drivers: phy: add PIPE3 phy driver
This phy is found on omap platforms with sata capabilities. Except for the part related to the DM and the PHY framework, the code is basically a copy paste from arch/arm/mach-omap2/pipe3-phy.c Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
This commit is contained in:
Jean-Jacques Hiblot
Simon Glass
parent
86322f5982
commit
982082d9ce
@ -41,4 +41,22 @@ config PHY_SANDBOX
|
||||
This select a dummy sandbox PHY driver. It used only to implement
|
||||
the unit tests for the phy framework
|
||||
|
||||
config PIPE3_PHY
|
||||
bool "Support omap's PIPE3 PHY"
|
||||
depends on PHY && ARCH_OMAP2
|
||||
help
|
||||
Support for the omap PIPE3 phy for sata
|
||||
|
||||
This PHY is found on omap devices supporting SATA such as dra7, am57x
|
||||
and omap5
|
||||
|
||||
config SPL_PIPE3_PHY
|
||||
bool "Support omap's PIPE3 PHY in SPL"
|
||||
depends on SPL_PHY && ARCH_OMAP2
|
||||
help
|
||||
Support for the omap PIPE3 phy for sata in SPL
|
||||
|
||||
This PHY is found on omap devices supporting SATA such as dra7, am57x
|
||||
and omap5
|
||||
|
||||
endmenu
|
||||
|
||||
@ -7,3 +7,4 @@
|
||||
|
||||
obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
|
||||
obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
|
||||
obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
|
||||
|
||||
373
drivers/phy/ti-pipe3-phy.c
Normal file
373
drivers/phy/ti-pipe3-phy.c
Normal file
@ -0,0 +1,373 @@
|
||||
/*
|
||||
* Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Written by Jean-Jacques Hiblot <jjhiblot@ti.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <dm/device.h>
|
||||
#include <generic-phy.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <syscon.h>
|
||||
#include <regmap.h>
|
||||
|
||||
/* PLLCTRL Registers */
|
||||
#define PLL_STATUS 0x00000004
|
||||
#define PLL_GO 0x00000008
|
||||
#define PLL_CONFIGURATION1 0x0000000C
|
||||
#define PLL_CONFIGURATION2 0x00000010
|
||||
#define PLL_CONFIGURATION3 0x00000014
|
||||
#define PLL_CONFIGURATION4 0x00000020
|
||||
|
||||
#define PLL_REGM_MASK 0x001FFE00
|
||||
#define PLL_REGM_SHIFT 9
|
||||
#define PLL_REGM_F_MASK 0x0003FFFF
|
||||
#define PLL_REGM_F_SHIFT 0
|
||||
#define PLL_REGN_MASK 0x000001FE
|
||||
#define PLL_REGN_SHIFT 1
|
||||
#define PLL_SELFREQDCO_MASK 0x0000000E
|
||||
#define PLL_SELFREQDCO_SHIFT 1
|
||||
#define PLL_SD_MASK 0x0003FC00
|
||||
#define PLL_SD_SHIFT 10
|
||||
#define SET_PLL_GO 0x1
|
||||
#define PLL_TICOPWDN BIT(16)
|
||||
#define PLL_LDOPWDN BIT(15)
|
||||
#define PLL_LOCK 0x2
|
||||
#define PLL_IDLE 0x1
|
||||
|
||||
/* Software rest for the SATA PLL (in CTRL_CORE_SMA_SW_0 register)*/
|
||||
#define SATA_PLL_SOFT_RESET (1<<18)
|
||||
|
||||
/* PHY POWER CONTROL Register */
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE
|
||||
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000
|
||||
#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16
|
||||
|
||||
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3
|
||||
#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0
|
||||
|
||||
|
||||
#define PLL_IDLE_TIME 100 /* in milliseconds */
|
||||
#define PLL_LOCK_TIME 100 /* in milliseconds */
|
||||
|
||||
struct omap_pipe3 {
|
||||
void __iomem *pll_ctrl_base;
|
||||
void __iomem *power_reg;
|
||||
void __iomem *pll_reset_reg;
|
||||
struct pipe3_dpll_map *dpll_map;
|
||||
};
|
||||
|
||||
|
||||
struct pipe3_dpll_params {
|
||||
u16 m;
|
||||
u8 n;
|
||||
u8 freq:3;
|
||||
u8 sd;
|
||||
u32 mf;
|
||||
};
|
||||
|
||||
struct pipe3_dpll_map {
|
||||
unsigned long rate;
|
||||
struct pipe3_dpll_params params;
|
||||
};
|
||||
|
||||
static inline u32 omap_pipe3_readl(void __iomem *addr, unsigned offset)
|
||||
{
|
||||
return readl(addr + offset);
|
||||
}
|
||||
|
||||
static inline void omap_pipe3_writel(void __iomem *addr, unsigned offset,
|
||||
u32 data)
|
||||
{
|
||||
writel(data, addr + offset);
|
||||
}
|
||||
|
||||
static struct pipe3_dpll_params *omap_pipe3_get_dpll_params(struct omap_pipe3
|
||||
*pipe3)
|
||||
{
|
||||
u32 rate;
|
||||
struct pipe3_dpll_map *dpll_map = pipe3->dpll_map;
|
||||
|
||||
rate = get_sys_clk_freq();
|
||||
|
||||
for (; dpll_map->rate; dpll_map++) {
|
||||
if (rate == dpll_map->rate)
|
||||
return &dpll_map->params;
|
||||
}
|
||||
|
||||
printf("%s: No DPLL configuration for %u Hz SYS CLK\n",
|
||||
__func__, rate);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static int omap_pipe3_wait_lock(struct omap_pipe3 *pipe3)
|
||||
{
|
||||
u32 val;
|
||||
int timeout = PLL_LOCK_TIME;
|
||||
|
||||
do {
|
||||
mdelay(1);
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS);
|
||||
if (val & PLL_LOCK)
|
||||
break;
|
||||
} while (--timeout);
|
||||
|
||||
if (!(val & PLL_LOCK)) {
|
||||
printf("%s: DPLL failed to lock\n", __func__);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int omap_pipe3_dpll_program(struct omap_pipe3 *pipe3)
|
||||
{
|
||||
u32 val;
|
||||
struct pipe3_dpll_params *dpll_params;
|
||||
|
||||
dpll_params = omap_pipe3_get_dpll_params(pipe3);
|
||||
if (!dpll_params) {
|
||||
printf("%s: Invalid DPLL parameters\n", __func__);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION1);
|
||||
val &= ~PLL_REGN_MASK;
|
||||
val |= dpll_params->n << PLL_REGN_SHIFT;
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
||||
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2);
|
||||
val &= ~PLL_SELFREQDCO_MASK;
|
||||
val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
||||
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION1);
|
||||
val &= ~PLL_REGM_MASK;
|
||||
val |= dpll_params->m << PLL_REGM_SHIFT;
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION1, val);
|
||||
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION4);
|
||||
val &= ~PLL_REGM_F_MASK;
|
||||
val |= dpll_params->mf << PLL_REGM_F_SHIFT;
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION4, val);
|
||||
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION3);
|
||||
val &= ~PLL_SD_MASK;
|
||||
val |= dpll_params->sd << PLL_SD_SHIFT;
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION3, val);
|
||||
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_GO, SET_PLL_GO);
|
||||
|
||||
return omap_pipe3_wait_lock(pipe3);
|
||||
}
|
||||
|
||||
static void omap_control_pipe3_power(struct omap_pipe3 *pipe3, int on)
|
||||
{
|
||||
u32 val, rate;
|
||||
|
||||
val = readl(pipe3->power_reg);
|
||||
|
||||
rate = get_sys_clk_freq();
|
||||
rate = rate/1000000;
|
||||
|
||||
if (on) {
|
||||
val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
|
||||
val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
||||
val |= rate <<
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
|
||||
} else {
|
||||
val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
|
||||
val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
|
||||
OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
|
||||
}
|
||||
|
||||
writel(val, pipe3->power_reg);
|
||||
}
|
||||
|
||||
static int pipe3_init(struct phy *phy)
|
||||
{
|
||||
int ret;
|
||||
u32 val;
|
||||
struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
|
||||
|
||||
/* Program the DPLL only if not locked */
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS);
|
||||
if (!(val & PLL_LOCK)) {
|
||||
ret = omap_pipe3_dpll_program(pipe3);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else {
|
||||
/* else just bring it out of IDLE mode */
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base,
|
||||
PLL_CONFIGURATION2);
|
||||
if (val & PLL_IDLE) {
|
||||
val &= ~PLL_IDLE;
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base,
|
||||
PLL_CONFIGURATION2, val);
|
||||
ret = omap_pipe3_wait_lock(pipe3);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pipe3_power_on(struct phy *phy)
|
||||
{
|
||||
struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
|
||||
|
||||
/* Power up the PHY */
|
||||
omap_control_pipe3_power(pipe3, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pipe3_power_off(struct phy *phy)
|
||||
{
|
||||
struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
|
||||
|
||||
/* Power down the PHY */
|
||||
omap_control_pipe3_power(pipe3, 0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int pipe3_exit(struct phy *phy)
|
||||
{
|
||||
u32 val;
|
||||
int timeout = PLL_IDLE_TIME;
|
||||
struct omap_pipe3 *pipe3 = dev_get_priv(phy->dev);
|
||||
|
||||
pipe3_power_off(phy);
|
||||
|
||||
/* Put DPLL in IDLE mode */
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_CONFIGURATION2);
|
||||
val |= PLL_IDLE;
|
||||
omap_pipe3_writel(pipe3->pll_ctrl_base, PLL_CONFIGURATION2, val);
|
||||
|
||||
/* wait for LDO and Oscillator to power down */
|
||||
do {
|
||||
mdelay(1);
|
||||
val = omap_pipe3_readl(pipe3->pll_ctrl_base, PLL_STATUS);
|
||||
if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
|
||||
break;
|
||||
} while (--timeout);
|
||||
|
||||
if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
|
||||
error("%s: Failed to power down DPLL: PLL_STATUS 0x%x\n",
|
||||
__func__, val);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
val = readl(pipe3->pll_reset_reg);
|
||||
writel(val | SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
|
||||
mdelay(1);
|
||||
writel(val & ~SATA_PLL_SOFT_RESET, pipe3->pll_reset_reg);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void *get_reg(struct udevice *dev, const char *name)
|
||||
{
|
||||
struct udevice *syscon;
|
||||
struct regmap *regmap;
|
||||
const fdt32_t *cell;
|
||||
int len, err;
|
||||
void *base;
|
||||
|
||||
err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
|
||||
name, &syscon);
|
||||
if (err) {
|
||||
error("unable to find syscon device for %s (%d)\n",
|
||||
name, err);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
regmap = syscon_get_regmap(syscon);
|
||||
if (IS_ERR(regmap)) {
|
||||
error("unable to find regmap for %s (%ld)\n",
|
||||
name, PTR_ERR(regmap));
|
||||
return NULL;
|
||||
}
|
||||
|
||||
cell = fdt_getprop(gd->fdt_blob, dev->of_offset, name,
|
||||
&len);
|
||||
if (len < 2*sizeof(fdt32_t)) {
|
||||
error("offset not available for %s\n", name);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
base = regmap_get_range(regmap, 0);
|
||||
if (!base)
|
||||
return NULL;
|
||||
|
||||
return fdtdec_get_number(cell + 1, 1) + base;
|
||||
}
|
||||
|
||||
static int pipe3_phy_probe(struct udevice *dev)
|
||||
{
|
||||
fdt_addr_t addr;
|
||||
fdt_size_t sz;
|
||||
struct omap_pipe3 *pipe3 = dev_get_priv(dev);
|
||||
|
||||
addr = dev_get_addr_size_index(dev, 2, &sz);
|
||||
if (addr == FDT_ADDR_T_NONE) {
|
||||
error("missing pll ctrl address\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
pipe3->pll_ctrl_base = map_physmem(addr, sz, MAP_NOCACHE);
|
||||
if (!pipe3->pll_ctrl_base) {
|
||||
error("unable to remap pll ctrl\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
pipe3->power_reg = get_reg(dev, "syscon-phy-power");
|
||||
if (!pipe3->power_reg)
|
||||
return -EINVAL;
|
||||
|
||||
pipe3->pll_reset_reg = get_reg(dev, "syscon-pllreset");
|
||||
if (!pipe3->pll_reset_reg)
|
||||
return -EINVAL;
|
||||
|
||||
pipe3->dpll_map = (struct pipe3_dpll_map *)dev_get_driver_data(dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct pipe3_dpll_map dpll_map_sata[] = {
|
||||
{12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */
|
||||
{16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */
|
||||
{19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
|
||||
{20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */
|
||||
{26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */
|
||||
{38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */
|
||||
{ }, /* Terminator */
|
||||
};
|
||||
|
||||
static const struct udevice_id pipe3_phy_ids[] = {
|
||||
{ .compatible = "ti,phy-pipe3-sata", .data = (ulong)&dpll_map_sata },
|
||||
{ }
|
||||
};
|
||||
|
||||
static struct phy_ops pipe3_phy_ops = {
|
||||
.init = pipe3_init,
|
||||
.power_on = pipe3_power_on,
|
||||
.power_off = pipe3_power_off,
|
||||
.exit = pipe3_exit,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(pipe3_phy) = {
|
||||
.name = "pipe3_phy",
|
||||
.id = UCLASS_PHY,
|
||||
.of_match = pipe3_phy_ids,
|
||||
.ops = &pipe3_phy_ops,
|
||||
.probe = pipe3_phy_probe,
|
||||
.priv_auto_alloc_size = sizeof(struct omap_pipe3),
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user