linux/drivers/iio
Mike Looijmans b2d2d2bfca iio:ad5064: Add support for ltc2633 and similar devices
The Linear Technology LTC2631, LTC2633 and LTC2635 are very similar
to the AD5064 device, in particular the LTC2627.

This patch adds support for those devices. Only the LTC2633 has been
tested, which is the 2-channel variant. The LTC2631 is the 1-channel,
and the LTC2635 the 4-channel version. The actual DAC resolution depends
on the exact chip type and can be 12, 10 or 8 bits, using the upper bits
so this has no effect on the register map. The internal reference is set
to 2.5V on "L" versions, and it's 4.096V for "H" versions.

Datasheets:
    LTC2631: http://www.linear.com/docs/26553
    LTC2633: http://www.linear.com/docs/39529
    LTC2635: http://www.linear.com/docs/28754

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-14 16:16:57 +01:00
..
accel iio: hid-sensor-accel-3d: Drop unnecessary static 2017-05-07 13:56:36 +01:00
adc iio: adc: Fix bad GENMASK use, typos, whitespace 2017-05-07 14:42:12 +01:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
chemical drivers: iio: chemical: replace comma with a semicolon 2017-03-30 19:13:23 +01:00
common iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support 2017-05-07 12:22:36 +01:00
counter iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option 2017-03-15 21:59:08 +00:00
dac iio:ad5064: Add support for ltc2633 and similar devices 2017-05-14 16:16:57 +01:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro Fourth set of IIO new device support, features and cleanups for the 4.12 cycle 2017-04-18 17:13:31 +02:00
health First set of IIO new device support, features and cleanup for the 4.12 cycle. 2017-03-06 13:17:21 +01:00
humidity iio: humidity: hts221: Remove unnecessary cast on void pointer 2017-04-02 09:50:32 +01:00
imu iio: imu: st_lsm6dsx: add system power management support 2017-04-30 17:55:15 +01:00
light iio: isl29028: add isl29030 support 2017-04-30 17:26:04 +01:00
magnetometer Merge 4.11-rc4 into staging-next 2017-03-27 09:11:25 +02:00
orientation iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support 2017-05-07 12:22:36 +01:00
potentiometer iio: max5481: Add support for Maxim digital potentiometers 2017-01-28 12:13:31 +00:00
potentiostat iio: lmp91000: Set parent device 2017-02-19 12:01:52 +00:00
pressure iio: pressure: zpa2326: report interrupted case as failure 2017-05-14 15:28:14 +01:00
proximity iio: proximity: as3935: move storm out of range check 2017-04-27 07:22:46 +01:00
temperature iio: temperature: maxim_thermocouple: add MAX31856 part 2017-05-07 12:36:41 +01:00
trigger iio: stm32 trigger: Add support for TRGO2 triggers 2017-05-07 16:08:10 +01:00
iio_core_trigger.h
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-buffer.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio: core: Fix suspicious sizeof usage 2017-04-27 06:30:52 +01:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: clean up viio_trigger_alloc() 2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: inkern: fix a static checker error 2017-04-26 06:04:06 +01:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00