Convert CONFIG_ENV_IS_IN_SPI_FLASH et al to Kconfig

This converts the following to Kconfig:
   CONFIG_ENV_IS_IN_SPI_FLASH
   CONFIG_ENV_IS_NOWHERE
   CONFIG_ENV_OFFSET
   CONFIG_ENV_OVERWRITE
   CONFIG_ENV_SECT_SIZE
   CONFIG_SYS_MMC_ENV_DEV
   CONFIG_SYS_MMC_ENV_PART

Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2021-11-07 22:59:38 -05:00
parent 1ed68f9204
commit 27480e0a9f
22 changed files with 9 additions and 50 deletions

View File

@ -45,6 +45,7 @@ CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_FAT=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_MMC_ENV_DEV=1
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y

View File

@ -61,6 +61,7 @@ CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent interrupts"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=2

View File

@ -61,6 +61,7 @@ CONFIG_CMD_FAT=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="interrupt-parent interrupts"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_DEV=2

View File

@ -41,6 +41,7 @@ CONFIG_CMD_CACHE=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_NET_RANDOM_ETHADDR=y

View File

@ -63,6 +63,7 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=0

View File

@ -64,6 +64,7 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=0

View File

@ -66,6 +66,7 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=0

View File

@ -63,6 +63,7 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=0

View File

@ -38,6 +38,7 @@ CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_LOG=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_USE_ENV_SPI_BUS=y
CONFIG_ENV_SPI_BUS=0

View File

@ -41,8 +41,6 @@
#define USDHC2_BASE_ADDR 0x5B020000
#define USDHC3_BASE_ADDR 0x5B030000
#define CONFIG_ENV_OVERWRITE
/* Boot M4 */
#define M4_BOOT_ENV \
"m4_0_image=m4_0.bin\0" \

View File

@ -31,9 +31,6 @@
"stdout=vidconsole,serial\0" \
"stderr=vidconsole,serial\0"
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0x003f8000
#define CONFIG_TPL_TEXT_BASE 0xffff8000
#define CONFIG_SYS_NS16550_MEM32

View File

@ -88,8 +88,6 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */

View File

@ -116,8 +116,6 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM 0x40000000
#if CONFIG_IS_ENABLED(IMX8MN_BEACON_2GB_LPDDR)

View File

@ -74,7 +74,6 @@
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MMCROOT "/dev/mmcblk2p2"
#define CONFIG_SYS_SDRAM_BASE 0x80000000

View File

@ -35,15 +35,6 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* environment settings */
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
#elif defined(CONFIG_ENV_IS_IN_NAND)
#undef CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE (128 << 10)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#endif
/* NAND */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000

View File

@ -20,9 +20,6 @@
#define CONFIG_LAST_STAGE_INIT
/* Allow environment variable to be overwritten */
#define CONFIG_ENV_OVERWRITE
/* Autoboot options */
#define CONFIG_RESET_TO_RETRY
#define CONFIG_BOOT_RETRY_TIME -1
@ -37,11 +34,6 @@
"ethrotate=yes\0" \
"autoload=0\0"
/** Environment defines */
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

View File

@ -45,9 +45,6 @@
/** Heap size for U-Boot */
/* Allow environment variable to be overwritten */
#define CONFIG_ENV_OVERWRITE
/* Autoboot options */
#define CONFIG_RESET_TO_RETRY
#define CONFIG_BOOT_RETRY_TIME -1
@ -70,11 +67,6 @@
# define CONFIG_SF_DEFAULT_CS 0
#endif
/** Environment defines */
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
#endif
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /** Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

View File

@ -32,12 +32,6 @@
#define CONFIG_SPL_GD_ADDR 0x85000000
#endif
/* -------------------------------------------------
* Environment
*/
//Disable persistent environment variable storage
#define CONFIG_ENV_IS_NOWHERE 1
/* ---------------------------------------------------------------------
* Board boot configuration
*/

View File

@ -59,8 +59,6 @@
/* Flash device info */
/*#define CONFIG_ENV_IS_IN_SPI_FLASH*/
#ifndef CONFIG_SPL_BUILD
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT "nor0=ff705000.spi.0"

View File

@ -122,10 +122,6 @@
* Environment is embedded in u-boot in the second sector of the flash
*/
#if defined(CONFIG_CF_SBF)
#define CONFIG_ENV_IS_IN_SPI_FLASH 1
#endif
/* Cache Configuration */
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - 8)

View File

@ -38,8 +38,6 @@
#define CONFIG_PL011_CLOCK UART_CLK
#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)}
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
/* Support MTD */
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BASE (0x08000000)

View File

@ -54,7 +54,6 @@
# error "is set"
# endif
extern unsigned long nand_env_oob_offset;
# define CONFIG_ENV_OFFSET nand_env_oob_offset
# endif /* CONFIG_ENV_OFFSET_OOB */
#endif /* CONFIG_ENV_IS_IN_NAND */