drivers: net: driver for MDIO muxes controlled over I2C

This driver is used for MDIO muxes driven over I2C.  This is currently
used on Freescale LS1028A QDS board, on which the physical MDIO MUX is
controlled by an on-board FPGA which in turn is configured through I2C.

Signed-off-by: Alex Marginean <alexm.osslist@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
This commit is contained in:
Alex Marginean authored and Joe Hershberger committed 2019-07-25 13:13:30 -05:00
1 parent 5dce9df0e9
commit d9a9174fa5
2 files changed
+9

No files matched your search

+8
View File
@@ -595,4 +595,12 @@ config FSL_ENETC
This driver supports the NXP ENETC Ethernet controller found on some
of the NXP SoCs.
config MDIO_MUX_I2CREG
bool "MDIO MUX accessed as a register over I2C"
depends on DM_MDIO_MUX && DM_I2C
help
This driver is used for MDIO muxes driven by writing to a register of
an I2C chip. The board it was developed for uses a mux controlled by
on-board FPGA which in turn is accessed as a chip over I2C.
endif # NETDEVICES
+1
View File
@@ -37,6 +37,7 @@ obj-$(CONFIG_LAN91C96) += lan91c96.o
obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
obj-$(CONFIG_MDIO_MUX_I2CREG) += mdio_mux_i2creg.o
obj-$(CONFIG_MDIO_MUX_SANDBOX) += mdio_mux_sandbox.o
obj-$(CONFIG_MPC8XX_FEC) += mpc8xx_fec.o
obj-$(CONFIG_MT7628_ETH) += mt7628-eth.o