leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm: Remove gplugd board

Browse Source 
These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove it

Cc: Ajay Bhargav <contact@8051projects.net>
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2021-05-22 08:47:09 -04:00
parent bc08dc563e
commit dee08b1999
7 changed files with 0 additions and 277 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/Kconfig
View File

@ -530,11 +530,6 @@ config TARGET_ASPENITE
select CPU_ARM926EJS select CPU_ARM926EJS
select GPIO_EXTRA_HEADER select GPIO_EXTRA_HEADER
config TARGET_GPLUGD
bool "Support gplugd"
select CPU_ARM926EJS
select GPIO_EXTRA_HEADER
config ARCH_DAVINCI config ARCH_DAVINCI
bool "TI DaVinci" bool "TI DaVinci"
select CPU_ARM926EJS select CPU_ARM926EJS
@ -2090,7 +2085,6 @@ source "board/bosch/shc/Kconfig"
source "board/bosch/guardian/Kconfig" source "board/bosch/guardian/Kconfig"
source "board/CarMediaLab/flea3/Kconfig" source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig" source "board/Marvell/aspenite/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/Marvell/octeontx/Kconfig" source "board/Marvell/octeontx/Kconfig"
source "board/Marvell/octeontx2/Kconfig" source "board/Marvell/octeontx2/Kconfig"
source "board/armltd/vexpress64/Kconfig" source "board/armltd/vexpress64/Kconfig"

15
board/Marvell/gplugd/Kconfig
View File

@ -1,15 +0,0 @@
if TARGET_GPLUGD
config SYS_BOARD
default "gplugd"
config SYS_VENDOR
default "Marvell"
config SYS_SOC
default "armada100"
config SYS_CONFIG_NAME
default "gplugd"
endif

6
board/Marvell/gplugd/MAINTAINERS
View File

@ -1,6 +0,0 @@
GPLUGD BOARD
M: Ajay Bhargav <contact@8051projects.net>
S: Maintained
F: board/Marvell/gplugd/
F: include/configs/gplugd.h
F: configs/gplugd_defconfig

13
board/Marvell/gplugd/Makefile
View File

@ -1,13 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2011
# eInfochips Ltd. <www.einfochips.com>
# Written-by: Ajay Bhargav <contact@8051projects.net>
#
# Based on Aspenite:
# (C) Copyright 2010
# Marvell Semiconductor <www.marvell.com>
# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
# Contributor: Mahavir Jain <mjain@marvell.com>
obj-y := gplugd.o

134
board/Marvell/gplugd/gplugd.c
View File

@ -1,134 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2011
* eInfochips Ltd. <www.einfochips.com>
* Written-by: Ajay Bhargav <contact@8051projects.net>
*
* Based on Aspenite:
* (C) Copyright 2010
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
* Contributor: Mahavir Jain <mjain@marvell.com>
*/
#include <common.h>
#include <init.h>
#include <log.h>
#include <mvmfp.h>
#include <asm/arch/cpu.h>
#include <asm/arch/mfp.h>
#include <asm/arch/armada100.h>
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <miiphy.h>
#include <asm/mach-types.h>
#include <linux/delay.h>
#ifdef CONFIG_ARMADA100_FEC
#include <net.h>
#include <netdev.h>
#endif /* CONFIG_ARMADA100_FEC */
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
u32 mfp_cfg[] = {
/* I2C */
MFP105_CI2C_SDA,
MFP106_CI2C_SCL,
/* Enable Console on UART3 */
MFPO8_UART3_TXD,
MFPO9_UART3_RXD,
/* Ethernet PHY Interface */
MFP086_ETH_TXCLK,
MFP087_ETH_TXEN,
MFP088_ETH_TXDQ3,
MFP089_ETH_TXDQ2,
MFP090_ETH_TXDQ1,
MFP091_ETH_TXDQ0,
MFP092_ETH_CRS,
MFP093_ETH_COL,
MFP094_ETH_RXCLK,
MFP095_ETH_RXER,
MFP096_ETH_RXDQ3,
MFP097_ETH_RXDQ2,
MFP098_ETH_RXDQ1,
MFP099_ETH_RXDQ0,
MFP100_ETH_MDC,
MFP101_ETH_MDIO,
MFP103_ETH_RXDV,
/* SSP2 */
MFP107_SSP2_RXD,
MFP108_SSP2_TXD,
MFP110_SSP2_CS,
MFP111_SSP2_CLK,
MFP_EOC /*End of configuration*/
};
/* configure MFP's */
mfp_config(mfp_cfg);
return 0;
}
int board_init(void)
{
struct armd1apb2_registers *apb2_regs =
(struct armd1apb2_registers *)ARMD1_APBC2_BASE;
/* arch number of Board */
gd->bd->bi_arch_number = MACH_TYPE_GPLUGD;
/* adress of boot parameters */
gd->bd->bi_boot_params = armd1_sdram_base(0) + 0x100;
/* Assert PHY_RST# */
gpio_direction_output(CONFIG_SYS_GPIO_PHY_RST, GPIO_LOW);
udelay(10);
/* Deassert PHY_RST# */
gpio_set_value(CONFIG_SYS_GPIO_PHY_RST, GPIO_HIGH);
/* Enable SSP2 clock */
writel(SSP2_APBCLK | SSP2_FNCLK, &apb2_regs->ssp2_clkrst);
return 0;
}
#ifdef CONFIG_ARMADA100_FEC
int board_eth_init(struct bd_info *bis)
{
struct armd1apmu_registers *apmu_regs =
(struct armd1apmu_registers *)ARMD1_APMU_BASE;
/* Enable clock of ethernet controller */
writel(FE_CLK_RST | FE_CLK_ENA, &apmu_regs->fecrc);
return armada100_fec_register(ARMD1_FEC_BASE);
}
#ifdef CONFIG_RESET_PHY_R
/* Configure and initialize PHY chip 88E3015 */
void reset_phy(void)
{
u16 phy_adr;
const char *name = "armd-fec0";
if (miiphy_set_current_dev(name))
return;
/* command to read PHY dev address */
if (miiphy_read(name, 0xff, 0xff, &phy_adr)) {
printf("Err..%s could not read PHY dev address\n", __func__);
return;
}
/* Set Ethernet LED in TX blink mode */
miiphy_write(name, phy_adr, PHY_LED_MAN_REG, 0x00);
miiphy_write(name, phy_adr, PHY_LED_PAR_SEL_REG, PHY_LED_VAL);
/* reset the phy */
miiphy_reset(name, phy_adr);
debug("88E3015 Initialized on %s\n", name);
}
#endif /* CONFIG_RESET_PHY_R */
#endif /* CONFIG_ARMADA100_FEC */

28
configs/gplugd_defconfig
View File

@ -1,28 +0,0 @@
CONFIG_ARM=y
CONFIG_SYS_DCACHE_OFF=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_TARGET_GPLUGD=y
CONFIG_SYS_TEXT_BASE=0x00f00000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x4000
CONFIG_IDENT_STRING="\nMarvell-gplugD"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_ISO_PARTITION=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_MMC is not set
CONFIG_MII=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_OF_LIBFDT=y

75
include/configs/gplugd.h
View File

@ -1,75 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2011
* eInfochips Ltd. <www.einfochips.com>
* Written-by: Ajay Bhargav <contact@8051projects.net>
*
* Based on Aspenite:
* (C) Copyright 2010
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
* Contributor: Mahavir Jain <mjain@marvell.com>
*/
#ifndef __CONFIG_GPLUGD_H
#define __CONFIG_GPLUGD_H
/*
* High Level Configuration Options
*/
#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
#define CONFIG_ARMADA100 1 /* SOC Family Name */
#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
#define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* There is no internal RAM in ARMADA100, using DRAM
* TBD: dcache to be used for this
*/
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
/* Network configuration */
#ifdef CONFIG_CMD_NET
#define CONFIG_ARMADA100_FEC
/* DHCP Support */
#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
#endif /* CONFIG_CMD_NET */
/* GPIO Support */
#define CONFIG_MARVELL_GPIO
/* PHY configuration */
#define CONFIG_RESET_PHY_R
/* 88E3015 register definition */
#define PHY_LED_PAR_SEL_REG 22
#define PHY_LED_MAN_REG 25
#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
/* GPIO Configuration for PHY */
#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
/* Flash Support */
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
#ifdef CONFIG_SYS_NS16550_COM1
#undef CONFIG_SYS_NS16550_COM1
#endif /* CONFIG_SYS_NS16550_COM1 */
#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
/*
* Environment variables configurations
*/
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_EHCI_ARMADA100
#define CONFIG_EHCI_IS_TDI
#endif /* CONFIG_CMD_USB */
#endif /* __CONFIG_GPLUGD_H */