leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mmc: fsl_esdhc_imx: use VENDORSPEC_FRC_SDCLK_ON when necessary

Browse Source 
After commit f132aab403 ("Revert "mmc: fsl_esdhc_imx: use
VENDORSPEC_FRC_SDCLK_ON to control card clock output""), it
involve issue in mmc_switch_voltage(), because of the special
design of usdhc.

For FSL_USDHC, it do not implement VENDORSPEC_CKEN/PEREN/HCKEN/IPGEN,
these are reserved bits(Though RM contain the definition of these bits,
but actually internal IC logic do not implement, already confirm with
IC team). Instead, use VENDORSPEC_FRC_SDCLK_ON to gate on/off the card
clock output. Here is the definition of this bit in RM:

[8] FRC_SDCLK_ON
Force CLK output active
Do not set this bit to 1 unless it is necessary. Also, make sure that
this bit is cleared when uSDHC’s clock is about to be changed (frequency
change, clock source change, or delay chain tuning).
0b - CLK active or inactive is fully controlled by the hardware.
1b - Force CLK active

In default, the FRC_SDCLK_ON is 0. This means, when there is no command
or data transfer on bus, hardware will gate off the card clock. But in
some case, we need the card clock keep on. Take IO voltage 1.8v switch
as example, after IO voltage change to 1.8v, spec require gate off the
card clock for 5ms, and gate on the clock back, once detect the card
clock on, then the card will draw the dat0 to high immediately. If there
is not clock gate off/on behavior, some card will keep the dat0 to low
level. This is the reason we fail in mmc_switch_voltage().

To fix this issue, and concern that this is only the fsl usdhc hardware
design limitation, set the bit FRC_SDCLK_ON in the beginning of the
wait_dat0() and clear it in the end. To make sure the 1.8v IO voltage
switch process align with SD specification.

For standard tuning process, usdhc specification also require the card
clock keep on, so also add these behavior in fsl_esdhc_execute_tuning().

Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
This commit is contained in:
Haibo Chen 2022-02-22 11:28:18 +08:00 committed by Jaehoon Chung
parent 4dc9b1771b
commit 925f6900c8
2 changed files with 24 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

25
drivers/mmc/fsl_esdhc_imx.c
View File

@ -827,13 +827,16 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
struct mmc *mmc = &plat->mmc;
u32 irqstaten = esdhc_read32(&regs->irqstaten);
u32 irqsigen = esdhc_read32(&regs->irqsigen);
int i, ret = -ETIMEDOUT;
u32 val, mixctrl;
int i, err, ret = -ETIMEDOUT;
u32 val, mixctrl, tmp;
/* clock tuning is not needed for upto 52MHz */
if (mmc->clock <= 52000000)
return 0;
/* make sure the card clock keep on */
esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
/* This is readw/writew SDHCI_HOST_CONTROL2 when tuning */
if (priv->flags & ESDHC_FLAG_STD_TUNING) {
val = esdhc_read32(&regs->autoc12err);
@ -893,6 +896,12 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
esdhc_stop_tuning(mmc);
/* change to default setting, let host control the card clock */
esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
err = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100);
if (err)
dev_warn(dev, "card clock not gate off as expect.\n");
return ret;
}
#endif
@ -1567,14 +1576,24 @@ static int __maybe_unused fsl_esdhc_set_enhanced_strobe(struct udevice *dev)
static int fsl_esdhc_wait_dat0(struct udevice *dev, int state,
int timeout_us)
{
int ret;
int ret, err;
u32 tmp;
struct fsl_esdhc_priv *priv = dev_get_priv(dev);
struct fsl_esdhc *regs = priv->esdhc_regs;
/* make sure the card clock keep on */
esdhc_setbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
ret = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp,
!!(tmp & PRSSTAT_DAT0) == !!state,
timeout_us);
/* change to default setting, let host control the card clock */
esdhc_clrbits32(&regs->vendorspec, VENDORSPEC_FRC_SDCLK_ON);
err = readx_poll_timeout(esdhc_read32, &regs->prsstat, tmp, tmp & PRSSTAT_SDOFF, 100);
if (err)
dev_warn(dev, "card clock not gate off as expect.\n");
return ret;
}

2
include/fsl_esdhc_imx.h
View File

@ -37,6 +37,7 @@
#define VENDORSPEC_HCKEN 0x00001000
#define VENDORSPEC_IPGEN 0x00000800
#define VENDORSPEC_INIT 0x20007809
#define VENDORSPEC_FRC_SDCLK_ON 0x00000100
#define IRQSTAT 0x0002e030
#define IRQSTAT_DMAE (0x10000000)
@ -94,6 +95,7 @@
#define PRSSTAT_CINS (0x00010000)
#define PRSSTAT_BREN (0x00000800)
#define PRSSTAT_BWEN (0x00000400)
#define PRSSTAT_SDOFF (0x00000080)
#define PRSSTAT_SDSTB (0X00000008)
#define PRSSTAT_DLA (0x00000004)
#define PRSSTAT_CICHB (0x00000002)