Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig

This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2022-01-31 07:49:37 -07:00 · 2022-01-31 07:49:37 -07:00 · edca8cf721
commit edca8cf721
parent ce30e3ff1e
140 changed files with 128 additions and 161 deletions
--- a/8
+++ b/8
@ -732,14 +732,6 @@ The following options need to be configured:
 			When enabled, makes the IDE subsystem use 64bit sector addresses.
 			Default is 32bit.

- SCSI Support:
-		CONFIG_SYS_SCSI_MAX_LUN [8] and CONFIG_SYS_SCSI_MAX_SCSI_ID [7]
-		can be adjusted to define the maximum numbers of LUNs and SCSI
-		IDs.
-
-		The environment variable 'scsidevs' is set to the number of
-		SCSI devices found during the last scan.
-
 - NETWORK Support (PCI):
 		CONFIG_E1000_SPI
 		Utility code for direct access to the SPI bus on Intel 8257x.
--- a/arch/Kconfig
+++ b/arch/Kconfig
@ -172,7 +172,6 @@ config SANDBOX
 	imply FIRMWARE
 	imply HASH_VERIFY
 	imply LZMA
-	imply SCSI
 	imply TEE
 	imply AVB_VERIFY
 	imply LIBAVB
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@ -78,9 +78,6 @@

 /* SATA */
 #define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
 #ifdef CONFIG_DDR_SPD
 #define CONFIG_VERY_BIG_RAM
 #define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE		((phys_size_t)2 << 30)
--- a/configs/MPC837XERDB_defconfig
+++ b/configs/MPC837XERDB_defconfig
@ -171,6 +171,7 @@ CONFIG_ENV_ADDR=0xFE080000
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_FSL_SATA=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xFE001001
 CONFIG_SYS_OR0_PRELIM=0xFF800193
--- a/configs/P1010RDB-PA_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NAND_defconfig
@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PA_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PA_36BIT_NOR_defconfig
@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SDCARD_defconfig
@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_36BIT_SPIFLASH_defconfig
@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PA_NAND_defconfig
+++ b/configs/P1010RDB-PA_NAND_defconfig
@ -53,6 +53,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ b/configs/P1010RDB-PA_NOR_defconfig
@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PA_SDCARD_defconfig
+++ b/configs/P1010RDB-PA_SDCARD_defconfig
@ -47,6 +47,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PA_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PA_SPIFLASH_defconfig
@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_36BIT_NAND_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NAND_defconfig
@ -55,6 +55,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_36BIT_NOR_defconfig
+++ b/configs/P1010RDB-PB_36BIT_NOR_defconfig
@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SDCARD_defconfig
@ -49,6 +49,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_36BIT_SPIFLASH_defconfig
@ -51,6 +51,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_NAND_defconfig
+++ b/configs/P1010RDB-PB_NAND_defconfig
@ -54,6 +54,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_NOR_defconfig
+++ b/configs/P1010RDB-PB_NOR_defconfig
@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_SDCARD_defconfig
+++ b/configs/P1010RDB-PB_SDCARD_defconfig
@ -48,6 +48,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P1010RDB-PB_SPIFLASH_defconfig
+++ b/configs/P1010RDB-PB_SPIFLASH_defconfig
@ -50,6 +50,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
--- a/configs/P2041RDB_NAND_defconfig
+++ b/configs/P2041RDB_NAND_defconfig
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xFFA00C21
--- a/configs/P2041RDB_SDCARD_defconfig
+++ b/configs/P2041RDB_SDCARD_defconfig
@ -41,6 +41,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xE8001001
--- a/configs/P2041RDB_SPIFLASH_defconfig
+++ b/configs/P2041RDB_SPIFLASH_defconfig
@ -42,6 +42,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xE8001001
--- a/configs/P2041RDB_defconfig
+++ b/configs/P2041RDB_defconfig
@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xE8001001
--- a/configs/P3041DS_NAND_defconfig
+++ b/configs/P3041DS_NAND_defconfig
@ -38,6 +38,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/P3041DS_SDCARD_defconfig
+++ b/configs/P3041DS_SDCARD_defconfig
@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/P3041DS_SPIFLASH_defconfig
+++ b/configs/P3041DS_SPIFLASH_defconfig
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/P3041DS_defconfig
+++ b/configs/P3041DS_defconfig
@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/P5040DS_NAND_defconfig
+++ b/configs/P5040DS_NAND_defconfig
@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/P5040DS_SDCARD_defconfig
+++ b/configs/P5040DS_SDCARD_defconfig
@ -39,6 +39,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/P5040DS_SPIFLASH_defconfig
+++ b/configs/P5040DS_SPIFLASH_defconfig
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/P5040DS_defconfig
+++ b/configs/P5040DS_defconfig
@ -35,6 +35,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/T2080QDS_NAND_defconfig
+++ b/configs/T2080QDS_NAND_defconfig
@ -56,6 +56,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
--- a/configs/T2080QDS_SDCARD_defconfig
+++ b/configs/T2080QDS_SDCARD_defconfig
@ -55,6 +55,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
--- a/configs/T2080QDS_SECURE_BOOT_defconfig
+++ b/configs/T2080QDS_SECURE_BOOT_defconfig
@ -40,6 +40,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
 CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y
--- a/configs/T2080QDS_SPIFLASH_defconfig
+++ b/configs/T2080QDS_SPIFLASH_defconfig
@ -57,6 +57,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
--- a/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
+++ b/configs/T2080QDS_SRIO_PCIE_BOOT_defconfig
@ -37,6 +37,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_REMOTE=y
 CONFIG_ENV_ADDR=0xFFE20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
--- a/configs/T2080QDS_defconfig
+++ b/configs/T2080QDS_defconfig
@ -40,6 +40,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DYNAMIC_DDR_CLK_FREQ=y
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_SDCARD_defconfig
+++ b/configs/T2080RDB_SDCARD_defconfig
@ -59,6 +59,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_SPIFLASH_defconfig
+++ b/configs/T2080RDB_SPIFLASH_defconfig
@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_defconfig
+++ b/configs/T2080RDB_defconfig
@ -44,6 +44,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_revD_NAND_defconfig
+++ b/configs/T2080RDB_revD_NAND_defconfig
@ -61,6 +61,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_revD_SDCARD_defconfig
+++ b/configs/T2080RDB_revD_SDCARD_defconfig
@ -60,6 +60,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_revD_SPIFLASH_defconfig
+++ b/configs/T2080RDB_revD_SPIFLASH_defconfig
@ -62,6 +62,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T2080RDB_revD_defconfig
+++ b/configs/T2080RDB_revD_defconfig
@ -45,6 +45,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133330000
 CONFIG_DDR_ECC=y
--- a/configs/T4240RDB_SDCARD_defconfig
+++ b/configs/T4240RDB_SDCARD_defconfig
@ -51,6 +51,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133333333
 CONFIG_DDR_ECC=y
--- a/configs/T4240RDB_defconfig
+++ b/configs/T4240RDB_defconfig
@ -36,6 +36,7 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_FSL_CAAM=y
 CONFIG_DDR_CLK_FREQ=133333333
 CONFIG_DDR_ECC=y
--- a/configs/am57xx_hs_evm_usb_defconfig
+++ b/configs/am57xx_hs_evm_usb_defconfig
@ -102,6 +102,7 @@ CONFIG_DM_PMIC=y
 CONFIG_PMIC_PALMAS=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_PALMAS=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_DM_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
--- a/configs/controlcenterdc_defconfig
+++ b/configs/controlcenterdc_defconfig
@ -77,6 +77,8 @@ CONFIG_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SCSI=y
+CONFIG_SCSI_AHCI_PLAT=y
+CONFIG_SYS_SCSI_MAX_SCSI_ID=2
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550=y
 CONFIG_KIRKWOOD_SPI=y
--- a/configs/d2net_v2_defconfig
+++ b/configs/d2net_v2_defconfig
@ -48,6 +48,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
--- a/configs/db-mv784mp-gp_defconfig
+++ b/configs/db-mv784mp-gp_defconfig
@ -50,6 +50,7 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 # CONFIG_MMC is not set
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@ -42,6 +42,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_SYS_ATA_STRIDE=4
 CONFIG_SYS_ATA_DATA_OFFSET=0x100
 CONFIG_SYS_ATA_REG_OFFSET=0x100
--- a/configs/goflexhome_defconfig
+++ b/configs/goflexhome_defconfig
@ -46,6 +46,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
--- a/configs/highbank_defconfig
+++ b/configs/highbank_defconfig
@ -29,3 +29,5 @@ CONFIG_BOOTCOUNT_LIMIT=y
 # CONFIG_MMC is not set
 CONFIG_CALXEDA_XGMAC=y
 CONFIG_SCSI=y
+CONFIG_SCSI_AHCI_PLAT=y
+CONFIG_SYS_SCSI_MAX_SCSI_ID=5
--- a/configs/inetspace_v2_defconfig
+++ b/configs/inetspace_v2_defconfig
@ -48,6 +48,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
--- a/configs/ls1021atsn_qspi_defconfig
+++ b/configs/ls1021atsn_qspi_defconfig
@ -62,6 +62,7 @@ CONFIG_TSEC_ENET=y
 CONFIG_NVME=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
--- a/configs/ls1021atsn_sdcard_defconfig
+++ b/configs/ls1021atsn_sdcard_defconfig
@ -78,6 +78,7 @@ CONFIG_TSEC_ENET=y
 CONFIG_NVME=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@ -87,6 +87,7 @@ CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_U_QE=y
 CONFIG_SYS_QE_FW_ADDR=0x940000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@ -88,6 +88,7 @@ CONFIG_PCIE_LAYERSCAPE_EP=y
 CONFIG_POWER_LEGACY=y
 CONFIG_POWER_I2C=y
 CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@ -91,6 +91,7 @@ CONFIG_MII=y
 CONFIG_FSL_LS_MDIO=y
 CONFIG_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SYS_NS16550=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
--- a/configs/lschlv2_defconfig
+++ b/configs/lschlv2_defconfig
@ -40,6 +40,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
--- a/configs/lsxhl_defconfig
+++ b/configs/lsxhl_defconfig
@ -40,6 +40,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
--- a/configs/net2big_v2_defconfig
+++ b/configs/net2big_v2_defconfig
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
--- a/configs/netspace_lite_v2_defconfig
+++ b/configs/netspace_lite_v2_defconfig
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
--- a/configs/netspace_max_v2_defconfig
+++ b/configs/netspace_max_v2_defconfig
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
--- a/configs/netspace_mini_v2_defconfig
+++ b/configs/netspace_mini_v2_defconfig
@ -47,6 +47,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_BLK=y
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
--- a/configs/netspace_v2_defconfig
+++ b/configs/netspace_v2_defconfig
@ -49,6 +49,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 CONFIG_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@ -44,6 +44,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
--- a/configs/omap5_uevm_defconfig
+++ b/configs/omap5_uevm_defconfig
@ -47,6 +47,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_ETH=y
 CONFIG_SCSI=y
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_CONS_INDEX=3
 CONFIG_SYS_NS16550=y
 CONFIG_USB=y
--- a/configs/pg_wcom_expu1_defconfig
+++ b/configs/pg_wcom_expu1_defconfig
@ -79,6 +79,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
--- a/configs/pg_wcom_expu1_update_defconfig
+++ b/configs/pg_wcom_expu1_update_defconfig
@ -77,6 +77,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
--- a/configs/pg_wcom_seli8_defconfig
+++ b/configs/pg_wcom_seli8_defconfig
@ -79,6 +79,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
--- a/configs/pg_wcom_seli8_update_defconfig
+++ b/configs/pg_wcom_seli8_update_defconfig
@ -77,6 +77,7 @@ CONFIG_PHY_GIGE=y
 CONFIG_MII=y
 CONFIG_TSEC_ENET=y
 CONFIG_SYS_QE_FW_ADDR=0x60020000
+CONFIG_SCSI_AHCI_PLAT=y
 CONFIG_SPECIFY_CONSOLE_INDEX=y
 CONFIG_DM_SERIAL=y
 CONFIG_SYS_NS16550=y
--- a/configs/pogo_v4_defconfig
+++ b/configs/pogo_v4_defconfig
@ -58,6 +58,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_KIRKWOOD_GPIO=y
 # CONFIG_MMC_HW_PARTITIONING is not set
 CONFIG_MVEBU_MMC=y
--- a/configs/sandbox64_defconfig
+++ b/configs/sandbox64_defconfig
@ -104,6 +104,7 @@ CONFIG_DEVRES=y
 CONFIG_DEBUG_DEVRES=y
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@ -128,6 +128,7 @@ CONFIG_DEBUG_DEVRES=y
 CONFIG_SIMPLE_PM_BUS=y
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
@ -256,6 +257,9 @@ CONFIG_RESET_SCMI=y
 CONFIG_DM_RNG=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_RV8803=y
+CONFIG_SCSI_AHCI_PLAT=y
+CONFIG_SYS_SCSI_MAX_SCSI_ID=8
+CONFIG_SYS_SCSI_MAX_LUN=4
 CONFIG_SANDBOX_SERIAL=y
 CONFIG_SMEM=y
 CONFIG_SANDBOX_SMEM=y
@ -265,6 +269,7 @@ CONFIG_SOUND_MAX98357A=y
 CONFIG_SOUND_SANDBOX=y
 CONFIG_SOC_DEVICE=y
 CONFIG_SANDBOX_SPI=y
+CONFIG_SCSI=y
 CONFIG_SPMI=y
 CONFIG_SPMI_SANDBOX=y
 CONFIG_SYSINFO=y
--- a/configs/sandbox_flattree_defconfig
+++ b/configs/sandbox_flattree_defconfig
@ -84,6 +84,7 @@ CONFIG_DEVRES=y
 CONFIG_DEBUG_DEVRES=y
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_CLK=y
--- a/configs/sandbox_noinst_defconfig
+++ b/configs/sandbox_noinst_defconfig
@ -108,6 +108,7 @@ CONFIG_DEBUG_DEVRES=y
 # CONFIG_SPL_SIMPLE_BUS is not set
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
--- a/configs/sandbox_spl_defconfig
+++ b/configs/sandbox_spl_defconfig
@ -110,6 +110,7 @@ CONFIG_DEBUG_DEVRES=y
 # CONFIG_SPL_SIMPLE_BUS is not set
 CONFIG_ADC=y
 CONFIG_ADC_SANDBOX=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SYS_IDE_MAXBUS=1
--- a/configs/sheevaplug_defconfig
+++ b/configs/sheevaplug_defconfig
@ -47,6 +47,7 @@ CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_MVEBU_MMC=y
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
--- a/configs/theadorable_debug_defconfig
+++ b/configs/theadorable_debug_defconfig
@ -55,6 +55,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_SATA=y
 CONFIG_SATA_MV=y
+CONFIG_SYS_SATA_MAX_DEVICE=1
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_BOOTCOUNT_RAM=y
 CONFIG_FPGA_ALTERA=y
--- a/configs/tools-only_defconfig
+++ b/configs/tools-only_defconfig
@ -19,6 +19,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 # CONFIG_NET is not set
 # CONFIG_ACPIGEN is not set
+CONFIG_SYS_SATA_MAX_DEVICE=2
 CONFIG_AXI=y
 CONFIG_AXI_SANDBOX=y
 CONFIG_SANDBOX_GPIO=y
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@ -135,6 +135,16 @@ config SATA_SIL
 	  Enable this driver to support the SIL3131, SIL3132 and SIL3124
 	  SATA controllers.

+config SYS_SATA_MAX_DEVICE
+	int "Maximum number of SATA devices"
+	depends on !AHCI || FSL_SATA || SATA_MV
+	help
+	  Sets the maximum number of SATA devices which can be supported
+	  by U-Boot.
+
+	  This is only partially converted to driver model. See sata_bread()
+	  for example, which shows where the conversion needs to be completed.
+
 endif # SATA

 endmenu
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@ -16,3 +16,33 @@ config DM_SCSI
 	  which supports SCSI and SATA HDDs. For every device configuration
 	  (IDs/LUNs) a block device is created with RAW read/write and
 	  filesystem support.
+
+if SCSI && !DM_SCSI
+
+config SCSI_AHCI_PLAT
+	bool "Platform-specific init of AHCI"
+	help
+	  This enables a way for boards to set up an AHCI device manually, by
+	  called ahci_init() and providing an ahci_reset() mechanism.
+
+	  This is deprecated. An AHCI driver should be provided instead.
+
+config SYS_SCSI_MAX_SCSI_ID
+	int "Maximum supporedt SCSI ID"
+	default 1
+	help
+	  Sets the maximum number of SCSI IDs to scan when looking for devices.
+	  IDs from 0 to (this value - 1) are scanned.
+
+	  This is deprecated and is not needed when BLK is enabled.
+
+config SYS_SCSI_MAX_LUN
+	int "Maximum support SCSI LUN"
+	default 1
+	help
+	  Sets the maximum number of SCSI Logical Unit Numbers (LUNs) to scan on
+	  devices. LUNs from 0 to (this value - 1) are scanned.
+
+	  This is deprecated and is not needed when CONFIG_DM_SCSI is enabled.
+
+endif
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@ -15,4 +15,6 @@ obj-$(CONFIG_SCSI) += scsi.o
 endif
 endif

+ifdef CONFIG_SCSI
 obj-$(CONFIG_SANDBOX) += sandbox_scsi.o
+endif
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@ -275,7 +275,6 @@
 /*
 * SATA
 */
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1_OFFSET	0x18000
 #define CONFIG_SYS_SATA1	(CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET)
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@ -544,7 +544,6 @@ extern unsigned long get_sdram_size(void);
 #define CONFIG_FSL_SATA_V2

 #ifdef CONFIG_FSL_SATA
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@ -349,7 +349,6 @@
 #define CONFIG_FSL_SATA_V2

 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
--- a/include/configs/P4080DS.h
+++ b/include/configs/P4080DS.h
@ -11,7 +11,6 @@

 #define CONFIG_PCIE3

-#define CONFIG_SYS_SATA_MAX_DEVICE  2
 #define CONFIG_LBA48

 #define CONFIG_SYS_SRIO
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@ -438,7 +438,6 @@
 /* SATA */
 #define CONFIG_FSL_SATA_V2
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@ -488,7 +488,6 @@
 * SATA
 */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@ -443,7 +443,6 @@
 * SATA
 */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@ -180,7 +180,6 @@

 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
@ -466,7 +465,6 @@

 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@ -48,11 +48,6 @@
 #define CONFIG_NET_RETRY_COUNT		10
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs longer aneg time at 1G */

-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /*
 * Default to using SPI for environment, etc.
 * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@ -35,13 +35,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif

-/* SATA support */
-#ifdef CONFIG_SCSI
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#endif
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@ -160,7 +160,6 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */

 /* SATA */
-#define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_LBA48
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@ -18,13 +18,6 @@
 * U-Boot into it.
 */

-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /* Environment in SPI NOR flash */

 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@ -347,7 +347,6 @@

 /* SATA */
 #ifdef CONFIG_FSL_SATA_V2
-#define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@ -13,13 +13,6 @@
 /* I2C */
 #define CONFIG_I2C_MVTWSI_BASE0		MVEBU_TWSI_BASE

-/*
- * SATA/SCSI/AHCI configuration
- */
-#define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-
 /* Environment in SPI NOR flash */

 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
--- a/Show More
+++ b/Show More