leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
06918de45d
u-boot/drivers/mtd/Kconfig

118 lines
3.4 KiB
Plaintext
Raw Normal View History

dm: implement a MTD uclass Implement a Memory Technology Device (MTD) uclass. It should include most flash drivers in the future. Though no uclass ops are defined yet, the MTD ops could be used. The NAND flash driver is based on MTD. The CFI flash and SPI flash support MTD, too. It should make sense to convert them to MTD uclass. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-07 06:20:31 +00:00
menu "MTD Support"
mtd: declare MTD_PARTITIONS symbol in Kconfig UBI selects MTD_PARTITIONS which is the symbol to compile drivers/mtd/mtdpart.c. Unfortunately, the symbol was not defined in Kconfig and this worked only with board files defining it. Fix this by adding a boolean in Kconfig so boards defined by defconfig files only will work as expected. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-08-16 15:30:18 +00:00
config MTD_PARTITIONS
bool
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
config MTD
bool "Enable MTD layer"
help
mtd: fix typos in drivers/mtd/Kconfig, drivers/mtd/renesas_rpc_hf.c Fix a typo %s/interract/interact/ Use Samsung's capitalization of their trademarks %s/onenand/OneNAND/ %s/Hyperflash/HyperFlash/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de> [trini: Add other Hyperflash cases as noted by Stefan] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-17 16:07:44 +00:00
Enable the MTD stack, necessary to interact with NAND, NOR,
SPI-NOR, SPI-NAND, OneNAND, etc.
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
config DM_MTD
dm: implement a MTD uclass Implement a Memory Technology Device (MTD) uclass. It should include most flash drivers in the future. Though no uclass ops are defined yet, the MTD ops could be used. The NAND flash driver is based on MTD. The CFI flash and SPI flash support MTD, too. It should make sense to convert them to MTD uclass. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-07 06:20:31 +00:00
bool "Enable Driver Model for MTD drivers"
depends on DM
help
Enable driver model for Memory Technology Devices (MTD), such as
flash, RAM and similar chips, often used for solid state file
systems on embedded devices.
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
config MTD_NOR_FLASH
bool "Enable parallel NOR flash support"
help
Enable support for parallel NOR flash.
configs: migrate CONFIG_SYS_MTDPARTS_RUNTIME to defconfigs Move CONFIG_SYS_MTDPARTS_RUNTIME into Kconfig done by moveconfig.py. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-26 09:28:42 +00:00
config SYS_MTDPARTS_RUNTIME
bool "Allow MTDPARTS to be configured at runtime"
depends on MTD
help
This option allows to call the function board_mtdparts_default to
dynamically build the variables mtdids and mtdparts at runtime.
Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-14 20:10:50 +00:00
config FLASH_CFI_DRIVER
bool "Enable CFI Flash driver"
help
The Common Flash Interface specification was developed by Intel,
AMD and other flash manufactures. It provides a universal method
for probing the capabilities of flash devices. If you wish to
support any device that is CFI-compliant, you need to enable this
option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
for more information on CFI.
cfi_flash: convert to driver model Convert cfi flash to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-07 06:31:08 +00:00
config CFI_FLASH
bool "Enable Driver Model for CFI Flash driver"
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
depends on DM_MTD
cfi_flash: convert to driver model Convert cfi flash to driver model. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-07 06:31:08 +00:00
help
The Common Flash Interface specification was developed by Intel,
AMD and other flash manufactures. It provides a universal method
for probing the capabilities of flash devices. If you wish to
support any device that is CFI-compliant, you need to enable this
option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
for more information on CFI.
Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-14 20:10:50 +00:00
config SYS_FLASH_USE_BUFFER_WRITE
bool "Enable buffered writes to flash"
depends on FLASH_CFI_DRIVER
help
Use buffered writes to flash.
config FLASH_CFI_MTD
bool "Enable CFI MTD driver"
depends on FLASH_CFI_DRIVER
help
This option enables the building of the cfi_mtd driver
in the drivers directory. The driver exports CFI flash
to the MTD layer.
config SYS_FLASH_PROTECTION
bool "Use hardware flash protection"
depends on FLASH_CFI_DRIVER
help
If defined, hardware flash sectors protection is used
instead of U-Boot software protection.
config SYS_FLASH_CFI
bool "Define extra elements in CFI for flash geometry"
depends on FLASH_CFI_DRIVER
help
Define if the flash driver uses extra elements in the
common flash structure for storing flash geometry.
mtd: add altera quadspi driver Add Altera Generic Quad SPI Controller support. The controller converts SPI NOR flash to parallel flash interface. So it is not like other SPI flash, but rather like CFI flash. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-09 06:56:02 +00:00
config ALTERA_QSPI
bool "Altera Generic Quad SPI Controller"
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
depends on DM_MTD
mtd: add altera quadspi driver Add Altera Generic Quad SPI Controller support. The controller converts SPI NOR flash to parallel flash interface. So it is not like other SPI flash, but rather like CFI flash. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-09 06:56:02 +00:00
help
This enables access to Altera EPCQ/EPCS flash chips using the
Altera Generic Quad SPI Controller. The controller converts SPI
NOR flash to parallel flash interface. Please find details on the
"Embedded Peripherals IP User Guide" of Altera.
drivers: mtd: add Microchip PIC32 internal non-CFI flash driver. PIC32 internal flash devices are parallel NOR flash divided into number of banks to allow erase-programming in one while fetch and execution continues on other. As the flash banks are memory mapped stored code can be executed directly from flash (XIP), also there is additional hardware logic to prefetch and cache contents to improve execution performance. These flash can also be used to store user data (like environment). Flash erase and programming are handled by on-chip NVM controller. Driver implemented driver model but MTD is not really support. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-18 13:06:08 +00:00
config FLASH_PIC32
bool "Microchip PIC32 Flash driver"
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
depends on MACH_PIC32 && DM_MTD
drivers: mtd: add Microchip PIC32 internal non-CFI flash driver. PIC32 internal flash devices are parallel NOR flash divided into number of banks to allow erase-programming in one while fetch and execution continues on other. As the flash banks are memory mapped stored code can be executed directly from flash (XIP), also there is additional hardware logic to prefetch and cache contents to improve execution performance. These flash can also be used to store user data (like environment). Flash erase and programming are handled by on-chip NVM controller. Driver implemented driver model but MTD is not really support. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-03-18 13:06:08 +00:00
help
This enables access to Microchip PIC32 internal non-CFI flash
chips through PIC32 Non-Volatile-Memory Controller.
mtd: rpc: Add Renesas RPC Hyperflash driver Add driver for the RPC block in Hyperflash mode. This driver allows access to a CFI Hyperflash attached to the RPC block and does not support RPC in SPI mode. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-19 21:24:08 +00:00
config RENESAS_RPC_HF
mtd: fix typos in drivers/mtd/Kconfig, drivers/mtd/renesas_rpc_hf.c Fix a typo %s/interract/interact/ Use Samsung's capitalization of their trademarks %s/onenand/OneNAND/ %s/Hyperflash/HyperFlash/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de> [trini: Add other Hyperflash cases as noted by Stefan] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-17 16:07:44 +00:00
bool "Renesas RCar Gen3 RPC HyperFlash driver"
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
depends on RCAR_GEN3 && DM_MTD
mtd: rpc: Add Renesas RPC Hyperflash driver Add driver for the RPC block in Hyperflash mode. This driver allows access to a CFI Hyperflash attached to the RPC block and does not support RPC in SPI mode. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-19 21:24:08 +00:00
help
mtd: fix typos in drivers/mtd/Kconfig, drivers/mtd/renesas_rpc_hf.c Fix a typo %s/interract/interact/ Use Samsung's capitalization of their trademarks %s/onenand/OneNAND/ %s/Hyperflash/HyperFlash/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de> [trini: Add other Hyperflash cases as noted by Stefan] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-17 16:07:44 +00:00
This enables access to HyperFlash memory through the Renesas
mtd: rpc: Add Renesas RPC Hyperflash driver Add driver for the RPC block in Hyperflash mode. This driver allows access to a CFI Hyperflash attached to the RPC block and does not support RPC in SPI mode. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-08-19 21:24:08 +00:00
RCar Gen3 RPC controller.
mtd: Add TI HyperBus Memory Controller driver AM654/J721e has HyperBus Memory Controller that supports HyperFlash and HyperRAM devices. It provides a memory mapped interface to interact with these devices. Add a driver to support the same. Driver calibrates the controller, setups up for MMIO access and probes HyperFlash child node. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
2019-10-23 08:00:01 +00:00
config HBMC_AM654
bool "HyperBus controller driver for AM65x SoC"
depends on SYSCON
help
This is the driver for HyperBus controller on TI's AM65x and
other SoCs
mtd: denali: add Denali controller configs to Kconfig Commit 3eb3e72a3f66 (nand/denali: Adding Denali NAND driver support) introduced some new options, and some of them were documented by commit f9860cf081ef (nand/denali: Document CONFIG symbols). This commit allows users to enable/disable them via Kconfig with more detailed help docs. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Chin Liang See <clsee@altera.com> Cc: Scott Wood <scottwood@freescale.com>
2014-10-03 10:21:03 +00:00
source "drivers/mtd/nand/Kconfig"
dm: Expand and complete Kconfig in drivers/ Expand the help messages for each driver. Add missing Kconfig for I2C, SPI flash and thermal. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-02-06 04:41:35 +00:00
source "drivers/mtd/spi/Kconfig"
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
source "drivers/mtd/ubi/Kconfig"
mtd: move all flash categories inside MTD submenu There is no reason to have NAND, SPI flashes and UBI sections outside of the MTD submenu in Kconfig. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-08-16 15:30:06 +00:00
endmenu
Reference in New Issue Copy Permalink