arm: mvebu: Espressobin: Enable 'mtd' command and define SPI NOR partitions
U-Boot now supports parsing SPI NOR partitions from Device Tree. So enable 'mtd' command support for Espressobin board and define partition layout in U-Boot Espressobin DTS file. Access to SPI NOR via 'sf' command is old method and 'mtd' command is now preferred variant. From include file remove '#define CONFIG_MTD_PARTITIONS' as this option is now defined and enabled in defconfig file. This change is required to fix compile error: CC arch/arm/lib/asm-offsets.s In file included from include/config.h:4, from include/common.h:16, from lib/asm-offsets.c:14: include/configs/mvebu_armada-37xx.h:63: warning: "CONFIG_MTD_PARTITIONS" redefined #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */ In file included from ././include/linux/kconfig.h:4, from <command-line>: include/generated/autoconf.h:44: note: this is the location of the previous definition #define CONFIG_MTD_PARTITIONS 1 After enabling support for mtd command, output from 'mtd list' on Espressobin board is: => mtd list List of MTD devices: * w25q32dw - device: spi-flash@0 - parent: spi@10600 - driver: jedec_spi_nor - path: /soc/internal-regs/spi@10600/spi-flash@0 - type: NOR flash - block size: 0x1000 bytes - min I/O: 0x1 bytes - 0x000000000000-0x000000400000 : "w25q32dw" - 0x000000000000-0x0000003f0000 : "firmware" - 0x0000003f0000-0x000000400000 : "u-boot-env" => Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Konstantin Porotchkin <kostap@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
This commit is contained in:
parent
92f36c8e74
commit
a675eb14bd
@ -164,6 +164,24 @@
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <50000000>;
|
||||
m25p,fast-read;
|
||||
|
||||
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@firmware {
|
||||
reg = <0 CONFIG_ENV_OFFSET>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@u-boot-env {
|
||||
reg = <CONFIG_ENV_OFFSET CONFIG_ENV_SIZE>;
|
||||
label = "u-boot-env";
|
||||
};
|
||||
};
|
||||
#endif
|
||||
};
|
||||
};
|
||||
|
||||
|
@ -28,6 +28,7 @@ CONFIG_BOARD_LATE_INIT=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_MTD=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_SPI=y
|
||||
CONFIG_CMD_USB=y
|
||||
@ -54,6 +55,7 @@ CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_SDMA=y
|
||||
CONFIG_MMC_SDHCI_XENON=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_DM_MTD=y
|
||||
CONFIG_SF_DEFAULT_MODE=0
|
||||
CONFIG_SF_DEFAULT_SPEED=40000000
|
||||
CONFIG_SPI_FLASH_GIGADEVICE=y
|
||||
@ -62,6 +64,7 @@ CONFIG_SPI_FLASH_MACRONIX=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
CONFIG_SPI_FLASH_WINBOND=y
|
||||
CONFIG_SPI_FLASH_MTD=y
|
||||
CONFIG_PHY_MARVELL=y
|
||||
CONFIG_PHY_GIGE=y
|
||||
CONFIG_E1000=y
|
||||
|
@ -57,11 +57,6 @@
|
||||
#define CONFIG_I2C_MV
|
||||
#define CONFIG_SYS_I2C_SLAVE 0x0
|
||||
|
||||
/*
|
||||
* SPI Flash configuration
|
||||
*/
|
||||
#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
|
||||
|
||||
/*
|
||||
* Environment
|
||||
*/
|
||||
|
Loading…
Reference in New Issue
Block a user