watchdog: add gpio watchdog driver
A rather common kind of external watchdog circuit is one that is kept alive by toggling a gpio. Add a driver for handling such a watchdog. The corresponding linux driver apparently has support for some watchdog circuits which can be disabled by tri-stating the gpio, but I have never actually encountered such a chip in the wild; the whole point of adding an external watchdog is usually that it is not in any way under software control. For forward-compatibility, and to make DT describe the hardware, the current driver only supports devices that have the always-running property. I went a little back and forth on whether I should fail ->probe or only ->start, and ended up deciding ->start was the right place. The compatible string is probably a little odd as it has nothing to do with linux per se - however, I chose that to make .dts snippets reusable between device trees used with U-Boot and linux, and this is the (only) compatible string that linux' corresponding driver and DT binding accepts. I have asked whether one should/could add "wdt-gpio" to that binding, but the answer was no: https://lore.kernel.org/lkml/CAL_JsqKEGaFpiFV_oAtE+S_bnHkg4qry+bhx2EDs=NSbVf_giA@mail.gmail.com/ If someone feels strongly about this, I can certainly remove the "linux," part from the string - it probably wouldn't the only place where one can't reuse a DT snippet as-is between linux and U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
This commit is contained in:
parent
492ee6b8d0
commit
2ac8490412
19
doc/device-tree-bindings/watchdog/gpio-wdt.txt
Normal file
19
doc/device-tree-bindings/watchdog/gpio-wdt.txt
Normal file
@ -0,0 +1,19 @@
|
||||
GPIO watchdog timer
|
||||
|
||||
Describes a simple watchdog timer which is reset by toggling a gpio.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Must be "linux,wdt-gpio".
|
||||
- gpios: gpio to toggle when wdt driver reset method is called.
|
||||
- always-running: Boolean property indicating that the watchdog cannot
|
||||
be disabled. At present, U-Boot only supports this kind of GPIO
|
||||
watchdog.
|
||||
|
||||
Example:
|
||||
|
||||
gpio-wdt {
|
||||
gpios = <&gpio0 1 0>;
|
||||
compatible = "linux,wdt-gpio";
|
||||
always-running;
|
||||
};
|
@ -147,6 +147,15 @@ config WDT_CORTINA
|
||||
This driver support all CPU ISAs supported by Cortina
|
||||
Access CAxxxx SoCs.
|
||||
|
||||
config WDT_GPIO
|
||||
bool "External gpio watchdog support"
|
||||
depends on WDT
|
||||
depends on DM_GPIO
|
||||
help
|
||||
Support for external watchdog fed by toggling a gpio. See
|
||||
doc/device-tree-bindings/watchdog/gpio-wdt.txt for
|
||||
information on how to describe the watchdog in device tree.
|
||||
|
||||
config WDT_MPC8xx
|
||||
bool "MPC8xx watchdog timer support"
|
||||
depends on WDT && MPC8xx
|
||||
|
@ -25,6 +25,7 @@ obj-$(CONFIG_WDT_BOOKE) += booke_wdt.o
|
||||
obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o
|
||||
obj-$(CONFIG_WDT_ORION) += orion_wdt.o
|
||||
obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
|
||||
obj-$(CONFIG_WDT_GPIO) += gpio_wdt.o
|
||||
obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
|
||||
obj-$(CONFIG_WDT_MT7620) += mt7620_wdt.o
|
||||
obj-$(CONFIG_WDT_MT7621) += mt7621_wdt.o
|
||||
|
68
drivers/watchdog/gpio_wdt.c
Normal file
68
drivers/watchdog/gpio_wdt.c
Normal file
@ -0,0 +1,68 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
#include <dm.h>
|
||||
#include <dm/device_compat.h>
|
||||
#include <wdt.h>
|
||||
#include <asm/gpio.h>
|
||||
|
||||
struct gpio_wdt_priv {
|
||||
struct gpio_desc gpio;
|
||||
bool always_running;
|
||||
int state;
|
||||
};
|
||||
|
||||
static int gpio_wdt_reset(struct udevice *dev)
|
||||
{
|
||||
struct gpio_wdt_priv *priv = dev_get_priv(dev);
|
||||
|
||||
priv->state = !priv->state;
|
||||
|
||||
return dm_gpio_set_value(&priv->gpio, priv->state);
|
||||
}
|
||||
|
||||
static int gpio_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
|
||||
{
|
||||
struct gpio_wdt_priv *priv = dev_get_priv(dev);
|
||||
|
||||
if (priv->always_running)
|
||||
return 0;
|
||||
|
||||
return -ENOSYS;
|
||||
}
|
||||
|
||||
static int dm_probe(struct udevice *dev)
|
||||
{
|
||||
struct gpio_wdt_priv *priv = dev_get_priv(dev);
|
||||
int ret;
|
||||
|
||||
priv->always_running = dev_read_bool(dev, "always-running");
|
||||
ret = gpio_request_by_name(dev, "gpios", 0, &priv->gpio, GPIOD_IS_OUT);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "Request for wdt gpio failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (priv->always_running)
|
||||
ret = gpio_wdt_reset(dev);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct wdt_ops gpio_wdt_ops = {
|
||||
.start = gpio_wdt_start,
|
||||
.reset = gpio_wdt_reset,
|
||||
};
|
||||
|
||||
static const struct udevice_id gpio_wdt_ids[] = {
|
||||
{ .compatible = "linux,wdt-gpio" },
|
||||
{}
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(wdt_gpio) = {
|
||||
.name = "wdt_gpio",
|
||||
.id = UCLASS_WDT,
|
||||
.of_match = gpio_wdt_ids,
|
||||
.ops = &gpio_wdt_ops,
|
||||
.probe = dm_probe,
|
||||
.priv_auto = sizeof(struct gpio_wdt_priv),
|
||||
};
|
Loading…
Reference in New Issue
Block a user