leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ARM: dts: stm32: Migrate U-boot nodes to U-boot DT files for stm32f7

Browse Source 
In order to prepare and ease future DT synchronization with kernel
DT, migrate all U-boot specific nodes/properties/addons to
U-boot DT files.

Migrate also DT nodes which are not yet available on kernel DT side
as ethernet, ltdc and qspi nodes.

Fix ethernet_mii pins and add missing qspi_pins for stm32746g-eval

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
This commit is contained in:
Patrice Chotard 2019-02-19 00:37:20 +01:00
parent 71dfd5f3f5
commit 01aabf97d1
8 changed files with 719 additions and 599 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

171
arch/arm/dts/stm32746g-eval-u-boot.dtsi Normal file
View File

@ -0,0 +1,171 @@
// SPDX-License-Identifier: GPL-2.0+
#include <stm32f7-u-boot.dtsi>
/{
chosen {
bootargs = "root=/dev/mmcblk0p1 rw rootwait";
};
aliases {
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
mmc0 = &sdio;
spi0 = &qspi;
};
button1 {
compatible = "st,button1";
button-gpio = <&gpioc 13 0>;
};
led1 {
compatible = "st,led1";
led-gpio = <&gpiof 10 0>;
};
};
&fmc {
/*
* Memory configuration from sdram datasheet IS42S32800G-6BLI
*/
bank1: bank@0 {
u-boot,dm-pre-reloc;
st,sdram-control = /bits/ 8 <NO_COL_9
NO_ROW_12
MWIDTH_32
BANKS_4
CAS_2
SDCLK_3
RD_BURST_EN
RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_1
TXSR_1
TRAS_1
TRC_6
TRP_2
TWR_1
TRCD_1>;
st,sdram-refcount = <1539>;
};
};
&mac {
phy-mode = "mii";
};
&pinctrl {
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F746_PA2_FUNC_ETH_MDIO>,
<STM32F746_PC1_FUNC_ETH_MDC>,
<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
slew-rate = <2>;
};
};
fmc_pins: fmc@0 {
pins {
pinmux = <STM32F746_PI10_FUNC_FMC_D31>, /* FMC_D31 */
<STM32F746_PI9_FUNC_FMC_D30>, /* FMC_D30*/
<STM32F746_PI7_FUNC_FMC_D29>, /* FMC_D29 */
<STM32F746_PI6_FUNC_FMC_D28>, /* FMC_D28 */
<STM32F746_PI3_FUNC_FMC_D27>, /* FMC_D27 */
<STM32F746_PI2_FUNC_FMC_D26>, /* FMC_D26 */
<STM32F746_PI1_FUNC_FMC_D25>, /* FMC_D25 */
<STM32F746_PI0_FUNC_FMC_D24>, /* FMC_D24 */
<STM32F746_PH15_FUNC_FMC_D23>, /* FMC_D23 */
<STM32F746_PH14_FUNC_FMC_D22>, /* FMC_D22 */
<STM32F746_PH13_FUNC_FMC_D21>, /* FMC_D21 */
<STM32F746_PH12_FUNC_FMC_D20>, /* FMC_D20 */
<STM32F746_PH11_FUNC_FMC_D19>, /* FMC_D19 */
<STM32F746_PH10_FUNC_FMC_D18>, /* FMC_D18 */
<STM32F746_PH9_FUNC_FMC_D17>, /* FMC_D17 */
<STM32F746_PH8_FUNC_FMC_D16>, /* FMC_D16 */
<STM32F746_PD10_FUNC_FMC_D15>, /* FMC_D15 */
<STM32F746_PD9_FUNC_FMC_D14>, /* FMC_D14*/
<STM32F746_PD8_FUNC_FMC_D13>, /* FMC_D13 */
<STM32F746_PE15_FUNC_FMC_D12>,/* FMC_D12 */
<STM32F746_PE14_FUNC_FMC_D11>,/* FMC_D11 */
<STM32F746_PE13_FUNC_FMC_D10>,/* FMC_D10 */
<STM32F746_PE12_FUNC_FMC_D9>, /* FMC_D9 */
<STM32F746_PE11_FUNC_FMC_D8>, /* FMC_D8 */
<STM32F746_PE10_FUNC_FMC_D7>, /* FMC_D7 */
<STM32F746_PE9_FUNC_FMC_D6>, /* FMC_D6 */
<STM32F746_PE8_FUNC_FMC_D5>, /* FMC_D5*/
<STM32F746_PE7_FUNC_FMC_D4>, /* FMC_D4 */
<STM32F746_PD1_FUNC_FMC_D3>, /* FMC_D3 */
<STM32F746_PD0_FUNC_FMC_D2>, /* FMC_D2 */
<STM32F746_PD15_FUNC_FMC_D1>, /* FMC_D1 */
<STM32F746_PD14_FUNC_FMC_D0>, /* FMC_D0 */
<STM32F746_PI5_FUNC_FMC_NBL3>, /* FMC_NBL3 */
<STM32F746_PI4_FUNC_FMC_NBL2>, /* FMC_NBL2 */
<STM32F746_PE1_FUNC_FMC_NBL1>, /* FMC_NBL1 */
<STM32F746_PE0_FUNC_FMC_NBL0>, /* FMC_NBL0 */
<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>, /* FMC_A15 FMC_BA1 */
<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>, /* FMC_A14 FMC_BA0*/
<STM32F746_PG1_FUNC_FMC_A11>, /* FMC_A11 */
<STM32F746_PG0_FUNC_FMC_A10>, /* FMC_A10 */
<STM32F746_PF15_FUNC_FMC_A9>, /* FMC_A9 */
<STM32F746_PF14_FUNC_FMC_A8>, /* FMC_A8 */
<STM32F746_PF13_FUNC_FMC_A7>, /* FMC_A7 */
<STM32F746_PF12_FUNC_FMC_A6>, /* FMC_A6 */
<STM32F746_PF5_FUNC_FMC_A5>, /* FUNC_FMC_A5 */
<STM32F746_PF4_FUNC_FMC_A4>, /* FMC_A4 */
<STM32F746_PF3_FUNC_FMC_A3>, /* FMC_A3 */
<STM32F746_PF2_FUNC_FMC_A2>, /* FMC_A2 */
<STM32F746_PF1_FUNC_FMC_A1>, /* FMC_A1 */
<STM32F746_PF0_FUNC_FMC_A0>, /* FMC_A0 */
<STM32F746_PH3_FUNC_FMC_SDNE0>,/* FMC_SDNE0 */
<STM32F746_PH5_FUNC_FMC_SDNWE>, /* FMC_SDNWE */
<STM32F746_PF11_FUNC_FMC_SDNRAS>, /* FMC_SDNRAS */
<STM32F746_PG15_FUNC_FMC_SDNCAS>, /* FMC_SDNCAS */
<STM32F746_PH2_FUNC_FMC_SDCKE0>, /* FMC_SDCKE0 */
<STM32F746_PG8_FUNC_FMC_SDCLK>; /* FMC_SDCLK */
slew-rate = <2>;
};
};
qspi_pins: qspi@0 {
pins {
pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
<STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
<STM32F746_PF8_FUNC_QUADSPI_BK1_IO0>,
<STM32F746_PF9_FUNC_QUADSPI_BK1_IO1>,
<STM32F746_PF6_FUNC_QUADSPI_BK1_IO3>,
<STM32F746_PF7_FUNC_QUADSPI_BK1_IO2>;
slew-rate = <2>;
};
};
};
&qspi {
qflash0: n25q512a {
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <108000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
reg = <0>;
};
};

142
arch/arm/dts/stm32746g-eval.dts
View File

@ -53,7 +53,6 @@
compatible = "st,stm32f746g-eval", "st,stm32f746";
chosen {
bootargs = "root=/dev/mmcblk0p1 rw rootwait";
stdout-path = "serial0:115200n8";
};
@ -63,30 +62,6 @@
aliases {
serial0 = &usart1;
spi0 = &qspi;
mmc0 = &sdio;
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
};
led1 {
compatible = "st,led1";
led-gpio = <&gpiof 10 0>;
};
button1 {
compatible = "st,button1";
button-gpio = <&gpioc 13 0>;
};
};
@ -97,7 +72,7 @@
&pinctrl {
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
bias-disable;
drive-push-pull;
slew-rate = <2>;
@ -107,88 +82,6 @@
bias-disable;
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F746_PA2_FUNC_ETH_MDIO>,
<STM32F746_PC1_FUNC_ETH_MDC>,
<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
slew-rate = <2>;
};
};
fmc_pins: fmc@0 {
pins {
pinmux = <STM32F746_PI10_FUNC_FMC_D31>, /* FMC_D31 */
<STM32F746_PI9_FUNC_FMC_D30>, /* FMC_D30*/
<STM32F746_PI7_FUNC_FMC_D29>, /* FMC_D29 */
<STM32F746_PI6_FUNC_FMC_D28>, /* FMC_D28 */
<STM32F746_PI3_FUNC_FMC_D27>, /* FMC_D27 */
<STM32F746_PI2_FUNC_FMC_D26>, /* FMC_D26 */
<STM32F746_PI1_FUNC_FMC_D25>, /* FMC_D25 */
<STM32F746_PI0_FUNC_FMC_D24>, /* FMC_D24 */
<STM32F746_PH15_FUNC_FMC_D23>, /* FMC_D23 */
<STM32F746_PH14_FUNC_FMC_D22>, /* FMC_D22 */
<STM32F746_PH13_FUNC_FMC_D21>, /* FMC_D21 */
<STM32F746_PH12_FUNC_FMC_D20>, /* FMC_D20 */
<STM32F746_PH11_FUNC_FMC_D19>, /* FMC_D19 */
<STM32F746_PH10_FUNC_FMC_D18>, /* FMC_D18 */
<STM32F746_PH9_FUNC_FMC_D17>, /* FMC_D17 */
<STM32F746_PH8_FUNC_FMC_D16>, /* FMC_D16 */
<STM32F746_PD10_FUNC_FMC_D15>, /* FMC_D15 */
<STM32F746_PD9_FUNC_FMC_D14>, /* FMC_D14*/
<STM32F746_PD8_FUNC_FMC_D13>, /* FMC_D13 */
<STM32F746_PE15_FUNC_FMC_D12>,/* FMC_D12 */
<STM32F746_PE14_FUNC_FMC_D11>,/* FMC_D11 */
<STM32F746_PE13_FUNC_FMC_D10>,/* FMC_D10 */
<STM32F746_PE12_FUNC_FMC_D9>, /* FMC_D9 */
<STM32F746_PE11_FUNC_FMC_D8>, /* FMC_D8 */
<STM32F746_PE10_FUNC_FMC_D7>, /* FMC_D7 */
<STM32F746_PE9_FUNC_FMC_D6>, /* FMC_D6 */
<STM32F746_PE8_FUNC_FMC_D5>, /* FMC_D5*/
<STM32F746_PE7_FUNC_FMC_D4>, /* FMC_D4 */
<STM32F746_PD1_FUNC_FMC_D3>, /* FMC_D3 */
<STM32F746_PD0_FUNC_FMC_D2>, /* FMC_D2 */
<STM32F746_PD15_FUNC_FMC_D1>, /* FMC_D1 */
<STM32F746_PD14_FUNC_FMC_D0>, /* FMC_D0 */
<STM32F746_PI5_FUNC_FMC_NBL3>, /* FMC_NBL3 */
<STM32F746_PI4_FUNC_FMC_NBL2>, /* FMC_NBL2 */
<STM32F746_PE1_FUNC_FMC_NBL1>, /* FMC_NBL1 */
<STM32F746_PE0_FUNC_FMC_NBL0>, /* FMC_NBL0 */
<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>, /* FMC_A15 FMC_BA1 */
<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>, /* FMC_A14 FMC_BA0*/
<STM32F746_PG1_FUNC_FMC_A11>, /* FMC_A11 */
<STM32F746_PG0_FUNC_FMC_A10>, /* FMC_A10 */
<STM32F746_PF15_FUNC_FMC_A9>, /* FMC_A9 */
<STM32F746_PF14_FUNC_FMC_A8>, /* FMC_A8 */
<STM32F746_PF13_FUNC_FMC_A7>, /* FMC_A7 */
<STM32F746_PF12_FUNC_FMC_A6>, /* FMC_A6 */
<STM32F746_PF5_FUNC_FMC_A5>, /* FUNC_FMC_A5 */
<STM32F746_PF4_FUNC_FMC_A4>, /* FMC_A4 */
<STM32F746_PF3_FUNC_FMC_A3>, /* FMC_A3 */
<STM32F746_PF2_FUNC_FMC_A2>, /* FMC_A2 */
<STM32F746_PF1_FUNC_FMC_A1>, /* FMC_A1 */
<STM32F746_PF0_FUNC_FMC_A0>, /* FMC_A0 */
<STM32F746_PH3_FUNC_FMC_SDNE0>,/* FMC_SDNE0 */
<STM32F746_PH5_FUNC_FMC_SDNWE>, /* FMC_SDNWE */
<STM32F746_PF11_FUNC_FMC_SDNRAS>, /* FMC_SDNRAS */
<STM32F746_PG15_FUNC_FMC_SDNCAS>, /* FMC_SDNCAS */
<STM32F746_PH2_FUNC_FMC_SDCKE0>, /* FMC_SDCKE0 */
<STM32F746_PG8_FUNC_FMC_SDCLK>; /* FMC_SDCLK */
slew-rate = <2>;
};
};
};
&usart1 {
@ -197,39 +90,6 @@
status = "okay";
};
&mac {
status = "okay";
pinctrl-0 = <&ethernet_mii>;
phy-mode = "rmii";
phy-handle = <&phy0>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
&fmc {
pinctrl-0 = <&fmc_pins>;
pinctrl-names = "default";
status = "okay";
/*
* Memory configuration from sdram datasheet IS42S32800G-6BLI
*/
bank1: bank@0 {
st,sdram-control = /bits/ 8 <NO_COL_9 NO_ROW_12 MWIDTH_32 BANKS_4
CAS_2 SDCLK_3 RD_BURST_EN RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_1 TXSR_1 TRAS_1 TRC_6 TRP_2
TWR_1 TRCD_1>;
st,sdram-refcount = <1539>;
};
};
&sdio {
status = "okay";
pinctrl-names = "default", "opendrain";

145
arch/arm/dts/stm32f7-u-boot.dtsi
View File

@ -1,12 +1,132 @@
// SPDX-License-Identifier: GPL-2.0+
/{
soc {
timer5: timer@40000c00 {
u-boot,dm-pre-reloc;
fmc: fmc@A0000000 {
compatible = "st,stm32-fmc";
reg = <0xA0000000 0x1000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
pinctrl-0 = <&fmc_pins>;
pinctrl-names = "default";
status = "okay";
u-boot,dm-pre-reloc;
};
mac: ethernet@40028000 {
compatible = "st,stm32-dwmac";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(ETHMAC)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACTX)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACRX)>;
interrupts = <61>, <62>;
interrupt-names = "macirq", "eth_wake_irq";
snps,pbl = <8>;
snps,mixed-burst;
dma-ranges;
pinctrl-0 = <&ethernet_mii>;
phy-mode = "rmii";
phy-handle = <&phy0>;
status = "okay";
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
qspi: quadspi@A0001000 {
compatible = "st,stm32-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <92>;
spi-max-frequency = <108000000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>;
resets = <&rcc STM32F7_AHB3_RESET(QSPI)>;
pinctrl-0 = <&qspi_pins>;
status = "okay";
};
};
};
&clk_hse {
u-boot,dm-pre-reloc;
};
&gpioa {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiob {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioc {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiod {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioe {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiof {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpiog {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioh {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioi {
compatible = "st,stm32-gpio";
u-boot,dm-pre-reloc;
};
&gpioj {
compatible = "st,stm32-gpio";
};
&gpiok {
compatible = "st,stm32-gpio";
};
&pinctrl {
u-boot,dm-pre-reloc;
fmc_pins: fmc@0 {
u-boot,dm-pre-reloc;
pins
{
u-boot,dm-pre-reloc;
};
};
usart1_pins_a: usart1@0 {
u-boot,dm-pre-reloc;
pins1 {
@ -16,25 +136,20 @@
u-boot,dm-pre-reloc;
};
};
fmc_pins: fmc@0 {
u-boot,dm-pre-reloc;
pins
{
u-boot,dm-pre-reloc;
};
};
};
&fmc {
bank1: bank@0 {
u-boot,dm-pre-reloc;
};
};
&pwrcfg {
u-boot,dm-pre-reloc;
};
&clk_hse {
&rcc {
u-boot,dm-pre-reloc;
};
&timer5 {
u-boot,dm-pre-reloc;
};
&usart1 {
u-boot,dm-pre-reloc;
};

251
arch/arm/dts/stm32f746-disco-u-boot.dtsi Normal file
View File

@ -0,0 +1,251 @@
// SPDX-License-Identifier: GPL-2.0+
#include <stm32f7-u-boot.dtsi>
/{
chosen {
bootargs = "root=/dev/ram rdinit=/linuxrc";
};
aliases {
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
mmc0 = &sdio;
spi0 = &qspi;
};
backlight: backlight {
compatible = "gpio-backlight";
gpios = <&gpiok 3 0>;
status = "okay";
};
button1 {
compatible = "st,button1";
button-gpio = <&gpioi 11 0>;
};
led1 {
compatible = "st,led1";
led-gpio = <&gpioi 1 0>;
};
panel-rgb@0 {
compatible = "simple-panel";
backlight = <&backlight>;
enable-gpios = <&gpioi 12 0>;
status = "okay";
display-timings {
timing@0 {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hfront-porch = <2>;
hback-porch = <2>;
hsync-len = <41>;
vfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <1>;
};
};
};
soc {
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
pinctrl-0 = <&ltdc_pins>;
status = "okay";
u-boot,dm-pre-reloc;
};
};
};
&clk_hse {
u-boot,dm-pre-reloc;
};
&fmc {
/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
bank1: bank@0 {
u-boot,dm-pre-reloc;
st,sdram-control = /bits/ 8 <NO_COL_8
NO_ROW_12
MWIDTH_16
BANKS_4
CAS_3
SDCLK_2
RD_BURST_EN
RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_2
TXSR_6
TRAS_4
TRC_6
TWR_2
TRP_2
TRCD_2>;
/* refcount = (64msec/total_row_sdram)*freq - 20 */
st,sdram-refcount = < 1542 >;
};
};
&pinctrl {
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F746_PA2_FUNC_ETH_MDIO>,
<STM32F746_PC1_FUNC_ETH_MDC>,
<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
slew-rate = <2>;
};
};
fmc_pins: fmc@0 {
u-boot,dm-pre-reloc;
pins {
u-boot,dm-pre-reloc;
pinmux = <STM32F746_PD10_FUNC_FMC_D15>,
<STM32F746_PD9_FUNC_FMC_D14>,
<STM32F746_PD8_FUNC_FMC_D13>,
<STM32F746_PE15_FUNC_FMC_D12>,
<STM32F746_PE14_FUNC_FMC_D11>,
<STM32F746_PE13_FUNC_FMC_D10>,
<STM32F746_PE12_FUNC_FMC_D9>,
<STM32F746_PE11_FUNC_FMC_D8>,
<STM32F746_PE10_FUNC_FMC_D7>,
<STM32F746_PE9_FUNC_FMC_D6>,
<STM32F746_PE8_FUNC_FMC_D5>,
<STM32F746_PE7_FUNC_FMC_D4>,
<STM32F746_PD1_FUNC_FMC_D3>,
<STM32F746_PD0_FUNC_FMC_D2>,
<STM32F746_PD15_FUNC_FMC_D1>,
<STM32F746_PD14_FUNC_FMC_D0>,
<STM32F746_PE1_FUNC_FMC_NBL1>,
<STM32F746_PE0_FUNC_FMC_NBL0>,
<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,
<STM32F746_PG1_FUNC_FMC_A11>,
<STM32F746_PG0_FUNC_FMC_A10>,
<STM32F746_PF15_FUNC_FMC_A9>,
<STM32F746_PF14_FUNC_FMC_A8>,
<STM32F746_PF13_FUNC_FMC_A7>,
<STM32F746_PF12_FUNC_FMC_A6>,
<STM32F746_PF5_FUNC_FMC_A5>,
<STM32F746_PF4_FUNC_FMC_A4>,
<STM32F746_PF3_FUNC_FMC_A3>,
<STM32F746_PF2_FUNC_FMC_A2>,
<STM32F746_PF1_FUNC_FMC_A1>,
<STM32F746_PF0_FUNC_FMC_A0>,
<STM32F746_PH3_FUNC_FMC_SDNE0>,
<STM32F746_PH5_FUNC_FMC_SDNWE>,
<STM32F746_PF11_FUNC_FMC_SDNRAS>,
<STM32F746_PG15_FUNC_FMC_SDNCAS>,
<STM32F746_PC3_FUNC_FMC_SDCKE0>,
<STM32F746_PG8_FUNC_FMC_SDCLK>;
slew-rate = <2>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32F746_PE4_FUNC_LCD_B0>,
<STM32F746_PG12_FUNC_LCD_B4>,
<STM32F746_PI9_FUNC_LCD_VSYNC>,
<STM32F746_PI10_FUNC_LCD_HSYNC>,
<STM32F746_PI14_FUNC_LCD_CLK>,
<STM32F746_PI15_FUNC_LCD_R0>,
<STM32F746_PJ0_FUNC_LCD_R1>,
<STM32F746_PJ1_FUNC_LCD_R2>,
<STM32F746_PJ2_FUNC_LCD_R3>,
<STM32F746_PJ3_FUNC_LCD_R4>,
<STM32F746_PJ4_FUNC_LCD_R5>,
<STM32F746_PJ5_FUNC_LCD_R6>,
<STM32F746_PJ6_FUNC_LCD_R7>,
<STM32F746_PJ7_FUNC_LCD_G0>,
<STM32F746_PJ8_FUNC_LCD_G1>,
<STM32F746_PJ9_FUNC_LCD_G2>,
<STM32F746_PJ10_FUNC_LCD_G3>,
<STM32F746_PJ11_FUNC_LCD_G4>,
<STM32F746_PJ13_FUNC_LCD_B1>,
<STM32F746_PJ14_FUNC_LCD_B2>,
<STM32F746_PJ15_FUNC_LCD_B3>,
<STM32F746_PK0_FUNC_LCD_G5>,
<STM32F746_PK1_FUNC_LCD_G6>,
<STM32F746_PK2_FUNC_LCD_G7>,
<STM32F746_PK4_FUNC_LCD_B5>,
<STM32F746_PK5_FUNC_LCD_B6>,
<STM32F746_PK6_FUNC_LCD_B7>,
<STM32F746_PK7_FUNC_LCD_DE>;
slew-rate = <2>;
};
};
qspi_pins: qspi@0 {
pins {
pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
<STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
<STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
<STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
<STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
<STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
slew-rate = <2>;
};
};
usart1_pins_a: usart1@0 {
u-boot,dm-pre-reloc;
pins1 {
u-boot,dm-pre-reloc;
};
pins2 {
u-boot,dm-pre-reloc;
};
};
};
&pwrcfg {
u-boot,dm-pre-reloc;
};
&qspi {
qflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a13", "jedec,spi-nor";
spi-max-frequency = <108000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
memory-map = <0x90000000 0x1000000>;
reg = <0>;
};
};
&timer5 {
u-boot,dm-pre-reloc;
};

217
arch/arm/dts/stm32f746-disco.dts
View File

@ -65,62 +65,8 @@
aliases {
serial0 = &usart1;
spi0 = &qspi;
mmc0 = &sdio;
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
};
led1 {
compatible = "st,led1";
led-gpio = <&gpioi 1 0>;
};
button1 {
compatible = "st,button1";
button-gpio = <&gpioi 11 0>;
};
backlight: backlight {
compatible = "gpio-backlight";
gpios = <&gpiok 3 0>;
status = "okay";
};
panel-rgb@0 {
compatible = "simple-panel";
backlight = <&backlight>;
enable-gpios = <&gpioi 12 0>;
status = "okay";
display-timings {
timing@0 {
clock-frequency = <9000000>;
hactive = <480>;
vactive = <272>;
hfront-porch = <2>;
hback-porch = <2>;
hsync-len = <41>;
vfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <1>;
};
};
};
};
&clk_hse {
@ -140,115 +86,6 @@
bias-disable;
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F746_PA2_FUNC_ETH_MDIO>,
<STM32F746_PC1_FUNC_ETH_MDC>,
<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
slew-rate = <2>;
};
};
qspi_pins: qspi@0 {
pins {
pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
<STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
<STM32F746_PD11_FUNC_QUADSPI_BK1_IO0>,
<STM32F746_PD12_FUNC_QUADSPI_BK1_IO1>,
<STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
<STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
slew-rate = <2>;
};
};
fmc_pins: fmc@0 {
pins {
pinmux = <STM32F746_PD10_FUNC_FMC_D15>,
<STM32F746_PD9_FUNC_FMC_D14>,
<STM32F746_PD8_FUNC_FMC_D13>,
<STM32F746_PE15_FUNC_FMC_D12>,
<STM32F746_PE14_FUNC_FMC_D11>,
<STM32F746_PE13_FUNC_FMC_D10>,
<STM32F746_PE12_FUNC_FMC_D9>,
<STM32F746_PE11_FUNC_FMC_D8>,
<STM32F746_PE10_FUNC_FMC_D7>,
<STM32F746_PE9_FUNC_FMC_D6>,
<STM32F746_PE8_FUNC_FMC_D5>,
<STM32F746_PE7_FUNC_FMC_D4>,
<STM32F746_PD1_FUNC_FMC_D3>,
<STM32F746_PD0_FUNC_FMC_D2>,
<STM32F746_PD15_FUNC_FMC_D1>,
<STM32F746_PD14_FUNC_FMC_D0>,
<STM32F746_PE1_FUNC_FMC_NBL1>,
<STM32F746_PE0_FUNC_FMC_NBL0>,
<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,
<STM32F746_PG1_FUNC_FMC_A11>,
<STM32F746_PG0_FUNC_FMC_A10>,
<STM32F746_PF15_FUNC_FMC_A9>,
<STM32F746_PF14_FUNC_FMC_A8>,
<STM32F746_PF13_FUNC_FMC_A7>,
<STM32F746_PF12_FUNC_FMC_A6>,
<STM32F746_PF5_FUNC_FMC_A5>,
<STM32F746_PF4_FUNC_FMC_A4>,
<STM32F746_PF3_FUNC_FMC_A3>,
<STM32F746_PF2_FUNC_FMC_A2>,
<STM32F746_PF1_FUNC_FMC_A1>,
<STM32F746_PF0_FUNC_FMC_A0>,
<STM32F746_PH3_FUNC_FMC_SDNE0>,
<STM32F746_PH5_FUNC_FMC_SDNWE>,
<STM32F746_PF11_FUNC_FMC_SDNRAS>,
<STM32F746_PG15_FUNC_FMC_SDNCAS>,
<STM32F746_PC3_FUNC_FMC_SDCKE0>,
<STM32F746_PG8_FUNC_FMC_SDCLK>;
slew-rate = <2>;
};
};
ltdc_pins: ltdc@0 {
pins {
pinmux = <STM32F746_PE4_FUNC_LCD_B0>,
<STM32F746_PG12_FUNC_LCD_B4>,
<STM32F746_PI9_FUNC_LCD_VSYNC>,
<STM32F746_PI10_FUNC_LCD_HSYNC>,
<STM32F746_PI14_FUNC_LCD_CLK>,
<STM32F746_PI15_FUNC_LCD_R0>,
<STM32F746_PJ0_FUNC_LCD_R1>,
<STM32F746_PJ1_FUNC_LCD_R2>,
<STM32F746_PJ2_FUNC_LCD_R3>,
<STM32F746_PJ3_FUNC_LCD_R4>,
<STM32F746_PJ4_FUNC_LCD_R5>,
<STM32F746_PJ5_FUNC_LCD_R6>,
<STM32F746_PJ6_FUNC_LCD_R7>,
<STM32F746_PJ7_FUNC_LCD_G0>,
<STM32F746_PJ8_FUNC_LCD_G1>,
<STM32F746_PJ9_FUNC_LCD_G2>,
<STM32F746_PJ10_FUNC_LCD_G3>,
<STM32F746_PJ11_FUNC_LCD_G4>,
<STM32F746_PJ13_FUNC_LCD_B1>,
<STM32F746_PJ14_FUNC_LCD_B2>,
<STM32F746_PJ15_FUNC_LCD_B3>,
<STM32F746_PK0_FUNC_LCD_G5>,
<STM32F746_PK1_FUNC_LCD_G6>,
<STM32F746_PK2_FUNC_LCD_G7>,
<STM32F746_PK4_FUNC_LCD_B5>,
<STM32F746_PK5_FUNC_LCD_B6>,
<STM32F746_PK6_FUNC_LCD_B7>,
<STM32F746_PK7_FUNC_LCD_DE>;
slew-rate = <2>;
};
};
};
&usart1 {
@ -257,55 +94,6 @@
status = "okay";
};
&fmc {
pinctrl-0 = <&fmc_pins>;
pinctrl-names = "default";
status = "okay";
/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
bank1: bank@0 {
st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_16 BANKS_4
CAS_3 SDCLK_2 RD_BURST_EN
RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_2 TXSR_6 TRAS_4 TRC_6 TWR_2
TRP_2 TRCD_2>;
/* refcount = (64msec/total_row_sdram)*freq - 20 */
st,sdram-refcount = < 1542 >;
};
};
&mac {
status = "okay";
pinctrl-0 = <&ethernet_mii>;
phy-mode = "rmii";
phy-handle = <&phy0>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
&qspi {
pinctrl-0 = <&qspi_pins>;
status = "okay";
qflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a13", "jedec,spi-nor";
spi-max-frequency = <108000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
memory-map = <0x90000000 0x1000000>;
reg = <0>;
};
};
&sdio {
status = "okay";
cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
@ -315,8 +103,3 @@
bus-width = <4>;
max-frequency = <25000000>;
};
&ltdc {
status = "okay";
pinctrl-0 = <&ltdc_pins>;
};

60
arch/arm/dts/stm32f746.dtsi
View File

@ -57,51 +57,15 @@
compatible = "fixed-clock";
clock-frequency = <0>;
};
};
};
soc {
u-boot,dm-pre-reloc;
mac: ethernet@40028000 {
compatible = "st,stm32-dwmac";
reg = <0x40028000 0x8000>;
reg-names = "stmmaceth";
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(ETHMAC)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACTX)>,
<&rcc 0 STM32F7_AHB1_CLOCK(ETHMACRX)>;
interrupts = <61>, <62>;
interrupt-names = "macirq", "eth_wake_irq";
snps,pbl = <8>;
snps,mixed-burst;
dma-ranges;
status = "disabled";
};
fmc: fmc@A0000000 {
compatible = "st,stm32-fmc";
reg = <0xA0000000 0x1000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(FMC)>;
u-boot,dm-pre-reloc;
};
qspi: quadspi@A0001000 {
compatible = "st,stm32-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0xA0001000 0x1000>, <0x90000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
interrupts = <92>;
spi-max-frequency = <108000000>;
clocks = <&rcc 0 STM32F7_AHB3_CLOCK(QSPI)>;
resets = <&rcc STM32F7_AHB3_RESET(QSPI)>;
status = "disabled";
};
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(USART1)>;
status = "disabled";
u-boot,dm-pre-reloc;
};
pwrcfg: power-config@58024800 {
@ -116,7 +80,6 @@
reg = <0x40023800 0x400>;
clocks = <&clk_hse>;
st,syscfg = <&pwrcfg>;
u-boot,dm-pre-reloc;
};
pinctrl: pin-controller {
@ -124,7 +87,6 @@
#size-cells = <1>;
compatible = "st,stm32f746-pinctrl";
ranges = <0 0x40020000 0x3000>;
u-boot,dm-pre-reloc;
pins-are-numbered;
gpioa: gpio@40020000 {
@ -134,7 +96,6 @@
reg = <0x0 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOA)>;
st,bank-name = "GPIOA";
u-boot,dm-pre-reloc;
};
gpiob: gpio@40020400 {
@ -144,7 +105,6 @@
reg = <0x400 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOB)>;
st,bank-name = "GPIOB";
u-boot,dm-pre-reloc;
};
@ -155,7 +115,6 @@
reg = <0x800 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOC)>;
st,bank-name = "GPIOC";
u-boot,dm-pre-reloc;
};
gpiod: gpio@40020c00 {
@ -165,7 +124,6 @@
reg = <0xc00 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOD)>;
st,bank-name = "GPIOD";
u-boot,dm-pre-reloc;
};
gpioe: gpio@40021000 {
@ -175,7 +133,6 @@
reg = <0x1000 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOE)>;
st,bank-name = "GPIOE";
u-boot,dm-pre-reloc;
};
gpiof: gpio@40021400 {
@ -185,7 +142,6 @@
reg = <0x1400 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOF)>;
st,bank-name = "GPIOF";
u-boot,dm-pre-reloc;
};
gpiog: gpio@40021800 {
@ -195,7 +151,6 @@
reg = <0x1800 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOG)>;
st,bank-name = "GPIOG";
u-boot,dm-pre-reloc;
};
gpioh: gpio@40021c00 {
@ -205,7 +160,6 @@
reg = <0x1c00 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOH)>;
st,bank-name = "GPIOH";
u-boot,dm-pre-reloc;
};
gpioi: gpio@40022000 {
@ -215,7 +169,6 @@
reg = <0x2000 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOI)>;
st,bank-name = "GPIOI";
u-boot,dm-pre-reloc;
};
gpioj: gpio@40022400 {
@ -225,7 +178,6 @@
reg = <0x2400 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOJ)>;
st,bank-name = "GPIOJ";
u-boot,dm-pre-reloc;
};
gpiok: gpio@40022800 {
@ -235,7 +187,6 @@
reg = <0x2800 0x400>;
clocks = <&rcc 0 STM32F7_AHB1_CLOCK(GPIOK)>;
st,bank-name = "GPIOK";
u-boot,dm-pre-reloc;
};
sdio_pins: sdio_pins@0 {
@ -331,15 +282,6 @@
interrupts = <50>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
};
ltdc: display-controller@40016800 {
compatible = "st,stm32-ltdc";
reg = <0x40016800 0x200>;
resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(LTDC)>;
u-boot,dm-pre-reloc;
status = "disabled";
};
};
};

165
arch/arm/dts/stm32f769-disco-u-boot.dtsi Normal file
View File

@ -0,0 +1,165 @@
// SPDX-License-Identifier: GPL-2.0+
#include <stm32f7-u-boot.dtsi>
/{
chosen {
bootargs = "root=/dev/ram rdinit=/linuxrc";
};
aliases {
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
mmc0 = &sdio2;
spi0 = &qspi;
};
button1 {
compatible = "st,button1";
button-gpio = <&gpioa 0 0>;
};
led1 {
compatible = "st,led1";
led-gpio = <&gpioj 5 0>;
};
};
&fmc {
/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
bank1: bank@0 {
u-boot,dm-pre-reloc;
st,sdram-control = /bits/ 8 <NO_COL_8
NO_ROW_12
MWIDTH_32
BANKS_4
CAS_3
SDCLK_2
RD_BURST_EN
RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_2
TXSR_6
TRAS_4
TRC_6
TWR_2
TRP_2
TRCD_2>;
/* refcount = (64msec/total_row_sdram)*freq - 20 */
st,sdram-refcount = < 1542 >;
};
};
&pinctrl {
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F746_PA2_FUNC_ETH_MDIO>,
<STM32F746_PC1_FUNC_ETH_MDC>,
<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
slew-rate = <2>;
};
};
fmc_pins: fmc@0 {
pins {
pinmux = <STM32F746_PI10_FUNC_FMC_D31>,
<STM32F746_PI9_FUNC_FMC_D30>,
<STM32F746_PI7_FUNC_FMC_D29>,
<STM32F746_PI6_FUNC_FMC_D28>,
<STM32F746_PI3_FUNC_FMC_D27>,
<STM32F746_PI2_FUNC_FMC_D26>,
<STM32F746_PI1_FUNC_FMC_D25>,
<STM32F746_PI0_FUNC_FMC_D24>,
<STM32F746_PH15_FUNC_FMC_D23>,
<STM32F746_PH14_FUNC_FMC_D22>,
<STM32F746_PH13_FUNC_FMC_D21>,
<STM32F746_PH12_FUNC_FMC_D20>,
<STM32F746_PH11_FUNC_FMC_D19>,
<STM32F746_PH10_FUNC_FMC_D18>,
<STM32F746_PH9_FUNC_FMC_D17>,
<STM32F746_PH8_FUNC_FMC_D16>,
<STM32F746_PD10_FUNC_FMC_D15>,
<STM32F746_PD9_FUNC_FMC_D14>,
<STM32F746_PD8_FUNC_FMC_D13>,
<STM32F746_PE15_FUNC_FMC_D12>,
<STM32F746_PE14_FUNC_FMC_D11>,
<STM32F746_PE13_FUNC_FMC_D10>,
<STM32F746_PE12_FUNC_FMC_D9>,
<STM32F746_PE11_FUNC_FMC_D8>,
<STM32F746_PE10_FUNC_FMC_D7>,
<STM32F746_PE9_FUNC_FMC_D6>,
<STM32F746_PE8_FUNC_FMC_D5>,
<STM32F746_PE7_FUNC_FMC_D4>,
<STM32F746_PD1_FUNC_FMC_D3>,
<STM32F746_PD0_FUNC_FMC_D2>,
<STM32F746_PD15_FUNC_FMC_D1>,
<STM32F746_PD14_FUNC_FMC_D0>,
<STM32F746_PI5_FUNC_FMC_NBL3>,
<STM32F746_PI4_FUNC_FMC_NBL2>,
<STM32F746_PE1_FUNC_FMC_NBL1>,
<STM32F746_PE0_FUNC_FMC_NBL0>,
<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,
<STM32F746_PG1_FUNC_FMC_A11>,
<STM32F746_PG0_FUNC_FMC_A10>,
<STM32F746_PF15_FUNC_FMC_A9>,
<STM32F746_PF14_FUNC_FMC_A8>,
<STM32F746_PF13_FUNC_FMC_A7>,
<STM32F746_PF12_FUNC_FMC_A6>,
<STM32F746_PF5_FUNC_FMC_A5>,
<STM32F746_PF4_FUNC_FMC_A4>,
<STM32F746_PF3_FUNC_FMC_A3>,
<STM32F746_PF2_FUNC_FMC_A2>,
<STM32F746_PF1_FUNC_FMC_A1>,
<STM32F746_PF0_FUNC_FMC_A0>,
<STM32F746_PH3_FUNC_FMC_SDNE0>,
<STM32F746_PH5_FUNC_FMC_SDNWE>,
<STM32F746_PF11_FUNC_FMC_SDNRAS>,
<STM32F746_PG15_FUNC_FMC_SDNCAS>,
<STM32F746_PH2_FUNC_FMC_SDCKE0>,
<STM32F746_PG8_FUNC_FMC_SDCLK>;
slew-rate = <2>;
};
};
qspi_pins: qspi@0 {
pins {
pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
<STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
<STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>,
<STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>,
<STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
<STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
slew-rate = <2>;
};
};
};
&qspi {
flash0: mx66l51235l {
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <108000000>;
spi-rx-bus-width = <4>;
reg = <0>;
};
};

167
arch/arm/dts/stm32f769-disco.dts
View File

@ -50,7 +50,6 @@
compatible = "st,stm32f769-disco", "st,stm32f7";
chosen {
bootargs = "root=/dev/ram rdinit=/linuxrc";
stdout-path = "serial0:115200n8";
};
@ -60,30 +59,6 @@
aliases {
serial0 = &usart1;
spi0 = &qspi;
mmc0 = &sdio2;
/* Aliases for gpios so as to use sequence */
gpio0 = &gpioa;
gpio1 = &gpiob;
gpio2 = &gpioc;
gpio3 = &gpiod;
gpio4 = &gpioe;
gpio5 = &gpiof;
gpio6 = &gpiog;
gpio7 = &gpioh;
gpio8 = &gpioi;
gpio9 = &gpioj;
gpio10 = &gpiok;
};
led1 {
compatible = "st,led1";
led-gpio = <&gpioj 5 0>;
};
button1 {
compatible = "st,button1";
button-gpio = <&gpioa 0 0>;
};
};
@ -105,99 +80,6 @@
};
};
ethernet_mii: mii@0 {
pins {
pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
<STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
<STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
<STM32F746_PA2_FUNC_ETH_MDIO>,
<STM32F746_PC1_FUNC_ETH_MDC>,
<STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
<STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
<STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
<STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
slew-rate = <2>;
};
};
qspi_pins: qspi@0 {
pins {
pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
<STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
<STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>,
<STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>,
<STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
<STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
slew-rate = <2>;
};
};
fmc_pins: fmc@0 {
pins {
pinmux = <STM32F746_PI10_FUNC_FMC_D31>,
<STM32F746_PI9_FUNC_FMC_D30>,
<STM32F746_PI7_FUNC_FMC_D29>,
<STM32F746_PI6_FUNC_FMC_D28>,
<STM32F746_PI3_FUNC_FMC_D27>,
<STM32F746_PI2_FUNC_FMC_D26>,
<STM32F746_PI1_FUNC_FMC_D25>,
<STM32F746_PI0_FUNC_FMC_D24>,
<STM32F746_PH15_FUNC_FMC_D23>,
<STM32F746_PH14_FUNC_FMC_D22>,
<STM32F746_PH13_FUNC_FMC_D21>,
<STM32F746_PH12_FUNC_FMC_D20>,
<STM32F746_PH11_FUNC_FMC_D19>,
<STM32F746_PH10_FUNC_FMC_D18>,
<STM32F746_PH9_FUNC_FMC_D17>,
<STM32F746_PH8_FUNC_FMC_D16>,
<STM32F746_PD10_FUNC_FMC_D15>,
<STM32F746_PD9_FUNC_FMC_D14>,
<STM32F746_PD8_FUNC_FMC_D13>,
<STM32F746_PE15_FUNC_FMC_D12>,
<STM32F746_PE14_FUNC_FMC_D11>,
<STM32F746_PE13_FUNC_FMC_D10>,
<STM32F746_PE12_FUNC_FMC_D9>,
<STM32F746_PE11_FUNC_FMC_D8>,
<STM32F746_PE10_FUNC_FMC_D7>,
<STM32F746_PE9_FUNC_FMC_D6>,
<STM32F746_PE8_FUNC_FMC_D5>,
<STM32F746_PE7_FUNC_FMC_D4>,
<STM32F746_PD1_FUNC_FMC_D3>,
<STM32F746_PD0_FUNC_FMC_D2>,
<STM32F746_PD15_FUNC_FMC_D1>,
<STM32F746_PD14_FUNC_FMC_D0>,
<STM32F746_PI5_FUNC_FMC_NBL3>,
<STM32F746_PI4_FUNC_FMC_NBL2>,
<STM32F746_PE1_FUNC_FMC_NBL1>,
<STM32F746_PE0_FUNC_FMC_NBL0>,
<STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
<STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,
<STM32F746_PG1_FUNC_FMC_A11>,
<STM32F746_PG0_FUNC_FMC_A10>,
<STM32F746_PF15_FUNC_FMC_A9>,
<STM32F746_PF14_FUNC_FMC_A8>,
<STM32F746_PF13_FUNC_FMC_A7>,
<STM32F746_PF12_FUNC_FMC_A6>,
<STM32F746_PF5_FUNC_FMC_A5>,
<STM32F746_PF4_FUNC_FMC_A4>,
<STM32F746_PF3_FUNC_FMC_A3>,
<STM32F746_PF2_FUNC_FMC_A2>,
<STM32F746_PF1_FUNC_FMC_A1>,
<STM32F746_PF0_FUNC_FMC_A0>,
<STM32F746_PH3_FUNC_FMC_SDNE0>,
<STM32F746_PH5_FUNC_FMC_SDNWE>,
<STM32F746_PF11_FUNC_FMC_SDNRAS>,
<STM32F746_PG15_FUNC_FMC_SDNCAS>,
<STM32F746_PH2_FUNC_FMC_SDCKE0>,
<STM32F746_PG8_FUNC_FMC_SDCLK>;
slew-rate = <2>;
};
};
};
&usart1 {
@ -206,55 +88,6 @@
status = "okay";
};
&fmc {
pinctrl-0 = <&fmc_pins>;
pinctrl-names = "default";
status = "okay";
/* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
bank1: bank@0 {
st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_32 BANKS_4
CAS_3 SDCLK_2 RD_BURST_EN
RD_PIPE_DL_0>;
st,sdram-timing = /bits/ 8 <TMRD_2 TXSR_6 TRAS_4 TRC_6 TWR_2
TRP_2 TRCD_2>;
/* refcount = (64msec/total_row_sdram)*freq - 20 */
st,sdram-refcount = < 1542 >;
};
};
&mac {
status = "okay";
pinctrl-0 = <&ethernet_mii>;
phy-mode = "rmii";
phy-handle = <&phy0>;
mdio0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
};
};
};
&qspi {
pinctrl-0 = <&qspi_pins>;
status = "okay";
qflash0: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a13", "jedec,spi-nor";
spi-max-frequency = <108000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
memory-map = <0x90000000 0x1000000>;
reg = <0>;
};
};
&sdio2 {
status = "okay";
cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;