ARM: dts: rockchip: Add VMARC RK3288 SOM initial support
VMARC RK3288 SOM is a standard SMARC SOM design with Rockchip RK3288 SoC, which is designed by Vamrs. Specification: - Rockchip RK3288 - PMIC: RK808 - SD slot, 16GiB eMMC - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet, PCIe - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3288 SOM, this would use with associated carrier board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jagan Teki
Kever Yang
parent
1a95b1e82c
commit
9e7b9d4fc0
298
arch/arm/dts/rk3288-vmarc-som.dtsi
Normal file
298
arch/arm/dts/rk3288-vmarc-som.dtsi
Normal file
@ -0,0 +1,298 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
|
||||
* Copyright (c) 2019 Vamrs Limited
|
||||
* Copyright (c) 2019 Amarula Solutions(India)
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
|
||||
/ {
|
||||
compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
|
||||
|
||||
ext_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "ext_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
vccio_flash: vccio-flash-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccio_flash";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
startup-delay-us = <150>;
|
||||
vin-supply = <&vcc_io>;
|
||||
};
|
||||
|
||||
vcc_sys: vsys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
disable-wp;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_MAC>;
|
||||
assigned-clock-parents = <&ext_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <&vcc_io>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x30>;
|
||||
rx_delay = <0x10>;
|
||||
max-speed = <1000>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int &global_pwroff>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc_io>;
|
||||
vcc9-supply = <&vcc_io>;
|
||||
vcc10-supply = <&vcc_sys>;
|
||||
vcc11-supply = <&vcc_sys>;
|
||||
vcc12-supply = <&vcc_io>;
|
||||
vddio-supply = <&vcc_io>;
|
||||
|
||||
regulators {
|
||||
vdd_cpu: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-ramp-delay = <6000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_io: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_io";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_tp: LDO_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_tp";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_codec: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcca_codec";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_10: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd_10";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_wl: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_wl";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd10_lcd: LDO_REG6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-name = "vdd10_lcd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_18: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_18";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc18_lcd: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc18_lcd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: SWITCH_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_lcd: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_lcd";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
bb-supply = <&vcc_io>;
|
||||
flash0-supply = <&vccio_flash>;
|
||||
gpio1830-supply = <&vcc_18>;
|
||||
gpio30-supply = <&vcc_io>;
|
||||
sdcard-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
||||
bias-pull-up;
|
||||
drive-strength = <8>;
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
sdmmc_bus4: sdmmc-bus4 {
|
||||
rockchip,pins =
|
||||
<6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
|
||||
<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_clk: sdmmc-clk {
|
||||
rockchip,pins =
|
||||
<6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_cmd: sdmmc-cmd {
|
||||
rockchip,pins =
|
||||
<6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user