arm: zynq: Add mini u-boot configuration for zynq
Add configuration files/dtses for mini u-boot configurations which runs out of OCM. ram top is calculated from 0 that's why +#define CONFIG_SYS_SDRAM_BASE 0xfffc0000 +#define CONFIG_SYS_SDRAM_SIZE 0x40000 was hardcoded. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Michal Simek
parent
70ca290422
commit
dea4d2f01d
@ -126,6 +126,7 @@ dtb-$(CONFIG_ARCH_UNIPHIER_SLD8) += \
|
||||
|
||||
dtb-$(CONFIG_ARCH_ZYNQ) += \
|
||||
zynq-cc108.dtb \
|
||||
zynq-cse-qspi-single.dtb \
|
||||
zynq-microzed.dtb \
|
||||
zynq-picozed.dtb \
|
||||
zynq-syzygy-hub.dtb \
|
||||
|
||||
13
arch/arm/dts/zynq-cse-qspi-single.dts
Normal file
13
arch/arm/dts/zynq-cse-qspi-single.dts
Normal file
@ -0,0 +1,13 @@
|
||||
/*
|
||||
* Xilinx CSE QSPI single DTS
|
||||
*
|
||||
* Copyright (C) 2015 - 2017 Xilinx, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include "zynq-cse-qspi.dtsi"
|
||||
|
||||
&qspi {
|
||||
spi-rx-bus-width = <4>;
|
||||
};
|
||||
126
arch/arm/dts/zynq-cse-qspi.dtsi
Normal file
126
arch/arm/dts/zynq-cse-qspi.dtsi
Normal file
@ -0,0 +1,126 @@
|
||||
/*
|
||||
* Xilinx CSE QSPI board DTS
|
||||
*
|
||||
* Copyright (C) 2015 - 2017 Xilinx, Inc.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
model = "Zynq CSE QSPI Board";
|
||||
compatible = "xlnx,zynq-cse-qspi", "xlnx,zynq-7000";
|
||||
|
||||
aliases {
|
||||
spi0 = &qspi;
|
||||
serial0 = &dcc;
|
||||
};
|
||||
|
||||
memory@fffc0000 {
|
||||
device_type = "memory";
|
||||
reg = <0xFFFC0000 0x40000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
dcc: dcc {
|
||||
compatible = "arm,dcc";
|
||||
status = "disabled";
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
amba: amba {
|
||||
u-boot,dm-pre-reloc;
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&intc>;
|
||||
ranges;
|
||||
|
||||
intc: interrupt-controller@f8f01000 {
|
||||
compatible = "arm,cortex-a9-gic";
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0xF8F01000 0x1000>,
|
||||
<0xF8F00100 0x100>;
|
||||
};
|
||||
|
||||
qspi: spi@e000d000 {
|
||||
clock-names = "ref_clk", "pclk";
|
||||
clocks = <&clkc 10>, <&clkc 43>;
|
||||
compatible = "xlnx,zynq-qspi-1.0";
|
||||
status = "okay";
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <0 19 4>;
|
||||
reg = <0xe000d000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
num-cs = <1>;
|
||||
flash@0 {
|
||||
compatible = "n25q128a11";
|
||||
reg = <0x0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-max-frequency = <50000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
partition@qspi-fsbl-uboot {
|
||||
label = "qspi-fsbl-uboot";
|
||||
reg = <0x0 0x100000>;
|
||||
};
|
||||
partition@qspi-linux {
|
||||
label = "qspi-linux";
|
||||
reg = <0x100000 0x500000>;
|
||||
};
|
||||
partition@qspi-device-tree {
|
||||
label = "qspi-device-tree";
|
||||
reg = <0x600000 0x20000>;
|
||||
};
|
||||
partition@qspi-rootfs {
|
||||
label = "qspi-rootfs";
|
||||
reg = <0x620000 0x5E0000>;
|
||||
};
|
||||
partition@qspi-bitstream {
|
||||
label = "qspi-bitstream";
|
||||
reg = <0xC00000 0x400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
slcr: slcr@f8000000 {
|
||||
u-boot,dm-pre-reloc;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "xlnx,zynq-slcr", "syscon", "simple-bus";
|
||||
reg = <0xF8000000 0x1000>;
|
||||
ranges;
|
||||
clkc: clkc@100 {
|
||||
#clock-cells = <1>;
|
||||
compatible = "xlnx,ps7-clkc";
|
||||
fclk-enable = <0xf>;
|
||||
u-boot,dm-pre-reloc;
|
||||
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
|
||||
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
|
||||
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
|
||||
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
|
||||
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
|
||||
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
|
||||
"gem1_aper", "sdio0_aper", "sdio1_aper",
|
||||
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
|
||||
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
|
||||
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
|
||||
"dbg_trc", "dbg_apb";
|
||||
reg = <0x100 0x100>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&dcc {
|
||||
status = "okay";
|
||||
};
|
||||
1
board/xilinx/zynq/zynq-cse-qspi-single
Symbolic link
1
board/xilinx/zynq/zynq-cse-qspi-single
Symbolic link
@ -0,0 +1 @@
|
||||
zynq-zc706
|
||||
62
configs/zynq_cse_qspi_defconfig
Normal file
62
configs/zynq_cse_qspi_defconfig
Normal file
@ -0,0 +1,62 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_SYS_CONFIG_NAME="zynq_cse"
|
||||
CONFIG_ARCH_ZYNQ=y
|
||||
CONFIG_SYS_TEXT_BASE=0xFFFC0000
|
||||
# CONFIG_ZYNQ_DDRC_INIT is not set
|
||||
CONFIG_DEFAULT_DEVICE_TREE="zynq-cse-qspi-single"
|
||||
CONFIG_DEBUG_UART=y
|
||||
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
|
||||
CONFIG_BOOTDELAY=-1
|
||||
# CONFIG_DISPLAY_CPUINFO is not set
|
||||
CONFIG_SPL=y
|
||||
CONFIG_SYS_PROMPT="Zynq> "
|
||||
# CONFIG_CMD_BDI is not set
|
||||
# CONFIG_CMD_CONSOLE is not set
|
||||
# CONFIG_CMD_BOOTD is not set
|
||||
# CONFIG_CMD_BOOTM is not set
|
||||
# CONFIG_CMD_ELF is not set
|
||||
# CONFIG_CMD_FDT is not set
|
||||
# CONFIG_CMD_GO is not set
|
||||
# CONFIG_CMD_RUN is not set
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_XIMG is not set
|
||||
# CONFIG_CMD_SPL is not set
|
||||
# CONFIG_CMD_EXPORTENV is not set
|
||||
# CONFIG_CMD_IMPORTENV is not set
|
||||
# CONFIG_CMD_EDITENV is not set
|
||||
# CONFIG_CMD_SAVEENV is not set
|
||||
# CONFIG_CMD_ENV_EXISTS is not set
|
||||
# CONFIG_CMD_CRC32 is not set
|
||||
# CONFIG_CMD_CLK is not set
|
||||
# CONFIG_CMD_DM is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
# CONFIG_CMD_LOADB is not set
|
||||
# CONFIG_CMD_LOADS is not set
|
||||
CONFIG_CMD_SF=y
|
||||
# CONFIG_CMD_ECHO is not set
|
||||
# CONFIG_CMD_ITEST is not set
|
||||
# CONFIG_CMD_SOURCE is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
# CONFIG_CMD_NET is not set
|
||||
# CONFIG_CMD_NFS is not set
|
||||
# CONFIG_CMD_MISC is not set
|
||||
# CONFIG_PARTITIONS is not set
|
||||
CONFIG_OF_EMBED=y
|
||||
# CONFIG_DM_WARN is not set
|
||||
# CONFIG_DM_DEVICE_REMOVE is not set
|
||||
CONFIG_SPL_DM_SEQ_ALIAS=y
|
||||
# CONFIG_SPL_BLK is not set
|
||||
# CONFIG_ZYNQ_GPIO is not set
|
||||
# CONFIG_MMC is not set
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_BAR=y
|
||||
CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_DEBUG_UART_ARM_DCC=y
|
||||
CONFIG_DEBUG_UART_BASE=0x0
|
||||
CONFIG_DEBUG_UART_CLOCK=0
|
||||
CONFIG_ZYNQ_QSPI=y
|
||||
# CONFIG_EFI_LOADER is not set
|
||||
53
include/configs/zynq_cse.h
Normal file
53
include/configs/zynq_cse.h
Normal file
@ -0,0 +1,53 @@
|
||||
/*
|
||||
* (C) Copyright 2013 - 2017 Xilinx.
|
||||
*
|
||||
* Configuration settings for the Xilinx Zynq CSE board.
|
||||
* See zynq-common.h for Zynq common configs
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_ZYNQ_CSE_H
|
||||
#define __CONFIG_ZYNQ_CSE_H
|
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_SYS_DCACHE_OFF
|
||||
#define CONFIG_SYS_ICACHE_OFF
|
||||
|
||||
#include <configs/zynq-common.h>
|
||||
|
||||
/* Undef unneeded configs */
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#undef CONFIG_BOARD_LATE_INIT
|
||||
#undef CONFIG_BOOTCOMMAND
|
||||
#undef CONFIG_ENV_SIZE
|
||||
#undef CONFIG_CMDLINE_EDITING
|
||||
#undef CONFIG_AUTO_COMPLETE
|
||||
#undef CONFIG_ZLIB
|
||||
#undef CONFIG_GZIP
|
||||
|
||||
#undef CONFIG_SYS_LONGHELP
|
||||
|
||||
#undef CONFIG_SYS_CBSIZE
|
||||
#undef CONFIG_BOOTM_VXWORKS
|
||||
#undef CONFIG_BOOTM_LINUX
|
||||
|
||||
#define CONFIG_SYS_CBSIZE 1024
|
||||
|
||||
#define CONFIG_ENV_SIZE 400
|
||||
#undef CONFIG_SYS_INIT_RAM_ADDR
|
||||
#undef CONFIG_SYS_INIT_RAM_SIZE
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFDE000
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
|
||||
#undef CONFIG_SPL_BSS_START_ADDR
|
||||
#undef CONFIG_SPL_BSS_MAX_SIZE
|
||||
#define CONFIG_SPL_BSS_START_ADDR 0x20000
|
||||
#define CONFIG_SPL_BSS_MAX_SIZE 0x8000
|
||||
|
||||
#undef CONFIG_SYS_MALLOC_LEN
|
||||
#define CONFIG_SYS_MALLOC_LEN 0x1000
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE 0xfffc0000
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x40000
|
||||
|
||||
#endif /* __CONFIG_ZYNQ_CSE_H */
|
||||
Loading…
Reference in New Issue
Block a user