Merge git://git.denx.de/u-boot-mpc83xx

- Update MPC83xx platform support to current best practices, etc.

arch/powerpc/Kconfig

@@ -39,6 +39,12 @@ config MPC8xx
 
 endchoice
 
+config HIGH_BATS
+	bool "Enable high BAT registers"
+	help
+	  Enable BATs (block address translation registers) 4-7 on machines
+	  that support them.
+
 source "arch/powerpc/cpu/mpc83xx/Kconfig"
 source "arch/powerpc/cpu/mpc85xx/Kconfig"
 source "arch/powerpc/cpu/mpc86xx/Kconfig"

arch/powerpc/cpu/mpc83xx/Kconfig

@@ -10,38 +10,66 @@ choice
 
 config TARGET_MPC8308_P1M
 	bool "Support mpc8308_p1m"
+	select ARCH_MPC8308
 
 config TARGET_SBC8349
 	bool "Support sbc8349"
+	select ARCH_MPC8349
 
 config TARGET_VE8313
 	bool "Support ve8313"
+	select ARCH_MPC8313
 
 config TARGET_VME8349
 	bool "Support vme8349"
+	select ARCH_MPC8349
+
+config TARGET_CADDY2
+	bool "Support caddy2"
+	select ARCH_MPC8349
 
 config TARGET_MPC8308RDB
 	bool "Support MPC8308RDB"
+	select ARCH_MPC8308
 	select SYS_FSL_ERRATUM_ESDHC111
 
-config TARGET_MPC8313ERDB
-	bool "Support MPC8313ERDB"
+config TARGET_MPC8313ERDB_NOR
+	bool "Support MPC8313ERDB_NOR"
+	select ARCH_MPC8313
+	select BOARD_EARLY_INIT_F
+	select SUPPORT_SPL
+
+config TARGET_MPC8313ERDB_NAND
+	bool "Support MPC8313ERDB_NAND"
+	select ARCH_MPC8313
 	select BOARD_EARLY_INIT_F
 	select SUPPORT_SPL
 
 config TARGET_MPC8315ERDB
 	bool "Support MPC8315ERDB"
+	select ARCH_MPC8315
 	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8323ERDB
 	bool "Support MPC8323ERDB"
+	select ARCH_MPC832X
 
 config TARGET_MPC832XEMDS
 	bool "Support MPC832XEMDS"
+	select ARCH_MPC832X
 	select BOARD_EARLY_INIT_F
 
 config TARGET_MPC8349EMDS
 	bool "Support MPC8349EMDS"
+	select ARCH_MPC8349
+	select BOARD_EARLY_INIT_F
+	select SYS_FSL_DDR
+	select SYS_FSL_DDR_BE
+	select SYS_FSL_HAS_DDR2
+
+config TARGET_MPC8349EMDS_SDRAM
+	bool "Support MPC8349EMDS_SDRAM"
+	select ARCH_MPC8349
 	select BOARD_EARLY_INIT_F
 	select SYS_FSL_DDR
 	select SYS_FSL_DDR_BE
@@ -49,53 +77,272 @@ config TARGET_MPC8349EMDS
 
 config TARGET_MPC8349ITX
 	bool "Support MPC8349ITX"
+	select ARCH_MPC8349
 	imply CMD_IRQ
 
 config TARGET_MPC837XEMDS
 	bool "Support MPC837XEMDS"
+	select ARCH_MPC837X
 	select BOARD_EARLY_INIT_F
 	imply CMD_SATA
 	imply FSL_SATA
 
 config TARGET_MPC837XERDB
 	bool "Support MPC837XERDB"
+	select ARCH_MPC837X
 	select BOARD_EARLY_INIT_F
 
 config TARGET_IDS8313
 	bool "Support ids8313"
+	select ARCH_MPC8313
 	select DM
 	imply CMD_DM
 
-config TARGET_KM8360
-	bool "Support km8360"
+config TARGET_KMETER1
+	bool "Support kmeter1"
+	select ARCH_MPC8360
+	imply CMD_CRAMFS
+	imply CMD_DIAG
+	imply FS_CRAMFS
+
+config TARGET_KMCOGE5NE
+	bool "Support kmcoge5ne"
+	select ARCH_MPC8360
 	imply CMD_CRAMFS
 	imply CMD_DIAG
 	imply FS_CRAMFS
 
 config TARGET_SUVD3
 	bool "Support suvd3"
+	select ARCH_MPC832X
+	imply CMD_CRAMFS
+	imply FS_CRAMFS
+
+config TARGET_KMVECT1
+	bool "Support kmvect1"
+	select ARCH_MPC8309
+	imply CMD_CRAMFS
+	imply FS_CRAMFS
+
+config TARGET_KMTEGR1
+	bool "Support kmtegr1"
+	select ARCH_MPC8309
 	imply CMD_CRAMFS
 	imply FS_CRAMFS
 
 config TARGET_TUXX1
 	bool "Support tuxx1"
+	select ARCH_MPC832X
+	imply CMD_CRAMFS
+	imply FS_CRAMFS
+
+config TARGET_KMSUPX5
+	bool "Support kmsupx5"
+	select ARCH_MPC832X
+	imply CMD_CRAMFS
+	imply FS_CRAMFS
+
+config TARGET_TUGE1
+	bool "Support tuge1"
+	select ARCH_MPC832X
+	imply CMD_CRAMFS
+	imply FS_CRAMFS
+
+config TARGET_KMOPTI2
+	bool "Support kmopti2"
+	select ARCH_MPC832X
+	imply CMD_CRAMFS
+	imply FS_CRAMFS
+
+config TARGET_KMTEPR2
+	bool "Support kmtepr2"
+	select ARCH_MPC832X
 	imply CMD_CRAMFS
 	imply FS_CRAMFS
 
 config TARGET_TQM834X
 	bool "Support TQM834x"
+	select ARCH_MPC8349
 
 config TARGET_HRCON
 	bool "Support hrcon"
+	select ARCH_MPC8308
 	select SYS_FSL_ERRATUM_ESDHC111
 
 config TARGET_STRIDER
 	bool "Support strider"
+	select ARCH_MPC8308
 	select SYS_FSL_ERRATUM_ESDHC111
 	imply CMD_PCA953X
 
+config TARGET_GAZERBEAM
+	bool "Support gazerbeam"
+	select ARCH_MPC8308
+	select SYS_FSL_ERRATUM_ESDHC111
+	imply ENV_IS_IN_FLASH
+	help
+	  The "Gazerbeam" is a modular system by Guntermann & Drunck GmbH
+	  Systementwicklung based on the NXP MPC8308 SoC for usage in KVM
+	  appliances.
+
+	  Features include:
+	  * Two gigabit ethernet ports
+	  * Multiple USB ports (depending on variant)
+	  * Several gigabit ethernet or optical fiber ports (depending on
+	    variant)
+	  * Several display port inputs and outputs, and supporting redrivers
+	    (depending on variant)
+	  * Several FPGAs with custom logic (depending on variant)
+
 endchoice
 
+config MPC83XX_QUICC_ENGINE
+	bool
+
+# TODO: Imply MPC83xx PCI driver
+config MPC83XX_PCI_SUPPORT
+	bool
+
+# TODO: Imply TSEC driver
+config MPC83XX_TSEC1_SUPPORT
+	bool
+
+config MPC83XX_TSEC2_SUPPORT
+	bool
+
+config MPC83XX_PCIE1_SUPPORT
+	bool
+
+config MPC83XX_PCIE2_SUPPORT
+	bool
+
+config MPC83XX_SDHC_SUPPORT
+	bool
+
+config MPC83XX_SATA_SUPPORT
+	bool
+
+config MPC83XX_SECOND_I2C_SUPPORT
+	bool
+
+config MPC83XX_LDP_PIN
+	bool
+
+config ARCH_MPC830X
+	bool
+	select MPC83XX_SDHC_SUPPORT
+
+config ARCH_MPC8308
+	bool
+	select ARCH_MPC830X
+	select MPC83XX_TSEC1_SUPPORT
+	select MPC83XX_TSEC2_SUPPORT
+	select MPC83XX_PCIE1_SUPPORT
+	select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC8309
+	bool
+	select ARCH_MPC830X
+	select MPC83XX_QUICC_ENGINE
+	select MPC83XX_PCI_SUPPORT
+	select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC831X
+	bool
+	select MPC83XX_PCI_SUPPORT
+	select MPC83XX_TSEC1_SUPPORT
+	select MPC83XX_TSEC2_SUPPORT
+
+config ARCH_MPC8313
+	bool
+	select ARCH_MPC831X
+	select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC8315
+	bool
+	select ARCH_MPC831X
+	select MPC83XX_PCIE1_SUPPORT
+	select MPC83XX_PCIE2_SUPPORT
+	select MPC83XX_SATA_SUPPORT
+
+config ARCH_MPC832X
+	bool
+	select MPC83XX_QUICC_ENGINE
+	select MPC83XX_PCI_SUPPORT
+
+config ARCH_MPC834X
+	bool
+
+config ARCH_MPC8349
+	bool
+	select ARCH_MPC834X
+	select MPC83XX_PCI_SUPPORT
+	select MPC83XX_TSEC1_SUPPORT
+	select MPC83XX_TSEC2_SUPPORT
+	select MPC83XX_LDP_PIN
+	select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC8360
+	bool
+	select MPC83XX_QUICC_ENGINE
+	select MPC83XX_PCI_SUPPORT
+	select MPC83XX_LDP_PIN
+	select MPC83XX_SECOND_I2C_SUPPORT
+
+config ARCH_MPC837X
+	bool
+	select MPC83XX_PCI_SUPPORT
+	select MPC83XX_TSEC1_SUPPORT
+	select MPC83XX_TSEC2_SUPPORT
+	select MPC83XX_PCIE1_SUPPORT
+	select MPC83XX_PCIE2_SUPPORT
+	select MPC83XX_SDHC_SUPPORT
+	select MPC83XX_SATA_SUPPORT
+	select MPC83XX_LDP_PIN
+	select MPC83XX_SECOND_I2C_SUPPORT
+
+config SYS_IMMR
+	hex "Value for IMMR"
+	default 0xE0000000
+	help
+	  Address for the Internal Memory-Mapped Registers (IMMR) window used
+	  to configure the features of the SoC.
+
+source "arch/powerpc/cpu/mpc83xx/hrcw/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/bats/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/lblaw/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/hid/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/arbiter/Kconfig"
+source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig"
+
+menu "Legacy options"
+
+if ARCH_MPC8349
+
+#TODO(mario.six@gdsys.cc): Remove when mpc83xx PCI has been converted to DM/DT
+choice
+	prompt "PMC slot configuration"
+
+config PCI_ALL_PCI1
+	bool "All PMC slots on PCI1"
+
+config PCI_ONE_PCI1
+	bool "First PMC1 on PCI1"
+
+config PCI_TWO_PCI1
+	bool "First two PMC1 on PCI1"
+
+endchoice
+
+config PCI_64BIT
+	bool "PMC2 is 64bit"
+
+endif
+
+endmenu
+
 source "board/esd/vme8349/Kconfig"
 source "board/freescale/mpc8308rdb/Kconfig"
 source "board/freescale/mpc8313erdb/Kconfig"

arch/powerpc/cpu/mpc83xx/Makefile

@@ -29,7 +29,9 @@ obj-y += interrupts.o
 obj-y += ecc.o
 obj-$(CONFIG_QE) += qe_io.o
 obj-$(CONFIG_FSL_SERDES) += serdes.o
+ifndef CONFIG_ARCH_MPC8308
 obj-$(CONFIG_PCI) += pci.o
+endif
 obj-$(CONFIG_PCIE) += pcie.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 

arch/powerpc/cpu/mpc83xx/arbiter/Kconfig

@@ -0,0 +1,139 @@
+menu "Arbiter"
+
+choice
+	prompt "Pipeline depth"
+
+config ACR_PIPE_DEP_UNSET
+	bool "Don't set value"
+
+config ACR_PIPE_DEP_1
+	bool "1"
+
+config ACR_PIPE_DEP_2
+	bool "2"
+
+config ACR_PIPE_DEP_3
+	bool "3"
+
+config ACR_PIPE_DEP_4
+	bool "4"
+
+endchoice
+
+choice
+	prompt "Repeat count"
+
+config ACR_RPTCNT_UNSET
+	bool "Don't set value"
+
+config ACR_RPTCNT_1
+	bool "1"
+
+config ACR_RPTCNT_2
+	bool "2"
+
+config ACR_RPTCNT_3
+	bool "3"
+
+config ACR_RPTCNT_4
+	bool "4"
+
+config ACR_RPTCNT_5
+	bool "5"
+
+config ACR_RPTCNT_6
+	bool "6"
+
+config ACR_RPTCNT_7
+	bool "7"
+
+config ACR_RPTCNT_8
+	bool "8"
+
+endchoice
+
+choice
+	prompt "Address parking"
+
+config ACR_APARK_UNSET
+	bool "Don't set value"
+
+config ACR_APARK_MASTER
+	bool "Park to master"
+
+config ACR_APARK_LAST
+	bool "Park to last owner"
+
+config ACR_APARK_DISABLE
+	bool "Disabled"
+
+endchoice
+
+choice
+	prompt "Parking master"
+
+config ACR_PARKM_UNSET
+	bool "Don't set value"
+
+config ACR_PARKM_E300
+	bool "e300 core"
+
+config ACR_PARKM_TSEC_1_2
+	bool "TSEC1, TSEC2"
+
+config ACR_PARKM_USB_I2C1_BOOT
+	bool "USB/I2C1_BOOT"
+
+config ACR_PARKM_DMA_ESDHC_USB
+	bool "DMA, ESDHC, USB"
+
+config ACR_PARKM_PEX
+	bool "PCI Express"
+
+if MPC83XX_QUICC_ENGINE
+
+config ACR_PARKM_ENC_CORE
+	bool "Encryption core"
+
+endif
+
+endchoice
+
+config ACR_PIPE_DEP
+	hex
+	default 0x0 if ACR_PIPE_DEP_UNSET
+	default 0x0 if ACR_PIPE_DEP_1
+	default 0x10000 if ACR_PIPE_DEP_2
+	default 0x20000 if ACR_PIPE_DEP_3
+	default 0x30000 if ACR_PIPE_DEP_4
+
+config ACR_RPTCNT
+	hex
+	default 0x0 if ACR_RPTCNT_UNSET
+	default 0x0 if ACR_RPTCNT_1
+	default 0x100 if ACR_RPTCNT_2
+	default 0x200 if ACR_RPTCNT_3
+	default 0x300 if ACR_RPTCNT_4
+	default 0x400 if ACR_RPTCNT_5
+	default 0x500 if ACR_RPTCNT_6
+	default 0x600 if ACR_RPTCNT_7
+	default 0x700 if ACR_RPTCNT_8
+
+config ACR_APARK
+	hex
+	default 0x0 if ACR_APARK_UNSET
+	default 0x0 if ACR_APARK_MASTER
+	default 0x10 if ACR_APARK_LAST
+	default 0x20 if ACR_APARK_DISABLE
+
+config ACR_PARKM
+	hex
+	default 0x0 if ACR_PARKM_UNSET
+	default 0x0 if ACR_PARKM_E300
+	default 0x2 if ACR_PARKM_TSEC_1_2
+	default 0x3 if ACR_PARKM_USB_I2C1_BOOT
+	default 0x4 if ACR_PARKM_DMA_ESDHC_USB
+	default 0x5 if ACR_PARKM_PEX
+	default 0x5 if ACR_PARKM_ENC_CORE
+
+endmenu

arch/powerpc/cpu/mpc83xx/arbiter/arbiter.h

@@ -0,0 +1,28 @@
+	const __be32 acr_mask =
+#ifndef CONFIG_ACR_PIPE_DEP_UNSET
+		ACR_PIPE_DEP |
+#endif
+#ifndef CONFIG_ACR_RPTCNT_UNSET
+		ACR_RPTCNT |
+#endif
+#ifndef CONFIG_ACR_APARK_UNSET
+		ACR_APARK |
+#endif
+#ifndef CONFIG_ACR_PARKM_UNSET
+		ACR_PARKM |
+#endif
+		0;
+	const __be32 acr_val =
+#ifndef CONFIG_ACR_PIPE_DEP_UNSET
+		CONFIG_ACR_PIPE_DEP |
+#endif
+#ifndef CONFIG_ACR_RPTCNT_UNSET
+		CONFIG_ACR_RPTCNT |
+#endif
+#ifndef CONFIG_ACR_APARK_UNSET
+		CONFIG_ACR_APARK |
+#endif
+#ifndef CONFIG_ACR_PARKM_UNSET
+		CONFIG_ACR_PARKM |
+#endif
+		0;

arch/powerpc/cpu/mpc83xx/bats/bats.h

@@ -0,0 +1,223 @@
+#ifdef CONFIG_BAT0
+#define CONFIG_SYS_IBAT0L (\
+		(CONFIG_BAT0_BASE) |\
+		(CONFIG_BAT0_PAGE_PROTECTION) |\
+		(CONFIG_BAT0_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT0U (\
+		(CONFIG_BAT0_BASE) |\
+		(CONFIG_BAT0_LENGTH) |\
+		(CONFIG_BAT0_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT0L (\
+		(CONFIG_BAT0_BASE) |\
+		(CONFIG_BAT0_PAGE_PROTECTION) |\
+		(CONFIG_BAT0_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT0U (\
+		(CONFIG_BAT0_BASE) |\
+		(CONFIG_BAT0_LENGTH) |\
+		(CONFIG_BAT0_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT0L (0)
+#define CONFIG_SYS_IBAT0U (0)
+#define CONFIG_SYS_DBAT0L (0)
+#define CONFIG_SYS_DBAT0U (0)
+#endif /* CONFIG_BAT0 */
+
+#ifdef CONFIG_BAT1
+#define CONFIG_SYS_IBAT1L (\
+		(CONFIG_BAT1_BASE) |\
+		(CONFIG_BAT1_PAGE_PROTECTION) |\
+		(CONFIG_BAT1_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT1U (\
+		(CONFIG_BAT1_BASE) |\
+		(CONFIG_BAT1_LENGTH) |\
+		(CONFIG_BAT1_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT1L (\
+		(CONFIG_BAT1_BASE) |\
+		(CONFIG_BAT1_PAGE_PROTECTION) |\
+		(CONFIG_BAT1_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT1U (\
+		(CONFIG_BAT1_BASE) |\
+		(CONFIG_BAT1_LENGTH) |\
+		(CONFIG_BAT1_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT1L (0)
+#define CONFIG_SYS_IBAT1U (0)
+#define CONFIG_SYS_DBAT1L (0)
+#define CONFIG_SYS_DBAT1U (0)
+#endif /* CONFIG_BAT1 */
+
+#ifdef CONFIG_BAT2
+#define CONFIG_SYS_IBAT2L (\
+		(CONFIG_BAT2_BASE) |\
+		(CONFIG_BAT2_PAGE_PROTECTION) |\
+		(CONFIG_BAT2_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT2U (\
+		(CONFIG_BAT2_BASE) |\
+		(CONFIG_BAT2_LENGTH) |\
+		(CONFIG_BAT2_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT2L (\
+		(CONFIG_BAT2_BASE) |\
+		(CONFIG_BAT2_PAGE_PROTECTION) |\
+		(CONFIG_BAT2_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT2U (\
+		(CONFIG_BAT2_BASE) |\
+		(CONFIG_BAT2_LENGTH) |\
+		(CONFIG_BAT2_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT2L (0)
+#define CONFIG_SYS_IBAT2U (0)
+#define CONFIG_SYS_DBAT2L (0)
+#define CONFIG_SYS_DBAT2U (0)
+#endif /* CONFIG_BAT2 */
+
+#ifdef CONFIG_BAT3
+#define CONFIG_SYS_IBAT3L (\
+		(CONFIG_BAT3_BASE) |\
+		(CONFIG_BAT3_PAGE_PROTECTION) |\
+		(CONFIG_BAT3_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT3U (\
+		(CONFIG_BAT3_BASE) |\
+		(CONFIG_BAT3_LENGTH) |\
+		(CONFIG_BAT3_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT3L (\
+		(CONFIG_BAT3_BASE) |\
+		(CONFIG_BAT3_PAGE_PROTECTION) |\
+		(CONFIG_BAT3_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT3U (\
+		(CONFIG_BAT3_BASE) |\
+		(CONFIG_BAT3_LENGTH) |\
+		(CONFIG_BAT3_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT3L (0)
+#define CONFIG_SYS_IBAT3U (0)
+#define CONFIG_SYS_DBAT3L (0)
+#define CONFIG_SYS_DBAT3U (0)
+#endif /* CONFIG_BAT3 */
+
+#ifdef CONFIG_BAT4
+#define CONFIG_SYS_IBAT4L (\
+		(CONFIG_BAT4_BASE) |\
+		(CONFIG_BAT4_PAGE_PROTECTION) |\
+		(CONFIG_BAT4_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT4U (\
+		(CONFIG_BAT4_BASE) |\
+		(CONFIG_BAT4_LENGTH) |\
+		(CONFIG_BAT4_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT4L (\
+		(CONFIG_BAT4_BASE) |\
+		(CONFIG_BAT4_PAGE_PROTECTION) |\
+		(CONFIG_BAT4_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT4U (\
+		(CONFIG_BAT4_BASE) |\
+		(CONFIG_BAT4_LENGTH) |\
+		(CONFIG_BAT4_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT4L (0)
+#define CONFIG_SYS_IBAT4U (0)
+#define CONFIG_SYS_DBAT4L (0)
+#define CONFIG_SYS_DBAT4U (0)
+#endif /* CONFIG_BAT4 */
+
+#ifdef CONFIG_BAT5
+#define CONFIG_SYS_IBAT5L (\
+		(CONFIG_BAT5_BASE) |\
+		(CONFIG_BAT5_PAGE_PROTECTION) |\
+		(CONFIG_BAT5_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT5U (\
+		(CONFIG_BAT5_BASE) |\
+		(CONFIG_BAT5_LENGTH) |\
+		(CONFIG_BAT5_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT5L (\
+		(CONFIG_BAT5_BASE) |\
+		(CONFIG_BAT5_PAGE_PROTECTION) |\
+		(CONFIG_BAT5_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT5U (\
+		(CONFIG_BAT5_BASE) |\
+		(CONFIG_BAT5_LENGTH) |\
+		(CONFIG_BAT5_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT5L (0)
+#define CONFIG_SYS_IBAT5U (0)
+#define CONFIG_SYS_DBAT5L (0)
+#define CONFIG_SYS_DBAT5U (0)
+#endif /* CONFIG_BAT5 */
+
+#ifdef CONFIG_BAT6
+#define CONFIG_SYS_IBAT6L (\
+		(CONFIG_BAT6_BASE) |\
+		(CONFIG_BAT6_PAGE_PROTECTION) |\
+		(CONFIG_BAT6_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT6U (\
+		(CONFIG_BAT6_BASE) |\
+		(CONFIG_BAT6_LENGTH) |\
+		(CONFIG_BAT6_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT6L (\
+		(CONFIG_BAT6_BASE) |\
+		(CONFIG_BAT6_PAGE_PROTECTION) |\
+		(CONFIG_BAT6_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT6U (\
+		(CONFIG_BAT6_BASE) |\
+		(CONFIG_BAT6_LENGTH) |\
+		(CONFIG_BAT6_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT6L (0)
+#define CONFIG_SYS_IBAT6U (0)
+#define CONFIG_SYS_DBAT6L (0)
+#define CONFIG_SYS_DBAT6U (0)
+#endif /* CONFIG_BAT6 */
+
+#ifdef CONFIG_BAT7
+#define CONFIG_SYS_IBAT7L (\
+		(CONFIG_BAT7_BASE) |\
+		(CONFIG_BAT7_PAGE_PROTECTION) |\
+		(CONFIG_BAT7_WIMG_ICACHE) \
+		)
+#define CONFIG_SYS_IBAT7U (\
+		(CONFIG_BAT7_BASE) |\
+		(CONFIG_BAT7_LENGTH) |\
+		(CONFIG_BAT7_VALID_BITS) \
+		)
+#define CONFIG_SYS_DBAT7L (\
+		(CONFIG_BAT7_BASE) |\
+		(CONFIG_BAT7_PAGE_PROTECTION) |\
+		(CONFIG_BAT7_WIMG_DCACHE) \
+		)
+#define CONFIG_SYS_DBAT7U (\
+		(CONFIG_BAT7_BASE) |\
+		(CONFIG_BAT7_LENGTH) |\
+		(CONFIG_BAT7_VALID_BITS) \
+		)
+#else
+#define CONFIG_SYS_IBAT7L (0)
+#define CONFIG_SYS_IBAT7U (0)
+#define CONFIG_SYS_DBAT7L (0)
+#define CONFIG_SYS_DBAT7U (0)
+#endif /* CONFIG_BAT7 */

arch/powerpc/cpu/mpc83xx/cpu.c

@@ -18,7 +18,7 @@
 #include <tsec.h>
 #include <netdev.h>
 #include <fsl_esdhc.h>
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_MPC831x)
+#if defined(CONFIG_BOOTCOUNT_LIMIT) && !defined(CONFIG_ARCH_MPC831X)
 #include <linux/immap_qe.h>
 #include <asm/io.h>
 #endif
@@ -133,18 +133,18 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 #ifdef MPC83xx_RESET
 
 	/* Interrupts and MMU off */
-	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
-
-	msr &= ~( MSR_EE | MSR_IR | MSR_DR);
-	__asm__ __volatile__ ("mtmsr    %0"::"r" (msr));
+	msr = mfmsr();
+	msr &= ~(MSR_EE | MSR_IR | MSR_DR);
+	mtmsr(msr);
 
 	/* enable Reset Control Reg */
 	immap->reset.rpr = 0x52535445;
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("isync");
+	sync();
+	isync();
 
 	/* confirm Reset Control Reg is enabled */
-	while(!((immap->reset.rcer) & RCER_CRE));
+	while(!((immap->reset.rcer) & RCER_CRE))
+		;
 
 	udelay(200);
 
@@ -156,10 +156,9 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 	immap->reset.rmr = RMR_CSRE;    /* Checkstop Reset enable */
 
 	/* Interrupts and MMU off */
-	__asm__ __volatile__ ("mfmsr    %0":"=r" (msr):);
-
+	msr = mfmsr();
 	msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
-	__asm__ __volatile__ ("mtmsr    %0"::"r" (msr));
+	mtmsr(msr);
 
 	/*
 	 * Trying to execute the next instruction at a non-existing address
@@ -199,6 +198,7 @@ void watchdog_reset (void)
 }
 #endif
 
+#ifndef CONFIG_DM_ETH
 /*
  * Initializes on-chip ethernet controllers.
  * to override, implement board_eth_init()
@@ -214,6 +214,7 @@ int cpu_eth_init(bd_t *bis)
 #endif
 	return 0;
 }
+#endif /* !CONFIG_DM_ETH */
 
 /*
  * Initializes on-chip MMC controllers.
@@ -227,3 +228,21 @@ int cpu_mmc_init(bd_t *bis)
 	return 0;
 #endif
 }
+
+void ppcDWstore(unsigned int *addr, unsigned int *value)
+{
+	asm("lfd 1, 0(%1)\n\t"
+	    "stfd 1, 0(%0)"
+	    :
+	    : "r" (addr), "r" (value)
+	    : "memory");
+}
+
+void ppcDWload(unsigned int *addr, unsigned int *ret)
+{
+	asm("lfd 1, 0(%0)\n\t"
+	    "stfd 1, 0(%1)"
+	    :
+	    : "r" (addr), "r" (ret)
+	    : "memory");
+}

arch/powerpc/cpu/mpc83xx/cpu_init.c

@@ -12,6 +12,12 @@
 #include <usb/ehci-ci.h>
 #endif
 
+#include "lblaw/lblaw.h"
+#include "elbc/elbc.h"
+#include "sysio/sysio.h"
+#include "arbiter/arbiter.h"
+#include "initreg/initreg.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_QE
@@ -47,62 +53,6 @@ static void config_qe_ioports(void)
  */
 void cpu_init_f (volatile immap_t * im)
 {
-	__be32 acr_mask =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
-		ACR_PIPE_DEP |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
-		ACR_RPTCNT |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK	/* Arbiter address parking mode */
-		ACR_APARK |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM	/* Arbiter parking master */
-		ACR_PARKM |
-#endif
-		0;
-	__be32 acr_val =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
-		(CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
-		(CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK	/* Arbiter address parking mode */
-		(CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM	/* Arbiter parking master */
-		(CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
-#endif
-		0;
-	__be32 spcr_mask =
-#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
-		SPCR_OPT |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
-		SPCR_TSECEP |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
-		SPCR_TSEC1EP |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
-		SPCR_TSEC2EP |
-#endif
-		0;
-	__be32 spcr_val =
-#ifdef CONFIG_SYS_SPCR_OPT
-		(CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
-		(CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
-		(CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
-		(CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
-#endif
-		0;
 	__be32 sccr_mask =
 #ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
 		SCCR_ENCCM |
@@ -177,28 +127,6 @@ void cpu_init_f (volatile immap_t * im)
 #endif
 #ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
 		(CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
-#endif
-		0;
-	__be32 lcrr_mask =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
-		LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
-		LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
-		LCRR_CLKDIV |
-#endif
-		0;
-	__be32 lcrr_val =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
-		CONFIG_SYS_LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC
-		CONFIG_SYS_LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
-		CONFIG_SYS_LCRR_CLKDIV |
 #endif
 		0;
 
@@ -240,7 +168,7 @@ void cpu_init_f (volatile immap_t * im)
 
 	/* System General Purpose Register */
 #ifdef CONFIG_SYS_SICRH
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
+#if defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC8313)
 	/* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
 	__raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
 		     &im->sysconf.sicrh);
@@ -312,7 +240,7 @@ void cpu_init_f (volatile immap_t * im)
 	im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
 	im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
 #endif
-#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_MPC831x)
+#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_ARCH_MPC831X)
 	uint32_t temp;
 	struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR;
 

arch/powerpc/cpu/mpc83xx/ecc.c

@@ -191,8 +191,8 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 			}
 
 			ddr->err_disable = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
+			sync();
+			isync();
 			return 0;
 		} else if (strcmp(argv[1], "errdetectclr") == 0) {
 			val = ddr->err_detect;
@@ -249,8 +249,8 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 				printf("Incorrect command\n");
 
 			ddr->ecc_err_inject = val;
-			__asm__ __volatile__("sync");
-			__asm__ __volatile__("isync");
+			sync();
+			isync();
 			return 0;
 		} else if (strcmp(argv[1], "mirror") == 0) {
 			val = ddr->ecc_err_inject;
@@ -282,26 +282,26 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 
 				/* enable injects */
 				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
+				sync();
+				isync();
 
 				/* write memory location injecting errors */
 				ppcDWstore((u32 *) i, pattern);
-				__asm__ __volatile__("sync");
+				sync();
 
 				/* disable injects */
 				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
+				sync();
+				isync();
 
 				/* read data, this generates ECC error */
 				ppcDWload((u32 *) i, ret);
-				__asm__ __volatile__("sync");
+				sync();
 
 				/* re-initialize memory, double word write the location again,
 				 * generates new ECC code this time */
 				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
+				sync();
 			}
 			enable_interrupts();
 			return 0;
@@ -321,29 +321,29 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 
 				/* enable injects */
 				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
+				sync();
+				isync();
 
 				/* write memory location injecting errors */
 				*(u32 *) i = 0xfedcba98UL;
-				__asm__ __volatile__("sync");
+				sync();
 
 				/* sub double word write,
 				 * bus will read-modify-write,
 				 * generates ECC error */
 				*((u32 *) i + 1) = 0x76543210UL;
-				__asm__ __volatile__("sync");
+				sync();
 
 				/* disable injects */
 				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
-				__asm__ __volatile__("sync");
-				__asm__ __volatile__("isync");
+				sync();
+				isync();
 
 				/* re-initialize memory,
 				 * double word write the location again,
 				 * generates new ECC code this time */
 				ppcDWstore((u32 *) i, writeback);
-				__asm__ __volatile__("sync");
+				sync();
 			}
 			enable_interrupts();
 			return 0;

arch/powerpc/cpu/mpc83xx/elbc/Kconfig

@@ -0,0 +1,32 @@
+menu "ELBC register setup"
+
+choice
+	prompt "OR/BR for NAND SPL"
+
+config ELBC_BR_OR_NAND_PRELIM_NONE
+	bool "None"
+
+config ELBC_BR_OR_NAND_PRELIM_0
+	bool "0"
+
+config ELBC_BR_OR_NAND_PRELIM_1
+	bool "1"
+
+config ELBC_BR_OR_NAND_PRELIM_2
+	bool "2"
+
+config ELBC_BR_OR_NAND_PRELIM_3
+	bool "3"
+
+config ELBC_BR_OR_NAND_PRELIM_4
+	bool "4"
+
+endchoice
+
+source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0"
+source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1"
+source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2"
+source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3"
+source "arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4"
+
+endmenu

arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0

@@ -0,0 +1,733 @@
+menuconfig ELBC_BR0_OR0
+	bool "ELBC BR0/OR0"
+
+if ELBC_BR0_OR0
+
+config BR0_OR0_NAME
+	string "Identifier"
+
+config BR0_OR0_BASE
+	hex "Port base"
+
+choice
+	prompt "Port size"
+
+config BR0_PORTSIZE_8BIT
+	bool "8-bit"
+
+config BR0_PORTSIZE_16BIT
+	depends on !BR0_MACHINE_FCM
+	bool "16-bit"
+
+
+config BR0_PORTSIZE_32BIT
+	depends on !BR0_MACHINE_FCM
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	bool "32-bit"
+
+endchoice
+
+if BR0_MACHINE_FCM
+
+choice
+	prompt "Data Error Checking"
+
+config BR0_ERRORCHECKING_DISABLED
+	bool "Disabled"
+
+config BR0_ERRORCHECKING_ECC_CHECKING
+	bool "ECC checking / No ECC generation"
+
+config BR0_ERRORCHECKING_BOTH
+	bool "ECC checking and generation"
+
+endchoice
+
+endif
+
+config BR0_WRITE_PROTECT
+	bool "Write-protect"
+
+config BR0_MACHINE_UPM
+	bool
+
+choice
+	prompt "Machine select"
+
+config BR0_MACHINE_GPCM
+	bool "GPCM"
+
+config BR0_MACHINE_FCM
+	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	bool "FCM"
+
+config BR0_MACHINE_SDRAM
+	depends on ARCH_MPC8349 || ARCH_MPC8360
+	bool "SDRAM"
+
+config BR0_MACHINE_UPMA
+	select BR0_MACHINE_UPM
+	bool "UPM (A)"
+
+config BR0_MACHINE_UPMB
+	select BR0_MACHINE_UPM
+	bool "UPM (B)"
+
+config BR0_MACHINE_UPMC
+	select BR0_MACHINE_UPM
+	bool "UPM (C)"
+
+endchoice
+
+if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360
+
+choice
+	prompt "Atomic operations"
+
+config BR0_ATOMIC_NONE
+	bool "No atomic operations"
+
+config BR0_ATOMIC_RAWA
+	bool "Read-after-write-atomic"
+
+config BR0_ATOMIC_WARA
+	bool "Write-after-read-atomic"
+
+endchoice
+
+endif
+
+if BR0_MACHINE_GPCM || BR0_MACHINE_FCM || BR0_MACHINE_UPM || BR0_MACHINE_SDRAM
+
+choice
+	prompt "Address mask"
+
+config OR0_AM_32_KBYTES
+	depends on !BR0_MACHINE_SDRAM
+	bool "32 kb"
+
+config OR0_AM_64_KBYTES
+	bool "64 kb"
+
+config OR0_AM_128_KBYTES
+	bool "128 kb"
+
+config OR0_AM_256_KBYTES
+	bool "256 kb"
+
+config OR0_AM_512_KBYTES
+	bool "512 kb"
+
+config OR0_AM_1_MBYTES
+	bool "1 mb"
+
+config OR0_AM_2_MBYTES
+	bool "2 mb"
+
+config OR0_AM_4_MBYTES
+	bool "4 mb"
+
+config OR0_AM_8_MBYTES
+	bool "8 mb"
+
+config OR0_AM_16_MBYTES
+	bool "16 mb"
+
+config OR0_AM_32_MBYTES
+	bool "32 mb"
+
+config OR0_AM_64_MBYTES
+	bool "64 mb"
+
+# XXX: Some boards define 128MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR0_AM_128_MBYTES
+	bool "128 mb"
+
+# XXX: Some boards define 256MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR0_AM_256_MBYTES
+	bool "256 mb"
+
+config OR0_AM_512_MBYTES
+	depends on BR0_MACHINE_FCM
+	bool "512 mb"
+
+# XXX: Some boards define 1GB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR0_AM_1_GBYTES
+	bool "1 gb"
+
+config OR0_AM_2_GBYTES
+	depends on BR0_MACHINE_FCM
+	bool "2 gb"
+
+config OR0_AM_4_GBYTES
+	depends on BR0_MACHINE_FCM
+	bool "4 gb"
+
+endchoice
+
+config OR0_XAM_SET
+	bool "Set unused bytes after address mask"
+choice
+	prompt "Buffer control disable"
+
+config OR0_BCTLD_ASSERTED
+	bool "Asserted"
+
+config OR0_BCTLD_NOT_ASSERTED
+	bool "Not asserted"
+
+endchoice
+
+endif
+
+if BR0_MACHINE_GPCM || BR0_MACHINE_FCM
+
+choice
+	prompt "Cycle length in bus clocks"
+
+config OR0_SCY_0
+	bool "No wait states"
+
+config OR0_SCY_1
+	bool "1 wait state"
+
+config OR0_SCY_2
+	bool "2 wait states"
+
+config OR0_SCY_3
+	bool "3 wait states"
+
+config OR0_SCY_4
+	bool "4 wait states"
+
+config OR0_SCY_5
+	bool "5 wait states"
+
+config OR0_SCY_6
+	bool "6 wait states"
+
+config OR0_SCY_7
+	bool "7 wait states"
+
+config OR0_SCY_8
+	depends on BR0_MACHINE_GPCM
+	bool "8 wait states"
+
+config OR0_SCY_9
+	depends on BR0_MACHINE_GPCM
+	bool "9 wait states"
+
+config OR0_SCY_10
+	depends on BR0_MACHINE_GPCM
+	bool "10 wait states"
+
+config OR0_SCY_11
+	depends on BR0_MACHINE_GPCM
+	bool "11 wait states"
+
+config OR0_SCY_12
+	depends on BR0_MACHINE_GPCM
+	bool "12 wait states"
+
+config OR0_SCY_13
+	depends on BR0_MACHINE_GPCM
+	bool "13 wait states"
+
+config OR0_SCY_14
+	depends on BR0_MACHINE_GPCM
+	bool "14 wait states"
+
+config OR0_SCY_15
+	depends on BR0_MACHINE_GPCM
+	bool "15 wait states"
+
+endchoice
+
+endif # BR0_MACHINE_GPCM || BR0_MACHINE_FCM
+
+if BR0_MACHINE_GPCM
+
+choice
+	prompt "Chip select negotiation time"
+
+config OR0_CSNT_NORMAL
+	bool "Normal"
+
+config OR0_CSNT_EARLIER
+	bool "Earlier"
+
+endchoice
+
+choice
+	prompt "Address to chip-select setup"
+
+config OR0_ACS_SAME_TIME
+	bool "At the same time"
+
+config OR0_ACS_HALF_CYCLE_EARLIER
+	bool "Half of a bus clock cycle earlier"
+
+config OR0_ACS_QUARTER_CYCLE_EARLIER
+	bool "Half/Quarter of a bus clock cycle earlier"
+
+endchoice
+
+choice
+	prompt "Extra address to check-select setup"
+
+config OR0_XACS_NORMAL
+	bool "Normal"
+
+config OR0_XACS_EXTENDED
+	bool "Extended"
+
+endchoice
+
+choice
+	prompt "External address termination"
+
+config OR0_SETA_INTERNAL
+	bool "Access is terminated internally"
+
+config OR0_SETA_EXTERNAL
+	bool "Access is terminated externally"
+
+endchoice
+
+endif # BR0_MACHINE_GPCM
+
+if BR0_MACHINE_FCM
+
+choice
+	prompt "NAND Flash EEPROM page size"
+
+config OR0_PGS_SMALL
+	bool "Small page device"
+
+config OR0_PGS_LARGE
+	bool "Large page device"
+
+endchoice
+
+choice
+	prompt "Chip select to command time"
+
+config OR0_CSCT_1_CYCLE
+	depends on OR0_TRLX_NORMAL
+	bool "1 cycle"
+
+config OR0_CSCT_2_CYCLE
+	depends on OR0_TRLX_RELAXED
+	bool "2 cycles"
+
+config OR0_CSCT_4_CYCLE
+	depends on OR0_TRLX_NORMAL
+	bool "4 cycles"
+
+config OR0_CSCT_8_CYCLE
+	depends on OR0_TRLX_RELAXED
+	bool "8 cycles"
+
+endchoice
+
+choice
+	prompt "Command setup time"
+
+config OR0_CST_COINCIDENT
+	depends on OR0_TRLX_NORMAL
+	bool "Coincident with any command"
+
+config OR0_CST_QUARTER_CLOCK
+	depends on OR0_TRLX_NORMAL
+	bool "0.25 clocks after"
+
+config OR0_CST_HALF_CLOCK
+	depends on OR0_TRLX_RELAXED
+	bool "0.5 clocks after"
+
+config OR0_CST_ONE_CLOCK
+	depends on OR0_TRLX_RELAXED
+	bool "1 clock after"
+
+endchoice
+
+choice
+	prompt "Command hold time"
+
+config OR0_CHT_HALF_CLOCK
+	depends on OR0_TRLX_NORMAL
+	bool "0.5 clocks before"
+
+config OR0_CHT_ONE_CLOCK
+	depends on OR0_TRLX_NORMAL
+	bool "1 clock before"
+
+config OR0_CHT_ONE_HALF_CLOCK
+	depends on OR0_TRLX_RELAXED
+	bool "1.5 clocks before"
+
+config OR0_CHT_TWO_CLOCK
+	depends on OR0_TRLX_RELAXED
+	bool "2 clocks before"
+
+endchoice
+
+choice
+	prompt "Reset setup time"
+
+config OR0_RST_THREE_QUARTER_CLOCK
+	depends on OR0_TRLX_NORMAL
+	bool "0.75 clocks prior"
+
+config OR0_RST_ONE_HALF_CLOCK
+	depends on OR0_TRLX_RELAXED
+	bool "0.5 clocks prior"
+
+config OR0_RST_ONE_CLOCK
+	bool "1 clock prior"
+
+endchoice
+
+endif # BR0_MACHINE_FCM
+
+if BR0_MACHINE_UPM
+
+choice
+	prompt "Burst inhibit"
+
+config OR0_BI_BURSTSUPPORT
+	bool "Support burst access"
+
+config OR0_BI_BURSTINHIBIT
+	bool "Inhibit burst access"
+
+endchoice
+
+endif # BR0_MACHINE_UPM
+
+if BR0_MACHINE_SDRAM
+
+choice
+	prompt "Number of column address lines"
+
+config OR0_COLS_7
+	bool "7"
+
+config OR0_COLS_8
+	bool "8"
+
+config OR0_COLS_9
+	bool "9"
+
+config OR0_COLS_10
+	bool "10"
+
+config OR0_COLS_11
+	bool "11"
+
+config OR0_COLS_12
+	bool "12"
+
+config OR0_COLS_13
+	bool "13"
+
+config OR0_COLS_14
+	bool "14"
+
+endchoice
+
+choice
+	prompt "Number of rows address lines"
+
+config OR0_ROWS_9
+	bool "9"
+
+config OR0_ROWS_10
+	bool "10"
+
+config OR0_ROWS_11
+	bool "11"
+
+config OR0_ROWS_12
+	bool "12"
+
+config OR0_ROWS_13
+	bool "13"
+
+config OR0_ROWS_14
+	bool "14"
+
+config OR0_ROWS_15
+	bool "15"
+
+endchoice
+
+choice
+	prompt "Page mode select"
+
+config OR0_PMSEL_BTB
+	bool "Back-to-back"
+
+config OR0_PMSEL_KEPT_OPEN
+	bool "Page kept open until page miss or refresh"
+
+endchoice
+
+endif # BR0_MACHINE_SDRAM
+
+choice
+	prompt "Relaxed timing"
+
+config OR0_TRLX_NORMAL
+	bool "Normal"
+
+config OR0_TRLX_RELAXED
+	bool "Relaxed"
+
+endchoice
+
+choice
+	prompt "Extended hold time"
+
+config OR0_EHTR_NORMAL
+	depends on OR0_TRLX_NORMAL
+	bool "Normal"
+
+config OR0_EHTR_1_CYCLE
+	depends on OR0_TRLX_NORMAL
+	bool "1 idle clock cycle inserted"
+
+config OR0_EHTR_4_CYCLE
+	depends on OR0_TRLX_RELAXED
+	bool "4 idle clock cycles inserted"
+
+config OR0_EHTR_8_CYCLE
+	depends on OR0_TRLX_RELAXED
+	bool "8 idle clock cycles inserted"
+
+endchoice
+
+if !ARCH_MPC8308
+
+choice
+	prompt "External address latch delay"
+
+config OR0_EAD_NONE
+	bool "None"
+
+config OR0_EAD_EXTRA
+	bool "Extra"
+
+endchoice
+
+endif # !ARCH_MPC8308
+
+endif # ELBC_BR0_OR0
+
+config BR0_PORTSIZE
+	hex
+	default 0x800 if BR0_PORTSIZE_8BIT
+	default 0x1000 if BR0_PORTSIZE_16BIT
+	default 0x1800 if BR0_PORTSIZE_32BIT
+
+config BR0_ERRORCHECKING
+	hex
+	default 0x0 if !BR0_MACHINE_FCM
+	default 0x0 if BR0_ERRORCHECKING_DISABLED
+	default 0x200 if BR0_ERRORCHECKING_ECC_CHECKING
+	default 0x400 if BR0_ERRORCHECKING_BOTH
+
+config BR0_WRITE_PROTECT_BIT
+	hex
+	default 0x0 if !BR0_WRITE_PROTECT
+	default 0x100 if BR0_WRITE_PROTECT
+
+config BR0_MACHINE
+	hex
+	default 0x0 if BR0_MACHINE_GPCM
+	default 0x20 if BR0_MACHINE_FCM
+	default 0x60 if BR0_MACHINE_SDRAM
+	default 0x80 if BR0_MACHINE_UPMA
+	default 0xa0 if BR0_MACHINE_UPMB
+	default 0xc0 if BR0_MACHINE_UPMC
+
+config BR0_ATOMIC
+	hex
+	default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360
+	default 0x0 if BR0_ATOMIC_NONE
+	default 0x4 if BR0_ATOMIC_RAWA
+	default 0x8 if BR0_ATOMIC_WARA
+
+config BR0_VALID_BIT
+	hex
+	default 0x0 if !ELBC_BR0_OR0
+	default 0x1 if ELBC_BR0_OR0
+
+config OR0_AM
+	hex
+	default 0xffff8000 if OR0_AM_32_KBYTES && !BR0_MACHINE_SDRAM
+	default 0xffff0000 if OR0_AM_64_KBYTES
+	default 0xfffe0000 if OR0_AM_128_KBYTES
+	default 0xfffc0000 if OR0_AM_256_KBYTES
+	default 0xfff80000 if OR0_AM_512_KBYTES
+	default 0xfff00000 if OR0_AM_1_MBYTES
+	default 0xffe00000 if OR0_AM_2_MBYTES
+	default 0xffc00000 if OR0_AM_4_MBYTES
+	default 0xff800000 if OR0_AM_8_MBYTES
+	default 0xff000000 if OR0_AM_16_MBYTES
+	default 0xfe000000 if OR0_AM_32_MBYTES
+	default 0xfc000000 if OR0_AM_64_MBYTES
+	default 0xf8000000 if OR0_AM_128_MBYTES
+	default 0xf0000000 if OR0_AM_256_MBYTES
+	default 0xe0000000 if OR0_AM_512_MBYTES
+	default 0xc0000000 if OR0_AM_1_GBYTES
+	default 0x80000000 if OR0_AM_2_GBYTES
+	default 0x00000000 if OR0_AM_4_GBYTES
+
+config OR0_XAM
+	hex
+	default 0x0 if !OR0_XAM_SET
+	default 0x6000 if OR0_XAM_SET
+
+config OR0_BCTLD
+	hex
+	default 0x0 if OR0_BCTLD_ASSERTED
+	default 0x1000 if OR0_BCTLD_NOT_ASSERTED
+
+config OR0_BI
+	hex
+	default 0x0 if !BR0_MACHINE_UPM
+	default 0x0 if OR0_BI_BURSTSUPPORT
+	default 0x100 if OR0_BI_BURSTINHIBIT
+
+config OR0_COLS
+	hex
+	default 0x0 if !BR0_MACHINE_SDRAM
+	default 0x0 if OR0_COLS_7
+	default 0x400 if OR0_COLS_8
+	default 0x800 if OR0_COLS_9
+	default 0xc00 if OR0_COLS_10
+	default 0x1000 if OR0_COLS_11
+	default 0x1400 if OR0_COLS_12
+	default 0x1800 if OR0_COLS_13
+	default 0x1c00 if OR0_COLS_14
+
+config OR0_ROWS
+	hex
+	default 0x0 if !BR0_MACHINE_SDRAM
+	default 0x0 if OR0_ROWS_9
+	default 0x40 if OR0_ROWS_10
+	default 0x80 if OR0_ROWS_11
+	default 0xc0 if OR0_ROWS_12
+	default 0x100 if OR0_ROWS_13
+	default 0x140 if OR0_ROWS_14
+	default 0x180 if OR0_ROWS_15
+
+config OR0_PMSEL
+	hex
+	default 0x0 if !BR0_MACHINE_SDRAM
+	default 0x0 if OR0_PMSEL_BTB
+	default 0x20 if OR0_PMSEL_KEPT_OPEN
+
+config OR0_SCY
+	hex
+	default 0x0 if !BR0_MACHINE_GPCM && !BR0_MACHINE_FCM
+	default 0x0 if OR0_SCY_0
+	default 0x10 if OR0_SCY_1
+	default 0x20 if OR0_SCY_2
+	default 0x30 if OR0_SCY_3
+	default 0x40 if OR0_SCY_4
+	default 0x50 if OR0_SCY_5
+	default 0x60 if OR0_SCY_6
+	default 0x70 if OR0_SCY_7
+	default 0x80 if OR0_SCY_8
+	default 0x90 if OR0_SCY_9
+	default 0xa0 if OR0_SCY_10
+	default 0xb0 if OR0_SCY_11
+	default 0xc0 if OR0_SCY_12
+	default 0xd0 if OR0_SCY_13
+	default 0xe0 if OR0_SCY_14
+	default 0xf0 if OR0_SCY_15
+
+config OR0_PGS
+	hex
+	default 0x0 if !BR0_MACHINE_FCM
+	default 0x0 if OR0_PGS_SMALL
+	default 0x400 if OR0_PGS_LARGE
+
+config OR0_CSCT
+	hex
+	default 0x0 if !BR0_MACHINE_FCM
+	default 0x0 if OR0_CSCT_1_CYCLE
+	default 0x0 if OR0_CSCT_2_CYCLE
+	default 0x200 if OR0_CSCT_4_CYCLE
+	default 0x200 if OR0_CSCT_8_CYCLE
+
+config OR0_CST
+	hex
+	default 0x0 if !BR0_MACHINE_FCM
+	default 0x0 if OR0_CST_COINCIDENT
+	default 0x100 if OR0_CST_QUARTER_CLOCK
+	default 0x0 if OR0_CST_HALF_CLOCK
+	default 0x100 if OR0_CST_ONE_CLOCK
+
+config OR0_CHT
+	hex
+	default 0x0 if !BR0_MACHINE_FCM
+	default 0x0 if OR0_CHT_HALF_CLOCK
+	default 0x80 if OR0_CHT_ONE_CLOCK
+	default 0x0 if OR0_CHT_ONE_HALF_CLOCK
+	default 0x80 if OR0_CHT_TWO_CLOCK
+
+config OR0_RST
+	hex
+	default 0x0 if !BR0_MACHINE_FCM
+	default 0x0 if OR0_RST_THREE_QUARTER_CLOCK
+	default 0x8 if OR0_RST_ONE_CLOCK
+	default 0x0 if OR0_RST_ONE_HALF_CLOCK
+
+config OR0_CSNT
+	hex
+	default 0x0 if !BR0_MACHINE_GPCM
+	default 0x0 if OR0_CSNT_NORMAL
+	default 0x800 if OR0_CSNT_EARLIER
+
+config OR0_ACS
+	hex
+	default 0x0 if !BR0_MACHINE_GPCM
+	default 0x0 if OR0_ACS_SAME_TIME
+	default 0x400 if OR0_ACS_QUARTER_CYCLE_EARLIER
+	default 0x600 if OR0_ACS_HALF_CYCLE_EARLIER
+
+config OR0_XACS
+	hex
+	default 0x0 if !BR0_MACHINE_GPCM
+	default 0x0 if OR0_XACS_NORMAL
+	default 0x100 if OR0_XACS_EXTENDED
+
+config OR0_SETA
+	hex
+	default 0x0 if !BR0_MACHINE_GPCM
+	default 0x0 if OR0_SETA_INTERNAL
+	default 0x8 if OR0_SETA_EXTERNAL
+
+config OR0_TRLX
+	hex
+	default 0x0 if OR0_TRLX_NORMAL
+	default 0x4 if OR0_TRLX_RELAXED
+
+config OR0_EHTR
+	hex
+	default 0x0 if OR0_EHTR_NORMAL
+	default 0x2 if OR0_EHTR_1_CYCLE
+	default 0x0 if OR0_EHTR_4_CYCLE
+	default 0x2 if OR0_EHTR_8_CYCLE
+
+config OR0_EAD
+	hex
+	default 0x0 if ARCH_MPC8308
+	default 0x0 if OR0_EAD_NONE
+	default 0x1 if OR0_EAD_EXTRA

arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc1

@@ -0,0 +1,733 @@
+menuconfig ELBC_BR1_OR1
+	bool "ELBC BR1/OR1"
+
+if ELBC_BR1_OR1
+
+config BR1_OR1_NAME
+	string "Identifier"
+
+config BR1_OR1_BASE
+	hex "Port base"
+
+choice
+	prompt "Port size"
+
+config BR1_PORTSIZE_8BIT
+	bool "8-bit"
+
+config BR1_PORTSIZE_16BIT
+	depends on !BR1_MACHINE_FCM
+	bool "16-bit"
+
+
+config BR1_PORTSIZE_32BIT
+	depends on !BR1_MACHINE_FCM
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	bool "32-bit"
+
+endchoice
+
+if BR1_MACHINE_FCM
+
+choice
+	prompt "Data Error Checking"
+
+config BR1_ERRORCHECKING_DISABLED
+	bool "Disabled"
+
+config BR1_ERRORCHECKING_ECC_CHECKING
+	bool "ECC checking / No ECC generation"
+
+config BR1_ERRORCHECKING_BOTH
+	bool "ECC checking and generation"
+
+endchoice
+
+endif
+
+config BR1_WRITE_PROTECT
+	bool "Write-protect"
+
+config BR1_MACHINE_UPM
+	bool
+
+choice
+	prompt "Machine select"
+
+config BR1_MACHINE_GPCM
+	bool "GPCM"
+
+config BR1_MACHINE_FCM
+	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	bool "FCM"
+
+config BR1_MACHINE_SDRAM
+	depends on ARCH_MPC8349 || ARCH_MPC8360
+	bool "SDRAM"
+
+config BR1_MACHINE_UPMA
+	select BR1_MACHINE_UPM
+	bool "UPM (A)"
+
+config BR1_MACHINE_UPMB
+	select BR1_MACHINE_UPM
+	bool "UPM (B)"
+
+config BR1_MACHINE_UPMC
+	select BR1_MACHINE_UPM
+	bool "UPM (C)"
+
+endchoice
+
+if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360
+
+choice
+	prompt "Atomic operations"
+
+config BR1_ATOMIC_NONE
+	bool "No atomic operations"
+
+config BR1_ATOMIC_RAWA
+	bool "Read-after-write-atomic"
+
+config BR1_ATOMIC_WARA
+	bool "Write-after-read-atomic"
+
+endchoice
+
+endif
+
+if BR1_MACHINE_GPCM || BR1_MACHINE_FCM || BR1_MACHINE_UPM || BR1_MACHINE_SDRAM
+
+choice
+	prompt "Address mask"
+
+config OR1_AM_32_KBYTES
+	depends on !BR1_MACHINE_SDRAM
+	bool "32 kb"
+
+config OR1_AM_64_KBYTES
+	bool "64 kb"
+
+config OR1_AM_128_KBYTES
+	bool "128 kb"
+
+config OR1_AM_256_KBYTES
+	bool "256 kb"
+
+config OR1_AM_512_KBYTES
+	bool "512 kb"
+
+config OR1_AM_1_MBYTES
+	bool "1 mb"
+
+config OR1_AM_2_MBYTES
+	bool "2 mb"
+
+config OR1_AM_4_MBYTES
+	bool "4 mb"
+
+config OR1_AM_8_MBYTES
+	bool "8 mb"
+
+config OR1_AM_16_MBYTES
+	bool "16 mb"
+
+config OR1_AM_32_MBYTES
+	bool "32 mb"
+
+config OR1_AM_64_MBYTES
+	bool "64 mb"
+
+# XXX: Some boards define 128MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR1_AM_128_MBYTES
+	bool "128 mb"
+
+# XXX: Some boards define 256MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR1_AM_256_MBYTES
+	bool "256 mb"
+
+config OR1_AM_512_MBYTES
+	depends on BR1_MACHINE_FCM
+	bool "512 mb"
+
+# XXX: Some boards define 1GB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR1_AM_1_GBYTES
+	bool "1 gb"
+
+config OR1_AM_2_GBYTES
+	depends on BR1_MACHINE_FCM
+	bool "2 gb"
+
+config OR1_AM_4_GBYTES
+	depends on BR1_MACHINE_FCM
+	bool "4 gb"
+
+endchoice
+
+config OR1_XAM_SET
+	bool "Set unused bytes after address mask"
+choice
+	prompt "Buffer control disable"
+
+config OR1_BCTLD_ASSERTED
+	bool "Asserted"
+
+config OR1_BCTLD_NOT_ASSERTED
+	bool "Not asserted"
+
+endchoice
+
+endif
+
+if BR1_MACHINE_GPCM || BR1_MACHINE_FCM
+
+choice
+	prompt "Cycle length in bus clocks"
+
+config OR1_SCY_0
+	bool "No wait states"
+
+config OR1_SCY_1
+	bool "1 wait state"
+
+config OR1_SCY_2
+	bool "2 wait states"
+
+config OR1_SCY_3
+	bool "3 wait states"
+
+config OR1_SCY_4
+	bool "4 wait states"
+
+config OR1_SCY_5
+	bool "5 wait states"
+
+config OR1_SCY_6
+	bool "6 wait states"
+
+config OR1_SCY_7
+	bool "7 wait states"
+
+config OR1_SCY_8
+	depends on BR1_MACHINE_GPCM
+	bool "8 wait states"
+
+config OR1_SCY_9
+	depends on BR1_MACHINE_GPCM
+	bool "9 wait states"
+
+config OR1_SCY_10
+	depends on BR1_MACHINE_GPCM
+	bool "10 wait states"
+
+config OR1_SCY_11
+	depends on BR1_MACHINE_GPCM
+	bool "11 wait states"
+
+config OR1_SCY_12
+	depends on BR1_MACHINE_GPCM
+	bool "12 wait states"
+
+config OR1_SCY_13
+	depends on BR1_MACHINE_GPCM
+	bool "13 wait states"
+
+config OR1_SCY_14
+	depends on BR1_MACHINE_GPCM
+	bool "14 wait states"
+
+config OR1_SCY_15
+	depends on BR1_MACHINE_GPCM
+	bool "15 wait states"
+
+endchoice
+
+endif # BR1_MACHINE_GPCM || BR1_MACHINE_FCM
+
+if BR1_MACHINE_GPCM
+
+choice
+	prompt "Chip select negotiation time"
+
+config OR1_CSNT_NORMAL
+	bool "Normal"
+
+config OR1_CSNT_EARLIER
+	bool "Earlier"
+
+endchoice
+
+choice
+	prompt "Address to chip-select setup"
+
+config OR1_ACS_SAME_TIME
+	bool "At the same time"
+
+config OR1_ACS_HALF_CYCLE_EARLIER
+	bool "Half of a bus clock cycle earlier"
+
+config OR1_ACS_QUARTER_CYCLE_EARLIER
+	bool "Half/Quarter of a bus clock cycle earlier"
+
+endchoice
+
+choice
+	prompt "Extra address to check-select setup"
+
+config OR1_XACS_NORMAL
+	bool "Normal"
+
+config OR1_XACS_EXTENDED
+	bool "Extended"
+
+endchoice
+
+choice
+	prompt "External address termination"
+
+config OR1_SETA_INTERNAL
+	bool "Access is terminated internally"
+
+config OR1_SETA_EXTERNAL
+	bool "Access is terminated externally"
+
+endchoice
+
+endif # BR1_MACHINE_GPCM
+
+if BR1_MACHINE_FCM
+
+choice
+	prompt "NAND Flash EEPROM page size"
+
+config OR1_PGS_SMALL
+	bool "Small page device"
+
+config OR1_PGS_LARGE
+	bool "Large page device"
+
+endchoice
+
+choice
+	prompt "Chip select to command time"
+
+config OR1_CSCT_1_CYCLE
+	depends on OR1_TRLX_NORMAL
+	bool "1 cycle"
+
+config OR1_CSCT_2_CYCLE
+	depends on OR1_TRLX_RELAXED
+	bool "2 cycles"
+
+config OR1_CSCT_4_CYCLE
+	depends on OR1_TRLX_NORMAL
+	bool "4 cycles"
+
+config OR1_CSCT_8_CYCLE
+	depends on OR1_TRLX_RELAXED
+	bool "8 cycles"
+
+endchoice
+
+choice
+	prompt "Command setup time"
+
+config OR1_CST_COINCIDENT
+	depends on OR1_TRLX_NORMAL
+	bool "Coincident with any command"
+
+config OR1_CST_QUARTER_CLOCK
+	depends on OR1_TRLX_NORMAL
+	bool "0.25 clocks after"
+
+config OR1_CST_HALF_CLOCK
+	depends on OR1_TRLX_RELAXED
+	bool "0.5 clocks after"
+
+config OR1_CST_ONE_CLOCK
+	depends on OR1_TRLX_RELAXED
+	bool "1 clock after"
+
+endchoice
+
+choice
+	prompt "Command hold time"
+
+config OR1_CHT_HALF_CLOCK
+	depends on OR1_TRLX_NORMAL
+	bool "0.5 clocks before"
+
+config OR1_CHT_ONE_CLOCK
+	depends on OR1_TRLX_NORMAL
+	bool "1 clock before"
+
+config OR1_CHT_ONE_HALF_CLOCK
+	depends on OR1_TRLX_RELAXED
+	bool "1.5 clocks before"
+
+config OR1_CHT_TWO_CLOCK
+	depends on OR1_TRLX_RELAXED
+	bool "2 clocks before"
+
+endchoice
+
+choice
+	prompt "Reset setup time"
+
+config OR1_RST_THREE_QUARTER_CLOCK
+	depends on OR1_TRLX_NORMAL
+	bool "0.75 clocks prior"
+
+config OR1_RST_ONE_HALF_CLOCK
+	depends on OR1_TRLX_RELAXED
+	bool "0.5 clocks prior"
+
+config OR1_RST_ONE_CLOCK
+	bool "1 clock prior"
+
+endchoice
+
+endif # BR1_MACHINE_FCM
+
+if BR1_MACHINE_UPM
+
+choice
+	prompt "Burst inhibit"
+
+config OR1_BI_BURSTSUPPORT
+	bool "Support burst access"
+
+config OR1_BI_BURSTINHIBIT
+	bool "Inhibit burst access"
+
+endchoice
+
+endif # BR1_MACHINE_UPM
+
+if BR1_MACHINE_SDRAM
+
+choice
+	prompt "Number of column address lines"
+
+config OR1_COLS_7
+	bool "7"
+
+config OR1_COLS_8
+	bool "8"
+
+config OR1_COLS_9
+	bool "9"
+
+config OR1_COLS_10
+	bool "10"
+
+config OR1_COLS_11
+	bool "11"
+
+config OR1_COLS_12
+	bool "12"
+
+config OR1_COLS_13
+	bool "13"
+
+config OR1_COLS_14
+	bool "14"
+
+endchoice
+
+choice
+	prompt "Number of rows address lines"
+
+config OR1_ROWS_9
+	bool "9"
+
+config OR1_ROWS_10
+	bool "10"
+
+config OR1_ROWS_11
+	bool "11"
+
+config OR1_ROWS_12
+	bool "12"
+
+config OR1_ROWS_13
+	bool "13"
+
+config OR1_ROWS_14
+	bool "14"
+
+config OR1_ROWS_15
+	bool "15"
+
+endchoice
+
+choice
+	prompt "Page mode select"
+
+config OR1_PMSEL_BTB
+	bool "Back-to-back"
+
+config OR1_PMSEL_KEPT_OPEN
+	bool "Page kept open until page miss or refresh"
+
+endchoice
+
+endif # BR1_MACHINE_SDRAM
+
+choice
+	prompt "Relaxed timing"
+
+config OR1_TRLX_NORMAL
+	bool "Normal"
+
+config OR1_TRLX_RELAXED
+	bool "Relaxed"
+
+endchoice
+
+choice
+	prompt "Extended hold time"
+
+config OR1_EHTR_NORMAL
+	depends on OR1_TRLX_NORMAL
+	bool "Normal"
+
+config OR1_EHTR_1_CYCLE
+	depends on OR1_TRLX_NORMAL
+	bool "1 idle clock cycle inserted"
+
+config OR1_EHTR_4_CYCLE
+	depends on OR1_TRLX_RELAXED
+	bool "4 idle clock cycles inserted"
+
+config OR1_EHTR_8_CYCLE
+	depends on OR1_TRLX_RELAXED
+	bool "8 idle clock cycles inserted"
+
+endchoice
+
+if !ARCH_MPC8308
+
+choice
+	prompt "External address latch delay"
+
+config OR1_EAD_NONE
+	bool "None"
+
+config OR1_EAD_EXTRA
+	bool "Extra"
+
+endchoice
+
+endif # !ARCH_MPC8308
+
+endif # ELBC_BR1_OR1
+
+config BR1_PORTSIZE
+	hex
+	default 0x800 if BR1_PORTSIZE_8BIT
+	default 0x1000 if BR1_PORTSIZE_16BIT
+	default 0x1800 if BR1_PORTSIZE_32BIT
+
+config BR1_ERRORCHECKING
+	hex
+	default 0x0 if !BR1_MACHINE_FCM
+	default 0x0 if BR1_ERRORCHECKING_DISABLED
+	default 0x200 if BR1_ERRORCHECKING_ECC_CHECKING
+	default 0x400 if BR1_ERRORCHECKING_BOTH
+
+config BR1_WRITE_PROTECT_BIT
+	hex
+	default 0x0 if !BR1_WRITE_PROTECT
+	default 0x100 if BR1_WRITE_PROTECT
+
+config BR1_MACHINE
+	hex
+	default 0x0 if BR1_MACHINE_GPCM
+	default 0x20 if BR1_MACHINE_FCM
+	default 0x60 if BR1_MACHINE_SDRAM
+	default 0x80 if BR1_MACHINE_UPMA
+	default 0xa0 if BR1_MACHINE_UPMB
+	default 0xc0 if BR1_MACHINE_UPMC
+
+config BR1_ATOMIC
+	hex
+	default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360
+	default 0x0 if BR1_ATOMIC_NONE
+	default 0x4 if BR1_ATOMIC_RAWA
+	default 0x8 if BR1_ATOMIC_WARA
+
+config BR1_VALID_BIT
+	hex
+	default 0x0 if !ELBC_BR1_OR1
+	default 0x1 if ELBC_BR1_OR1
+
+config OR1_AM
+	hex
+	default 0xffff8000 if OR1_AM_32_KBYTES && !BR1_MACHINE_SDRAM
+	default 0xffff0000 if OR1_AM_64_KBYTES
+	default 0xfffe0000 if OR1_AM_128_KBYTES
+	default 0xfffc0000 if OR1_AM_256_KBYTES
+	default 0xfff80000 if OR1_AM_512_KBYTES
+	default 0xfff00000 if OR1_AM_1_MBYTES
+	default 0xffe00000 if OR1_AM_2_MBYTES
+	default 0xffc00000 if OR1_AM_4_MBYTES
+	default 0xff800000 if OR1_AM_8_MBYTES
+	default 0xff000000 if OR1_AM_16_MBYTES
+	default 0xfe000000 if OR1_AM_32_MBYTES
+	default 0xfc000000 if OR1_AM_64_MBYTES
+	default 0xf8000000 if OR1_AM_128_MBYTES
+	default 0xf0000000 if OR1_AM_256_MBYTES
+	default 0xe0000000 if OR1_AM_512_MBYTES
+	default 0xc0000000 if OR1_AM_1_GBYTES
+	default 0x80000000 if OR1_AM_2_GBYTES
+	default 0x00000000 if OR1_AM_4_GBYTES
+
+config OR1_XAM
+	hex
+	default 0x0 if !OR1_XAM_SET
+	default 0x6000 if OR1_XAM_SET
+
+config OR1_BCTLD
+	hex
+	default 0x0 if OR1_BCTLD_ASSERTED
+	default 0x1000 if OR1_BCTLD_NOT_ASSERTED
+
+config OR1_BI
+	hex
+	default 0x0 if !BR1_MACHINE_UPM
+	default 0x0 if OR1_BI_BURSTSUPPORT
+	default 0x100 if OR1_BI_BURSTINHIBIT
+
+config OR1_COLS
+	hex
+	default 0x0 if !BR1_MACHINE_SDRAM
+	default 0x0 if OR1_COLS_7
+	default 0x400 if OR1_COLS_8
+	default 0x800 if OR1_COLS_9
+	default 0xc00 if OR1_COLS_10
+	default 0x1000 if OR1_COLS_11
+	default 0x1400 if OR1_COLS_12
+	default 0x1800 if OR1_COLS_13
+	default 0x1c00 if OR1_COLS_14
+
+config OR1_ROWS
+	hex
+	default 0x0 if !BR1_MACHINE_SDRAM
+	default 0x0 if OR1_ROWS_9
+	default 0x40 if OR1_ROWS_10
+	default 0x80 if OR1_ROWS_11
+	default 0xc0 if OR1_ROWS_12
+	default 0x100 if OR1_ROWS_13
+	default 0x140 if OR1_ROWS_14
+	default 0x180 if OR1_ROWS_15
+
+config OR1_PMSEL
+	hex
+	default 0x0 if !BR1_MACHINE_SDRAM
+	default 0x0 if OR1_PMSEL_BTB
+	default 0x20 if OR1_PMSEL_KEPT_OPEN
+
+config OR1_SCY
+	hex
+	default 0x0 if !BR1_MACHINE_GPCM && !BR1_MACHINE_FCM
+	default 0x0 if OR1_SCY_0
+	default 0x10 if OR1_SCY_1
+	default 0x20 if OR1_SCY_2
+	default 0x30 if OR1_SCY_3
+	default 0x40 if OR1_SCY_4
+	default 0x50 if OR1_SCY_5
+	default 0x60 if OR1_SCY_6
+	default 0x70 if OR1_SCY_7
+	default 0x80 if OR1_SCY_8
+	default 0x90 if OR1_SCY_9
+	default 0xa0 if OR1_SCY_10
+	default 0xb0 if OR1_SCY_11
+	default 0xc0 if OR1_SCY_12
+	default 0xd0 if OR1_SCY_13
+	default 0xe0 if OR1_SCY_14
+	default 0xf0 if OR1_SCY_15
+
+config OR1_PGS
+	hex
+	default 0x0 if !BR1_MACHINE_FCM
+	default 0x0 if OR1_PGS_SMALL
+	default 0x400 if OR1_PGS_LARGE
+
+config OR1_CSCT
+	hex
+	default 0x0 if !BR1_MACHINE_FCM
+	default 0x0 if OR1_CSCT_1_CYCLE
+	default 0x0 if OR1_CSCT_2_CYCLE
+	default 0x200 if OR1_CSCT_4_CYCLE
+	default 0x200 if OR1_CSCT_8_CYCLE
+
+config OR1_CST
+	hex
+	default 0x0 if !BR1_MACHINE_FCM
+	default 0x0 if OR1_CST_COINCIDENT
+	default 0x100 if OR1_CST_QUARTER_CLOCK
+	default 0x0 if OR1_CST_HALF_CLOCK
+	default 0x100 if OR1_CST_ONE_CLOCK
+
+config OR1_CHT
+	hex
+	default 0x0 if !BR1_MACHINE_FCM
+	default 0x0 if OR1_CHT_HALF_CLOCK
+	default 0x80 if OR1_CHT_ONE_CLOCK
+	default 0x0 if OR1_CHT_ONE_HALF_CLOCK
+	default 0x80 if OR1_CHT_TWO_CLOCK
+
+config OR1_RST
+	hex
+	default 0x0 if !BR1_MACHINE_FCM
+	default 0x0 if OR1_RST_THREE_QUARTER_CLOCK
+	default 0x8 if OR1_RST_ONE_CLOCK
+	default 0x0 if OR1_RST_ONE_HALF_CLOCK
+
+config OR1_CSNT
+	hex
+	default 0x0 if !BR1_MACHINE_GPCM
+	default 0x0 if OR1_CSNT_NORMAL
+	default 0x800 if OR1_CSNT_EARLIER
+
+config OR1_ACS
+	hex
+	default 0x0 if !BR1_MACHINE_GPCM
+	default 0x0 if OR1_ACS_SAME_TIME
+	default 0x400 if OR1_ACS_QUARTER_CYCLE_EARLIER
+	default 0x600 if OR1_ACS_HALF_CYCLE_EARLIER
+
+config OR1_XACS
+	hex
+	default 0x0 if !BR1_MACHINE_GPCM
+	default 0x0 if OR1_XACS_NORMAL
+	default 0x100 if OR1_XACS_EXTENDED
+
+config OR1_SETA
+	hex
+	default 0x0 if !BR1_MACHINE_GPCM
+	default 0x0 if OR1_SETA_INTERNAL
+	default 0x8 if OR1_SETA_EXTERNAL
+
+config OR1_TRLX
+	hex
+	default 0x0 if OR1_TRLX_NORMAL
+	default 0x4 if OR1_TRLX_RELAXED
+
+config OR1_EHTR
+	hex
+	default 0x0 if OR1_EHTR_NORMAL
+	default 0x2 if OR1_EHTR_1_CYCLE
+	default 0x0 if OR1_EHTR_4_CYCLE
+	default 0x2 if OR1_EHTR_8_CYCLE
+
+config OR1_EAD
+	hex
+	default 0x0 if ARCH_MPC8308
+	default 0x0 if OR1_EAD_NONE
+	default 0x1 if OR1_EAD_EXTRA

arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc2

@@ -0,0 +1,733 @@
+menuconfig ELBC_BR2_OR2
+	bool "ELBC BR2/OR2"
+
+if ELBC_BR2_OR2
+
+config BR2_OR2_NAME
+	string "Identifier"
+
+config BR2_OR2_BASE
+	hex "Port base"
+
+choice
+	prompt "Port size"
+
+config BR2_PORTSIZE_8BIT
+	bool "8-bit"
+
+config BR2_PORTSIZE_16BIT
+	depends on !BR2_MACHINE_FCM
+	bool "16-bit"
+
+
+config BR2_PORTSIZE_32BIT
+	depends on !BR2_MACHINE_FCM
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	bool "32-bit"
+
+endchoice
+
+if BR2_MACHINE_FCM
+
+choice
+	prompt "Data Error Checking"
+
+config BR2_ERRORCHECKING_DISABLED
+	bool "Disabled"
+
+config BR2_ERRORCHECKING_ECC_CHECKING
+	bool "ECC checking / No ECC generation"
+
+config BR2_ERRORCHECKING_BOTH
+	bool "ECC checking and generation"
+
+endchoice
+
+endif
+
+config BR2_WRITE_PROTECT
+	bool "Write-protect"
+
+config BR2_MACHINE_UPM
+	bool
+
+choice
+	prompt "Machine select"
+
+config BR2_MACHINE_GPCM
+	bool "GPCM"
+
+config BR2_MACHINE_FCM
+	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	bool "FCM"
+
+config BR2_MACHINE_SDRAM
+	depends on ARCH_MPC8349 || ARCH_MPC8360
+	bool "SDRAM"
+
+config BR2_MACHINE_UPMA
+	select BR2_MACHINE_UPM
+	bool "UPM (A)"
+
+config BR2_MACHINE_UPMB
+	select BR2_MACHINE_UPM
+	bool "UPM (B)"
+
+config BR2_MACHINE_UPMC
+	select BR2_MACHINE_UPM
+	bool "UPM (C)"
+
+endchoice
+
+if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360
+
+choice
+	prompt "Atomic operations"
+
+config BR2_ATOMIC_NONE
+	bool "No atomic operations"
+
+config BR2_ATOMIC_RAWA
+	bool "Read-after-write-atomic"
+
+config BR2_ATOMIC_WARA
+	bool "Write-after-read-atomic"
+
+endchoice
+
+endif
+
+if BR2_MACHINE_GPCM || BR2_MACHINE_FCM || BR2_MACHINE_UPM || BR2_MACHINE_SDRAM
+
+choice
+	prompt "Address mask"
+
+config OR2_AM_32_KBYTES
+	depends on !BR2_MACHINE_SDRAM
+	bool "32 kb"
+
+config OR2_AM_64_KBYTES
+	bool "64 kb"
+
+config OR2_AM_128_KBYTES
+	bool "128 kb"
+
+config OR2_AM_256_KBYTES
+	bool "256 kb"
+
+config OR2_AM_512_KBYTES
+	bool "512 kb"
+
+config OR2_AM_1_MBYTES
+	bool "1 mb"
+
+config OR2_AM_2_MBYTES
+	bool "2 mb"
+
+config OR2_AM_4_MBYTES
+	bool "4 mb"
+
+config OR2_AM_8_MBYTES
+	bool "8 mb"
+
+config OR2_AM_16_MBYTES
+	bool "16 mb"
+
+config OR2_AM_32_MBYTES
+	bool "32 mb"
+
+config OR2_AM_64_MBYTES
+	bool "64 mb"
+
+# XXX: Some boards define 128MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR2_AM_128_MBYTES
+	bool "128 mb"
+
+# XXX: Some boards define 256MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR2_AM_256_MBYTES
+	bool "256 mb"
+
+config OR2_AM_512_MBYTES
+	depends on BR2_MACHINE_FCM
+	bool "512 mb"
+
+# XXX: Some boards define 1GB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR2_AM_1_GBYTES
+	bool "1 gb"
+
+config OR2_AM_2_GBYTES
+	depends on BR2_MACHINE_FCM
+	bool "2 gb"
+
+config OR2_AM_4_GBYTES
+	depends on BR2_MACHINE_FCM
+	bool "4 gb"
+
+endchoice
+
+config OR2_XAM_SET
+	bool "Set unused bytes after address mask"
+choice
+	prompt "Buffer control disable"
+
+config OR2_BCTLD_ASSERTED
+	bool "Asserted"
+
+config OR2_BCTLD_NOT_ASSERTED
+	bool "Not asserted"
+
+endchoice
+
+endif
+
+if BR2_MACHINE_GPCM || BR2_MACHINE_FCM
+
+choice
+	prompt "Cycle length in bus clocks"
+
+config OR2_SCY_0
+	bool "No wait states"
+
+config OR2_SCY_1
+	bool "1 wait state"
+
+config OR2_SCY_2
+	bool "2 wait states"
+
+config OR2_SCY_3
+	bool "3 wait states"
+
+config OR2_SCY_4
+	bool "4 wait states"
+
+config OR2_SCY_5
+	bool "5 wait states"
+
+config OR2_SCY_6
+	bool "6 wait states"
+
+config OR2_SCY_7
+	bool "7 wait states"
+
+config OR2_SCY_8
+	depends on BR2_MACHINE_GPCM
+	bool "8 wait states"
+
+config OR2_SCY_9
+	depends on BR2_MACHINE_GPCM
+	bool "9 wait states"
+
+config OR2_SCY_10
+	depends on BR2_MACHINE_GPCM
+	bool "10 wait states"
+
+config OR2_SCY_11
+	depends on BR2_MACHINE_GPCM
+	bool "11 wait states"
+
+config OR2_SCY_12
+	depends on BR2_MACHINE_GPCM
+	bool "12 wait states"
+
+config OR2_SCY_13
+	depends on BR2_MACHINE_GPCM
+	bool "13 wait states"
+
+config OR2_SCY_14
+	depends on BR2_MACHINE_GPCM
+	bool "14 wait states"
+
+config OR2_SCY_15
+	depends on BR2_MACHINE_GPCM
+	bool "15 wait states"
+
+endchoice
+
+endif # BR2_MACHINE_GPCM || BR2_MACHINE_FCM
+
+if BR2_MACHINE_GPCM
+
+choice
+	prompt "Chip select negotiation time"
+
+config OR2_CSNT_NORMAL
+	bool "Normal"
+
+config OR2_CSNT_EARLIER
+	bool "Earlier"
+
+endchoice
+
+choice
+	prompt "Address to chip-select setup"
+
+config OR2_ACS_SAME_TIME
+	bool "At the same time"
+
+config OR2_ACS_HALF_CYCLE_EARLIER
+	bool "Half of a bus clock cycle earlier"
+
+config OR2_ACS_QUARTER_CYCLE_EARLIER
+	bool "Half/Quarter of a bus clock cycle earlier"
+
+endchoice
+
+choice
+	prompt "Extra address to check-select setup"
+
+config OR2_XACS_NORMAL
+	bool "Normal"
+
+config OR2_XACS_EXTENDED
+	bool "Extended"
+
+endchoice
+
+choice
+	prompt "External address termination"
+
+config OR2_SETA_INTERNAL
+	bool "Access is terminated internally"
+
+config OR2_SETA_EXTERNAL
+	bool "Access is terminated externally"
+
+endchoice
+
+endif # BR2_MACHINE_GPCM
+
+if BR2_MACHINE_FCM
+
+choice
+	prompt "NAND Flash EEPROM page size"
+
+config OR2_PGS_SMALL
+	bool "Small page device"
+
+config OR2_PGS_LARGE
+	bool "Large page device"
+
+endchoice
+
+choice
+	prompt "Chip select to command time"
+
+config OR2_CSCT_1_CYCLE
+	depends on OR2_TRLX_NORMAL
+	bool "1 cycle"
+
+config OR2_CSCT_2_CYCLE
+	depends on OR2_TRLX_RELAXED
+	bool "2 cycles"
+
+config OR2_CSCT_4_CYCLE
+	depends on OR2_TRLX_NORMAL
+	bool "4 cycles"
+
+config OR2_CSCT_8_CYCLE
+	depends on OR2_TRLX_RELAXED
+	bool "8 cycles"
+
+endchoice
+
+choice
+	prompt "Command setup time"
+
+config OR2_CST_COINCIDENT
+	depends on OR2_TRLX_NORMAL
+	bool "Coincident with any command"
+
+config OR2_CST_QUARTER_CLOCK
+	depends on OR2_TRLX_NORMAL
+	bool "0.25 clocks after"
+
+config OR2_CST_HALF_CLOCK
+	depends on OR2_TRLX_RELAXED
+	bool "0.5 clocks after"
+
+config OR2_CST_ONE_CLOCK
+	depends on OR2_TRLX_RELAXED
+	bool "1 clock after"
+
+endchoice
+
+choice
+	prompt "Command hold time"
+
+config OR2_CHT_HALF_CLOCK
+	depends on OR2_TRLX_NORMAL
+	bool "0.5 clocks before"
+
+config OR2_CHT_ONE_CLOCK
+	depends on OR2_TRLX_NORMAL
+	bool "1 clock before"
+
+config OR2_CHT_ONE_HALF_CLOCK
+	depends on OR2_TRLX_RELAXED
+	bool "1.5 clocks before"
+
+config OR2_CHT_TWO_CLOCK
+	depends on OR2_TRLX_RELAXED
+	bool "2 clocks before"
+
+endchoice
+
+choice
+	prompt "Reset setup time"
+
+config OR2_RST_THREE_QUARTER_CLOCK
+	depends on OR2_TRLX_NORMAL
+	bool "0.75 clocks prior"
+
+config OR2_RST_ONE_HALF_CLOCK
+	depends on OR2_TRLX_RELAXED
+	bool "0.5 clocks prior"
+
+config OR2_RST_ONE_CLOCK
+	bool "1 clock prior"
+
+endchoice
+
+endif # BR2_MACHINE_FCM
+
+if BR2_MACHINE_UPM
+
+choice
+	prompt "Burst inhibit"
+
+config OR2_BI_BURSTSUPPORT
+	bool "Support burst access"
+
+config OR2_BI_BURSTINHIBIT
+	bool "Inhibit burst access"
+
+endchoice
+
+endif # BR2_MACHINE_UPM
+
+if BR2_MACHINE_SDRAM
+
+choice
+	prompt "Number of column address lines"
+
+config OR2_COLS_7
+	bool "7"
+
+config OR2_COLS_8
+	bool "8"
+
+config OR2_COLS_9
+	bool "9"
+
+config OR2_COLS_10
+	bool "10"
+
+config OR2_COLS_11
+	bool "11"
+
+config OR2_COLS_12
+	bool "12"
+
+config OR2_COLS_13
+	bool "13"
+
+config OR2_COLS_14
+	bool "14"
+
+endchoice
+
+choice
+	prompt "Number of rows address lines"
+
+config OR2_ROWS_9
+	bool "9"
+
+config OR2_ROWS_10
+	bool "10"
+
+config OR2_ROWS_11
+	bool "11"
+
+config OR2_ROWS_12
+	bool "12"
+
+config OR2_ROWS_13
+	bool "13"
+
+config OR2_ROWS_14
+	bool "14"
+
+config OR2_ROWS_15
+	bool "15"
+
+endchoice
+
+choice
+	prompt "Page mode select"
+
+config OR2_PMSEL_BTB
+	bool "Back-to-back"
+
+config OR2_PMSEL_KEPT_OPEN
+	bool "Page kept open until page miss or refresh"
+
+endchoice
+
+endif # BR2_MACHINE_SDRAM
+
+choice
+	prompt "Relaxed timing"
+
+config OR2_TRLX_NORMAL
+	bool "Normal"
+
+config OR2_TRLX_RELAXED
+	bool "Relaxed"
+
+endchoice
+
+choice
+	prompt "Extended hold time"
+
+config OR2_EHTR_NORMAL
+	depends on OR2_TRLX_NORMAL
+	bool "Normal"
+
+config OR2_EHTR_1_CYCLE
+	depends on OR2_TRLX_NORMAL
+	bool "1 idle clock cycle inserted"
+
+config OR2_EHTR_4_CYCLE
+	depends on OR2_TRLX_RELAXED
+	bool "4 idle clock cycles inserted"
+
+config OR2_EHTR_8_CYCLE
+	depends on OR2_TRLX_RELAXED
+	bool "8 idle clock cycles inserted"
+
+endchoice
+
+if !ARCH_MPC8308
+
+choice
+	prompt "External address latch delay"
+
+config OR2_EAD_NONE
+	bool "None"
+
+config OR2_EAD_EXTRA
+	bool "Extra"
+
+endchoice
+
+endif # !ARCH_MPC8308
+
+endif # ELBC_BR2_OR2
+
+config BR2_PORTSIZE
+	hex
+	default 0x800 if BR2_PORTSIZE_8BIT
+	default 0x1000 if BR2_PORTSIZE_16BIT
+	default 0x1800 if BR2_PORTSIZE_32BIT
+
+config BR2_ERRORCHECKING
+	hex
+	default 0x0 if !BR2_MACHINE_FCM
+	default 0x0 if BR2_ERRORCHECKING_DISABLED
+	default 0x200 if BR2_ERRORCHECKING_ECC_CHECKING
+	default 0x400 if BR2_ERRORCHECKING_BOTH
+
+config BR2_WRITE_PROTECT_BIT
+	hex
+	default 0x0 if !BR2_WRITE_PROTECT
+	default 0x100 if BR2_WRITE_PROTECT
+
+config BR2_MACHINE
+	hex
+	default 0x0 if BR2_MACHINE_GPCM
+	default 0x20 if BR2_MACHINE_FCM
+	default 0x60 if BR2_MACHINE_SDRAM
+	default 0x80 if BR2_MACHINE_UPMA
+	default 0xa0 if BR2_MACHINE_UPMB
+	default 0xc0 if BR2_MACHINE_UPMC
+
+config BR2_ATOMIC
+	hex
+	default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360
+	default 0x0 if BR2_ATOMIC_NONE
+	default 0x4 if BR2_ATOMIC_RAWA
+	default 0x8 if BR2_ATOMIC_WARA
+
+config BR2_VALID_BIT
+	hex
+	default 0x0 if !ELBC_BR2_OR2
+	default 0x1 if ELBC_BR2_OR2
+
+config OR2_AM
+	hex
+	default 0xffff8000 if OR2_AM_32_KBYTES && !BR2_MACHINE_SDRAM
+	default 0xffff0000 if OR2_AM_64_KBYTES
+	default 0xfffe0000 if OR2_AM_128_KBYTES
+	default 0xfffc0000 if OR2_AM_256_KBYTES
+	default 0xfff80000 if OR2_AM_512_KBYTES
+	default 0xfff00000 if OR2_AM_1_MBYTES
+	default 0xffe00000 if OR2_AM_2_MBYTES
+	default 0xffc00000 if OR2_AM_4_MBYTES
+	default 0xff800000 if OR2_AM_8_MBYTES
+	default 0xff000000 if OR2_AM_16_MBYTES
+	default 0xfe000000 if OR2_AM_32_MBYTES
+	default 0xfc000000 if OR2_AM_64_MBYTES
+	default 0xf8000000 if OR2_AM_128_MBYTES
+	default 0xf0000000 if OR2_AM_256_MBYTES
+	default 0xe0000000 if OR2_AM_512_MBYTES
+	default 0xc0000000 if OR2_AM_1_GBYTES
+	default 0x80000000 if OR2_AM_2_GBYTES
+	default 0x00000000 if OR2_AM_4_GBYTES
+
+config OR2_XAM
+	hex
+	default 0x0 if !OR2_XAM_SET
+	default 0x6000 if OR2_XAM_SET
+
+config OR2_BCTLD
+	hex
+	default 0x0 if OR2_BCTLD_ASSERTED
+	default 0x1000 if OR2_BCTLD_NOT_ASSERTED
+
+config OR2_BI
+	hex
+	default 0x0 if !BR2_MACHINE_UPM
+	default 0x0 if OR2_BI_BURSTSUPPORT
+	default 0x100 if OR2_BI_BURSTINHIBIT
+
+config OR2_COLS
+	hex
+	default 0x0 if !BR2_MACHINE_SDRAM
+	default 0x0 if OR2_COLS_7
+	default 0x400 if OR2_COLS_8
+	default 0x800 if OR2_COLS_9
+	default 0xc00 if OR2_COLS_10
+	default 0x1000 if OR2_COLS_11
+	default 0x1400 if OR2_COLS_12
+	default 0x1800 if OR2_COLS_13
+	default 0x1c00 if OR2_COLS_14
+
+config OR2_ROWS
+	hex
+	default 0x0 if !BR2_MACHINE_SDRAM
+	default 0x0 if OR2_ROWS_9
+	default 0x40 if OR2_ROWS_10
+	default 0x80 if OR2_ROWS_11
+	default 0xc0 if OR2_ROWS_12
+	default 0x100 if OR2_ROWS_13
+	default 0x140 if OR2_ROWS_14
+	default 0x180 if OR2_ROWS_15
+
+config OR2_PMSEL
+	hex
+	default 0x0 if !BR2_MACHINE_SDRAM
+	default 0x0 if OR2_PMSEL_BTB
+	default 0x20 if OR2_PMSEL_KEPT_OPEN
+
+config OR2_SCY
+	hex
+	default 0x0 if !BR2_MACHINE_GPCM && !BR2_MACHINE_FCM
+	default 0x0 if OR2_SCY_0
+	default 0x10 if OR2_SCY_1
+	default 0x20 if OR2_SCY_2
+	default 0x30 if OR2_SCY_3
+	default 0x40 if OR2_SCY_4
+	default 0x50 if OR2_SCY_5
+	default 0x60 if OR2_SCY_6
+	default 0x70 if OR2_SCY_7
+	default 0x80 if OR2_SCY_8
+	default 0x90 if OR2_SCY_9
+	default 0xa0 if OR2_SCY_10
+	default 0xb0 if OR2_SCY_11
+	default 0xc0 if OR2_SCY_12
+	default 0xd0 if OR2_SCY_13
+	default 0xe0 if OR2_SCY_14
+	default 0xf0 if OR2_SCY_15
+
+config OR2_PGS
+	hex
+	default 0x0 if !BR2_MACHINE_FCM
+	default 0x0 if OR2_PGS_SMALL
+	default 0x400 if OR2_PGS_LARGE
+
+config OR2_CSCT
+	hex
+	default 0x0 if !BR2_MACHINE_FCM
+	default 0x0 if OR2_CSCT_1_CYCLE
+	default 0x0 if OR2_CSCT_2_CYCLE
+	default 0x200 if OR2_CSCT_4_CYCLE
+	default 0x200 if OR2_CSCT_8_CYCLE
+
+config OR2_CST
+	hex
+	default 0x0 if !BR2_MACHINE_FCM
+	default 0x0 if OR2_CST_COINCIDENT
+	default 0x100 if OR2_CST_QUARTER_CLOCK
+	default 0x0 if OR2_CST_HALF_CLOCK
+	default 0x100 if OR2_CST_ONE_CLOCK
+
+config OR2_CHT
+	hex
+	default 0x0 if !BR2_MACHINE_FCM
+	default 0x0 if OR2_CHT_HALF_CLOCK
+	default 0x80 if OR2_CHT_ONE_CLOCK
+	default 0x0 if OR2_CHT_ONE_HALF_CLOCK
+	default 0x80 if OR2_CHT_TWO_CLOCK
+
+config OR2_RST
+	hex
+	default 0x0 if !BR2_MACHINE_FCM
+	default 0x0 if OR2_RST_THREE_QUARTER_CLOCK
+	default 0x8 if OR2_RST_ONE_CLOCK
+	default 0x0 if OR2_RST_ONE_HALF_CLOCK
+
+config OR2_CSNT
+	hex
+	default 0x0 if !BR2_MACHINE_GPCM
+	default 0x0 if OR2_CSNT_NORMAL
+	default 0x800 if OR2_CSNT_EARLIER
+
+config OR2_ACS
+	hex
+	default 0x0 if !BR2_MACHINE_GPCM
+	default 0x0 if OR2_ACS_SAME_TIME
+	default 0x400 if OR2_ACS_QUARTER_CYCLE_EARLIER
+	default 0x600 if OR2_ACS_HALF_CYCLE_EARLIER
+
+config OR2_XACS
+	hex
+	default 0x0 if !BR2_MACHINE_GPCM
+	default 0x0 if OR2_XACS_NORMAL
+	default 0x100 if OR2_XACS_EXTENDED
+
+config OR2_SETA
+	hex
+	default 0x0 if !BR2_MACHINE_GPCM
+	default 0x0 if OR2_SETA_INTERNAL
+	default 0x8 if OR2_SETA_EXTERNAL
+
+config OR2_TRLX
+	hex
+	default 0x0 if OR2_TRLX_NORMAL
+	default 0x4 if OR2_TRLX_RELAXED
+
+config OR2_EHTR
+	hex
+	default 0x0 if OR2_EHTR_NORMAL
+	default 0x2 if OR2_EHTR_1_CYCLE
+	default 0x0 if OR2_EHTR_4_CYCLE
+	default 0x2 if OR2_EHTR_8_CYCLE
+
+config OR2_EAD
+	hex
+	default 0x0 if ARCH_MPC8308
+	default 0x0 if OR2_EAD_NONE
+	default 0x1 if OR2_EAD_EXTRA

arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc3

@@ -0,0 +1,733 @@
+menuconfig ELBC_BR3_OR3
+	bool "ELBC BR3/OR3"
+
+if ELBC_BR3_OR3
+
+config BR3_OR3_NAME
+	string "Identifier"
+
+config BR3_OR3_BASE
+	hex "Port base"
+
+choice
+	prompt "Port size"
+
+config BR3_PORTSIZE_8BIT
+	bool "8-bit"
+
+config BR3_PORTSIZE_16BIT
+	depends on !BR3_MACHINE_FCM
+	bool "16-bit"
+
+
+config BR3_PORTSIZE_32BIT
+	depends on !BR3_MACHINE_FCM
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	bool "32-bit"
+
+endchoice
+
+if BR3_MACHINE_FCM
+
+choice
+	prompt "Data Error Checking"
+
+config BR3_ERRORCHECKING_DISABLED
+	bool "Disabled"
+
+config BR3_ERRORCHECKING_ECC_CHECKING
+	bool "ECC checking / No ECC generation"
+
+config BR3_ERRORCHECKING_BOTH
+	bool "ECC checking and generation"
+
+endchoice
+
+endif
+
+config BR3_WRITE_PROTECT
+	bool "Write-protect"
+
+config BR3_MACHINE_UPM
+	bool
+
+choice
+	prompt "Machine select"
+
+config BR3_MACHINE_GPCM
+	bool "GPCM"
+
+config BR3_MACHINE_FCM
+	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	bool "FCM"
+
+config BR3_MACHINE_SDRAM
+	depends on ARCH_MPC8349 || ARCH_MPC8360
+	bool "SDRAM"
+
+config BR3_MACHINE_UPMA
+	select BR3_MACHINE_UPM
+	bool "UPM (A)"
+
+config BR3_MACHINE_UPMB
+	select BR3_MACHINE_UPM
+	bool "UPM (B)"
+
+config BR3_MACHINE_UPMC
+	select BR3_MACHINE_UPM
+	bool "UPM (C)"
+
+endchoice
+
+if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360
+
+choice
+	prompt "Atomic operations"
+
+config BR3_ATOMIC_NONE
+	bool "No atomic operations"
+
+config BR3_ATOMIC_RAWA
+	bool "Read-after-write-atomic"
+
+config BR3_ATOMIC_WARA
+	bool "Write-after-read-atomic"
+
+endchoice
+
+endif
+
+if BR3_MACHINE_GPCM || BR3_MACHINE_FCM || BR3_MACHINE_UPM || BR3_MACHINE_SDRAM
+
+choice
+	prompt "Address mask"
+
+config OR3_AM_32_KBYTES
+	depends on !BR3_MACHINE_SDRAM
+	bool "32 kb"
+
+config OR3_AM_64_KBYTES
+	bool "64 kb"
+
+config OR3_AM_128_KBYTES
+	bool "128 kb"
+
+config OR3_AM_256_KBYTES
+	bool "256 kb"
+
+config OR3_AM_512_KBYTES
+	bool "512 kb"
+
+config OR3_AM_1_MBYTES
+	bool "1 mb"
+
+config OR3_AM_2_MBYTES
+	bool "2 mb"
+
+config OR3_AM_4_MBYTES
+	bool "4 mb"
+
+config OR3_AM_8_MBYTES
+	bool "8 mb"
+
+config OR3_AM_16_MBYTES
+	bool "16 mb"
+
+config OR3_AM_32_MBYTES
+	bool "32 mb"
+
+config OR3_AM_64_MBYTES
+	bool "64 mb"
+
+# XXX: Some boards define 128MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR3_AM_128_MBYTES
+	bool "128 mb"
+
+# XXX: Some boards define 256MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR3_AM_256_MBYTES
+	bool "256 mb"
+
+config OR3_AM_512_MBYTES
+	depends on BR3_MACHINE_FCM
+	bool "512 mb"
+
+# XXX: Some boards define 1GB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR3_AM_1_GBYTES
+	bool "1 gb"
+
+config OR3_AM_2_GBYTES
+	depends on BR3_MACHINE_FCM
+	bool "2 gb"
+
+config OR3_AM_4_GBYTES
+	depends on BR3_MACHINE_FCM
+	bool "4 gb"
+
+endchoice
+
+config OR3_XAM_SET
+	bool "Set unused bytes after address mask"
+choice
+	prompt "Buffer control disable"
+
+config OR3_BCTLD_ASSERTED
+	bool "Asserted"
+
+config OR3_BCTLD_NOT_ASSERTED
+	bool "Not asserted"
+
+endchoice
+
+endif
+
+if BR3_MACHINE_GPCM || BR3_MACHINE_FCM
+
+choice
+	prompt "Cycle length in bus clocks"
+
+config OR3_SCY_0
+	bool "No wait states"
+
+config OR3_SCY_1
+	bool "1 wait state"
+
+config OR3_SCY_2
+	bool "2 wait states"
+
+config OR3_SCY_3
+	bool "3 wait states"
+
+config OR3_SCY_4
+	bool "4 wait states"
+
+config OR3_SCY_5
+	bool "5 wait states"
+
+config OR3_SCY_6
+	bool "6 wait states"
+
+config OR3_SCY_7
+	bool "7 wait states"
+
+config OR3_SCY_8
+	depends on BR3_MACHINE_GPCM
+	bool "8 wait states"
+
+config OR3_SCY_9
+	depends on BR3_MACHINE_GPCM
+	bool "9 wait states"
+
+config OR3_SCY_10
+	depends on BR3_MACHINE_GPCM
+	bool "10 wait states"
+
+config OR3_SCY_11
+	depends on BR3_MACHINE_GPCM
+	bool "11 wait states"
+
+config OR3_SCY_12
+	depends on BR3_MACHINE_GPCM
+	bool "12 wait states"
+
+config OR3_SCY_13
+	depends on BR3_MACHINE_GPCM
+	bool "13 wait states"
+
+config OR3_SCY_14
+	depends on BR3_MACHINE_GPCM
+	bool "14 wait states"
+
+config OR3_SCY_15
+	depends on BR3_MACHINE_GPCM
+	bool "15 wait states"
+
+endchoice
+
+endif # BR3_MACHINE_GPCM || BR3_MACHINE_FCM
+
+if BR3_MACHINE_GPCM
+
+choice
+	prompt "Chip select negotiation time"
+
+config OR3_CSNT_NORMAL
+	bool "Normal"
+
+config OR3_CSNT_EARLIER
+	bool "Earlier"
+
+endchoice
+
+choice
+	prompt "Address to chip-select setup"
+
+config OR3_ACS_SAME_TIME
+	bool "At the same time"
+
+config OR3_ACS_HALF_CYCLE_EARLIER
+	bool "Half of a bus clock cycle earlier"
+
+config OR3_ACS_QUARTER_CYCLE_EARLIER
+	bool "Half/Quarter of a bus clock cycle earlier"
+
+endchoice
+
+choice
+	prompt "Extra address to check-select setup"
+
+config OR3_XACS_NORMAL
+	bool "Normal"
+
+config OR3_XACS_EXTENDED
+	bool "Extended"
+
+endchoice
+
+choice
+	prompt "External address termination"
+
+config OR3_SETA_INTERNAL
+	bool "Access is terminated internally"
+
+config OR3_SETA_EXTERNAL
+	bool "Access is terminated externally"
+
+endchoice
+
+endif # BR3_MACHINE_GPCM
+
+if BR3_MACHINE_FCM
+
+choice
+	prompt "NAND Flash EEPROM page size"
+
+config OR3_PGS_SMALL
+	bool "Small page device"
+
+config OR3_PGS_LARGE
+	bool "Large page device"
+
+endchoice
+
+choice
+	prompt "Chip select to command time"
+
+config OR3_CSCT_1_CYCLE
+	depends on OR3_TRLX_NORMAL
+	bool "1 cycle"
+
+config OR3_CSCT_2_CYCLE
+	depends on OR3_TRLX_RELAXED
+	bool "2 cycles"
+
+config OR3_CSCT_4_CYCLE
+	depends on OR3_TRLX_NORMAL
+	bool "4 cycles"
+
+config OR3_CSCT_8_CYCLE
+	depends on OR3_TRLX_RELAXED
+	bool "8 cycles"
+
+endchoice
+
+choice
+	prompt "Command setup time"
+
+config OR3_CST_COINCIDENT
+	depends on OR3_TRLX_NORMAL
+	bool "Coincident with any command"
+
+config OR3_CST_QUARTER_CLOCK
+	depends on OR3_TRLX_NORMAL
+	bool "0.25 clocks after"
+
+config OR3_CST_HALF_CLOCK
+	depends on OR3_TRLX_RELAXED
+	bool "0.5 clocks after"
+
+config OR3_CST_ONE_CLOCK
+	depends on OR3_TRLX_RELAXED
+	bool "1 clock after"
+
+endchoice
+
+choice
+	prompt "Command hold time"
+
+config OR3_CHT_HALF_CLOCK
+	depends on OR3_TRLX_NORMAL
+	bool "0.5 clocks before"
+
+config OR3_CHT_ONE_CLOCK
+	depends on OR3_TRLX_NORMAL
+	bool "1 clock before"
+
+config OR3_CHT_ONE_HALF_CLOCK
+	depends on OR3_TRLX_RELAXED
+	bool "1.5 clocks before"
+
+config OR3_CHT_TWO_CLOCK
+	depends on OR3_TRLX_RELAXED
+	bool "2 clocks before"
+
+endchoice
+
+choice
+	prompt "Reset setup time"
+
+config OR3_RST_THREE_QUARTER_CLOCK
+	depends on OR3_TRLX_NORMAL
+	bool "0.75 clocks prior"
+
+config OR3_RST_ONE_HALF_CLOCK
+	depends on OR3_TRLX_RELAXED
+	bool "0.5 clocks prior"
+
+config OR3_RST_ONE_CLOCK
+	bool "1 clock prior"
+
+endchoice
+
+endif # BR3_MACHINE_FCM
+
+if BR3_MACHINE_UPM
+
+choice
+	prompt "Burst inhibit"
+
+config OR3_BI_BURSTSUPPORT
+	bool "Support burst access"
+
+config OR3_BI_BURSTINHIBIT
+	bool "Inhibit burst access"
+
+endchoice
+
+endif # BR3_MACHINE_UPM
+
+if BR3_MACHINE_SDRAM
+
+choice
+	prompt "Number of column address lines"
+
+config OR3_COLS_7
+	bool "7"
+
+config OR3_COLS_8
+	bool "8"
+
+config OR3_COLS_9
+	bool "9"
+
+config OR3_COLS_10
+	bool "10"
+
+config OR3_COLS_11
+	bool "11"
+
+config OR3_COLS_12
+	bool "12"
+
+config OR3_COLS_13
+	bool "13"
+
+config OR3_COLS_14
+	bool "14"
+
+endchoice
+
+choice
+	prompt "Number of rows address lines"
+
+config OR3_ROWS_9
+	bool "9"
+
+config OR3_ROWS_10
+	bool "10"
+
+config OR3_ROWS_11
+	bool "11"
+
+config OR3_ROWS_12
+	bool "12"
+
+config OR3_ROWS_13
+	bool "13"
+
+config OR3_ROWS_14
+	bool "14"
+
+config OR3_ROWS_15
+	bool "15"
+
+endchoice
+
+choice
+	prompt "Page mode select"
+
+config OR3_PMSEL_BTB
+	bool "Back-to-back"
+
+config OR3_PMSEL_KEPT_OPEN
+	bool "Page kept open until page miss or refresh"
+
+endchoice
+
+endif # BR3_MACHINE_SDRAM
+
+choice
+	prompt "Relaxed timing"
+
+config OR3_TRLX_NORMAL
+	bool "Normal"
+
+config OR3_TRLX_RELAXED
+	bool "Relaxed"
+
+endchoice
+
+choice
+	prompt "Extended hold time"
+
+config OR3_EHTR_NORMAL
+	depends on OR3_TRLX_NORMAL
+	bool "Normal"
+
+config OR3_EHTR_1_CYCLE
+	depends on OR3_TRLX_NORMAL
+	bool "1 idle clock cycle inserted"
+
+config OR3_EHTR_4_CYCLE
+	depends on OR3_TRLX_RELAXED
+	bool "4 idle clock cycles inserted"
+
+config OR3_EHTR_8_CYCLE
+	depends on OR3_TRLX_RELAXED
+	bool "8 idle clock cycles inserted"
+
+endchoice
+
+if !ARCH_MPC8308
+
+choice
+	prompt "External address latch delay"
+
+config OR3_EAD_NONE
+	bool "None"
+
+config OR3_EAD_EXTRA
+	bool "Extra"
+
+endchoice
+
+endif # !ARCH_MPC8308
+
+endif # ELBC_BR3_OR3
+
+config BR3_PORTSIZE
+	hex
+	default 0x800 if BR3_PORTSIZE_8BIT
+	default 0x1000 if BR3_PORTSIZE_16BIT
+	default 0x1800 if BR3_PORTSIZE_32BIT
+
+config BR3_ERRORCHECKING
+	hex
+	default 0x0 if !BR3_MACHINE_FCM
+	default 0x0 if BR3_ERRORCHECKING_DISABLED
+	default 0x200 if BR3_ERRORCHECKING_ECC_CHECKING
+	default 0x400 if BR3_ERRORCHECKING_BOTH
+
+config BR3_WRITE_PROTECT_BIT
+	hex
+	default 0x0 if !BR3_WRITE_PROTECT
+	default 0x100 if BR3_WRITE_PROTECT
+
+config BR3_MACHINE
+	hex
+	default 0x0 if BR3_MACHINE_GPCM
+	default 0x20 if BR3_MACHINE_FCM
+	default 0x60 if BR3_MACHINE_SDRAM
+	default 0x80 if BR3_MACHINE_UPMA
+	default 0xa0 if BR3_MACHINE_UPMB
+	default 0xc0 if BR3_MACHINE_UPMC
+
+config BR3_ATOMIC
+	hex
+	default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360
+	default 0x0 if BR3_ATOMIC_NONE
+	default 0x4 if BR3_ATOMIC_RAWA
+	default 0x8 if BR3_ATOMIC_WARA
+
+config BR3_VALID_BIT
+	hex
+	default 0x0 if !ELBC_BR3_OR3
+	default 0x1 if ELBC_BR3_OR3
+
+config OR3_AM
+	hex
+	default 0xffff8000 if OR3_AM_32_KBYTES && !BR3_MACHINE_SDRAM
+	default 0xffff0000 if OR3_AM_64_KBYTES
+	default 0xfffe0000 if OR3_AM_128_KBYTES
+	default 0xfffc0000 if OR3_AM_256_KBYTES
+	default 0xfff80000 if OR3_AM_512_KBYTES
+	default 0xfff00000 if OR3_AM_1_MBYTES
+	default 0xffe00000 if OR3_AM_2_MBYTES
+	default 0xffc00000 if OR3_AM_4_MBYTES
+	default 0xff800000 if OR3_AM_8_MBYTES
+	default 0xff000000 if OR3_AM_16_MBYTES
+	default 0xfe000000 if OR3_AM_32_MBYTES
+	default 0xfc000000 if OR3_AM_64_MBYTES
+	default 0xf8000000 if OR3_AM_128_MBYTES
+	default 0xf0000000 if OR3_AM_256_MBYTES
+	default 0xe0000000 if OR3_AM_512_MBYTES
+	default 0xc0000000 if OR3_AM_1_GBYTES
+	default 0x80000000 if OR3_AM_2_GBYTES
+	default 0x00000000 if OR3_AM_4_GBYTES
+
+config OR3_XAM
+	hex
+	default 0x0 if !OR3_XAM_SET
+	default 0x6000 if OR3_XAM_SET
+
+config OR3_BCTLD
+	hex
+	default 0x0 if OR3_BCTLD_ASSERTED
+	default 0x1000 if OR3_BCTLD_NOT_ASSERTED
+
+config OR3_BI
+	hex
+	default 0x0 if !BR3_MACHINE_UPM
+	default 0x0 if OR3_BI_BURSTSUPPORT
+	default 0x100 if OR3_BI_BURSTINHIBIT
+
+config OR3_COLS
+	hex
+	default 0x0 if !BR3_MACHINE_SDRAM
+	default 0x0 if OR3_COLS_7
+	default 0x400 if OR3_COLS_8
+	default 0x800 if OR3_COLS_9
+	default 0xc00 if OR3_COLS_10
+	default 0x1000 if OR3_COLS_11
+	default 0x1400 if OR3_COLS_12
+	default 0x1800 if OR3_COLS_13
+	default 0x1c00 if OR3_COLS_14
+
+config OR3_ROWS
+	hex
+	default 0x0 if !BR3_MACHINE_SDRAM
+	default 0x0 if OR3_ROWS_9
+	default 0x40 if OR3_ROWS_10
+	default 0x80 if OR3_ROWS_11
+	default 0xc0 if OR3_ROWS_12
+	default 0x100 if OR3_ROWS_13
+	default 0x140 if OR3_ROWS_14
+	default 0x180 if OR3_ROWS_15
+
+config OR3_PMSEL
+	hex
+	default 0x0 if !BR3_MACHINE_SDRAM
+	default 0x0 if OR3_PMSEL_BTB
+	default 0x20 if OR3_PMSEL_KEPT_OPEN
+
+config OR3_SCY
+	hex
+	default 0x0 if !BR3_MACHINE_GPCM && !BR3_MACHINE_FCM
+	default 0x0 if OR3_SCY_0
+	default 0x10 if OR3_SCY_1
+	default 0x20 if OR3_SCY_2
+	default 0x30 if OR3_SCY_3
+	default 0x40 if OR3_SCY_4
+	default 0x50 if OR3_SCY_5
+	default 0x60 if OR3_SCY_6
+	default 0x70 if OR3_SCY_7
+	default 0x80 if OR3_SCY_8
+	default 0x90 if OR3_SCY_9
+	default 0xa0 if OR3_SCY_10
+	default 0xb0 if OR3_SCY_11
+	default 0xc0 if OR3_SCY_12
+	default 0xd0 if OR3_SCY_13
+	default 0xe0 if OR3_SCY_14
+	default 0xf0 if OR3_SCY_15
+
+config OR3_PGS
+	hex
+	default 0x0 if !BR3_MACHINE_FCM
+	default 0x0 if OR3_PGS_SMALL
+	default 0x400 if OR3_PGS_LARGE
+
+config OR3_CSCT
+	hex
+	default 0x0 if !BR3_MACHINE_FCM
+	default 0x0 if OR3_CSCT_1_CYCLE
+	default 0x0 if OR3_CSCT_2_CYCLE
+	default 0x200 if OR3_CSCT_4_CYCLE
+	default 0x200 if OR3_CSCT_8_CYCLE
+
+config OR3_CST
+	hex
+	default 0x0 if !BR3_MACHINE_FCM
+	default 0x0 if OR3_CST_COINCIDENT
+	default 0x100 if OR3_CST_QUARTER_CLOCK
+	default 0x0 if OR3_CST_HALF_CLOCK
+	default 0x100 if OR3_CST_ONE_CLOCK
+
+config OR3_CHT
+	hex
+	default 0x0 if !BR3_MACHINE_FCM
+	default 0x0 if OR3_CHT_HALF_CLOCK
+	default 0x80 if OR3_CHT_ONE_CLOCK
+	default 0x0 if OR3_CHT_ONE_HALF_CLOCK
+	default 0x80 if OR3_CHT_TWO_CLOCK
+
+config OR3_RST
+	hex
+	default 0x0 if !BR3_MACHINE_FCM
+	default 0x0 if OR3_RST_THREE_QUARTER_CLOCK
+	default 0x8 if OR3_RST_ONE_CLOCK
+	default 0x0 if OR3_RST_ONE_HALF_CLOCK
+
+config OR3_CSNT
+	hex
+	default 0x0 if !BR3_MACHINE_GPCM
+	default 0x0 if OR3_CSNT_NORMAL
+	default 0x800 if OR3_CSNT_EARLIER
+
+config OR3_ACS
+	hex
+	default 0x0 if !BR3_MACHINE_GPCM
+	default 0x0 if OR3_ACS_SAME_TIME
+	default 0x400 if OR3_ACS_QUARTER_CYCLE_EARLIER
+	default 0x600 if OR3_ACS_HALF_CYCLE_EARLIER
+
+config OR3_XACS
+	hex
+	default 0x0 if !BR3_MACHINE_GPCM
+	default 0x0 if OR3_XACS_NORMAL
+	default 0x100 if OR3_XACS_EXTENDED
+
+config OR3_SETA
+	hex
+	default 0x0 if !BR3_MACHINE_GPCM
+	default 0x0 if OR3_SETA_INTERNAL
+	default 0x8 if OR3_SETA_EXTERNAL
+
+config OR3_TRLX
+	hex
+	default 0x0 if OR3_TRLX_NORMAL
+	default 0x4 if OR3_TRLX_RELAXED
+
+config OR3_EHTR
+	hex
+	default 0x0 if OR3_EHTR_NORMAL
+	default 0x2 if OR3_EHTR_1_CYCLE
+	default 0x0 if OR3_EHTR_4_CYCLE
+	default 0x2 if OR3_EHTR_8_CYCLE
+
+config OR3_EAD
+	hex
+	default 0x0 if ARCH_MPC8308
+	default 0x0 if OR3_EAD_NONE
+	default 0x1 if OR3_EAD_EXTRA

arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc4

@@ -0,0 +1,733 @@
+menuconfig ELBC_BR4_OR4
+	bool "ELBC BR4/OR4"
+
+if ELBC_BR4_OR4
+
+config BR4_OR4_NAME
+	string "Identifier"
+
+config BR4_OR4_BASE
+	hex "Port base"
+
+choice
+	prompt "Port size"
+
+config BR4_PORTSIZE_8BIT
+	bool "8-bit"
+
+config BR4_PORTSIZE_16BIT
+	depends on !BR4_MACHINE_FCM
+	bool "16-bit"
+
+
+config BR4_PORTSIZE_32BIT
+	depends on !BR4_MACHINE_FCM
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+	bool "32-bit"
+
+endchoice
+
+if BR4_MACHINE_FCM
+
+choice
+	prompt "Data Error Checking"
+
+config BR4_ERRORCHECKING_DISABLED
+	bool "Disabled"
+
+config BR4_ERRORCHECKING_ECC_CHECKING
+	bool "ECC checking / No ECC generation"
+
+config BR4_ERRORCHECKING_BOTH
+	bool "ECC checking and generation"
+
+endchoice
+
+endif
+
+config BR4_WRITE_PROTECT
+	bool "Write-protect"
+
+config BR4_MACHINE_UPM
+	bool
+
+choice
+	prompt "Machine select"
+
+config BR4_MACHINE_GPCM
+	bool "GPCM"
+
+config BR4_MACHINE_FCM
+	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	bool "FCM"
+
+config BR4_MACHINE_SDRAM
+	depends on ARCH_MPC8349 || ARCH_MPC8360
+	bool "SDRAM"
+
+config BR4_MACHINE_UPMA
+	select BR4_MACHINE_UPM
+	bool "UPM (A)"
+
+config BR4_MACHINE_UPMB
+	select BR4_MACHINE_UPM
+	bool "UPM (B)"
+
+config BR4_MACHINE_UPMC
+	select BR4_MACHINE_UPM
+	bool "UPM (C)"
+
+endchoice
+
+if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360
+
+choice
+	prompt "Atomic operations"
+
+config BR4_ATOMIC_NONE
+	bool "No atomic operations"
+
+config BR4_ATOMIC_RAWA
+	bool "Read-after-write-atomic"
+
+config BR4_ATOMIC_WARA
+	bool "Write-after-read-atomic"
+
+endchoice
+
+endif
+
+if BR4_MACHINE_GPCM || BR4_MACHINE_FCM || BR4_MACHINE_UPM || BR4_MACHINE_SDRAM
+
+choice
+	prompt "Address mask"
+
+config OR4_AM_32_KBYTES
+	depends on !BR4_MACHINE_SDRAM
+	bool "32 kb"
+
+config OR4_AM_64_KBYTES
+	bool "64 kb"
+
+config OR4_AM_128_KBYTES
+	bool "128 kb"
+
+config OR4_AM_256_KBYTES
+	bool "256 kb"
+
+config OR4_AM_512_KBYTES
+	bool "512 kb"
+
+config OR4_AM_1_MBYTES
+	bool "1 mb"
+
+config OR4_AM_2_MBYTES
+	bool "2 mb"
+
+config OR4_AM_4_MBYTES
+	bool "4 mb"
+
+config OR4_AM_8_MBYTES
+	bool "8 mb"
+
+config OR4_AM_16_MBYTES
+	bool "16 mb"
+
+config OR4_AM_32_MBYTES
+	bool "32 mb"
+
+config OR4_AM_64_MBYTES
+	bool "64 mb"
+
+# XXX: Some boards define 128MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR4_AM_128_MBYTES
+	bool "128 mb"
+
+# XXX: Some boards define 256MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR4_AM_256_MBYTES
+	bool "256 mb"
+
+config OR4_AM_512_MBYTES
+	depends on BR4_MACHINE_FCM
+	bool "512 mb"
+
+# XXX: Some boards define 1GB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR4_AM_1_GBYTES
+	bool "1 gb"
+
+config OR4_AM_2_GBYTES
+	depends on BR4_MACHINE_FCM
+	bool "2 gb"
+
+config OR4_AM_4_GBYTES
+	depends on BR4_MACHINE_FCM
+	bool "4 gb"
+
+endchoice
+
+config OR4_XAM_SET
+	bool "Set unused bytes after address mask"
+choice
+	prompt "Buffer control disable"
+
+config OR4_BCTLD_ASSERTED
+	bool "Asserted"
+
+config OR4_BCTLD_NOT_ASSERTED
+	bool "Not asserted"
+
+endchoice
+
+endif
+
+if BR4_MACHINE_GPCM || BR4_MACHINE_FCM
+
+choice
+	prompt "Cycle length in bus clocks"
+
+config OR4_SCY_0
+	bool "No wait states"
+
+config OR4_SCY_1
+	bool "1 wait state"
+
+config OR4_SCY_2
+	bool "2 wait states"
+
+config OR4_SCY_3
+	bool "3 wait states"
+
+config OR4_SCY_4
+	bool "4 wait states"
+
+config OR4_SCY_5
+	bool "5 wait states"
+
+config OR4_SCY_6
+	bool "6 wait states"
+
+config OR4_SCY_7
+	bool "7 wait states"
+
+config OR4_SCY_8
+	depends on BR4_MACHINE_GPCM
+	bool "8 wait states"
+
+config OR4_SCY_9
+	depends on BR4_MACHINE_GPCM
+	bool "9 wait states"
+
+config OR4_SCY_10
+	depends on BR4_MACHINE_GPCM
+	bool "10 wait states"
+
+config OR4_SCY_11
+	depends on BR4_MACHINE_GPCM
+	bool "11 wait states"
+
+config OR4_SCY_12
+	depends on BR4_MACHINE_GPCM
+	bool "12 wait states"
+
+config OR4_SCY_13
+	depends on BR4_MACHINE_GPCM
+	bool "13 wait states"
+
+config OR4_SCY_14
+	depends on BR4_MACHINE_GPCM
+	bool "14 wait states"
+
+config OR4_SCY_15
+	depends on BR4_MACHINE_GPCM
+	bool "15 wait states"
+
+endchoice
+
+endif # BR4_MACHINE_GPCM || BR4_MACHINE_FCM
+
+if BR4_MACHINE_GPCM
+
+choice
+	prompt "Chip select negotiation time"
+
+config OR4_CSNT_NORMAL
+	bool "Normal"
+
+config OR4_CSNT_EARLIER
+	bool "Earlier"
+
+endchoice
+
+choice
+	prompt "Address to chip-select setup"
+
+config OR4_ACS_SAME_TIME
+	bool "At the same time"
+
+config OR4_ACS_HALF_CYCLE_EARLIER
+	bool "Half of a bus clock cycle earlier"
+
+config OR4_ACS_QUARTER_CYCLE_EARLIER
+	bool "Half/Quarter of a bus clock cycle earlier"
+
+endchoice
+
+choice
+	prompt "Extra address to check-select setup"
+
+config OR4_XACS_NORMAL
+	bool "Normal"
+
+config OR4_XACS_EXTENDED
+	bool "Extended"
+
+endchoice
+
+choice
+	prompt "External address termination"
+
+config OR4_SETA_INTERNAL
+	bool "Access is terminated internally"
+
+config OR4_SETA_EXTERNAL
+	bool "Access is terminated externally"
+
+endchoice
+
+endif # BR4_MACHINE_GPCM
+
+if BR4_MACHINE_FCM
+
+choice
+	prompt "NAND Flash EEPROM page size"
+
+config OR4_PGS_SMALL
+	bool "Small page device"
+
+config OR4_PGS_LARGE
+	bool "Large page device"
+
+endchoice
+
+choice
+	prompt "Chip select to command time"
+
+config OR4_CSCT_1_CYCLE
+	depends on OR4_TRLX_NORMAL
+	bool "1 cycle"
+
+config OR4_CSCT_2_CYCLE
+	depends on OR4_TRLX_RELAXED
+	bool "2 cycles"
+
+config OR4_CSCT_4_CYCLE
+	depends on OR4_TRLX_NORMAL
+	bool "4 cycles"
+
+config OR4_CSCT_8_CYCLE
+	depends on OR4_TRLX_RELAXED
+	bool "8 cycles"
+
+endchoice
+
+choice
+	prompt "Command setup time"
+
+config OR4_CST_COINCIDENT
+	depends on OR4_TRLX_NORMAL
+	bool "Coincident with any command"
+
+config OR4_CST_QUARTER_CLOCK
+	depends on OR4_TRLX_NORMAL
+	bool "0.25 clocks after"
+
+config OR4_CST_HALF_CLOCK
+	depends on OR4_TRLX_RELAXED
+	bool "0.5 clocks after"
+
+config OR4_CST_ONE_CLOCK
+	depends on OR4_TRLX_RELAXED
+	bool "1 clock after"
+
+endchoice
+
+choice
+	prompt "Command hold time"
+
+config OR4_CHT_HALF_CLOCK
+	depends on OR4_TRLX_NORMAL
+	bool "0.5 clocks before"
+
+config OR4_CHT_ONE_CLOCK
+	depends on OR4_TRLX_NORMAL
+	bool "1 clock before"
+
+config OR4_CHT_ONE_HALF_CLOCK
+	depends on OR4_TRLX_RELAXED
+	bool "1.5 clocks before"
+
+config OR4_CHT_TWO_CLOCK
+	depends on OR4_TRLX_RELAXED
+	bool "2 clocks before"
+
+endchoice
+
+choice
+	prompt "Reset setup time"
+
+config OR4_RST_THREE_QUARTER_CLOCK
+	depends on OR4_TRLX_NORMAL
+	bool "0.75 clocks prior"
+
+config OR4_RST_ONE_HALF_CLOCK
+	depends on OR4_TRLX_RELAXED
+	bool "0.5 clocks prior"
+
+config OR4_RST_ONE_CLOCK
+	bool "1 clock prior"
+
+endchoice
+
+endif # BR4_MACHINE_FCM
+
+if BR4_MACHINE_UPM
+
+choice
+	prompt "Burst inhibit"
+
+config OR4_BI_BURSTSUPPORT
+	bool "Support burst access"
+
+config OR4_BI_BURSTINHIBIT
+	bool "Inhibit burst access"
+
+endchoice
+
+endif # BR4_MACHINE_UPM
+
+if BR4_MACHINE_SDRAM
+
+choice
+	prompt "Number of column address lines"
+
+config OR4_COLS_7
+	bool "7"
+
+config OR4_COLS_8
+	bool "8"
+
+config OR4_COLS_9
+	bool "9"
+
+config OR4_COLS_10
+	bool "10"
+
+config OR4_COLS_11
+	bool "11"
+
+config OR4_COLS_12
+	bool "12"
+
+config OR4_COLS_13
+	bool "13"
+
+config OR4_COLS_14
+	bool "14"
+
+endchoice
+
+choice
+	prompt "Number of rows address lines"
+
+config OR4_ROWS_9
+	bool "9"
+
+config OR4_ROWS_10
+	bool "10"
+
+config OR4_ROWS_11
+	bool "11"
+
+config OR4_ROWS_12
+	bool "12"
+
+config OR4_ROWS_13
+	bool "13"
+
+config OR4_ROWS_14
+	bool "14"
+
+config OR4_ROWS_15
+	bool "15"
+
+endchoice
+
+choice
+	prompt "Page mode select"
+
+config OR4_PMSEL_BTB
+	bool "Back-to-back"
+
+config OR4_PMSEL_KEPT_OPEN
+	bool "Page kept open until page miss or refresh"
+
+endchoice
+
+endif # BR4_MACHINE_SDRAM
+
+choice
+	prompt "Relaxed timing"
+
+config OR4_TRLX_NORMAL
+	bool "Normal"
+
+config OR4_TRLX_RELAXED
+	bool "Relaxed"
+
+endchoice
+
+choice
+	prompt "Extended hold time"
+
+config OR4_EHTR_NORMAL
+	depends on OR4_TRLX_NORMAL
+	bool "Normal"
+
+config OR4_EHTR_1_CYCLE
+	depends on OR4_TRLX_NORMAL
+	bool "1 idle clock cycle inserted"
+
+config OR4_EHTR_4_CYCLE
+	depends on OR4_TRLX_RELAXED
+	bool "4 idle clock cycles inserted"
+
+config OR4_EHTR_8_CYCLE
+	depends on OR4_TRLX_RELAXED
+	bool "8 idle clock cycles inserted"
+
+endchoice
+
+if !ARCH_MPC8308
+
+choice
+	prompt "External address latch delay"
+
+config OR4_EAD_NONE
+	bool "None"
+
+config OR4_EAD_EXTRA
+	bool "Extra"
+
+endchoice
+
+endif # !ARCH_MPC8308
+
+endif # ELBC_BR4_OR4
+
+config BR4_PORTSIZE
+	hex
+	default 0x800 if BR4_PORTSIZE_8BIT
+	default 0x1000 if BR4_PORTSIZE_16BIT
+	default 0x1800 if BR4_PORTSIZE_32BIT
+
+config BR4_ERRORCHECKING
+	hex
+	default 0x0 if !BR4_MACHINE_FCM
+	default 0x0 if BR4_ERRORCHECKING_DISABLED
+	default 0x200 if BR4_ERRORCHECKING_ECC_CHECKING
+	default 0x400 if BR4_ERRORCHECKING_BOTH
+
+config BR4_WRITE_PROTECT_BIT
+	hex
+	default 0x0 if !BR4_WRITE_PROTECT
+	default 0x100 if BR4_WRITE_PROTECT
+
+config BR4_MACHINE
+	hex
+	default 0x0 if BR4_MACHINE_GPCM
+	default 0x20 if BR4_MACHINE_FCM
+	default 0x60 if BR4_MACHINE_SDRAM
+	default 0x80 if BR4_MACHINE_UPMA
+	default 0xa0 if BR4_MACHINE_UPMB
+	default 0xc0 if BR4_MACHINE_UPMC
+
+config BR4_ATOMIC
+	hex
+	default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360
+	default 0x0 if BR4_ATOMIC_NONE
+	default 0x4 if BR4_ATOMIC_RAWA
+	default 0x8 if BR4_ATOMIC_WARA
+
+config BR4_VALID_BIT
+	hex
+	default 0x0 if !ELBC_BR4_OR4
+	default 0x1 if ELBC_BR4_OR4
+
+config OR4_AM
+	hex
+	default 0xffff8000 if OR4_AM_32_KBYTES && !BR4_MACHINE_SDRAM
+	default 0xffff0000 if OR4_AM_64_KBYTES
+	default 0xfffe0000 if OR4_AM_128_KBYTES
+	default 0xfffc0000 if OR4_AM_256_KBYTES
+	default 0xfff80000 if OR4_AM_512_KBYTES
+	default 0xfff00000 if OR4_AM_1_MBYTES
+	default 0xffe00000 if OR4_AM_2_MBYTES
+	default 0xffc00000 if OR4_AM_4_MBYTES
+	default 0xff800000 if OR4_AM_8_MBYTES
+	default 0xff000000 if OR4_AM_16_MBYTES
+	default 0xfe000000 if OR4_AM_32_MBYTES
+	default 0xfc000000 if OR4_AM_64_MBYTES
+	default 0xf8000000 if OR4_AM_128_MBYTES
+	default 0xf0000000 if OR4_AM_256_MBYTES
+	default 0xe0000000 if OR4_AM_512_MBYTES
+	default 0xc0000000 if OR4_AM_1_GBYTES
+	default 0x80000000 if OR4_AM_2_GBYTES
+	default 0x00000000 if OR4_AM_4_GBYTES
+
+config OR4_XAM
+	hex
+	default 0x0 if !OR4_XAM_SET
+	default 0x6000 if OR4_XAM_SET
+
+config OR4_BCTLD
+	hex
+	default 0x0 if OR4_BCTLD_ASSERTED
+	default 0x1000 if OR4_BCTLD_NOT_ASSERTED
+
+config OR4_BI
+	hex
+	default 0x0 if !BR4_MACHINE_UPM
+	default 0x0 if OR4_BI_BURSTSUPPORT
+	default 0x100 if OR4_BI_BURSTINHIBIT
+
+config OR4_COLS
+	hex
+	default 0x0 if !BR4_MACHINE_SDRAM
+	default 0x0 if OR4_COLS_7
+	default 0x400 if OR4_COLS_8
+	default 0x800 if OR4_COLS_9
+	default 0xc00 if OR4_COLS_10
+	default 0x1000 if OR4_COLS_11
+	default 0x1400 if OR4_COLS_12
+	default 0x1800 if OR4_COLS_13
+	default 0x1c00 if OR4_COLS_14
+
+config OR4_ROWS
+	hex
+	default 0x0 if !BR4_MACHINE_SDRAM
+	default 0x0 if OR4_ROWS_9
+	default 0x40 if OR4_ROWS_10
+	default 0x80 if OR4_ROWS_11
+	default 0xc0 if OR4_ROWS_12
+	default 0x100 if OR4_ROWS_13
+	default 0x140 if OR4_ROWS_14
+	default 0x180 if OR4_ROWS_15
+
+config OR4_PMSEL
+	hex
+	default 0x0 if !BR4_MACHINE_SDRAM
+	default 0x0 if OR4_PMSEL_BTB
+	default 0x20 if OR4_PMSEL_KEPT_OPEN
+
+config OR4_SCY
+	hex
+	default 0x0 if !BR4_MACHINE_GPCM && !BR4_MACHINE_FCM
+	default 0x0 if OR4_SCY_0
+	default 0x10 if OR4_SCY_1
+	default 0x20 if OR4_SCY_2
+	default 0x30 if OR4_SCY_3
+	default 0x40 if OR4_SCY_4
+	default 0x50 if OR4_SCY_5
+	default 0x60 if OR4_SCY_6
+	default 0x70 if OR4_SCY_7
+	default 0x80 if OR4_SCY_8
+	default 0x90 if OR4_SCY_9
+	default 0xa0 if OR4_SCY_10
+	default 0xb0 if OR4_SCY_11
+	default 0xc0 if OR4_SCY_12
+	default 0xd0 if OR4_SCY_13
+	default 0xe0 if OR4_SCY_14
+	default 0xf0 if OR4_SCY_15
+
+config OR4_PGS
+	hex
+	default 0x0 if !BR4_MACHINE_FCM
+	default 0x0 if OR4_PGS_SMALL
+	default 0x400 if OR4_PGS_LARGE
+
+config OR4_CSCT
+	hex
+	default 0x0 if !BR4_MACHINE_FCM
+	default 0x0 if OR4_CSCT_1_CYCLE
+	default 0x0 if OR4_CSCT_2_CYCLE
+	default 0x200 if OR4_CSCT_4_CYCLE
+	default 0x200 if OR4_CSCT_8_CYCLE
+
+config OR4_CST
+	hex
+	default 0x0 if !BR4_MACHINE_FCM
+	default 0x0 if OR4_CST_COINCIDENT
+	default 0x100 if OR4_CST_QUARTER_CLOCK
+	default 0x0 if OR4_CST_HALF_CLOCK
+	default 0x100 if OR4_CST_ONE_CLOCK
+
+config OR4_CHT
+	hex
+	default 0x0 if !BR4_MACHINE_FCM
+	default 0x0 if OR4_CHT_HALF_CLOCK
+	default 0x80 if OR4_CHT_ONE_CLOCK
+	default 0x0 if OR4_CHT_ONE_HALF_CLOCK
+	default 0x80 if OR4_CHT_TWO_CLOCK
+
+config OR4_RST
+	hex
+	default 0x0 if !BR4_MACHINE_FCM
+	default 0x0 if OR4_RST_THREE_QUARTER_CLOCK
+	default 0x8 if OR4_RST_ONE_CLOCK
+	default 0x0 if OR4_RST_ONE_HALF_CLOCK
+
+config OR4_CSNT
+	hex
+	default 0x0 if !BR4_MACHINE_GPCM
+	default 0x0 if OR4_CSNT_NORMAL
+	default 0x800 if OR4_CSNT_EARLIER
+
+config OR4_ACS
+	hex
+	default 0x0 if !BR4_MACHINE_GPCM
+	default 0x0 if OR4_ACS_SAME_TIME
+	default 0x400 if OR4_ACS_QUARTER_CYCLE_EARLIER
+	default 0x600 if OR4_ACS_HALF_CYCLE_EARLIER
+
+config OR4_XACS
+	hex
+	default 0x0 if !BR4_MACHINE_GPCM
+	default 0x0 if OR4_XACS_NORMAL
+	default 0x100 if OR4_XACS_EXTENDED
+
+config OR4_SETA
+	hex
+	default 0x0 if !BR4_MACHINE_GPCM
+	default 0x0 if OR4_SETA_INTERNAL
+	default 0x8 if OR4_SETA_EXTERNAL
+
+config OR4_TRLX
+	hex
+	default 0x0 if OR4_TRLX_NORMAL
+	default 0x4 if OR4_TRLX_RELAXED
+
+config OR4_EHTR
+	hex
+	default 0x0 if OR4_EHTR_NORMAL
+	default 0x2 if OR4_EHTR_1_CYCLE
+	default 0x0 if OR4_EHTR_4_CYCLE
+	default 0x2 if OR4_EHTR_8_CYCLE
+
+config OR4_EAD
+	hex
+	default 0x0 if ARCH_MPC8308
+	default 0x0 if OR4_EAD_NONE
+	default 0x1 if OR4_EAD_EXTRA

arch/powerpc/cpu/mpc83xx/elbc/elbc.h

@@ -0,0 +1,186 @@
+#ifdef CONFIG_ELBC_BR0_OR0
+#define CONFIG_SYS_BR0_PRELIM (\
+	CONFIG_BR0_OR0_BASE |\
+	CONFIG_BR0_PORTSIZE |\
+	CONFIG_BR0_ERRORCHECKING |\
+	CONFIG_BR0_WRITE_PROTECT_BIT |\
+	CONFIG_BR0_MACHINE |\
+	CONFIG_BR0_ATOMIC |\
+	CONFIG_BR0_VALID_BIT \
+)
+#define CONFIG_SYS_OR0_PRELIM (\
+	CONFIG_OR0_AM |\
+	CONFIG_OR0_XAM |\
+	CONFIG_OR0_BCTLD |\
+	CONFIG_OR0_BI |\
+	CONFIG_OR0_COLS |\
+	CONFIG_OR0_ROWS |\
+	CONFIG_OR0_PMSEL |\
+	CONFIG_OR0_SCY |\
+	CONFIG_OR0_PGS |\
+	CONFIG_OR0_CSCT |\
+	CONFIG_OR0_CST |\
+	CONFIG_OR0_CHT |\
+	CONFIG_OR0_RST |\
+	CONFIG_OR0_CSNT |\
+	CONFIG_OR0_ACS |\
+	CONFIG_OR0_XACS |\
+	CONFIG_OR0_SETA |\
+	CONFIG_OR0_TRLX |\
+	CONFIG_OR0_EHTR |\
+	CONFIG_OR0_EAD \
+)
+#endif /* CONFIG_ELBC_BR0_OR0 */
+
+#ifdef CONFIG_ELBC_BR1_OR1
+#define CONFIG_SYS_BR1_PRELIM (\
+	CONFIG_BR1_OR1_BASE |\
+	CONFIG_BR1_PORTSIZE |\
+	CONFIG_BR1_ERRORCHECKING |\
+	CONFIG_BR1_WRITE_PROTECT_BIT |\
+	CONFIG_BR1_MACHINE |\
+	CONFIG_BR1_ATOMIC |\
+	CONFIG_BR1_VALID_BIT \
+)
+#define CONFIG_SYS_OR1_PRELIM (\
+	CONFIG_OR1_AM |\
+	CONFIG_OR1_XAM |\
+	CONFIG_OR1_BCTLD |\
+	CONFIG_OR1_BI |\
+	CONFIG_OR1_COLS |\
+	CONFIG_OR1_ROWS |\
+	CONFIG_OR1_PMSEL |\
+	CONFIG_OR1_SCY |\
+	CONFIG_OR1_PGS |\
+	CONFIG_OR1_CSCT |\
+	CONFIG_OR1_CST |\
+	CONFIG_OR1_CHT |\
+	CONFIG_OR1_RST |\
+	CONFIG_OR1_CSNT |\
+	CONFIG_OR1_ACS |\
+	CONFIG_OR1_XACS |\
+	CONFIG_OR1_SETA |\
+	CONFIG_OR1_TRLX |\
+	CONFIG_OR1_EHTR |\
+	CONFIG_OR1_EAD \
+)
+#endif /* CONFIG_ELBC_BR1_OR1 */
+
+#ifdef CONFIG_ELBC_BR2_OR2
+#define CONFIG_SYS_BR2_PRELIM (\
+	CONFIG_BR2_OR2_BASE |\
+	CONFIG_BR2_PORTSIZE |\
+	CONFIG_BR2_ERRORCHECKING |\
+	CONFIG_BR2_WRITE_PROTECT_BIT |\
+	CONFIG_BR2_MACHINE |\
+	CONFIG_BR2_ATOMIC |\
+	CONFIG_BR2_VALID_BIT \
+)
+#define CONFIG_SYS_OR2_PRELIM (\
+	CONFIG_OR2_AM |\
+	CONFIG_OR2_XAM |\
+	CONFIG_OR2_BCTLD |\
+	CONFIG_OR2_BI |\
+	CONFIG_OR2_COLS |\
+	CONFIG_OR2_ROWS |\
+	CONFIG_OR2_PMSEL |\
+	CONFIG_OR2_SCY |\
+	CONFIG_OR2_PGS |\
+	CONFIG_OR2_CSCT |\
+	CONFIG_OR2_CST |\
+	CONFIG_OR2_CHT |\
+	CONFIG_OR2_RST |\
+	CONFIG_OR2_CSNT |\
+	CONFIG_OR2_ACS |\
+	CONFIG_OR2_XACS |\
+	CONFIG_OR2_SETA |\
+	CONFIG_OR2_TRLX |\
+	CONFIG_OR2_EHTR |\
+	CONFIG_OR2_EAD \
+)
+#endif /* CONFIG_ELBC_BR2_OR2 */
+
+#ifdef CONFIG_ELBC_BR3_OR3
+#define CONFIG_SYS_BR3_PRELIM (\
+	CONFIG_BR3_OR3_BASE |\
+	CONFIG_BR3_PORTSIZE |\
+	CONFIG_BR3_ERRORCHECKING |\
+	CONFIG_BR3_WRITE_PROTECT_BIT |\
+	CONFIG_BR3_MACHINE |\
+	CONFIG_BR3_ATOMIC |\
+	CONFIG_BR3_VALID_BIT \
+)
+#define CONFIG_SYS_OR3_PRELIM (\
+	CONFIG_OR3_AM |\
+	CONFIG_OR3_XAM |\
+	CONFIG_OR3_BCTLD |\
+	CONFIG_OR3_BI |\
+	CONFIG_OR3_COLS |\
+	CONFIG_OR3_ROWS |\
+	CONFIG_OR3_PMSEL |\
+	CONFIG_OR3_SCY |\
+	CONFIG_OR3_PGS |\
+	CONFIG_OR3_CSCT |\
+	CONFIG_OR3_CST |\
+	CONFIG_OR3_CHT |\
+	CONFIG_OR3_RST |\
+	CONFIG_OR3_CSNT |\
+	CONFIG_OR3_ACS |\
+	CONFIG_OR3_XACS |\
+	CONFIG_OR3_SETA |\
+	CONFIG_OR3_TRLX |\
+	CONFIG_OR3_EHTR |\
+	CONFIG_OR3_EAD \
+)
+#endif /* CONFIG_ELBC_BR3_OR3 */
+
+#ifdef CONFIG_ELBC_BR4_OR4
+#define CONFIG_SYS_BR4_PRELIM (\
+	CONFIG_BR4_OR4_BASE |\
+	CONFIG_BR4_PORTSIZE |\
+	CONFIG_BR4_ERRORCHECKING |\
+	CONFIG_BR4_WRITE_PROTECT_BIT |\
+	CONFIG_BR4_MACHINE |\
+	CONFIG_BR4_ATOMIC |\
+	CONFIG_BR4_VALID_BIT \
+)
+#define CONFIG_SYS_OR4_PRELIM (\
+	CONFIG_OR4_AM |\
+	CONFIG_OR4_XAM |\
+	CONFIG_OR4_BCTLD |\
+	CONFIG_OR4_BI |\
+	CONFIG_OR4_COLS |\
+	CONFIG_OR4_ROWS |\
+	CONFIG_OR4_PMSEL |\
+	CONFIG_OR4_SCY |\
+	CONFIG_OR4_PGS |\
+	CONFIG_OR4_CSCT |\
+	CONFIG_OR4_CST |\
+	CONFIG_OR4_CHT |\
+	CONFIG_OR4_RST |\
+	CONFIG_OR4_CSNT |\
+	CONFIG_OR4_ACS |\
+	CONFIG_OR4_XACS |\
+	CONFIG_OR4_SETA |\
+	CONFIG_OR4_TRLX |\
+	CONFIG_OR4_EHTR |\
+	CONFIG_OR4_EAD \
+)
+#endif /* CONFIG_ELBC_BR4_OR4 */
+
+#if defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_0)
+#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR0_PRELIM
+#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR0_PRELIM
+#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_1)
+#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR1_PRELIM
+#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR1_PRELIM
+#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_2)
+#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR2_PRELIM
+#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR2_PRELIM
+#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_3)
+#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR3_PRELIM
+#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR3_PRELIM
+#elif defined(CONFIG_ELBC_BR_OR_NAND_PRELIM_4)
+#define CONFIG_SYS_NAND_BR_PRELIM CONFIG_SYS_BR4_PRELIM
+#define CONFIG_SYS_NAND_OR_PRELIM CONFIG_SYS_OR4_PRELIM
+#endif

arch/powerpc/cpu/mpc83xx/fdt.c

@@ -16,7 +16,7 @@ extern void ft_qe_setup(void *blob);
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_BOOTCOUNT_LIMIT) && \
-	(defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
+	(defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X))
 #include <linux/immap_qe.h>
 
 void fdt_fixup_muram (void *blob)
@@ -52,7 +52,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
     defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
     defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
-#ifdef CONFIG_MPC8313
+#ifdef CONFIG_ARCH_MPC8313
 	/*
 	* mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
 	* h/w (see AN3545).  The base device tree in use has rev. 1 ID numbers,
@@ -116,14 +116,14 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #endif
 
 #ifdef CONFIG_SYS_NS16550
-	do_fixup_by_compat_u32(blob, "ns16550",
-		"clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
+        do_fixup_by_compat_u32(blob, "ns16550",
+                "clock-frequency", get_serial_clock(), 1);
 #endif
 
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 
 #if defined(CONFIG_BOOTCOUNT_LIMIT) && \
-	(defined(CONFIG_QE) && !defined(CONFIG_MPC831x))
+	(defined(CONFIG_QE) && !defined(CONFIG_ARCH_MPC831X))
 	fdt_fixup_muram (blob);
 #endif
 }

arch/powerpc/cpu/mpc83xx/hid/Kconfig

@@ -0,0 +1,565 @@
+menu "HID setup"
+
+menu "HID0 initial"
+
+config HID0_INIT_EMCP
+	bool "Enable machine check int on mcp"
+
+config HID0_INIT_ECPE
+	bool "Enable cache parity errors"
+
+config HID0_INIT_EBA
+	bool "Enable address parity checking"
+
+config HID0_INIT_EBD
+	bool "Enable data parity checking"
+
+choice
+	prompt "HID0 clock configuration"
+
+config HID0_INIT_CLKOUT_OFF
+	bool "Clock output off"
+
+config HID0_INIT_CLKOUT_CORE_HALF
+	bool "Core clock / 2"
+
+config HID0_INIT_CLKOUT_CORE
+	bool "Core clock"
+
+config HID0_INIT_CLKOUT_BUS
+	bool "Bus clock"
+
+endchoice
+
+config HID0_INIT_PAR
+	bool "Disable precharge of artry_out"
+
+config HID0_INIT_DOZE
+	bool "Enable doze mode"
+
+config HID0_INIT_NAP
+	bool "Enable nap mode"
+
+config HID0_INIT_SLEEP
+	bool "Enable sleep mode"
+
+config HID0_INIT_DPM
+	bool "Enable dynamic power management"
+
+config HID0_INIT_ICE
+	bool "Enable instruction cache"
+
+config HID0_INIT_DCE
+	bool "Enable data cache"
+
+config HID0_INIT_ILOCK
+	bool "Lock instruction cache"
+
+config HID0_INIT_DLOCK
+	bool "Lock data cache"
+
+config HID0_INIT_ICFI
+	bool "Flash invalidate instruction cache"
+
+config HID0_INIT_DCFI
+	bool "Flash invalidate data cache"
+
+config HID0_INIT_IFEM
+	bool "Enable m bit on bus for instruction fetches"
+
+config HID0_INIT_DECAREN
+	bool "Decrementer auto reload"
+
+config HID0_INIT_FBIOB
+	bool "Force indirect branch on the bus"
+
+config HID0_INIT_ABE
+	bool "Enable address broadcast"
+
+config HID0_INIT_NOOPTI
+	bool "No-op data cache touch intructions"
+
+endmenu
+
+menu "HID0 final"
+
+config HID0_FINAL_EMCP
+	bool "Enable machine check int on mcp"
+
+config HID0_FINAL_ECPE
+	bool "Enable cache parity errors"
+
+config HID0_FINAL_EBA
+	bool "Enable address parity checking"
+
+config HID0_FINAL_EBD
+	bool "Enable data parity checking"
+
+choice
+	prompt "HID0 clock configuration"
+
+config HID0_FINAL_CLKOUT_OFF
+	bool "Clock output off"
+
+config HID0_FINAL_CLKOUT_CORE_HALF
+	bool "Core clock / 2"
+
+config HID0_FINAL_CLKOUT_CORE
+	bool "Core clock"
+
+config HID0_FINAL_CLKOUT_BUS
+	bool "Bus clock"
+
+endchoice
+
+config HID0_FINAL_PAR
+	bool "Disable precharge of artry_out"
+
+config HID0_FINAL_DOZE
+	bool "Enable doze mode"
+
+config HID0_FINAL_NAP
+	bool "Enable nap mode"
+
+config HID0_FINAL_SLEEP
+	bool "Enable sleep mode"
+
+config HID0_FINAL_DPM
+	bool "Enable dynamic power management"
+
+config HID0_FINAL_ICE
+	bool "Enable instruction cache"
+
+config HID0_FINAL_DCE
+	bool "Enable data cache"
+
+config HID0_FINAL_ILOCK
+	bool "Lock instruction cache"
+
+config HID0_FINAL_DLOCK
+	bool "Lock data cache"
+
+config HID0_FINAL_ICFI
+	bool "Flash invalidate instruction cache"
+
+config HID0_FINAL_DCFI
+	bool "Flash invalidate data cache"
+
+config HID0_FINAL_IFEM
+	bool "Enable m bit on bus for instruction fetches"
+
+config HID0_FINAL_DECAREN
+	bool "Decrementer auto reload"
+
+config HID0_FINAL_FBIOB
+	bool "Force indirect branch on the bus"
+
+config HID0_FINAL_ABE
+	bool "Enable address broadcast"
+
+config HID0_FINAL_NOOPTI
+	bool "No-op data cache touch intructions"
+
+endmenu
+
+config HID0_INIT_EMCP_BIT
+	hex
+	default 0x0 if !HID0_INIT_EMCP
+	default 0x80000000 if HID0_INIT_EMCP
+
+config HID0_INIT_ECPE_BIT
+	hex
+	default 0x0 if !HID0_INIT_ECPE
+	default 0x40000000 if HID0_INIT_ECPE
+
+config HID0_INIT_EBA_BIT
+	hex
+	default 0x0 if !HID0_INIT_EBA
+	default 0x20000000 if HID0_INIT_EBA
+
+config HID0_INIT_EBD_BIT
+	hex
+	default 0x0 if !HID0_INIT_EBD
+	default 0x10000000 if HID0_INIT_EBD
+
+config HID0_INIT_CLKOUT
+	hex
+	default 0x0 if HID0_INIT_CLKOUT_OFF
+	default 0x8000000 if HID0_INIT_CLKOUT_CORE_HALF
+	default 0x2000000 if HID0_INIT_CLKOUT_CORE
+	default 0xa000000 if HID0_INIT_CLKOUT_BUS
+
+config HID0_INIT_PAR_BIT
+	hex
+	default 0x0 if !HID0_INIT_PAR
+	default 0x1000000 if HID0_INIT_PAR
+
+config HID0_INIT_DOZE_BIT
+	hex
+	default 0x0 if !HID0_INIT_DOZE
+	default 0x800000 if HID0_INIT_DOZE
+
+config HID0_INIT_NAP_BIT
+	hex
+	default 0x0 if !HID0_INIT_NAP
+	default 0x400000 if HID0_INIT_NAP
+
+config HID0_INIT_SLEEP_BIT
+	hex
+	default 0x0 if !HID0_INIT_SLEEP
+	default 0x200000 if HID0_INIT_SLEEP
+
+config HID0_INIT_DPM_BIT
+	hex
+	default 0x0 if !HID0_INIT_DPM
+	default 0x100000 if HID0_INIT_DPM
+
+config HID0_INIT_ICE_BIT
+	hex
+	default 0x0 if !HID0_INIT_ICE
+	default 0x8000 if HID0_INIT_ICE
+
+config HID0_INIT_DCE_BIT
+	hex
+	default 0x0 if !HID0_INIT_DCE
+	default 0x4000 if HID0_INIT_DCE
+
+config HID0_INIT_ILOCK_BIT
+	hex
+	default 0x0 if !HID0_INIT_ILOCK
+	default 0x2000 if HID0_INIT_ILOCK
+
+config HID0_INIT_DLOCK_BIT
+	hex
+	default 0x0 if !HID0_INIT_DLOCK
+	default 0x1000 if HID0_INIT_DLOCK
+
+config HID0_INIT_ICFI_BIT
+	hex
+	default 0x0 if !HID0_INIT_ICFI
+	default 0x800 if HID0_INIT_ICFI
+
+config HID0_INIT_DCFI_BIT
+	hex
+	default 0x0 if !HID0_INIT_DCFI
+	default 0x400 if HID0_INIT_DCFI
+
+config HID0_INIT_IFEM_BIT
+	hex
+	default 0x0 if !HID0_INIT_IFEM
+	default 0x80 if HID0_INIT_IFEM
+
+config HID0_INIT_DECAREN_BIT
+	hex
+	default 0x0 if !HID0_INIT_DECAREN
+	default 0x40 if HID0_INIT_DECAREN
+
+config HID0_INIT_FBIOB_BIT
+	hex
+	default 0x0 if !HID0_INIT_FBIOB
+	default 0x10 if HID0_INIT_FBIOB
+
+config HID0_INIT_ABE_BIT
+	hex
+	default 0x0 if !HID0_INIT_ABE
+	default 0x8 if HID0_INIT_ABE
+
+config HID0_INIT_NOOPTI_BIT
+	hex
+	default 0x0 if !HID0_INIT_NOOPTI
+	default 0x1 if HID0_INIT_NOOPTI
+
+config HID0_FINAL_EMCP_BIT
+	hex
+	default 0x0 if !HID0_FINAL_EMCP
+	default 0x80000000 if HID0_FINAL_EMCP
+
+config HID0_FINAL_ECPE_BIT
+	hex
+	default 0x0 if !HID0_FINAL_ECPE
+	default 0x40000000 if HID0_FINAL_ECPE
+
+config HID0_FINAL_EBA_BIT
+	hex
+	default 0x0 if !HID0_FINAL_EBA
+	default 0x20000000 if HID0_FINAL_EBA
+
+config HID0_FINAL_EBD_BIT
+	hex
+	default 0x0 if !HID0_FINAL_EBD
+	default 0x10000000 if HID0_FINAL_EBD
+
+config HID0_FINAL_CLKOUT
+	hex
+	default 0x0 if HID0_FINAL_CLKOUT_OFF
+	default 0x8000000 if HID0_FINAL_CLKOUT_CORE_HALF
+	default 0x2000000 if HID0_FINAL_CLKOUT_CORE
+	default 0xa000000 if HID0_FINAL_CLKOUT_BUS
+
+config HID0_FINAL_SBCLK_BIT
+	hex
+	default 0x0 if !HID0_FINAL_SBCLK
+	default 0x8000000 if HID0_FINAL_SBCLK
+
+config HID0_FINAL_ECLK_BIT
+	hex
+	default 0x0 if !HID0_FINAL_ECLK
+	default 0x2000000 if HID0_FINAL_ECLK
+
+config HID0_FINAL_PAR_BIT
+	hex
+	default 0x0 if !HID0_FINAL_PAR
+	default 0x1000000 if HID0_FINAL_PAR
+
+config HID0_FINAL_DOZE_BIT
+	hex
+	default 0x0 if !HID0_FINAL_DOZE
+	default 0x800000 if HID0_FINAL_DOZE
+
+config HID0_FINAL_NAP_BIT
+	hex
+	default 0x0 if !HID0_FINAL_NAP
+	default 0x400000 if HID0_FINAL_NAP
+
+config HID0_FINAL_SLEEP_BIT
+	hex
+	default 0x0 if !HID0_FINAL_SLEEP
+	default 0x200000 if HID0_FINAL_SLEEP
+
+config HID0_FINAL_DPM_BIT
+	hex
+	default 0x0 if !HID0_FINAL_DPM
+	default 0x100000 if HID0_FINAL_DPM
+
+config HID0_FINAL_ICE_BIT
+	hex
+	default 0x0 if !HID0_FINAL_ICE
+	default 0x8000 if HID0_FINAL_ICE
+
+config HID0_FINAL_DCE_BIT
+	hex
+	default 0x0 if !HID0_FINAL_DCE
+	default 0x4000 if HID0_FINAL_DCE
+
+config HID0_FINAL_ILOCK_BIT
+	hex
+	default 0x0 if !HID0_FINAL_ILOCK
+	default 0x2000 if HID0_FINAL_ILOCK
+
+config HID0_FINAL_DLOCK_BIT
+	hex
+	default 0x0 if !HID0_FINAL_DLOCK
+	default 0x1000 if HID0_FINAL_DLOCK
+
+config HID0_FINAL_ICFI_BIT
+	hex
+	default 0x0 if !HID0_FINAL_ICFI
+	default 0x800 if HID0_FINAL_ICFI
+
+config HID0_FINAL_DCFI_BIT
+	hex
+	default 0x0 if !HID0_FINAL_DCFI
+	default 0x400 if HID0_FINAL_DCFI
+
+config HID0_FINAL_IFEM_BIT
+	hex
+	default 0x0 if !HID0_FINAL_IFEM
+	default 0x80 if HID0_FINAL_IFEM
+
+config HID0_FINAL_DECAREN_BIT
+	hex
+	default 0x0 if !HID0_FINAL_DECAREN
+	default 0x40 if HID0_FINAL_DECAREN
+
+config HID0_FINAL_FBIOB_BIT
+	hex
+	default 0x0 if !HID0_FINAL_FBIOB
+	default 0x10 if HID0_FINAL_FBIOB
+
+config HID0_FINAL_ABE_BIT
+	hex
+	default 0x0 if !HID0_FINAL_ABE
+	default 0x8 if HID0_FINAL_ABE
+
+config HID0_FINAL_NOOPTI_BIT
+	hex
+	default 0x0 if !HID0_FINAL_NOOPTI
+	default 0x1 if HID0_FINAL_NOOPTI
+
+menu "HID2"
+
+config HID2_LET
+	bool "True little-endian mode"
+
+config HID2_IFEB
+	bool "Instruction fetch burst extension"
+
+config HID2_MESISTATE
+	bool "MESI state enable"
+
+config HID2_IFEC
+	bool "Instruction fetch cancel extension"
+
+config HID2_EBQS
+	bool "BIU queue sharing"
+
+config HID2_EBPX
+	bool "BIU pipeline extension"
+
+if !ARCH_MPC8360
+
+config HID2_ELRW
+	bool "Weighted LRU"
+
+config HID2_NOKS
+	bool "No kill for snoop"
+
+endif
+
+config HID2_HBE
+	bool "High bat enable"
+
+choice
+	prompt "Instruction cache way-lock"
+
+config HID2_IWLCK_NONE
+	bool "No ways locked"
+
+config HID2_IWLCK_0
+	bool "Way 0 locked"
+
+config HID2_IWLCK_1
+	bool "Way 0 through 1 locked"
+
+config HID2_IWLCK_2
+	bool "Way 0 through 2 locked"
+
+if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+
+config HID2_IWLCK_3
+	bool "Way 0 through 3 locked"
+
+config HID2_IWLCK_4
+	bool "Way 0 through 4 locked"
+
+config HID2_IWLCK_5
+	bool "Way 0 through 5 locked"
+
+config HID2_IWLCK_6
+	bool "Way 0 through 6 locked"
+
+endif
+
+endchoice
+
+config HID2_ICWP
+	bool "Instruction cache way protection"
+
+choice
+	prompt "Data cache way-lock"
+
+config HID2_DWLCK_NONE
+	bool "No ways locked"
+
+config HID2_DWLCK_0
+	bool "Way 0 locked"
+
+config HID2_DWLCK_1
+	bool "Way 0 through 1 locked"
+
+config HID2_DWLCK_2
+	bool "Way 0 through 2 locked"
+
+if ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+
+config HID2_DWLCK_3
+	bool "Way 0 through 3 locked"
+
+config HID2_DWLCK_4
+	bool "Way 0 through 4 locked"
+
+config HID2_DWLCK_5
+	bool "Way 0 through 5 locked"
+
+config HID2_DWLCK_6
+	bool "Way 0 through 6 locked"
+
+endif
+
+endchoice
+
+config HID2_LET_BIT
+	hex
+	default 0x0 if !HID2_LET
+	default 0x8000000 if HID2_LET
+
+config HID2_IFEB_BIT
+	hex
+	default 0x0 if !HID2_IFEB
+	default 0x4000000 if HID2_IFEB
+
+config HID2_MESISTATE_BIT
+	hex
+	default 0x0 if !HID2_MESISTATE
+	default 0x1000000 if HID2_MESISTATE
+
+config HID2_IFEC_BIT
+	hex
+	default 0x0 if !HID2_IFEC
+	default 0x800000 if HID2_IFEC
+
+config HID2_EBQS_BIT
+	hex
+	default 0x0 if !HID2_EBQS
+	default 0x400000 if HID2_EBQS
+
+config HID2_EBPX_BIT
+	hex
+	default 0x0 if !HID2_EBPX
+	default 0x200000 if HID2_EBPX
+
+config HID2_ELRW_BIT
+	hex
+	default 0x0 if !HID2_ELRW
+	default 0x100000 if HID2_ELRW
+
+config HID2_NOKS_BIT
+	hex
+	default 0x0 if !HID2_NOKS
+	default 0x80000 if HID2_NOKS
+
+config HID2_HBE_BIT
+	hex
+	default 0x0 if !HID2_HBE
+	default 0x40000 if HID2_HBE
+
+config HID2_IWLCK
+	hex
+	default 0x0 if HID2_IWLCK_NONE
+	default 0x2000 if HID2_IWLCK_0
+	default 0x4000 if HID2_IWLCK_1
+	default 0x6000 if HID2_IWLCK_2
+	default 0x8000 if HID2_IWLCK_3
+	default 0xA000 if HID2_IWLCK_4
+	default 0xC000 if HID2_IWLCK_5
+	default 0xE000 if HID2_IWLCK_6
+
+config HID2_ICWP_BIT
+	hex
+	default 0x0 if !HID2_ICWP
+	default 0x1000 if HID2_ICWP
+
+config HID2_DWLCK
+	hex
+	default 0x0 if HID2_DWLCK_NONE
+	default 0x20 if HID2_DWLCK_0
+	default 0x40 if HID2_DWLCK_1
+	default 0x60 if HID2_DWLCK_2
+	default 0x80 if HID2_DWLCK_3
+	default 0xA0 if HID2_DWLCK_4
+	default 0xC0 if HID2_DWLCK_5
+	default 0xE0 if HID2_DWLCK_6
+
+endmenu
+
+endmenu

arch/powerpc/cpu/mpc83xx/hid/hid.h

@@ -0,0 +1,72 @@
+#define CONFIG_SYS_HID0_FINAL ( \
+	CONFIG_HID0_FINAL_ABE_BIT |\
+	CONFIG_HID0_FINAL_CLKOUT |\
+	CONFIG_HID0_FINAL_DCE_BIT |\
+	CONFIG_HID0_FINAL_DCFI_BIT |\
+	CONFIG_HID0_FINAL_DECAREN_BIT |\
+	CONFIG_HID0_FINAL_DLOCK_BIT |\
+	CONFIG_HID0_FINAL_DOZE_BIT |\
+	CONFIG_HID0_FINAL_DPM_BIT |\
+	CONFIG_HID0_FINAL_EBA_BIT |\
+	CONFIG_HID0_FINAL_EBD_BIT |\
+	CONFIG_HID0_FINAL_ECLK_BIT |\
+	CONFIG_HID0_FINAL_ECPE_BIT |\
+	CONFIG_HID0_FINAL_EMCP_BIT |\
+	CONFIG_HID0_FINAL_FBIOB_BIT |\
+	CONFIG_HID0_FINAL_ICE_BIT |\
+	CONFIG_HID0_FINAL_ICFI_BIT |\
+	CONFIG_HID0_FINAL_IFEM_BIT |\
+	CONFIG_HID0_FINAL_ILOCK_BIT |\
+	CONFIG_HID0_FINAL_NAP_BIT |\
+	CONFIG_HID0_FINAL_NOOPTI_BIT |\
+	CONFIG_HID0_FINAL_PAR_BIT |\
+	CONFIG_HID0_FINAL_SBCLK_BIT |\
+	CONFIG_HID0_FINAL_SLEEP_BIT \
+)
+
+#define CONFIG_SYS_HID0_INIT ( \
+	CONFIG_HID0_INIT_ABE_BIT |\
+	CONFIG_HID0_INIT_CLKOUT |\
+	CONFIG_HID0_INIT_DCE_BIT |\
+	CONFIG_HID0_INIT_DCFI_BIT |\
+	CONFIG_HID0_INIT_DECAREN_BIT |\
+	CONFIG_HID0_INIT_DLOCK_BIT |\
+	CONFIG_HID0_INIT_DOZE_BIT |\
+	CONFIG_HID0_INIT_DPM_BIT |\
+	CONFIG_HID0_INIT_EBA_BIT |\
+	CONFIG_HID0_INIT_EBD_BIT |\
+	CONFIG_HID0_INIT_ECPE_BIT |\
+	CONFIG_HID0_INIT_EMCP_BIT |\
+	CONFIG_HID0_INIT_FBIOB_BIT |\
+	CONFIG_HID0_INIT_ICE_BIT |\
+	CONFIG_HID0_INIT_ICFI_BIT |\
+	CONFIG_HID0_INIT_IFEM_BIT |\
+	CONFIG_HID0_INIT_ILOCK_BIT |\
+	CONFIG_HID0_INIT_NAP_BIT |\
+	CONFIG_HID0_INIT_NOOPTI_BIT |\
+	CONFIG_HID0_INIT_PAR_BIT |\
+	CONFIG_HID0_INIT_SLEEP_BIT \
+)
+
+#ifdef CONFIG_TARGET_IDS8313
+/* IDS8313 defines a reserved bit; keep to not break compatibility */
+#define CONFIG_HID2_SPECIAL 0x00020000
+#else
+#define CONFIG_HID2_SPECIAL 0x0
+#endif
+
+#define CONFIG_SYS_HID2 ( \
+	CONFIG_HID2_LET_BIT |\
+	CONFIG_HID2_IFEB_BIT |\
+	CONFIG_HID2_MESISTATE_BIT |\
+	CONFIG_HID2_IFEC_BIT |\
+	CONFIG_HID2_EBQS_BIT |\
+	CONFIG_HID2_EBPX_BIT |\
+	CONFIG_HID2_ELRW_BIT |\
+	CONFIG_HID2_NOKS_BIT |\
+	CONFIG_HID2_HBE_BIT |\
+	CONFIG_HID2_IWLCK |\
+	CONFIG_HID2_ICWP_BIT |\
+	CONFIG_HID2_DWLCK |\
+	CONFIG_HID2_SPECIAL \
+)

arch/powerpc/cpu/mpc83xx/hrcw/Kconfig

@@ -0,0 +1,816 @@
+menu "Reset Configuration Word"
+
+choice
+	prompt "Local bus memory controller clock mode"
+
+config LBMC_CLOCK_MODE_1_1
+	bool "1 : 1"
+
+config LBMC_CLOCK_MODE_1_2
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	bool "1 : 2"
+
+endchoice
+
+choice
+	prompt "DDR SDRAM memory controller clock mode"
+
+config DDR_MC_CLOCK_MODE_1_2
+	bool "1 : 2"
+
+config DDR_MC_CLOCK_MODE_1_1
+	depends on ARCH_MPC8315 || ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	bool "1 : 1"
+
+endchoice
+
+if !ARCH_MPC8313 && !ARCH_MPC832X && !ARCH_MPC8349
+
+choice
+	prompt "System PLL VCO division"
+
+config SYSTEM_PLL_VCO_DIV_1
+	depends on !ARCH_MPC837X
+	bool "1"
+
+config SYSTEM_PLL_VCO_DIV_2
+	bool "2"
+
+config SYSTEM_PLL_VCO_DIV_4
+	depends on !ARCH_MPC831X
+	bool "4"
+
+config SYSTEM_PLL_VCO_DIV_8
+	depends on !ARCH_MPC831X
+	bool "8"
+
+endchoice
+
+endif
+
+choice
+	prompt "System PLL multiplication factor"
+
+config SYSTEM_PLL_FACTOR_2_1
+	bool "2 : 1"
+
+config SYSTEM_PLL_FACTOR_3_1
+	bool "3 : 1"
+
+config SYSTEM_PLL_FACTOR_4_1
+	bool "4 : 1"
+
+config SYSTEM_PLL_FACTOR_5_1
+	bool "5 : 1"
+
+config SYSTEM_PLL_FACTOR_6_1
+	bool "6 : 1"
+
+config SYSTEM_PLL_FACTOR_7_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "7 : 1"
+
+config SYSTEM_PLL_FACTOR_8_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "8 : 1"
+
+config SYSTEM_PLL_FACTOR_9_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "9 : 1"
+
+config SYSTEM_PLL_FACTOR_10_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "10 : 1"
+
+config SYSTEM_PLL_FACTOR_11_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "11 : 1"
+
+config SYSTEM_PLL_FACTOR_12_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "12 : 1"
+
+config SYSTEM_PLL_FACTOR_13_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "13 : 1"
+
+config SYSTEM_PLL_FACTOR_14_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "14 : 1"
+
+config SYSTEM_PLL_FACTOR_15_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360 || ARCH_MPC837X
+	bool "15 : 1"
+
+config SYSTEM_PLL_FACTOR_16_1
+	depends on ARCH_MPC8349 || ARCH_MPV8360
+	bool "16 : 1"
+
+endchoice
+
+config CORE_PLL_BYPASS
+	bool "Core PLL bypassed"
+
+if !CORE_PLL_BYPASS
+
+choice
+	prompt "Core PLL Ratio"
+
+config CORE_PLL_RATIO_1_1
+	bool "1 : 1"
+
+config CORE_PLL_RATIO_15_1
+	bool "1.5 : 1"
+
+config CORE_PLL_RATIO_2_1
+	bool "2 : 1"
+
+config CORE_PLL_RATIO_25_1
+	bool "2.5 : 1"
+
+config CORE_PLL_RATIO_3_1
+	bool "3 : 1"
+
+endchoice
+
+choice
+	prompt "Core PLL VCO Divider"
+
+config CORE_PLL_VCO_DIVIDER_2
+	bool "2"
+
+config CORE_PLL_VCO_DIVIDER_4
+	bool "4"
+
+config CORE_PLL_VCO_DIVIDER_8
+	depends on !ARCH_MPC8315
+	bool "8"
+
+endchoice
+
+endif
+
+if MPC83XX_QUICC_ENGINE
+
+choice
+	prompt "QUICC Engine PLL VCO Divider"
+
+config QUICC_VCO_DIVIDER_2
+	bool "2"
+
+config QUICC_VCO_DIVIDER_4
+	bool "4"
+
+config QUICC_VCO_DIVIDER_8
+	depends on ARCH_MPC8309
+	bool "8"
+
+endchoice
+
+choice
+	prompt "QUICC Engine PLL division factor"
+
+config QUICC_DIV_FACTOR_1
+	bool "1"
+
+config QUICC_DIV_FACTOR_2
+	bool "2"
+
+endchoice
+
+choice
+	prompt "QUICC Engine PLL multiplication factor"
+
+config QUICC_MULT_FACTOR_2
+	bool "2"
+
+config QUICC_MULT_FACTOR_3
+	bool "3"
+
+config QUICC_MULT_FACTOR_4
+	bool "4"
+
+config QUICC_MULT_FACTOR_5
+	bool "5"
+
+config QUICC_MULT_FACTOR_6
+	bool "6"
+
+config QUICC_MULT_FACTOR_7
+	bool "7"
+
+config QUICC_MULT_FACTOR_8
+	bool "8"
+
+config QUICC_MULT_FACTOR_9
+	depends on ARCH_MPC8360
+	bool "9"
+
+config QUICC_MULT_FACTOR_10
+	depends on ARCH_MPC8360
+	bool "10"
+
+config QUICC_MULT_FACTOR_11
+	depends on ARCH_MPC8360
+	bool "11"
+
+config QUICC_MULT_FACTOR_12
+	depends on ARCH_MPC8360
+	bool "12"
+
+config QUICC_MULT_FACTOR_13
+	depends on ARCH_MPC8360
+	bool "13"
+
+config QUICC_MULT_FACTOR_14
+	depends on ARCH_MPC8360
+	bool "14"
+
+config QUICC_MULT_FACTOR_15
+	depends on ARCH_MPC8360
+	bool "15"
+
+config QUICC_MULT_FACTOR_16
+	depends on ARCH_MPC8360
+	bool "16"
+
+config QUICC_MULT_FACTOR_17
+	depends on ARCH_MPC8360
+	bool "17"
+
+config QUICC_MULT_FACTOR_18
+	depends on ARCH_MPC8360
+	bool "18"
+
+config QUICC_MULT_FACTOR_19
+	depends on ARCH_MPC8360
+	bool "19"
+
+config QUICC_MULT_FACTOR_20
+	depends on ARCH_MPC8360
+	bool "20"
+
+config QUICC_MULT_FACTOR_21
+	depends on ARCH_MPC8360
+	bool "21"
+
+config QUICC_MULT_FACTOR_22
+	depends on ARCH_MPC8360
+	bool "22"
+
+config QUICC_MULT_FACTOR_23
+	depends on ARCH_MPC8360
+	bool "23"
+
+config QUICC_MULT_FACTOR_24
+	depends on ARCH_MPC8360
+	bool "24"
+
+config QUICC_MULT_FACTOR_25
+	depends on ARCH_MPC8360
+	bool "25"
+
+config QUICC_MULT_FACTOR_26
+	depends on ARCH_MPC8360
+	bool "26"
+
+config QUICC_MULT_FACTOR_27
+	depends on ARCH_MPC8360
+	bool "27"
+
+config QUICC_MULT_FACTOR_28
+	depends on ARCH_MPC8360
+	bool "28"
+
+config QUICC_MULT_FACTOR_29
+	depends on ARCH_MPC8360
+	bool "29"
+
+config QUICC_MULT_FACTOR_30
+	depends on ARCH_MPC8360
+	bool "30"
+
+config QUICC_MULT_FACTOR_31
+	depends on ARCH_MPC8360
+	bool "31"
+
+endchoice
+
+endif
+
+if MPC83XX_PCI_SUPPORT
+
+choice
+	prompt "PCI host mode"
+
+config PCI_HOST_MODE_DISABLE
+	bool "Disabled"
+
+config PCI_HOST_MODE_ENABLE
+	bool "Enabled"
+
+endchoice
+
+if ARCH_MPC8349
+
+choice
+	prompt "PCI 64-bit mode"
+
+config PCI_64BIT_MODE_DISABLE
+	bool "Disabled"
+
+config PCI_64BIT_MODE_ENABLE
+	bool "Enabled"
+
+endchoice
+
+endif
+
+choice
+	prompt "PCI internal arbiter 1 mode"
+
+config PCI_INT_ARBITER1_DISABLE
+	bool "Disabled"
+
+config PCI_INT_ARBITER1_ENABLE
+	bool "Enabled"
+
+endchoice
+
+if ARCH_MPC8349
+
+choice
+	prompt "PCI internal arbiter 2 mode"
+
+config PCI_INT_ARBITER2_DISABLE
+	bool "Disabled"
+
+config PCI_INT_ARBITER2_ENABLE
+	bool "Enabled"
+
+endchoice
+
+endif
+
+if ARCH_MPC8360
+
+choice
+	prompt "PCI clock output drive"
+
+config PCI_CLOCK_OUTPUT_DRIVE_DISABLE
+	bool "Disabled"
+
+config PCI_CLOCK_OUTPUT_DRIVE_ENABLE
+	bool "Enabled"
+
+endchoice
+
+endif
+
+endif
+
+choice
+	prompt "Core disable mode"
+
+config CORE_DISABLE_MODE_OFF
+	bool "Off"
+
+config CORE_DISABLE_MODE_ON
+	bool "On"
+
+endchoice
+
+choice
+	prompt "Boot Memory Space"
+
+config BOOT_MEMORY_SPACE_HIGH
+	bool "High"
+
+config BOOT_MEMORY_SPACE_LOW
+	bool "Low"
+
+endchoice
+
+choice
+	prompt "Boot Sequencer Configuration"
+
+config BOOT_SEQUENCER_DISABLED
+	bool "Disabled"
+
+config BOOT_SEQUENCER_NORMAL_I2C
+	bool "Normal I2C"
+
+config BOOT_SEQUENCER_EXTENDED_I2C
+	bool "Extended I2C"
+
+endchoice
+
+choice
+	prompt "Software Watchdog"
+
+config SOFTWARE_WATCHDOG_DISABLED
+	bool "Disabled"
+
+config SOFTWARE_WATCHDOG_ENABLED
+	bool "Enabled"
+
+endchoice
+
+choice
+	prompt "Boot ROM interface location"
+
+config BOOT_ROM_INTERFACE_DDR_SDRAM
+	bool "DDR_SDRAM"
+
+config BOOT_ROM_INTERFACE_PCI1
+	depends on MPC83XX_PCI_SUPPORT
+	bool "PCI1"
+
+config BOOT_ROM_INTERFACE_PCI2
+	depends on MPC83XX_PCI_SUPPORT && ARCH_MPC8349
+	bool "PCI2"
+
+config BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
+	depends on ARCH_MPC837X
+	bool "PCI2"
+
+config BOOT_ROM_INTERFACE_ESDHC
+	depends on ARCH_MPC8309
+	bool "eSDHC"
+
+config BOOT_ROM_INTERFACE_SPI
+	depends on ARCH_MPC8309
+	bool "SPI"
+
+config BOOT_ROM_INTERFACE_GPCM_8BIT
+	bool "Local bus GPCM - 8-bit ROM"
+
+config BOOT_ROM_INTERFACE_GPCM_16BIT
+	bool "Local bus GPCM - 16-bit ROM"
+
+config BOOT_ROM_INTERFACE_GPCM_32BIT
+	depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC837X
+	bool "Local bus GPCM - 32-bit ROM"
+
+config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL
+	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	bool "Local bus NAND Flash- 8-bit small page ROM"
+
+config BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE
+	depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+	bool "Local bus NAND Flash- 8-bit large page ROM"
+
+endchoice
+
+if MPC83XX_TSEC1_SUPPORT
+
+choice
+	prompt "TSEC1 mode"
+
+config TSEC1_MODE_MII
+	depends on !ARCH_MPC8349
+	bool "MII"
+
+config TSEC1_MODE_RMII
+	depends on ARCH_MPC831X && !ARCH_MPC8349
+	bool "RMII"
+
+config TSEC1_MODE_RGMII
+	bool "RGMII"
+
+config TSEC1_MODE_RTBI
+	depends on ARCH_MPC831X || ARCH_MPC837X
+	bool "RTBI"
+
+config TSEC1_MODE_GMII
+	depends on ARCH_MPC8349
+	bool "GMII"
+
+config TSEC1_MODE_TBI
+	depends on ARCH_MPC8349
+	bool "TBI"
+
+config TSEC1_MODE_SGMII
+	depends on ARCH_MPC831X || ARCH_MPC837X
+	bool "SGMII"
+
+endchoice
+
+endif
+
+if MPC83XX_TSEC2_SUPPORT
+
+choice
+	prompt "TSEC2 mode"
+
+config TSEC2_MODE_MII
+	depends on !ARCH_MPC8349
+	bool "MII"
+
+config TSEC2_MODE_RMII
+	depends on ARCH_MPC831X && !ARCH_MPC8349
+	bool "RMII"
+
+config TSEC2_MODE_RGMII
+	bool "RGMII"
+
+config TSEC2_MODE_RTBI
+	depends on ARCH_MPC831X || ARCH_MPC837X
+	bool "RTBI"
+
+config TSEC2_MODE_GMII
+	depends on ARCH_MPC8349
+	bool "GMII"
+
+config TSEC2_MODE_TBI
+	depends on ARCH_MPC8349
+	bool "TBI"
+
+config TSEC2_MODE_SGMII
+	depends on ARCH_MPC831X || ARCH_MPC837X
+	bool "SGMII"
+
+endchoice
+
+endif
+
+choice
+	prompt "True litle-endian mode"
+
+config TRUE_LITTLE_ENDIAN_BIG_ENDIAN
+	bool "Big-endian"
+
+config TRUE_LITTLE_ENDIAN_LITTLE_ENDIAN
+	bool "Little-endian"
+
+endchoice
+
+if ARCH_MPC8360
+
+choice
+	prompt "Secondary DDR IO"
+
+config SECONDARY_DDR_IO_DISABLE
+	bool "Disable"
+
+config SECONDARY_DDR_IO_ENABLE
+	bool "Enable"
+
+endchoice
+
+endif
+
+if ARCH_MPC831X || ARCH_MPC832X || ARCH_MPC8349 || ARCH_MPC8360
+
+choice
+	prompt "LALE timing"
+
+config LALE_TIMING_NORMAL
+	bool "Normal"
+
+config LALE_TIMING_EARLIER
+	bool "Earlier"
+
+endchoice
+
+endif
+
+if MPC83XX_LDP_PIN
+
+choice
+	prompt "LDP pin mux state"
+
+config LDP_PIN_MUX_STATE_1
+	bool "Inital value 1"
+
+config LDP_PIN_MUX_STATE_0
+	bool "Inital value 0"
+
+endchoice
+
+endif
+
+endmenu
+
+config LBMC_CLOCK_MODE
+	int
+	default 0 if LBMC_CLOCK_MODE_1_1
+	default 1 if LBMC_CLOCK_MODE_1_2
+
+config DDR_MC_CLOCK_MODE
+	int
+	default 1 if DDR_MC_CLOCK_MODE_1_2
+	default 0 if DDR_MC_CLOCK_MODE_1_1
+
+config SYSTEM_PLL_VCO_DIV
+	int
+	default 0 if ARCH_MPC8349 || ARCH_MPC832X
+	default 2 if ARCH_MPC8313
+	default 0 if SYSTEM_PLL_VCO_DIV_2 && !ARCH_MPC8360 && !ARCH_MPC837X
+	default 1 if SYSTEM_PLL_VCO_DIV_4 && !ARCH_MPC8360 && !ARCH_MPC837X
+	default 2 if SYSTEM_PLL_VCO_DIV_8 && !ARCH_MPC8360 && !ARCH_MPC837X
+	default 0 if SYSTEM_PLL_VCO_DIV_4 && (ARCH_MPC8360 || ARCH_MPC837X)
+	default 1 if SYSTEM_PLL_VCO_DIV_8 && (ARCH_MPC8360 || ARCH_MPC837X)
+	default 2 if SYSTEM_PLL_VCO_DIV_2 && (ARCH_MPC8360 || ARCH_MPC837X)
+	default 3 if SYSTEM_PLL_VCO_DIV_1
+
+config SYSTEM_PLL_FACTOR
+	int
+	default 2 if SYSTEM_PLL_FACTOR_2_1
+	default 3 if SYSTEM_PLL_FACTOR_3_1
+	default 4 if SYSTEM_PLL_FACTOR_4_1
+	default 5 if SYSTEM_PLL_FACTOR_5_1
+	default 6 if SYSTEM_PLL_FACTOR_6_1
+	default 7 if SYSTEM_PLL_FACTOR_7_1
+	default 8 if SYSTEM_PLL_FACTOR_8_1
+	default 9 if SYSTEM_PLL_FACTOR_9_1
+	default 10 if SYSTEM_PLL_FACTOR_10_1
+	default 11 if SYSTEM_PLL_FACTOR_11_1
+	default 12 if SYSTEM_PLL_FACTOR_12_1
+	default 13 if SYSTEM_PLL_FACTOR_13_1
+	default 14 if SYSTEM_PLL_FACTOR_14_1
+	default 15 if SYSTEM_PLL_FACTOR_15_1
+	default 0 if SYSTEM_PLL_FACTOR_16_1
+
+config CORE_PLL_RATIO
+	hex
+	default 0x0 if CORE_PLL_BYPASS
+	default 0x02 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_2
+	default 0x22 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_4
+	default 0x42 if CORE_PLL_RATIO_1_1 && CORE_PLL_VCO_DIVIDER_8
+	default 0x03 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_2
+	default 0x23 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_4
+	default 0x43 if CORE_PLL_RATIO_15_1 && CORE_PLL_VCO_DIVIDER_8
+	default 0x04 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_2
+	default 0x24 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_4
+	default 0x44 if CORE_PLL_RATIO_2_1 && CORE_PLL_VCO_DIVIDER_8
+	default 0x05 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_2
+	default 0x25 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_4
+	default 0x45 if CORE_PLL_RATIO_25_1 && CORE_PLL_VCO_DIVIDER_8
+	default 0x06 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_2
+	default 0x26 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_4
+	default 0x46 if CORE_PLL_RATIO_3_1 && CORE_PLL_VCO_DIVIDER_8
+
+config CORE_DISABLE_MODE
+	int
+	default 0 if CORE_DISABLE_MODE_OFF
+	default 1 if CORE_DISABLE_MODE_ON
+
+config BOOT_MEMORY_SPACE
+	int
+	default 0 if BOOT_MEMORY_SPACE_LOW
+	default 1 if BOOT_MEMORY_SPACE_HIGH
+
+config BOOT_SEQUENCER
+	int
+	default 0 if BOOT_SEQUENCER_DISABLED
+	default 1 if BOOT_SEQUENCER_NORMAL_I2C
+	default 2 if BOOT_SEQUENCER_EXTENDED_I2C
+
+config SOFTWARE_WATCHDOG
+	int
+	default 0 if SOFTWARE_WATCHDOG_DISABLED
+	default 1 if SOFTWARE_WATCHDOG_ENABLED
+
+config BOOT_ROM_INTERFACE
+	hex
+	default 0x0 if BOOT_ROM_INTERFACE_DDR_SDRAM
+	default 0x4 if BOOT_ROM_INTERFACE_PCI1
+	default 0x8 if BOOT_ROM_INTERFACE_PCI2
+	default 0x8 if BOOT_ROM_INTERFACE_ESDHC
+	default 0xc if BOOT_ROM_INTERFACE_SPI
+	default 0xc if BOOT_ROM_INTERFACE_ON_CHIP_BOOT_ROM
+	default 0x14 if BOOT_ROM_INTERFACE_GPCM_8BIT
+	default 0x18 if BOOT_ROM_INTERFACE_GPCM_16BIT
+	default 0x1c if BOOT_ROM_INTERFACE_GPCM_32BIT
+	default 0x5 if BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_SMALL
+	default 0x15 if BOOT_ROM_INTERFACE_NAND_FLASH_8BIT_LARGE
+
+config TSEC1_MODE
+	hex
+	default 0x0 if !MPC83XX_TSEC1_SUPPORT
+	default 0x0 if TSEC1_MODE_MII
+	default 0x1 if TSEC1_MODE_RMII
+	default 0x3 if TSEC1_MODE_RGMII && !ARCH_MPC8349
+	default 0x5 if TSEC1_MODE_RTBI && !ARCH_MPC8349
+	default 0x6 if TSEC1_MODE_SGMII
+	default 0x0 if TSEC1_MODE_RGMII && ARCH_MPC8349
+	default 0x1 if TSEC1_MODE_RTBI && ARCH_MPC8349
+	default 0x2 if TSEC1_MODE_GMII
+	default 0x3 if TSEC1_MODE_TBI
+
+config TSEC2_MODE
+	hex
+	default 0x0 if !MPC83XX_TSEC2_SUPPORT
+	default 0x0 if TSEC2_MODE_MII
+	default 0x1 if TSEC2_MODE_RMII
+	default 0x3 if TSEC2_MODE_RGMII && !ARCH_MPC8349
+	default 0x5 if TSEC2_MODE_RTBI && !ARCH_MPC8349
+	default 0x6 if TSEC2_MODE_SGMII
+	default 0x0 if TSEC2_MODE_RGMII && ARCH_MPC8349
+	default 0x1 if TSEC2_MODE_RTBI && ARCH_MPC8349
+	default 0x2 if TSEC2_MODE_GMII
+	default 0x3 if TSEC2_MODE_TBI
+
+config SECONDARY_DDR_IO
+	int
+	default 0 if !ARCH_MPC8360
+	default 0 if SECONDARY_DDR_IO_DISABLE
+	default 1 if SECONDARY_DDR_IO_ENABLE
+
+config TRUE_LITTLE_ENDIAN
+	int
+	default 0 if TRUE_LITTLE_ENDIAN_BIG_ENDIAN
+	default 1 if TRUE_LITTLE_ENDIAN_LITTLE_ENDIAN
+
+config LALE_TIMING
+	int
+	default 0 if ARCH_MPC830X || ARCH_MPC837X
+	default 0 if LALE_TIMING_NORMAL
+	default 1 if LALE_TIMING_EARLIER
+
+config LDP_PIN_MUX_STATE
+	int
+	default 0 if !MPC83XX_LDP_PIN
+	default 0 if LDP_PIN_MUX_STATE_1
+	default 1 if LDP_PIN_MUX_STATE_0
+
+config QUICC_VCO_DIVIDER
+	int
+	default 0 if !MPC83XX_QUICC_ENGINE
+	default 0 if QUICC_VCO_DIVIDER_2 && ARCH_MPC8309
+	default 1 if QUICC_VCO_DIVIDER_4 && ARCH_MPC8309
+	default 2 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8309
+	default 2 if QUICC_VCO_DIVIDER_2 && (ARCH_MPC832X || ARCH_MPC8360)
+	default 0 if QUICC_VCO_DIVIDER_4 && (ARCH_MPC832X || ARCH_MPC8360)
+	default 1 if QUICC_VCO_DIVIDER_8 && ARCH_MPC8360
+
+config QUICC_DIV_FACTOR
+	int
+	default 0 if !MPC83XX_QUICC_ENGINE
+	default 0 if QUICC_DIV_FACTOR_1
+	default 1 if QUICC_DIV_FACTOR_2
+
+config QUICC_MULT_FACTOR
+	int
+	default 0 if !MPC83XX_QUICC_ENGINE
+	default 2 if QUICC_MULT_FACTOR_2
+	default 3 if QUICC_MULT_FACTOR_3
+	default 4 if QUICC_MULT_FACTOR_4
+	default 5 if QUICC_MULT_FACTOR_5
+	default 6 if QUICC_MULT_FACTOR_6
+	default 7 if QUICC_MULT_FACTOR_7
+	default 8 if QUICC_MULT_FACTOR_8
+	default 9 if QUICC_MULT_FACTOR_9
+	default 10 if QUICC_MULT_FACTOR_10
+	default 11 if QUICC_MULT_FACTOR_11
+	default 12 if QUICC_MULT_FACTOR_12
+	default 13 if QUICC_MULT_FACTOR_13
+	default 14 if QUICC_MULT_FACTOR_14
+	default 15 if QUICC_MULT_FACTOR_15
+	default 16 if QUICC_MULT_FACTOR_16
+	default 17 if QUICC_MULT_FACTOR_17
+	default 18 if QUICC_MULT_FACTOR_18
+	default 19 if QUICC_MULT_FACTOR_19
+	default 20 if QUICC_MULT_FACTOR_20
+	default 21 if QUICC_MULT_FACTOR_21
+	default 22 if QUICC_MULT_FACTOR_22
+	default 23 if QUICC_MULT_FACTOR_23
+	default 24 if QUICC_MULT_FACTOR_24
+	default 25 if QUICC_MULT_FACTOR_25
+	default 26 if QUICC_MULT_FACTOR_26
+	default 27 if QUICC_MULT_FACTOR_27
+	default 28 if QUICC_MULT_FACTOR_28
+	default 29 if QUICC_MULT_FACTOR_29
+	default 30 if QUICC_MULT_FACTOR_30
+	default 31 if QUICC_MULT_FACTOR_31
+
+config PCI_HOST_MODE
+	int
+	default 0 if !MPC83XX_PCI_SUPPORT && !ARCH_MPC8308
+	default 0 if PCI_HOST_MODE_DISABLE
+	default 1 if PCI_HOST_MODE_ENABLE || ARCH_MPC8308 # MPC8308 needs this bit set regardless
+
+config PCI_64BIT_MODE
+	int
+	default 0 if !ARCH_MPC8349
+	default 0 if PCI_64BIT_MODE_DISABLE
+	default 1 if PCI_64BIT_MODE_ENABLE
+
+config PCI_INT_ARBITER1
+	int
+	default 0 if !MPC83XX_PCI_SUPPORT && !ARCH_MPC8308
+	default 0 if PCI_INT_ARBITER1_DISABLE
+	default 1 if PCI_INT_ARBITER1_ENABLE || ARCH_MPC8308 # MPC8308 needs this bit set regardless
+
+config PCI_INT_ARBITER2
+	int
+	default 0 if !ARCH_MPC8349
+	default 0 if PCI_INT_ARBITER2_DISABLE
+	default 1 if PCI_INT_ARBITER2_ENABLE
+
+config PCI_CLOCK_OUTPUT_DRIVE
+	int
+	default 0 if !ARCH_MPC8360
+	default 0 if PCI_CLOCK_OUTPUT_DRIVE_DISABLE
+	default 1 if PCI_CLOCK_OUTPUT_DRIVE_ENABLE

arch/powerpc/cpu/mpc83xx/hrcw/hrcw.h

@@ -0,0 +1,37 @@
+#ifdef CONFIG_ARCH_MPC8349
+#define TSEC1_MODE_SHIFT 17
+#define TSEC2_MODE_SHIFT 19
+#else
+#define TSEC1_MODE_SHIFT 18
+#define TSEC2_MODE_SHIFT 21
+#endif
+
+#define CONFIG_SYS_HRCW_LOW (\
+	(CONFIG_LBMC_CLOCK_MODE << (31 - 0)) |\
+	(CONFIG_DDR_MC_CLOCK_MODE << (31 - 1)) |\
+	(CONFIG_SYSTEM_PLL_VCO_DIV << (31 - 3)) |\
+	(CONFIG_SYSTEM_PLL_FACTOR << (31 - 7)) |\
+	(CONFIG_CORE_PLL_RATIO << (31 - 15)) |\
+	(CONFIG_QUICC_VCO_DIVIDER << (31 - 25)) |\
+	(CONFIG_QUICC_DIV_FACTOR << (31 - 26)) |\
+	(CONFIG_QUICC_MULT_FACTOR << (31 - 31)) \
+	)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+	(CONFIG_PCI_HOST_MODE << (31 - 0)) |\
+	(CONFIG_PCI_64BIT_MODE << (31 - 1)) |\
+	(CONFIG_PCI_INT_ARBITER1 << (31 - 2)) |\
+	(CONFIG_PCI_INT_ARBITER2 << (31 - 3)) |\
+	(CONFIG_PCI_CLOCK_OUTPUT_DRIVE << (31 - 3)) |\
+	(CONFIG_CORE_DISABLE_MODE << (31 - 4)) |\
+	(CONFIG_BOOT_MEMORY_SPACE << (31 - 5)) |\
+	(CONFIG_BOOT_SEQUENCER << (31 - 7)) |\
+	(CONFIG_SOFTWARE_WATCHDOG << (31 - 8)) |\
+	(CONFIG_BOOT_ROM_INTERFACE << (31 - 13)) |\
+	(CONFIG_TSEC1_MODE << (31 - TSEC1_MODE_SHIFT)) |\
+	(CONFIG_TSEC2_MODE << (31 - TSEC2_MODE_SHIFT)) |\
+	(CONFIG_SECONDARY_DDR_IO << (31 - 27)) |\
+	(CONFIG_TRUE_LITTLE_ENDIAN << (31 - 28)) |\
+	(CONFIG_LALE_TIMING << (31 - 29)) |\
+	(CONFIG_LDP_PIN_MUX_STATE << (31 - 30)) \
+	)

arch/powerpc/cpu/mpc83xx/initreg/Kconfig

@@ -0,0 +1,6 @@
+menu "Initial register configuration"
+
+source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr"
+source "arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr"
+
+endmenu

arch/powerpc/cpu/mpc83xx/initreg/Kconfig.lcrr

@@ -0,0 +1,139 @@
+menu "LCRR - Clock Ratio Register register"
+
+if !ARCH_MPC8309 && !ARCH_MPC831X && !ARCH_MPC832X
+
+choice
+	prompt "DLL bypass"
+
+config LCRR_DBYP_UNSET
+	bool "Don't set value"
+
+config LCRR_DBYP_PLL_ENABLED
+	bool "PLL enabled"
+
+config LCRR_DBYP_PLL_BYPASSED
+	bool "PLL bypassed"
+
+endchoice
+
+endif
+
+if ARCH_MPC834X || ARCH_MPC8360
+
+choice
+	prompt "Additional delay cycles for SDRAM control signals"
+
+config LCRR_BUFCMDC_UNSET
+	bool "Don't set value"
+
+config LCRR_BUFCMDC_4
+	bool "4"
+
+config LCRR_BUFCMDC_1
+	bool "1"
+
+config LCRR_BUFCMDC_2
+	bool "2"
+
+config LCRR_BUFCMDC_3
+	bool "3"
+
+endchoice
+
+choice
+	prompt "Extended CAS latency"
+
+config LCRR_ECL_UNSET
+	bool "Don't set value"
+
+config LCRR_ECL_4
+	bool "4"
+
+config LCRR_ECL_5
+	bool "5"
+
+config LCRR_ECL_6
+	bool "6"
+
+config LCRR_ECL_7
+	bool "7"
+
+endchoice
+
+endif # ARCH_MPC834X || ARCH_MPC8360
+
+if !ARCH_MPC8308
+
+choice
+	prompt "External address delay cycles"
+
+config LCRR_EADC_UNSET
+	bool "Don't set value"
+
+config LCRR_EADC_4
+	bool "4"
+
+config LCRR_EADC_1
+	bool "1"
+
+config LCRR_EADC_2
+	bool "2"
+
+config LCRR_EADC_3
+	bool "3"
+
+endchoice
+
+endif # !ARCH_MPC8308
+
+choice
+	prompt "System clock divider"
+
+config LCRR_CLKDIV_UNSET
+	bool "Don't set value"
+
+config LCRR_CLKDIV_2
+	bool "2"
+
+config LCRR_CLKDIV_4
+	bool "4"
+
+config LCRR_CLKDIV_8
+	bool "8"
+
+endchoice
+
+config LCRR_DBYP
+	hex
+	default 0x0 if LCRR_DBYP_UNSET || LCRR_DBYP_PLL_ENABLED
+	default 0x80000000 if LCRR_DBYP_PLL_BYPASSED
+
+config LCRR_BUFCMDC
+	hex
+	default 0x0 if LCRR_BUFCMDC_4 || LCRR_BUFCMDC_UNSET
+	default 0x10000000 if LCRR_BUFCMDC_1
+	default 0x20000000 if LCRR_BUFCMDC_2
+	default 0x30000000 if LCRR_BUFCMDC_3
+
+config LCRR_ECL
+	hex
+	default 0x0 if LCRR_ECL_4 || LCRR_ECL_UNSET
+	default 0x1000000 if LCRR_ECL_5
+	default 0x2000000 if LCRR_ECL_6
+	default 0x3000000 if LCRR_ECL_7
+
+config LCRR_EADC
+	hex
+	default 0x0 if LCRR_EADC_4 || LCRR_EADC_UNSET
+	default 0x10000 if LCRR_EADC_1
+	default 0x20000 if LCRR_EADC_2
+	default 0x30000 if LCRR_EADC_3
+
+config LCRR_CLKDIV
+	hex
+	default 0x0 if LCRR_CLKDIV_UNSET
+	default 0x2 if LCRR_CLKDIV_2
+	default 0x4 if LCRR_CLKDIV_4
+	default 0x8 if LCRR_CLKDIV_8
+
+endmenu

arch/powerpc/cpu/mpc83xx/initreg/Kconfig.spcr

@@ -0,0 +1,115 @@
+menu "SPCR - System priority and configuration register"
+
+choice
+	prompt "Optimize"
+
+config SPCR_OPT_UNSET
+	bool "Don't set value"
+
+config SPCR_OPT_NONE
+	bool "No performance enhancement"
+
+config SPCR_OPT_SPEC_READ
+	bool "Performance enhancement by speculative read"
+
+endchoice
+
+if ARCH_MPC8308 || ARCH_MPC831X || ARCH_MPC837X
+
+choice
+	prompt "TSEC emergency priority"
+
+config SPCR_TSECEP_UNSET
+	bool "Don't set value"
+
+config SPCR_TSECEP_0
+	bool "Level 0 (lowest priority)"
+
+config SPCR_TSECEP_1
+	bool "Level 1"
+
+config SPCR_TSECEP_2
+	bool "Level 2"
+
+config SPCR_TSECEP_3
+	bool "Level 3 (highest priority)"
+
+endchoice
+
+endif
+
+if ARCH_MPC8349
+
+choice
+	prompt "TSEC1 emergency priority"
+
+config SPCR_TSEC1EP_UNSET
+	bool "Don't set value"
+
+config SPCR_TSEC1EP_0
+	bool "Level 0 (lowest priority)"
+
+config SPCR_TSEC1EP_1
+	bool "Level 1"
+
+config SPCR_TSEC1EP_2
+	bool "Level 2"
+
+config SPCR_TSEC1EP_3
+	bool "Level 3 (highest priority)"
+
+endchoice
+
+choice
+	prompt "TSEC2 emergency priority"
+
+config SPCR_TSEC2EP_UNSET
+	bool "Don't set value"
+
+config SPCR_TSEC2EP_0
+	bool "Level 0 (lowest priority)"
+
+config SPCR_TSEC2EP_1
+	bool "Level 1"
+
+config SPCR_TSEC2EP_2
+	bool "Level 2"
+
+config SPCR_TSEC2EP_3
+	bool "Level 3 (highest priority)"
+
+endchoice
+
+endif
+
+config SPCR_OPT
+	hex
+	default 0x0 if SPCR_OPT_UNSET
+	default 0x0 if SPCR_OPT_NONE
+	default 0x800000 if SPCR_OPT_SPEC_READ
+
+config SPCR_TSECEP
+	hex
+	default 0x0 if SPCR_TSECEP_UNSET
+	default 0x0 if SPCR_TSECEP_0
+	default 0x100 if SPCR_TSECEP_1
+	default 0x200 if SPCR_TSECEP_2
+	default 0x300 if SPCR_TSECEP_3
+
+config SPCR_TSEC1EP
+	hex
+	default 0x0 if SPCR_TSEC1EP_UNSET
+	default 0x0 if SPCR_TSEC1EP_0
+	default 0x100 if SPCR_TSEC1EP_1
+	default 0x200 if SPCR_TSEC1EP_2
+	default 0x300 if SPCR_TSEC1EP_3
+
+config SPCR_TSEC2EP
+	hex
+	default 0x0 if SPCR_TSEC2EP_UNSET
+	default 0x0 if SPCR_TSEC2EP_0
+	default 0x1 if SPCR_TSEC2EP_1
+	default 0x2 if SPCR_TSEC2EP_2
+	default 0x3 if SPCR_TSEC2EP_3
+
+endmenu

arch/powerpc/cpu/mpc83xx/initreg/initreg.h

@@ -0,0 +1,79 @@
+#define SPCR_PCIHPE_MASK	0x10000000
+#define SPCR_PCIPR_MASK		0x03000000
+#define SPCR_OPT_MASK		0x00800000
+#define SPCR_TBEN_MASK		0x00400000
+#define SPCR_COREPR_MASK	0x00300000
+#define SPCR_TSEC1DP_MASK	0x00003000
+#define SPCR_TSEC1BDP_MASK	0x00000C00
+#define SPCR_TSEC1EP_MASK	0x00000300
+#define SPCR_TSEC2DP_MASK	0x00000030
+#define SPCR_TSEC2BDP_MASK	0x0000000C
+#define SPCR_TSEC2EP_MASK	0x00000003
+#define SPCR_TSECDP_MASK	0x00003000
+#define SPCR_TSECBDP_MASK	0x00000C00
+#define SPCR_TSECEP_MASK	0x00000300
+
+	const __be32 spcr_mask =
+#if defined(CONFIG_SPCR_OPT) && !defined(CONFIG_SPCR_OPT_UNSET)
+		SPCR_OPT_MASK |
+#endif
+#if defined(CONFIG_SPCR_TSECEP) && !defined(CONFIG_SPCR_TSECEP_UNSET)
+		SPCR_TSECEP_MASK |
+#endif
+#if defined(CONFIG_SPCR_TSEC1EP) && !defined(CONFIG_SPCR_TSEC1EP_UNSET)
+		SPCR_TSEC1EP_MASK |
+#endif
+#if defined(CONFIG_SPCR_TSEC2EP) && !defined(CONFIG_SPCR_TSEC2EP_UNSET)
+		SPCR_TSEC2EP_MASK |
+#endif
+		0;
+	const __be32 spcr_val =
+#if defined(CONFIG_SPCR_OPT) && !defined(CONFIG_SPCR_OPT_UNSET)
+		CONFIG_SPCR_OPT |
+#endif
+#if defined(CONFIG_SPCR_TSECEP) && !defined(CONFIG_SPCR_TSECEP_UNSET)
+		CONFIG_SPCR_TSECEP |
+#endif
+#if defined(CONFIG_SPCR_TSEC1EP) && !defined(CONFIG_SPCR_TSEC1EP_UNSET)
+		CONFIG_SPCR_TSEC1EP |
+#endif
+#if defined(CONFIG_SPCR_TSEC2EP) && !defined(CONFIG_SPCR_TSEC2EP_UNSET)
+		CONFIG_SPCR_TSEC2EP |
+#endif
+		0;
+
+	const __be32 lcrr_mask =
+#if defined(CONFIG_LCRR_DBYP) && !defined(CONFIG_LCRR_DBYP_UNSET)
+		LCRR_DBYP |
+#endif
+#if defined(CONFIG_LCRR_BUFCMDC) && !defined(CONFIG_LCRR_BUFCMDC_UNSET)
+		LCRR_BUFCMDC |
+#endif
+#if defined(CONFIG_LCRR_ECL) && !defined(CONFIG_LCRR_ECL_UNSET)
+		LCRR_ECL |
+#endif
+#if defined(CONFIG_LCRR_EADC) && !defined(CONFIG_LCRR_EADC_UNSET)
+		LCRR_EADC |
+#endif
+#if defined(CONFIG_LCRR_CLKDIV) && !defined(CONFIG_LCRR_CLKDIV_UNSET)
+		LCRR_CLKDIV |
+#endif
+		0;
+
+	const __be32 lcrr_val =
+#if defined(CONFIG_LCRR_DBYP) && !defined(CONFIG_LCRR_DBYP_UNSET)
+		CONFIG_LCRR_DBYP |
+#endif
+#if defined(CONFIG_LCRR_BUFCMDC) && !defined(CONFIG_LCRR_BUFCMDC_UNSET)
+		CONFIG_LCRR_BUFCMDC |
+#endif
+#if defined(CONFIG_LCRR_ECL) && !defined(CONFIG_LCRR_ECL_UNSET)
+		CONFIG_LCRR_ECL |
+#endif
+#if defined(CONFIG_LCRR_EADC) && !defined(CONFIG_LCRR_EADC_UNSET)
+		CONFIG_LCRR_EADC |
+#endif
+#if defined(CONFIG_LCRR_CLKDIV) && !defined(CONFIG_LCRR_CLKDIV_UNSET)
+		CONFIG_LCRR_CLKDIV |
+#endif
+		0;

arch/powerpc/cpu/mpc83xx/lblaw/Kconfig

@@ -0,0 +1,519 @@
+menu "LBLAW setup"
+
+choice
+	prompt "NAND LAWBAR for NAND SPL"
+
+config NAND_LBLAWBAR_PRELIM_NONE
+	bool "None"
+
+config NAND_LBLAWBAR_PRELIM_0
+	bool "0"
+	depends on LBLAW0
+
+config NAND_LBLAWBAR_PRELIM_1
+	bool "1"
+	depends on LBLAW1
+
+config NAND_LBLAWBAR_PRELIM_2
+	bool "2"
+	depends on LBLAW2
+
+config NAND_LBLAWBAR_PRELIM_3
+	bool "3"
+	depends on LBLAW3
+
+endchoice
+
+menuconfig LBLAW0
+	bool "LBLAW0"
+
+if LBLAW0
+
+config LBLAW0_ENABLE
+	bool "Window enable"
+	default "y"
+
+if !LBLAW0_ENABLE
+
+config LBLAW0_BASE
+	hex
+	default 0x0
+
+endif
+
+if LBLAW0_ENABLE
+
+config LBLAW0_NAME
+	string "Identifier"
+
+config LBLAW0_BASE
+	hex "Window base"
+
+choice
+	prompt "Window size"
+
+config LBLAW0_LENGTH_4_KBYTES
+	bool "4 kb"
+
+config LBLAW0_LENGTH_8_KBYTES
+	bool "8 kb"
+
+config LBLAW0_LENGTH_16_KBYTES
+	bool "16 kb"
+
+config LBLAW0_LENGTH_32_KBYTES
+	bool "32 kb"
+
+config LBLAW0_LENGTH_64_KBYTES
+	bool "64 kb"
+
+config LBLAW0_LENGTH_128_KBYTES
+	bool "128 kb"
+
+config LBLAW0_LENGTH_256_KBYTES
+	bool "256 kb"
+
+config LBLAW0_LENGTH_512_KBYTES
+	bool "512 kb"
+
+config LBLAW0_LENGTH_1_MBYTES
+	bool "1 mb"
+
+config LBLAW0_LENGTH_2_MBYTES
+	bool "2 mb"
+
+config LBLAW0_LENGTH_4_MBYTES
+	bool "4 mb"
+
+config LBLAW0_LENGTH_8_MBYTES
+	bool "8 mb"
+
+config LBLAW0_LENGTH_16_MBYTES
+	bool "16 mb"
+
+config LBLAW0_LENGTH_32_MBYTES
+	bool "32 mb"
+
+config LBLAW0_LENGTH_64_MBYTES
+	bool "64 mb"
+
+config LBLAW0_LENGTH_128_MBYTES
+	bool "128 mb"
+
+config LBLAW0_LENGTH_256_MBYTES
+	bool "256 mb"
+
+config LBLAW0_LENGTH_512_MBYTES
+	bool "512 mb"
+
+config LBLAW0_LENGTH_1_GBYTES
+	bool "1 gb"
+
+config LBLAW0_LENGTH_2_GBYTES
+	bool "2 gb"
+
+endchoice
+
+endif # LBLAW0_ENABLE
+
+endif # LBLAW0
+
+config LBLAW0_ENABLE_BIT
+	hex
+	default 0x0 if !LBLAW0_ENABLE
+	default 0x80000000 if LBLAW0_ENABLE
+
+config LBLAW0_LENGTH
+	hex
+	default 0x0 if !LBLAW0_ENABLE
+	default 0x0000000B if LBLAW0_LENGTH_4_KBYTES
+	default 0x0000000C if LBLAW0_LENGTH_8_KBYTES
+	default 0x0000000D if LBLAW0_LENGTH_16_KBYTES
+	default 0x0000000E if LBLAW0_LENGTH_32_KBYTES
+	default 0x0000000F if LBLAW0_LENGTH_64_KBYTES
+	default 0x00000010 if LBLAW0_LENGTH_128_KBYTES
+	default 0x00000011 if LBLAW0_LENGTH_256_KBYTES
+	default 0x00000012 if LBLAW0_LENGTH_512_KBYTES
+	default 0x00000013 if LBLAW0_LENGTH_1_MBYTES
+	default 0x00000014 if LBLAW0_LENGTH_2_MBYTES
+	default 0x00000015 if LBLAW0_LENGTH_4_MBYTES
+	default 0x00000016 if LBLAW0_LENGTH_8_MBYTES
+	default 0x00000017 if LBLAW0_LENGTH_16_MBYTES
+	default 0x00000018 if LBLAW0_LENGTH_32_MBYTES
+	default 0x00000019 if LBLAW0_LENGTH_64_MBYTES
+	default 0x0000001A if LBLAW0_LENGTH_128_MBYTES
+	default 0x0000001B if LBLAW0_LENGTH_256_MBYTES
+	default 0x0000001C if LBLAW0_LENGTH_512_MBYTES
+	default 0x0000001D if LBLAW0_LENGTH_1_GBYTES
+	default 0x0000001E if LBLAW0_LENGTH_2_GBYTES
+
+menuconfig LBLAW1
+	bool "LBLAW1"
+
+if LBLAW1
+
+config LBLAW1_ENABLE
+	bool "Window enable"
+	default "y"
+
+if !LBLAW1_ENABLE
+
+config LBLAW1_BASE
+	hex
+	default 0x0
+
+endif
+
+if LBLAW1_ENABLE
+
+config LBLAW1_NAME
+	string "Identifier"
+
+config LBLAW1_BASE
+	hex "Window base"
+
+choice
+	prompt "Window size"
+
+config LBLAW1_LENGTH_4_KBYTES
+	bool "4 kb"
+
+config LBLAW1_LENGTH_8_KBYTES
+	bool "8 kb"
+
+config LBLAW1_LENGTH_16_KBYTES
+	bool "16 kb"
+
+config LBLAW1_LENGTH_32_KBYTES
+	bool "32 kb"
+
+config LBLAW1_LENGTH_64_KBYTES
+	bool "64 kb"
+
+config LBLAW1_LENGTH_128_KBYTES
+	bool "128 kb"
+
+config LBLAW1_LENGTH_256_KBYTES
+	bool "256 kb"
+
+config LBLAW1_LENGTH_512_KBYTES
+	bool "512 kb"
+
+config LBLAW1_LENGTH_1_MBYTES
+	bool "1 mb"
+
+config LBLAW1_LENGTH_2_MBYTES
+	bool "2 mb"
+
+config LBLAW1_LENGTH_4_MBYTES
+	bool "4 mb"
+
+config LBLAW1_LENGTH_8_MBYTES
+	bool "8 mb"
+
+config LBLAW1_LENGTH_16_MBYTES
+	bool "16 mb"
+
+config LBLAW1_LENGTH_32_MBYTES
+	bool "32 mb"
+
+config LBLAW1_LENGTH_64_MBYTES
+	bool "64 mb"
+
+config LBLAW1_LENGTH_128_MBYTES
+	bool "128 mb"
+
+config LBLAW1_LENGTH_256_MBYTES
+	bool "256 mb"
+
+config LBLAW1_LENGTH_512_MBYTES
+	bool "512 mb"
+
+config LBLAW1_LENGTH_1_GBYTES
+	bool "1 gb"
+
+config LBLAW1_LENGTH_2_GBYTES
+	bool "2 gb"
+
+endchoice
+
+endif # LBLAW1_ENABLE
+
+endif # LBLAW1
+
+config LBLAW1_ENABLE_BIT
+	hex
+	default 0x0 if !LBLAW1_ENABLE
+	default 0x80000000 if LBLAW1_ENABLE
+
+config LBLAW1_LENGTH
+	hex
+	default 0x0 if !LBLAW1_ENABLE
+	default 0x0000000B if LBLAW1_LENGTH_4_KBYTES
+	default 0x0000000C if LBLAW1_LENGTH_8_KBYTES
+	default 0x0000000D if LBLAW1_LENGTH_16_KBYTES
+	default 0x0000000E if LBLAW1_LENGTH_32_KBYTES
+	default 0x0000000F if LBLAW1_LENGTH_64_KBYTES
+	default 0x00000010 if LBLAW1_LENGTH_128_KBYTES
+	default 0x00000011 if LBLAW1_LENGTH_256_KBYTES
+	default 0x00000012 if LBLAW1_LENGTH_512_KBYTES
+	default 0x00000013 if LBLAW1_LENGTH_1_MBYTES
+	default 0x00000014 if LBLAW1_LENGTH_2_MBYTES
+	default 0x00000015 if LBLAW1_LENGTH_4_MBYTES
+	default 0x00000016 if LBLAW1_LENGTH_8_MBYTES
+	default 0x00000017 if LBLAW1_LENGTH_16_MBYTES
+	default 0x00000018 if LBLAW1_LENGTH_32_MBYTES
+	default 0x00000019 if LBLAW1_LENGTH_64_MBYTES
+	default 0x0000001A if LBLAW1_LENGTH_128_MBYTES
+	default 0x0000001B if LBLAW1_LENGTH_256_MBYTES
+	default 0x0000001C if LBLAW1_LENGTH_512_MBYTES
+	default 0x0000001D if LBLAW1_LENGTH_1_GBYTES
+	default 0x0000001E if LBLAW1_LENGTH_2_GBYTES
+
+menuconfig LBLAW2
+	bool "LBLAW2"
+
+if LBLAW2
+
+config LBLAW2_ENABLE
+	bool "Window enable"
+	default "y"
+
+if !LBLAW2_ENABLE
+
+config LBLAW2_BASE
+	hex
+	default 0x0
+
+endif
+
+if LBLAW2_ENABLE
+
+config LBLAW2_NAME
+	string "Identifier"
+
+config LBLAW2_BASE
+	hex "Window base"
+
+choice
+	prompt "Window size"
+
+config LBLAW2_LENGTH_4_KBYTES
+	bool "4 kb"
+
+config LBLAW2_LENGTH_8_KBYTES
+	bool "8 kb"
+
+config LBLAW2_LENGTH_16_KBYTES
+	bool "16 kb"
+
+config LBLAW2_LENGTH_32_KBYTES
+	bool "32 kb"
+
+config LBLAW2_LENGTH_64_KBYTES
+	bool "64 kb"
+
+config LBLAW2_LENGTH_128_KBYTES
+	bool "128 kb"
+
+config LBLAW2_LENGTH_256_KBYTES
+	bool "256 kb"
+
+config LBLAW2_LENGTH_512_KBYTES
+	bool "512 kb"
+
+config LBLAW2_LENGTH_1_MBYTES
+	bool "1 mb"
+
+config LBLAW2_LENGTH_2_MBYTES
+	bool "2 mb"
+
+config LBLAW2_LENGTH_4_MBYTES
+	bool "4 mb"
+
+config LBLAW2_LENGTH_8_MBYTES
+	bool "8 mb"
+
+config LBLAW2_LENGTH_16_MBYTES
+	bool "16 mb"
+
+config LBLAW2_LENGTH_32_MBYTES
+	bool "32 mb"
+
+config LBLAW2_LENGTH_64_MBYTES
+	bool "64 mb"
+
+config LBLAW2_LENGTH_128_MBYTES
+	bool "128 mb"
+
+config LBLAW2_LENGTH_256_MBYTES
+	bool "256 mb"
+
+config LBLAW2_LENGTH_512_MBYTES
+	bool "512 mb"
+
+config LBLAW2_LENGTH_1_GBYTES
+	bool "1 gb"
+
+config LBLAW2_LENGTH_2_GBYTES
+	bool "2 gb"
+
+endchoice
+
+endif # LBLAW2_ENABLE
+
+endif # LBLAW2
+
+config LBLAW2_ENABLE_BIT
+	hex
+	default 0x0 if !LBLAW2_ENABLE
+	default 0x80000000 if LBLAW2_ENABLE
+
+config LBLAW2_LENGTH
+	hex
+	default 0x0 if !LBLAW2_ENABLE
+	default 0x0000000B if LBLAW2_LENGTH_4_KBYTES
+	default 0x0000000C if LBLAW2_LENGTH_8_KBYTES
+	default 0x0000000D if LBLAW2_LENGTH_16_KBYTES
+	default 0x0000000E if LBLAW2_LENGTH_32_KBYTES
+	default 0x0000000F if LBLAW2_LENGTH_64_KBYTES
+	default 0x00000010 if LBLAW2_LENGTH_128_KBYTES
+	default 0x00000011 if LBLAW2_LENGTH_256_KBYTES
+	default 0x00000012 if LBLAW2_LENGTH_512_KBYTES
+	default 0x00000013 if LBLAW2_LENGTH_1_MBYTES
+	default 0x00000014 if LBLAW2_LENGTH_2_MBYTES
+	default 0x00000015 if LBLAW2_LENGTH_4_MBYTES
+	default 0x00000016 if LBLAW2_LENGTH_8_MBYTES
+	default 0x00000017 if LBLAW2_LENGTH_16_MBYTES
+	default 0x00000018 if LBLAW2_LENGTH_32_MBYTES
+	default 0x00000019 if LBLAW2_LENGTH_64_MBYTES
+	default 0x0000001A if LBLAW2_LENGTH_128_MBYTES
+	default 0x0000001B if LBLAW2_LENGTH_256_MBYTES
+	default 0x0000001C if LBLAW2_LENGTH_512_MBYTES
+	default 0x0000001D if LBLAW2_LENGTH_1_GBYTES
+	default 0x0000001E if LBLAW2_LENGTH_2_GBYTES
+
+menuconfig LBLAW3
+	bool "LBLAW3"
+
+if LBLAW3
+
+config LBLAW3_ENABLE
+	bool "Window enable"
+	default "y"
+
+if !LBLAW3_ENABLE
+
+config LBLAW3_BASE
+	hex
+	default 0x0
+
+endif
+
+if LBLAW3_ENABLE
+
+config LBLAW3_NAME
+	string "Identifier"
+
+config LBLAW3_BASE
+	hex "Window base"
+
+choice
+	prompt "Window size"
+
+config LBLAW3_LENGTH_4_KBYTES
+	bool "4 kb"
+
+config LBLAW3_LENGTH_8_KBYTES
+	bool "8 kb"
+
+config LBLAW3_LENGTH_16_KBYTES
+	bool "16 kb"
+
+config LBLAW3_LENGTH_32_KBYTES
+	bool "32 kb"
+
+config LBLAW3_LENGTH_64_KBYTES
+	bool "64 kb"
+
+config LBLAW3_LENGTH_128_KBYTES
+	bool "128 kb"
+
+config LBLAW3_LENGTH_256_KBYTES
+	bool "256 kb"
+
+config LBLAW3_LENGTH_512_KBYTES
+	bool "512 kb"
+
+config LBLAW3_LENGTH_1_MBYTES
+	bool "1 mb"
+
+config LBLAW3_LENGTH_2_MBYTES
+	bool "2 mb"
+
+config LBLAW3_LENGTH_4_MBYTES
+	bool "4 mb"
+
+config LBLAW3_LENGTH_8_MBYTES
+	bool "8 mb"
+
+config LBLAW3_LENGTH_16_MBYTES
+	bool "16 mb"
+
+config LBLAW3_LENGTH_32_MBYTES
+	bool "32 mb"
+
+config LBLAW3_LENGTH_64_MBYTES
+	bool "64 mb"
+
+config LBLAW3_LENGTH_128_MBYTES
+	bool "128 mb"
+
+config LBLAW3_LENGTH_256_MBYTES
+	bool "256 mb"
+
+config LBLAW3_LENGTH_512_MBYTES
+	bool "512 mb"
+
+config LBLAW3_LENGTH_1_GBYTES
+	bool "1 gb"
+
+config LBLAW3_LENGTH_2_GBYTES
+	bool "2 gb"
+
+endchoice
+
+endif # LBLAW3_ENABLE
+
+endif # LBLAW3
+
+config LBLAW3_ENABLE_BIT
+	hex
+	default 0x0 if !LBLAW3_ENABLE
+	default 0x80000000 if LBLAW3_ENABLE
+
+config LBLAW3_LENGTH
+	hex
+	default 0x0 if !LBLAW3_ENABLE
+	default 0x0000000B if LBLAW3_LENGTH_4_KBYTES
+	default 0x0000000C if LBLAW3_LENGTH_8_KBYTES
+	default 0x0000000D if LBLAW3_LENGTH_16_KBYTES
+	default 0x0000000E if LBLAW3_LENGTH_32_KBYTES
+	default 0x0000000F if LBLAW3_LENGTH_64_KBYTES
+	default 0x00000010 if LBLAW3_LENGTH_128_KBYTES
+	default 0x00000011 if LBLAW3_LENGTH_256_KBYTES
+	default 0x00000012 if LBLAW3_LENGTH_512_KBYTES
+	default 0x00000013 if LBLAW3_LENGTH_1_MBYTES
+	default 0x00000014 if LBLAW3_LENGTH_2_MBYTES
+	default 0x00000015 if LBLAW3_LENGTH_4_MBYTES
+	default 0x00000016 if LBLAW3_LENGTH_8_MBYTES
+	default 0x00000017 if LBLAW3_LENGTH_16_MBYTES
+	default 0x00000018 if LBLAW3_LENGTH_32_MBYTES
+	default 0x00000019 if LBLAW3_LENGTH_64_MBYTES
+	default 0x0000001A if LBLAW3_LENGTH_128_MBYTES
+	default 0x0000001B if LBLAW3_LENGTH_256_MBYTES
+	default 0x0000001C if LBLAW3_LENGTH_512_MBYTES
+	default 0x0000001D if LBLAW3_LENGTH_1_GBYTES
+	default 0x0000001E if LBLAW3_LENGTH_2_GBYTES
+
+endmenu

arch/powerpc/cpu/mpc83xx/lblaw/lblaw.h

@@ -0,0 +1,55 @@
+#if defined(CONFIG_LBLAW0)
+#define CONFIG_SYS_LBLAWBAR0_PRELIM \
+	CONFIG_LBLAW0_BASE
+#define CONFIG_SYS_LBLAWAR0_PRELIM (\
+	CONFIG_LBLAW0_ENABLE_BIT |\
+	CONFIG_LBLAW0_LENGTH \
+)
+#endif
+
+#if defined(CONFIG_LBLAW1)
+#define CONFIG_SYS_LBLAWBAR1_PRELIM \
+	CONFIG_LBLAW1_BASE
+#define CONFIG_SYS_LBLAWAR1_PRELIM (\
+	CONFIG_LBLAW1_ENABLE_BIT |\
+	CONFIG_LBLAW1_LENGTH \
+)
+#endif
+
+#if defined(CONFIG_LBLAW2)
+#define CONFIG_SYS_LBLAWBAR2_PRELIM \
+	CONFIG_LBLAW2_BASE
+#define CONFIG_SYS_LBLAWAR2_PRELIM (\
+	CONFIG_LBLAW2_ENABLE_BIT |\
+	CONFIG_LBLAW2_LENGTH \
+)
+#endif
+
+#if defined(CONFIG_LBLAW3)
+#define CONFIG_SYS_LBLAWBAR3_PRELIM \
+	CONFIG_LBLAW3_BASE
+#define CONFIG_SYS_LBLAWAR3_PRELIM (\
+	CONFIG_LBLAW3_ENABLE_BIT |\
+	CONFIG_LBLAW3_LENGTH \
+)
+#endif
+
+#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_0
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR0_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR0_PRELIM
+#endif
+
+#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_1
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
+#endif
+
+#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_2
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR2_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR2_PRELIM
+#endif
+
+#ifdef CONFIG_NAND_LBLAWBAR_PRELIM_3
+#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR3_PRELIM
+#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR3_PRELIM
+#endif

arch/powerpc/cpu/mpc83xx/pcie.c

@@ -174,6 +174,41 @@ static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
 
 #endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */
 
+int get_pcie_clk(int index)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u32 pci_sync_in;
+	u8 spmf;
+	u8 clkin_div;
+	u32 sccr;
+	u32 csb_clk;
+	u32 testval;
+
+	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
+	sccr = im->clk.sccr;
+	pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div);
+	spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT;
+	csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
+
+	if (index)
+		testval = (sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT;
+	else
+		testval = (sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT;
+
+	switch (testval) {
+	case 0:
+		return 0;
+	case 1:
+		return csb_clk;
+	case 2:
+		return csb_clk / 2;
+	case 3:
+		return csb_clk / 3;
+	}
+
+	return 0;
+}
+
 static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
 {
 	immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
@@ -269,11 +304,9 @@ static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
 	/* Hose configure header is memory-mapped */
 	hose_cfg_base = (void *)pex;
 
-	get_clocks();
 	/* Configure the PCIE controller core clock ratio */
 	out_le32(hose_cfg_base + PEX_GCLK_RATIO,
-		(((bus ? gd->arch.pciexp2_clk : gd->arch.pciexp1_clk)
-			/ 1000000) * 16) / 333);
+		((get_pcie_clk(bus) / 1000000) * 16) / 333);
 	udelay(1000000);
 
 	/* Do Type 1 bridge configuration */

arch/powerpc/cpu/mpc83xx/spd_sdram.c

@@ -31,7 +31,7 @@ void board_add_ram_info(int use_default)
 	printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
 			   >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
 
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X)
 	if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_16)
 		puts(", 16-bit");
 	else if ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) == SDRAM_CFG_DBW_32)
@@ -281,7 +281,7 @@ long int spd_sdram()
 	/*
 	 * Set up LAWBAR for all of DDR.
 	 */
-	ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
+	ecm->bar = CONFIG_SYS_SDRAM_BASE & 0xfffff000;
 	ecm->ar  = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
 	debug("DDR:bar=0x%08x\n", ecm->bar);
 	debug("DDR:ar=0x%08x\n", ecm->ar);
@@ -426,7 +426,7 @@ long int spd_sdram()
 
 	/*
 	 * Errata DDR6 work around: input enable 2 cycles earlier.
-	 * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
+	 * including MPC834X Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
 	 */
 	if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
 		if (caslat == 2)
@@ -436,7 +436,7 @@ long int spd_sdram()
 		else if (caslat == 4)
 			ddr->debug_reg = 0x202c0000; /* CL=3.0 */
 
-		__asm__ __volatile__ ("sync");
+		sync();
 
 		debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
 	}
@@ -765,7 +765,8 @@ long int spd_sdram()
 #endif
 	debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
 
-	asm("sync;isync");
+	sync();
+	isync();
 
 	udelay(600);
 
@@ -834,7 +835,8 @@ long int spd_sdram()
 #endif
 	/* Enable controller, and GO! */
 	ddr->sdram_cfg = sdram_cfg;
-	asm("sync;isync");
+	sync();
+	isync();
 	udelay(500);
 
 	debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
@@ -843,6 +845,22 @@ long int spd_sdram()
 #endif /* CONFIG_SPD_EEPROM */
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+static inline u32 mftbu(void)
+{
+	u32 rval;
+
+	asm volatile("mftbu %0" : "=r" (rval));
+	return rval;
+}
+
+static inline u32 mftb(void)
+{
+	u32 rval;
+
+	asm volatile("mftb %0" : "=r" (rval));
+	return rval;
+}
+
 /*
  * Use timebase counter, get_timer() is not available
  * at this point of initialization yet.
@@ -858,9 +876,9 @@ static __inline__ unsigned long get_tbms (void)
 
 	/* get the timebase ticks */
 	do {
-		asm volatile ("mftbu %0":"=r" (tbu1):);
-		asm volatile ("mftb %0":"=r" (tbl):);
-		asm volatile ("mftbu %0":"=r" (tbu2):);
+		tbu1 = mftbu();
+		tbl = mftb();
+		tbu2 = mftbu();
 	} while (tbu1 != tbu2);
 
 	/* convert ticks to ms */
@@ -897,7 +915,7 @@ void ddr_enable_ecc(unsigned int dram_size)
 	for (p = 0; p < (u64*)(size); p++) {
 		ppcDWstore((u32*)p, pattern);
 	}
-	__asm__ __volatile__ ("sync");
+	sync();
 #endif
 
 	t_end = get_tbms();
@@ -922,8 +940,8 @@ void ddr_enable_ecc(unsigned int dram_size)
 	/* Enable errors for ECC */
 	ddr->err_disable &= ECC_ERROR_ENABLE;
 
-	__asm__ __volatile__ ("sync");
-	__asm__ __volatile__ ("isync");
+	sync();
+	isync();
 }
 #endif	/* CONFIG_DDR_ECC */
 

arch/powerpc/cpu/mpc83xx/speed.c

@@ -85,35 +85,35 @@ int get_clocks(void)
 	u32 lcrr;
 
 	u32 csb_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
-#elif defined(CONFIG_MPC8309)
+#elif defined(CONFIG_ARCH_MPC8309)
 	u32 usbdr_clk;
 #endif
-#ifdef CONFIG_MPC834x
+#ifdef CONFIG_ARCH_MPC834X
 	u32 usbmph_clk;
 #endif
 	u32 core_clk;
 	u32 i2c1_clk;
-#if !defined(CONFIG_MPC832x)
+#if !defined(CONFIG_ARCH_MPC832X)
 	u32 i2c2_clk;
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	u32 tdm_clk;
 #endif
 #if defined(CONFIG_FSL_ESDHC)
 	u32 sdhc_clk;
 #endif
-#if !defined(CONFIG_MPC8309)
+#if !defined(CONFIG_ARCH_MPC8309)
 	u32 enc_clk;
 #endif
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 mem_clk;
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_ARCH_MPC8360)
 	u32 mem_sec_clk;
 #endif
 #if defined(CONFIG_QE)
@@ -122,12 +122,12 @@ int get_clocks(void)
 	u32 qe_clk;
 	u32 brg_clk;
 #endif
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC837X)
 	u32 pciexp1_clk;
 	u32 pciexp2_clk;
 #endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
 	u32 sata_clk;
 #endif
 
@@ -137,8 +137,8 @@ int get_clocks(void)
 	clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
 
 	if (im->reset.rcwh & HRCWH_PCI_HOST) {
-#if defined(CONFIG_83XX_CLKIN)
-		pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
+#if defined(CONFIG_SYS_CLK_FREQ)
+		pci_sync_in = CONFIG_SYS_CLK_FREQ / (1 + clkin_div);
 #else
 		pci_sync_in = 0xDEADBEEF;
 #endif
@@ -155,8 +155,8 @@ int get_clocks(void)
 
 	sccr = im->clk.sccr;
 
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 	switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
 	case 0:
 		tsec1_clk = 0;
@@ -176,8 +176,8 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC830X) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 	switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
 	case 0:
 		usbdr_clk = 0;
@@ -197,8 +197,8 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315) || \
-	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC8315) || \
+	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 	switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
 	case 0:
 		tsec2_clk = 0;
@@ -216,7 +216,7 @@ int get_clocks(void)
 		/* unknown SCCR_TSEC2CM value */
 		return -4;
 	}
-#elif defined(CONFIG_MPC8313)
+#elif defined(CONFIG_ARCH_MPC8313)
 	tsec2_clk = tsec1_clk;
 
 	if (!(sccr & SCCR_TSEC1ON))
@@ -225,7 +225,7 @@ int get_clocks(void)
 		tsec2_clk = 0;
 #endif
 
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
 	switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
 	case 0:
 		usbmph_clk = 0;
@@ -252,7 +252,7 @@ int get_clocks(void)
 		return -6;
 	}
 #endif
-#if !defined(CONFIG_MPC8309)
+#if !defined(CONFIG_ARCH_MPC8309)
 	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
 	case 0:
 		enc_clk = 0;
@@ -291,7 +291,7 @@ int get_clocks(void)
 		return -8;
 	}
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
 	case 0:
 		tdm_clk = 0;
@@ -311,27 +311,27 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
 	i2c1_clk = tsec2_clk;
-#elif defined(CONFIG_MPC8360)
+#elif defined(CONFIG_ARCH_MPC8360)
 	i2c1_clk = csb_clk;
-#elif defined(CONFIG_MPC832x)
+#elif defined(CONFIG_ARCH_MPC832X)
 	i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x)
+#elif defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X)
 	i2c1_clk = enc_clk;
 #elif defined(CONFIG_FSL_ESDHC)
 	i2c1_clk = sdhc_clk;
-#elif defined(CONFIG_MPC837x)
+#elif defined(CONFIG_ARCH_MPC837X)
 	i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC8309)
+#elif defined(CONFIG_ARCH_MPC8309)
 	i2c1_clk = csb_clk;
 #endif
-#if !defined(CONFIG_MPC832x)
+#if !defined(CONFIG_ARCH_MPC832X)
 	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
 #endif
 
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC837X)
 	switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
 	case 0:
 		pciexp1_clk = 0;
@@ -369,7 +369,7 @@ int get_clocks(void)
 	}
 #endif
 
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
 	switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
 	case 0:
 		sata_clk = 0;
@@ -407,7 +407,7 @@ int get_clocks(void)
 		  (1 + ((im->clk.spmr & SPMR_DDRCM) >> SPMR_DDRCM_SHIFT));
 	corepll = (im->clk.spmr & SPMR_COREPLL) >> SPMR_COREPLL_SHIFT;
 
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_ARCH_MPC8360)
 	mem_sec_clk = csb_clk * (1 +
 		       ((im->clk.spmr & SPMR_LBIUCM) >> SPMR_LBIUCM_SHIFT));
 #endif
@@ -448,18 +448,18 @@ int get_clocks(void)
 #endif
 
 	gd->arch.csb_clk = csb_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 	gd->arch.tsec1_clk = tsec1_clk;
 	gd->arch.tsec2_clk = tsec2_clk;
 	gd->arch.usbdr_clk = usbdr_clk;
-#elif defined(CONFIG_MPC8309)
+#elif defined(CONFIG_ARCH_MPC8309)
 	gd->arch.usbdr_clk = usbdr_clk;
 #endif
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
 	gd->arch.usbmph_clk = usbmph_clk;
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	gd->arch.tdm_clk = tdm_clk;
 #endif
 #if defined(CONFIG_FSL_ESDHC)
@@ -467,28 +467,28 @@ int get_clocks(void)
 #endif
 	gd->arch.core_clk = core_clk;
 	gd->arch.i2c1_clk = i2c1_clk;
-#if !defined(CONFIG_MPC832x)
+#if !defined(CONFIG_ARCH_MPC832X)
 	gd->arch.i2c2_clk = i2c2_clk;
 #endif
-#if !defined(CONFIG_MPC8309)
+#if !defined(CONFIG_ARCH_MPC8309)
 	gd->arch.enc_clk = enc_clk;
 #endif
 	gd->arch.lbiu_clk = lbiu_clk;
 	gd->arch.lclk_clk = lclk_clk;
 	gd->mem_clk = mem_clk;
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_ARCH_MPC8360)
 	gd->arch.mem_sec_clk = mem_sec_clk;
 #endif
 #if defined(CONFIG_QE)
 	gd->arch.qe_clk = qe_clk;
 	gd->arch.brg_clk = brg_clk;
 #endif
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC837X)
 	gd->arch.pciexp1_clk = pciexp1_clk;
 	gd->arch.pciexp2_clk = pciexp2_clk;
 #endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
 	gd->arch.sata_clk = sata_clk;
 #endif
 	gd->pci_clk = pci_sync_in;
@@ -516,6 +516,11 @@ ulong get_ddr_freq(ulong dummy)
 	return gd->mem_clk;
 }
 
+int get_serial_clock(void)
+{
+	return get_bus_freq(0);
+}
+
 static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	char buf[32];
@@ -536,21 +541,21 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("  Local Bus:           %-4s MHz\n",
 	       strmhz(buf, gd->arch.lclk_clk));
 	printf("  DDR:                 %-4s MHz\n", strmhz(buf, gd->mem_clk));
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_ARCH_MPC8360)
 	printf("  DDR Secondary:       %-4s MHz\n",
 	       strmhz(buf, gd->arch.mem_sec_clk));
 #endif
-#if !defined(CONFIG_MPC8309)
+#if !defined(CONFIG_ARCH_MPC8309)
 	printf("  SEC:                 %-4s MHz\n",
 	       strmhz(buf, gd->arch.enc_clk));
 #endif
 	printf("  I2C1:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.i2c1_clk));
-#if !defined(CONFIG_MPC832x)
+#if !defined(CONFIG_ARCH_MPC832X)
 	printf("  I2C2:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.i2c2_clk));
 #endif
-#if defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8315)
 	printf("  TDM:                 %-4s MHz\n",
 	       strmhz(buf, gd->arch.tdm_clk));
 #endif
@@ -558,30 +563,30 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("  SDHC:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.sdhc_clk));
 #endif
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 	printf("  TSEC1:               %-4s MHz\n",
 	       strmhz(buf, gd->arch.tsec1_clk));
 	printf("  TSEC2:               %-4s MHz\n",
 	       strmhz(buf, gd->arch.tsec2_clk));
 	printf("  USB DR:              %-4s MHz\n",
 	       strmhz(buf, gd->arch.usbdr_clk));
-#elif defined(CONFIG_MPC8309)
+#elif defined(CONFIG_ARCH_MPC8309)
 	printf("  USB DR:              %-4s MHz\n",
 	       strmhz(buf, gd->arch.usbdr_clk));
 #endif
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
 	printf("  USB MPH:             %-4s MHz\n",
 	       strmhz(buf, gd->arch.usbmph_clk));
 #endif
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC837X)
 	printf("  PCIEXP1:             %-4s MHz\n",
 	       strmhz(buf, gd->arch.pciexp1_clk));
 	printf("  PCIEXP2:             %-4s MHz\n",
 	       strmhz(buf, gd->arch.pciexp2_clk));
 #endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
 	printf("  SATA:                %-4s MHz\n",
 	       strmhz(buf, gd->arch.sata_clk));
 #endif

arch/powerpc/cpu/mpc83xx/spl_minimal.c

@@ -6,6 +6,9 @@
 #include <common.h>
 #include <mpc83xx.h>
 
+#include "lblaw/lblaw.h"
+#include "elbc/elbc.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 /*
@@ -24,16 +27,16 @@ void cpu_init_f (volatile immap_t * im)
 
 	/* system performance tweaking */
 
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
+#ifndef CONFIG_ACR_PIPE_DEP_UNSET
 	/* Arbiter pipeline depth */
 	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
-			  (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
+			  CONFIG_ACR_PIPE_DEP;
 #endif
 
-#ifdef CONFIG_SYS_ACR_RPTCNT
+#ifndef CONFIG_ACR_RPTCNT_UNSET
 	/* Arbiter repeat count */
 	im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
-			  (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
+			  CONFIG_ACR_RPTCNT;
 #endif
 
 #ifdef CONFIG_SYS_SPCR_OPT
@@ -89,3 +92,11 @@ void puts(const char *str)
 	while (*str)
 		putc(*str++);
 }
+
+ulong get_bus_freq(ulong dummy)
+{
+	volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+	u8 spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT;
+
+	return CONFIG_SYS_CLK_FREQ * spmf;
+}

arch/powerpc/cpu/mpc83xx/start.S

@@ -24,6 +24,10 @@
 #include <asm/mmu.h>
 #include <asm/u-boot.h>
 
+#include "hrcw/hrcw.h"
+#include "bats/bats.h"
+#include "hid/hid.h"
+
 /* We don't want the  MMU yet.
  */
 #undef	MSR_KERNEL
@@ -115,18 +119,6 @@ disable_addr_trans:
 	mtspr	SRR1, r3
 	rfi
 
-	.globl	ppcDWstore
-ppcDWstore:
-	lfd	1, 0(r4)
-	stfd	1, 0(r3)
-	blr
-
-	.globl	ppcDWload
-ppcDWload:
-	lfd	1, 0(r3)
-	stfd	1, 0(r4)
-	blr
-
 #ifndef CONFIG_DEFAULT_IMMR
 #error CONFIG_DEFAULT_IMMR must be defined
 #endif /* CONFIG_DEFAULT_IMMR */

arch/powerpc/cpu/mpc83xx/sysio/Kconfig

@@ -0,0 +1,7 @@
+menu "System I/O configuration"
+
+if ARCH_MPC8308
+source "arch/powerpc/cpu/mpc83xx/sysio/Kconfig.mpc8308"
+endif
+
+endmenu

arch/powerpc/cpu/mpc83xx/sysio/Kconfig.mpc8308

@@ -0,0 +1,323 @@
+choice
+	prompt "SPI group"
+
+config SICR_SPI_SPI
+	bool "SPI"
+
+config SICR_SPI_MSRCID
+	bool "MSRCID"
+
+config SICR_SPI_LSRCID
+	bool "LSRCID"
+
+endchoice
+
+choice
+	prompt "UART group"
+
+config SICR_UART_SPI
+	bool "UART"
+
+config SICR_UART_MSRCID
+	bool "MSRCID"
+
+config SICR_UART_LSRCID
+	bool "LSRCID"
+
+endchoice
+
+choice
+	prompt "IRQ group"
+
+config SICR_IRQ_SPI
+	bool "IRQ"
+
+config SICR_IRQ_MCP_CKSTOP
+	bool "MCP/CKSTOP"
+
+config SICR_IRQ_INTA
+	bool "INTA"
+
+endchoice
+
+choice
+	prompt "I2C2 group"
+
+config SICR_I2C2_I2C
+	bool "IRQ"
+
+config SICR_I2C2_CKSTOP
+	bool "CKSTOP"
+
+endchoice
+
+choice
+	prompt "ETSEC1 A group"
+
+config SICR_ETSEC1_A_TSEC2
+	bool "TSEC1"
+
+config SICR_ETSEC1_A_TSEC_GTX_CLK125
+	bool "TSEC1 GTX_CLK125"
+
+endchoice
+
+choice
+	prompt "eSDHC A group"
+
+config SICR_ESDHC_A_SD
+	bool "SD"
+
+config SICR_ESDHC_A_GTM
+	bool "GTM"
+
+config SICR_ESDHC_A_GPIO
+	bool "GPIO"
+
+endchoice
+
+choice
+	prompt "eSDHC B group"
+
+config SICR_ESDHC_B_SD
+	bool "SD"
+
+config SICR_ESDHC_B_GTM
+	bool "GTM"
+
+config SICR_ESDHC_B_GPIO
+	bool "GPIO"
+
+endchoice
+
+choice
+	prompt "eSDHC C group"
+
+config SICR_ESDHC_C_SD
+	bool "SD"
+
+config SICR_ESDHC_C_GTM
+	bool "GTM"
+
+config SICR_ESDHC_C_GPIO
+	bool "GPIO"
+
+endchoice
+
+choice
+	prompt "GPIO A group"
+
+config SICR_GPIO_A_GPIO
+	bool "GPIO"
+
+config SICR_GPIO_A_TSEC2
+	bool "TSEC2"
+
+endchoice
+
+choice
+	prompt "GPIO B group"
+
+config SICR_GPIO_B_GPIO
+	bool "GPIO"
+
+config SICR_GPIO_B_TSEC2
+	bool "TSEC2"
+
+config SICR_GPIO_B_TSEC_GTX_CLK125
+	bool "TSEC2 GTX_CLK125"
+
+endchoice
+
+choice
+	prompt "IEEE1588 A group"
+
+config SICR_IEEE1588_A_TSEC
+	bool "TSEC"
+
+config SICR_IEEE1588_A_GPIO
+	bool "GPIO"
+
+endchoice
+
+choice
+	prompt "USB group"
+
+config SICR_USB_TSEC
+	bool "USB"
+
+endchoice
+
+choice
+	prompt "GTM group"
+
+config SICR_GTM_TSEC
+	bool "GTM"
+
+config SICR_GTM_GPIO
+	bool "GPIO"
+
+endchoice
+
+choice
+	prompt "IEEE1588 B group"
+
+config SICR_IEEE1588_B_GPIO
+	bool "GPIO"
+
+endchoice
+
+choice
+	prompt "ETSEC2 group"
+
+config SICR_ETSEC2_TSEC2
+	bool "TSEC2"
+
+config SICR_ETSEC2_GPIO
+	bool "GPIO"
+
+endchoice
+
+choice
+	prompt "GPIO selection"
+
+config SICR_GPIOSEL_GPIO
+	bool "GPIO_A, GPIO_B"
+
+config SICR_GPIOSEL_IEEE1588
+	bool "IEEE1588_A, IEEE1588_B, ETSEC2"
+
+endchoice
+
+choice
+	prompt "IEEE1588 timer output buffer impedance"
+
+config SICR_TMROBI_3_3_V
+	bool "40 Ohm, 3.3V"
+
+config SICR_TMROBI_2_5_V
+	bool "40 Ohm, 2.5V"
+
+endchoice
+
+choice
+	prompt "TSEC1 output buffer impedance"
+
+config SICR_TMSOBI1_3_3_V
+	bool "40 Ohm, 3.3V"
+
+config SICR_TMSOBI1_2_5_V
+	bool "40 Ohm, 2.5V"
+
+endchoice
+
+choice
+	prompt "TSEC2 output buffer impedance"
+
+config SICR_TMSOBI2_3_3_V
+	bool "40 Ohm, 3.3V"
+
+config SICR_TMSOBI2_2_5_V
+	bool "40 Ohm, 2.5V"
+
+endchoice
+
+config SICRL_SPI
+	hex
+	default 0x0 if SICR_SPI_SPI
+	default 0x10000000 if SICR_SPI_MSRCID
+	default 0x30000000 if SICR_SPI_LSRCID
+
+config SICRL_UART
+	hex
+	default 0x0 if SICR_UART_SPI
+	default 0x4000000 if SICR_UART_MSRCID
+	default 0xc000000 if SICR_UART_LSRCID
+
+config SICRL_IRQ
+	hex
+	default 0x0 if SICR_IRQ_SPI
+	default 0x1000000 if SICR_IRQ_MCP_CKSTOP
+	default 0x3000000 if SICR_IRQ_INTA
+
+config SICRL_I2C2
+	hex
+	default 0x0 if SICR_I2C2_I2C
+	default 0x100000 if SICR_I2C2_CKSTOP
+
+config SICRL_ETSEC1_A
+	hex
+	default 0x0 if SICR_ETSEC1_A_TSEC2
+	default 0x40 if SICR_ETSEC1_A_TSEC_GTX_CLK125
+
+config SICRH_ESDHC_A
+	hex
+	default 0x0 if SICR_ESDHC_A_SD
+	default 0x40000000 if SICR_ESDHC_A_GTM
+	default 0xc0000000 if SICR_ESDHC_A_GPIO
+
+config SICRH_ESDHC_B
+	hex
+	default 0x0 if SICR_ESDHC_B_SD
+	default 0x10000000 if SICR_ESDHC_B_GTM
+	default 0x30000000 if SICR_ESDHC_B_GPIO
+
+config SICRH_ESDHC_C
+	hex
+	default 0x0 if SICR_ESDHC_C_SD
+	default 0x4000000 if SICR_ESDHC_C_GTM
+	default 0xc000000 if SICR_ESDHC_C_GPIO
+
+config SICRH_GPIO_A
+	hex
+	default 0x0 if SICR_GPIO_A_GPIO
+	default 0x1000000 if SICR_GPIO_A_TSEC2
+
+config SICRH_GPIO_B
+	hex
+	default 0x0 if SICR_GPIO_B_GPIO
+	default 0x400000 if SICR_GPIO_B_TSEC2
+	default 0x800000 if SICR_GPIO_B_TSEC_GTX_CLK125
+
+config SICRH_IEEE1588_A
+	hex
+	default 0x100000 if SICR_IEEE1588_A_TSEC
+	default 0x300000 if SICR_IEEE1588_A_GPIO
+
+config SICRH_USB
+	hex
+	default 0x40000 if SICR_USB_TSEC
+
+config SICRH_GTM
+	hex
+	default 0x10000 if SICR_GTM_TSEC
+	default 0x30000 if SICR_GTM_GPIO
+
+config SICRH_IEEE1588_B
+	hex
+	default 0xc000 if SICR_IEEE1588_B_GPIO
+
+config SICRH_ETSEC2
+	hex
+	default 0x1000 if SICR_ETSEC2_TSEC2
+	default 0x3000 if SICR_ETSEC2_GPIO
+
+config SICRH_GPIOSEL
+	hex
+	default 0x0 if SICR_GPIOSEL_GPIO
+	default 0x100 if SICR_GPIOSEL_IEEE1588
+
+config SICRH_TMROBI
+	hex
+	default 0x0 if SICR_TMROBI_3_3_V
+	default 0x10 if SICR_TMROBI_2_5_V
+
+config SICRH_TMSOBI1
+	hex
+	default 0x0 if SICR_TMSOBI1_3_3_V
+	default 0x2 if SICR_TMSOBI1_2_5_V
+
+config SICRH_TMSOBI2
+	hex
+	default 0x0 if SICR_TMSOBI2_3_3_V
+	default 0x1 if SICR_TMSOBI2_2_5_V

arch/powerpc/cpu/mpc83xx/sysio/sysio.h

@@ -0,0 +1,32 @@
+#ifdef CONFIG_ARCH_MPC8308
+
+#ifndef CONFIG_SYS_SICRL
+#define CONFIG_SYS_SICRL (\
+	CONFIG_SICRL_SPI |\
+	CONFIG_SICRL_UART |\
+	CONFIG_SICRL_IRQ |\
+	CONFIG_SICRL_I2C2 |\
+	CONFIG_SICRL_ETSEC1_A \
+)
+#endif
+
+#ifndef CONFIG_SYS_SICRH
+#define CONFIG_SYS_SICRH (\
+	CONFIG_SICRH_ESDHC_A |\
+	CONFIG_SICRH_ESDHC_B |\
+	CONFIG_SICRH_ESDHC_C |\
+	CONFIG_SICRH_GPIO_A |\
+	CONFIG_SICRH_GPIO_B |\
+	CONFIG_SICRH_IEEE1588_A |\
+	CONFIG_SICRH_USB |\
+	CONFIG_SICRH_GTM |\
+	CONFIG_SICRH_IEEE1588_B |\
+	CONFIG_SICRH_ETSEC2 |\
+	CONFIG_SICRH_GPIOSEL |\
+	CONFIG_SICRH_TMROBI |\
+	CONFIG_SICRH_TMSOBI1 |\
+	CONFIG_SICRH_TMSOBI2 \
+)
+#endif
+
+#endif

arch/powerpc/cpu/mpc83xx/u-boot.lds

@@ -52,6 +52,12 @@ SECTIONS
   __ex_table : { *(__ex_table) }
   __stop___ex_table = .;
 
+  /*
+   * _end - This is end of u-boot.bin image.
+   * dtb will be appended here to make u-boot-dtb.bin
+   */
+  _end = .;
+
   . = ALIGN(4096);
   __init_begin = .;
   .text.init : { *(.text.init) }

arch/powerpc/cpu/mpc8xxx/fsl_lbc.c

@@ -6,6 +6,10 @@
 #include <common.h>
 #include <asm/fsl_lbc.h>
 
+#ifdef CONFIG_MPC83xx
+#include "../mpc83xx/elbc/elbc.h"
+#endif
+
 #ifdef CONFIG_MPC85xx
 /* Boards should provide their own version of this if they use lbc sdram */
 static void __lbc_sdram_init(void)

arch/powerpc/cpu/mpc8xxx/fsl_pamu.c

@@ -131,10 +131,10 @@ static int pamu_config_ppaace(uint32_t liodn, uint64_t win_addr,
 		set_bf(ppaace->addr_bitfields, PAACE_AF_AP, PAACE_AP_PERMS_ALL);
 	}
 
-	asm volatile("sync" : : : "memory");
+	sync();
 	/* Mark the ppace entry valid */
 	ppaace->addr_bitfields |= PAACE_V_VALID;
-	asm volatile("sync" : : : "memory");
+	sync();
 
 	return 0;
 }
@@ -279,7 +279,7 @@ int pamu_init(void)
 			out_be32(&regs->splah, spaact_lim >> 32);
 			out_be32(&regs->splal, (uint32_t)spaact_lim);
 		}
-		asm volatile("sync" : : : "memory");
+		sync();
 
 		base_addr += PAMU_OFFSET;
 	}
@@ -294,7 +294,7 @@ void pamu_enable(void)
 	for (i = 0; i < CONFIG_NUM_PAMU; i++) {
 		setbits_be32((void *)base_addr + PAMU_PCR_OFFSET,
 			     PAMU_PCR_PE);
-		asm volatile("sync" : : : "memory");
+		sync();
 		base_addr += PAMU_OFFSET;
 	}
 }
@@ -318,7 +318,7 @@ void pamu_reset(void)
 		out_be32(&regs->splal, 0);
 
 		clrbits_be32((void *)regs + PAMU_PCR_OFFSET, PAMU_PCR_PE);
-		asm volatile("sync" : : : "memory");
+		sync();
 		base_addr += PAMU_OFFSET;
 	}
 }
@@ -331,7 +331,7 @@ void pamu_disable(void)
 
 	for (i = 0; i < CONFIG_NUM_PAMU; i++) {
 		clrbits_be32((void *)base_addr + PAMU_PCR_OFFSET, PAMU_PCR_PE);
-		asm volatile("sync" : : : "memory");
+		sync();
 		base_addr += PAMU_OFFSET;
 	}
 }

arch/powerpc/dts/.gitignore

@@ -0,0 +1 @@
+*.dtb

arch/powerpc/dts/Makefile

@@ -2,6 +2,7 @@
 
 dtb-$(CONFIG_TARGET_T2080QDS) += t2080qds.dtb
 dtb-$(CONFIG_TARGET_MCR3000) += mcr3000.dtb
+dtb-$(CONFIG_TARGET_GAZERBEAM) += gazerbeam.dtb
 
 targets += $(dtb-y)
 

arch/powerpc/dts/gazerbeam.dts

@@ -0,0 +1,602 @@
+/*
+ * Gazerbeam CON Device Tree Source
+ *
+ * (C) Copyright 2015
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include "gdsys/mpc8308.dtsi"
+
+/include/ "gdsys/gazerbeam-base.dtsi"
+
+/include/ "gdsys/soc/i2c/cirrus-audio-codec.dtsi"
+/include/ "gdsys/soc/i2c/dallas-rtc.dtsi"
+/include/ "gdsys/soc/lbc/gazerbeam.dtsi"
+/include/ "gdsys/soc/nor/flash-80k-partition.dtsi"
+
+&board_lbc {
+	FPGA0:iocon_uart@1,0 {
+		reg = <0x1 0x0 0x100000>;
+		little-endian;
+		interrupts = <48 0x8>;
+		interrupt-parent = <&ipic>;
+	};
+
+	FPGA1:iocon_uart@2,0 {
+		reg = <0x2 0x0 0x100000>;
+		little-endian;
+		interrupts = <17 0x8>;
+		interrupt-parent = <&ipic>;
+	};
+};
+
+&FPGA0 {
+	compatible = "gdsys,iocon_fpga";
+	#gpio-cells = <2>;
+	gpio-controller;
+	bus = <&FPGA0BUS>;
+	unit_id = <0>;
+	fpga-type = <1>;
+	usb_base = <0x0080>;
+	audio_base = <0x0040>;
+	timebase_base = <0x013c>;
+
+	/*
+	 * for every interrupt source there must be a dataset specifying
+	 * 1. type (1: standard)
+	 * 2. status register offset
+	 * 3. mask register offset
+	 * 4. default mask
+	 */
+	fpga_interrupt_sources =
+		<1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */
+		<1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */
+	/*
+	 * for every interrupt there must be a dataset specifying
+	 * 1. type (1: status, 2: event)
+	 * 2. interrupt source index
+	 * 3. interrupt register bit
+	 * 4. mask register bit
+	 */
+	 #fpga_interrupt_map-cells = <4>;
+	fpga_interrupt_map =
+		<1 0 14 14>, /*  0: EXTENDED_INTERRUPT */
+		<1 0  0  0>, /*  1: VIDEO 0 */
+		<1 0  1  1>, /*  2: VIDEO 1 */
+		<1 0  2  2>, /*  3: VIDEO IC 0 */
+		<1 0  3  3>, /*  4: VIDEO IC 1 */
+		<1 0  4  4>, /*  5: IIC MAIN */
+		<1 0  6  6>, /*  6: IIC VIDEO 0 */
+		<1 0  7  7>, /*  7: IIC VIDEO 1 */
+		<1 1  0  0>, /*  8: OSD 0 */
+		<1 1  1  1>, /*  9: OSD 1 */
+		<1 1  2  2>, /* 10: SPDIF 0 */
+		<1 1  3  3>, /* 11: SPDIF 1 */
+		<1 0 12 12>, /* 12: COMM 0 */
+		<1 0 13 13>, /* 13: COMM 1 */
+		<1 0 10 10>, /* 14: COMM 2 */
+		<1 0 11 11>, /* 15: COMM 3 */
+		<2 0  5  5>, /* 16: MDIO */
+		<1 0  8  8>, /* 17: PHY */
+		<1 1  4  4>, /* 18: RS232 */
+		<1 1  5  5>, /* 19: AUDIO */
+		<1 1  8  8>, /* 20: PROC_AUDIO */
+		<1 1  7  7>, /* 21: USB/ETH-UART INT */
+		<2 1 10 10>, /* 22: AXI Bridge 0 */
+		<2 1 11 11>, /* 23: AXI Bridge 1 */
+		<2 1  9  9>, /* 24: USB/ETH-Secondary IIC */
+		<>;
+};
+
+&FPGA1 {
+	compatible = "gdsys,iocon_fpga";
+	#gpio-cells = <2>;
+	gpio-controller;
+	bus = <&FPGA1BUS>;
+	unit_id = <1>;
+	fpga-type = <1>;
+	usb_base = <0x0070>;
+	audio_base = <0x0040>;
+	timebase_base = <0x013c>;
+
+	/*
+	 * for every interrupt source there must be a dataset specifying
+	 * 1. type (1: standard)
+	 * 2. status register offset
+	 * 3. mask register offset
+	 * 4. default mask
+	 */
+	fpga_interrupt_sources =
+		<1 0x000a 0x000c 0x4000>, /* 0: TOP_INTERRUPT */
+		<1 0x001c 0x001e 0x0000>; /* 1: EXTENDED_INTERRUPT */
+	/*
+	 * for every interrupt there must be a dataset specifying
+	 * 1. type (1: status, 2: event)
+	 * 2. interrupt source index
+	 * 3. interrupt register bit
+	 * 4. mask register bit
+	 */
+	 #fpga_interrupt_map-cells = <4>;
+	fpga_interrupt_map =
+		<1 0 14 14>, /*  0: EXTENDED_INTERRUPT */
+		<1 0  0  0>, /*  1: VIDEO 0 */
+		<1 0  1  1>, /*  2: VIDEO 1 */
+		<1 0  2  2>, /*  3: VIDEO IC 0 */
+		<1 0  3  3>, /*  4: VIDEO IC 1 */
+		<1 0  4  4>, /*  5: IIC MAIN */
+		<1 0  6  6>, /*  6: IIC VIDEO 0 */
+		<1 0  7  7>, /*  7: IIC VIDEO 1 */
+		<1 1  0  0>, /*  8: OSD 0 */
+		<1 1  1  1>, /*  9: OSD 1 */
+		<1 1  2  2>, /* 10: SPDIF 0 */
+		<1 1  3  3>, /* 11: SPDIF 1 */
+		<1 0 12 12>, /* 12: COMM 0 */
+		<1 0 13 13>, /* 13: COMM 1 */
+		<1 0 10 10>, /* 14: COMM 2 */
+		<1 0 11 11>, /* 15: COMM 3 */
+		<2 0  5  5>, /* 16: MDIO */
+		<1 0  8  8>, /* 17: PHY */
+		<1 1  4  4>, /* 18: RS232 */
+		<1 1  5  5>, /* 19: AUDIO */
+		<1 1  8  8>, /* 20: PROC_AUDIO */
+		<1 1  7  7>, /* 21: USB/ETH-UART INT */
+		<2 1 10 10>, /* 22: AXI Bridge 0 */
+		<2 1 11 11>, /* 23: AXI Bridge 1 */
+		<2 1  9  9>, /* 24: USB/ETH-Secondary IIC */
+		<>;
+};
+
+/ {
+	FPGA0BUS: fpga0bus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x00002000>;
+
+		compatible = "gdsys,soc";
+
+		fpga0_rs232 {
+			compatible = "gdsys,ihs_trans_rs232";
+			reg = <0x50 0x08>;
+			little-endian;
+		};
+
+		fpga0_uart_usb {
+			compatible = "gdsys,ihs_simple_uart";
+			reg = <0xa0 0x08>;
+			little-endian;
+			fpga_interrupts = <21>;
+			line = <0>;
+		};
+
+		fpga0_iic_main {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0x60 0x10>;
+			little-endian;
+			fpga_interrupts = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga0_dp_video0_redriver: fpga0_dp_video0_redriver {
+				compatible = "ti,sn75dp130";
+				reg = <0x2c>;
+				eq-i2c-enable = <3 2 1 0
+						 3 2 1 0
+						 3 2 1 0
+						 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */
+			};
+			fpga0_dp_video1_redriver: fpga0_dp_video1_redriver {
+				compatible = "ti,sn75dp130";
+				reg = <0x2e>;
+				eq-i2c-enable = <3 2 1 0
+						 3 2 1 0
+						 3 2 1 0
+						 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */
+			};
+			lm77@48 {
+				compatible = "national,lm77";
+				reg = <0x48>;
+			};
+			ads1015@49 {
+				compatible = "ti,ads1015";
+				reg = <0x49>;
+			};
+			ads1015@4b {
+				compatible = "ti,ads1015";
+				reg = <0x4b>;
+			};
+		};
+
+		fpga0_video0 {
+			compatible = "gdsys,ihs_video_out";
+			reg = <0x100 0x40>;
+			little-endian;
+			fpga_interrupts = <1 8>; /* VIDEO OSD */
+			osd_base = <0x180>;
+			osd_buffer_base = <0x1000>;
+			spdif_audio_base = <0x1e0>;
+			video_index = <0>;
+			video_id = <0>;
+			fpga-force-pos-pol;
+			sync-source;
+			fpga-pb-pixels = <2730>; /* 8192 / 3 */
+			fpga-ra-lines = <2>;
+			video_tx = <&fpga0_dp_video0>;
+			clk_gen = <&fpga0_video0_clkgen>;
+			ddc_ci = <&fpga0_dp_video0>;
+		};
+
+		fpga0_iic_video0  {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0x1c0 0x10>;
+			little-endian;
+			fpga_interrupts = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga0_video0_clkgen: fpga0_video0_clkgen {
+				compatible = "idt,ics8n3qv01";
+				reg = <0x6e>;
+				channel = <0>;
+			};
+		};
+
+		fpga0_axi_video0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "gdsys,ihs_axi";
+			reg = <0x170 0x10>;
+			little-endian;
+			fpga_interrupts = <22>;
+
+			fpga0_dp_video0: fpga0_dp_video0 {
+				compatible = "gdsys,logicore_dp_tx";
+				reg = <0x44a10000 0x1000>;
+				little-endian;
+				redriver = <&fpga0_dp_video0_redriver>;
+				video_id = <0>;
+			};
+		};
+
+		fpga0_video1 {
+			compatible = "gdsys,ihs_video_out";
+			reg = <0x200 0x40>;
+			little-endian;
+			fpga_interrupts = <2 9>; /* VIDEO OSD */
+			osd_base = <0x280>;
+			osd_buffer_base = <0x2000>;
+			spdif_audio_base = <0x2e0>;
+			video_index = <1>;
+			video_id = <1>;
+			fpga-force-pos-pol;
+			sync-source;
+			fpga-pb-pixels = <2730>; /* 8192 / 3 */
+			fpga-ra-lines = <2>;
+			video_tx = <&fpga0_dp_video1>;
+			clk_gen = <&fpga0_video1_clkgen>;
+			ddc_ci = <&fpga0_dp_video1>;
+		};
+
+		fpga0_iic_video1  {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0x2c0 0x10>;
+			little-endian;
+			fpga_interrupts = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga0_video1_clkgen: fpga0_video1_clkgen {
+				compatible = "idt,ics8n3qv01";
+				reg = <0x6e>;
+				channel = <1>;
+			};
+		};
+
+		fpga0_axi_video1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "gdsys,ihs_axi";
+			reg = <0x270 0x10>;
+			little-endian;
+			fpga_interrupts = <23>;
+
+			fpga0_dp_video1: fpga0_dp_video1 {
+				compatible = "gdsys,logicore_dp_tx";
+				reg = <0x44a10000 0x1000>;
+				little-endian;
+				redriver = <&fpga0_dp_video1_redriver>;
+				video_id = <1>;
+			};
+		};
+
+		fpga0_iic_usb {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0xb0 0x10>;
+			little-endian;
+			fpga_interrupts = <24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+
+		fpga0_ep0 {
+			compatible = "gdsys,io-endpoint";
+			reg = < 0x020 0x10
+				0x320 0x10
+				0x340 0x10
+				0x360 0x10>;
+			little-endian;
+			irq-model-local;
+			fpga_interrupts = <12 13 14 15>;
+			pollcycle = <200>;
+			nprot_channel = <16>;
+			uart_line = <0>;
+			ep_index = <0>;
+			line_protocol = <1>;
+		};
+
+		fpga0_mdio {
+			compatible = "gdsys,ihs_mdiomaster";
+			reg = <0x0058 0x10>;
+			little-endian;
+			fpga_interrupts = <16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga0_phy0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <0>;
+			};
+			fpga0_phy1 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <1>;
+			};
+			fpga0_phy2 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <2>;
+			};
+			fpga0_phy3 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <3>;
+			};
+		};
+
+	};
+
+
+	FPGA1BUS: fpga1bus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0x00002000>;
+
+		compatible = "gdsys,soc";
+
+		fpga1_uart_usb {
+			compatible = "gdsys,ihs_simple_uart";
+			reg = <0xa0 0x08>;
+			little-endian;
+			fpga_interrupts = <21>;
+			line = <4>; /* TODO check and FIX */
+		};
+
+		fpga1_iic_main {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0x60 0x10>;
+			little-endian;
+			fpga_interrupts = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga1_dp_video0_redriver: fpga1_dp_video0_redriver {
+				compatible = "ti,sn75dp130";
+				reg = <0x2c>;
+				eq-i2c-enable = <3 2 1 0
+						 3 2 1 0
+						 3 2 1 0
+						 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */
+			};
+			fpga1_dp_video1_redriver: fpga1_dp_video1_redriver {
+				compatible = "ti,sn75dp130";
+				reg = <0x2e>;
+				eq-i2c-enable = <3 2 1 0
+						 3 2 1 0
+						 3 2 1 0
+						 3 2 1 0>; /* 3.5 dB for all pe values for all lanes */
+			};
+			lm77@48 {
+				compatible = "national,lm77";
+				reg = <0x48>;
+			};
+			ads1015@49 {
+				compatible = "ti,ads1015";
+				reg = <0x49>;
+			};
+			ads1015@4b {
+				compatible = "ti,ads1015";
+				reg = <0x4b>;
+			};
+		};
+
+		fpga1_video0 {
+			compatible = "gdsys,ihs_video_out";
+			reg = <0x100 0x40>;
+			little-endian;
+			fpga_interrupts = <1 8>; /* VIDEO OSD */
+			osd_base = <0x180>;
+			osd_buffer_base = <0x1000>;
+			spdif_audio_base = <0x1e0>;
+			video_index = <0>;
+			video_id = <4>;
+			fpga-force-pos-pol;
+			sync-source;
+			fpga-pb-pixels = <2730>; /* 8192 / 3 */
+			fpga-ra-lines = <2>;
+			video_tx = <&fpga1_dp_video0>;
+			clk_gen = <&fpga1_video0_clkgen>;
+			ddc_ci = <&fpga1_dp_video0>;
+		};
+
+		fpga1_iic_video0  {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0x1c0 0x10>;
+			little-endian;
+			fpga_interrupts = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga1_video0_clkgen: fpga1_video0_clkgen {
+				compatible = "idt,ics8n3qv01";
+				reg = <0x6e>;
+				channel = <4>;
+			};
+		};
+
+		fpga1_axi_video0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "gdsys,ihs_axi";
+			reg = <0x170 0x10>;
+			little-endian;
+			fpga_interrupts = <22>;
+
+			fpga1_dp_video0: fpga1_dp_video0 {
+				compatible = "gdsys,logicore_dp_tx";
+				reg = <0x44a10000 0x1000>;
+				little-endian;
+				redriver = <&fpga1_dp_video0_redriver>;
+				video_id = <4>;
+			};
+		};
+
+		fpga1_video1 {
+			compatible = "gdsys,ihs_video_out";
+			reg = <0x200 0x40>;
+			little-endian;
+			fpga_interrupts = <2 9>; /* VIDEO OSD */
+			osd_base = <0x280>;
+			osd_buffer_base = <0x2000>;
+			spdif_audio_base = <0x2e0>;
+			video_index = <1>;
+			video_id = <5>;
+			fpga-force-pos-pol;
+			sync-source;
+			fpga-pb-pixels = <2730>; /* 8192 / 3 */
+			fpga-ra-lines = <2>;
+			video_tx = <&fpga1_dp_video1>;
+			clk_gen = <&fpga1_video1_clkgen>;
+			ddc_ci = <&fpga1_dp_video1>;
+		};
+
+		fpga1_iic_video1  {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0x2c0 0x10>;
+			little-endian;
+			fpga_interrupts = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga1_video1_clkgen: fpga1_video1_clkgen {
+				compatible = "idt,ics8n3qv01";
+				reg = <0x6e>;
+				channel = <5>;
+			};
+		};
+
+		fpga1_axi_video1 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "gdsys,ihs_axi";
+			reg = <0x270 0x10>;
+			little-endian;
+			fpga_interrupts = <23>;
+
+			fpga1_dp_video1: fpga1_dp_video1 {
+				compatible = "gdsys,logicore_dp_tx";
+				reg = <0x44a10000 0x1000>;
+				little-endian;
+				redriver = <&fpga1_dp_video1_redriver>;
+				video_id = <5>;
+			};
+		};
+
+		fpga1_iic_usb {
+			compatible = "gdsys,ihs_i2cmaster";
+			reg = <0xb0 0x10>;
+			little-endian;
+			fpga_interrupts = <24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555@20 {
+				compatible = "nxp,pca9555";
+				reg = <0x20>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+
+		fpga1_ep0 {
+			compatible = "gdsys,io-endpoint";
+			reg = < 0x020 0x10
+				0x320 0x10
+				0x340 0x10
+				0x360 0x10>;
+			little-endian;
+			irq-model-local;
+			fpga_interrupts = <12 13 14 15>;
+			pollcycle = <200>;
+			nprot_channel = <17>;
+			uart_line = <1>;
+			ep_index = <0>;
+			line_protocol = <1>;
+		};
+
+		fpga1_mdio {
+			compatible = "gdsys,ihs_mdiomaster";
+			reg = <0x0058 0x10>;
+			little-endian;
+			fpga_interrupts = <16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fpga1_phy0 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <0>;
+			};
+			fpga1_phy1 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <1>;
+			};
+			fpga1_phy2 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <2>;
+			};
+			fpga1_phy3 {
+				compatible = "ethernet-phy-ieee802.3-c45";
+				device_type ="ethernet-phy";
+				reg = <3>;
+			};
+		};
+
+	};
+
+};
+
+#include "gdsys/gazerbeam-uboot.dtsi"

arch/powerpc/dts/gdsys/gazerbeam-base.dtsi

@@ -0,0 +1,185 @@
+/*
+ * Gazerbeam Device Tree Source
+ *
+ * (C) Copyright 2015
+ * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "gdsys,gazerbeam";
+	compatible = "fsl,mpc8308rdb";
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+};
+
+&enet1 {
+	status = "okay";
+};
+
+&IIC {
+	fsl,preserve-clocking;
+
+	at97sc3205t@29 {
+		compatible = "atmel,at97sc3204t";
+		reg = <0x29>;
+	};
+
+	lm77@48 {
+		compatible = "national,lm77";
+		reg = <0x48>;
+	};
+
+	ads1015@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+	};
+
+	lm77@4a {
+		compatible = "national,lm77";
+		reg = <0x4a>;
+	};
+
+	emc2305@2e {
+		compatible = "smsc,emc2305";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x2e>;
+		fan@0 {
+			reg = <0>;
+		};
+		fan@1 {
+			reg = <1>;
+		};
+		fan@2 {
+			reg = <2>;
+		};
+		fan@3 {
+			reg = <3>;
+		};
+		fan@4 {
+			reg = <4>;
+		};
+	};
+
+	emc2305@4c {
+		compatible = "smsc,emc2305";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x4c>;
+		fan@0 {
+			reg = <0>;
+		};
+		fan@1 {
+			reg = <1>;
+		};
+		fan@2 {
+			reg = <2>;
+		};
+		fan@3 {
+			reg = <3>;
+		};
+		fan@4 {
+			reg = <4>;
+		};
+	};
+
+	at24c512@54 {
+		compatible = "atmel,24c512";
+		reg = <0x54>;
+	};
+
+	/* PPC-Board */
+	pca9698@22 {
+		compatible = "nxp,pca9698";
+		reg = <0x22>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	/* IO-Board */
+	pca9698@20 {
+		compatible = "nxp,pca9698";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&IIC2 {
+	fsl,preserve-clocking;
+
+	status = "okay";
+
+	/* MC2/SC-Board */
+	GPIO_VB0: pca9698@20 {
+		compatible = "nxp,pca9698";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	/* MC4-Board */
+	GPIO_VB1: pca9698@22 {
+		compatible = "nxp,pca9698";
+		reg = <0x22>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&SPI {
+	gpios = < /*SPI-CSS-FPGA-U-FLASH#*/ &gpio0 8 0
+		  /*SPI-CSS-FPGA-O-FLASH#*/ &gpio0 6 0
+		  /*SPI-CSS-STDP1_U-FLASH#*/ &gpio0 12 0
+		  /*SPI-CSS-STDP2_U-FLASH#*/ &gpio0 11 0
+		  /*SPI-CSS-STDP1_O-FLASH#*/ &gpio0 15 0
+		  /*SPI-CSS-STDP2_O-FLASH#*/ &gpio0 3 0>;
+
+	m25p16@0 {
+		compatible = "st,n25q128a11";
+		reg = <0x0>;
+		spi-max-frequency = <20000000>;
+	};
+
+	m25p16@1 {
+		compatible = "st,n25q128a11";
+		reg = <0x1>;
+		spi-max-frequency = <20000000>;
+	};
+
+	m25p16@2 {
+		compatible = "st,m25p40";
+		reg = <0x2>;
+		spi-max-frequency = <20000000>;
+	};
+
+	m25p16@3 {
+		compatible = "st,m25p40";
+		reg = <0x3>;
+		spi-max-frequency = <20000000>;
+	};
+
+	m25p16@4 {
+		compatible = "st,m25p40";
+		reg = <0x4>;
+		spi-max-frequency = <20000000>;
+	};
+
+	m25p16@5 {
+		compatible = "st,m25p40";
+		reg = <0x5>;
+		spi-max-frequency = <20000000>;
+	};
+};

arch/powerpc/dts/gdsys/gazerbeam-uboot.dtsi

@@ -0,0 +1,250 @@
+#include <dt-bindings/memory/mpc83xx-sdram.h>
+#include <dt-bindings/clk/mpc83xx-clk.h>
+
+/ {
+	aliases {
+		i2c0 = &IIC;
+		i2c1 = &IIC2;
+		i2c2 = "/fpga0bus/fpga0_iic_main";
+		i2c3 = "/fpga0bus/fpga0_iic_video0";
+		i2c4 = "/fpga0bus/fpga0_iic_video1";
+		i2c5 = "/fpga0bus/fpga0_iic_usb";
+		gdsys_soc0 = "/fpga0bus";
+		gdsys_soc1 = "/fpga1bus";
+		ioep0 = "/fpga0bus/fpga0_ep0";
+		ioep1 = "/fpga0bus/fpga1_ep0";
+	};
+
+	chosen {
+		stdout-path = &serial1;
+	};
+
+	cpus {
+		compatible = "cpu_bus";
+		u-boot,dm-pre-reloc;
+
+		PowerPC,8308@0 {
+			compatible = "fsl,mpc8308";
+			clocks = <&socclocks MPC83XX_CLK_CORE
+			          &socclocks MPC83XX_CLK_CSB>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	board {
+		compatible = "gdsys,board_gazerbeam";
+		csb = <&board_soc>;
+		serdes = <&SERDES>;
+		rxaui0 = <&RXAUI0_0>;
+		rxaui1 = <&RXAUI0_1>;
+		rxaui2 = <&RXAUI0_2>;
+		rxaui3 = <&RXAUI0_3>;
+		rxaui4 = <&RXAUI1_0>;
+		rxaui5 = <&RXAUI1_1>;
+		rxaui6 = <&RXAUI1_2>;
+		rxaui7 = <&RXAUI1_3>;
+		fpga0 = <&FPGA0>;
+		fpga1 = <&FPGA1>;
+		ioep0 = <&IOEP0>;
+		ioep1 = <&IOEP1>;
+
+		ver-gpios = <&PPCPCA 12 0
+			     &PPCPCA 13 0
+			     &PPCPCA 14 0
+			     &PPCPCA 15 0>;
+
+		/* MC2/SC-Board */
+		var-gpios-mc2 = <&GPIO_VB0 0 0    /* VAR-MC_SC */
+				 &GPIO_VB0 11 0>; /* VAR-CON */
+		/* MC4-Board */
+		var-gpios-mc4 = <&GPIO_VB1 0 0    /* VAR-MC_SC */
+				 &GPIO_VB1 11 0>; /* VAR-CON */
+
+		reset-gpios = <&gpio0 1 0 &gpio0 2 1>;
+	};
+
+	socclocks: clocks {
+		compatible = "fsl,mpc8308-clk";
+		#clock-cells = <1>;
+		u-boot,dm-pre-reloc;
+	};
+
+	timer {
+		compatible = "fsl,mpc83xx-timer";
+		clocks = <&socclocks MPC83XX_CLK_CSB>;
+	};
+};
+
+&FPGA0 {
+	reset-gpios = <&PPCPCA 26 0>;
+	done-gpios = <&GPIO_VB0 19 0>;
+};
+
+&FPGA1 {
+	status = "disable";
+};
+
+&FPGA0BUS {
+	ranges = <0x0 0xe0600000 0x00004000>;
+	fpga = <&FPGA0>;
+
+	fpga0_video0 {
+		mode = "640_480_60";
+
+		status = "disabled";
+	};
+
+	RXAUI0_0: fpga0_rxaui@fc0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0fc0 0x10>;
+	};
+
+	fpga0_iic_video0  {
+		status = "disabled";
+	};
+
+	fpga0_axi_video0 {
+		status = "disabled";
+	};
+
+	fpga0_video1 {
+		mode = "640_480_60";
+		status = "disabled";
+	};
+
+	fpga0_iic_video1  {
+		status = "disabled";
+	};
+
+	fpga0_axi_video1 {
+		status = "disabled";
+	};
+
+	IOEP0: fpga0_ep0 {
+	};
+
+	RXAUI0_1: fpga0_rxaui@fd0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0fd0 0x10>;
+	};
+
+	RXAUI0_2: fpga0_rxaui@fe0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0fe0 0x10>;
+	};
+
+	RXAUI0_3: fpga0_rxaui@ff0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0ff0 0x10>;
+	};
+};
+
+&FPGA1BUS {
+	ranges = <0x0 0xe0700000 0x00004000>;
+	fpga = <&FPGA1>;
+
+	status = "disable";
+
+	fpga1_video0 {
+		mode = "640_480_60";
+	};
+
+	RXAUI1_0: fpga0_rxaui@fc0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0fc0 0x10>;
+	};
+
+	fpga1_video1 {
+		mode = "640_480_60";
+	};
+
+	IOEP1: fpga1_ep0 {
+	};
+
+	RXAUI1_1: fpga0_rxaui@fd0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0fd0 0x10>;
+	};
+
+	RXAUI1_2: fpga0_rxaui@fe0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0fe0 0x10>;
+	};
+
+	RXAUI1_3: fpga0_rxaui@ff0 {
+		compatible = "gdsys,rxaui_ctrl";
+		reg = <0x0ff0 0x10>;
+	};
+};
+
+&board_soc {
+	u-boot,dm-pre-reloc;
+	clocks = <&socclocks MPC83XX_CLK_CSB>;
+
+	memory@2000 {
+		u-boot,dm-pre-reloc;
+	};
+
+	sdhc@2e000 {
+		clocks = <&socclocks MPC83XX_CLK_SDHC>;
+		clock-names = "per";
+	};
+
+	SERDES: serdes@e3000 {
+		reg = <0xe3000 0x200>;
+		compatible = "fsl,mpc83xx-serdes";
+		proto = "pex";
+		serdes-clk = <100>;
+		vdd;
+	};
+};
+
+&IIC {
+	clocks = <&socclocks MPC83XX_CLK_I2C1>;
+
+	PPCPCA: pca9698@20 {
+		label = "ppc";
+	};
+
+	IOPCA: pca9698@22 {
+		label = "io";
+	};
+
+	at97sc3205t@29 {
+		u-boot,i2c-offset-len = <0>;
+	};
+};
+
+&IIC2 {
+	clocks = <&socclocks MPC83XX_CLK_I2C2>;
+
+	GPIO_VB0: pca9698@20 {
+		label = "mc2-sc";
+	};
+
+	GPIO_VB1: pca9698@22 {
+		label = "mc4";
+	};
+};
+
+&board_soc {
+	u-boot,dm-pre-reloc;
+};
+
+&GPIO_VB0 {
+	u-boot,dm-pre-reloc;
+};
+
+&serial0 {
+	clocks = <&socclocks MPC83XX_CLK_CSB>;
+	u-boot,dm-pre-reloc;
+};
+
+&serial1 {
+	clocks = <&socclocks MPC83XX_CLK_CSB>;
+	u-boot,dm-pre-reloc;
+};
+
+&pci0 {
+	clocks = <&socclocks MPC83XX_CLK_PCIEXP1>;
+};

arch/powerpc/dts/gdsys/mpc8308.dtsi

@@ -0,0 +1,354 @@
+/*
+ * Basic platform for gdsys mpc8308 based devices
+ *
+ * (C) Copyright 2014
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * based on mpc8308rdb
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/memory/mpc83xx-sdram.h>
+
+/ {
+	compatible = "fsl,mpc8308rdb";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	board_lbc: localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+	};
+
+	board_soc: immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8308-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		memory@2000 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc83xx-mem-controller";
+			reg = <0x2000 0x1000>;
+			device_type = "memory";
+
+			driver_software_override = <DSO_ENABLE>;
+			p_impedance_override = <DSO_P_IMPEDANCE_NOMINAL>;
+			n_impedance_override = <DSO_N_IMPEDANCE_NOMINAL>;
+			odt_termination_value = <ODT_TERMINATION_150_OHM>;
+			ddr_type = <DDR_TYPE_DDR2_1_8_VOLT>;
+
+			clock_adjust = <CLOCK_ADJUST_05>;
+
+			read_to_write = <0>;
+			write_to_read = <0>;
+			read_to_read = <0>;
+			write_to_write = <0>;
+			active_powerdown_exit = <2>;
+			precharge_powerdown_exit = <6>;
+			odt_powerdown_exit = <8>;
+			mode_reg_set_cycle = <2>;
+
+			precharge_to_activate = <2>;
+			activate_to_precharge = <6>;
+			activate_to_readwrite = <2>;
+			mcas_latency = <CASLAT_40>;
+			refresh_recovery = <17>;
+			last_data_to_precharge = <2>;
+			activate_to_activate = <2>;
+			last_write_data_to_read = <2>;
+
+			additive_latency = <0>;
+			mcas_to_preamble_override = <READ_LAT_PLUS_1_2>;
+			write_latency = <3>;
+			read_to_precharge = <2>;
+			write_cmd_to_write_data = <CLOCK_DELAY_1_2>;
+			minimum_cke_pulse_width = <3>;
+			four_activates_window = <5>;
+
+			self_refresh = <SREN_ENABLE>;
+			sdram_type = <TYPE_DDR2>;
+			databus_width = <DATA_BUS_WIDTH_32>;
+
+			force_self_refresh = <MODE_NORMAL>;
+			dll_reset = <DLL_RESET_ENABLE>;
+			dqs_config = <DQS_TRUE>;
+			odt_config = <ODT_ASSERT_READS>;
+			posted_refreshes = <1>;
+
+			refresh_interval = <2084>;
+			precharge_interval = <256>;
+
+			sdmode = <0x0242>;
+			esdmode = <0x0440>;
+
+			ram@0 {
+				reg = <0x0 0x0 0x8000000>;
+				compatible = "nanya,nt5tu64m16hg";
+
+				odt_rd_cfg = <ODT_RD_NEVER>;
+				odt_wr_cfg = <ODT_WR_ONLY_CURRENT>;
+				bank_bits = <3>;
+				row_bits = <13>;
+				col_bits = <10>;
+			};
+		};
+
+		IIC:i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		IIC2: i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			status = "disabled";
+		};
+
+		SPI:spi@7000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		sdhc@2e000 {
+			compatible = "fsl,esdhc", "fsl,mpc8308-esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <42 0x8>;
+			interrupt-parent = <&ipic>;
+			sdhci,auto-cmd12;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "fsl,ns16550", "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio0: gpio@c00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+		dma@2c000 {
+			compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
+			reg = <0x2c000 0x1800>;
+			interrupts = <3 0x8
+					94 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar", "fsl,tsec";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+				phy2: ethernet-phy@0 {
+					reg = <0x0>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar", "fsl,tsec";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = < &phy2 >;
+			status = "disabled";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};

arch/powerpc/dts/gdsys/soc/i2c/cirrus-audio-codec.dtsi

@@ -0,0 +1,6 @@
+&IIC {
+	cs4265@4f {
+		compatible = "cirrus,cs4265";
+		reg = <0x0000004f>;
+	};
+};

arch/powerpc/dts/gdsys/soc/i2c/dallas-rtc.dtsi

@@ -0,0 +1,6 @@
+&IIC {
+	ds1339@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};

arch/powerpc/dts/gdsys/soc/lbc/gazerbeam.dtsi

@@ -0,0 +1,5 @@
+&board_lbc {
+	ranges = <0x0 0x0 0xfe000000 0x00800000
+	          0x1 0x0 0xe0600000 0x00003000
+		  0x2 0x0 0xe0700000 0x00003000>;
+};

arch/powerpc/dts/gdsys/soc/nor/flash-80k-partition.dtsi

@@ -0,0 +1,20 @@
+&board_lbc {
+	flash@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x100000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		u-boot@0 {
+			reg = <0x0 0x80000>;
+		};
+		env@80000 {
+			reg = <0x80000 0x10000>;
+		};
+		env1@90000 {
+			reg = <0x90000 0x10000>;
+		};
+	};
+};

arch/powerpc/include/asm/arch-mpc83xx/clock.h

@@ -0,0 +1,22 @@
+/*
+ * (C) Copyright 2018
+ * Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_POWERPC_CLOCK_H
+#define __ASM_POWERPC_CLOCK_H
+
+/* Make fsl_esdhc driver happy */
+enum mxc_clock {
+	MXC_ESDHC_CLK,
+};
+
+DECLARE_GLOBAL_DATA_PTR;
+
+uint mxc_get_clock(int clk)
+{
+	return gd->arch.sdhc_clk;
+}
+#endif /* __ASM_POWERPC_CLOCK_H */

arch/powerpc/include/asm/arch-mpc83xx/gpio.h

@@ -6,10 +6,10 @@
 /*
  * The MCP83xx's 1-2 GPIO controllers each with 32 bits.
  */
-#if defined(CONFIG_MPC8313) || defined(CONFIG_MPC8308) || \
-	defined(CONFIG_MPC8315)
+#if defined(CONFIG_ARCH_MPC8313) || defined(CONFIG_ARCH_MPC8308) || \
+	defined(CONFIG_ARCH_MPC8315)
 #define MPC83XX_GPIO_CTRLRS 1
-#elif defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+#elif defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 #define MPC83XX_GPIO_CTRLRS 2
 #else
 #define MPC83XX_GPIO_CTRLRS 0
@@ -17,7 +17,15 @@
 
 #define MAX_NUM_GPIOS (32 * MPC83XX_GPIO_CTRLRS)
 
+struct mpc8xxx_gpio_plat {
+       ulong addr;
+       unsigned long size;
+       uint ngpios;
+};
+
+#ifndef DM_GPIO
 void mpc83xx_gpio_init_f(void);
 void mpc83xx_gpio_init_r(void);
+#endif	/* DM_GPIO */
 
 #endif	/* MPC83XX_GPIO_H_ */

arch/powerpc/include/asm/fsl_lbc.h

@@ -43,10 +43,10 @@ void lbc_sdram_init(void);
 #define BR_MSEL				0x000000E0
 #define BR_MSEL_SHIFT			5
 #define BR_MS_GPCM			0x00000000	/* GPCM */
-#if !defined(CONFIG_MPC834x) && !defined(CONFIG_MPC8360)
+#if !defined(CONFIG_ARCH_MPC834X) && !defined(CONFIG_ARCH_MPC8360)
 #define BR_MS_FCM			0x00000020	/* FCM */
 #endif
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8360)
+#if defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC8360)
 #define BR_MS_SDRAM			0x00000060	/* SDRAM */
 #elif defined(CONFIG_MPC85xx)
 #define BR_MS_SDRAM			0x00000000	/* SDRAM */
@@ -54,7 +54,7 @@ void lbc_sdram_init(void);
 #define BR_MS_UPMA			0x00000080	/* UPMA */
 #define BR_MS_UPMB			0x000000A0	/* UPMB */
 #define BR_MS_UPMC			0x000000C0	/* UPMC */
-#if !defined(CONFIG_MPC834x)
+#if !defined(CONFIG_ARCH_MPC834X)
 #define BR_ATOM				0x0000000C
 #define BR_ATOM_SHIFT			2
 #endif
@@ -67,7 +67,7 @@ void lbc_sdram_init(void);
 #define UPMB			1
 #define UPMC			2
 
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
 #else
 #define BR_RES				~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
@@ -133,7 +133,7 @@ void lbc_sdram_init(void);
 #define OR_GPCM_EHTR_SHIFT		1
 #define OR_GPCM_EHTR_CLEAR		0x00000000
 #define OR_GPCM_EHTR_SET		0x00000002
-#if !defined(CONFIG_MPC8308)
+#if !defined(CONFIG_ARCH_MPC8308)
 #define OR_GPCM_EAD			0x00000001
 #define OR_GPCM_EAD_SHIFT		0
 #endif
@@ -428,14 +428,17 @@ void lbc_sdram_init(void);
 #define LSDMR_BSMA1516	(3 << (31 - 10))
 #define LSDMR_BSMA1617	(4 << (31 - 10))
 #define LSDMR_RFCR5	(3 << (31 - 16))
+#define LSDMR_RFCR8     (5 << (31 - 16))
 #define LSDMR_RFCR16	(7 << (31 - 16))
 #define LSDMR_PRETOACT3 (3 << (31 - 19))
+#define LSDMR_PRETOACT6 (5 << (31 - 19))
 #define LSDMR_PRETOACT7	(7 << (31 - 19))
 #define LSDMR_ACTTORW3	(3 << (31 - 22))
 #define LSDMR_ACTTORW7	(7 << (31 - 22))
 #define LSDMR_ACTTORW6	(6 << (31 - 22))
 #define LSDMR_BL8	(1 << (31 - 23))
 #define LSDMR_WRC2	(2 << (31 - 27))
+#define LSDMR_WRC3      (3 << (31 - 27))
 #define LSDMR_WRC4	(0 << (31 - 27))
 #define LSDMR_BUFCMD	(1 << (31 - 29))
 #define LSDMR_CL3	(3 << (31 - 31))

arch/powerpc/include/asm/global_data.h

@@ -35,35 +35,35 @@ struct arch_global_data {
 #else
 	/* There are other clocks in the MPC83XX */
 	u32 csb_clk;
-# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
+# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC834X) || defined(CONFIG_ARCH_MPC837X)
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
-# elif defined(CONFIG_MPC8309)
+# elif defined(CONFIG_ARCH_MPC8309)
 	u32 usbdr_clk;
 # endif
-# if defined(CONFIG_MPC834x)
+# if defined(CONFIG_ARCH_MPC834X)
 	u32 usbmph_clk;
-# endif /* CONFIG_MPC834x */
-# if defined(CONFIG_MPC8315)
+# endif /* CONFIG_ARCH_MPC834X */
+# if defined(CONFIG_ARCH_MPC8315)
 	u32 tdm_clk;
 # endif
 	u32 core_clk;
 	u32 enc_clk;
 	u32 lbiu_clk;
 	u32 lclk_clk;
-# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
-	defined(CONFIG_MPC837x)
+# if defined(CONFIG_ARCH_MPC8308) || defined(CONFIG_ARCH_MPC831X) || \
+	defined(CONFIG_ARCH_MPC837X)
 	u32 pciexp1_clk;
 	u32 pciexp2_clk;
 # endif
-# if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+# if defined(CONFIG_ARCH_MPC837X) || defined(CONFIG_ARCH_MPC8315)
 	u32 sata_clk;
 # endif
-# if defined(CONFIG_MPC8360)
+# if defined(CONFIG_ARCH_MPC8360)
 	u32 mem_sec_clk;
-# endif /* CONFIG_MPC8360 */
+# endif /* CONFIG_ARCH_MPC8360 */
 #endif
 #endif
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)

arch/powerpc/include/asm/immap_83xx.h

@@ -59,12 +59,12 @@ typedef struct sysconf83xx {
 	u32 obir;		/* Output Buffer Impedance Register */
 	u8 res8[0xC];
 	u32 pecr1;		/* PCI Express control register 1 */
-#if defined(CONFIG_MPC830x)
+#if defined(CONFIG_ARCH_MPC830X)
 	u32 sdhccr;		/* eSDHC Control Registers for MPC830x */
 #else
 	u32 pecr2;		/* PCI Express control register 2 */
 #endif
-#if defined(CONFIG_MPC8309)
+#if defined(CONFIG_ARCH_MPC8309)
 	u32 can_dbg_ctrl;
 	u32 res9a;
 	u32 gpr1;
@@ -604,7 +604,7 @@ typedef struct serdes83xx {
  * On Chip ROM
  */
 typedef struct rom83xx {
-#if defined(CONFIG_MPC8309)
+#if defined(CONFIG_ARCH_MPC8309)
 	u8 mem[0x8000];
 #else
 	u8 mem[0x10000];
@@ -625,7 +625,7 @@ typedef struct tdmdmac83xx {
 	u8 fixme[0x2000];
 } tdmdmac83xx_t;
 
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -666,7 +666,7 @@ typedef struct immap {
 	u8			res7[0xC0000];
 } immap_t;
 
-#ifndef	CONFIG_MPC834x
+#ifndef	CONFIG_ARCH_MPC834X
 #ifdef CONFIG_HAS_FSL_MPH_USB
 #define CONFIG_SYS_MPC83xx_USB1_OFFSET  0x22000	/* use the MPH controller */
 #define CONFIG_SYS_MPC83xx_USB2_OFFSET	0
@@ -679,7 +679,7 @@ typedef struct immap {
 #define CONFIG_SYS_MPC83xx_USB2_OFFSET  0x23000
 #endif
 
-#elif defined(CONFIG_MPC8313)
+#elif defined(CONFIG_ARCH_MPC8313)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -714,7 +714,7 @@ typedef struct immap {
 	u8			res7[0xC0000];
 } immap_t;
 
-#elif defined(CONFIG_MPC8308) || defined(CONFIG_MPC8315)
+#elif defined(CONFIG_ARCH_MPC8315)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -729,8 +729,8 @@ typedef struct immap {
 	gpio83xx_t		gpio[1];	/* General purpose I/O module */
 	u8			res0[0x1300];
 	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
-	fsl_i2c_t		i2c[2];		/* I2C Controllers */
-	u8			res1[0x1300];
+	fsl_i2c_t		i2c[1];		/* I2C Controllers */
+	u8			res1[0x1400];
 	duart83xx_t		duart[2];	/* DUART */
 	u8			res2[0x900];
 	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
@@ -759,7 +759,43 @@ typedef struct immap {
 	u8			res12[0x1CF00];
 } immap_t;
 
-#elif defined(CONFIG_MPC837x)
+#elif defined(CONFIG_ARCH_MPC8308)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[1];		/* Global Timers Module */
+	u8			res0[0x100];
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	gpio83xx_t		gpio[1];	/* General purpose I/O module */
+	u8			res1[0x1300];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res2[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res3[0x900];
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
+	u8			res4[0x1000];
+	spi8xxx_t		spi;		/* Serial Peripheral Interface */
+	u8			res5[0x1000];
+	pex83xx_t		pciexp[1];	/* PCI Express Controller */
+	u8			res6[0x19000];
+	usb83xx_t		usb[1];		/* USB DR Controller */
+	tsec83xx_t		tsec[2];
+	u8			res7[0x6000];
+	tdmdmac83xx_t		tdmdmac;	/* TDM DMAC */
+	sdhc83xx_t		sdhc;		/* SDHC Controller */
+	u8			res8[0xb4000];
+	serdes83xx_t		serdes[1];	/* SerDes Registers */
+	u8			res9[0x1CF00];
+} immap_t;
+
+#elif defined(CONFIG_ARCH_MPC837X)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -803,7 +839,7 @@ typedef struct immap {
 	rom83xx_t		rom;		/* On Chip ROM */
 } immap_t;
 
-#elif defined(CONFIG_MPC8360)
+#elif defined(CONFIG_ARCH_MPC8360)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -843,7 +879,7 @@ typedef struct immap {
 	u8			qe[0x100000];	/* QE block */
 } immap_t;
 
-#elif defined(CONFIG_MPC832x)
+#elif defined(CONFIG_ARCH_MPC832X)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -879,7 +915,7 @@ typedef struct immap {
 	u8			res8[0xC0000];
 	u8			qe[0x100000];	/* QE block */
 } immap_t;
-#elif defined(CONFIG_MPC8309)
+#elif defined(CONFIG_ARCH_MPC8309)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
 	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
@@ -946,7 +982,7 @@ typedef struct immap {
 #endif
 #define CONFIG_SYS_MPC83xx_USB1_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB1_OFFSET)
-#if defined(CONFIG_MPC834x)
+#if defined(CONFIG_ARCH_MPC834X)
 #define CONFIG_SYS_MPC83xx_USB2_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB2_OFFSET)
 #endif

arch/powerpc/include/asm/mpc8xxx_spi.h

@@ -10,11 +10,11 @@
 
 #include <asm/types.h>
 
-#if defined(CONFIG_MPC8308) || \
-	defined(CONFIG_MPC8313) || \
-	defined(CONFIG_MPC8315) || \
-	defined(CONFIG_MPC834x) || \
-	defined(CONFIG_MPC837x)
+#if defined(CONFIG_ARCH_MPC8308) || \
+	defined(CONFIG_ARCH_MPC8313) || \
+	defined(CONFIG_ARCH_MPC8315) || \
+	defined(CONFIG_ARCH_MPC834X) || \
+	defined(CONFIG_ARCH_MPC837X)
 
 typedef struct spi8xxx {
 	u8 res0[0x20];	/* 0x0-0x01f reserved */

arch/powerpc/include/asm/processor.h

@@ -1203,127 +1203,7 @@ int fsl_qoriq_dsp_core_to_cluster(unsigned int core);
 #endif
 #endif
 
-
-/* what kind of prep workstation we are */
-extern int _prep_type;
-/*
- * This is used to identify the board type from a given PReP board
- * vendor. Board revision is also made available.
- */
-extern unsigned char ucSystemType;
-extern unsigned char ucBoardRev;
-extern unsigned char ucBoardRevMaj, ucBoardRevMin;
-
 struct task_struct;
-void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp);
-void release_thread(struct task_struct *);
-
-/*
- * Create a new kernel thread.
- */
-extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-
-/*
- * Bus types
- */
-#define EISA_bus 0
-#define EISA_bus__is_a_macro /* for versions in ksyms.c */
-#define MCA_bus 0
-#define MCA_bus__is_a_macro /* for versions in ksyms.c */
-
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-
-/*
- * this is the minimum allowable io space due to the location
- * of the io areas on prep (first one at 0x80000000) but
- * as soon as I get around to remapping the io areas with the BATs
- * to match the mac we can raise this. -- Cort
- */
-#define TASK_SIZE	(0x80000000UL)
-
-/* This decides where the kernel will search for a free chunk of vm
- * space during mmap's.
- */
-#define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-struct thread_struct {
-	unsigned long	ksp;		/* Kernel stack pointer */
-	unsigned long	wchan;		/* Event task is sleeping on */
-	struct pt_regs	*regs;		/* Pointer to saved register state */
-	mm_segment_t	fs;		/* for get_fs() validation */
-	void		*pgdir;		/* root of page-table tree */
-	signed long	last_syscall;
-	double		fpr[32];	/* Complete floating point set */
-	unsigned long	fpscr_pad;	/* fpr ... fpscr must be contiguous */
-	unsigned long	fpscr;		/* Floating point status */
-#ifdef CONFIG_ALTIVEC
-	vector128	vr[32];		/* Complete AltiVec set */
-	vector128	vscr;		/* AltiVec status */
-	unsigned long	vrsave;
-#endif /* CONFIG_ALTIVEC */
-};
-
-#define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
-
-#define INIT_THREAD  { \
-	INIT_SP, /* ksp */ \
-	0, /* wchan */ \
-	(struct pt_regs *)INIT_SP - 1, /* regs */ \
-	KERNEL_DS, /*fs*/ \
-	swapper_pg_dir, /* pgdir */ \
-	0, /* last_syscall */ \
-	{0}, 0, 0 \
-}
-
-/*
- * Note: the vm_start and vm_end fields here should *not*
- * be in kernel space.	(Could vm_end == vm_start perhaps?)
- */
-#define INIT_MMAP { &init_mm, 0, 0x1000, NULL, \
-		    PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, \
-		    1, NULL, NULL }
-
-/*
- * Return saved PC of a blocked thread. For now, this is the "user" PC
- */
-static inline unsigned long thread_saved_pc(struct thread_struct *t)
-{
-	return (t->regs) ? t->regs->nip : 0;
-}
-
-#define copy_segments(tsk, mm)		do { } while (0)
-#define release_segments(mm)		do { } while (0)
-#define forget_segments()		do { } while (0)
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define KSTK_EIP(tsk)  ((tsk)->thread.regs->nip)
-#define KSTK_ESP(tsk)  ((tsk)->thread.regs->gpr[1])
-
-/*
- * NOTE! The task struct and the stack go together
- */
-#define THREAD_SIZE (2*PAGE_SIZE)
-#define alloc_task_struct() \
-	((struct task_struct *) __get_free_pages(GFP_KERNEL,1))
-#define free_task_struct(p)	free_pages((unsigned long)(p),1)
-#define get_task_struct(tsk)	  atomic_inc(&mem_map[MAP_NR(tsk)].count)
-
-/* in process.c - for early bootup debug -- Cort */
-int ll_printk(const char *, ...);
-void ll_puts(const char *);
-
-#define init_task	(init_task_union.task)
-#define init_stack	(init_task_union.stack)
-
-/* In misc.c */
-void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
 
 #ifndef CONFIG_CPU_MPC83XX
 int prt_83xx_rsr(void);