leandrof/u-boot
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi

Browse Source 
The bulk of it is (finally!) some DT sync from the kernel. We refrained
from syncing one incompatible change, as this would spoil booting Linux
kernels before v5.13 with U-Boot's DT (via UEFI, for instance).
I test booted Linux v5.18 and v5.4 with that new DT on some boards, and
the headless peripherals (MMC, USB, Ethernet) seemed to work.
The rest are fixes:
- silencing missing clock warnings due to the new pinctrl driver
- fixing "UART0 on PortF", allowing UART access through the SD card pins
- add an F1C100s clock driver, to enable MMC support (SPI comes later)
- some cleanups for CONS_INDEX_n in Kconfig

Tested on BananaPi-M1, Pine64-LTS, Pine-H64, X96-Mate (H616) and
OrangePi-Zero.
This commit is contained in:
Tom Rini
2022-05-24 23:29:00 -04:00
parent 1b04a961c6 7495051219
commit 7e0edcadb0
185 changed files with 5525 additions and 2517 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
arch/arm/dts/Makefile
View File

@@ -554,11 +554,14 @@ dtb-$(CONFIG_MACH_SUN5I) += \
sun5i-a13-hsg-h702.dtb \
sun5i-a13-inet-86vs.dtb \
sun5i-a13-inet-98v-rev2.dtb \
sun5i-a13-licheepi-one.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun5i-a13-pocketbook-touch-lux-3.dtb \
sun5i-a13-q8-tablet.dtb \
sun5i-a13-utoo-p66.dtb \
sun5i-gr8-chip-pro.dtb \
sun5i-gr8-evb.dtb \
sun5i-r8-chip.dtb
dtb-$(CONFIG_MACH_SUN6I) += \
sun6i-a31-app4-evb1.dtb \
@@ -582,11 +585,13 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-haoyu-marsboard.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
sun7i-a20-icnova-swac.dtb \
sun7i-a20-itead-ibox.dtb \
sun7i-a20-lamobo-r1.dtb \
sun7i-a20-linutronix-testbox-v2.dtb \
sun7i-a20-m3.dtb \
sun7i-a20-m5.dtb \
sun7i-a20-mk808c.dtb \
@@ -594,6 +599,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-olimex-som204-evb.dtb \
sun7i-a20-olimex-som204-evb-emmc.dtb \
sun7i-a20-olinuxino-lime.dtb \
sun7i-a20-olinuxino-lime-emmc.dtb \
sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-lime2-emmc.dtb \
sun7i-a20-olinuxino-micro.dtb \
@@ -610,17 +616,22 @@ dtb-$(CONFIG_MACH_SUN8I_A23) += \
sun8i-a23-evb.dtb \
sun8i-a23-gt90h-v4.dtb \
sun8i-a23-inet86dz.dtb \
sun8i-a23-ippo-q8h-v1.2.dtb \
sun8i-a23-ippo-q8h-v5.dtb \
sun8i-a23-polaroid-mid2407pxe03.dtb \
sun8i-a23-polaroid-mid2809pxe04.dtb \
sun8i-a23-q8-tablet.dtb
dtb-$(CONFIG_MACH_SUN8I_A33) += \
sun8i-a33-et-q8-v1.6.dtb \
sun8i-a33-ga10h-v1.1.dtb \
sun8i-a33-inet-d978-rev2.dtb \
sun8i-a33-ippo-q8h-v1.2.dtb \
sun8i-a33-olinuxino.dtb \
sun8i-a33-q8-tablet.dtb \
sun8i-a33-sinlinx-sina33.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic-edition.dtb \
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
sun8i-r16-parrot.dtb
dtb-$(CONFIG_MACH_SUN8I_A83T) += \
sun8i-a83t-allwinner-h8homlet-v2.dtb \
@@ -643,6 +654,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-nanopi-m1-plus.dtb \
sun8i-h3-nanopi-neo.dtb \
sun8i-h3-nanopi-neo-air.dtb \
sun8i-h3-nanopi-r1.dtb \
sun8i-h3-orangepi-2.dtb \
sun8i-h3-orangepi-lite.dtb \
sun8i-h3-orangepi-one.dtb \
@@ -655,9 +667,13 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-zeropi.dtb
dtb-$(CONFIG_MACH_SUN8I_R40) += \
sun8i-r40-bananapi-m2-ultra.dtb \
sun8i-r40-oka40i-c.dtb \
sun8i-t3-cqa3t-bv3.dtb \
sun8i-v40-bananapi-m2-berry.dtb
dtb-$(CONFIG_MACH_SUN8I_V3S) += \
sun8i-s3-elimo-initium.dtb \
sun8i-s3-pinecube.dtb \
sun8i-v3-sl631-imx179.dtb \
sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-bananapi-m2-plus.dtb \
@@ -678,7 +694,9 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
sun50i-h6-orangepi-lite2.dtb \
sun50i-h6-orangepi-one-plus.dtb \
sun50i-h6-pine-h64.dtb \
sun50i-h6-tanix-tx6.dtb
sun50i-h6-pine-h64-model-b.dtb \
sun50i-h6-tanix-tx6.dtb \
sun50i-h6-tanix-tx6-mini.dtb
dtb-$(CONFIG_MACH_SUN50I_H616) += \
sun50i-h616-orangepi-zero2.dtb
dtb-$(CONFIG_MACH_SUN50I) += \

11
arch/arm/dts/axp22x.dtsi
View File

@@ -52,12 +52,17 @@
interrupt-controller;
#interrupt-cells = <1>;
ac_power_supply: ac-power-supply {
ac_power_supply: ac-power {
compatible = "x-powers,axp221-ac-power-supply";
status = "disabled";
};
battery_power_supply: battery-power-supply {
axp_adc: adc {
compatible = "x-powers,axp221-adc";
#io-channel-cells = <1>;
};
battery_power_supply: battery-power {
compatible = "x-powers,axp221-battery-power-supply";
status = "disabled";
};
@@ -158,7 +163,7 @@
};
};
usb_power_supply: usb_power_supply {
usb_power_supply: usb-power {
compatible = "x-powers,axp221-usb-power-supply";
status = "disabled";
};

10
arch/arm/dts/axp803.dtsi
View File

@@ -10,7 +10,7 @@
interrupt-controller;
#interrupt-cells = <1>;
ac_power_supply: ac-power-supply {
ac_power_supply: ac-power {
compatible = "x-powers,axp803-ac-power-supply",
"x-powers,axp813-ac-power-supply";
status = "disabled";
@@ -26,18 +26,18 @@
gpio-controller;
#gpio-cells = <2>;
gpio0_ldo: gpio0-ldo {
gpio0_ldo: gpio0-ldo-pin {
pins = "GPIO0";
function = "ldo";
};
gpio1_ldo: gpio1-ldo {
gpio1_ldo: gpio1-ldo-pin {
pins = "GPIO1";
function = "ldo";
};
};
battery_power_supply: battery-power-supply {
battery_power_supply: battery-power {
compatible = "x-powers,axp803-battery-power-supply",
"x-powers,axp813-battery-power-supply";
status = "disabled";
@@ -147,7 +147,7 @@
};
};
usb_power_supply: usb-power-supply {
usb_power_supply: usb-power {
compatible = "x-powers,axp803-usb-power-supply",
"x-powers,axp813-usb-power-supply";
status = "disabled";

15
arch/arm/dts/axp81x.dtsi
View File

@@ -48,6 +48,11 @@
interrupt-controller;
#interrupt-cells = <1>;
ac_power_supply: ac-power {
compatible = "x-powers,axp813-ac-power-supply";
status = "disabled";
};
axp_adc: adc {
compatible = "x-powers,axp813-adc";
#io-channel-cells = <1>;
@@ -58,18 +63,18 @@
gpio-controller;
#gpio-cells = <2>;
gpio0_ldo: gpio0-ldo {
gpio0_ldo: gpio0-ldo-pin {
pins = "GPIO0";
function = "ldo";
};
gpio1_ldo: gpio1-ldo {
gpio1_ldo: gpio1-ldo-pin {
pins = "GPIO1";
function = "ldo";
};
};
battery_power_supply: battery-power-supply {
battery_power_supply: battery-power {
compatible = "x-powers,axp813-battery-power-supply";
status = "disabled";
};
@@ -166,4 +171,8 @@
status = "disabled";
};
};
usb_power_supply: usb-power {
compatible = "x-powers,axp813-usb-power-supply";
};
};

22
arch/arm/dts/sun4i-a10-inet97fv2.dts
View File

@@ -1,7 +1,7 @@
/*
* Copyright 2014 Open Source Support GmbH
*
* David Lanzend<EFBFBD>rfer <david.lanzendoerfer@o2s.ch>
* David Lanzendörfer <david.lanzendoerfer@o2s.ch>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -150,20 +150,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -209,10 +195,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

2
arch/arm/dts/sun50i-a64-cpu-opp.dtsi
View File

@@ -4,7 +4,7 @@
*/
/ {
cpu0_opp_table: opp_table0 {
cpu0_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;

2
arch/arm/dts/sun50i-a64-orangepi-win.dts
View File

@@ -343,7 +343,7 @@
&spi0 {
status = "okay";
spi-flash@0 {
flash@0 {
compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;

1
arch/arm/dts/sun50i-a64-pinebook.dts
View File

@@ -15,6 +15,7 @@
/ {
model = "Pinebook";
compatible = "pine64,pinebook", "allwinner,sun50i-a64";
chassis-type = "laptop";
aliases {
serial0 = &uart0;

27
arch/arm/dts/sun50i-a64-pinephone.dtsi
View File

@@ -12,6 +12,8 @@
#include <dt-bindings/pwm/pwm.h>
/ {
chassis-type = "handset";
aliases {
ethernet0 = &rtl8723cs;
serial0 = &uart0;
@@ -25,6 +27,11 @@
/* Backlight configuration differs per PinePhone revision. */
};
bt_sco_codec: bt-sco-codec {
#sound-dai-cells = <1>;
compatible = "linux,bt-sco";
};
chosen {
stdout-path = "serial0:115200n8";
};
@@ -91,6 +98,8 @@
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&aif3_pins>;
status = "okay";
};
@@ -426,6 +435,7 @@
&sound {
status = "okay";
simple-audio-card,name = "PinePhone";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
simple-audio-card,widgets = "Microphone", "Headset Microphone",
"Microphone", "Internal Microphone",
@@ -447,6 +457,23 @@
"MIC1", "Internal Microphone",
"Headset Microphone", "HBIAS",
"MIC2", "Headset Microphone";
simple-audio-card,dai-link@2 {
format = "dsp_a";
frame-master = <&link2_codec>;
bitclock-master = <&link2_codec>;
bitclock-inversion;
link2_cpu: cpu {
sound-dai = <&bt_sco_codec 0>;
};
link2_codec: codec {
sound-dai = <&codec 2>;
dai-tdm-slot-num = <1>;
dai-tdm-slot-width = <32>;
};
};
};
&uart0 {

29
arch/arm/dts/sun50i-a64-pinetab.dts
View File

@@ -16,6 +16,7 @@
/ {
model = "PineTab, Development Sample";
compatible = "pine64,pinetab", "allwinner,sun50i-a64";
chassis-type = "tablet";
aliases {
serial0 = &uart0;
@@ -35,6 +36,17 @@
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "c";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
i2c-csi {
compatible = "i2c-gpio";
sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
@@ -77,7 +89,7 @@
sound-name-prefix = "Speaker Amp";
};
vdd_bl: regulator@0 {
vdd_bl: regulator {
compatible = "regulator-fixed";
regulator-name = "bl-3v3";
regulator-min-microvolt = <3300000>;
@@ -410,6 +422,21 @@
regulator-name = "vcc-rtc";
};
&simplefb_hdmi {
vcc-hdmi-supply = <&reg_dldo1>;
};
&hdmi {
hvcc-supply = <&reg_dldo1>;
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&sound {
status = "okay";
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;

4
arch/arm/dts/sun50i-a64-teres-i.dts
View File

@@ -14,6 +14,7 @@
/ {
model = "Olimex A64 Teres-I";
compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64";
chassis-type = "laptop";
aliases {
serial0 = &uart0;
@@ -139,6 +140,8 @@
#size-cells = <0>;
port@0 {
reg = <0>;
anx6345_in: endpoint {
remote-endpoint = <&tcon0_out_anx6345>;
};
@@ -206,7 +209,6 @@
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
wakeup-source;
};
};

93
arch/arm/dts/sun50i-a64.dtsi
View File

@@ -102,6 +102,22 @@
status = "disabled";
};
gpu_opp_table: opp-table-gpu {
compatible = "operating-points-v2";
opp-120000000 {
opp-hz = /bits/ 64 <120000000>;
};
opp-312000000 {
opp-hz = /bits/ 64 <312000000>;
};
opp-432000000 {
opp-hz = /bits/ 64 <432000000>;
};
};
osc24M: osc24M_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
@@ -131,12 +147,10 @@
};
sound: sound {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-audio-card";
simple-audio-card,name = "sun50i-a64-audio";
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&cpudai>;
simple-audio-card,bitclock-master = <&cpudai>;
simple-audio-card,mclk-fs = <128>;
simple-audio-card,aux-devs = <&codec_analog>;
simple-audio-card,routing =
"Left DAC", "DACL",
@@ -145,12 +159,19 @@
"ADCR", "Right ADC";
status = "disabled";
cpudai: simple-audio-card,cpu {
sound-dai = <&dai>;
};
simple-audio-card,dai-link@0 {
format = "i2s";
frame-master = <&link0_cpu>;
bitclock-master = <&link0_cpu>;
mclk-fs = <128>;
link_codec: simple-audio-card,codec {
sound-dai = <&codec>;
link0_cpu: cpu {
sound-dai = <&dai>;
};
link0_codec: codec {
sound-dai = <&codec 0>;
};
};
};
@@ -658,6 +679,18 @@
interrupt-controller;
#interrupt-cells = <3>;
/omit-if-no-ref/
aif2_pins: aif2-pins {
pins = "PB4", "PB5", "PB6", "PB7";
function = "aif2";
};
/omit-if-no-ref/
aif3_pins: aif3-pins {
pins = "PG10", "PG11", "PG12", "PG13";
function = "aif3";
};
csi_pins: csi-pins {
pins = "PE0", "PE2", "PE3", "PE4", "PE5", "PE6",
"PE7", "PE8", "PE9", "PE10", "PE11";
@@ -798,6 +831,23 @@
};
};
timer@1c20c00 {
compatible = "allwinner,sun50i-a64-timer",
"allwinner,sun8i-a23-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun50i-a64-wdt",
"allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
spdif: spdif@1c21000 {
#sound-dai-cells = <0>;
compatible = "allwinner,sun50i-a64-spdif",
@@ -878,7 +928,7 @@
};
codec: codec@1c22e00 {
#sound-dai-cells = <0>;
#sound-dai-cells = <1>;
compatible = "allwinner,sun50i-a64-codec",
"allwinner,sun8i-a33-codec";
reg = <0x01c22e00 0x600>;
@@ -1067,6 +1117,7 @@
clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_BUS_GPU>;
operating-points-v2 = <&gpu_opp_table>;
};
gic: interrupt-controller@1c81000 {
@@ -1093,8 +1144,14 @@
mbus: dram-controller@1c62000 {
compatible = "allwinner,sun50i-a64-mbus";
reg = <0x01c62000 0x1000>;
clocks = <&ccu 112>;
reg = <0x01c62000 0x1000>,
<0x01c63000 0x1000>;
reg-names = "mbus", "dram";
clocks = <&ccu CLK_MBUS>,
<&ccu CLK_DRAM>,
<&ccu CLK_BUS_DRAM>;
clock-names = "mbus", "dram", "bus";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
dma-ranges = <0x00000000 0x40000000 0xc0000000>;
@@ -1167,8 +1224,8 @@
reg-io-width = <1>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
<&ccu CLK_HDMI>;
clock-names = "iahb", "isfr", "tmds";
<&ccu CLK_HDMI>, <&rtc 0>;
clock-names = "iahb", "isfr", "tmds", "cec";
resets = <&ccu RST_BUS_HDMI1>;
reset-names = "ctrl";
phys = <&hdmi_phy>;
@@ -1321,13 +1378,5 @@
#address-cells = <1>;
#size-cells = <0>;
};
wdt0: watchdog@1c20ca0 {
compatible = "allwinner,sun50i-a64-wdt",
"allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
};
};

2
arch/arm/dts/sun50i-h5-cpu-opp.dtsi
View File

@@ -2,7 +2,7 @@
// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
/ {
cpu_opp_table: cpu-opp-table {
cpu_opp_table: opp-table-cpu {
compatible = "operating-points-v2";
opp-shared;

9
arch/arm/dts/sun50i-h5-nanopi-r1s-h5.dts
View File

@@ -142,9 +142,16 @@
status = "okay";
eeprom@51 {
compatible = "microchip,24c02";
compatible = "microchip,24c02", "atmel,24c02";
reg = <0x51>;
pagesize = <16>;
read-only;
#address-cells = <1>;
#size-cells = <1>;
eth_mac1: mac-address@fa {
reg = <0xfa 0x06>;
};
};
};

6
arch/arm/dts/sun50i-h5.dtsi
View File

@@ -217,7 +217,7 @@
};
};
gpu_thermal {
gpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&ths 1>;
@@ -233,6 +233,10 @@
compatible = "allwinner,sun50i-h5-de2-clk";
};
&mbus {
compatible = "allwinner,sun50i-h5-mbus";
};
&mmc0 {
compatible = "allwinner,sun50i-h5-mmc",
"allwinner,sun50i-a64-mmc";

38
arch/arm/dts/sun50i-h6-beelink-gs1.dts
View File

@@ -150,12 +150,28 @@
vcc-pg-supply = <&reg_aldo1>;
};
&r_i2c {
&r_ir {
linux,rc-map-name = "rc-beelink-gs1";
status = "okay";
};
&r_pio {
/*
* FIXME: We can't add that supply for now since it would
* create a circular dependency between pinctrl, the regulator
* and the RSB Bus.
*
* vcc-pl-supply = <&reg_aldo1>;
*/
vcc-pm-supply = <&reg_aldo1>;
};
&r_rsb {
status = "okay";
axp805: pmic@36 {
axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
reg = <0x36>;
reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -273,22 +289,6 @@
};
};
&r_ir {
linux,rc-map-name = "rc-beelink-gs1";
status = "okay";
};
&r_pio {
/*
* PL0 and PL1 are used for PMIC I2C
* don't enable the pl-supply else
* it will fail at boot
*
* vcc-pl-supply = <&reg_aldo1>;
*/
vcc-pm-supply = <&reg_aldo1>;
};
&spdif {
status = "okay";
};

2
arch/arm/dts/sun50i-h6-cpu-opp.dtsi
View File

@@ -3,7 +3,7 @@
// Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
/ {
cpu_opp_table: cpu-opp-table {
cpu_opp_table: opp-table-cpu {
compatible = "allwinner,sun50i-h6-operating-points";
nvmem-cells = <&cpu_speed_grade>;
opp-shared;

14
arch/arm/dts/sun50i-h6-orangepi-3.dts
View File

@@ -175,12 +175,16 @@
vcc-pg-supply = <&reg_vcc_wifi_io>;
};
&r_i2c {
&r_ir {
status = "okay";
};
&r_rsb {
status = "okay";
axp805: pmic@36 {
axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
reg = <0x36>;
reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -291,10 +295,6 @@
};
};
&r_ir {
status = "okay";
};
&rtc {
clocks = <&ext_osc32k>;
};

22
arch/arm/dts/sun50i-h6-orangepi.dtsi
View File

@@ -112,12 +112,20 @@
vcc-pg-supply = <&reg_aldo1>;
};
&r_i2c {
&r_ir {
status = "okay";
};
&r_pio {
vcc-pm-supply = <&reg_bldo3>;
};
&r_rsb {
status = "okay";
axp805: pmic@36 {
axp805: pmic@745 {
compatible = "x-powers,axp805", "x-powers,axp806";
reg = <0x36>;
reg = <0x745>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
@@ -232,14 +240,6 @@
};
};
&r_ir {
status = "okay";
};
&r_pio {
vcc-pm-supply = <&reg_bldo3>;
};
&rtc {
clocks = <&ext_osc32k>;
};

51
arch/arm/dts/sun50i-h6-pine-h64-model-b.dts Normal file
View File

@@ -0,0 +1,51 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
/*
* Copyright (C) 2019 Corentin LABBE <clabbe@baylibre.com>
*/
#include "sun50i-h6-pine-h64.dts"
/ {
model = "Pine H64 model B";
compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6";
/delete-node/ reg_gmac_3v3;
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
post-power-on-delay-ms = <200>;
};
};
&hdmi_connector {
/delete-property/ ddc-en-gpios;
};
&emac {
phy-supply = <&reg_aldo2>;
};
&mmc1 {
vmmc-supply = <&reg_cldo3>;
vqmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "realtek,rtl8723bs-bt";
device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
max-speed = <1500000>;
};
};

15
arch/arm/dts/sun50i-h6-tanix-tx6-mini.dts Normal file
View File

@@ -0,0 +1,15 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (c) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
/dts-v1/;
#include "sun50i-h6-tanix.dtsi"
/ {
model = "Tanix TX6 mini";
compatible = "oranth,tanix-tx6-mini", "allwinner,sun50i-h6";
};
&r_ir {
linux,rc-map-name = "rc-tanix-tx3mini";
};

115
arch/arm/dts/sun50i-h6-tanix-tx6.dts
View File

@@ -3,122 +3,27 @@
/dts-v1/;
#include "sun50i-h6.dtsi"
#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include "sun50i-h6-tanix.dtsi"
/ {
model = "Tanix TX6";
compatible = "oranth,tanix-tx6", "allwinner,sun50i-h6";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
reg_vcc3v3: vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_vdd_cpu_gpu: vdd-cpu-gpu {
compatible = "regulator-fixed";
regulator-name = "vdd-cpu-gpu";
regulator-min-microvolt = <1135000>;
regulator-max-microvolt = <1135000>;
};
};
&cpu0 {
cpu-supply = <&reg_vdd_cpu_gpu>;
};
&de {
status = "okay";
};
&dwc3 {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&gpu {
mali-supply = <&reg_vdd_cpu_gpu>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&r_ir {
linux,rc-map-name = "rc-tanix-tx5max";
status = "okay";
};
&uart0 {
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
uart-has-rtscts;
status = "okay";
};
&usb2otg {
dr_mode = "host";
status = "okay";
};
&usb2phy {
status = "okay";
};
&usb3phy {
status = "okay";
bluetooth {
compatible = "realtek,rtl8822cs-bt";
device-wake-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
host-wake-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
enable-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
};
};

189
arch/arm/dts/sun50i-h6-tanix.dtsi Normal file
View File

@@ -0,0 +1,189 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
// Copyright (c) 2019 Jernej Skrabec <jernej.skrabec@siol.net>
/dts-v1/;
#include "sun50i-h6.dtsi"
#include "sun50i-h6-cpu-opp.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
connector {
compatible = "hdmi-connector";
ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
/* used for FD650 LED display driver */
i2c {
compatible = "i2c-gpio";
sda-gpios = <&pio 7 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH6 */
scl-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PH5 */
i2c-gpio,delay-us = <5>;
};
reg_vcc1v8: regulator-vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_vcc3v3: regulator-vcc3v3 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_vdd_cpu_gpu: regulator-vdd-cpu-gpu {
compatible = "regulator-fixed";
regulator-name = "vdd-cpu-gpu";
regulator-min-microvolt = <1135000>;
regulator-max-microvolt = <1135000>;
};
sound-spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "sun50i-h6-spdif";
simple-audio-card,cpu {
sound-dai = <&spdif>;
};
simple-audio-card,codec {
sound-dai = <&spdif_out>;
};
};
spdif_out: spdif-out {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rtc 1>;
clock-names = "ext_clock";
reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
};
};
&cpu0 {
cpu-supply = <&reg_vdd_cpu_gpu>;
};
&de {
status = "okay";
};
&dwc3 {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci3 {
status = "okay";
};
&gpu {
mali-supply = <&reg_vdd_cpu_gpu>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v3>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
&mmc1 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc1v8>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
non-removable;
status = "okay";
};
&mmc2 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc1v8>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
mmc-hs200-1_8v;
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci3 {
status = "okay";
};
&pio {
vcc-pc-supply = <&reg_vcc1v8>;
vcc-pd-supply = <&reg_vcc3v3>;
vcc-pg-supply = <&reg_vcc1v8>;
};
&r_ir {
status = "okay";
};
&spdif {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
&usb2otg {
dr_mode = "host";
status = "okay";
};
&usb2phy {
status = "okay";
};
&usb3phy {
status = "okay";
};

26
arch/arm/dts/sun50i-h6.dtsi
View File

@@ -119,10 +119,10 @@
display_clocks: clock@0 {
compatible = "allwinner,sun50i-h6-de3-clk";
reg = <0x0 0x10000>;
clocks = <&ccu CLK_DE>,
<&ccu CLK_BUS_DE>;
clock-names = "mod",
"bus";
clocks = <&ccu CLK_BUS_DE>,
<&ccu CLK_DE>;
clock-names = "bus",
"mod";
resets = <&ccu RST_BUS_DE>;
#clock-cells = <1>;
#reset-cells = <1>;
@@ -153,6 +153,15 @@
};
};
video-codec-g2@1c00000 {
compatible = "allwinner,sun50i-h6-vpu-g2";
reg = <0x01c00000 0x1000>;
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_VP9>, <&ccu CLK_VP9>;
clock-names = "bus", "mod";
resets = <&ccu RST_BUS_VP9>;
};
video-codec@1c0e000 {
compatible = "allwinner,sun50i-h6-video-engine";
reg = <0x01c0e000 0x2000>;
@@ -271,6 +280,15 @@
};
};
timer@3009000 {
compatible = "allwinner,sun50i-h6-timer",
"allwinner,sun8i-a23-timer";
reg = <0x03009000 0xa0>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
watchdog: watchdog@30090a0 {
compatible = "allwinner,sun50i-h6-wdt",
"allwinner,sun6i-a31-wdt";

16
arch/arm/dts/sun5i-a10s-auxtek-t003.dts
View File

@@ -62,7 +62,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_t003>;
red {
led {
label = "t003-tv-dongle:red:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
default-state = "on";
@@ -75,8 +75,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -89,8 +87,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -106,13 +102,7 @@
};
&pio {
mmc0_cd_pin_t003: mmc0_cd_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-up;
};
led_pins_t003: led_pins@0 {
led_pins_t003: led-pin {
pins = "PB2";
function = "gpio_out";
drive-strength = <20>;
@@ -131,7 +121,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

35
arch/arm/dts/sun5i-a10s-auxtek-t004.dts
View File

@@ -62,7 +62,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_t004>;
red {
led {
label = "t004-tv-dongle:red:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
default-state = "on";
@@ -71,8 +71,6 @@
reg_vmmc1: vmmc1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
regulator-name = "vmmc1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -86,8 +84,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -100,8 +96,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -109,8 +103,6 @@
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vmmc1>;
bus-width = <4>;
non-removable;
@@ -127,24 +119,7 @@
};
&pio {
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PG12";
function = "gpio_in";
bias-pull-up;
};
mmc0_cd_pin_t004: mmc0_cd_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-up;
};
mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
pins = "PB18";
function = "gpio_out";
};
led_pins_t004: led_pins@0 {
led_pins_t004: led-pin {
pins = "PB2";
function = "gpio_out";
drive-strength = <20>;
@@ -158,7 +133,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
@@ -168,9 +143,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

31
arch/arm/dts/sun5i-a10s-mk802.dts
View File

@@ -59,10 +59,8 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_mk802>;
red {
led {
label = "mk802:red:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
};
@@ -74,8 +72,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -88,8 +84,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -97,8 +91,6 @@
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
@@ -113,33 +105,14 @@
status = "okay";
};
&pio {
led_pins_mk802: led_pins@0 {
pins = "PB2";
function = "gpio_out";
};
mmc0_cd_pin_mk802: mmc0_cd_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-up;
};
usb1_vbus_pin_mk802: usb1_vbus_pin@0 {
pins = "PB10";
function = "gpio_out";
};
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_mk802>;
gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

68
arch/arm/dts/sun5i-a10s-olinuxino-micro.dts
View File

@@ -79,7 +79,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxino>;
green {
led {
label = "a10s-olinuxino-micro:green:usr";
gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -97,8 +97,8 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_b>;
phy = <&phy1>;
pinctrl-0 = <&emac_pa_pins>;
phy-handle = <&phy1>;
status = "okay";
};
@@ -117,8 +117,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp152: pmic@30 {
@@ -130,11 +128,9 @@
#include "axp152.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
at24@50 {
eeprom@50 {
compatible = "atmel,24c16";
pagesize = <16>;
reg = <0x50>;
@@ -143,8 +139,6 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -152,35 +146,35 @@
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@191 {
button-191 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <191274>;
};
button@392 {
button-392 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <392644>;
};
button@601 {
button-601 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <601151>;
};
button@795 {
button-795 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
voltage = <795090>;
};
button@987 {
button-987 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@@ -197,8 +191,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -206,8 +198,6 @@
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */
@@ -223,34 +213,11 @@
};
&pio {
mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-up;
};
mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
pins = "PG13";
function = "gpio_in";
bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
led_pins_olinuxino: led-pin {
pins = "PE3";
function = "gpio_out";
drive-strength = <20>;
};
usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
pins = "PB10";
function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PG12";
function = "gpio_in";
bias-pull-up;
};
};
&reg_usb0_vbus {
@@ -259,15 +226,14 @@
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_b>,
<&spi2_cs0_pins_b>;
pinctrl-0 = <&spi2_pb_pins>,
<&spi2_cs0_pb_pin>;
status = "okay";
};
@@ -277,19 +243,19 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins_b>;
pinctrl-0 = <&uart2_pc_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_a>;
pinctrl-0 = <&uart3_pg_pins>;
status = "okay";
};
@@ -299,9 +265,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";

22
arch/arm/dts/sun5i-a10s-r7-tv-dongle.dts
View File

@@ -63,7 +63,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_r7>;
green {
led {
label = "r7-tv-dongle:green:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -76,8 +76,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
@@ -85,8 +83,6 @@
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
@@ -98,33 +94,21 @@
};
&pio {
mmc0_cd_pin_r7: mmc0_cd_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-up;
};
led_pins_r7: led_pins@0 {
led_pins_r7: led-pin {
pins = "PB2";
function = "gpio_out";
drive-strength = <20>;
};
usb1_vbus_pin_r7: usb1_vbus_pin@0 {
pins = "PG13";
function = "gpio_out";
};
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_r7>;
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

34
arch/arm/dts/sun5i-a10s-wobo-i5.dts
View File

@@ -61,10 +61,8 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_wobo_i5>;
blue {
led {
label = "a10s-wobo-i5:blue:usr";
gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -73,8 +71,6 @@
reg_emac_3v3: emac-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&emac_power_pin_wobo>;
regulator-name = "emac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -94,8 +90,8 @@
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
phy = <&phy1>;
pinctrl-0 = <&emac_pd_pins>;
phy-handle = <&phy1>;
status = "okay";
};
@@ -104,8 +100,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -126,8 +120,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
@@ -142,24 +134,6 @@
status = "okay";
};
&pio {
led_pins_wobo_i5: led_pins@0 {
pins = "PB2";
function = "gpio_out";
};
mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 {
pins = "PB3";
function = "gpio_in";
bias-pull-up;
};
emac_power_pin_wobo: emac_power_pin@0 {
pins = "PA02";
function = "gpio_out";
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -206,7 +180,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};

30
arch/arm/dts/sun5i-a10s.dtsi
View File

@@ -42,15 +42,11 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include "sun5i.dtsi"
#include <dt-bindings/dma/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
aliases {
ethernet0 = &emac;
};
@@ -60,7 +56,7 @@
#size-cells = <1>;
ranges;
framebuffer@2 {
framebuffer-lcd0-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -76,7 +72,7 @@
allwinner,pipelines = <&fe0>;
};
soc@1c00000 {
soc {
hdmi: hdmi@1c16000 {
compatible = "allwinner,sun5i-a10s-hdmi";
reg = <0x01c16000 0x1000>;
@@ -104,8 +100,6 @@
};
hdmi_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
@@ -125,20 +119,25 @@
compatible = "allwinner,sun5i-a10s-ccu";
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
};
&pio {
compatible = "allwinner,sun5i-a10s-pinctrl";
uart0_pins_a: uart0@0 {
uart0_pb_pins: uart0-pb-pins {
pins = "PB19", "PB20";
function = "uart0";
};
uart2_pins_b: uart2@1 {
uart2_pc_pins: uart2-pc-pins {
pins = "PC18", "PC19";
function = "uart2";
};
emac_pins_b: emac0@1 {
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
"PA7", "PA8", "PA9", "PA10",
@@ -147,27 +146,24 @@
function = "emac";
};
mmc1_pins_a: mmc1@0 {
mmc1_pins: mmc1-pins {
pins = "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8";
function = "mmc1";
drive-strength = <30>;
};
spi2_pins_b: spi2@1 {
spi2_pb_pins: spi2-pb-pins {
pins = "PB12", "PB13", "PB14";
function = "spi2";
};
spi2_cs0_pins_b: spi2_cs0@1 {
spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB11";
function = "spi2";
};
};
&sram_a {
};
&tcon0_out {
tcon0_out_hdmi: endpoint@2 {
reg = <2>;

2
arch/arm/dts/sun5i-a13-ampe-a76.dts
View File

@@ -23,6 +23,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};

41
arch/arm/dts/sun5i-a13-empire-electronix-d709.dts
View File

@@ -61,6 +61,7 @@
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
power-supply = <&reg_vcc3v3>;
/* TODO: backlight uses axp gpio1 as enable pin */
};
@@ -78,8 +79,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -91,8 +90,6 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
pcf8563: rtc@51 {
@@ -105,14 +102,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button@400 {
button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -121,8 +118,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -133,29 +128,9 @@
status = "okay";
};
&pio {
mmc0_cd_pin_d709: mmc0_cd_pin@0 {
pins = "PG0";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>;
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
@@ -197,7 +172,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
@@ -207,10 +182,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";

37
arch/arm/dts/sun5i-a13-hsg-h702.dts
View File

@@ -69,8 +69,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -80,8 +78,6 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
pcf8563: rtc@51 {
@@ -91,8 +87,6 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -100,14 +94,14 @@
vref-supply = <&reg_ldo2>;
status = "okay";
button@200 {
button-200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button@400 {
button-400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -116,8 +110,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -132,25 +124,6 @@
status = "okay";
};
&pio {
mmc0_cd_pin_h702: mmc0_cd_pin@0 {
pins = "PG0";
function = "gpio_in";
bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
pins = "PG1";
function = "gpio_in";
};
};
#include "axp209.dtsi"
&reg_dcdc2 {
@@ -191,7 +164,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
@@ -201,9 +174,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;

2
arch/arm/dts/sun5i-a13-inet-86vs.dts
View File

@@ -23,6 +23,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};

148
arch/arm/dts/sun5i-q8-common.dtsi → arch/arm/dts/sun5i-a13-licheepi-one.dts
View File

@@ -1,5 +1,9 @@
/*
* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
* Copyright 2016 Icenowy Zheng <icenowy@aosc.xyz>
*
* Based on sun5i-a13-olinuxino.dts, which is
* Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
* Copyright 2013 Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -39,26 +43,46 @@
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "sunxi-q8-common.dtsi"
#include <dt-bindings/pwm/pwm.h>
/dts-v1/;
#include "sun5i-a13.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Lichee Pi One";
compatible = "licheepi,licheepi-one", "allwinner,sun5i-a13";
aliases {
serial0 = &uart1;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
/* TODO: backlight uses axp gpio1 as enable pin */
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
label ="licheepi:red:usr";
gpios = <&pio 2 5 GPIO_ACTIVE_LOW>;
};
led-1 {
label ="licheepi:green:usr";
gpios = <&pio 2 19 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led-2 {
label ="licheepi:blue:usr";
gpios = <&pio 2 4 GPIO_ACTIVE_LOW>;
};
};
};
&cpu0 {
@@ -70,28 +94,55 @@
};
&i2c0 {
status = "okay";
axp209: pmic@34 {
compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
interrupt-controller;
#interrupt-cells = <1>;
};
};
&i2c1 {
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "disabled";
};
&i2c2 {
status = "disabled";
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button-984 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <984126>;
};
};
#include "axp209.dtsi"
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
vmmc-supply = <&reg_vcc3v0>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
broken-cd;
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pc_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
broken-cd;
status = "okay";
};
&ohci0 {
status = "okay";
};
@@ -99,35 +150,7 @@
status = "okay";
};
&pio {
mmc0_cd_pin_q8: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
allwinner,pins = "PG1";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
allwinner,pins = "PG2";
allwinner,function = "gpio_in";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
usb0_vbus_pin_a: usb0_vbus_pin@0 {
allwinner,pins = "PG12";
allwinner,function = "gpio_out";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
@@ -140,7 +163,7 @@
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-pll";
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
@@ -154,14 +177,26 @@
regulator-name = "avcc";
};
&reg_ldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "csi-1.8v";
};
&reg_ldo4 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "csi-2.8v";
};
&reg_usb0_vbus {
gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
gpio = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
@@ -171,10 +206,9 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_vcc5v0>;
status = "okay";
};

50
arch/arm/dts/sun5i-a13-olinuxino-micro.dts
View File

@@ -64,7 +64,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinom>;
power {
led {
label = "a13-olinuxino-micro:green:power";
gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -77,26 +77,18 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -112,56 +104,26 @@
};
&pio {
mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
pins = "PG0";
function = "gpio_in";
bias-pull-up;
};
led_pins_olinuxinom: led_pins@0 {
led_pins_olinuxinom: led-pin {
pins = "PG9";
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 {
pins = "PG12";
function = "gpio_out";
};
usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
pins = "PG11";
function = "gpio_out";
};
};
&reg_usb0_vbus {
pinctrl-0 = <&usb0_vbus_pin_olinuxinom>;
gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
@@ -171,10 +133,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";

56
arch/arm/dts/sun5i-a13-olinuxino.dts
View File

@@ -66,7 +66,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxino>;
power {
led {
gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
@@ -74,8 +74,6 @@
bridge {
compatible = "dumb-vga-dac";
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
@@ -123,8 +121,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -138,14 +134,10 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -153,35 +145,35 @@
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@191 {
button-191 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <191274>;
};
button@392 {
button-392 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <392644>;
};
button@601 {
button-601 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <601151>;
};
button@795 {
button-795 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
voltage = <795090>;
};
button@987 {
button-987 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
@@ -190,8 +182,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -207,34 +197,11 @@
};
&pio {
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
pins = "PG0";
function = "gpio_in";
bias-pull-up;
};
led_pins_olinuxino: led_pins@0 {
led_pins_olinuxino: led-pin {
pins = "PG9";
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
pins = "PG11";
function = "gpio_out";
};
};
&reg_usb0_vbus {
@@ -243,7 +210,6 @@
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -263,7 +229,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
@@ -273,10 +239,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";

258
arch/arm/dts/sun5i-a13-pocketbook-touch-lux-3.dts Normal file
View File

@@ -0,0 +1,258 @@
// SPDX-License-Identifier: GPL-2.0 OR MIT
/*
* Copyright 2019 Ondrej Jirman <megous@megous.com>
*/
/dts-v1/;
#include "sun5i-a13.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "PocketBook Touch Lux 3";
compatible = "pocketbook,touch-lux-3", "allwinner,sun5i-a13";
aliases {
serial0 = &uart1;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
enable-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
power-supply = <&reg_vcc3v3>;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led {
gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
default-state = "on";
};
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
label = "GPIO Keys";
key-right {
label = "Right";
linux,code = <KEY_RIGHT>;
gpios = <&pio 6 9 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG9 */
};
key-left {
label = "Left";
linux,code = <KEY_LEFT>;
gpios = <&pio 6 10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; /* PG10 */
};
};
reg_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "vdd-1v8-nor-ctp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pio 2 15 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_1v8_nor: regulator-nor {
compatible = "regulator-fixed";
regulator-name = "vdd-nor";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_1v8>;
regulator-always-on;
};
reg_1v8_ctp: regulator-ctp {
compatible = "regulator-fixed";
regulator-name = "vdd-ctp";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&pio 2 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_1v8>;
};
reg_3v3_mmc0: regulator-mmc0 {
compatible = "regulator-fixed";
regulator-name = "vdd-mmc0";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pio 4 4 GPIO_ACTIVE_LOW>; /* PE4 */
vin-supply = <&reg_vcc3v3>;
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&ehci0 {
status = "okay";
};
&i2c0 {
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupts = <0>;
};
};
#include "axp209.dtsi"
&i2c1 {
status = "okay";
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&i2c2 {
status = "okay";
/* Touchpanel is connected here. */
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button-200 {
label = "Home";
linux,code = <KEY_HOME>;
channel = <0>;
voltage = <200000>;
};
button-400 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <400000>;
};
};
&mmc0 {
vmmc-supply = <&reg_3v3_mmc0>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
status = "okay";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pc_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
status = "okay";
};
&ohci0 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vdd-int-pll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_ldo3 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc-wifi";
/* We need this otherwise the LDO3 would overload */
regulator-soft-start;
regulator-ramp-delay = <1600>;
};
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
status = "okay";
epd_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "macronix,mx25u4033", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <4000000>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "peripheral";
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
usb1_vbus-supply = <&reg_ldo3>;
status = "okay";
};

18
arch/arm/dts/sun5i-a13-q8-tablet.dts
View File

@@ -49,19 +49,13 @@
compatible = "allwinner,q8-a13", "allwinner,sun5i-a13";
panel: panel {
compatible = "urt,umsh-8596md-t", "simple-panel";
#address-cells = <1>;
#size-cells = <0>;
compatible = "bananapi,s070wv20-ct16";
power-supply = <&reg_vcc3v3>;
enable-gpios = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; /* AXP GPIO0 */
backlight = <&backlight>;
port@0 {
reg = <0>;
/* TODO: lcd panel uses axp gpio0 as enable pin */
backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;
panel_input: endpoint@0 {
reg = <0>;
port {
panel_input: endpoint {
remote-endpoint = <&tcon0_out_lcd>;
};
};

26
arch/arm/dts/sun5i-a13-utoo-p66.dts
View File

@@ -58,13 +58,11 @@
/delete-property/stdout-path;
};
i2c_lcd: i2c@0 {
i2c_lcd: i2c {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&i2c_lcd_pins>;
gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
sda-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */
scl-gpios = <&pio 6 10 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG10 */
i2c-gpio,delay-us = <5>;
};
};
@@ -79,13 +77,9 @@
allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */
};
&codec_pa_pin {
pins = "PG3";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
pinctrl-0 = <&mmc2_8bit_pins>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <8>;
non-removable;
@@ -98,14 +92,6 @@
};
};
&pio {
i2c_lcd_pins: i2c_lcd_pin@0 {
pins = "PG10", "PG12";
function = "gpio_out";
bias-pull-up;
};
};
&reg_usb0_vbus {
gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
};
@@ -128,7 +114,3 @@
/* The P66 uses the uart pins as gpios */
status = "disabled";
};
&usb0_vbus_pin_a {
pins = "PB4";
};

23
arch/arm/dts/sun5i-a13.dtsi
View File

@@ -42,17 +42,13 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include "sun5i.dtsi"
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
thermal-zones {
cpu_thermal {
cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -88,7 +84,7 @@
allwinner,pipelines = <&fe0>;
};
soc@1c00000 {
soc {
pwm: pwm@1c20e00 {
compatible = "allwinner,sun5i-a13-pwm";
reg = <0x01c20e00 0xc>;
@@ -106,15 +102,14 @@
&cpu0 {
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
operating-points =
/* kHz uV */
1008000 1400000
912000 1350000
864000 1300000
624000 1200000
576000 1200000
432000 1200000
>;
<1008000 1400000>,
<912000 1350000>,
<864000 1300000>,
<624000 1200000>,
<576000 1200000>,
<432000 1200000>;
#cooling-cells = <2>;
};

38
arch/arm/dts/sun5i-gr8-chip-pro.dts
View File

@@ -79,8 +79,6 @@
mmc0_pwrseq: mmc0_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_reg_on_pin_chip_pro>;
reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */
};
};
@@ -94,8 +92,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -114,20 +110,16 @@
#include "axp209.dtsi"
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "disabled";
};
&i2s0 {
pinctrl-names = "default";
pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>;
pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
status = "disabled";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc0_pwrseq>;
bus-width = <4>;
@@ -137,12 +129,10 @@
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>;
pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
status = "okay";
nand@0 {
#address-cells = <2>;
#size-cells = <2>;
reg = <0>;
allwinner,rb = <0>;
nand-ecc-mode = "hw";
@@ -157,21 +147,9 @@
status = "okay";
};
&pio {
usb0_id_pin_chip_pro: usb0-id-pin@0 {
pins = "PG2";
function = "gpio_in";
};
wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 {
pins = "PB10";
function = "gpio_out";
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>, <&pwm1_pins>;
pinctrl-0 = <&pwm0_pin>, <&pwm1_pins>;
status = "disabled";
};
@@ -220,19 +198,19 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>, <&uart1_cts_rts_pins_a>;
pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>;
pinctrl-0 = <&uart2_pd_pins>, <&uart2_cts_rts_pd_pins>;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>;
pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
status = "okay";
};
@@ -253,9 +231,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_pin_chip_pro>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <&reg_vcc5v0>;
status = "okay";

333
arch/arm/dts/sun5i-gr8-evb.dts Normal file
View File

@@ -0,0 +1,333 @@
/*
* Copyright 2016 Free Electrons
* Copyright 2016 NextThing Co
*
* Mylène Josserand <mylene.josserand@free-electrons.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun5i-gr8.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "NextThing GR8-EVB";
compatible = "nextthing,gr8-evb", "nextthing,gr8";
aliases {
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
serial0 = &uart1;
serial1 = &uart2;
};
chosen {
stdout-path = "serial0:115200n8";
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 10000 0>;
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_vcc3v3>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
};
sound-analog {
compatible = "simple-audio-card";
simple-audio-card,name = "gr8-evb-wm8978";
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <512>;
simple-audio-card,cpu {
sound-dai = <&i2s0>;
};
simple-audio-card,codec {
sound-dai = <&wm8978>;
};
};
sound-spdif {
compatible = "simple-audio-card";
simple-audio-card,name = "On-board SPDIF";
simple-audio-card,cpu {
sound-dai = <&spdif>;
};
simple-audio-card,codec {
sound-dai = <&spdif_out>;
};
};
spdif_out: spdif-out {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
};
};
&be0 {
status = "okay";
};
&codec {
status = "okay";
};
&ehci0 {
status = "okay";
};
&i2c0 {
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
/*
* The interrupt is routed through the "External Fast
* Interrupt Request" pin (ball G13 of the module)
* directly to the main interrupt controller, without
* any other controller interfering.
*/
interrupts = <0>;
};
};
#include "axp209.dtsi"
&i2c1 {
status = "okay";
wm8978: codec@1a {
#sound-dai-cells = <0>;
compatible = "wlf,wm8978";
reg = <0x1a>;
};
pcf8563: rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
&i2c2 {
status = "okay";
};
&i2s0 {
pinctrl-names = "default";
pinctrl-0 = <&i2s0_mclk_pin>, <&i2s0_data_pins>;
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&lradc {
vref-supply = <&reg_ldo2>;
status = "okay";
button-190 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
button-390 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
button-600 {
label = "Menu";
linux,code = <KEY_MENU>;
channel = <0>;
voltage = <600000>;
};
button-800 {
label = "Search";
linux,code = <KEY_SEARCH>;
channel = <0>;
voltage = <800000>;
};
button-980 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;
voltage = <980000>;
};
button-1180 {
label = "Esc";
linux,code = <KEY_ESC>;
channel = <0>;
voltage = <1180000>;
};
button-1400 {
label = "Enter";
linux,code = <KEY_ENTER>;
channel = <0>;
voltage = <1400000>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
status = "okay";
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
/* MLC Support sucks for now */
status = "disabled";
};
&ohci0 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
status = "okay";
};
&reg_dcdc2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
regulator-always-on;
};
&reg_dcdc3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1300000>;
regulator-name = "vdd-sys";
regulator-always-on;
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <3300000>;
regulator-name = "avcc";
regulator-always-on;
};
&reg_usb1_vbus {
gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&rtp {
allwinner,ts-attached;
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
&tve0 {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pins>;
status = "okay";
};
&usb_otg {
/*
* The GR8-EVB has a somewhat interesting design. There's a
* pin supposed to control VBUS, an ID pin, a VBUS detect pin,
* so everything should work just fine.
*
* Except that the pin supposed to control VBUS is not
* connected to any controllable output, neither to the SoC
* through a GPIO or to the PMIC, and it is pulled down,
* meaning that we will never be able to enable VBUS on this
* board.
*/
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb1_vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};

12
arch/arm/dts/sun5i-gr8.dtsi
View File

@@ -54,7 +54,7 @@
allwinner,pipelines = <&fe0>;
};
soc@1c00000 {
soc {
pwm: pwm@1c20e00 {
compatible = "allwinner,sun5i-a10s-pwm";
reg = <0x01c20e00 0xc>;
@@ -98,28 +98,28 @@
&pio {
compatible = "nextthing,gr8-pinctrl";
i2s0_data_pins_a: i2s0-data@0 {
i2s0_data_pins: i2s0-data-pins {
pins = "PB6", "PB7", "PB8", "PB9";
function = "i2s0";
};
i2s0_mclk_pins_a: i2s0-mclk@0 {
i2s0_mclk_pin: i2s0-mclk-pin {
pins = "PB5";
function = "i2s0";
};
pwm1_pins: pwm1 {
pwm1_pins: pwm1-pin {
pins = "PG13";
function = "pwm1";
};
spdif_tx_pins_a: spdif@0 {
spdif_tx_pin: spdif-tx-pin {
pins = "PB10";
function = "spdif";
bias-pull-up;
};
uart1_cts_rts_pins_a: uart1-cts-rts@0 {
uart1_cts_rts_pins: uart1-cts-rts-pins {
pins = "PG5", "PG6";
function = "uart1";
};

52
arch/arm/dts/sun5i-r8-chip.dts
View File

@@ -79,16 +79,12 @@
mmc0_pwrseq: mmc0_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&chip_wifi_reg_on_pin>;
reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */
};
onewire {
compatible = "w1-gpio";
gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */
pinctrl-names = "default";
pinctrl-0 = <&chip_w1_pin>;
gpios = <&pio 3 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PD2 */
};
};
@@ -109,8 +105,6 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
axp209: pmic@34 {
@@ -137,14 +131,10 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "disabled";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
xio: gpio@38 {
@@ -161,13 +151,11 @@
};
};
&mmc0_pins_a {
&mmc0_pins {
bias-pull-up;
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>;
vmmc-supply = <&reg_vcc3v3>;
mmc-pwrseq = <&mmc0_pwrseq>;
bus-width = <4>;
@@ -183,29 +171,6 @@
status = "okay";
};
&pio {
chip_vbus_pin: chip_vbus_pin@0 {
pins = "PB10";
function = "gpio_out";
};
chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 {
pins = "PC19";
function = "gpio_out";
};
chip_id_det_pin: chip_id_det_pin@0 {
pins = "PG2";
function = "gpio_in";
};
chip_w1_pin: chip_w1_pin@0 {
pins = "PD2";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dcdc2 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
@@ -260,7 +225,6 @@
};
&reg_usb0_vbus {
pinctrl-0 = <&chip_vbus_pin>;
vin-supply = <&reg_vcc5v0>;
gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
status = "okay";
@@ -268,7 +232,7 @@
&spi2 {
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
pinctrl-0 = <&spi2_pe_pins>;
status = "disabled";
};
@@ -282,14 +246,14 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_a>,
<&uart3_cts_rts_pins_a>;
pinctrl-0 = <&uart3_pg_pins>,
<&uart3_cts_rts_pg_pins>;
status = "okay";
};
@@ -303,11 +267,9 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&chip_id_det_pin>;
status = "okay";
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_id_det-gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_vcc5v0>;

57
arch/arm/dts/sun5i-reference-design-tablet.dtsi
View File

@@ -54,7 +54,8 @@
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
/* TODO: backlight uses axp gpio1 as enable pin */
enable-gpios = <&axp_gpio 1 GPIO_ACTIVE_HIGH>; /* AXP GPIO1 */
power-supply = <&reg_vcc3v0>;
};
chosen {
@@ -63,8 +64,6 @@
};
&codec {
pinctrl-names = "default";
pinctrl-0 = <&codec_pa_pin>;
allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
status = "okay";
};
@@ -92,11 +91,10 @@
*/
clock-frequency = <400000>;
touchscreen: touchscreen {
touchscreen: touchscreen@40 {
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
pinctrl-names = "default";
pinctrl-0 = <&ts_power_pin>;
power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
/* Tablet dts must provide reg and compatible */
status = "disabled";
@@ -124,7 +122,7 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
@@ -135,43 +133,6 @@
status = "okay";
};
&pio {
codec_pa_pin: codec_pa_pin@0 {
pins = "PG10";
function = "gpio_out";
};
mmc0_cd_pin: mmc0_cd_pin@0 {
pins = "PG0";
function = "gpio_in";
bias-pull-up;
};
ts_power_pin: ts_power_pin {
pins = "PB3";
function = "gpio_out";
drive-strength = <10>;
bias-disable;
};
usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
pins = "PG1";
function = "gpio_in";
bias-pull-down;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PG2";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_pin_a: usb0_vbus_pin@0 {
pins = "PG12";
function = "gpio_out";
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -210,7 +171,7 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
pinctrl-0 = <&uart1_pg_pins>;
status = "okay";
};
@@ -224,10 +185,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
usb0_id_det-gpios = <&pio 6 2 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG2 */
usb0_vbus_det-gpios = <&pio 6 1 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PG1 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_ldo3>;

219
arch/arm/dts/sun5i.dtsi
View File

@@ -42,14 +42,14 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include <dt-bindings/clock/sun5i-ccu.h>
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/reset/sun5i-ccu.h>
/ {
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
@@ -68,7 +68,7 @@
#size-cells = <1>;
ranges;
framebuffer@0 {
framebuffer-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@@ -77,7 +77,7 @@
status = "disabled";
};
framebuffer@1 {
framebuffer-lcd0-tve0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-tve0";
@@ -93,14 +93,14 @@
#size-cells = <1>;
ranges;
osc24M: clk@1c20050 {
osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "osc24M";
};
osc32k: clk@0 {
osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
@@ -108,14 +108,30 @@
};
};
soc@1c00000 {
compatible = "simple-bus";
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram-controller@1c00000 {
compatible = "allwinner,sun4i-a10-sram-controller";
/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
dma-ranges;
ranges;
system-control@1c00000 {
compatible = "allwinner,sun5i-a13-system-control";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
@@ -127,12 +143,13 @@
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00000000 0xc000>;
};
emac_sram: sram-section@8000 {
compatible = "allwinner,sun4i-a10-sram-a3-a4";
reg = <0x8000 0x4000>;
status = "disabled";
emac_sram: sram-section@8000 {
compatible = "allwinner,sun5i-a13-sram-a3-a4",
"allwinner,sun4i-a10-sram-a3-a4";
reg = <0x8000 0x4000>;
status = "disabled";
};
};
sram_d: sram@10000 {
@@ -143,11 +160,36 @@
ranges = <0 0x00010000 0x1000>;
otg_sram: sram-section@0 {
compatible = "allwinner,sun4i-a10-sram-d";
compatible = "allwinner,sun5i-a13-sram-d",
"allwinner,sun4i-a10-sram-d";
reg = <0x0000 0x1000>;
status = "disabled";
};
};
sram_c: sram@1d00000 {
compatible = "mmio-sram";
reg = <0x01d00000 0xd0000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x01d00000 0xd0000>;
ve_sram: sram-section@0 {
compatible = "allwinner,sun5i-a13-sram-c1",
"allwinner,sun4i-a10-sram-c1";
reg = <0x000000 0x80000>;
};
};
};
mbus: dram-controller@1c01000 {
compatible = "allwinner,sun5i-a13-mbus";
reg = <0x01c01000 0x1000>;
clocks = <&ccu CLK_MBUS>;
#address-cells = <1>;
#size-cells = <1>;
dma-ranges = <0x00000000 0x40000000 0x20000000>;
#interconnect-cells = <1>;
};
dma: dma-controller@1c02000 {
@@ -158,7 +200,7 @@
#dma-cells = <2>;
};
nfc: nand@1c03000 {
nfc: nand-controller@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <37>;
@@ -207,11 +249,8 @@
status = "disabled";
port {
#address-cells = <1>;
#size-cells = <0>;
tve0_in_tcon0: endpoint@0 {
reg = <0>;
tve0_in_tcon0: endpoint {
remote-endpoint = <&tcon0_out_tve0>;
};
};
@@ -238,6 +277,7 @@
compatible = "allwinner,sun5i-a13-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
resets = <&ccu RST_LCD>;
reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD>,
@@ -247,6 +287,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon-pixel-clock";
#clock-cells = <0>;
status = "disabled";
ports {
@@ -254,12 +295,9 @@
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_be0: endpoint@0 {
reg = <0>;
tcon0_in_be0: endpoint {
remote-endpoint = <&be0_out_tcon0>;
};
};
@@ -278,12 +316,25 @@
};
};
video-codec@1c0e000 {
compatible = "allwinner,sun5i-a13-video-engine";
reg = <0x01c0e000 0x1000>;
clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
<&ccu CLK_DRAM_VE>;
clock-names = "ahb", "mod", "ram";
resets = <&ccu RST_VE>;
interrupts = <53>;
allwinner,sram = <&ve_sram 1>;
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
clock-names = "ahb", "mmc";
interrupts = <32>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -321,13 +372,14 @@
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
dr_mode = "otg";
status = "disabled";
};
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun5i-a13-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4>;
reg = <0x01c13400 0x10>, <0x01c14800 0x4>;
reg-names = "phy_ctrl", "pmu1";
clocks = <&ccu CLK_USB_PHY0>;
clock-names = "usb_phy";
@@ -404,7 +456,7 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
emac_pins_a: emac0@0 {
emac_pd_pins: emac-pd-pins {
pins = "PD6", "PD7", "PD10",
"PD11", "PD12", "PD13", "PD14",
"PD15", "PD18", "PD19", "PD20",
@@ -413,27 +465,27 @@
function = "emac";
};
i2c0_pins_a: i2c0@0 {
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
i2c1_pins: i2c1-pins {
pins = "PB15", "PB16";
function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
i2c2_pins: i2c2-pins {
pins = "PB17", "PB18";
function = "i2c2";
};
ir0_rx_pins_a: ir0@0 {
ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
lcd_rgb565_pins: lcd_rgb565@0 {
lcd_rgb565_pins: lcd-rgb565-pins {
pins = "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD19", "PD20", "PD21", "PD22", "PD23",
@@ -441,7 +493,7 @@
function = "lcd0";
};
lcd_rgb666_pins: lcd_rgb666@0 {
lcd_rgb666_pins: lcd-rgb666-pins {
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
@@ -449,7 +501,7 @@
function = "lcd0";
};
mmc0_pins_a: mmc0@0 {
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2", "PF3",
"PF4", "PF5";
function = "mmc0";
@@ -457,7 +509,15 @@
bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
mmc2_4bit_pc_pins: mmc2-4bit-pc-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12", "PC13",
"PC14", "PC15";
@@ -466,15 +526,7 @@
bias-pull-up;
};
mmc2_4bit_pins_a: mmc2-4bit@0 {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11";
function = "mmc2";
drive-strength = <30>;
bias-pull-up;
};
nand_pins_a: nand-base0@0 {
nand_pins: nand-pins {
pins = "PC0", "PC1", "PC2",
"PC5", "PC8", "PC9", "PC10",
"PC11", "PC12", "PC13", "PC14",
@@ -482,72 +534,79 @@
function = "nand0";
};
nand_cs0_pins_a: nand-cs@0 {
nand_cs0_pin: nand-cs0-pin {
pins = "PC4";
function = "nand0";
};
nand_rb0_pins_a: nand-rb@0 {
nand_rb0_pin: nand-rb0-pin {
pins = "PC6";
function = "nand0";
};
spi2_pins_a: spi2@0 {
pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
spi2_pe_pins: spi2-pe-pins {
pins = "PE1", "PE2", "PE3";
function = "spi2";
};
spi2_cs0_pins_a: spi2-cs0@0 {
spi2_cs0_pe_pin: spi2-cs0-pe-pin {
pins = "PE0";
function = "spi2";
};
uart1_pins_a: uart1@0 {
uart1_pe_pins: uart1-pe-pins {
pins = "PE10", "PE11";
function = "uart1";
};
uart1_pins_b: uart1@1 {
uart1_pg_pins: uart1-pg-pins {
pins = "PG3", "PG4";
function = "uart1";
};
uart2_pins_a: uart2@0 {
uart2_pd_pins: uart2-pd-pins {
pins = "PD2", "PD3";
function = "uart2";
};
uart2_cts_rts_pins_a: uart2-cts-rts@0 {
uart2_cts_rts_pd_pins: uart2-cts-rts-pd-pins {
pins = "PD4", "PD5";
function = "uart2";
};
uart3_pins_a: uart3@0 {
uart3_pg_pins: uart3-pg-pins {
pins = "PG9", "PG10";
function = "uart3";
};
uart3_cts_rts_pins_a: uart3-cts-rts@0 {
uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
pins = "PG11", "PG12";
function = "uart3";
};
pwm0_pins: pwm0 {
pins = "PB2";
function = "pwm";
};
};
timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
interrupts = <22>,
<23>,
<24>,
<25>,
<67>,
<68>;
clocks = <&ccu CLK_HOSC>;
};
wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
interrupts = <24>;
clocks = <&osc24M>;
};
ir0: ir@1c21800 {
@@ -636,6 +695,8 @@
reg = <0x01c2ac00 0x400>;
interrupts = <7>;
clocks = <&ccu CLK_APB1_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -646,6 +707,8 @@
reg = <0x01c2b000 0x400>;
interrupts = <8>;
clocks = <&ccu CLK_APB1_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -656,11 +719,25 @@
reg = <0x01c2b400 0x400>;
interrupts = <9>;
clocks = <&ccu CLK_APB1_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
mali: gpu@1c40000 {
compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
reg = <0x01c40000 0x10000>;
interrupts = <69>, <70>, <71>, <72>, <73>;
interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pmu";
clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
clock-names = "bus", "core";
resets = <&ccu RST_GPU>;
assigned-clocks = <&ccu CLK_GPU>;
assigned-clock-rates = <320000000>;
};
timer@1c60000 {
compatible = "allwinner,sun5i-a13-hstimer";
reg = <0x01c60000 0x1000>;
@@ -677,6 +754,8 @@
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_FE>;
interconnects = <&mbus 19>;
interconnect-names = "dma-mem";
status = "disabled";
ports {
@@ -684,12 +763,9 @@
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint@0 {
reg = <0>;
fe0_out_be0: endpoint {
remote-endpoint = <&be0_in_fe0>;
};
};
@@ -705,33 +781,26 @@
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_BE>;
interconnects = <&mbus 18>;
interconnect-names = "dma-mem";
status = "disabled";
assigned-clocks = <&ccu CLK_DE_BE>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be0_in_fe0: endpoint@0 {
reg = <0>;
be0_in_fe0: endpoint {
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_tcon0: endpoint@0 {
reg = <0>;
be0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_be0>;
};
};

10
arch/arm/dts/sun6i-a31-app4-evb1.dts
View File

@@ -65,22 +65,14 @@
status = "okay";
};
&pio {
usb1_vbus_pin_a: usb1_vbus_pin@0 {
pins = "PH27";
function = "gpio_out";
};
};
&reg_usb1_vbus {
pinctrl-0 = <&usb1_vbus_pin_a>;
gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

57
arch/arm/dts/sun6i-a31-colombus.dts
View File

@@ -60,13 +60,11 @@
stdout-path = "serial0:115200n8";
};
i2c_lcd: i2c@0 {
i2c_lcd: i2c {
/* The lcd panel i2c interface is hooked up via gpios */
compatible = "i2c-gpio";
pinctrl-names = "default";
pinctrl-0 = <&i2c_lcd_pins>;
gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */
<&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */
sda-gpios = <&pio 0 23 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA23 */
scl-gpios = <&pio 0 24 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA24 */
i2c-gpio,delay-us = <5>;
};
};
@@ -77,31 +75,21 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
phy = <&phy1>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "fail";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
mma8452: mma8452@1d {
@@ -112,48 +100,27 @@
};
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&mmc0_pins_a {
bias-pull-up;
};
&pio {
mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
pins = "PA8";
function = "gpio_in";
bias-pull-up;
};
usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
pins = "PH24";
function = "gpio_out";
};
i2c_lcd_pins: i2c_lcd_pin@0 {
pins = "PA23", "PA24";
function = "gpio_out";
bias-pull-up;
};
};
&reg_usb2_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb2_vbus_pin_colombus>;
gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

75
arch/arm/dts/sun6i-a31-hummingbird.dts
View File

@@ -86,31 +86,23 @@
vga-dac {
compatible = "dumb-vga-dac";
vdd-supply = <&reg_vga_3v3>;
#address-cells = <1>;
#size-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
vga_dac_in: endpoint@0 {
reg = <0>;
vga_dac_in: endpoint {
remote-endpoint = <&tcon0_out_vga>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
vga_dac_out: endpoint@0 {
reg = <0>;
vga_dac_out: endpoint {
remote-endpoint = <&vga_con_in>;
};
};
@@ -160,17 +152,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>;
phy = <&phy1>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -184,21 +169,15 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
/* pull-ups and devices require AXP221 DLDO3 */
status = "failed";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
pcf8563: rtc@51 {
@@ -209,27 +188,27 @@
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&mmc0_pins_a {
/* external pull-ups missing for some pins */
bias-pull-up;
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
vmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -241,31 +220,13 @@
status = "okay";
};
&pio {
gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 {
pins = "PA21";
function = "gpio_out";
};
mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 {
pins = "PA8";
function = "gpio_in";
bias-pull-up;
};
wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
pins = "PG10";
function = "gpio_out";
};
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en;
};
@@ -354,7 +315,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
@@ -368,8 +329,8 @@
};
&usbphy {
usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
usb0_vbus_det-gpio = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;

47
arch/arm/dts/sun6i-a31-i7.dts
View File

@@ -71,10 +71,8 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_i7>;
blue {
led {
label = "i7:blue:usr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
};
@@ -118,14 +116,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
pinctrl-0 = <&gmac_mii_pins>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -140,48 +134,31 @@
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
status = "okay";
};
&pio {
led_pins_i7: led_pins@0 {
pins = "PH13";
function = "gpio_out";
};
mmc0_cd_pin_i7: mmc0_cd_pin@0 {
pins = "PH22";
function = "gpio_in";
bias-pull-up;
};
usb1_vbus_pin_i7: usb1_vbus_pin@0 {
pins = "PC27";
function = "gpio_out";
};
};
&reg_usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_i7>;
gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_pins_a>;
spdif-out = "okay";
pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};
@@ -191,7 +168,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

48
arch/arm/dts/sun6i-a31-m9.dts
View File

@@ -60,10 +60,8 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_m9>;
blue {
led {
label = "m9:blue:pwr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -85,26 +83,26 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
pinctrl-0 = <&gmac_mii_pins>;
phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_dldo1>;
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
@@ -117,31 +115,13 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&pio {
led_pins_m9: led_pins@0 {
pins = "PH13";
function = "gpio_out";
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
pins = "PH22";
function = "gpio_in";
bias-pull-up;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
pins = "PC27";
function = "gpio_out";
};
};
&reg_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -215,15 +195,13 @@
};
&reg_usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_m9>;
gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

48
arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts
View File

@@ -60,10 +60,8 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_m9>;
blue {
led {
label = "a1000g:blue:pwr";
gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -85,26 +83,26 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
pinctrl-0 = <&gmac_mii_pins>;
phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_dldo1>;
status = "okay";
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
status = "okay";
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
@@ -117,31 +115,13 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
#include "axp22x.dtsi"
&pio {
led_pins_m9: led_pins@0 {
pins = "PH13";
function = "gpio_out";
};
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
pins = "PH22";
function = "gpio_in";
bias-pull-up;
};
usb1_vbus_pin_m9: usb1_vbus_pin@0 {
pins = "PC27";
function = "gpio_out";
};
};
&reg_aldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -215,15 +195,13 @@
};
&reg_usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_m9>;
gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

6
arch/arm/dts/sun6i-a31-mixtile-loftq.dts
View File

@@ -31,11 +31,13 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-mode = "rgmii";
status = "okay";
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
@@ -51,6 +53,6 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

218
arch/arm/dts/sun6i-a31.dtsi
View File

@@ -42,8 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -52,6 +50,8 @@
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &gmac;
@@ -62,7 +62,7 @@
#size-cells = <1>;
ranges;
simplefb_hdmi: framebuffer@0 {
simplefb_hdmi: framebuffer-lcd0-hdmi {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
@@ -73,7 +73,7 @@
status = "disabled";
};
simplefb_lcd: framebuffer@1 {
simplefb_lcd: framebuffer-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@@ -105,37 +105,63 @@
reg = <0>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
operating-points =
/* kHz uV */
1008000 1200000
864000 1200000
720000 1100000
480000 1000000
>;
<1008000 1200000>,
<864000 1200000>,
<720000 1100000>,
<480000 1000000>;
#cooling-cells = <2>;
};
cpu@1 {
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points =
/* kHz uV */
<1008000 1200000>,
<864000 1200000>,
<720000 1100000>,
<480000 1000000>;
#cooling-cells = <2>;
};
cpu@2 {
cpu2: cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points =
/* kHz uV */
<1008000 1200000>,
<864000 1200000>,
<720000 1100000>,
<480000 1000000>;
#cooling-cells = <2>;
};
cpu@3 {
cpu3: cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points =
/* kHz uV */
<1008000 1200000>,
<864000 1200000>,
<720000 1100000>,
<480000 1000000>;
#cooling-cells = <2>;
};
};
thermal-zones {
cpu_thermal {
cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -144,7 +170,10 @@
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
@@ -166,12 +195,8 @@
};
};
memory {
reg = <0x40000000 0x80000000>;
};
pmu {
compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
compatible = "arm,cortex-a7-pmu";
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
@@ -183,17 +208,20 @@
#size-cells = <1>;
ranges;
osc24M: osc24M {
osc24M: clk-24M {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-accuracy = <50000>;
clock-output-names = "osc24M";
};
osc32k: clk@0 {
osc32k: clk-32k {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
clock-output-names = "osc32k";
clock-accuracy = <50000>;
clock-output-names = "ext_osc32k";
};
/*
@@ -205,14 +233,14 @@
* The actual TX clock rate is not controlled by the
* gmac_tx clock.
*/
mii_phy_tx_clk: clk@1 {
mii_phy_tx_clk: clk-mii-phy-tx {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <25000000>;
clock-output-names = "mii_phy_tx";
};
gmac_int_tx_clk: clk@2 {
gmac_int_tx_clk: clk-gmac-int-tx {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -234,7 +262,7 @@
status = "disabled";
};
soc@1c00000 {
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
@@ -253,15 +281,21 @@
compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_AHB1_LCD0>;
reset-names = "lcd";
dmas = <&dma 11>;
resets = <&ccu RST_AHB1_LCD0>,
<&ccu RST_AHB1_LVDS>;
reset-names = "lcd",
"lvds";
clocks = <&ccu CLK_AHB1_LCD0>,
<&ccu CLK_LCD0_CH0>,
<&ccu CLK_LCD0_CH1>;
<&ccu CLK_LCD0_CH1>,
<&ccu 15>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
"tcon-ch1",
"lvds-alt";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
ports {
#address-cells = <1>;
@@ -301,15 +335,20 @@
compatible = "allwinner,sun6i-a31-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_AHB1_LCD1>;
reset-names = "lcd";
dmas = <&dma 12>;
resets = <&ccu RST_AHB1_LCD1>,
<&ccu RST_AHB1_LVDS>;
reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB1_LCD1>,
<&ccu CLK_LCD1_CH0>,
<&ccu CLK_LCD1_CH1>;
<&ccu CLK_LCD1_CH1>,
<&ccu 15>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
"tcon-ch1",
"lvds-alt";
clock-output-names = "tcon1-pixel-clock";
#clock-cells = <0>;
ports {
#address-cells = <1>;
@@ -359,6 +398,8 @@
resets = <&ccu RST_AHB1_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -378,6 +419,8 @@
resets = <&ccu RST_AHB1_MMC1>;
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -431,7 +474,6 @@
<&ccu CLK_PLL_VIDEO1_2X>;
clock-names = "ahb", "mod", "ddc", "pll-0", "pll-1";
resets = <&ccu RST_AHB1_HDMI>;
reset-names = "ahb";
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
dmas = <&dma 13>, <&dma 13>, <&dma 14>;
status = "disabled";
@@ -457,8 +499,6 @@
};
hdmi_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
@@ -474,6 +514,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
dr_mode = "otg";
status = "disabled";
};
@@ -557,7 +598,7 @@
ccu: clock@1c20000 {
compatible = "allwinner,sun6i-a31-ccu";
reg = <0x01c20000 0x400>;
clocks = <&osc24M>, <&osc32k>;
clocks = <&osc24M>, <&rtc 0>;
clock-names = "hosc", "losc";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -570,14 +611,14 @@
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>;
clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#gpio-cells = <3>;
gmac_pins_gmii_a: gmac_gmii@0 {
gmac_gmii_pins: gmac-gmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA4", "PA5", "PA6", "PA7",
"PA8", "PA9", "PA10", "PA11",
@@ -593,7 +634,7 @@
drive-strength = <30>;
};
gmac_pins_mii_a: gmac_mii@0 {
gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
"PA12", "PA13", "PA14", "PA19",
@@ -602,7 +643,7 @@
function = "gmac";
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2", "PA3",
"PA9", "PA10", "PA11",
"PA12", "PA13", "PA14", "PA19",
@@ -615,22 +656,22 @@
drive-strength = <40>;
};
i2c0_pins_a: i2c0@0 {
i2c0_pins: i2c0-pins {
pins = "PH14", "PH15";
function = "i2c0";
};
i2c1_pins_a: i2c1@0 {
i2c1_pins: i2c1-pins {
pins = "PH16", "PH17";
function = "i2c1";
};
i2c2_pins_a: i2c2@0 {
i2c2_pins: i2c2-pins {
pins = "PH18", "PH19";
function = "i2c2";
};
lcd0_rgb888_pins: lcd0_rgb888 {
lcd0_rgb888_pins: lcd0-rgb888-pins {
pins = "PD0", "PD1", "PD2", "PD3",
"PD4", "PD5", "PD6", "PD7",
"PD8", "PD9", "PD10", "PD11",
@@ -641,7 +682,7 @@
function = "lcd0";
};
mmc0_pins_a: mmc0@0 {
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
@@ -649,7 +690,7 @@
bias-pull-up;
};
mmc1_pins_a: mmc1@0 {
mmc1_pins: mmc1-pins {
pins = "PG0", "PG1", "PG2", "PG3",
"PG4", "PG5";
function = "mmc1";
@@ -657,7 +698,7 @@
bias-pull-up;
};
mmc2_pins_a: mmc2@0 {
mmc2_4bit_pins: mmc2-4bit-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11";
function = "mmc2";
@@ -665,7 +706,7 @@
bias-pull-up;
};
mmc2_8bit_emmc_pins: mmc2@1 {
mmc2_8bit_emmc_pins: mmc2-8bit-emmc-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
@@ -675,7 +716,7 @@
bias-pull-up;
};
mmc3_8bit_emmc_pins: mmc3@1 {
mmc3_8bit_emmc_pins: mmc3-8bit-emmc-pins {
pins = "PC6", "PC7", "PC8", "PC9",
"PC10", "PC11", "PC12",
"PC13", "PC14", "PC15",
@@ -685,12 +726,12 @@
bias-pull-up;
};
spdif_pins_a: spdif@0 {
spdif_tx_pin: spdif-tx-pin {
pins = "PH28";
function = "spdif";
};
uart0_pins_a: uart0@0 {
uart0_ph_pins: uart0-ph-pins {
pins = "PH20", "PH21";
function = "uart0";
};
@@ -703,13 +744,16 @@
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt1: watchdog@1c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
spdif: spdif@1c21000 {
@@ -849,6 +893,8 @@
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB2_I2C0>;
resets = <&ccu RST_APB2_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -860,6 +906,8 @@
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB2_I2C1>;
resets = <&ccu RST_APB2_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -871,6 +919,8 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_APB2_I2C2>;
resets = <&ccu RST_APB2_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -900,8 +950,12 @@
snps,fixed-burst;
snps,force_sf_dma_mode;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
crypto: crypto-engine@1c15000 {
@@ -950,6 +1004,8 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@1c69000 {
@@ -962,6 +1018,8 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI1>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi2: spi@1c6a000 {
@@ -974,6 +1032,8 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI2>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
spi3: spi@1c6b000 {
@@ -986,10 +1046,12 @@
dma-names = "rx", "tx";
resets = <&ccu RST_AHB1_SPI3>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
@@ -1073,9 +1135,6 @@
"ram";
resets = <&ccu RST_AHB1_BE1>;
assigned-clocks = <&ccu CLK_BE1>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1119,9 +1178,6 @@
"ram";
resets = <&ccu RST_AHB1_DRC1>;
assigned-clocks = <&ccu CLK_IEP_DRC1>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1165,9 +1221,6 @@
"ram";
resets = <&ccu RST_AHB1_BE0>;
assigned-clocks = <&ccu CLK_BE0>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
@@ -1189,12 +1242,9 @@
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_drc0: endpoint@0 {
reg = <0>;
be0_out_drc0: endpoint {
remote-endpoint = <&drc0_in_be0>;
};
};
@@ -1211,20 +1261,14 @@
"ram";
resets = <&ccu RST_AHB1_DRC0>;
assigned-clocks = <&ccu CLK_IEP_DRC0>;
assigned-clock-rates = <300000000>;
ports {
#address-cells = <1>;
#size-cells = <0>;
drc0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
drc0_in_be0: endpoint@0 {
reg = <0>;
drc0_in_be0: endpoint {
remote-endpoint = <&be0_out_drc0>;
};
};
@@ -1248,13 +1292,16 @@
};
rtc: rtc@1f00000 {
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc32k>;
clock-output-names = "osc32k";
};
nmi_intc: interrupt-controller@1f00c00 {
r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
@@ -1269,7 +1316,7 @@
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
clocks = <&osc32k>, <&osc24M>,
clocks = <&rtc 0>, <&osc24M>,
<&ccu CLK_PLL_PERIPH>,
<&ccu CLK_PLL_PERIPH>;
clock-output-names = "ar100";
@@ -1304,7 +1351,7 @@
ir_clk: ir_clk {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
clocks = <&osc32k>, <&osc24M>;
clocks = <&rtc 0>, <&osc24M>;
clock-output-names = "ir";
};
@@ -1320,7 +1367,7 @@
};
ir: ir@1f02000 {
compatible = "allwinner,sun5i-a13-ir";
compatible = "allwinner,sun6i-a31-ir";
clocks = <&apb0_gates 1>, <&ir_clk>;
clock-names = "apb", "ir";
resets = <&apb0_rst 1>;
@@ -1334,21 +1381,20 @@
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
clock-names = "apb", "hosc", "losc";
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#size-cells = <0>;
#gpio-cells = <3>;
ir_pins_a: ir@0 {
s_ir_rx_pin: s-ir-rx-pin {
pins = "PL4";
function = "s_ir";
};
p2wi_pins: p2wi {
s_p2wi_pins: s-p2wi-pins {
pins = "PL0", "PL1";
function = "s_p2wi";
};
@@ -1362,7 +1408,7 @@
clock-frequency = <100000>;
resets = <&apb0_rst 3>;
pinctrl-names = "default";
pinctrl-0 = <&p2wi_pins>;
pinctrl-0 = <&s_p2wi_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;

2
arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts
View File

@@ -53,7 +53,7 @@
vref-supply = <&reg_aldo3>;
status = "okay";
button@1000 {
button-1000 {
label = "Home";
linux,code = <KEY_HOMEPAGE>;
channel = <0>;

17
arch/arm/dts/sun6i-a31s-cs908.dts
View File

@@ -66,28 +66,31 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
pinctrl-0 = <&gmac_mii_pins>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ohci1 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

8
arch/arm/dts/sun6i-a31s-inet-q972.dts
View File

@@ -54,8 +54,6 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
ft5406ee8: touchscreen@38 {
@@ -73,21 +71,21 @@
vref-supply = <&reg_aldo3>;
status = "okay";
button@200 {
button-200 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <200000>;
};
button@900 {
button-900 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <900000>;
};
button@1200 {
button-1200 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;

32
arch/arm/dts/sun6i-a31s-primo81.dts
View File

@@ -90,19 +90,13 @@
&i2c0 {
/* pull-ups and device VDDIO use AXP221 DLDO3 */
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "failed";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
ctp@5d {
pinctrl-names = "default";
pinctrl-0 = <&gt911_int_primo81>;
compatible = "goodix,gt911";
reg = <0x5d>;
interrupt-parent = <&pio>;
@@ -112,8 +106,6 @@
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
accelerometer@1c {
@@ -123,7 +115,6 @@
reg = <0x1c>;
interrupt-parent = <&pio>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */
#io-channel-cells = <1>;
};
};
@@ -131,14 +122,14 @@
vref-supply = <&reg_aldo3>;
status = "okay";
button@158 {
button-158 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <158730>;
};
button@349 {
button-349 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -147,8 +138,6 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
@@ -156,22 +145,11 @@
};
&pio {
gt911_int_primo81: gt911_int_pin@0 {
pins = "PA3";
function = "gpio_in";
};
mma8452_int_primo81: mma8452_int_pin@0 {
mma8452_int_primo81: mma8452-int-pin {
pins = "PA9";
function = "gpio_in";
bias-pull-up;
};
mmc0_cd_pin_primo81: mmc0_cd_pin@0 {
pins = "PA8";
function = "gpio_in";
bias-pull-up;
};
};
&p2wi {
@@ -180,7 +158,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
x-powers,drive-vbus-en;
};
@@ -281,7 +259,7 @@
};
&usbphy {
usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_dldo1>;

4
arch/arm/dts/sun6i-a31s-sina31s-core.dtsi
View File

@@ -78,7 +78,7 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -135,7 +135,7 @@
/* UART0 pads available on core board */
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

39
arch/arm/dts/sun6i-a31s-sina31s.dts
View File

@@ -66,8 +66,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_sina31s>;
status {
label = "sina31s:status:usr";
@@ -116,15 +114,11 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_mii_a>;
phy = <&phy1>;
pinctrl-0 = <&gmac_mii_pins>;
phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_dldo1>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -139,7 +133,7 @@
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
@@ -147,14 +141,14 @@
vref-supply = <&reg_aldo3>;
status = "okay";
button@158 {
button-158 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <158730>;
};
button@349 {
button-349 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
@@ -162,9 +156,13 @@
};
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
@@ -175,19 +173,6 @@
status = "okay";
};
&pio {
led_pin_sina31s: led_pin@0 {
pins = "PH13";
function = "gpio_out";
};
mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
pins = "PA4";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dldo1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -196,7 +181,7 @@
&spdif {
pinctrl-names = "default";
pinctrl-0 = <&spdif_pins_a>;
pinctrl-0 = <&spdif_tx_pin>;
status = "okay";
};

144
arch/arm/dts/sun6i-a31s-sinovoip-bpi-m2.dts
View File

@@ -58,20 +58,18 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_bpi_m2>;
blue {
led-0 {
label = "bpi-m2:blue:usr";
gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
};
green {
led-1 {
label = "bpi-m2:green:usr";
gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */
};
red {
led-2 {
label = "bpi-m2:red:usr";
gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */
};
@@ -79,8 +77,6 @@
mmc2_pwrseq: mmc2_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>;
reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */
};
};
@@ -95,42 +91,38 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>;
phy = <&phy1>;
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_dldo1>;
snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */
snps,reset-active-low;
snps,reset-delays-us = <0 10000 30000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ir {
pinctrl-names = "default";
pinctrl-0 = <&ir_pins_a>;
pinctrl-0 = <&s_ir_rx_pin>;
status = "okay";
};
&mdio {
phy1: ethernet-phy@1 {
reg = <1>;
reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; /* PA21 */
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
status = "okay";
};
&mmc0_pins_a {
bias-pull-up;
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_a>;
pinctrl-0 = <&mmc2_4bit_pins>;
vmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&mmc2_pwrseq>;
bus-width = <4>;
@@ -146,10 +138,6 @@
};
};
&mmc2_pins_a {
bias-pull-up;
};
&ohci0 {
status = "okay";
};
@@ -160,38 +148,13 @@
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
eldoin-supply = <&reg_dcdc1>;
x-powers,drive-vbus-en;
};
};
&pio {
gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 {
pins = "PA21";
function = "gpio_out";
};
led_pins_bpi_m2: led_pins@0 {
pins = "PG5", "PG10", "PG11";
function = "gpio_out";
};
mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 {
pins = "PA4";
function = "gpio_in";
bias-pull-up;
};
};
&r_pio {
mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 {
pins = "PL8";
function = "gpio_out";
};
};
#include "axp22x.dtsi"
&reg_aldo1 {
@@ -291,10 +254,81 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};
&usbphy {
status = "okay";
};
&pio {
gpio-line-names =
/* PA */
"ETXD0", "ETXD1", "ETXD2", "ETXD3", "SDC0-DET", "", "",
"", "ETXCLK", "ETXEN", "EGTXCLK", "ERXD0", "ERXD1",
"ERXD2", "ERXD3", "", "", "", "", "ERXDV", "ERXCK",
"ETXERR", "ERXERR", "ECOL", "ECRS", "ECLKIN", "EMDC",
"EMDIO", "", "", "", "",
/* PB */
"CN7-P29", "CN7-P31", "CN7-P33", "CN7-P35", "CN7-P37",
"CN7-P28", "CN7-P27", "CN7-P32", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "",
/* PC */
"", "", "", "", "", "", "WL-SDIO-CMD", "WL-SDIO-CLK",
"WL-SDIO-D0", "WL-SDIO-D2", "WL-SDIO-D2", "WL-SDIO-D3",
"", "", "", "", "", "", "", "", "", "", "", "", "", "",
"", "USB-DRV", "", "", "", "",
/* PD */
"CN9-P09", "CN9-P11", "CN9-P13", "CN9-P15", "CN9-P17",
"CN9-P19", "CN9-P21", "CN9-P23", "CN9-P25", "CN9-P27",
"CN9-P29", "CN9-P31", "CN9-P33", "CN9-P35", "CN9-P37",
"CN9-P39", "CN9-P40", "CN9-P38", "CN9-P36", "CN9-P34",
"CN9-P32", "CN9-P30", "CN9-P28", "CN9-P26", "CN9-P22",
"CN9-P14", "CN9-P18", "CN9-P16", "", "", "", "",
/* PE */
"CN6-P20", "CN6-P24", "CN6-P30", "CN6-P28", "CN7-P08",
"CN7-P10", "CN7-P36", "CN7-P38", "CN6-P17", "CN6-P19",
"CN6-P21", "CN6-P23", "CN6-P25", "CN6-P27", "CN6-P29",
"CN6-P31", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "",
/* PF */
"SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
"SDC0-D2", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "", "", "", "",
"",
/* PG */
"CN9-P06", "CN9-P08", "CN9-P20", "CN9-P12", "CN9-P07",
"LED-PWR", "CN7-P13", "CN7-P11", "CN7-P22", "CN7-P15",
"LED-G", "LED-B", "CN7-P26", "CN7-P24", "CN7-P23",
"CN7-P19", "CN7-P21", "HCEC", "CN6-P22", "", "", "", "",
"", "", "", "", "", "", "", "", "",
/* PH */
"", "", "", "", "", "", "", "", "", "CN7-P07",
"CN7-P12", "CN7-P16", "CN7-P18", "CN9-P10", "CN6-P16",
"CN6-P14", "CN9-P04", "CN9-P02", "CN7-P05", "CN7-P03",
"CN8-P03", "CN8-P02", "", "", "CN6-P34", "CN6-P32",
"CN6-P26", "CN6-P18", "", "", "", "";
};
&r_pio {
gpio-line-names =
/* PL */
"PMU-SCK", "PMU-SDA", "VBAT-EN", "", "IR-RX",
"WL-WAKE-HOST", "BT-WAKE_HOST", "BT-ENABLE",
"WL-PMU-EN", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "", "",
/* PM */
"CN6-P12", "CN6-P35", "CN7-P40", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "", "";
};

22
arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
View File

@@ -62,14 +62,10 @@
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
@@ -89,34 +85,20 @@
status = "okay";
};
&pio {
mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 {
pins = "PA8";
function = "gpio_in";
bias-pull-up;
};
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&mmc0_pins_a {
bias-pull-up;
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
@@ -189,7 +171,7 @@
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
pinctrl-0 = <&uart0_ph_pins>;
status = "okay";
};

22
arch/arm/dts/sun6i-reference-design-tablet.dtsi
View File

@@ -66,34 +66,20 @@
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <&reg_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */
status = "okay";
};
&pio {
mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
pins = "PA8";
function = "gpio_in";
bias-pull-up;
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PA15";
function = "gpio_in";
bias-pull-up;
};
};
&p2wi {
status = "okay";
axp22x: pmic@68 {
compatible = "x-powers,axp221";
reg = <0x68>;
interrupt-parent = <&nmi_intc>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
drivevbus-supply = <&reg_vcc5v0>;
x-powers,drive-vbus-en;
@@ -179,9 +165,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
usb0_id_det-gpios = <&pio 0 15 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PA15 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_dldo1>;

16
arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts
View File

@@ -74,12 +74,12 @@
leds {
compatible = "gpio-leds";
green {
led-0 {
label = "bananapi-m1-plus:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
pwr {
led-1 {
label = "bananapi-m1-plus:pwr:usr";
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -129,14 +129,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -171,6 +167,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;

41
arch/arm/dts/sun7i-a20-bananapi.dts
View File

@@ -77,7 +77,7 @@
leds {
compatible = "gpio-leds";
green {
led {
label = "bananapi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
@@ -104,16 +104,15 @@
&cpu0 {
cpu-supply = <&reg_dcdc2>;
operating-points = <
operating-points =
/* kHz uV */
960000 1400000
912000 1400000
864000 1350000
720000 1250000
528000 1150000
312000 1100000
144000 1050000
>;
<960000 1400000>,
<912000 1400000>,
<864000 1350000>,
<720000 1250000>,
<528000 1150000>,
<312000 1100000>,
<144000 1050000>;
};
&de {
@@ -131,14 +130,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -171,6 +166,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -246,12 +247,6 @@
"SPI-MISO", "SPI-CE1", "",
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
"", "", "", "", "", "", "", "";
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
#include "axp209.dtsi"
@@ -329,9 +324,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;

16
arch/arm/dts/sun7i-a20-bananapro.dts
View File

@@ -63,12 +63,12 @@
leds {
compatible = "gpio-leds";
blue {
led-0 {
label = "bananapro:blue:usr";
gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
};
green {
led-1 {
label = "bananapro:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
@@ -109,14 +109,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -143,6 +139,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;

28
arch/arm/dts/sun7i-a20-cubieboard2.dts
View File

@@ -75,12 +75,12 @@
leds {
compatible = "gpio-leds";
blue {
led-0 {
label = "cubieboard2:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
green {
led-1 {
label = "cubieboard2:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
@@ -115,13 +115,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -161,6 +157,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&ohci0 {
status = "okay";
};
@@ -173,14 +175,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
&reg_ahci_5v {
status = "okay";
};
@@ -236,9 +230,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

20
arch/arm/dts/sun7i-a20-cubietruck.dts
View File

@@ -75,22 +75,22 @@
leds {
compatible = "gpio-leds";
blue {
led-0 {
label = "cubietruck:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
};
orange {
led-1 {
label = "cubietruck:orange:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
white {
led-2 {
label = "cubietruck:white:usr";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;
};
green {
led-3 {
label = "cubietruck:green:usr";
gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>;
};
@@ -150,13 +150,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -194,6 +190,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;

182
arch/arm/dts/sun7i-a20-haoyu-marsboard.dts Normal file
View File

@@ -0,0 +1,182 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2021 Conley Lee
* Conley Lee <conleylee@foxmail.com>
*/
/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "HAOYU Electronics Marsboard A20";
compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
};
&ahci {
target-supply = <&reg_ahci_5v>;
status = "okay";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
phy-handle = <&phy0>;
phy-mode = "mii";
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
&gmac_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
gmac_txerr: gmac-txerr-pin {
pins = "PA17";
function = "gmac";
};
};
&reg_ahci_5v {
status = "okay";
};
#include "axp209.dtsi"
&ac_power_supply {
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1450000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};

21
arch/arm/dts/sun7i-a20-hummingbird.dts
View File

@@ -100,19 +100,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_vdd>;
/* phy reset config */
snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
snps,reset-active-low;
/* wait 1s after reset, otherwise fail to read phy id */
snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -146,6 +137,16 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
reset-assert-us = <10000>;
/* wait 1s after reset, otherwise fail to read phy id */
reset-deassert-us = <1000000>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;

16
arch/arm/dts/sun7i-a20-i12-tvbox.dts
View File

@@ -62,12 +62,12 @@
leds {
compatible = "gpio-leds";
red {
led-0 {
label = "i12_tvbox:red:usr";
gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
};
blue {
led-1 {
label = "i12_tvbox:blue:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
@@ -115,14 +115,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -145,6 +141,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;

15
arch/arm/dts/sun7i-a20-icnova-swac.dts
View File

@@ -49,7 +49,8 @@
/ {
model = "ICnova-A20 SWAC";
compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20",
"allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
@@ -75,13 +76,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -98,6 +95,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;

8
arch/arm/dts/sun7i-a20-itead-ibox.dts
View File

@@ -53,13 +53,13 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_itead_core>;
green {
led-0 {
label = "itead_core:green:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
blue {
led-1 {
label = "itead_core:blue:usr";
gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -97,10 +97,12 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};

16
arch/arm/dts/sun7i-a20-lamobo-r1.dts
View File

@@ -75,7 +75,7 @@
leds {
compatible = "gpio-leds";
green {
led {
label = "lamobo_r1:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
@@ -123,8 +123,6 @@
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
/delete-property/#address-cells;
/delete-property/#size-cells;
fixed-link {
speed = <1000>;
@@ -229,14 +227,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
#include "axp209.dtsi"
&ac_power_supply {
@@ -322,9 +312,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;

47
arch/arm/dts/sun7i-a20-linutronix-testbox-v2.dts Normal file
View File

@@ -0,0 +1,47 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2020 Linutronix GmbH
* Author: Benedikt Spranger <b.spranger@linutronix.de>
*/
/dts-v1/;
#include "sun7i-a20-lamobo-r1.dts"
/ {
model = "Lamobo R1";
compatible = "linutronix,testbox-v2", "lamobo,lamobo-r1", "allwinner,sun7i-a20";
leds {
led-opto1 {
label = "lamobo_r1:opto:powerswitch";
gpios = <&pio 7 3 GPIO_ACTIVE_HIGH>;
};
led-opto2 {
label = "lamobo_r1:opto:relay";
gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>;
};
};
};
&i2c2 {
clock-frequency = <100000>;
status = "okay";
eeprom: eeprom@50 {
compatible = "atmel,24c08";
reg = <0x50>;
status = "okay";
};
atecc508a@60 {
compatible = "atmel,atecc508a";
reg = <0x60>;
};
};
&can0 {
pinctrl-names = "default";
pinctrl-0 = <&can_ph_pins>;
status = "okay";
};

14
arch/arm/dts/sun7i-a20-m3.dts
View File

@@ -64,7 +64,7 @@
leds {
compatible = "gpio-leds";
blue {
led {
label = "m3:blue:usr";
gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
};
@@ -82,13 +82,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -111,6 +107,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;

2
arch/arm/dts/sun7i-a20-m5.dts
View File

@@ -39,7 +39,9 @@
phy = <&phy1>;
phy-mode = "mii";
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};

14
arch/arm/dts/sun7i-a20-olimex-som-evb.dts
View File

@@ -75,7 +75,7 @@
leds {
compatible = "gpio-leds";
green {
led {
label = "a20-olimex-som-evb:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -111,13 +111,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -202,6 +198,12 @@
};
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;

30
arch/arm/dts/sun7i-a20-olimex-som204-evb.dts
View File

@@ -46,19 +46,19 @@
leds {
compatible = "gpio-leds";
stat {
led-0 {
label = "a20-som204-evb:green:stat";
gpios = <&pio 8 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led1 {
led-1 {
label = "a20-som204-evb:green:led1";
gpios = <&pio 8 10 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
led2 {
led-2 {
label = "a20-som204-evb:yellow:led2";
gpios = <&pio 8 11 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -105,18 +105,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy3>;
phy-handle = <&phy3>;
phy-mode = "rgmii";
phy-supply = <&reg_vcc3v3>;
snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 1000000>;
status = "okay";
phy3: ethernet-phy@3 {
reg = <3>;
};
};
&hdmi {
@@ -161,6 +153,16 @@
status = "okay";
};
&gmac_mdio {
phy3: ethernet-phy@3 {
reg = <3>;
reset-gpios = <&pio 0 17 GPIO_ACTIVE_LOW>; /* PA17 */
reset-assert-us = <10000>;
/* wait 1s after reset, otherwise fail to read phy id */
reset-deassert-us = <1000000>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -314,8 +316,8 @@
};
&usbphy {
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;

32
arch/arm/dts/sun7i-a20-olinuxino-lime-emmc.dts Normal file
View File

@@ -0,0 +1,32 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2020 Olimex Ltd.
* Author: Stefan Mavrodiev <stefan@olimex.com>
*/
#include "sun7i-a20-olinuxino-lime.dts"
/ {
model = "Olimex A20-OLinuXino-LIME-eMMC";
compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
mmc2_pwrseq: pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
};
};
&mmc2 {
vmmc-supply = <&reg_vcc3v3>;
vqmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
non-removable;
mmc-pwrseq = <&mmc2_pwrseq>;
status = "okay";
emmc: emmc@0 {
reg = <0>;
compatible = "mmc-card";
broken-hpi;
};
};

32
arch/arm/dts/sun7i-a20-olinuxino-lime.dts
View File

@@ -78,7 +78,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinolime>;
green {
led {
label = "a20-olinuxino-lime:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -106,13 +106,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -149,6 +145,12 @@
};
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -174,18 +176,6 @@
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
&reg_ahci_5v {
@@ -217,10 +207,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;

46
arch/arm/dts/sun7i-a20-olinuxino-lime2.dts
View File

@@ -75,7 +75,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxinolime>;
green {
led {
label = "a20-olinuxino-lime2:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -111,13 +111,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -154,6 +150,12 @@
vref-supply = <&reg_vcc3v0>;
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -174,23 +176,17 @@
};
&pio {
vcc-pa-supply = <&reg_vcc3v3>;
vcc-pc-supply = <&reg_vcc3v3>;
vcc-pe-supply = <&reg_ldo3>;
vcc-pf-supply = <&reg_vcc3v3>;
vcc-pg-supply = <&reg_ldo4>;
led_pins_olinuxinolime: led-pins {
pins = "PH2";
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
&reg_ahci_5v {
@@ -200,6 +196,14 @@
#include "axp209.dtsi"
&ac_power_supply {
status = "okay";
};
&battery_power_supply {
status = "okay";
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -267,10 +271,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;

32
arch/arm/dts/sun7i-a20-olinuxino-micro.dts
View File

@@ -82,7 +82,7 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_olinuxino>;
green {
led {
label = "a20-olinuxino-micro:green:usr";
gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
@@ -118,13 +118,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -215,6 +211,12 @@
};
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -252,18 +254,6 @@
function = "gpio_out";
drive-strength = <20>;
};
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
usb0_vbus_detect_pin: usb0-vbus-detect-pin {
pins = "PH5";
function = "gpio_in";
bias-pull-down;
};
};
#include "axp209.dtsi"
@@ -355,10 +345,8 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* PH5 */
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;

28
arch/arm/dts/sun7i-a20-orangepi-mini.dts
View File

@@ -75,12 +75,12 @@
leds {
compatible = "gpio-leds";
green {
led-0 {
label = "orangepi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
};
blue {
led-1 {
label = "orangepi:blue:usr";
gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
};
@@ -120,14 +120,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -158,6 +154,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -176,14 +178,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -239,9 +233,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;

26
arch/arm/dts/sun7i-a20-orangepi.dts
View File

@@ -64,7 +64,7 @@
leds {
compatible = "gpio-leds";
green {
led {
label = "orangepi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
};
@@ -96,14 +96,10 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -124,6 +120,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -135,14 +137,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -198,9 +192,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;

32
arch/arm/dts/sun7i-a20-pcduino3-nano.dts
View File

@@ -1,5 +1,5 @@
/*
* Copyright 2015 Adam Sampson <ats@offog.org>
* Copyright 2015-2020 Adam Sampson <ats@offog.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -72,14 +72,12 @@
leds {
compatible = "gpio-leds";
/* Marked "LED3" on the PCB. */
usr1 {
led-3 {
label = "pcduino3-nano:green:usr1";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
};
/* Marked "LED4" on the PCB. */
usr2 {
led-4 {
label = "pcduino3-nano:green:usr2";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
};
@@ -114,13 +112,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&hdmi {
@@ -149,6 +143,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -168,14 +168,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
&reg_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
@@ -226,9 +218,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb1_vbus>;
status = "okay";

28
arch/arm/dts/sun7i-a20-pcduino3.dts
View File

@@ -64,12 +64,12 @@
leds {
compatible = "gpio-leds";
tx {
led-0 {
label = "pcduino3:green:tx";
gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
};
rx {
led-1 {
label = "pcduino3:green:rx";
gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
};
@@ -122,13 +122,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_mii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "mii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -149,6 +145,12 @@
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -168,14 +170,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
&reg_ahci_5v {
gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
status = "okay";
@@ -226,9 +220,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";

13
arch/arm/dts/sun7i-a20-wexler-tab7200.dts
View File

@@ -64,6 +64,7 @@
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
default-brightness-level = <8>;
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
power-supply = <&reg_vcc3v3>;
};
chosen {
@@ -156,14 +157,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pin>;
@@ -223,9 +216,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;

24
arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts
View File

@@ -81,13 +81,9 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy = <&phy1>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&i2c0 {
@@ -110,6 +106,12 @@
#include "axp209.dtsi"
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
@@ -145,14 +147,6 @@
status = "okay";
};
&pio {
usb0_id_detect_pin: usb0-id-detect-pin {
pins = "PH4";
function = "gpio_in";
bias-pull-up;
};
};
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
@@ -206,9 +200,7 @@
};
&usbphy {
pinctrl-names = "default";
pinctrl-0 = <&usb0_id_detect_pin>;
usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;

254
arch/arm/dts/sun7i-a20.dtsi
View File

@@ -47,6 +47,7 @@
#include <dt-bindings/dma/sun4i-a10.h>
#include <dt-bindings/clock/sun7i-a20-ccu.h>
#include <dt-bindings/reset/sun4i-a10-ccu.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
@@ -105,16 +106,15 @@
reg = <0>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
operating-points =
/* kHz uV */
960000 1400000
912000 1400000
864000 1300000
720000 1200000
528000 1100000
312000 1000000
144000 1000000
>;
<960000 1400000>,
<912000 1400000>,
<864000 1300000>,
<720000 1200000>,
<528000 1100000>,
<312000 1000000>,
<144000 1000000>;
#cooling-cells = <2>;
};
@@ -124,22 +124,21 @@
reg = <1>;
clocks = <&ccu CLK_CPU>;
clock-latency = <244144>; /* 8 32k periods */
operating-points = <
operating-points =
/* kHz uV */
960000 1400000
912000 1400000
864000 1300000
720000 1200000
528000 1100000
312000 1000000
144000 1000000
>;
<960000 1400000>,
<912000 1400000>,
<864000 1300000>,
<720000 1200000>,
<528000 1100000>,
<312000 1000000>,
<144000 1000000>;
#cooling-cells = <2>;
};
};
thermal-zones {
cpu_thermal {
cpu-thermal {
/* milliseconds */
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -180,7 +179,7 @@
default-pool {
compatible = "shared-dma-pool";
size = <0x6000000>;
alloc-ranges = <0x4a000000 0x6000000>;
alloc-ranges = <0x40000000 0x10000000>;
reusable;
linux,cma-default;
};
@@ -333,7 +332,7 @@
#dma-cells = <2>;
};
nfc: nand@1c03000 {
nfc: nand-controller@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -376,6 +375,16 @@
num-cs = <1>;
};
csi0: csi@1c09000 {
compatible = "allwinner,sun7i-a20-csi0";
reg = <0x01c09000 0x1000>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>;
clock-names = "bus", "isp", "ram";
resets = <&ccu RST_CSI0>;
status = "disabled";
};
emac: ethernet@1c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
@@ -394,11 +403,12 @@
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun7i-a20-tcon";
compatible = "allwinner,sun7i-a20-tcon0",
"allwinner,sun7i-a20-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON0>;
reset-names = "lcd";
resets = <&ccu RST_TCON0>, <&ccu RST_LVDS>;
reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB_LCD0>,
<&ccu CLK_TCON0_CH0>,
<&ccu CLK_TCON0_CH1>;
@@ -406,6 +416,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
@@ -443,7 +454,8 @@
};
tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun7i-a20-tcon";
compatible = "allwinner,sun7i-a20-tcon1",
"allwinner,sun7i-a20-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_TCON1>;
@@ -455,6 +467,7 @@
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
#clock-cells = <0>;
dmas = <&dma SUN4I_DMA_DEDICATED 15>;
ports {
@@ -586,13 +599,14 @@
phy-names = "usb";
extcon = <&usbphy 0>;
allwinner,sram = <&otg_sram 1>;
dr_mode = "otg";
status = "disabled";
};
usbphy: phy@1c13400 {
#phy-cells = <1>;
compatible = "allwinner,sun7i-a20-usb-phy";
reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&ccu CLK_USB_PHY>;
clock-names = "usb_phy";
@@ -716,6 +730,17 @@
status = "disabled";
};
csi1: csi@1c1d000 {
compatible = "allwinner,sun7i-a20-csi1",
"allwinner,sun4i-a10-csi1";
reg = <0x01c1d000 0x1000>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
clock-names = "bus", "ram";
resets = <&ccu RST_CSI1>;
status = "disabled";
};
spi3: spi@1c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
@@ -751,21 +776,70 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
/omit-if-no-ref/
can_pa_pins: can-pa-pins {
pins = "PA16", "PA17";
function = "can";
};
/omit-if-no-ref/
can_ph_pins: can-ph-pins {
pins = "PH20", "PH21";
function = "can";
};
/omit-if-no-ref/
clk_out_a_pin: clk-out-a-pin {
pins = "PI12";
function = "clk_out_a";
};
/omit-if-no-ref/
clk_out_b_pin: clk-out-b-pin {
pins = "PI13";
function = "clk_out_b";
};
/omit-if-no-ref/
csi0_8bits_pins: csi-8bits-pins {
pins = "PE0", "PE2", "PE3", "PE4", "PE5",
"PE6", "PE7", "PE8", "PE9", "PE10",
"PE11";
function = "csi0";
};
/omit-if-no-ref/
csi0_clk_pin: csi-clk-pin {
pins = "PE1";
function = "csi0";
};
/omit-if-no-ref/
csi1_8bits_pg_pins: csi1-8bits-pg-pins {
pins = "PG0", "PG2", "PG3", "PG4", "PG5",
"PG6", "PG7", "PG8", "PG9", "PG10",
"PG11";
function = "csi1";
};
/omit-if-no-ref/
csi1_24bits_ph_pins: csi1-24bits-ph-pins {
pins = "PH0", "PH1", "PH2", "PH3", "PH4",
"PH5", "PH6", "PH7", "PH8", "PH9",
"PH10", "PH11", "PH12", "PH13", "PH14",
"PH15", "PH16", "PH17", "PH18", "PH19",
"PH20", "PH21", "PH22", "PH23", "PH24",
"PH25", "PH26", "PH27";
function = "csi1";
};
/omit-if-no-ref/
csi1_clk_pg_pin: csi1-clk-pg-pin {
pins = "PG1";
function = "csi1";
};
/omit-if-no-ref/
emac_pa_pins: emac-pa-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -775,6 +849,17 @@
function = "emac";
};
/omit-if-no-ref/
emac_ph_pins: emac-ph-pins {
pins = "PH8", "PH9", "PH10", "PH11",
"PH14", "PH15", "PH16", "PH17",
"PH18", "PH19", "PH20", "PH21",
"PH22", "PH23", "PH24", "PH25",
"PH26";
function = "emac";
};
/omit-if-no-ref/
gmac_mii_pins: gmac-mii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -784,6 +869,7 @@
function = "gmac";
};
/omit-if-no-ref/
gmac_rgmii_pins: gmac-rgmii-pins {
pins = "PA0", "PA1", "PA2",
"PA3", "PA4", "PA5", "PA6",
@@ -798,46 +884,69 @@
drive-strength = <40>;
};
/omit-if-no-ref/
i2c0_pins: i2c0-pins {
pins = "PB0", "PB1";
function = "i2c0";
};
/omit-if-no-ref/
i2c1_pins: i2c1-pins {
pins = "PB18", "PB19";
function = "i2c1";
};
/omit-if-no-ref/
i2c2_pins: i2c2-pins {
pins = "PB20", "PB21";
function = "i2c2";
};
/omit-if-no-ref/
i2c3_pins: i2c3-pins {
pins = "PI0", "PI1";
function = "i2c3";
};
/omit-if-no-ref/
ir0_rx_pin: ir0-rx-pin {
pins = "PB4";
function = "ir0";
};
/omit-if-no-ref/
ir0_tx_pin: ir0-tx-pin {
pins = "PB3";
function = "ir0";
};
/omit-if-no-ref/
ir1_rx_pin: ir1-rx-pin {
pins = "PB23";
function = "ir1";
};
/omit-if-no-ref/
ir1_tx_pin: ir1-tx-pin {
pins = "PB22";
function = "ir1";
};
/omit-if-no-ref/
lcd_lvds0_pins: lcd-lvds0-pins {
pins = "PD0", "PD1", "PD2", "PD3", "PD4",
"PD5", "PD6", "PD7", "PD8", "PD9";
function = "lvds0";
};
/omit-if-no-ref/
lcd_lvds1_pins: lcd-lvds1-pins {
pins = "PD10", "PD11", "PD12", "PD13", "PD14",
"PD15", "PD16", "PD17", "PD18", "PD19";
function = "lvds1";
};
/omit-if-no-ref/
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
@@ -846,6 +955,7 @@
bias-pull-up;
};
/omit-if-no-ref/
mmc2_pins: mmc2-pins {
pins = "PC6", "PC7", "PC8",
"PC9", "PC10", "PC11";
@@ -854,6 +964,7 @@
bias-pull-up;
};
/omit-if-no-ref/
mmc3_pins: mmc3-pins {
pins = "PI4", "PI5", "PI6",
"PI7", "PI8", "PI9";
@@ -862,127 +973,206 @@
bias-pull-up;
};
/omit-if-no-ref/
ps2_0_pins: ps2-0-pins {
pins = "PI20", "PI21";
function = "ps2";
};
/omit-if-no-ref/
ps2_1_ph_pins: ps2-1-ph-pins {
pins = "PH12", "PH13";
function = "ps2";
};
/omit-if-no-ref/
pwm0_pin: pwm0-pin {
pins = "PB2";
function = "pwm";
};
/omit-if-no-ref/
pwm1_pin: pwm1-pin {
pins = "PI3";
function = "pwm";
};
/omit-if-no-ref/
spdif_tx_pin: spdif-tx-pin {
pins = "PB13";
function = "spdif";
bias-pull-up;
};
/omit-if-no-ref/
spi0_pi_pins: spi0-pi-pins {
pins = "PI11", "PI12", "PI13";
function = "spi0";
};
/omit-if-no-ref/
spi0_cs0_pi_pin: spi0-cs0-pi-pin {
pins = "PI10";
function = "spi0";
};
/omit-if-no-ref/
spi0_cs1_pi_pin: spi0-cs1-pi-pin {
pins = "PI14";
function = "spi0";
};
/omit-if-no-ref/
spi1_pi_pins: spi1-pi-pins {
pins = "PI17", "PI18", "PI19";
function = "spi1";
};
/omit-if-no-ref/
spi1_cs0_pi_pin: spi1-cs0-pi-pin {
pins = "PI16";
function = "spi1";
};
/omit-if-no-ref/
spi2_pb_pins: spi2-pb-pins {
pins = "PB15", "PB16", "PB17";
function = "spi2";
};
/omit-if-no-ref/
spi2_cs0_pb_pin: spi2-cs0-pb-pin {
pins = "PB14";
function = "spi2";
};
/omit-if-no-ref/
spi2_pc_pins: spi2-pc-pins {
pins = "PC20", "PC21", "PC22";
function = "spi2";
};
/omit-if-no-ref/
spi2_cs0_pc_pin: spi2-cs0-pc-pin {
pins = "PC19";
function = "spi2";
};
/omit-if-no-ref/
uart0_pb_pins: uart0-pb-pins {
pins = "PB22", "PB23";
function = "uart0";
};
/omit-if-no-ref/
uart0_pf_pins: uart0-pf-pins {
pins = "PF2", "PF4";
function = "uart0";
};
/omit-if-no-ref/
uart1_pa_pins: uart1-pa-pins {
pins = "PA10", "PA11";
function = "uart1";
};
/omit-if-no-ref/
uart1_cts_rts_pa_pins: uart1-cts-rts-pa-pins {
pins = "PA12", "PA13";
function = "uart1";
};
/omit-if-no-ref/
uart2_pa_pins: uart2-pa-pins {
pins = "PA2", "PA3";
function = "uart2";
};
/omit-if-no-ref/
uart2_cts_rts_pa_pins: uart2-cts-rts-pa-pins {
pins = "PA0", "PA1";
function = "uart2";
};
/omit-if-no-ref/
uart2_pi_pins: uart2-pi-pins {
pins = "PI18", "PI19";
function = "uart2";
};
/omit-if-no-ref/
uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins {
pins = "PI16", "PI17";
function = "uart2";
};
/omit-if-no-ref/
uart3_pg_pins: uart3-pg-pins {
pins = "PG6", "PG7";
function = "uart3";
};
/omit-if-no-ref/
uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins {
pins = "PG8", "PG9";
function = "uart3";
};
/omit-if-no-ref/
uart3_ph_pins: uart3-ph-pins {
pins = "PH0", "PH1";
function = "uart3";
};
/omit-if-no-ref/
uart3_cts_rts_ph_pins: uart3-cts-rts-ph-pins {
pins = "PH2", "PH3";
function = "uart3";
};
/omit-if-no-ref/
uart4_pg_pins: uart4-pg-pins {
pins = "PG10", "PG11";
function = "uart4";
};
/omit-if-no-ref/
uart4_ph_pins: uart4-ph-pins {
pins = "PH4", "PH5";
function = "uart4";
};
/omit-if-no-ref/
uart5_ph_pins: uart5-ph-pins {
pins = "PH6", "PH7";
function = "uart5";
};
/omit-if-no-ref/
uart5_pi_pins: uart5-pi-pins {
pins = "PI10", "PI11";
function = "uart5";
};
/omit-if-no-ref/
uart6_pa_pins: uart6-pa-pins {
pins = "PA12", "PA13";
function = "uart6";
};
/omit-if-no-ref/
uart6_pi_pins: uart6-pi-pins {
pins = "PI12", "PI13";
function = "uart6";
};
/omit-if-no-ref/
uart7_pa_pins: uart7-pa-pins {
pins = "PA14", "PA15";
function = "uart7";
};
/omit-if-no-ref/
uart7_pi_pins: uart7-pi-pins {
pins = "PI20", "PI21";
function = "uart7";
@@ -1004,6 +1194,8 @@
wdt: watchdog@1c20c90 {
compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
rtc: rtc@1c20d00 {
@@ -1326,8 +1518,12 @@
snps,fixed-burst;
snps,force_sf_dma_mode;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
gmac_mdio: mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
};
};
hstimer@1c60000 {
@@ -1341,7 +1537,7 @@
};
gic: interrupt-controller@1c81000 {
compatible = "arm,gic-400", "arm,cortex-a7-gic", "arm,cortex-a15-gic";
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,

308
arch/arm/dts/sun8i-a23-a33.dtsi
View File

@@ -42,8 +42,6 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
@@ -51,13 +49,15 @@
/ {
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
chosen {
#address-cells = <1>;
#size-cells = <1>;
ranges;
simplefb_lcd: framebuffer@0 {
simplefb_lcd: framebuffer-lcd0 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
@@ -68,6 +68,12 @@
};
};
de: display-engine {
/* compatible gets set in SoC specific dtsi file */
allwinner,pipelines = <&fe0>;
status = "disabled";
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -118,12 +124,34 @@
};
};
soc@1c00000 {
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
system-control@1c00000 {
compatible = "allwinner,sun8i-a23-system-control";
reg = <0x01c00000 0x30>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
sram_c: sram@1d00000 {
compatible = "mmio-sram";
reg = <0x01d00000 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x01d00000 0x80000>;
ve_sram: sram-section@0 {
compatible = "allwinner,sun8i-a23-sram-c1",
"allwinner,sun4i-a10-sram-c1";
reg = <0x000000 0x80000>;
};
};
};
dma: dma-controller@1c02000 {
compatible = "allwinner,sun8i-a23-dma";
reg = <0x01c02000 0x1000>;
@@ -133,6 +161,60 @@
#dma-cells = <1>;
};
nfc: nand-controller@1c03000 {
compatible = "allwinner,sun8i-a23-nand-controller";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_NAND>;
reset-names = "ahb";
dmas = <&dma 5>;
dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
tcon0: lcd-controller@1c0c000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 12>;
clocks = <&ccu CLK_BUS_LCD>,
<&ccu CLK_LCD_CH0>,
<&ccu 13>;
clock-names = "ahb",
"tcon-ch0",
"lvds-alt";
clock-output-names = "tcon-pixel-clock";
#clock-cells = <0>;
resets = <&ccu RST_BUS_LCD>,
<&ccu RST_BUS_LVDS>;
reset-names = "lcd",
"lvds";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
reg = <0>;
tcon0_in_drc0: endpoint {
remote-endpoint = <&drc0_out_tcon0>;
};
};
tcon0_out: port@1 {
reg = <1>;
};
};
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
@@ -147,6 +229,8 @@
resets = <&ccu RST_BUS_MMC0>;
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -190,21 +274,6 @@
#size-cells = <0>;
};
nfc: nand@1c03000 {
compatible = "allwinner,sun4i-a10-nand";
reg = <0x01c03000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
clock-names = "ahb", "mod";
resets = <&ccu RST_BUS_NAND>;
reset-names = "ahb";
pinctrl-names = "default";
pinctrl-0 = <&nand_pins &nand_pins_cs0 &nand_pins_rb0>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
usb_otg: usb@1c19000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01c19000 0x0400>;
@@ -215,6 +284,7 @@
phys = <&usbphy 0>;
phy-names = "usb";
extcon = <&usbphy 0>;
dr_mode = "otg";
status = "disabled";
};
@@ -276,22 +346,30 @@
#interrupt-cells = <3>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
pins = "PF2", "PF4";
function = "uart0";
i2c0_pins: i2c0-pins {
pins = "PH2", "PH3";
function = "i2c0";
};
uart1_pins_a: uart1@0 {
pins = "PG6", "PG7";
function = "uart1";
i2c1_pins: i2c1-pins {
pins = "PH4", "PH5";
function = "i2c1";
};
uart1_pins_cts_rts_a: uart1-cts-rts@0 {
pins = "PG8", "PG9";
function = "uart1";
i2c2_pins: i2c2-pins {
pins = "PE12", "PE13";
function = "i2c2";
};
mmc0_pins_a: mmc0@0 {
lcd_rgb666_pins: lcd-rgb666-pins {
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
"PD24", "PD25", "PD26", "PD27";
function = "lcd0";
};
mmc0_pins: mmc0-pins {
pins = "PF0", "PF1", "PF2",
"PF3", "PF4", "PF5";
function = "mmc0";
@@ -299,7 +377,7 @@
bias-pull-up;
};
mmc1_pins_a: mmc1@0 {
mmc1_pg_pins: mmc1-pg-pins {
pins = "PG0", "PG1", "PG2",
"PG3", "PG4", "PG5";
function = "mmc1";
@@ -307,7 +385,7 @@
bias-pull-up;
};
mmc2_8bit_pins: mmc2_8bit {
mmc2_8bit_pins: mmc2-8bit-pins {
pins = "PC5", "PC6", "PC8",
"PC9", "PC10", "PC11",
"PC12", "PC13", "PC14",
@@ -324,61 +402,53 @@
function = "nand0";
};
nand_pins_cs0: nand-pins-cs0 {
nand_cs0_pin: nand-cs0-pin {
pins = "PC4";
function = "nand0";
bias-pull-up;
};
nand_pins_cs1: nand-pins-cs1 {
nand_cs1_pin: nand-cs1-pin {
pins = "PC3";
function = "nand0";
bias-pull-up;
};
nand_pins_rb0: nand-pins-rb0 {
nand_rb0_pin: nand-rb0-pin {
pins = "PC6";
function = "nand0";
bias-pull-up;
};
nand_pins_rb1: nand-pins-rb1 {
nand_rb1_pin: nand-rb1-pin {
pins = "PC7";
function = "nand0";
bias-pull-up;
};
pwm0_pins: pwm0 {
pwm0_pin: pwm0-pin {
pins = "PH0";
function = "pwm0";
};
i2c0_pins_a: i2c0@0 {
pins = "PH2", "PH3";
function = "i2c0";
uart0_pf_pins: uart0-pf-pins {
pins = "PF2", "PF4";
function = "uart0";
};
i2c1_pins_a: i2c1@0 {
pins = "PH4", "PH5";
function = "i2c1";
uart1_pg_pins: uart1-pg-pins {
pins = "PG6", "PG7";
function = "uart1";
};
i2c2_pins_a: i2c2@0 {
pins = "PE12", "PE13";
function = "i2c2";
};
lcd_rgb666_pins: lcd-rgb666@0 {
pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
"PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
"PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
"PD24", "PD25", "PD26", "PD27";
function = "lcd0";
uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
pins = "PG8", "PG9";
function = "uart1";
};
};
timer@1c20c00 {
compatible = "allwinner,sun4i-a10-timer";
compatible = "allwinner,sun8i-a23-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -389,6 +459,7 @@
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
pwm: pwm@1c21400 {
@@ -477,6 +548,8 @@
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C0>;
resets = <&ccu RST_BUS_I2C0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -488,6 +561,8 @@
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C1>;
resets = <&ccu RST_BUS_I2C1>;
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -499,6 +574,8 @@
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_I2C2>;
resets = <&ccu RST_BUS_I2C2>;
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
@@ -532,7 +609,7 @@
};
gic: interrupt-controller@1c81000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
compatible = "arm,gic-400";
reg = <0x01c81000 0x1000>,
<0x01c82000 0x2000>,
<0x01c84000 0x2000>,
@@ -542,17 +619,104 @@
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
fe0: display-frontend@1e00000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01e00000 0x20000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
<&ccu CLK_DRAM_DE_FE>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_BUS_DE_FE>;
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
reg = <1>;
fe0_out_be0: endpoint {
remote-endpoint = <&be0_in_fe0>;
};
};
};
};
be0: display-backend@1e60000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01e60000 0x10000>;
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
<&ccu CLK_DRAM_DE_BE>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_BUS_DE_BE>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
reg = <0>;
be0_in_fe0: endpoint {
remote-endpoint = <&fe0_out_be0>;
};
};
be0_out: port@1 {
reg = <1>;
be0_out_drc0: endpoint {
remote-endpoint = <&drc0_in_be0>;
};
};
};
};
drc0: drc@1e70000 {
/* compatible gets set in SoC specific dtsi file */
reg = <0x01e70000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
<&ccu CLK_DRAM_DRC>;
clock-names = "ahb", "mod", "ram";
resets = <&ccu RST_BUS_DRC>;
ports {
#address-cells = <1>;
#size-cells = <0>;
drc0_in: port@0 {
reg = <0>;
drc0_in_be0: endpoint {
remote-endpoint = <&be0_out_drc0>;
};
};
drc0_out: port@1 {
reg = <1>;
drc0_out_tcon0: endpoint {
remote-endpoint = <&tcon0_in_drc0>;
};
};
};
};
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
compatible = "allwinner,sun8i-a23-rtc";
reg = <0x01f00000 0x400>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
clock-output-names = "osc32k";
clock-output-names = "osc32k", "osc32k-out";
clocks = <&ext_osc32k>;
#clock-cells = <1>;
};
nmi_intc: interrupt-controller@1f00c00 {
r_intc: interrupt-controller@1f00c00 {
compatible = "allwinner,sun6i-a31-r-intc";
interrupt-controller;
#interrupt-cells = <2>;
@@ -624,6 +788,20 @@
status = "disabled";
};
r_i2c: i2c@1f02400 {
compatible = "allwinner,sun8i-a23-i2c",
"allwinner,sun6i-a31-i2c";
reg = <0x01f02400 0x400>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&r_i2c_pins>;
clocks = <&apb0_gates 6>;
resets = <&apb0_rst 6>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
@@ -634,18 +812,22 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <0>;
#gpio-cells = <3>;
r_rsb_pins: r_rsb {
r_i2c_pins: r-i2c-pins {
pins = "PL0", "PL1";
function = "s_i2c";
bias-pull-up;
};
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
drive-strength = <20>;
bias-pull-up;
};
r_uart_pins_a: r_uart@0 {
r_uart_pins_a: r-uart-pins {
pins = "PL2", "PL3";
function = "s_uart";
};

20
arch/arm/dts/sun8i-a23-evb.dts
View File

@@ -65,14 +65,10 @@
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
};
@@ -80,21 +76,21 @@
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@190 {
button-190 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <190000>;
};
button@390 {
button-390 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <390000>;
};
button@600 {
button-600 {
label = "Home";
linux,code = <KEY_HOME>;
channel = <0>;
@@ -103,22 +99,12 @@
};
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
vmmc-supply = <&reg_vcc3v0>;
bus-width = <4>;
cd-gpios = <&pio 1 4 GPIO_ACTIVE_LOW>; /* PB4 */
status = "okay";
};
&pio {
mmc0_cd_pin_evb: mmc0_cd_pin@0 {
pins = "PB4";
function = "gpio_in";
bias-pull-up;
};
};
/*
* The RX line has a non-populated resistance. In order to use it, you
* need to solder R207 on the back of the board in order to close the

2
arch/arm/dts/sun8i-a23-gt90h-v4.dts
View File

@@ -63,7 +63,7 @@
};
&lradc {
button@600 {
button-600 {
label = "Back";
linux,code = <KEY_BACK>;
channel = <0>;

56
arch/arm/dts/sunxi-q8-common.dtsi → arch/arm/dts/sun8i-a23-ippo-q8h-v1.2.dts
View File

@@ -40,44 +40,34 @@
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#include "sunxi-common-regulators.dtsi"
/dts-v1/;
#include "sun8i-a23.dtsi"
#include "sun8i-q8-common.dtsi"
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
/ {
model = "Q8 A23 Tablet";
compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
};
&codec {
allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
allwinner,audio-routing =
"Headphone", "HP",
"Headphone", "HPCOM",
"Speaker", "HP",
"MIC1", "Mic",
"MIC2", "Headset Mic",
"Mic", "MBIAS",
"Headset Mic", "HBIAS";
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins_a>;
status = "okay";
&panel {
compatible = "bananapi,s070wv20-ct16";
};
&lradc {
vref-supply = <&reg_vcc3v0>;
status = "okay";
button@200 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <200000>;
};
button@400 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <400000>;
&tcon0_out {
tcon0_out_lcd: endpoint {
remote-endpoint = <&panel_input>;
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_pins>;
status = "okay";
};

73
arch/arm/dts/sun8i-a23-ippo-q8h-v5.dts Normal file
View File

@@ -0,0 +1,73 @@
/*
* Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-a23.dtsi"
#include "sun8i-q8-common.dtsi"
/ {
model = "Q8 A23 Tablet";
compatible = "allwinner,q8-a23", "allwinner,sun8i-a23";
};
&codec {
allwinner,pa-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
allwinner,audio-routing =
"Headphone", "HP",
"Headphone", "HPCOM",
"Speaker", "HP",
"MIC1", "Mic",
"MIC2", "Headset Mic",
"Mic", "MBIAS",
"Headset Mic", "HBIAS";
status = "okay";
};
&panel {
compatible = "bananapi,s070wv20-ct16";
};
&tcon0_out {
tcon0_out_lcd: endpoint {
remote-endpoint = <&panel_input>;
};
};

15
arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts
View File

@@ -54,8 +54,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
post-power-on-delay-ms = <200>;
@@ -71,7 +69,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <&reg_dldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -85,17 +83,6 @@
};
};
&mmc1_pins_a {
bias-pull-up;
};
&r_pio {
wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
pins = "PL6";
function = "gpio_out";
};
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl1680";

15
arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts
View File

@@ -54,8 +54,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
post-power-on-delay-ms = <200>;
@@ -64,7 +62,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>;
pinctrl-0 = <&mmc1_pg_pins>;
vmmc-supply = <&reg_dldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@@ -78,17 +76,6 @@
};
};
&mmc1_pins_a {
bias-pull-up;
};
&r_pio {
wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
pins = "PL6";
function = "gpio_out";
};
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3670";

10
arch/arm/dts/sun8i-a23-q8-tablet.dts
View File

@@ -61,3 +61,13 @@
"Headset Mic", "HBIAS";
status = "okay";
};
&panel {
compatible = "bananapi,s070wv20-ct16";
};
&tcon0_out {
tcon0_out_lcd: endpoint {
remote-endpoint = <&panel_input>;
};
};

Some files were not shown because too many files have changed in this diff Show More