup(bus, addr,
|
||||
default_88e1518, ARRAY_SIZE(default_88e1518));
|
||||
if (res)
|
||||
return res;
|
||||
|
||||
if (addr) {
|
||||
res = process_setup(bus, addr,
|
||||
ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
|
||||
if (res)
|
||||
return res;
|
||||
}
|
||||
|
||||
res = process_setup(bus, addr,
|
||||
swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
|
||||
if (res)
|
||||
return res;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
Loading…
Reference in New Issue
Block a user