x86: broadwell: Add a SATA driver
Add a SATA driver for broadwell. This supports connecting an SSD and the usual U-Boot commands to read and write data. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
This commit is contained in:
Simon Glass
Bin Meng
parent
b24f5c4f27
commit
d2c29d9a2c
@ -8,3 +8,4 @@ obj-y += cpu.o
|
||||
obj-y += iobp.o
|
||||
obj-y += pch.o
|
||||
obj-y += pinctrl_broadwell.o
|
||||
obj-y += sata.o
|
||||
|
||||
269
arch/x86/cpu/broadwell/sata.c
Normal file
269
arch/x86/cpu/broadwell/sata.c
Normal file
@ -0,0 +1,269 @@
|
||||
/*
|
||||
* Copyright (c) 2016 Google, Inc
|
||||
*
|
||||
* From coreboot src/soc/intel/broadwell/sata.c
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/intel_regs.h>
|
||||
#include <asm/lpc_common.h>
|
||||
#include <asm/pch_common.h>
|
||||
#include <asm/pch_common.h>
|
||||
#include <asm/arch/pch.h>
|
||||
|
||||
struct sata_platdata {
|
||||
int port_map;
|
||||
uint port0_gen3_tx;
|
||||
uint port1_gen3_tx;
|
||||
uint port0_gen3_dtle;
|
||||
uint port1_gen3_dtle;
|
||||
|
||||
/*
|
||||
* SATA DEVSLP Mux
|
||||
* 0 = port 0 DEVSLP on DEVSLP0/GPIO33
|
||||
* 1 = port 3 DEVSLP on DEVSLP0/GPIO33
|
||||
*/
|
||||
int devslp_mux;
|
||||
|
||||
/*
|
||||
* DEVSLP Disable
|
||||
* 0: DEVSLP is enabled
|
||||
* 1: DEVSLP is disabled
|
||||
*/
|
||||
int devslp_disable;
|
||||
};
|
||||
|
||||
static void broadwell_sata_init(struct udevice *dev)
|
||||
{
|
||||
struct sata_platdata *plat = dev_get_platdata(dev);
|
||||
u32 reg32;
|
||||
u8 *abar;
|
||||
u16 reg16;
|
||||
int port;
|
||||
|
||||
debug("SATA: Initializing controller in AHCI mode.\n");
|
||||
|
||||
/* Set timings */
|
||||
dm_pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE);
|
||||
dm_pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE);
|
||||
|
||||
/* for AHCI, Port Enable is managed in memory mapped space */
|
||||
dm_pci_read_config16(dev, 0x92, ®16);
|
||||
reg16 &= ~0xf;
|
||||
reg16 |= 0x8000 | plat->port_map;
|
||||
dm_pci_write_config16(dev, 0x92, reg16);
|
||||
udelay(2);
|
||||
|
||||
/* Setup register 98h */
|
||||
dm_pci_read_config32(dev, 0x98, ®32);
|
||||
reg32 &= ~((1 << 31) | (1 << 30));
|
||||
reg32 |= 1 << 23;
|
||||
reg32 |= 1 << 24; /* Enable MPHY Dynamic Power Gating */
|
||||
dm_pci_write_config32(dev, 0x98, reg32);
|
||||
|
||||
/* Setup register 9Ch */
|
||||
reg16 = 0; /* Disable alternate ID */
|
||||
reg16 = 1 << 5; /* BWG step 12 */
|
||||
dm_pci_write_config16(dev, 0x9c, reg16);
|
||||
|
||||
/* SATA Initialization register */
|
||||
reg32 = 0x183;
|
||||
reg32 |= (plat->port_map ^ 0xf) << 24;
|
||||
reg32 |= (plat->devslp_mux & 1) << 15;
|
||||
dm_pci_write_config32(dev, 0x94, reg32);
|
||||
|
||||
/* Initialize AHCI memory-mapped space */
|
||||
dm_pci_read_config32(dev, PCI_BASE_ADDRESS_5, ®32);
|
||||
abar = (u8 *)reg32;
|
||||
debug("ABAR: %p\n", abar);
|
||||
|
||||
/* CAP (HBA Capabilities) : enable power management */
|
||||
clrsetbits_le32(abar + 0x00, 0x00020060 /* SXS+EMS+PMS */,
|
||||
0x0c006000 /* PSC+SSC+SALP+SSS */ |
|
||||
1 << 18); /* SAM: SATA AHCI MODE ONLY */
|
||||
|
||||
/* PI (Ports implemented) */
|
||||
writel(plat->port_map, abar + 0x0c);
|
||||
(void) readl(abar + 0x0c); /* Read back 1 */
|
||||
(void) readl(abar + 0x0c); /* Read back 2 */
|
||||
|
||||
/* CAP2 (HBA Capabilities Extended)*/
|
||||
if (plat->devslp_disable) {
|
||||
clrbits_le32(abar + 0x24, 1 << 3);
|
||||
} else {
|
||||
/* Enable DEVSLP */
|
||||
setbits_le32(abar + 0x24, 1 << 5 | 1 << 4 | 1 << 3 | 1 << 2);
|
||||
|
||||
for (port = 0; port < 4; port++) {
|
||||
if (!(plat->port_map & (1 << port)))
|
||||
continue;
|
||||
/* DEVSLP DSP */
|
||||
setbits_le32(abar + 0x144 + (0x80 * port), 1 << 1);
|
||||
}
|
||||
}
|
||||
|
||||
/* Static Power Gating for unused ports */
|
||||
reg32 = readl(RCB_REG(0x3a84));
|
||||
/* Port 3 and 2 disabled */
|
||||
if ((plat->port_map & ((1 << 3)|(1 << 2))) == 0)
|
||||
reg32 |= (1 << 24) | (1 << 26);
|
||||
/* Port 1 and 0 disabled */
|
||||
if ((plat->port_map & ((1 << 1)|(1 << 0))) == 0)
|
||||
reg32 |= (1 << 20) | (1 << 18);
|
||||
writel(reg32, RCB_REG(0x3a84));
|
||||
|
||||
/* Set Gen3 Transmitter settings if needed */
|
||||
if (plat->port0_gen3_tx)
|
||||
pch_iobp_update(SATA_IOBP_SP0_SECRT88,
|
||||
~(SATA_SECRT88_VADJ_MASK <<
|
||||
SATA_SECRT88_VADJ_SHIFT),
|
||||
(plat->port0_gen3_tx &
|
||||
SATA_SECRT88_VADJ_MASK)
|
||||
<< SATA_SECRT88_VADJ_SHIFT);
|
||||
|
||||
if (plat->port1_gen3_tx)
|
||||
pch_iobp_update(SATA_IOBP_SP1_SECRT88,
|
||||
~(SATA_SECRT88_VADJ_MASK <<
|
||||
SATA_SECRT88_VADJ_SHIFT),
|
||||
(plat->port1_gen3_tx &
|
||||
SATA_SECRT88_VADJ_MASK)
|
||||
<< SATA_SECRT88_VADJ_SHIFT);
|
||||
|
||||
/* Set Gen3 DTLE DATA / EDGE registers if needed */
|
||||
if (plat->port0_gen3_dtle) {
|
||||
pch_iobp_update(SATA_IOBP_SP0DTLE_DATA,
|
||||
~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
|
||||
(plat->port0_gen3_dtle & SATA_DTLE_MASK)
|
||||
<< SATA_DTLE_DATA_SHIFT);
|
||||
|
||||
pch_iobp_update(SATA_IOBP_SP0DTLE_EDGE,
|
||||
~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
|
||||
(plat->port0_gen3_dtle & SATA_DTLE_MASK)
|
||||
<< SATA_DTLE_EDGE_SHIFT);
|
||||
}
|
||||
|
||||
if (plat->port1_gen3_dtle) {
|
||||
pch_iobp_update(SATA_IOBP_SP1DTLE_DATA,
|
||||
~(SATA_DTLE_MASK << SATA_DTLE_DATA_SHIFT),
|
||||
(plat->port1_gen3_dtle & SATA_DTLE_MASK)
|
||||
<< SATA_DTLE_DATA_SHIFT);
|
||||
|
||||
pch_iobp_update(SATA_IOBP_SP1DTLE_EDGE,
|
||||
~(SATA_DTLE_MASK << SATA_DTLE_EDGE_SHIFT),
|
||||
(plat->port1_gen3_dtle & SATA_DTLE_MASK)
|
||||
<< SATA_DTLE_EDGE_SHIFT);
|
||||
}
|
||||
|
||||
/*
|
||||
* Additional Programming Requirements for Power Optimizer
|
||||
*/
|
||||
|
||||
/* Step 1 */
|
||||
pch_common_sir_write(dev, 0x64, 0x883c9003);
|
||||
|
||||
/* Step 2: SIR 68h[15:0] = 880Ah */
|
||||
reg32 = pch_common_sir_read(dev, 0x68);
|
||||
reg32 &= 0xffff0000;
|
||||
reg32 |= 0x880a;
|
||||
pch_common_sir_write(dev, 0x68, reg32);
|
||||
|
||||
/* Step 3: SIR 60h[3] = 1 */
|
||||
reg32 = pch_common_sir_read(dev, 0x60);
|
||||
reg32 |= (1 << 3);
|
||||
pch_common_sir_write(dev, 0x60, reg32);
|
||||
|
||||
/* Step 4: SIR 60h[0] = 1 */
|
||||
reg32 = pch_common_sir_read(dev, 0x60);
|
||||
reg32 |= (1 << 0);
|
||||
pch_common_sir_write(dev, 0x60, reg32);
|
||||
|
||||
/* Step 5: SIR 60h[1] = 1 */
|
||||
reg32 = pch_common_sir_read(dev, 0x60);
|
||||
reg32 |= (1 << 1);
|
||||
pch_common_sir_write(dev, 0x60, reg32);
|
||||
|
||||
/* Clock Gating */
|
||||
pch_common_sir_write(dev, 0x70, 0x3f00bf1f);
|
||||
pch_common_sir_write(dev, 0x54, 0xcf000f0f);
|
||||
pch_common_sir_write(dev, 0x58, 0x00190000);
|
||||
clrsetbits_le32(RCB_REG(0x333c), 0x00300000, 0x00c00000);
|
||||
|
||||
dm_pci_read_config32(dev, 0x300, ®32);
|
||||
reg32 |= 1 << 17 | 1 << 16 | 1 << 19;
|
||||
reg32 |= 1 << 31 | 1 << 30 | 1 << 29;
|
||||
dm_pci_write_config32(dev, 0x300, reg32);
|
||||
|
||||
dm_pci_read_config32(dev, 0x98, ®32);
|
||||
reg32 |= 1 << 29;
|
||||
dm_pci_write_config32(dev, 0x98, reg32);
|
||||
|
||||
/* Register Lock */
|
||||
dm_pci_read_config32(dev, 0x9c, ®32);
|
||||
reg32 |= 1 << 31;
|
||||
dm_pci_write_config32(dev, 0x9c, reg32);
|
||||
}
|
||||
|
||||
static int broadwell_sata_enable(struct udevice *dev)
|
||||
{
|
||||
struct sata_platdata *plat = dev_get_platdata(dev);
|
||||
struct gpio_desc desc;
|
||||
u16 map;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Set SATA controller mode early so the resource allocator can
|
||||
* properly assign IO/Memory resources for the controller.
|
||||
*/
|
||||
map = 0x0060;
|
||||
|
||||
map |= (plat->port_map ^ 0x3f) << 8;
|
||||
dm_pci_write_config16(dev, 0x90, map);
|
||||
|
||||
ret = gpio_request_by_name(dev, "reset-gpio", 0, &desc, GPIOD_IS_OUT);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int broadwell_sata_ofdata_to_platdata(struct udevice *dev)
|
||||
{
|
||||
struct sata_platdata *plat = dev_get_platdata(dev);
|
||||
const void *blob = gd->fdt_blob;
|
||||
int node = dev->of_offset;
|
||||
|
||||
plat->port_map = fdtdec_get_int(blob, node, "intel,sata-port-map", 0);
|
||||
plat->port0_gen3_tx = fdtdec_get_int(blob, node,
|
||||
"intel,sata-port0-gen3-tx", 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int broadwell_sata_probe(struct udevice *dev)
|
||||
{
|
||||
if (!(gd->flags & GD_FLG_RELOC))
|
||||
return broadwell_sata_enable(dev);
|
||||
else
|
||||
broadwell_sata_init(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct udevice_id broadwell_ahci_ids[] = {
|
||||
{ .compatible = "intel,wildcatpoint-ahci" },
|
||||
{ }
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(ahci_broadwell_drv) = {
|
||||
.name = "ahci_broadwell",
|
||||
.id = UCLASS_DISK,
|
||||
.of_match = broadwell_ahci_ids,
|
||||
.ofdata_to_platdata = broadwell_sata_ofdata_to_platdata,
|
||||
.probe = broadwell_sata_probe,
|
||||
.platdata_auto_alloc_size = sizeof(struct sata_platdata),
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user