leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
master
u-boot/configs/octeon_nic23_defconfig

86 lines
1.9 KiB
Plaintext
Raw Permalink Normal View History

mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_MIPS=y
Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASE The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
2022-10-21 00:22:39 +00:00
CONFIG_TEXT_BASE=0xffffffff80000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-01 12:19:22 +00:00
CONFIG_SYS_MALLOC_LEN=0x1000000
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xe000
CONFIG_ENV_SECT_SIZE=0x100
CONFIG_DEBUG_UART_BASE=0x8001180000000800
CONFIG_DEBUG_UART_CLOCK=800000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-08 17:36:51 +00:00
CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
CONFIG_ENV_ADDR=0xe000
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_ARCH_OCTEON=y
CONFIG_TARGET_OCTEON_NIC23=y
# CONFIG_MIPS_CACHE_SETUP is not set
# CONFIG_MIPS_CACHE_DISABLE is not set
mips: octeon: nic23: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the NIC23. Additionally board specific setup is done, mostly GPIOs related to SFP / GPIO configuration. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big Using ethernet-mac-nexus@11800e2000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.247 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 9.7 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:54 +00:00
CONFIG_MIPS_RELOCATION_TABLE_SIZE=0xc000
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
# CONFIG_SYS_DEVICE_NULLDEV is not set
mips: octeon_nic23: Add PCIe FLR fixup via cyclic infrastructure This patch adds a fixup function related to a PCIe FLR (Function Level Reset) problem on the NIC23 PCIe board. This function is imported from the Marvell Octeon 2013 U-Boot version as a (nearly) verbatim copy. It uses the newly introduced cyclic infrastructure, so that this function gets called every 100us, which is needed to detect this FLR issue. Signed-off-by: Aaron Williams <awilliams@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de>
2022-09-02 11:57:52 +00:00
CONFIG_CYCLIC=y
CONFIG_CYCLIC_MAX_CPU_TIME_US=5000
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_ARCH_MISC_INIT=y
mips: octeon: nic23: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the NIC23. Additionally board specific setup is done, mostly GPIOs related to SFP / GPIO configuration. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big Using ethernet-mac-nexus@11800e2000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.247 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 9.7 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:54 +00:00
CONFIG_BOARD_EARLY_INIT_F=y
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_BOARD_LATE_INIT=y
mips: octeon: nic23: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the NIC23. Additionally board specific setup is done, mostly GPIOs related to SFP / GPIO configuration. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big Using ethernet-mac-nexus@11800e2000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.247 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 9.7 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:54 +00:00
CONFIG_LAST_STAGE_INIT=y
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_HUSH_PARSER=y
Convert CONFIG_SYS_CBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_CBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 22:01:06 +00:00
CONFIG_SYS_CBSIZE=256
Convert CONFIG_SYS_PBSIZE to Kconfig This converts the following to Kconfig: CONFIG_SYS_PBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-05-11 21:38:09 +00:00
CONFIG_SYS_PBSIZE=276
Convert CONFIG_SYS_BOOTM_LEN to Kconfig This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-25 23:29:46 +00:00
CONFIG_SYS_BOOTM_LEN=0x4000000
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
mips: octeon: nic23: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the NIC23. Additionally board specific setup is done, mostly GPIOs related to SFP / GPIO configuration. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big Using ethernet-mac-nexus@11800e2000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.247 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 9.7 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:54 +00:00
CONFIG_TFTP_TSIZE=y
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_SATA=y
CONFIG_AHCI_MVEBU=y
Convert CONFIG_LBA48 et al to Kconfig This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-11 02:59:28 +00:00
CONFIG_LBA48=y
CONFIG_SYS_64BIT_LBA=y
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_CLK=y
# CONFIG_INPUT is not set
CONFIG_MISC=y
CONFIG_MMC=y
CONFIG_MMC_OCTEONTX=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
mips: octeon: nic23: Enable ethernet support This patch enables the Kconfig symbols needed for full ethernet support on the NIC23. Additionally board specific setup is done, mostly GPIOs related to SFP / GPIO configuration. With this, ethernet can be used on this board. Here an example of a tftp load: => tftp ffffffff81000000 big Using ethernet-mac-nexus@11800e2000000 device TFTP from server 192.168.1.5; our IP address is 192.168.1.247 Filename 'big'. Load address: 0xffffffff81000000 Loading: ################################################## 10 MiB 9.7 MiB/s done Bytes transferred = 10485760 (a00000 hex) Signed-off-by: Stefan Roese <sr@denx.de>
2022-04-07 07:11:54 +00:00
CONFIG_PHYLIB=y
CONFIG_PHYLIB_10G=y
CONFIG_DM_MDIO=y
CONFIG_DM_ETH_PHY=y
CONFIG_NET_OCTEON=y
mips: octeon: Add Octeon III NIC23 board support This patch adds the basic support for the PCIe target board equipped with the Octeon III CN2350 SoC. Signed-off-by: Stefan Roese <sr@denx.de>
2021-04-07 07:12:38 +00:00
CONFIG_PCI=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_RAM=y
CONFIG_RAM_OCTEON=y
CONFIG_RAM_OCTEON_DDR4=y
CONFIG_SCSI=y
CONFIG_DEBUG_UART_SHIFT=3
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_SYS_NS16550=y
CONFIG_OCTEON_SERIAL_BOOTCMD=y
CONFIG_OCTEON_SERIAL_PCIE_CONSOLE=y
CONFIG_SPI=y
CONFIG_OCTEON_SPI=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_OCTEON=y
CONFIG_HEXDUMP=y
Reference in New Issue Copy Permalink