ARM: tegra: Enable PCIe on Beaver
The Beaver has an ethernet NIC connected to the PCIe bus. Enable the PCIe controller and the network device driver so that the device can boot over the network. In addition the board has a mini-PCIe expansion slot. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
This commit is contained in:
Thierry Reding
Tom Warren
parent
5a2c96a0e5
commit
affe026928
@ -28,6 +28,33 @@
|
||||
reg = <0x80000000 0x7ff00000>;
|
||||
};
|
||||
|
||||
pcie-controller@00003000 {
|
||||
status = "okay";
|
||||
|
||||
avdd-pexa-supply = <&ldo1_reg>;
|
||||
vdd-pexa-supply = <&ldo1_reg>;
|
||||
avdd-pexb-supply = <&ldo1_reg>;
|
||||
vdd-pexb-supply = <&ldo1_reg>;
|
||||
avdd-pex-pll-supply = <&ldo1_reg>;
|
||||
avdd-plle-supply = <&ldo1_reg>;
|
||||
vddio-pex-ctl-supply = <&sys_3v3_reg>;
|
||||
hvdd-pex-supply = <&sys_3v3_pexs_reg>;
|
||||
|
||||
pci@1,0 {
|
||||
status = "okay";
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
|
||||
pci@2,0 {
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
|
||||
pci@3,0 {
|
||||
status = "okay";
|
||||
nvidia,num-lanes = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@7000c000 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
@ -51,6 +78,110 @@
|
||||
i2c@7000d000 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic: tps65911@2d {
|
||||
compatible = "ti,tps65911";
|
||||
reg = <0x2d>;
|
||||
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupt-controller;
|
||||
|
||||
ti,system-power-controller;
|
||||
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
|
||||
vcc1-supply = <&vdd_5v_in_reg>;
|
||||
vcc2-supply = <&vdd_5v_in_reg>;
|
||||
vcc3-supply = <&vio_reg>;
|
||||
vcc4-supply = <&vdd_5v_in_reg>;
|
||||
vcc5-supply = <&vdd_5v_in_reg>;
|
||||
vcc6-supply = <&vdd2_reg>;
|
||||
vcc7-supply = <&vdd_5v_in_reg>;
|
||||
vccio-supply = <&vdd_5v_in_reg>;
|
||||
|
||||
regulators {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdd1_reg: vdd1 {
|
||||
regulator-name = "vddio_ddr_1v2";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd2_reg: vdd2 {
|
||||
regulator-name = "vdd_1v5_gen";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddctrl_reg: vddctrl {
|
||||
regulator-name = "vdd_cpu,vdd_sys";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vio_reg: vio {
|
||||
regulator-name = "vdd_1v8_gen";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: ldo1 {
|
||||
regulator-name = "vdd_pexa,vdd_pexb";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
ldo2_reg: ldo2 {
|
||||
regulator-name = "vdd_sata,avdd_plle";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
};
|
||||
|
||||
/* LDO3 is not connected to anything */
|
||||
|
||||
ldo4_reg: ldo4 {
|
||||
regulator-name = "vdd_rtc";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo5_reg: ldo5 {
|
||||
regulator-name = "vddio_sdmmc,avdd_vdac";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo6_reg: ldo6 {
|
||||
regulator-name = "avdd_dsi_csi,pwrdet_mipi";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
ldo7_reg: ldo7 {
|
||||
regulator-name = "vdd_pllm,x,u,a_p_c_s";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo8_reg: ldo8 {
|
||||
regulator-name = "vdd_ddr_hs";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
spi@7000da00 {
|
||||
@ -86,4 +217,118 @@
|
||||
nvidia,vbus-gpio = <&gpio 236 0>; /* PDD4 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vdd_5v_in_reg: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "vdd_5v_in";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
chargepump_5v_reg: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "chargepump_5v";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
ddr_reg: regulator@2 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <2>;
|
||||
regulator-name = "vdd_ddr";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vdd_5v_in_reg>;
|
||||
};
|
||||
|
||||
vdd_5v_sata_reg: regulator@3 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <3>;
|
||||
regulator-name = "vdd_5v_sata";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vdd_5v_in_reg>;
|
||||
};
|
||||
|
||||
usb1_vbus_reg: regulator@4 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <4>;
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
|
||||
gpio-open-drain;
|
||||
vin-supply = <&vdd_5v_in_reg>;
|
||||
};
|
||||
|
||||
usb3_vbus_reg: regulator@5 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <5>;
|
||||
regulator-name = "usb3_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
|
||||
gpio-open-drain;
|
||||
vin-supply = <&vdd_5v_in_reg>;
|
||||
};
|
||||
|
||||
sys_3v3_reg: regulator@6 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <6>;
|
||||
regulator-name = "sys_3v3,vdd_3v3_alw";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vdd_5v_in_reg>;
|
||||
};
|
||||
|
||||
sys_3v3_pexs_reg: regulator@7 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <7>;
|
||||
regulator-name = "sys_3v3_pexs";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&sys_3v3_reg>;
|
||||
};
|
||||
|
||||
vdd_5v0_hdmi: regulator@8 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <8>;
|
||||
regulator-name = "+VDD_5V_HDMI";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&sys_3v3_reg>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -76,6 +76,16 @@
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
|
||||
/* PCI host support */
|
||||
#define CONFIG_PCI
|
||||
#define CONFIG_PCI_TEGRA
|
||||
#define CONFIG_PCI_PNP
|
||||
#define CONFIG_CMD_PCI
|
||||
#define CONFIG_CMD_PCI_ENUM
|
||||
|
||||
/* PCI networking support */
|
||||
#define CONFIG_RTL8169
|
||||
|
||||
/* General networking support */
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_DHCP
|
||||
|
||||
Loading…
Reference in New Issue
Block a user