ARM: davinci: remove support for cam_enc_4xx
This has not been converted to Generic Board, so should be removed. (See doc/README.generic-board for details.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Marek Vasut <marex@denx.de>
This commit is contained in:
Masahiro Yamada
Tom Rini
parent
a5d338b2f2
commit
8d77576371
arch/arm/mach-davinci
board/ait/cam_enc_4xx
configs
doc
include/configs
@ -18,10 +18,6 @@ config TARGET_DA850EVM
|
||||
bool "DA850 EVM board"
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_CAM_ENC_4XX
|
||||
bool "CAM ENC 4xx board"
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_OMAPL138_LCDK
|
||||
bool "OMAPL138 LCDK"
|
||||
select SUPPORT_SPL
|
||||
@ -62,7 +58,6 @@ config SYS_SOC
|
||||
default "davinci"
|
||||
|
||||
source "board/enbw/enbw_cmc/Kconfig"
|
||||
source "board/ait/cam_enc_4xx/Kconfig"
|
||||
source "board/Barix/ipam390/Kconfig"
|
||||
source "board/davinci/da8xxevm/Kconfig"
|
||||
source "board/davinci/dm355evm/Kconfig"
|
||||
|
||||
@ -1,12 +0,0 @@
|
||||
if TARGET_CAM_ENC_4XX
|
||||
|
||||
config SYS_BOARD
|
||||
default "cam_enc_4xx"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "ait"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "cam_enc_4xx"
|
||||
|
||||
endif
|
||||
@ -1,6 +0,0 @@
|
||||
CAM_ENC_4XX BOARD
|
||||
M: Heiko Schocher <hs@denx.de>
|
||||
S: Maintained
|
||||
F: board/ait/cam_enc_4xx/
|
||||
F: include/configs/cam_enc_4xx.h
|
||||
F: configs/cam_enc_4xx_defconfig
|
||||
@ -1,10 +0,0 @@
|
||||
#
|
||||
# (C) Copyright 2000, 2001, 2002
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := cam_enc_4xx.o
|
||||
File diff suppressed because it is too large
Load Diff
@ -1,20 +0,0 @@
|
||||
#
|
||||
# AIT cam_enc_4xx board
|
||||
# cam_enc_4xx board has 1 bank of 256 MB DDR RAM
|
||||
# Physical Address: 8000'0000 to 9000'0000
|
||||
#
|
||||
# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
|
||||
# (mem base + reserved)
|
||||
#
|
||||
|
||||
UBL_CONFIG = $(srctree)/board/$(BOARDDIR)/ublimage.cfg
|
||||
ifndef CONFIG_SPL_BUILD
|
||||
ALL-y += u-boot.ubl
|
||||
else
|
||||
# as SPL_TEXT_BASE is not page-aligned, we need for some
|
||||
# linkers the -n flag (Do not page align data), to prevent
|
||||
# the following error message:
|
||||
# arm-linux-ld: u-boot-spl: Not enough room for program headers, try linking
|
||||
# with -N
|
||||
LDFLAGS_u-boot-spl += -n
|
||||
endif
|
||||
@ -1,57 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2002
|
||||
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
|
||||
*
|
||||
* (C) Copyright 2008
|
||||
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
|
||||
LENGTH = CONFIG_SPL_MAX_FOOTPRINT }
|
||||
|
||||
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_start)
|
||||
SECTIONS
|
||||
{
|
||||
. = CONFIG_SPL_TEXT_BASE;
|
||||
|
||||
. = ALIGN(4);
|
||||
.text :
|
||||
{
|
||||
__start = .;
|
||||
*(.vectors)
|
||||
arch/arm/cpu/arm926ejs/start.o (.text*)
|
||||
*(.text*)
|
||||
} >.sram
|
||||
|
||||
. = ALIGN(4);
|
||||
.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
|
||||
|
||||
. = ALIGN(4);
|
||||
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
|
||||
. = ALIGN(4);
|
||||
.rel.dyn : {
|
||||
__rel_dyn_start = .;
|
||||
*(.rel*)
|
||||
__rel_dyn_end = .;
|
||||
} >.sram
|
||||
|
||||
.bss :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
__bss_start = .;
|
||||
*(.bss*)
|
||||
. = ALIGN(4);
|
||||
__bss_end = .;
|
||||
} >.sram
|
||||
|
||||
__image_copy_end = .;
|
||||
|
||||
.end :
|
||||
{
|
||||
*(.__end)
|
||||
}
|
||||
}
|
||||
@ -1,31 +0,0 @@
|
||||
#
|
||||
# (C Copyright 2011
|
||||
# Heiko Schocher DENX Software Engineering hs@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
# Refer doc/README.ublimage for more details about how-to configure
|
||||
# and create ublimage boot image
|
||||
#
|
||||
# The syntax is taken as close as possible with the kwbimage
|
||||
|
||||
# UBL special mode : one of
|
||||
# safe (the board has no nand neither onenand)
|
||||
MODE safe
|
||||
|
||||
# Entry point address for the user bootloader (absolute address)
|
||||
# nand spl TEXT_BASE = 0x20 !!
|
||||
ENTRY 0x00000020
|
||||
|
||||
# Number of pages (size of user bootloader in number of pages)
|
||||
# @ nand spl 6 pages
|
||||
PAGES 6
|
||||
|
||||
# Block number where user bootloader is present
|
||||
START_BLOCK 0
|
||||
|
||||
# Page number where user bootloader is present
|
||||
# Page 0 is always UBL header
|
||||
START_PAGE 0
|
||||
|
||||
LD_ADDR 0x20
|
||||
@ -1,10 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_DAVINCI=y
|
||||
CONFIG_TARGET_CAM_ENC_4XX=y
|
||||
CONFIG_SPL=y
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SYS_PROMPT="cam_enc_4xx> "
|
||||
@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
|
||||
|
||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||
=================================================================================================
|
||||
cam_enc_4xx arm arm926ejs - - Heiko Schocher <hs@denx.de>
|
||||
atstk1003 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
|
||||
atstk1004 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
|
||||
atstk1006 avr32 - e5354b8a 2015-06-10 Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
|
||||
|
||||
@ -1,504 +0,0 @@
|
||||
/*
|
||||
* Copyright (C) 2009 Texas Instruments Incorporated
|
||||
*
|
||||
* Copyright (C) 2011
|
||||
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define CONFIG_SYS_NO_FLASH /* that is, no *NOR* flash */
|
||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET
|
||||
|
||||
/* SoC Configuration */
|
||||
#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
|
||||
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
|
||||
#define CONFIG_SOC_DM365
|
||||
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_DAVINCI_DM365_EVM
|
||||
|
||||
#define CONFIG_HOSTNAME cam_enc_4xx
|
||||
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
#define CONFIG_CAM_ENC_LED_MASK 0x0fc00000
|
||||
|
||||
/* Memory Info */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM_1 0x80000000
|
||||
#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MiB */
|
||||
#define DDR_4BANKS /* 4-bank DDR2 (256MB) */
|
||||
#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
|
||||
/* Serial Driver info: UART0 for console */
|
||||
#define CONFIG_SYS_NS16550
|
||||
#define CONFIG_SYS_NS16550_SERIAL
|
||||
#define CONFIG_SYS_NS16550_REG_SIZE -4
|
||||
#define CONFIG_SYS_NS16550_COM1 0x01c20000
|
||||
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_HZ_CLOCK
|
||||
#define CONFIG_CONS_INDEX 1
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
/* Network Configuration */
|
||||
#define CONFIG_DRIVER_TI_EMAC
|
||||
#define CONFIG_EMAC_MDIO_PHY_NUM 0
|
||||
#define CONFIG_SYS_EMAC_TI_CLKDIV 0xa9 /* 1MHz */
|
||||
#define CONFIG_MII
|
||||
#define CONFIG_BOOTP_DNS
|
||||
#define CONFIG_BOOTP_DNS2
|
||||
#define CONFIG_BOOTP_SEND_HOSTNAME
|
||||
#define CONFIG_NET_RETRY_COUNT 10
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_SYS_DCACHE_OFF
|
||||
#define CONFIG_RESET_PHY_R
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_I2C
|
||||
#define CONFIG_SYS_I2C_DAVINCI
|
||||
#define CONFIG_SYS_DAVINCI_I2C_SPEED 400000
|
||||
#define CONFIG_SYS_DAVINCI_I2C_SLAVE 0x10 /* SMBus host address */
|
||||
|
||||
/* NAND: socketed, two chipselects, normally 2 GBytes */
|
||||
#define CONFIG_NAND_DAVINCI
|
||||
#define CONFIG_SYS_NAND_CS 2
|
||||
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
||||
#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
|
||||
#define CONFIG_SYS_NAND_PAGE_2K
|
||||
|
||||
#define CONFIG_SYS_NAND_LARGEPAGE
|
||||
#define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, }
|
||||
/* socket has two chipselects, nCE0 gated by address BIT(14) */
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
|
||||
/* SPI support */
|
||||
#define CONFIG_SPI
|
||||
#define CONFIG_SPI_FLASH_STMICRO
|
||||
#define CONFIG_DAVINCI_SPI
|
||||
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
|
||||
#define CONFIG_SYS_SPI_CLK davinci_clk_get(SPI_PLLDIV)
|
||||
#define CONFIG_SF_DEFAULT_SPEED 3000000
|
||||
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
||||
#define CONFIG_CMD_SF
|
||||
|
||||
/* SD/MMC */
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_DAVINCI_MMC
|
||||
#define CONFIG_MMC_MBLOCK
|
||||
|
||||
/* U-Boot command configuration */
|
||||
#define CONFIG_CMD_ASKENV
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_I2C
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_SAVES
|
||||
|
||||
#ifdef CONFIG_CMD_BDI
|
||||
#define CONFIG_CLOCKS
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MMC
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#define CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_CMD_MMC
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_NAND_DAVINCI
|
||||
#define CONFIG_CMD_MTDPARTS
|
||||
#define CONFIG_MTD_PARTITIONS
|
||||
#define CONFIG_MTD_DEVICE
|
||||
#define CONFIG_CMD_NAND
|
||||
#define CONFIG_CMD_UBI
|
||||
#define CONFIG_CMD_UBIFS
|
||||
#define CONFIG_RBTREE
|
||||
#define CONFIG_LZO
|
||||
#endif
|
||||
|
||||
#define CONFIG_CRC32_VERIFY
|
||||
#define CONFIG_MX_CYCLIC
|
||||
|
||||
/* U-Boot general configuration */
|
||||
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
|
||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE /* Print buffer size */ \
|
||||
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
|
||||
#define CONFIG_MENU
|
||||
#define CONFIG_MENU_SHOW
|
||||
#define CONFIG_FIT
|
||||
#define CONFIG_BOARD_IMG_ADDR_R 0x80000000
|
||||
|
||||
#ifdef CONFIG_NAND_DAVINCI
|
||||
#define CONFIG_ENV_SIZE (16 << 10)
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET 0x180000
|
||||
#define CONFIG_ENV_RANGE 0x040000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x1c0000
|
||||
#undef CONFIG_ENV_IS_IN_FLASH
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
|
||||
#define CONFIG_CMD_ENV
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
|
||||
#define CONFIG_ENV_OFFSET (51 << 9) /* Sector 51 */
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#undef CONFIG_ENV_IS_IN_FLASH
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
/*
|
||||
* 24MHz InputClock / 15 prediv -> 1.6 MHz timer running
|
||||
* Timeout 1 second.
|
||||
*/
|
||||
#define CONFIG_AIT_TIMER_TIMEOUT 0x186a00
|
||||
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_VERSION_VARIABLE
|
||||
#define CONFIG_TIMESTAMP
|
||||
|
||||
/* U-Boot memory configuration */
|
||||
#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
|
||||
#define CONFIG_SYS_MEMTEST_START 0x80000000 /* physical address */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x81000000 /* test 16MB RAM */
|
||||
|
||||
/* Linux interfacing */
|
||||
#define CONFIG_CMDLINE_TAG
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_SYS_BARGSIZE 1024 /* bootarg Size */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
|
||||
|
||||
#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
|
||||
#define MTDPARTS_DEFAULT \
|
||||
"mtdparts=" \
|
||||
"davinci_nand.0:" \
|
||||
"128k(spl)," \
|
||||
"384k(UBLheader)," \
|
||||
"1m(u-boot)," \
|
||||
"512k(env)," \
|
||||
"-(ubi)"
|
||||
|
||||
#define CONFIG_SYS_NAND_PAGE_SIZE 0x800
|
||||
#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000
|
||||
|
||||
/* Defines for SPL */
|
||||
#define CONFIG_SPL_FRAMEWORK
|
||||
#define CONFIG_SPL_BOARD_INIT
|
||||
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
||||
#define CONFIG_SPL_NAND_SUPPORT
|
||||
#define CONFIG_SPL_NAND_BASE
|
||||
#define CONFIG_SPL_NAND_DRIVERS
|
||||
#define CONFIG_SPL_NAND_ECC
|
||||
#define CONFIG_SPL_NAND_SIMPLE
|
||||
#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
|
||||
#define CONFIG_SPL_SERIAL_SUPPORT
|
||||
#define CONFIG_SPL_POST_MEM_SUPPORT
|
||||
#define CONFIG_SPL_LDSCRIPT "$(BOARDDIR)/u-boot-spl.lds"
|
||||
#define CONFIG_SPL_STACK (0x00010000 + 0x7f00)
|
||||
|
||||
#define CONFIG_SPL_TEXT_BASE 0x00000020 /*CONFIG_SYS_SRAM_START*/
|
||||
/* Provide at least 16MB spacing between us and the Linux Kernel image */
|
||||
#define CONFIG_SPL_PAD_TO 12320
|
||||
#define CONFIG_SPL_MAX_FOOTPRINT 12288
|
||||
|
||||
#ifndef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SYS_TEXT_BASE 0x81080000
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_NAND_BASE 0x02000000
|
||||
#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
|
||||
CONFIG_SYS_NAND_PAGE_SIZE)
|
||||
|
||||
#define CONFIG_SYS_NAND_ECCPOS { \
|
||||
24, 25, 26, 27, 28, \
|
||||
29, 30, 31, 32, 33, 34, 35, 36, 37, 38, \
|
||||
39, 40, 41, 42, 43, 44, 45, 46, 47, 48, \
|
||||
49, 50, 51, 52, 53, 54, 55, 56, 57, 58, \
|
||||
59, 60, 61, 62, 63 }
|
||||
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
||||
#define CONFIG_SYS_NAND_ECCSIZE 0x200
|
||||
#define CONFIG_SYS_NAND_ECCBYTES 10
|
||||
#define CONFIG_SYS_NAND_MAX_OOBFREE 2
|
||||
#define CONFIG_SYS_NAND_MAX_ECCPOS 56
|
||||
#define CONFIG_SYS_NAND_OOBSIZE 64
|
||||
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||
|
||||
/*
|
||||
* RBL searches from Block n (n = 1..24)
|
||||
* so we can define, how many UBL Headers
|
||||
* we can write before the real spl code
|
||||
*/
|
||||
#define CONFIG_SYS_NROF_PAGES_NAND_SPL 6
|
||||
|
||||
#define CONFIG_SYS_NAND_U_BOOT_DST 0x81080000 /* u-boot TEXT_BASE */
|
||||
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
||||
|
||||
/*
|
||||
* Post tests for memory testing
|
||||
*/
|
||||
#define CONFIG_POST CONFIG_SYS_POST_MEMORY
|
||||
#define _POST_WORD_ADDR 0x0
|
||||
|
||||
#define CONFIG_DISPLAY_BOARDINFO
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SPL_STACK
|
||||
|
||||
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
||||
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0xa0000
|
||||
#define CONFIG_SYS_NAND_U_BOOT_ERA_SIZE 0x100000
|
||||
|
||||
/* for UBL header */
|
||||
#define CONFIG_SYS_UBL_BLOCK (CONFIG_SYS_NAND_PAGE_SIZE)
|
||||
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLM 0x55
|
||||
#define CONFIG_SYS_DM36x_PLL1_PREDIV 0x8005
|
||||
#define CONFIG_SYS_DM36x_PLL2_PLLM 0x09
|
||||
#define CONFIG_SYS_DM36x_PLL2_PREDIV 0x8000
|
||||
#define CONFIG_SYS_DM36x_PERI_CLK_CTRL 0x243F04FC
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV1 0x801b
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV2 0x8001
|
||||
/* POST DIV 680/2 = 340Mhz -> MJCP and HDVICP bus interface clock */
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV3 0x8001
|
||||
/*
|
||||
* POST DIV 680/4 = 170Mhz -> EDMA/Peripheral CFG0(1/2 MJCP/HDVICP bus
|
||||
* interface clk)
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV4 0x8003
|
||||
/* POST DIV 680/2 = 340Mhz -> VPSS */
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV5 0x8001
|
||||
/* POST DIV 680/9 = 75.6 Mhz -> VENC */
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV6 0x8008
|
||||
/*
|
||||
* POST DIV 680/1 = 680Mhz -> DDRx2(with internal divider of 2, clock boils
|
||||
* down to 340 Mhz)
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV7 0x8000
|
||||
/* POST DIV 680/7= 97Mhz-> MMC0/SD0 */
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV8 0x8006
|
||||
/* POST DIV 680/28 = 24.3Mhz-> CLKOUT */
|
||||
#define CONFIG_SYS_DM36x_PLL1_PLLDIV9 0x801b
|
||||
|
||||
#define CONFIG_SYS_DM36x_PLL2_PLLDIV1 0x8011
|
||||
/* POST DIV 432/1=432 Mhz -> ARM926/(HDVICP block) clk */
|
||||
#define CONFIG_SYS_DM36x_PLL2_PLLDIV2 0x8000
|
||||
#define CONFIG_SYS_DM36x_PLL2_PLLDIV3 0x8001
|
||||
/* POST DIV 432/21= 20.5714 Mhz->VOICE Codec clk */
|
||||
#define CONFIG_SYS_DM36x_PLL2_PLLDIV4 0x8014
|
||||
/* POST DIV 432/16=27 Mhz -> VENC(For SD modes, requires) */
|
||||
#define CONFIG_SYS_DM36x_PLL2_PLLDIV5 0x800f
|
||||
|
||||
/*
|
||||
* READ LATENCY 7 (CL + 2)
|
||||
* CONFIG_PWRDNEN = 1
|
||||
* CONFIG_EXT_STRBEN = 1
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_DDR2_DDRPHYCR (0 \
|
||||
| DV_DDR_PHY_EXT_STRBEN \
|
||||
| DV_DDR_PHY_PWRDNEN \
|
||||
| (7 << DV_DDR_PHY_RD_LATENCY_SHIFT))
|
||||
|
||||
/*
|
||||
* T_RFC = (trfc/DDR_CLK) - 1 = (195 / 2.941) - 1
|
||||
* T_RP = (trp/DDR_CLK) - 1 = (12.5 / 2.941) - 1
|
||||
* T_RCD = (trcd/DDR_CLK) - 1 = (12.5 / 2.941) - 1
|
||||
* T_WR = (twr/DDR_CLK) - 1 = (15 / 2.941) - 1
|
||||
* T_RAS = (tras/DDR_CLK) - 1 = (45 / 2.941) - 1
|
||||
* T_RC = (trc/DDR_CLK) - 1 = (57.5 / 2.941) - 1
|
||||
* T_RRD = (trrd/DDR_CLK) - 1 = (7.5 / 2.941) - 1
|
||||
* T_WTR = (twtr/DDR_CLK) - 1 = (7.5 / 2.941) - 1
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_DDR2_SDTIMR (0 \
|
||||
| (66 << DV_DDR_SDTMR1_RFC_SHIFT) \
|
||||
| (4 << DV_DDR_SDTMR1_RP_SHIFT) \
|
||||
| (4 << DV_DDR_SDTMR1_RCD_SHIFT) \
|
||||
| (5 << DV_DDR_SDTMR1_WR_SHIFT) \
|
||||
| (14 << DV_DDR_SDTMR1_RAS_SHIFT) \
|
||||
| (19 << DV_DDR_SDTMR1_RC_SHIFT) \
|
||||
| (2 << DV_DDR_SDTMR1_RRD_SHIFT) \
|
||||
| (2 << DV_DDR_SDTMR1_WTR_SHIFT))
|
||||
|
||||
/*
|
||||
* T_RASMAX = (trasmax/refresh_rate) - 1 = (70K / 7812.6) - 1
|
||||
* T_XP = tCKE - 1 = 3 - 2
|
||||
* T_XSNR= ((trfc + 10)/DDR_CLK) - 1 = (205 / 2.941) - 1
|
||||
* T_XSRD = txsrd - 1 = 200 - 1
|
||||
* T_RTP = (trtp/DDR_CLK) - 1 = (7.5 / 2.941) - 1
|
||||
* T_CKE = tcke - 1 = 3 - 1
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_DDR2_SDTIMR2 (0 \
|
||||
| (8 << DV_DDR_SDTMR2_RASMAX_SHIFT) \
|
||||
| (2 << DV_DDR_SDTMR2_XP_SHIFT) \
|
||||
| (69 << DV_DDR_SDTMR2_XSNR_SHIFT) \
|
||||
| (199 << DV_DDR_SDTMR2_XSRD_SHIFT) \
|
||||
| (2 << DV_DDR_SDTMR2_RTP_SHIFT) \
|
||||
| (2 << DV_DDR_SDTMR2_CKE_SHIFT))
|
||||
|
||||
/* PR_OLD_COUNT = 0xfe */
|
||||
#define CONFIG_SYS_DM36x_DDR2_PBBPR 0x000000FE
|
||||
/* refresh rate = 0x768 */
|
||||
#define CONFIG_SYS_DM36x_DDR2_SDRCR 0x00000768
|
||||
|
||||
#define CONFIG_SYS_DM36x_DDR2_SDBCR (0 \
|
||||
| (2 << DV_DDR_SDCR_PAGESIZE_SHIFT) \
|
||||
| (3 << DV_DDR_SDCR_IBANK_SHIFT) \
|
||||
| (5 << DV_DDR_SDCR_CL_SHIFT) \
|
||||
| (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT) \
|
||||
| (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) \
|
||||
| (1 << DV_DDR_SDCR_DDREN_SHIFT) \
|
||||
| (0 << DV_DDR_SDCR_DDRDRIVE0_SHIFT) \
|
||||
| (1 << DV_DDR_SDCR_DDR2EN_SHIFT) \
|
||||
| (1 << DV_DDR_SDCR_DDR_DDQS_SHIFT) \
|
||||
| (1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT))
|
||||
|
||||
#define CONFIG_SYS_DM36x_AWCCR 0xff
|
||||
#define CONFIG_SYS_DM36x_AB1CR 0x40400204
|
||||
#define CONFIG_SYS_DM36x_AB2CR 0x04ca2650
|
||||
|
||||
/* All Video Inputs */
|
||||
#define CONFIG_SYS_DM36x_PINMUX0 0x00000000
|
||||
/*
|
||||
* All Video Outputs,
|
||||
* GPIO 86, 87 + 90 0x0000f030
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_PINMUX1 0x00530002
|
||||
#define CONFIG_SYS_DM36x_PINMUX2 0x00001815
|
||||
/*
|
||||
* SPI1, UART1, I2C, SD0, SD1, McBSP0, CLKOUTs
|
||||
* GPIO 25 0x60000000
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_PINMUX3 0x9b5affff
|
||||
/*
|
||||
* MMC/SD0 instead of MS, SPI0
|
||||
* GPIO 34 0x0000c000
|
||||
*/
|
||||
#define CONFIG_SYS_DM36x_PINMUX4 0x00002655
|
||||
|
||||
/*
|
||||
* Default environment settings
|
||||
*/
|
||||
|
||||
#define DVN4XX_UBOOT_ADDR_R_RAM 0x80000000
|
||||
/* (DVN4XX_UBOOT_ADDR_R_RAM + CONFIG_SYS_NAND_PAGE_SIZE) */
|
||||
#define DVN4XX_UBOOT_ADDR_R_NAND_SPL 0x80000800
|
||||
/*
|
||||
* (DVN4XX_UBOOT_ADDR_R_NAND_SPL + (CONFIG_SYS_NROF_PAGES_NAND_SPL * \
|
||||
* CONFIG_SYS_NAND_PAGE_SIZE))
|
||||
*/
|
||||
#define DVN4XX_UBOOT_ADDR_R_UBOOT 0x80003800
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"u_boot_addr_r=" __stringify(DVN4XX_UBOOT_ADDR_R_RAM) "\0" \
|
||||
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.ubl\0" \
|
||||
"load=tftp ${u_boot_addr_r} ${u-boot}\0" \
|
||||
"pagesz=" __stringify(CONFIG_SYS_NAND_PAGE_SIZE) "\0" \
|
||||
"writeheader=nandrbl rbl;nand erase 20000 ${pagesz};" \
|
||||
"nand write ${u_boot_addr_r} 20000 ${pagesz};" \
|
||||
"nandrbl uboot\0" \
|
||||
"writenand_spl=nandrbl rbl;nand erase 0 3000;" \
|
||||
"nand write " __stringify(DVN4XX_UBOOT_ADDR_R_NAND_SPL) \
|
||||
" 0 3000;nandrbl uboot\0" \
|
||||
"writeuboot=nandrbl uboot;" \
|
||||
"nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
|
||||
__stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
|
||||
";nand write " __stringify(DVN4XX_UBOOT_ADDR_R_UBOOT) \
|
||||
" " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
|
||||
__stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
|
||||
"update=run load writenand_spl writeuboot\0" \
|
||||
"bootcmd=run net_nfs\0" \
|
||||
"rootpath=/opt/eldk-arm/arm\0" \
|
||||
"mtdids=" MTDIDS_DEFAULT "\0" \
|
||||
"mtdparts=" MTDPARTS_DEFAULT "\0" \
|
||||
"netdev=eth0\0" \
|
||||
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
||||
"addmisc=setenv bootargs ${bootargs} app_reset=${app_reset}\0" \
|
||||
"addcon=setenv bootargs ${bootargs} console=ttyS0," \
|
||||
"${baudrate}n8\0" \
|
||||
"addip=setenv bootargs ${bootargs} " \
|
||||
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
||||
":${hostname}:${netdev}:off eth=${ethaddr} panic=1\0" \
|
||||
"rootpath=/opt/eldk-arm/arm\0" \
|
||||
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
||||
"nfsroot=${serverip}:${rootpath}\0" \
|
||||
"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \
|
||||
"kernel_addr_r=80600000\0" \
|
||||
"load_kernel=tftp ${kernel_addr_r} ${bootfile}\0" \
|
||||
"ubi_load_kernel=ubi part ubi 2048;ubifsmount ubi:${img_volume};" \
|
||||
"ubifsload ${kernel_addr_r} boot/uImage\0" \
|
||||
"fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \
|
||||
"img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \
|
||||
"img_file=" __stringify(CONFIG_HOSTNAME) "/ait.itb\0" \
|
||||
"header_addr=20000\0" \
|
||||
"img_writeheader=nandrbl rbl;" \
|
||||
"nand erase ${header_addr} ${pagesz};" \
|
||||
"nand write ${img_addr_r} ${header_addr} ${pagesz};" \
|
||||
"nandrbl uboot\0" \
|
||||
"img_writespl=nandrbl rbl;nand erase 0 3000;" \
|
||||
"nand write ${img_addr_r} 0 3000;nandrbl uboot\0" \
|
||||
"img_writeuboot=nandrbl uboot;" \
|
||||
"nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
|
||||
__stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE) \
|
||||
";nand write ${img_addr_r} " \
|
||||
__stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " " \
|
||||
__stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0" \
|
||||
"img_writedfenv=ubi part ubi 2048;" \
|
||||
"ubi write ${img_addr_r} default ${filesize}\0" \
|
||||
"img_volume=rootfs1\0" \
|
||||
"img_writeramdisk=ubi part ubi 2048;" \
|
||||
"ubi write ${img_addr_r} ${img_volume} ${filesize}\0" \
|
||||
"load_img=tftp ${fit_addr_r} ${img_file}\0" \
|
||||
"net_nfs=run load_kernel; " \
|
||||
"run nfsargs addip addcon addmtd addmisc;" \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"ubi_ubi=run ubi_load_kernel; " \
|
||||
"run ubiargs addip addcon addmtd addmisc;" \
|
||||
"bootm ${kernel_addr_r}\0" \
|
||||
"ubiargs=setenv bootargs ubi.mtd=4,2048" \
|
||||
" root=ubi0:${img_volume} rw rootfstype=ubifs\0" \
|
||||
"app_reset=no\0" \
|
||||
"dvn_app_vers=void\0" \
|
||||
"dvn_boot_vers=void\0" \
|
||||
"savenewvers=run savetmpparms restoreparms; saveenv;" \
|
||||
"run restoretmpparms\0" \
|
||||
"savetmpparms=setenv y_ipaddr ${ipaddr};" \
|
||||
"setenv y_netmask ${netmask};" \
|
||||
"setenv y_serverip ${serverip};" \
|
||||
"setenv y_gatewayip ${gatewayip}\0" \
|
||||
"saveparms=setenv x_ipaddr ${ipaddr};" \
|
||||
"setenv x_netmask ${netmask};" \
|
||||
"setenv x_serverip ${serverip};" \
|
||||
"setenv x_gatewayip ${gatewayip}\0" \
|
||||
"restoreparms=setenv ipaddr ${x_ipaddr};" \
|
||||
"setenv netmask ${x_netmask};" \
|
||||
"setenv serverip ${x_serverip};" \
|
||||
"setenv gatewayip ${x_gatewayip}\0" \
|
||||
"restoretmpparms=setenv ipaddr ${y_ipaddr};" \
|
||||
"setenv netmask ${y_netmask};" \
|
||||
"setenv serverip ${y_serverip};" \
|
||||
"setenv gatewayip ${y_gatewayip}\0" \
|
||||
"\0"
|
||||
|
||||
/* USB Configuration */
|
||||
#define CONFIG_USB_DAVINCI
|
||||
#define CONFIG_USB_MUSB_HCD
|
||||
#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN | \
|
||||
USBPHY_PHY24MHZ)
|
||||
|
||||
#define CONFIG_CMD_USB /* include support for usb cmd */
|
||||
#define CONFIG_USB_STORAGE /* MSC class support */
|
||||
#define CONFIG_CMD_STORAGE /* inclue support for usb-storage cmd */
|
||||
#define CONFIG_CMD_FAT /* inclue support for FAT/storage */
|
||||
#define CONFIG_DOS_PARTITION /* inclue support for FAT/storage */
|
||||
|
||||
#undef DAVINCI_DM365EVM
|
||||
#define PINMUX4_USBDRVBUS_BITCLEAR 0x3000
|
||||
#define PINMUX4_USBDRVBUS_BITSET 0x2000
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user