leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Convert CONFIG_ENV_IS_IN_FAT to Kconfig

Browse Source 
This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_FAT

Signed-off-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Simon Glass 2017-07-23 21:19:47 -06:00 committed by Tom Rini
parent 337cd3f211
commit b31e065f89
51 changed files with 67 additions and 61 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
README
View File

@ -3422,19 +3422,6 @@ environment in RAM: we could work on NVRAM directly, but we want to
keep settings there always unmodified except somebody uses "saveenv"
to save the current settings.
- CONFIG_ENV_IS_IN_REMOTE:
Define this if you have a remote memory space which you
want to use for the local device's environment.
- CONFIG_ENV_ADDR:
- CONFIG_ENV_SIZE:
These two #defines specify the address and size of the
environment area within the remote memory space. The
local device can get the environment from remote memory
space by SRIO or PCIE links.
BE CAREFUL! For some special cases, the local device can not use
"saveenv" command. For example, the local device will get the
environment stored in a remote NOR flash by SRIO or PCIE link,
@ -3446,37 +3433,6 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
environment. If redundant environment is used, it will be copied to
CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
- CONFIG_ENV_IS_IN_FAT:
Define this if you want to use the FAT file system for the environment.
- FAT_ENV_INTERFACE:
Define this to a string that is the name of the block device.
- FAT_ENV_DEVICE_AND_PART:
Define this to a string to specify the partition of the device. It can
be as following:
"D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
- "D:P": device D partition P. Error occurs if device D has no
partition table.
- "D:0": device D.
- "D" or "D:": device D partition 1 if device D has partition
table, or the whole device D if has no partition
table.
- "D:auto": first partition in device D with bootable flag set.
If none, first valid partition in device D. If no
partition table then means device D.
- FAT_ENV_FILE:
It's a string of the FAT file name. This file use to store the
environment.
- CONFIG_FAT_WRITE:
This must be enabled. Otherwise it cannot save the environment file.
Please note that the environment is read-only until the monitor
has been relocated to RAM and a RAM copy of the environment has been
created; also, when using EEPROM you will have to use getenv_f()

1
arch/arm/Kconfig
View File

@ -488,6 +488,7 @@ config ARCH_BCM283X
select DM_GPIO
select OF_CONTROL
imply FAT_WRITE
imply ENV_IS_IN_FAT
config TARGET_VEXPRESS_CA15_TC2
bool "Support vexpress_ca15_tc2"

34
common/Kconfig
View File

@ -252,6 +252,40 @@ config ENV_IS_IN_EEPROM
EEPROM which holds the environment, is reached over
a pca9547 i2c mux with address 0x70, channel 3.
config ENV_IS_IN_FAT
bool "Environment is in a FAT filesystem"
depends on !CHAIN_OF_TRUST
help
Define this if you want to use the FAT file system for the environment.
- FAT_ENV_INTERFACE:
Define this to a string that is the name of the block device.
- FAT_ENV_DEVICE_AND_PART:
Define this to a string to specify the partition of the device. It can
be as following:
"D:P", "D:0", "D", "D:" or "D:auto" (D, P are integers. And P >= 1)
- "D:P": device D partition P. Error occurs if device D has no
partition table.
- "D:0": device D.
- "D" or "D:": device D partition 1 if device D has partition
table, or the whole device D if has no partition
table.
- "D:auto": first partition in device D with bootable flag set.
If none, first valid partition in device D. If no
partition table then means device D.
- FAT_ENV_FILE:
It's a string of the FAT file name. This file use to store the
environment.
- CONFIG_FAT_WRITE:
This must be enabled. Otherwise it cannot save the environment file.
config ENV_IS_IN_FLASH
bool "Environment in flash memory"
depends on !CHAIN_OF_TRUST

1
configs/am335x_evm_defconfig
View File

@ -7,6 +7,7 @@ CONFIG_DEFAULT_DEVICE_TREE="am335x-evm"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y

1
configs/am335x_evm_nor_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_NOR=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y

1
configs/am335x_evm_usbspl_defconfig
View File

@ -6,6 +6,7 @@ CONFIG_AM33XX=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y

1
configs/am335x_hs_evm_defconfig
View File

@ -12,6 +12,7 @@ CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_ARCH_MISC_INIT=y

1
configs/am43xx_evm_defconfig
View File

@ -7,6 +7,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y

1
configs/am43xx_evm_ethboot_defconfig
View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_AM43XX=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y

1
configs/am43xx_evm_usbhost_boot_defconfig
View File

@ -7,6 +7,7 @@ CONFIG_SPL_STACK_R_ADDR=0x82000000
CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
CONFIG_SPL_LOAD_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y

1
configs/am43xx_hs_evm_defconfig
View File

@ -15,6 +15,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1,NAND"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL=y

1
configs/at91sam9m10g45ek_mmc_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_DEFAULT_DEVICE_TREE="at91sam9m10g45ek"
CONFIG_DEBUG_UART=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/at91sam9n12ek_mmc_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_DEFAULT_DEVICE_TREE="at91sam9n12ek"
CONFIG_DEBUG_UART=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/at91sam9rlek_mmc_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_DEFAULT_DEVICE_TREE="at91sam9rlek"
CONFIG_DEBUG_UART=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/at91sam9x5ek_mmc_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_DEFAULT_DEVICE_TREE="at91sam9g35ek"
CONFIG_DEBUG_UART=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/axs101_defconfig
View File

@ -3,6 +3,7 @@ CONFIG_TARGET_AXS101=y
CONFIG_SYS_TEXT_BASE=0x81000000
CONFIG_SYS_CLK_FREQ=750000000
CONFIG_DEFAULT_DEVICE_TREE="axs101"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="AXS# "

1
configs/axs103_defconfig
View File

@ -3,6 +3,7 @@ CONFIG_ISA_ARCV2=y
CONFIG_SYS_TEXT_BASE=0x81000000
CONFIG_SYS_CLK_FREQ=100000000
CONFIG_DEFAULT_DEVICE_TREE="axs103"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="AXS# "

1
configs/hikey_defconfig
View File

@ -3,6 +3,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING="hikey"
CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ENV_IS_IN_FAT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y

1
configs/hsdk_defconfig
View File

@ -4,6 +4,7 @@ CONFIG_TARGET_HSDK=y
CONFIG_SYS_TEXT_BASE=0x81000000
CONFIG_SYS_CLK_FREQ=1000000000
CONFIG_DEFAULT_DEVICE_TREE="hsdk"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_PROMPT="hsdk# "
# CONFIG_CMD_IMLS is not set

1
configs/k2g_evm_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm"
CONFIG_OF_BOARD_SETUP=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DTB_RESELECT=y
CONFIG_FIT_EMBED=y

1
configs/k2g_hs_evm_defconfig
View File

@ -5,6 +5,7 @@ CONFIG_TI_COMMON_CMD_OPTIONS=y
CONFIG_TARGET_K2G_EVM=y
CONFIG_DEFAULT_DEVICE_TREE="keystone-k2g-evm"
CONFIG_OF_BOARD_SETUP=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y
CONFIG_HUSH_PARSER=y

1
configs/omap4_panda_defconfig
View File

@ -4,6 +4,7 @@ CONFIG_OMAP44XX=y
CONFIG_TARGET_OMAP4_PANDA=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_VERSION_VARIABLE=y

1
configs/picosam9g45_defconfig
View File

@ -10,6 +10,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL_FAT_SUPPORT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/sama5d2_xplained_mmc_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/sama5d36ek_cmp_mmc_defconfig
View File

@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek_cmp"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/sama5d3_xplained_mmc_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/sama5d3xek_mmc_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sama5d36ek"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/sama5d4_xplained_mmc_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4_xplained"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/sama5d4ek_mmc_defconfig
View File

@ -14,6 +14,7 @@ CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d4ek"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
CONFIG_ENV_IS_IN_FAT=y
CONFIG_BOOTDELAY=3
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y

1
configs/xilinx_zynqmp_ep_defconfig
View File

@ -11,6 +11,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_IS_IN_FAT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
View File

@ -12,6 +12,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_IS_IN_FAT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_IS_IN_FAT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
View File

@ -9,6 +9,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_IS_IN_FAT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/xilinx_zynqmp_zcu102_defconfig
View File

@ -12,6 +12,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_IS_IN_FAT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
configs/xilinx_zynqmp_zcu102_revB_defconfig
View File

@ -12,6 +12,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_IS_IN_FAT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL=y

1
include/configs/am335x_evm.h
View File

@ -353,7 +353,6 @@
#define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#elif !defined(CONFIG_ENV_IS_NOWHERE)
/* Not NAND, SPI, NOR or eMMC env, so put ENV in a file on FAT */
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"

2
include/configs/am43xx_evm.h
View File

@ -71,7 +71,6 @@
/* NS16550 Configuration */
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"
@ -127,7 +126,6 @@
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE CONFIG_ISW_ENTRY_ADDR
#endif
#undef CONFIG_ENV_IS_IN_FAT
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */

1
include/configs/at91-sama5_common.h
View File

@ -53,7 +53,6 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#else
/* u-boot env in sd/mmc card */
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0"
#define FAT_ENV_FILE "uboot.env"

1
include/configs/at91sam9m10g45ek.h
View File

@ -113,7 +113,6 @@
*/
#define FAT_ENV_DEVICE_AND_PART "0"
#define FAT_ENV_FILE "uboot.env"
#define CONFIG_ENV_IS_IN_FAT
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \

1
include/configs/at91sam9n12ek.h
View File

@ -156,7 +156,6 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#else
/* Use file in FAT file to save environment */
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"

1
include/configs/at91sam9rlek.h
View File

@ -124,7 +124,6 @@
#else /* CONFIG_SYS_USE_MMC */
/* bootstrap + u-boot + env + linux in mmc */
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"

1
include/configs/at91sam9x5ek.h
View File

@ -139,7 +139,6 @@
"bootm 0x22000000"
#else /* CONFIG_SYS_USE_MMC */
/* bootstrap + u-boot + env + linux in mmc */
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_FILE "uboot.env"
#define FAT_ENV_DEVICE_AND_PART "0"

1
include/configs/axs10x.h
View File

@ -75,7 +75,6 @@
/*
* Environment settings
*/
#define CONFIG_ENV_IS_IN_FAT
#define CONFIG_ENV_SIZE SZ_16K
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"

1
include/configs/hikey.h
View File

@ -106,7 +106,6 @@
/* Preserve environment on sd card */
#define CONFIG_ENV_SIZE 0x1000
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "1:1"
#define FAT_ENV_FILE "uboot.env"

1
include/configs/hsdk.h
View File

@ -60,7 +60,6 @@
* Environment settings
*/
#define CONFIG_ENV_SIZE SZ_16K
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"

1
include/configs/k2g_evm.h
View File

@ -70,7 +70,6 @@
#define CONFIG_PHY_MICREL
#define PHY_ANEG_TIMEOUT 10000 /* PHY needs longer aneg time */
#define CONFIG_ENV_IS_IN_FAT
#define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"

1
include/configs/omap4_panda.h
View File

@ -35,7 +35,6 @@
/* ENV related config options */
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"

1
include/configs/picosam9g45.h
View File

@ -115,7 +115,6 @@
*/
#define FAT_ENV_DEVICE_AND_PART "0"
#define FAT_ENV_FILE "uboot.env"
#define CONFIG_ENV_IS_IN_FAT
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTARGS "console=ttyS0,115200 " \

1
include/configs/rpi.h
View File

@ -92,7 +92,6 @@
/* Environment */
#define CONFIG_ENV_SIZE SZ_16K
#define CONFIG_ENV_IS_IN_FAT
#define FAT_ENV_INTERFACE "mmc"
#define FAT_ENV_DEVICE_AND_PART "0:1"
#define FAT_ENV_FILE "uboot.env"

1
include/configs/xilinx_zynqmp.h
View File

@ -73,7 +73,6 @@
# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
# endif
# define CONFIG_ENV_IS_IN_FAT
# define FAT_ENV_DEVICE_AND_PART "0:auto"
# define FAT_ENV_FILE "uboot.env"
# define FAT_ENV_INTERFACE "mmc"

1
scripts/config_whitelist.txt
View File

@ -633,7 +633,6 @@ CONFIG_ENV_FLAGS_LIST_STATIC
CONFIG_ENV_FLASHBOOT
CONFIG_ENV_IS_EMBEDDED
CONFIG_ENV_IS_IN_
CONFIG_ENV_IS_IN_FAT
CONFIG_ENV_IS_IN_ONENAND
CONFIG_ENV_MAX_ENTRIES
CONFIG_ENV_MIN_ENTRIES