configs: dra7xx_evm: Add Kconfigs for SPL_DFU bootmode

Enable configs for supporting SPL_DFU bootmode.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
This commit is contained in:
Faiz Abbas 2019-10-09 12:35:19 +02:00 committed by Tom Rini
parent 6b23f53b08
commit add2242c49
2 changed files with 12 additions and 0 deletions

View File

@ -25,8 +25,11 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_DFU=y
CONFIG_CMD_SPL=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
@ -85,6 +88,7 @@ CONFIG_MII=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPL_PHY=y
CONFIG_PIPE3_PHY=y
CONFIG_SPL_PIPE3_PHY=y
CONFIG_OMAP_USB2_PHY=y
CONFIG_PMIC_PALMAS=y
CONFIG_PMIC_LP873X=y
@ -107,7 +111,9 @@ CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_DWC3_PHY_OMAP=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451

View File

@ -30,8 +30,11 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_DFU=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_NAND=y
CONFIG_CMD_MTDPARTS=y
@ -88,6 +91,7 @@ CONFIG_MII=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_SPL_PHY=y
CONFIG_PIPE3_PHY=y
CONFIG_SPL_PIPE3_PHY=y
CONFIG_OMAP_USB2_PHY=y
CONFIG_PMIC_PALMAS=y
CONFIG_PMIC_LP873X=y
@ -110,7 +114,9 @@ CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_DWC3_OMAP=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_DWC3_PHY_OMAP=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451