u-boot/board/k+p/kp_imx53/Kconfig

if TARGET_KP_IMX53

config SYS_BOARD
	default "kp_imx53"

config SYS_VENDOR
	default "k+p"

config SYS_SOC
	default "mx5"

config SYS_CONFIG_NAME
	default "kp_imx53"

config IMX_CONFIG
	default "board/freescale/mx53loco/imximage.cfg"

endif
arm: imx53: Add support for imx53 boards from K+P This commit adds support for DDC and HSC boards from K+P in u-boot. Console output: U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG Model: K+P iMX53 DRAM: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial Out: serial Err: serial Module EEPROM: ID: TQMa53-CB.0401 SN: 63152762 MAC: 00:0b:64:03:14:2a BBoard:40x0 Rev:10 Net: eth0: ethernet@63fec000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de> 2018-04-26 13:07:18 +00:00			`if TARGET_KP_IMX53`

			`config SYS_BOARD`
			`default "kp_imx53"`

			`config SYS_VENDOR`
			`default "k+p"`

			`config SYS_SOC`
			`default "mx5"`

			`config SYS_CONFIG_NAME`
			`default "kp_imx53"`

imx: Finish migration of IMX_CONFIG to Kconfig - Provide a default Kconfig value of the default script - Largely continue to define this via the board Kconfig file - For the boards that select a script based on defconfig rather than TARGET, keep this within the defconfig. Signed-off-by: Tom Rini <trini@konsulko.com> 2021-08-25 00:41:00 +00:00			`config IMX_CONFIG`
			`default "board/freescale/mx53loco/imximage.cfg"`

arm: imx53: Add support for imx53 boards from K+P This commit adds support for DDC and HSC boards from K+P in u-boot. Console output: U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200) CPU: Freescale i.MX53 rev2.1 at 800 MHz Reset cause: WDOG Model: K+P iMX53 DRAM: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from MMC... OK In: serial Out: serial Err: serial Module EEPROM: ID: TQMa53-CB.0401 SN: 63152762 MAC: 00:0b:64:03:14:2a BBoard:40x0 Rev:10 Net: eth0: ethernet@63fec000 Hit any key to stop autoboot: 0 Signed-off-by: Lukasz Majewski <lukma@denx.de> 2018-04-26 13:07:18 +00:00			`endif`