leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

net: phy: dp83867: rework delay rgmii delay handling

Browse Source 
Based on commit c11669a2757e ("net: phy: dp83867: Rework delay rgmii delay
handling") of mainline linux kernel.

The current code is assuming the reset default of the delay control
register was to have delay disabled.  This is what the datasheet shows as
the register's initial value.  However, that's not actually true: the
default is controlled by the PHY's pin strapping.

This patch:
- insures the other direction's delay is disabled If the interface mode is
selected as RX or TX delay only
- validates the delay values and fail if they are not in range
- checks if the board is strapped to have a delay and is configured to use
"rgmii" mode and warning is generated that "rgmii-id" should have been
used.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Grygorii Strashko 2019-11-18 23:04:44 +02:00 committed by Joe Hershberger
parent b3b9b128d5
commit 20f7ea4c35
1 changed files with 64 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

76
drivers/net/phy/dp83867.c
View File

@ -25,6 +25,7 @@
#define DP83867_CFG4 0x0031
#define DP83867_RGMIICTL 0x0032
#define DP83867_STRAP_STS1 0x006E
#define DP83867_STRAP_STS2 0x006f
#define DP83867_RGMIIDCTL 0x0086
#define DP83867_IO_MUX_CFG 0x0170
@ -52,6 +53,13 @@
/* STRAP_STS1 bits */
#define DP83867_STRAP_STS1_RESERVED BIT(11)
/* STRAP_STS2 bits */
#define DP83867_STRAP_STS2_CLK_SKEW_TX_MASK GENMASK(6, 4)
#define DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT 4
#define DP83867_STRAP_STS2_CLK_SKEW_RX_MASK GENMASK(2, 0)
#define DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT 0
#define DP83867_STRAP_STS2_CLK_SKEW_NONE BIT(2)
/* PHY CTRL bits */
#define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14
#define DP83867_PHYCR_RESERVED_MASK BIT(11)
@ -63,7 +71,9 @@
#define DP83867_PHYCTRL_TXFIFO_SHIFT 14
/* RGMIIDCTL bits */
#define DP83867_RGMII_TX_CLK_DELAY_MAX 0xf
#define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4
#define DP83867_RGMII_RX_CLK_DELAY_MAX 0xf
/* CFG2 bits */
#define MII_DP83867_CFG2_SPEEDOPT_10EN 0x0040
@ -74,8 +84,6 @@
#define MII_DP83867_CFG2_MASK 0x003F
/* User setting - can be taken from DTS */
#define DEFAULT_RX_ID_DELAY DP83867_RGMIIDCTL_2_25_NS
#define DEFAULT_TX_ID_DELAY DP83867_RGMIIDCTL_2_75_NS
#define DEFAULT_FIFO_DEPTH DP83867_PHYCR_FIFO_DEPTH_4_B_NIB
/* IO_MUX_CFG bits */
@ -98,8 +106,8 @@ enum {
};
struct dp83867_private {
int rx_id_delay;
int tx_id_delay;
u32 rx_id_delay;
u32 tx_id_delay;
int fifo_depth;
int io_impedance;
bool rxctrl_strap_quirk;
@ -168,13 +176,55 @@ static int dp83867_of_init(struct phy_device *phydev)
if (ofnode_read_bool(node, "ti,dp83867-rxctrl-strap-quirk"))
dp83867->rxctrl_strap_quirk = true;
dp83867->rx_id_delay = ofnode_read_u32_default(node,
"ti,rx-internal-delay",
DEFAULT_RX_ID_DELAY);
dp83867->tx_id_delay = ofnode_read_u32_default(node,
"ti,tx-internal-delay",
DEFAULT_TX_ID_DELAY);
/* Existing behavior was to use default pin strapping delay in rgmii
* mode, but rgmii should have meant no delay. Warn existing users.
*/
if (phydev->interface == PHY_INTERFACE_MODE_RGMII) {
u16 val = phy_read_mmd(phydev, DP83867_DEVADDR,
DP83867_STRAP_STS2);
u16 txskew = (val & DP83867_STRAP_STS2_CLK_SKEW_TX_MASK) >>
DP83867_STRAP_STS2_CLK_SKEW_TX_SHIFT;
u16 rxskew = (val & DP83867_STRAP_STS2_CLK_SKEW_RX_MASK) >>
DP83867_STRAP_STS2_CLK_SKEW_RX_SHIFT;
if (txskew != DP83867_STRAP_STS2_CLK_SKEW_NONE ||
rxskew != DP83867_STRAP_STS2_CLK_SKEW_NONE)
pr_warn("PHY has delays via pin strapping, but phy-mode = 'rgmii'\n"
"Should be 'rgmii-id' to use internal delays\n");
}
/* RX delay *must* be specified if internal delay of RX is used. */
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
ret = ofnode_read_u32(node, "ti,rx-internal-delay",
&dp83867->rx_id_delay);
if (ret) {
pr_debug("ti,rx-internal-delay must be specified\n");
return ret;
}
if (dp83867->rx_id_delay > DP83867_RGMII_RX_CLK_DELAY_MAX) {
pr_debug("ti,rx-internal-delay value of %u out of range\n",
dp83867->rx_id_delay);
return -EINVAL;
}
}
/* TX delay *must* be specified if internal delay of RX is used. */
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
ret = ofnode_read_u32(node, "ti,tx-internal-delay",
&dp83867->tx_id_delay);
if (ret) {
debug("ti,tx-internal-delay must be specified\n");
return ret;
}
if (dp83867->tx_id_delay > DP83867_RGMII_TX_CLK_DELAY_MAX) {
pr_debug("ti,tx-internal-delay value of %u out of range\n",
dp83867->tx_id_delay);
return -EINVAL;
}
}
dp83867->fifo_depth = ofnode_read_u32_default(node, "ti,fifo-depth",
DEFAULT_FIFO_DEPTH);
@ -191,8 +241,8 @@ static int dp83867_of_init(struct phy_device *phydev)
{
struct dp83867_private *dp83867 = phydev->priv;
dp83867->rx_id_delay = DEFAULT_RX_ID_DELAY;
dp83867->tx_id_delay = DEFAULT_TX_ID_DELAY;
dp83867->rx_id_delay = DP83867_RGMIIDCTL_2_25_NS;
dp83867->tx_id_delay = DP83867_RGMIIDCTL_2_75_NS;
dp83867->fifo_depth = DEFAULT_FIFO_DEPTH;
dp83867->io_impedance = -EINVAL;
@ -281,6 +331,8 @@ static int dp83867_config(struct phy_device *phydev)
val = phy_read_mmd(phydev, DP83867_DEVADDR,
DP83867_RGMIICTL);
val &= ~(DP83867_RGMII_TX_CLK_DELAY_EN |
DP83867_RGMII_RX_CLK_DELAY_EN);
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
val |= (DP83867_RGMII_TX_CLK_DELAY_EN |
DP83867_RGMII_RX_CLK_DELAY_EN);