net: rtl8139: Read HW address from EEPROM only on probe

Do not re-read the HW address from the EEPROM on every start of
transfer, otherwise the user will not be able to adjust ethaddr
as needed. Read the address only once, when the card is detected.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Marek Vasut 2020-05-09 22:34:43 +02:00 committed by Tom Rini
parent 2df3a51510
commit d8afb8b28e

View File

@ -502,17 +502,11 @@ static int rtl8139_free_pkt_common(struct rtl8139_priv *priv, unsigned int len)
static int rtl8139_init_common(struct rtl8139_priv *priv)
{
unsigned short *ap = (unsigned short *)priv->enetaddr;
int addr_len, i;
u8 reg;
/* Bring the chip out of low-power mode. */
outb(0x00, priv->ioaddr + RTL_REG_CONFIG1);
addr_len = rtl8139_read_eeprom(priv, 0, 8) == 0x8129 ? 8 : 6;
for (i = 0; i < 3; i++)
*ap++ = le16_to_cpu(rtl8139_read_eeprom(priv, i + 7, addr_len));
rtl8139_reset(priv);
reg = inb(priv->ioaddr + RTL_REG_MEDIASTATUS);
@ -521,9 +515,6 @@ static int rtl8139_init_common(struct rtl8139_priv *priv)
return -1;
}
/* Non-DM compatibility */
memcpy(priv->dev.enetaddr, priv->enetaddr, 6);
return 0;
}
@ -532,6 +523,19 @@ static void rtl8139_stop_common(struct rtl8139_priv *priv)
rtl8139_hw_reset(priv);
}
static void rtl8139_get_hwaddr(struct rtl8139_priv *priv)
{
unsigned short *ap = (unsigned short *)priv->enetaddr;
int i, addr_len;
/* Bring the chip out of low-power mode. */
outb(0x00, priv->ioaddr + RTL_REG_CONFIG1);
addr_len = rtl8139_read_eeprom(priv, 0, 8) == 0x8129 ? 8 : 6;
for (i = 0; i < 3; i++)
*ap++ = le16_to_cpu(rtl8139_read_eeprom(priv, i + 7, addr_len));
}
static void rtl8139_name(char *str, int card_number)
{
sprintf(str, "RTL8139#%u", card_number);
@ -626,6 +630,11 @@ int rtl8139_initialize(bd_t *bis)
dev->recv = rtl8139_recv;
dev->mcast = rtl8139_bcast_addr;
rtl8139_get_hwaddr(priv);
/* Non-DM compatibility */
memcpy(priv->dev.enetaddr, priv->enetaddr, 6);
eth_register(dev);
card_number++;