Patch by Detlev Zundel, 14 Mar 2005:

NC650: changed NAND flash addressing to using UPMB
This commit is contained in:
wdenk 2005-03-14 23:01:03 +00:00
parent a0bdf49e39
commit c3fafecff1
3 changed files with 51 additions and 6 deletions

View File

@ -2,7 +2,10 @@
Changes for U-Boot 1.1.3:
======================================================================
* Patch by Stefan Roese, 14 March 2005:
* Patch by Detlev Zundel, 14 Mar 2005:
NC650: changed NAND flash addressing to using UPMB
* Patch by Stefan Roese, 14 Mar 2005:
Update for esd voh405 fpga image
* INKA4x0: Allow initialization of LCD backlight dimming from
@ -10,7 +13,7 @@ Changes for U-Boot 1.1.3:
* Add port initialization for digital I/O on INKA4x0
* Patch by Stefan Roese, 01 March 2005:
* Patch by Stefan Roese, 01 Mar 2005:
Update for esd boards dp405 and hub405
* Fix get_partition_info() parameter error in all other calls
@ -18,7 +21,7 @@ Changes for U-Boot 1.1.3:
* Enable USB and IDE support for INKA4x0 board
* Patch by Andrew Dyer, 28 February 2005:
* Patch by Andrew Dyer, 28 Feb 2005:
fix ext2load passing an incorrect pointer to get_partition_info()
resulting in load failure for devices other than 0

View File

@ -70,6 +70,36 @@ const uint sdram_table[] = {
0x7ffffc07, _not_used_, _not_used_, _not_used_
};
const uint nand_flash_table[] = {
/* single read. (offset 0 in upm RAM) */
0x0ff3fc04, 0x0ff3fc04, 0x0ff3fc04, 0x0ffffc04,
0xfffffc00, 0xfffffc05, 0xfffffc05, 0xfffffc05,
/* burst read. (offset 8 in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
/* single write. (offset 18 in upm RAM) */
0x00fffc04, 0x00fffc04, 0x00fffc04, 0x0ffffc04,
0x0ffffc84, 0x0ffffc84, 0xfffffc00, 0xfffffc05,
/* burst write. (offset 20 in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
/* refresh. (offset 30 in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
/* exception. (offset 3c in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05
};
/* ------------------------------------------------------------------------- */
/*
@ -182,6 +212,12 @@ long int initdram (int board_type)
udelay (10000);
/* Configure UPMB for NAND flash access */
upmconfig (UPMB, (uint *) nand_flash_table,
sizeof (nand_flash_table) / sizeof (uint));
memctl->memc_mbmr = CFG_MBMR_NAND;
return (size_b0);
}

View File

@ -309,7 +309,7 @@
#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V)
/*
* BR2 and OR2 (NAND Flash)
* BR2 and OR2 (NAND Flash) - now addressed through UPMB
*/
#define CFG_NAND_BASE 0x50000000
#define CFG_NAND_SIZE 0x04000000
@ -317,8 +317,8 @@
#define CFG_OR_TIMING_NAND (OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
OR_SCY_15_CLK | OR_EHTR | OR_TRLX)
#define CFG_BR2_PRELIM ((CFG_NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_V )
#define CFG_OR2_PRELIM (((-CFG_NAND_SIZE) & OR_AM_MSK) | CFG_OR_TIMING_NAND)
#define CFG_BR2_PRELIM ((CFG_NAND_BASE & BR_BA_MSK) | BR_PS_8 | BR_MS_UPMB | BR_V )
#define CFG_OR2_PRELIM (((-CFG_NAND_SIZE) & OR_AM_MSK) | OR_BI )
/*
* BR3 and OR3 (SDRAM)
@ -382,6 +382,12 @@
MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
/*
* MBMR settings for NAND flash
*/
#define CFG_MBMR_NAND ( MBMR_WLFB_5X )
/*
* Internal Definitions
*