leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
u-boot/configs/xilinx_versal_net_virt_defconfig

135 lines
3.1 KiB
Plaintext
Raw Permalink Normal View History

arm64: versal-net: Add defconfig for Versal NET Use one defconfig for supporting multiple different platforms. DTB reselection is enabled to choose DT based on SOC detection. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/82cc7c1ca8850270cc2ebc992d835a37aa3d236f.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:09 +00:00
CONFIG_ARM=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
CONFIG_ARCH_VERSAL_NET=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0x8000000
arm64: versal-net: Add defconfig for Versal NET Use one defconfig for supporting multiple different platforms. DTB reselection is enabled to choose DT based on SOC detection. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/82cc7c1ca8850270cc2ebc992d835a37aa3d236f.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:09 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x100000
CONFIG_DEFAULT_DEVICE_TREE="xilinx-versal-net-virt"
CONFIG_SYS_PROMPT="Versal NET> "
CONFIG_CMD_FRU=y
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x00001000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTDELAY=5
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CLOCKS=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2073
CONFIG_SYS_BOOTM_LEN=0x6400000
CONFIG_CMD_BOOTMENU=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_NVEDIT_EFI=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
CONFIG_CMD_DM=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_USB=y
CONFIG_BOOTP_MAY_FAIL=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EFIDEBUG=y
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_SQUASHFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_CMD_UBI=y
CONFIG_PARTITION_TYPE_GUID=y
CONFIG_OF_BOARD=y
CONFIG_DTB_RESELECT=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_NETCONSOLE=y
CONFIG_IP_DEFRAG=y
CONFIG_SYS_FAULT_ECHO_LINK_DOWN=y
CONFIG_TFTP_BLOCKSIZE=4096
CONFIG_CLK_VERSAL=y
CONFIG_DFU_RAM=y
CONFIG_ZYNQ_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_DM_MAILBOX=y
CONFIG_ZYNQMP_IPI=y
CONFIG_MISC=y
CONFIG_I2C_EEPROM=y
CONFIG_SYS_I2C_EEPROM_ADDR=0x0
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_ISSI=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
arm64: versal-net: Enable defconfig for Micron octal flashes Micron mt35 series octal flashes are under config option CONFIG_SPI_FLASH_MT35XU. Enable it in default defconfig for octal flashes to be detected. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/dfaf73a72c7b408f1b8530f411c405d3dcf9f854.1669717110.git.michal.simek@amd.com
2022-11-29 10:18:31 +00:00
CONFIG_SPI_FLASH_MT35XU=y
arm64: versal-net: Add defconfig for Versal NET Use one defconfig for supporting multiple different platforms. DTB reselection is enabled to choose DT based on SOC detection. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/82cc7c1ca8850270cc2ebc992d835a37aa3d236f.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:09 +00:00
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI_DP83867=y
CONFIG_PHY_VITESSE=y
CONFIG_PHY_FIXED=y
CONFIG_DM_ETH_PHY=y
CONFIG_PHY_GIGE=y
CONFIG_XILINX_AXIEMAC=y
CONFIG_ZYNQ_GEM=y
CONFIG_POWER_DOMAIN=y
CONFIG_ZYNQMP_POWER_DOMAIN=y
CONFIG_DM_RESET=y
CONFIG_RESET_ZYNQMP=y
CONFIG_ARM_DCC=y
CONFIG_PL01X_SERIAL=y
CONFIG_XILINX_UARTLITE=y
soc: xilinx: versal-net: Add soc_xilinx_versal_net driver Add soc_xilinx_versal_net driver to identify the family & revision of versal-net SoC. Add Kconfig option CONFIG_SOC_XILINX_VERSAL_NET to enable/disable this driver. To enable this driver by default, add this config to xilinx_versal_net_virt_defconfig file. This driver will be probed using platdata U_BOOT_DEVICE structure which is specified in mach-versal-net/cpu.c. Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/613d6bcffd9070f62cf348079ed16c120f8fc56f.1668612993.git.michal.simek@amd.com
2022-11-16 15:36:35 +00:00
CONFIG_SOC_DEVICE=y
CONFIG_SOC_XILINX_VERSAL_NET=y
arm64: versal-net: Add defconfig for Versal NET Use one defconfig for supporting multiple different platforms. DTB reselection is enabled to choose DT based on SOC detection. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/82cc7c1ca8850270cc2ebc992d835a37aa3d236f.1663589964.git.michal.simek@amd.com
2022-09-19 12:21:09 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_CADENCE_OSPI_VERSAL=y
CONFIG_ZYNQ_SPI=y
CONFIG_ZYNQMP_GQSPI=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03FD
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_USB_FUNCTION_THOR=y
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in New Issue Copy Permalink