leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

spi: ti_qspi: Add delay before xfer for am43xx

Browse Source 
Without this delay, write/read is failing.
Looks like, the WIP always remain set and hence a timeout
occurs leading to the error.

Without this patch, device does not get probed also.
Here is the log.

U-Boot#
U-Boot#
U-Boot#
U-Boot# sf probe 0
SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
Failed to initialize SPI flash at 0:0
U-Boot# sf probe 0

While with this patch, log is
U-Boot# sf probe 0
SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB, mapped at 30000000
U-Boot# sf erase 0 0x80000
SF: 524288 bytes @ 0x0 Erased: OK
U-Boot# mw 81000000 0xdededede 0x40000
U-Boot# sf write 81000000 0 0x40000
SF: 262144 bytes @ 0x0 Written: OK
U-Boot# sf read 82000000 0 0x40000
SF: 262144 bytes @ 0x0 Read: OK
U-Boot# md 0x82000000

Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
This commit is contained in:
Sourav Poddar 2013-12-21 12:50:10 +05:30 committed by Jagannadha Sutradharudu Teki
parent 570533b820
commit bb7cd0ddf9
1 changed files with 7 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
drivers/spi/ti_qspi.c
View File

@ -285,6 +285,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
qslave->cmd |= QSPI_3_PIN;
qslave->cmd |= 0xfff;
/* FIXME: This delay is required for successfull
* completion of read/write/erase. Once its root
* caused, it will be remove from the driver.
*/
#ifdef CONFIG_AM43XX
udelay(100);
#endif
while (words--) {
if (txp) {
debug("tx cmd %08x dc %08x data %02x\n",