leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

net: tsec: Use tsec_private pointer as the parameter for internal routines

Browse Source 
For internal routines like redundant_init(), startup_tsec() and
init_phy(), change to use tsec_private pointer as the parameter.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Bin Meng 2016-01-11 22:41:22 -08:00 committed by Joe Hershberger
parent 8ba50176fc
commit 56a27a1e6c
2 changed files with 12 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
drivers/net/tsec.c
View File

@ -328,9 +328,8 @@ static void tsec_halt(struct eth_device *dev)
* of the eTSEC port initialization sequence,
* the eTSEC Rx logic may not be properly initialized.
*/
void redundant_init(struct eth_device *dev)
void redundant_init(struct tsec_private *priv)
{
struct tsec_private *priv = dev->priv;
struct tsec __iomem *regs = priv->regs;
uint t, count = 0;
int fail = 1;
@ -365,14 +364,14 @@ void redundant_init(struct eth_device *dev)
do {
uint16_t status;
tsec_send(dev, (void *)pkt, sizeof(pkt));
tsec_send(priv->dev, (void *)pkt, sizeof(pkt));
/* Wait for buffer to be received */
for (t = 0;
in_be16(&priv->rxbd[priv->rx_idx].status) & RXBD_EMPTY;
t++) {
if (t >= 10 * TOUT_LOOP) {
printf("%s: tsec: rx error\n", dev->name);
printf("%s: tsec: rx error\n", priv->dev->name);
break;
}
}
@ -412,9 +411,8 @@ void redundant_init(struct eth_device *dev)
* Set up the buffers and their descriptors, and bring up the
* interface
*/
static void startup_tsec(struct eth_device *dev)
static void startup_tsec(struct tsec_private *priv)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct tsec __iomem *regs = priv->regs;
uint16_t status;
int i;
@ -451,7 +449,7 @@ static void startup_tsec(struct eth_device *dev)
#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
svr = get_svr();
if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0))
redundant_init(dev);
redundant_init(priv);
#endif
/* Enable Transmit and Receive */
setbits_be32(&regs->maccfg1, MACCFG1_RX_EN | MACCFG1_TX_EN);
@ -504,7 +502,7 @@ static int tsec_init(struct eth_device *dev, bd_t * bd)
init_registers(regs);
/* Ready the device for tx/rx */
startup_tsec(dev);
startup_tsec(priv);
/* Start up the PHY */
ret = phy_startup(priv->phydev);
@ -567,9 +565,8 @@ static phy_interface_t tsec_get_interface(struct tsec_private *priv)
* properly. If the PHY is not recognized, then return 0
* (failure). Otherwise, return 1
*/
static int init_phy(struct eth_device *dev)
static int init_phy(struct tsec_private *priv)
{
struct tsec_private *priv = (struct tsec_private *)dev->priv;
struct phy_device *phydev;
struct tsec __iomem *regs = priv->regs;
u32 supported = (SUPPORTED_10baseT_Half |
@ -588,7 +585,8 @@ static int init_phy(struct eth_device *dev)
if (priv->interface == PHY_INTERFACE_MODE_SGMII)
tsec_configure_serdes(priv);
phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface);
phydev = phy_connect(priv->bus, priv->phyaddr, priv->dev,
priv->interface);
if (!phydev)
return 0;
@ -633,6 +631,7 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
sprintf(dev->name, tsec_info->devname);
priv->interface = tsec_info->interface;
priv->bus = miiphy_get_dev_by_name(tsec_info->mii_devname);
priv->dev = dev;
dev->iobase = 0;
dev->priv = priv;
dev->init = tsec_init;
@ -655,7 +654,7 @@ static int tsec_initialize(bd_t *bis, struct tsec_info_struct *tsec_info)
clrbits_be32(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
/* Try to initialize PHY here, and return */
return init_phy(dev);
return init_phy(priv);
}
/*

1
include/tsec.h
View File

@ -402,6 +402,7 @@ struct tsec_private {
u32 flags;
uint rx_idx; /* index of the current RX buffer */
uint tx_idx; /* index of the current TX buffer */
struct eth_device *dev;
};
struct tsec_info_struct {