spi: Add support for SPL_OF_PLATDATA to mxs_spi.c driver

After this patch the mxs_spi.c DM/DTS driver can be used at early SPL to
read payload from SPI-NOR memories.

It was necessary to adjust its name to 'fsl_imx_2{38}_spi' to match
requirements for SPL_OF_PLATDATA usage.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
This commit is contained in:
Lukasz Majewski 2019-09-05 09:54:58 +02:00 committed by Stefano Babic
parent c2050e10e1
commit ec0c81f8ed

View File

@ -57,7 +57,18 @@ static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
#else
#include <dm.h>
#include <errno.h>
#include <dt-structs.h>
#ifdef CONFIG_MX28
#define dtd_fsl_imx_spi dtd_fsl_imx28_spi
#else /* CONFIG_MX23 */
#define dtd_fsl_imx_spi dtd_fsl_imx23_spi
#endif
struct mxs_spi_platdata {
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_fsl_imx_spi dtplat;
#endif
s32 frequency; /* Default clock frequency, -1 for none */
fdt_addr_t base; /* SPI IP block base address */
int num_cs; /* Number of CSes supported */
@ -430,11 +441,26 @@ static int mxs_spi_probe(struct udevice *bus)
int ret;
debug("%s: probe\n", __func__);
#if CONFIG_IS_ENABLED(OF_PLATDATA)
struct dtd_fsl_imx_spi *dtplat = &plat->dtplat;
struct phandle_1_arg *p1a = &dtplat->clocks[0];
priv->regs = (struct mxs_ssp_regs *)dtplat->reg[0];
priv->dma_channel = dtplat->dmas[1];
priv->clk_id = p1a->arg[0];
priv->max_freq = dtplat->spi_max_frequency;
plat->num_cs = dtplat->num_cs;
debug("OF_PLATDATA: regs: 0x%x max freq: %d clkid: %d\n",
(unsigned int)priv->regs, priv->max_freq, priv->clk_id);
#else
priv->regs = (struct mxs_ssp_regs *)plat->base;
priv->max_freq = plat->frequency;
priv->dma_channel = plat->dma_id;
priv->clk_id = plat->clk_id;
#endif
mxs_reset_block(&priv->regs->hw_ssp_ctrl0_reg);
@ -571,16 +597,20 @@ static int mxs_ofdata_to_platdata(struct udevice *bus)
return 0;
}
#endif
static const struct udevice_id mxs_spi_ids[] = {
{ .compatible = "fsl,imx23-spi" },
{ .compatible = "fsl,imx28-spi" },
{ }
};
#endif
U_BOOT_DRIVER(mxs_spi) = {
.name = "mxs_spi",
#ifdef CONFIG_MX28
.name = "fsl_imx28_spi",
#else /* CONFIG_MX23 */
.name = "fsl_imx23_spi",
#endif
.id = UCLASS_SPI,
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.of_match = mxs_spi_ids,