Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'

arch/arm/cpu/armv7/am33xx/board.c

@@ -27,6 +27,7 @@
 #include <miiphy.h>
 #include <cpsw.h>
 #include <asm/errno.h>
+#include <linux/compiler.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/musb.h>
@@ -137,6 +138,16 @@ int arch_misc_init(void)
 }
 
 #if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+/*
+ * This function is the place to do per-board things such as ramp up the
+ * MPU clock frequency.
+ */
+__weak void am33xx_spl_board_init(void)
+{
+	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
+	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
+}
+
 static void rtc32k_enable(void)
 {
 	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;

arch/arm/cpu/armv7/am33xx/clock_am33xx.c

@@ -51,10 +51,14 @@ const struct dpll_regs dpll_ddr_regs = {
 	.cm_div_m2_dpll		= CM_WKUP + 0xA0,
 };
 
-const struct dpll_params dpll_mpu = {
+struct dpll_params dpll_mpu_opp100 = {
 		CONFIG_SYS_MPUCLK, OSC-1, 1, -1, -1, -1, -1};
-const struct dpll_params dpll_core = {
+const struct dpll_params dpll_core_opp100 = {
 		1000, OSC-1, -1, -1, 10, 8, 4};
+const struct dpll_params dpll_mpu = {
+		MPUPLL_M_300, OSC-1, 1, -1, -1, -1, -1};
+const struct dpll_params dpll_core = {
+		50, OSC-1, -1, -1, 1, 1, 1};
 const struct dpll_params dpll_per = {
 		960, OSC-1, 5, -1, -1, -1, -1};
 

arch/arm/cpu/armv7/am33xx/sys_info.c

@@ -17,6 +17,7 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/clock.h>
+#include <power/tps65910.h>
 
 struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
 
@@ -119,3 +120,59 @@ int print_cpuinfo(void)
 	return 0;
 }
 #endif	/* CONFIG_DISPLAY_CPUINFO */
+
+#ifdef CONFIG_AM33XX
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev)
+{
+	int sil_rev;
+
+	sil_rev = readl(&cdev->deviceid) >> 28;
+
+	if (sil_rev == 1)
+		/* PG 2.0, efuse may not be set. */
+		return MPUPLL_M_800;
+	else if (sil_rev >= 2) {
+		/* Check what the efuse says our max speed is. */
+		int efuse_arm_mpu_max_freq;
+		efuse_arm_mpu_max_freq = readl(&cdev->efuse_sma);
+		switch ((efuse_arm_mpu_max_freq & DEVICE_ID_MASK)) {
+		case AM335X_ZCZ_1000:
+			return MPUPLL_M_1000;
+		case AM335X_ZCZ_800:
+			return MPUPLL_M_800;
+		case AM335X_ZCZ_720:
+			return MPUPLL_M_720;
+		case AM335X_ZCZ_600:
+		case AM335X_ZCE_600:
+			return MPUPLL_M_600;
+		case AM335X_ZCZ_300:
+		case AM335X_ZCE_300:
+			return MPUPLL_M_300;
+		}
+	}
+
+	/* PG 1.0 or otherwise unknown, use the PG1.0 max */
+	return MPUPLL_M_720;
+}
+
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency)
+{
+	/* For PG2.1 and later, we have one set of values. */
+	if (sil_rev >= 2) {
+		switch (frequency) {
+		case MPUPLL_M_1000:
+			return TPS65910_OP_REG_SEL_1_3_2_5;
+		case MPUPLL_M_800:
+			return TPS65910_OP_REG_SEL_1_2_6;
+		case MPUPLL_M_720:
+			return TPS65910_OP_REG_SEL_1_2_0;
+		case MPUPLL_M_600:
+		case MPUPLL_M_300:
+			return TPS65910_OP_REG_SEL_1_1_3;
+		}
+	}
+
+	/* Default to PG1.0/PG2.0 values. */
+	return TPS65910_OP_REG_SEL_1_1_3;
+}
+#endif

arch/arm/cpu/armv7/omap-common/boot-common.c

@@ -76,6 +76,9 @@ void spl_board_init(void)
 #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT)
 	arch_misc_init();
 #endif
+#ifdef CONFIG_AM33XX
+	am33xx_spl_board_init();
+#endif
 }
 
 int board_mmc_init(bd_t *bis)

arch/arm/cpu/armv7/omap-common/clocks-common.c

@@ -589,13 +589,6 @@ void scale_vcores(struct vcores_data const *vcores)
 
 	val = optimize_vcore_voltage(&vcores->iva);
 	do_scale_vcore(vcores->iva.addr, val, vcores->iva.pmic);
-
-	 if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) {
-		/* Configure LDO SRAM "magic" bits */
-		writel(2, (*prcm)->prm_sldo_core_setup);
-		writel(2, (*prcm)->prm_sldo_mpu_setup);
-		writel(2, (*prcm)->prm_sldo_mm_setup);
-	}
 }
 
 static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode)

arch/arm/cpu/armv7/omap5/prcm-regs.c

@@ -286,12 +286,6 @@ struct prcm_regs const omap5_es1_prcm = {
 	.prm_vc_val_bypass = 0x4ae07ba0,
 	.prm_vc_cfg_i2c_mode = 0x4ae07bb4,
 	.prm_vc_cfg_i2c_clk = 0x4ae07bb8,
-	.prm_sldo_core_setup = 0x4ae07bc4,
-	.prm_sldo_core_ctrl = 0x4ae07bc8,
-	.prm_sldo_mpu_setup = 0x4ae07bcc,
-	.prm_sldo_mpu_ctrl = 0x4ae07bd0,
-	.prm_sldo_mm_setup = 0x4ae07bd4,
-	.prm_sldo_mm_ctrl = 0x4ae07bd8,
 
 	/* SCRM stuff, used by some boards */
 	.scrm_auxclk0 = 0x4ae0a310,
@@ -735,12 +729,6 @@ struct prcm_regs const omap5_es2_prcm = {
 	.prm_vc_cfg_i2c_mode = 0x4ae07cb4,
 	.prm_vc_cfg_i2c_clk = 0x4ae07cb8,
 
-	.prm_sldo_core_setup = 0x4ae07cc4,
-	.prm_sldo_core_ctrl = 0x4ae07cc8,
-	.prm_sldo_mpu_setup = 0x4ae07ccc,
-	.prm_sldo_mpu_ctrl = 0x4ae07cd0,
-	.prm_sldo_mm_setup = 0x4ae07cd4,
-	.prm_sldo_mm_ctrl = 0x4ae07cd8,
 	.prm_abbldo_mpu_setup = 0x4ae07cdc,
 	.prm_abbldo_mpu_ctrl = 0x4ae07ce0,
 

arch/arm/include/asm/arch-am33xx/clocks_am33xx.h

@@ -11,9 +11,17 @@
 #ifndef _CLOCKS_AM33XX_H_
 #define _CLOCKS_AM33XX_H_
 
+/* MAIN PLL Fdll supported frequencies */
+#define MPUPLL_M_1000	1000
+#define MPUPLL_M_800	800
+#define MPUPLL_M_720	720
+#define MPUPLL_M_600	600
+#define MPUPLL_M_550	550
+#define MPUPLL_M_300	300
+
 /* MAIN PLL Fdll = 550 MHz, by default */
 #ifndef CONFIG_SYS_MPUCLK
-#define CONFIG_SYS_MPUCLK	550
+#define CONFIG_SYS_MPUCLK	MPUPLL_M_550
 #endif
 
 #define UART_RESET		(0x1 << 1)
@@ -21,5 +29,7 @@
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
 extern void enable_dmm_clocks(void);
+extern const struct dpll_params dpll_core_opp100;
+extern struct dpll_params dpll_mpu_opp100;
 
 #endif	/* endif _CLOCKS_AM33XX_H_ */

arch/arm/include/asm/arch-am33xx/cpu.h

@@ -38,6 +38,16 @@
 #define AM335X				0xB944
 #define TI81XX				0xB81E
 #define DEVICE_ID			(CTRL_BASE + 0x0600)
+#define DEVICE_ID_MASK			0x1FFF
+
+/* MPU max frequencies */
+#define AM335X_ZCZ_300			0x1FEF
+#define AM335X_ZCZ_600			0x1FAF
+#define AM335X_ZCZ_720			0x1F2F
+#define AM335X_ZCZ_800			0x1E2F
+#define AM335X_ZCZ_1000			0x1C2F
+#define AM335X_ZCE_300			0x1FDF
+#define AM335X_ZCE_600			0x1F9F
 
 /* This gives the status of the boot mode pins on the evm */
 #define SYSBOOT_MASK			(BIT(0) | BIT(1) | BIT(2)\
@@ -509,6 +519,8 @@ struct ctrl_dev {
 	unsigned int macid1h;		/* offset 0x3c */
 	unsigned int resv4[4];
 	unsigned int miisel;		/* offset 0x50 */
+	unsigned int resv5[106];
+	unsigned int efuse_sma;		/* offset 0x1FC */
 };
 
 /* gmii_sel register defines */

arch/arm/include/asm/arch-am33xx/sys_proto.h

@@ -10,6 +10,7 @@
 
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
+#include <asm/arch/cpu.h>
 
 #define BOARD_REV_ID	0x0
 
@@ -42,4 +43,7 @@ u32 wait_on_value(u32, u32, void *, u32);
 #ifdef CONFIG_NOR_BOOT
 void enable_norboot_pin_mux(void);
 #endif
+void am33xx_spl_board_init(void);
+int am335x_get_efuse_mpu_max_freq(struct ctrl_dev *cdev);
+int am335x_get_tps65910_mpu_vdd(int sil_rev, int frequency);
 #endif

arch/arm/include/asm/omap_common.h

@@ -310,12 +310,6 @@ struct prcm_regs {
 	u32 prm_vc_val_bypass;
 	u32 prm_vc_cfg_i2c_mode;
 	u32 prm_vc_cfg_i2c_clk;
-	u32 prm_sldo_core_setup;
-	u32 prm_sldo_core_ctrl;
-	u32 prm_sldo_mpu_setup;
-	u32 prm_sldo_mpu_ctrl;
-	u32 prm_sldo_mm_setup;
-	u32 prm_sldo_mm_ctrl;
 	u32 prm_abbldo_mpu_setup;
 	u32 prm_abbldo_mpu_ctrl;