leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Bring yucca config more in line with other AMCC boards.

Browse Source
This commit is contained in:
Wolfgang Denk 2006-07-05 10:42:14 +02:00
parent 0095b787fe
commit caaeaf925f
2 changed files with 37 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
CHANGELOG
View File

@ -2,6 +2,8 @@
Changes since U-Boot 1.1.4:
======================================================================
* Bring yucca config more in line with other AMCC boards.
* Add AMCC bamboo board to MAKEALL build script.
* Fix AMCC bamboo eval board compilation errors.

66
include/configs/yucca.h
View File

@ -152,29 +152,13 @@
#undef CFG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_BOOTARGS "console=ttyS0,115200n8 root=/dev/nfs rw"
#define CONFIG_BOOTCOMMAND "bootm E7C00000" /* autoboot command */
#define CONFIG_BOOTDELAY -1 /* -1 to disable autoboot */
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
#undef CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_HAS_ETH0
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_RESET_DELAY 1000
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_NETMASK 255.255.0.0
#define CONFIG_IPADDR 192.168.80.10
#define CONFIG_ETHADDR 00:04:AC:01:CA:FE
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SERVERIP 192.168.1.1
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
"loads_echo=1\0" \
"netdev=eth0\0" \
"hostname=yucca\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
@ -190,7 +174,7 @@
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
"bootm\0" \
"rootpath=/opt/eldk-4.0/ppc_4xx\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=yucca/uImage\0" \
"kernel_addr=E7F10000\0" \
"ramdisk_addr=E7F20000\0" \
@ -200,22 +184,42 @@
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_PCI | \
CFG_CMD_IRQ | \
CFG_CMD_I2C | \
CFG_CMD_DHCP | \
CFG_CMD_PING | \
CFG_CMD_DIAG | \
CFG_CMD_NET | \
CFG_CMD_MII | \
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF )
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ELF | \
CFG_CMD_I2C | \
CFG_CMD_IRQ | \
CFG_CMD_MII | \
CFG_CMD_NET | \
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
CFG_CMD_REGINFO | \
CFG_CMD_SDRAM )
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
#define CONFIG_MII 1 /* MII PHY management */
#undef CONFIG_NET_MULTI
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_HAS_ETH0
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_RESET_DELAY 1000
#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*