MIPS: add support for Broadcom MIPS BCM6318 SoC family

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

arch/mips/dts/brcm,bcm6318.dtsi

@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <dt-bindings/clock/bcm6318-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/power-domain/bcm6318-power-domain.h>
+#include <dt-bindings/reset/bcm6318-reset.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "brcm,bcm6318";
+
+	aliases {
+		spi0 = &spi;
+	};
+
+	cpus {
+		reg = <0x10000000 0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		u-boot,dm-pre-reloc;
+
+		cpu@0 {
+			compatible = "brcm,bcm6318-cpu", "mips,mips4Kc";
+			device_type = "cpu";
+			reg = <0>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <250000000>;
+		};
+
+		periph_osc: periph-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+			u-boot,dm-pre-reloc;
+		};
+
+		periph_clk: periph-clk {
+			compatible = "brcm,bcm6345-clk";
+			reg = <0x10000004 0x4>;
+			#clock-cells = <1>;
+		};
+	};
+
+	ubus {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		u-boot,dm-pre-reloc;
+
+		periph_rst: reset-controller@10000010 {
+			compatible = "brcm,bcm6345-reset";
+			reg = <0x10000010 0x4>;
+			#reset-cells = <1>;
+		};
+
+		wdt: watchdog@10000068 {
+			compatible = "brcm,bcm6345-wdt";
+			reg = <0x10000068 0xc>;
+			clocks = <&periph_osc>;
+		};
+
+		wdt-reboot {
+			compatible = "wdt-reboot";
+			wdt = <&wdt>;
+		};
+
+		pll_cntl: syscon@10000074 {
+			compatible = "syscon";
+			reg = <0x10000074 0x4>;
+		};
+
+		syscon-reboot {
+			compatible = "syscon-reboot";
+			regmap = <&pll_cntl>;
+			offset = <0x0>;
+			mask = <0x1>;
+		};
+
+		gpio1: gpio-controller@10000080 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10000080 0x4>, <0x10000088 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <18>;
+
+			status = "disabled";
+		};
+
+		gpio0: gpio-controller@10000084 {
+			compatible = "brcm,bcm6345-gpio";
+			reg = <0x10000084 0x4>, <0x1000008c 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			status = "disabled";
+		};
+
+		uart0: serial@10000100 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x10000100 0x18>;
+			clocks = <&periph_osc>;
+
+			status = "disabled";
+		};
+
+		leds: led-controller@10000200 {
+			compatible = "brcm,bcm6328-leds";
+			reg = <0x10000200 0x28>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		periph_pwr: power-controller@100008e8 {
+			compatible = "brcm,bcm6328-power-domain";
+			reg = <0x100008e8 0x4>;
+			#power-domain-cells = <1>;
+		};
+
+		spi: spi@10003000 {
+			compatible = "brcm,bcm6328-hsspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x10003000 0x600>;
+			clocks = <&periph_clk BCM6318_CLK_HSSPI>, <&hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			resets = <&periph_rst BCM6318_RST_SPI>;
+			spi-max-frequency = <33333334>;
+			num-cs = <3>;
+
+			status = "disabled";
+		};
+
+		memory-controller@10004000 {
+			compatible = "brcm,bcm6318-mc";
+			reg = <0x10004000 0x38>;
+			u-boot,dm-pre-reloc;
+		};
+	};
+};

arch/mips/mach-bmips/Kconfig

@@ -6,6 +6,7 @@ config SYS_MALLOC_F_LEN
 
 config SYS_SOC
 	default "bcm3380" if SOC_BMIPS_BCM3380
+	default "bcm6318" if SOC_BMIPS_BCM6318
 	default "bcm6328" if SOC_BMIPS_BCM6328
 	default "bcm6338" if SOC_BMIPS_BCM6338
 	default "bcm6348" if SOC_BMIPS_BCM6348
@@ -27,6 +28,17 @@ config SOC_BMIPS_BCM3380
 	help
 	  This supports BMIPS BCM3380 family.
 
+config SOC_BMIPS_BCM6318
+	bool "BMIPS BCM6318 family"
+	select SUPPORTS_BIG_ENDIAN
+	select SUPPORTS_CPU_MIPS32_R1
+	select MIPS_TUNE_4KC
+	select MIPS_L1_CACHE_SHIFT_4
+	select SWAP_IO_SPACE
+	select SYSRESET_SYSCON
+	help
+	  This supports BMIPS BCM6318 family.
+
 config SOC_BMIPS_BCM6328
 	bool "BMIPS BCM6328 family"
 	select SUPPORTS_BIG_ENDIAN