.. |
include
|
|
|
aks-cdu.dts
|
|
|
am33xx-clocks.dtsi
|
ARM: dts: am33xx-clock: Fix ehrpwm tbclk data
|
2014-05-23 11:50:36 +03:00 |
am33xx.dtsi
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
|
2014-06-12 14:27:40 -07:00 |
am35xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
am43x-epos-evm.dts
|
ARM: dts: am43x-epos-evm: Add Missing cpsw-phy-sel for am43x-epos-evm
|
2014-06-16 05:02:27 -07:00 |
am43xx-clocks.dtsi
|
Merge branch 'for-v3.16/clk-dt' of https://github.com/t-kristo/linux-pm into omap-for-v3.16/dt-v2
|
2014-05-28 10:14:48 -07:00 |
am335x-base0033.dts
|
|
|
am335x-bone-common.dtsi
|
ARM: dts: AM33XX: fix ethernet and mdio default state
|
2014-05-14 14:45:15 -07:00 |
am335x-bone.dts
|
|
|
am335x-boneblack.dts
|
ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleep
|
2014-05-05 17:37:13 -07:00 |
am335x-evm.dts
|
ARM: dts: am335x-evm: Enable the McASP FIFO for audio
|
2014-07-07 04:57:17 -07:00 |
am335x-evmsk.dts
|
ARM: dts: am335x-evmsk: Enable the McASP FIFO for audio
|
2014-07-07 05:00:53 -07:00 |
am335x-igep0033.dtsi
|
ARM: dts: Fix TI CPSW Phy mode selection on IGEP COM AQUILA.
|
2014-07-07 05:01:18 -07:00 |
am335x-nano.dts
|
ARM: dts: AM33XX: fix ethernet and mdio default state
|
2014-05-14 14:45:15 -07:00 |
am437x-gp-evm.dts
|
fbdev changes for 3.16 (omap devicetree)
|
2014-06-09 18:32:13 -07:00 |
am3517_mt_ventoux.dts
|
|
|
am3517-craneboard.dts
|
ARM: dts: Add basic devices for AM3517-craneboard
|
2014-03-02 18:34:14 +01:00 |
am3517-evm.dts
|
ARM: dts: Add basic devices on am3517-evm
|
2013-12-08 14:15:46 -08:00 |
am3517.dtsi
|
ARM: dts: AM3517: Disable absent IPs inherited from OMAP3
|
2014-04-25 09:55:00 -07:00 |
am4372.dtsi
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
|
2014-06-12 14:27:40 -07:00 |
animeo_ip.dts
|
ARM: at91: Animeo IP: fix mtd partition table
|
2013-12-09 11:10:13 +01:00 |
armada-38x.dtsi
|
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
|
2014-06-24 11:33:24 +00:00 |
armada-370-db.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
armada-370-mirabox.dts
|
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
|
2014-04-26 00:34:44 +00:00 |
armada-370-netgear-rn102.dts
|
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
|
2014-04-26 00:34:44 +00:00 |
armada-370-netgear-rn104.dts
|
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
|
2014-04-26 00:34:44 +00:00 |
armada-370-rd.dts
|
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
|
2014-04-26 00:34:44 +00:00 |
armada-370-xp.dtsi
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
armada-370.dtsi
|
ARM: mvebu: switch to the new PMSU binding in Armada 370/XP Device Tree
|
2014-04-24 05:28:41 +00:00 |
armada-375-db.dts
|
ARM: dts: Specify the NAND ECC scheme explicitly on Armada 375 DB board
|
2014-06-17 17:09:43 +02:00 |
armada-375.dtsi
|
ARM: mvebu: add Device Tree description for the EHCI controllers on Armada 375
|
2014-05-16 05:53:20 +00:00 |
armada-380.dtsi
|
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
|
2014-06-24 11:33:24 +00:00 |
armada-385-db.dts
|
mvebu fixes for v3.16
|
2014-06-25 20:26:30 +02:00 |
armada-385-rd.dts
|
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
|
2014-06-24 11:33:24 +00:00 |
armada-385.dtsi
|
ARM: mvebu: Fix the improper use of the compatible string armada38x using a wildcard
|
2014-06-24 11:33:24 +00:00 |
armada-xp-axpwifiap.dts
|
ARM: mvebu: remove clock-frequency of serial port Device Tree nodes
|
2014-04-26 00:34:44 +00:00 |
armada-xp-db.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
armada-xp-gp.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
armada-xp-matrix.dts
|
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
|
2014-06-12 14:27:40 -07:00 |
armada-xp-mv78230.dtsi
|
ARM: mvebu: add enable-method property for CPUs
|
2014-04-24 05:50:14 +00:00 |
armada-xp-mv78260.dtsi
|
ARM: mvebu: add enable-method property for CPUs
|
2014-04-24 05:50:14 +00:00 |
armada-xp-mv78460.dtsi
|
ARM: mvebu: add enable-method property for CPUs
|
2014-04-24 05:50:14 +00:00 |
armada-xp-netgear-rn2120.dts
|
ARM: mvebu: don't use clocks property in UART node for Netgear RN2120
|
2014-04-26 00:34:57 +00:00 |
armada-xp-openblocks-ax3-4.dts
|
ARM: mvebu: DT: fix OpenBlocks AX3-4 RAM size
|
2014-06-17 17:09:37 +02:00 |
armada-xp.dtsi
|
ARM: mvebu: use clocks property for serial ports
|
2014-04-26 00:34:33 +00:00 |
armv7-m.dtsi
|
ARM: device trees for Energy Micro's EFM32 Cortex-M3 SoCs
|
2013-12-16 17:51:34 +01:00 |
at91-ariag25.dts
|
ARM: at91/dt: at91-ariag25: remove useless adc properties
|
2014-03-12 19:11:28 +01:00 |
at91-cosino_mega2560.dts
|
ARM: at91/dt: at91-cosino_mega2560 remove useless tsadcc node
|
2014-05-07 18:28:41 +02:00 |
at91-cosino.dtsi
|
ARM: at91/dt: at91-cosino: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
at91-foxg20.dts
|
|
|
at91-qil_a9260.dts
|
ARM: at91: switch Calao QIL-A9260 board to DT
|
2013-12-19 17:27:30 +01:00 |
at91-sama5d3_xplained.dts
|
ARM: SoC updates for 3.16 (part 1)
|
2014-06-02 16:15:12 -07:00 |
at91rm9200_pqfp.dtsi
|
|
|
at91rm9200.dtsi
|
ARM: at91/trivial: fix at91rm9200 rts/cts pinctrl definitions
|
2013-12-09 11:07:15 +01:00 |
at91rm9200ek.dts
|
ARM: at91/at91rm9200ek.dts: rearrange nodes in address ascending order
|
2013-12-09 15:08:57 +01:00 |
at91sam9g15.dtsi
|
|
|
at91sam9g15ek.dts
|
|
|
at91sam9g20.dtsi
|
|
|
at91sam9g20ek_2mmc.dts
|
|
|
at91sam9g20ek_common.dtsi
|
|
|
at91sam9g20ek.dts
|
|
|
at91sam9g25.dtsi
|
|
|
at91sam9g25ek.dts
|
|
|
at91sam9g35.dtsi
|
|
|
at91sam9g35ek.dts
|
|
|
at91sam9g45.dtsi
|
ARM: at91/dt: sam9g45: improve ADC/touchscreen support
|
2014-04-18 18:06:41 +02:00 |
at91sam9m10g45ek.dts
|
ARM: at91/dt: at91sam9m10g45ek PWM leds polarity is inversed
|
2014-04-18 18:07:54 +02:00 |
at91sam9n12.dtsi
|
ARM: at91/dt: sam9n12: correct PLLA ICPLL and OUT values
|
2014-06-25 17:50:07 +02:00 |
at91sam9n12ek.dts
|
ARM: at91/dt: define sam9n12ek crystal frequencies
|
2014-05-22 18:03:16 +02:00 |
at91sam9rl.dtsi
|
ARM: SoC updates for 3.16 (part 1)
|
2014-06-02 16:15:12 -07:00 |
at91sam9rlek.dts
|
Merge branch 'at91/cleanup' into next/dt
|
2014-05-23 23:02:30 +02:00 |
at91sam9x5_can.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_isi.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_lcd.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_macb0.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_macb1.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5_usart3.dtsi
|
ARM: at91/dt: define sam9x5 clocks
|
2014-05-22 18:03:13 +02:00 |
at91sam9x5.dtsi
|
ARM: at91: at91sam9x5: add clocks for usb device
|
2014-07-12 09:15:11 -07:00 |
at91sam9x5cm.dtsi
|
ARM: at91/dt: define sam9x5ek's crystal frequencies
|
2014-05-22 18:03:14 +02:00 |
at91sam9x5ek.dtsi
|
|
|
at91sam9x25.dtsi
|
|
|
at91sam9x25ek.dts
|
|
|
at91sam9x35.dtsi
|
|
|
at91sam9x35ek.dts
|
|
|
at91sam9260.dtsi
|
ARM: at91/dt: sam9260: correct external trigger value
|
2014-05-13 11:51:52 +02:00 |
at91sam9261.dtsi
|
ARM: at91/dt: sam9261: remove slow RC osc
|
2014-06-25 18:00:17 +02:00 |
at91sam9261ek.dts
|
ARM: at91/dt: define sam9261ek slow crystal frequency
|
2014-06-25 17:50:08 +02:00 |
at91sam9263.dtsi
|
ARM: at91/dt: sam9263: fix compatibility string for the I2C
|
2014-02-07 17:20:37 +01:00 |
at91sam9263ek.dts
|
ARM: at91: sam9263ek: add dt lcd support
|
2013-12-09 11:10:10 +01:00 |
atlas6-evb.dts
|
|
|
atlas6.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
axm55xx.dtsi
|
ARM: dts: axxia: Add reset controller
|
2014-05-23 18:18:46 +02:00 |
axm5516-amarillo.dts
|
ARM: dts: Device tree for AXM55xx.
|
2014-05-23 18:18:45 +02:00 |
axm5516-cpus.dtsi
|
ARM: dts: Device tree for AXM55xx.
|
2014-05-23 18:18:45 +02:00 |
bcm2835-rpi-b.dts
|
ARM: bcm2835: add USB controller to device tree
|
2014-01-02 12:08:03 -08:00 |
bcm2835.dtsi
|
ARM: bcm2835: fix clock DT node names
|
2014-02-24 19:40:27 -07:00 |
bcm4708-netgear-r6250.dts
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm4708.dtsi
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm5301x.dtsi
|
ARM: BCM5301X: add dts files for BCM4708 SoC
|
2014-02-19 09:15:59 -05:00 |
bcm11351.dtsi
|
ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
|
2014-04-28 11:14:38 -04:00 |
bcm21664-garnet.dts
|
ARM: dts: bcm21664: Add device tree files.
|
2014-03-14 12:22:37 -04:00 |
bcm21664.dtsi
|
ARM: dts: use real clocks for bcm21664
|
2014-04-30 11:51:45 -07:00 |
bcm28155-ap.dts
|
ARM: dts: Enable the PWM for bcm28155 AP board
|
2014-04-28 11:14:47 -04:00 |
bcm59056.dtsi
|
ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators
|
2014-05-23 08:07:01 -04:00 |
berlin2-sony-nsz-gs7.dts
|
ARM: add Armada 1500 and Sony NSZ-GS7 device tree files
|
2013-12-13 16:31:05 +01:00 |
berlin2.dtsi
|
ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
|
2014-05-19 23:02:31 +02:00 |
berlin2cd-google-chromecast.dts
|
ARM: add Armada 1500-mini and Chromecast device tree files
|
2013-12-13 16:31:06 +01:00 |
berlin2cd.dtsi
|
ARM: dts: berlin: add the pinctrl node and muxing setup for uarts
|
2014-05-19 23:02:31 +02:00 |
berlin2q-marvell-dmp.dts
|
ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP
|
2014-05-19 23:02:34 +02:00 |
berlin2q.dtsi
|
ARM: dts: berlin: add the SDHCI nodes for the BG2Q
|
2014-05-19 23:02:33 +02:00 |
da850-enbw-cmc.dts
|
|
|
da850-evm.dts
|
ARM: davinci: da850 evm: add GPIO pinumux entries DT node
|
2013-12-15 18:40:49 +05:30 |
da850.dtsi
|
ARM: davinci: da850: add GPIO DT node
|
2013-12-15 18:35:37 +05:30 |
dove-cm-a510.dts
|
|
|
dove-cubox.dts
|
|
|
dove-d2plug.dts
|
|
|
dove-d3plug.dts
|
|
|
dove-dove-db.dts
|
|
|
dove.dtsi
|
ARM: dove: drop pinctrl PMU reg property
|
2014-03-06 20:20:33 +00:00 |
dra7-evm.dts
|
ARM: dts: dra7-evm: Make VDDA_1V8_PHY supply always on
|
2014-07-07 04:57:06 -07:00 |
dra7.dtsi
|
ARM: dts: dra7-evm: remove interrupt binding
|
2014-06-17 01:22:55 -07:00 |
dra7xx-clocks.dtsi
|
Merge branch 'for-v3.16-rc/clk-dt-fixes' of https://github.com/t-kristo/linux-pm into fixes-rc4
|
2014-07-07 05:05:42 -07:00 |
dra72-evm.dts
|
ARM: dts: Add support for DRA72x family of devices
|
2014-05-06 10:20:14 -07:00 |
dra72x.dtsi
|
ARM: dts: Add support for DRA72x family of devices
|
2014-05-06 10:20:14 -07:00 |
dra74x.dtsi
|
ARM: dts: Add support for DRA72x family of devices
|
2014-05-06 10:20:14 -07:00 |
ea3250.dts
|
|
|
ecx-2000.dts
|
|
|
ecx-common.dtsi
|
|
|
efm32gg-dk3750.dts
|
ARM: efm32: properly namespace i2c location property
|
2014-03-14 16:04:30 +01:00 |
efm32gg.dtsi
|
ARM: efm32: fix unit address part in USART2 device nodes' names
|
2014-03-14 16:04:15 +01:00 |
elpida_ecb240abacn.dtsi
|
|
|
emev2-kzm9d.dts
|
ARM: shmobile: emev2: Use interrupt macros in DT files
|
2013-12-10 17:27:20 +09:00 |
emev2.dtsi
|
ARM: shmobile: emev2: Setup internal peripheral interrupts as level high
|
2013-12-10 17:27:21 +09:00 |
ethernut5.dts
|
|
|
evk-pro3.dts
|
|
|
exynos4.dtsi
|
ARM: dts: fix pwm-cells in pwm node for exynos4
|
2014-07-05 06:31:31 +09:00 |
exynos4x12-pinctrl.dtsi
|
|
|
exynos4x12.dtsi
|
ARM: dts: add exynos_usbphy node for exynos4
|
2014-05-23 03:31:32 +09:00 |
exynos5.dtsi
|
ARM: dts: update watchdog device nodes for exynos5250 and exynos5420
|
2014-02-24 08:49:50 +09:00 |
exynos3250-pinctrl.dtsi
|
ARM: dts: add dts files for exynos3250 SoC
|
2014-05-31 02:09:17 +09:00 |
exynos3250.dtsi
|
ARM: dts: add pmu sysreg node to exynos3250
|
2014-05-31 02:22:19 +09:00 |
exynos4210-origen.dts
|
ARM: dts: use key code macros on Origen and Arndale boards
|
2014-05-31 02:06:51 +09:00 |
exynos4210-pinctrl.dtsi
|
|
|
exynos4210-smdkv310.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4210-trats.dts
|
ARM: dts: Enable USB gadget functionality for exynos4210-trats
|
2014-05-23 02:34:11 +09:00 |
exynos4210-universal_c210.dts
|
ARM: dts: add external sd card node for exynos4210-universal_c210
|
2014-05-23 02:34:14 +09:00 |
exynos4210.dtsi
|
ARM: EXYNOS: Map SYSRAM through generic DT bindings
|
2014-05-15 03:30:05 +09:00 |
exynos4212.dtsi
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos4412-odroidx.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos4412-origen.dts
|
ARM: dts: use key code macros on Origen and Arndale boards
|
2014-05-31 02:06:51 +09:00 |
exynos4412-smdk4412.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4412-tiny4412.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos4412-trats2.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
exynos4412.dtsi
|
ARM: dts: add PMU syscon node for exynos4
|
2014-05-23 03:31:32 +09:00 |
exynos5250-arndale.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
exynos5250-cros-common.dtsi
|
ARM: dts: enable hdmi for exynos5250 based snow board
|
2014-05-19 22:54:48 +09:00 |
exynos5250-pinctrl.dtsi
|
ARM: dts: Add pwmX_out pinctrl nodes to exynos5250
|
2014-05-19 23:14:02 +09:00 |
exynos5250-smdk5250.dts
|
Exynos cleanup for v3.15
|
2014-03-29 02:03:39 +01:00 |
exynos5250-snow.dts
|
ARM: dts: enable dp-controller for exynos5250-snow board
|
2014-05-19 23:14:04 +09:00 |
exynos5250.dtsi
|
ARM: dts: add pmu syscon handle to exynos5250 hdmi
|
2014-05-23 02:45:42 +09:00 |
exynos5260-pinctrl.dtsi
|
ARM: dts: add dts files for exynos5260 SoC
|
2014-05-31 02:09:04 +09:00 |
exynos5260-xyref5260.dts
|
ARM: dts: add dts file for exynos5260-xyref5260 board
|
2014-05-31 02:09:10 +09:00 |
exynos5260.dtsi
|
ARM: dts: add dts files for exynos5260 SoC
|
2014-05-31 02:09:04 +09:00 |
exynos5410-smdk5410.dts
|
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
|
2014-05-31 02:09:18 +09:00 |
exynos5410.dtsi
|
ARM: dts: add dts files for exynos5410 and exynos5410-smdk5410
|
2014-05-31 02:09:18 +09:00 |
exynos5420-arndale-octa.dts
|
Samsung 3rd DT updates for v3.16
|
2014-05-30 21:21:10 -07:00 |
exynos5420-peach-pit.dts
|
ARM: dts: correct the usb phy node in exynos5420-peach-pit
|
2014-05-31 02:11:39 +09:00 |
exynos5420-pinctrl.dtsi
|
ARM: dts: Add pwmX_out pinctrl nodes to exynos5420
|
2014-05-09 06:06:10 +09:00 |
exynos5420-smdk5420.dts
|
ARM: dts: Add MFC memory banks to exynos5420 boards
|
2014-05-20 01:04:13 +09:00 |
exynos5420.dtsi
|
ARM: dts: Add clock property for mfc_pd in exynos5420
|
2014-07-11 08:04:03 +09:00 |
exynos5440-sd5v1.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos5440-ssdk5440.dts
|
ARM: dts: Update Exynos DT files with generic compatible strings
|
2014-03-21 02:17:22 +09:00 |
exynos5440.dtsi
|
ARM: dts: update watchdog node name in exynos5440
|
2014-05-31 02:06:54 +09:00 |
exynos5800-peach-pi.dts
|
ARM: dts: correct the usb phy node in exynos5800-peach-pi
|
2014-05-31 02:11:42 +09:00 |
exynos5800.dtsi
|
ARM: dts: add mfc node for exynos5800
|
2014-05-31 02:09:17 +09:00 |
ge863-pro3.dtsi
|
|
|
hi3620-hi4511.dts
|
ARM: dts: rename hi4511 dts file
|
2013-12-20 08:23:01 -08:00 |
hi3620.dtsi
|
ARM: dts: enable clock binding on Hi3620
|
2013-12-17 16:43:35 -08:00 |
highbank.dts
|
|
|
imx6dl-cubox-i.dts
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
imx6dl-dfi-fs700-m60.dts
|
ARM: dts: imx6: Add DFI FS700-M60 board support
|
2014-02-10 16:27:40 +08:00 |
imx6dl-gw51xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-gw52xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-gw53xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-gw54xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6dl-hummingboard.dts
|
ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level
|
2014-06-17 22:00:07 +08:00 |
imx6dl-nitrogen6x.dts
|
ARM: dts: imx: add nitrogen6x board
|
2014-02-09 21:29:32 +08:00 |
imx6dl-phytec-pbab01.dts
|
ARM: dts: Add Phytec pbab01 with i.MX6 DualLite/Solo
|
2014-05-16 23:01:53 +08:00 |
imx6dl-phytec-pfla02.dtsi
|
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
|
2014-05-16 23:01:52 +08:00 |
imx6dl-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
|
2014-02-09 21:29:44 +08:00 |
imx6dl-riotboard.dts
|
ARM: dts: imx6: add new board RIoTboard
|
2014-05-16 23:02:12 +08:00 |
imx6dl-sabreauto.dts
|
|
|
imx6dl-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
imx6dl-sabresd.dts
|
|
|
imx6dl-wandboard.dts
|
|
|
imx6dl.dtsi
|
ARM: dts: imx6: i2c4 cleanup
|
2014-05-16 23:02:12 +08:00 |
imx6q-arm2.dts
|
ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt.
|
2014-02-10 16:27:27 +08:00 |
imx6q-cm-fx6.dts
|
ARM: dts: Add initial support for cm-fx6.
|
2014-02-09 21:28:55 +08:00 |
imx6q-cubox-i.dts
|
ARM: imx: initial SolidRun Cubox-i support
|
2014-01-27 14:21:01 +00:00 |
imx6q-dfi-fs700-m60.dts
|
ARM: dts: imx6: Add DFI FS700-M60 board support
|
2014-02-10 16:27:40 +08:00 |
imx6q-dmo-edmqmx6.dts
|
ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
|
2014-05-16 23:02:11 +08:00 |
imx6q-gk802.dts
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6q-gw51xx.dts
|
ARM: dts: imx6: ventana: fix include typo
|
2014-06-17 21:11:19 +08:00 |
imx6q-gw52xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-gw53xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-gw54xx.dts
|
ARM: dts: add Gateworks Ventana support
|
2014-02-09 21:28:53 +08:00 |
imx6q-gw5400-a.dts
|
ARM: dts: ventana: Add HDMI support
|
2014-05-16 23:02:03 +08:00 |
imx6q-nitrogen6x.dts
|
ARM: dts: imx: add nitrogen6x board
|
2014-02-09 21:29:32 +08:00 |
imx6q-phytec-pbab01.dts
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6q-phytec-pfla02.dtsi
|
ARM: dts: Add Phytec pfla02 with i.MX6 DualLite/Solo
|
2014-05-16 23:01:52 +08:00 |
imx6q-pinfunc.h
|
ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ
|
2014-02-09 21:29:44 +08:00 |
imx6q-sabreauto.dts
|
|
|
imx6q-sabrelite.dts
|
ARM: dts: imx: sabrelite: add Dual Lite/Solo support
|
2014-02-09 21:29:16 +08:00 |
imx6q-sabresd.dts
|
ARM: dts: imx6qdl: Add IPU DI ports and endpoints, move imx-drm node to dtsi
|
2014-03-07 16:17:59 +00:00 |
imx6q-sbc6x.dts
|
ARM: dts: imx6qdl: make pinctrl nodes board specific
|
2014-02-09 21:28:56 +08:00 |
imx6q-udoo.dts
|
ARM: dts: imx6q-udoo: Add HDMI support
|
2014-05-16 23:02:07 +08:00 |
imx6q-wandboard.dts
|
|
|
imx6q.dtsi
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx6qdl-cubox-i.dtsi
|
ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level
|
2014-06-17 22:00:07 +08:00 |
imx6qdl-dfi-fs700-m60.dtsi
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6qdl-gw51xx.dtsi
|
ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix
|
2014-06-17 21:11:19 +08:00 |
imx6qdl-gw52xx.dtsi
|
ARM: dts: imx6: ventana: correct gw52xx sgtl5000 clock source
|
2014-06-17 21:11:19 +08:00 |
imx6qdl-gw53xx.dtsi
|
ARM: dts: imx6qdl-gw5xxx: Fix Linear Technology vendor prefix
|
2014-06-17 21:11:19 +08:00 |
imx6qdl-gw54xx.dtsi
|
ARM: dts: imx: add LVDS backlight for Ventana
|
2014-05-16 23:02:06 +08:00 |
imx6qdl-microsom-ar8035.dtsi
|
ARM: dt: microsom: don't set bit 7 for ethernet mux settings
|
2014-04-14 10:22:37 +08:00 |
imx6qdl-microsom.dtsi
|
ARM: dts: hummingboard/cubox-i: move usb otg configuration to platform level
|
2014-06-17 22:00:07 +08:00 |
imx6qdl-nitrogen6x.dtsi
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6qdl-phytec-pbab01.dtsi
|
ARM: dts: pbab01: Enable DVI
|
2014-05-16 23:01:56 +08:00 |
imx6qdl-phytec-pfla02.dtsi
|
ARM: dts: pfla02: Add UART1 (uart3)
|
2014-05-16 23:01:55 +08:00 |
imx6qdl-sabreauto.dtsi
|
ARM: dts: imx6qdl-sabreauto: Support debug LED
|
2014-02-20 09:38:07 +08:00 |
imx6qdl-sabrelite.dtsi
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx6qdl-sabresd.dtsi
|
ARM: dts: imx6qdl-sabresd: Add USDHC4 support
|
2014-05-16 23:02:09 +08:00 |
imx6qdl-wandboard.dtsi
|
ARM: dts: imx6qdl-wandboard: Add HDMI support
|
2014-05-16 23:02:02 +08:00 |
imx6qdl.dtsi
|
ARM: dts: imx6: update pcie to bring in line with new binding
|
2014-05-16 23:02:06 +08:00 |
imx6sl-evk.dts
|
ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11
|
2014-04-14 10:22:38 +08:00 |
imx6sl-pinfunc.h
|
|
|
imx6sl.dtsi
|
ARM: dts: imx6sl: correct the fec ipg clock source
|
2014-06-17 21:11:19 +08:00 |
imx23-evk.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23-olinuxino.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23-pinfunc.h
|
|
|
imx23-stmp378x_devb.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx23.dtsi
|
ARM: dts: mxs: add mxs phy controller id
|
2014-02-09 21:33:36 +08:00 |
imx25-eukrea-cpuimx25.dtsi
|
ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard.
|
2014-02-09 21:33:21 +08:00 |
imx25-eukrea-mbimxsd25-baseboard.dts
|
ARM: dts: mbimxsd25 baseboard: Add USB support
|
2014-04-30 13:35:20 +08:00 |
imx25-karo-tx25.dts
|
ARM: dts: Karo TX25: use hardware ecc
|
2014-05-16 23:02:11 +08:00 |
imx25-pdk.dts
|
ARM: dts: imx25-pdk: Add USB Host1 support
|
2014-05-16 23:01:44 +08:00 |
imx25-pinfunc.h
|
ARM: dts: imx25: Add pinctrl functions.
|
2014-02-09 21:32:31 +08:00 |
imx25.dtsi
|
ARM: dts: i.MX25: Add IRAM node
|
2014-05-16 23:02:10 +08:00 |
imx27-apf27.dts
|
ARM: dts: imx: add required #clock-cells for fixed-clock
|
2014-04-14 10:22:39 +08:00 |
imx27-apf27dev.dts
|
ARM: dts: imx27-apf27dev: Add pinctrl for cspi, sdhci, leds and keys
|
2014-02-09 21:33:14 +08:00 |
imx27-pdk.dts
|
ARM: dts: imx: Remove excess entries for PMIC
|
2014-05-16 23:02:04 +08:00 |
imx27-phytec-phycard-s-rdk.dts
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx27-phytec-phycard-s-som.dtsi
|
ARM: dts: imx27-phytec-phycard-s-som: Rename file to .dtsi
|
2014-02-13 09:57:32 +08:00 |
imx27-phytec-phycore-rdk.dts
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx27-phytec-phycore-som.dtsi
|
ARM: dts: imx: Remove excess entries for PMIC
|
2014-05-16 23:02:04 +08:00 |
imx27-pinfunc.h
|
ARM: dts: i.MX27: Configure GPIOs as "input" by default
|
2014-02-09 21:33:15 +08:00 |
imx27.dtsi
|
ARM: dts: imx27-pdk: Add keypad support
|
2014-05-16 23:02:01 +08:00 |
imx28-apf28.dts
|
|
|
imx28-apf28dev.dts
|
ARM: dts: imx28-apf28dev: add user button
|
2014-02-09 21:33:45 +08:00 |
imx28-apx4devkit.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx28-cfa10036.dts
|
ARM: dts: cfa10036: Add dr_mode and phy_type properties to the DT
|
2014-02-09 21:32:48 +08:00 |
imx28-cfa10037.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-cfa10049.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-cfa10055.dts
|
|
|
imx28-cfa10056.dts
|
|
|
imx28-cfa10057.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-cfa10058.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-duckbill.dts
|
ARM: dts: imx28-duckbill: use symbolic names from gpio.h
|
2014-05-16 23:01:48 +08:00 |
imx28-eukrea-mbmx28lc.dtsi
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-eukrea-mbmx283lc.dts
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-eukrea-mbmx287lc.dts
|
ARM: mxs: Add support for the eukrea-cpuimx28.
|
2014-02-09 21:33:20 +08:00 |
imx28-evk.dts
|
ARM: dts: imx28-evk: Run I2C0 at 400kHz
|
2014-02-09 21:33:00 +08:00 |
imx28-m28cu3.dts
|
ARM: dts: imx28-m28cu3: Remove 'reset-active-high'
|
2014-02-09 21:33:52 +08:00 |
imx28-m28evk.dts
|
ARM: dts: mxs: Fix the RTC compatible prop on M28EVK
|
2014-02-21 10:08:43 +08:00 |
imx28-pinfunc.h
|
|
|
imx28-sps1.dts
|
ARM: i.MX28: dts: rename usbphy pin names
|
2014-02-09 21:33:22 +08:00 |
imx28-tx28.dts
|
ARM: dts: imx28-tx28: Remove 'enable-active-low' property
|
2014-02-10 11:19:43 +08:00 |
imx28.dtsi
|
ARM: dts: imx28: include gpio.h to allow use of symbolic names
|
2014-05-16 23:01:47 +08:00 |
imx31-bug.dts
|
|
|
imx31.dtsi
|
|
|
imx35-eukrea-cpuimx35.dtsi
|
ARM: dts: cpuimx35 Add touchscreen support.
|
2014-05-16 23:01:50 +08:00 |
imx35-eukrea-mbimxsd35-baseboard.dts
|
ARM: dts: mbimxsd35 baseboard: Add USB support.
|
2014-04-30 13:35:20 +08:00 |
imx35-pdk.dts
|
ARM: dts: imx35-pdk: Fix memory region description
|
2014-05-16 23:02:13 +08:00 |
imx35-pinfunc.h
|
|
|
imx35.dtsi
|
ARM: dts: i.MX35: Add USB support.
|
2014-04-30 13:35:20 +08:00 |
imx50-evk.dts
|
ARM: dts: imx: add device tree support for Freescale imx50evk board
|
2014-02-09 21:32:21 +08:00 |
imx50-pinfunc.h
|
ARM: dts: imx: add device tree pin definitions for the IMX50
|
2014-02-09 21:32:18 +08:00 |
imx50.dtsi
|
ARM: dts: imx: Add alias for ethernet controller
|
2014-04-30 13:35:18 +08:00 |
imx51-apf51.dts
|
ARM: dts: i.MX51 boards: Switch to use standard GPIO flags definitions
|
2014-02-09 21:32:51 +08:00 |
imx51-apf51dev.dts
|
ARM: SoC: device tree changes
|
2014-04-05 15:29:04 -07:00 |
imx51-babbage.dts
|
ARM: dts: imx51-babbage: Fix esdhc setup
|
2014-06-21 15:53:54 +08:00 |
imx51-digi-connectcore-jsk.dts
|
ARM i.MX51: Add Digi ConnectCore devicetree
|
2014-05-16 23:01:51 +08:00 |
imx51-digi-connectcore-som.dtsi
|
ARM: dts: i.MX51: Allow to define partitions onto NFC
|
2014-05-16 23:01:56 +08:00 |
imx51-eukrea-cpuimx51.dtsi
|
ARM: dts: cpuimx51 Add touchscreen support.
|
2014-05-16 23:01:50 +08:00 |
imx51-eukrea-mbimxsd51-baseboard.dts
|
ARM: dts: imx51-eukrea-mbimxsd51-baseboard: unbreak esdhc.
|
2014-06-21 15:54:06 +08:00 |
imx51-pinfunc.h
|
|
|
imx51.dtsi
|
ARM: dts: i.MX51: Allow to define partitions onto NFC
|
2014-05-16 23:01:56 +08:00 |
imx53-ard.dts
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx53-m53evk.dts
|
ARM: dts: mx5: Move the display out of soc {} node
|
2014-06-21 12:39:50 +08:00 |
imx53-mba53.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
imx53-pinfunc.h
|
|
|
imx53-qsb-common.dtsi
|
ARM: dts: Add stdout-path property to i.MX boards
|
2014-05-16 23:02:07 +08:00 |
imx53-qsb.dts
|
ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi
|
2014-03-07 16:17:58 +00:00 |
imx53-qsrb.dts
|
ARM: dts: i.MX53: add support for MCIMX53-START-R
|
2014-02-09 21:33:43 +08:00 |
imx53-smd.dts
|
ARM: dts: imx53: make pinctrl nodes board specific
|
2014-02-09 21:32:25 +08:00 |
imx53-tqma53.dtsi
|
ARM: dts: imx: use generic node name for fixed regulator
|
2014-02-09 21:32:30 +08:00 |
imx53-tx53-x03x.dts
|
ARM: dts: imx53-tx53: add IPU DI ports and endpoints
|
2014-04-14 10:22:38 +08:00 |
imx53-tx53-x13x.dts
|
ARM: dts: imx53: add support for Ka-Ro TX53 modules
|
2014-02-09 21:33:48 +08:00 |
imx53-tx53.dtsi
|
ARM: dts: mx53: Remove 'enable-active-low' property
|
2014-02-10 11:19:36 +08:00 |
imx53-voipac-bsb.dts
|
ARM: dts: i.MX53: Devicetree for Voipac Baseboard using x53-dmm-668 module
|
2014-02-09 21:32:24 +08:00 |
imx53-voipac-dmm-668.dtsi
|
ARM: dts: i.MX53: dts for Voipac x53-dmm-668 module
|
2014-02-09 21:32:23 +08:00 |
imx53.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
integrator.dtsi
|
ARM: integrator: move EBI to the device tree
|
2013-12-04 16:22:31 +01:00 |
integratorap.dts
|
ARM: integrator: define clocks in the device trees
|
2014-02-13 11:20:31 +01:00 |
integratorcp.dts
|
ARM: integrator: define clocks in the device trees
|
2014-02-13 11:20:31 +01:00 |
k2e-clocks.dtsi
|
ARM: dts: keystone: add support for k2 Edison SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
k2e-evm.dts
|
ARM: dts: keystone-evm: add spi nor flash support
|
2014-05-12 11:43:59 -04:00 |
k2e.dtsi
|
ARM: dts: keystone: add support for k2 Edison SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
k2hk-clocks.dtsi
|
ARM: dts: keystone: Fix control register range for clktsip
|
2014-03-18 15:59:26 -04:00 |
k2hk-evm.dts
|
ARM: dts: keystone-evm: add spi nor flash support
|
2014-05-12 11:43:59 -04:00 |
k2hk.dtsi
|
ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
|
2014-02-26 10:06:56 -05:00 |
k2l-clocks.dtsi
|
ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
k2l-evm.dts
|
ARM: dts: keystone-evm: add spi nor flash support
|
2014-05-12 11:43:59 -04:00 |
k2l.dtsi
|
ARM: dts: keystone: add support for K2 Lamarr SoC and EVM
|
2014-02-26 10:06:56 -05:00 |
keystone-clocks.dtsi
|
ARM: dts: keystone: preparatory patch to support K2L and K2E SOCs
|
2014-02-26 10:06:56 -05:00 |
keystone.dtsi
|
ARM: SoC updates for 3.16 (part 2)
|
2014-06-11 11:03:24 -07:00 |
kirkwood-98dx4122.dtsi
|
ARM: dts: kirkwood: resynch 98dx4122 dtsi
|
2014-05-16 17:56:51 +00:00 |
kirkwood-6192.dtsi
|
ARM: dts: kirkwood: consolidate common pinctrl settings
|
2014-05-05 00:52:28 +00:00 |
kirkwood-6281.dtsi
|
ARM: dts: kirkwood: consolidate common pinctrl settings
|
2014-05-05 00:52:28 +00:00 |
kirkwood-6282.dtsi
|
ARM: dts: kirkwood: set default pinctrl for I2C1 on 6282
|
2014-05-05 00:53:24 +00:00 |
kirkwood-b3.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-cloudbox.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-db-88f6281.dts
|
|
|
kirkwood-db-88f6282.dts
|
|
|
kirkwood-db.dtsi
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-dns320.dts
|
ARM: dts: kirkwood: set default pinctrl for UART0/1
|
2014-05-05 00:52:45 +00:00 |
kirkwood-dns325.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-dnskw.dtsi
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-dockstar.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-dreamplug.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-ds109.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds110jv10.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds111.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds112.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds209.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds210.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds212.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds212j.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds409.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds409slim.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds411.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds411j.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-ds411slim.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-goflexnet.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-guruplug-server-plus.dts
|
ARM: dts: kirkwood: fix phy-connection-type for Guruplug
|
2014-06-23 21:48:16 +00:00 |
kirkwood-ib62x0.dts
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-iconnect.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-iomega_ix2_200.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-is2.dts
|
|
|
kirkwood-km_common.dtsi
|
ARM: dts: kirkwood: add kirkwood-km_common DTSI files
|
2014-05-16 17:57:19 +00:00 |
kirkwood-km_fixedeth.dts
|
ARM: dts: kirkwood: add kirkwood-km_fixedeth DTS file
|
2014-05-16 17:57:27 +00:00 |
kirkwood-km_kirkwood.dts
|
ARM: dts: kirkwood: add kirkwood-km_common DTSI files
|
2014-05-16 17:57:19 +00:00 |
kirkwood-laplug.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-lschlv2.dts
|
|
|
kirkwood-lsxhl.dts
|
|
|
kirkwood-lsxl.dtsi
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-mplcec4.dts
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-mv88f6281gtw-ge.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
kirkwood-netgear_readynas_duo_v2.dts
|
ARM: dts: kirkwood: set default pinctrl for UART0/1
|
2014-05-05 00:52:45 +00:00 |
kirkwood-netgear_readynas_nv+_v2.dts
|
ARM: dts: kirkwood: set default pinctrl for UART0/1
|
2014-05-05 00:52:45 +00:00 |
kirkwood-ns2-common.dtsi
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-ns2.dts
|
|
|
kirkwood-ns2lite.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ns2max.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-ns2mini.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-nsa3x0-common.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
kirkwood-nsa310.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-nsa310a.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-nsa320.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-openblocks_a6.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-openblocks_a7.dts
|
mvebu DT changes for v3.16
|
2014-05-19 21:55:03 -07:00 |
kirkwood-openrd-base.dts
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-openrd-client.dts
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-openrd-ultimate.dts
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-openrd.dtsi
|
ARM: Kirkwood: DT versions of OpenRD boards
|
2014-05-16 05:20:38 +00:00 |
kirkwood-rd88f6192.dts
|
ARM: dts: kirkwood: set default pinctrl for SPI0
|
2014-05-05 00:52:55 +00:00 |
kirkwood-rd88f6281-a0.dts
|
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
|
2014-02-17 03:01:25 +00:00 |
kirkwood-rd88f6281-a1.dts
|
ARM: Kirkwood: convert rd88f6281-setup.c to DT.
|
2014-02-17 03:01:25 +00:00 |
kirkwood-rd88f6281.dtsi
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-rs212.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-rs409.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-rs411.dts
|
ARM: dts: kirkwood: add stdout-path property to all boards
|
2014-05-05 00:48:35 +00:00 |
kirkwood-sheevaplug-common.dtsi
|
ARM: dts: kirkwood: set default pinctrl for NAND
|
2014-05-05 00:53:06 +00:00 |
kirkwood-sheevaplug-esata.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-sheevaplug.dts
|
ARM: DT: Kirkwood: Use symbolic names from gpio.h
|
2013-12-08 01:00:54 +00:00 |
kirkwood-synology.dtsi
|
ARM: dts: kirkwood: set default pinctrl for I2C0
|
2014-05-05 00:53:15 +00:00 |
kirkwood-t5325.dts
|
ARM: Kirkwood: t5325: Use simple card to instantiate audio
|
2014-05-05 01:18:45 +00:00 |
kirkwood-topkick.dts
|
ARM: dts: kirkwood: set default pinctrl for I2C0
|
2014-05-05 00:53:15 +00:00 |
kirkwood-ts219-6281.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-ts219-6282.dts
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood-ts219.dtsi
|
ARM: dts: kirkwood: set default pinctrl for I2C0
|
2014-05-05 00:53:15 +00:00 |
kirkwood-ts419-6281.dts
|
ARM: Kirkwood: Add DT description of QNAP 419
|
2014-02-05 02:22:07 +00:00 |
kirkwood-ts419-6282.dts
|
ARM: Kirkwood: Add DT description of QNAP 419
|
2014-02-05 02:22:07 +00:00 |
kirkwood-ts419.dtsi
|
ARM: dts: kirkwood: rename pin-controller nodes
|
2014-05-05 00:51:33 +00:00 |
kirkwood.dtsi
|
ARM: Kirkwood: DT: Add missing #sound-dai-cells property
|
2014-05-05 01:18:44 +00:00 |
kizbox.dts
|
ARM: at91/dt: add watchdog properties to kizbox board
|
2014-01-28 21:33:38 +01:00 |
lpc32xx.dtsi
|
|
|
Makefile
|
ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
|
2014-06-19 10:45:36 +02:00 |
marco-evb.dts
|
|
|
marco.dtsi
|
ARM: l2c: prima2: convert to generic l2c OF initialisation
|
2014-05-30 00:49:55 +01:00 |
mmp2-brownstone.dts
|
|
|
mmp2.dtsi
|
|
|
moxart-uc7112lx.dts
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
moxart.dtsi
|
ARM: moxart: move fixed rate clock child node to board level dts
|
2014-01-23 18:13:44 -08:00 |
mpa1600.dts
|
|
|
mxs-pinfunc.h
|
|
|
nspire-classic.dtsi
|
|
|
nspire-clp.dts
|
|
|
nspire-cx.dts
|
|
|
nspire-tp.dts
|
|
|
nspire.dtsi
|
|
|
omap2.dtsi
|
ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox
|
2014-04-25 09:53:43 -07:00 |
omap3-beagle-xm-ab.dts
|
ARM: dts: Add support for the BeagleBoard xM A/B
|
2014-04-18 16:50:23 -07:00 |
omap3-beagle-xm.dts
|
ARM: dts: Enable twl4030 off-idle configuration for selected omaps
|
2014-06-16 01:10:22 -07:00 |
omap3-beagle.dts
|
ARM: omap3-beagle.dts: add display information
|
2014-03-19 11:11:27 +02:00 |
omap3-cm-t3x30.dtsi
|
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
|
2014-04-23 11:29:49 -07:00 |
omap3-cm-t3x.dtsi
|
ARM: dts: cm-t3x30: add HS USB Host support
|
2014-02-28 14:09:11 -08:00 |
omap3-cm-t3517.dts
|
ARM: dts: sbc-t3517: add support for sbc-t3517
|
2014-02-28 14:09:14 -08:00 |
omap3-cm-t3530.dts
|
ARM: dts: Add MMC2/SDIO/WLAN support for cm-t3530
|
2014-03-12 10:40:37 -07:00 |
omap3-cm-t3730.dts
|
ARM: dts: sbc-t3x: refactor DT support
|
2014-02-28 14:09:08 -08:00 |
omap3-devkit8000.dts
|
ARM: dts: OMAP2+: remove uses of obsolete gpmc,device-nand
|
2014-04-18 16:37:43 -07:00 |
omap3-evm-37xx.dts
|
fbdev changes for 3.16 (omap devicetree)
|
2014-06-09 18:32:13 -07:00 |
omap3-evm-common.dtsi
|
ARM: dts: Enable twl4030 off-idle configuration for selected omaps
|
2014-06-16 01:10:22 -07:00 |
omap3-evm.dts
|
|
|
omap3-gta04.dts
|
ARM: dts: omap3-gta04: Add display support
|
2014-06-03 10:22:21 +03:00 |
omap3-igep0020.dts
|
ARM: dts: omap3-igep0020: use SMSC9221 timings
|
2014-04-25 09:30:00 -07:00 |
omap3-igep0030.dts
|
ARM: dts: omap3-igep: fix boot fail due wrong compatible match
|
2014-02-28 11:29:18 -08:00 |
omap3-igep.dtsi
|
ARM: dts: omap3-igep0020: use SMSC9221 timings
|
2014-04-25 09:30:00 -07:00 |
omap3-ldp.dts
|
fbdev changes for 3.16 (omap devicetree)
|
2014-06-09 18:32:13 -07:00 |
omap3-lilly-a83x.dtsi
|
ARM: dts: omap3 a83x: fix duplicate usb pin config
|
2014-05-27 13:51:01 -07:00 |
omap3-lilly-dbb056.dts
|
ARM: dts: omap3: Add support for INCOstartec DBB056 baseboard
|
2014-02-28 15:04:28 -08:00 |
omap3-n9.dts
|
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
|
2014-02-13 15:21:36 -08:00 |
omap3-n900.dts
|
ARM: dts: Enable twl4030 off-idle configuration for selected omaps
|
2014-06-16 01:10:22 -07:00 |
omap3-n950-n9.dtsi
|
ARM: dts: n950: Add missing regulator definitions
|
2014-05-06 10:19:49 -07:00 |
omap3-n950.dts
|
ARM: dts: N9/N950: fix boot hang with 3.14-rc1
|
2014-02-13 15:21:36 -08:00 |
omap3-overo-alto35-common.dtsi
|
ARM: dts: overo: Add support for 3.5'' LCD output
|
2014-06-03 10:22:23 +03:00 |
omap3-overo-alto35.dts
|
ARM: dts: Add support for the Overo Alto35
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-base.dtsi
|
ARM: dts: overo: Push uart3 pinmux down to expansion board
|
2014-03-12 10:18:16 -07:00 |
omap3-overo-chestnut43-common.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-chestnut43.dts
|
ARM: dts: Add support for the Overo Chestnut43
|
2014-03-12 10:21:15 -07:00 |
omap3-overo-common-dvi.dtsi
|
ARM: dts: overo: Add support for DVI output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-common-lcd35.dtsi
|
ARM: dts: overo: Add support for 3.5'' LCD output
|
2014-06-03 10:22:23 +03:00 |
omap3-overo-common-lcd43.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-common-peripherals.dtsi
|
ARM: dts: overo: Add LIS33DE accelerometer
|
2014-03-12 10:21:12 -07:00 |
omap3-overo-gallop43-common.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-gallop43.dts
|
ARM: dts: Add support for the Overo Gallop43
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-palo43-common.dtsi
|
ARM: dts: overo: Add support for 4.3'' LCD output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-palo43.dts
|
ARM: dts: Add support for the Overo Palo43
|
2014-03-12 10:21:13 -07:00 |
omap3-overo-storm-alto35.dts
|
ARM: dts: Add support for the Overo Alto35
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-storm-chestnut43.dts
|
ARM: dts: Add support for the Overo Chestnut43
|
2014-03-12 10:21:15 -07:00 |
omap3-overo-storm-gallop43.dts
|
ARM: dts: Add support for the Overo Gallop43
|
2014-03-12 10:21:14 -07:00 |
omap3-overo-storm-palo43.dts
|
ARM: dts: Add support for the Overo Palo43
|
2014-03-12 10:21:13 -07:00 |
omap3-overo-storm-summit.dts
|
ARM: dts: Add support for the Overo Summit
|
2014-03-12 10:21:16 -07:00 |
omap3-overo-storm-tobi.dts
|
ARM: dts: overo: reorganize include files
|
2014-03-12 10:17:25 -07:00 |
omap3-overo-storm.dtsi
|
ARM: dts: omap3-overo: Add HSUSB PHY
|
2014-03-12 10:17:27 -07:00 |
omap3-overo-summit-common.dtsi
|
ARM: dts: overo: Add support for DVI output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-summit.dts
|
ARM: dts: Add support for the Overo Summit
|
2014-03-12 10:21:16 -07:00 |
omap3-overo-tobi-common.dtsi
|
ARM: dts: overo: Add support for DVI output
|
2014-06-03 10:22:22 +03:00 |
omap3-overo-tobi.dts
|
ARM: dts: overo: reorganize include files
|
2014-03-12 10:17:25 -07:00 |
omap3-overo.dtsi
|
Merge branch '3.15/dss-dt-dts' into 3.15/fbdev
|
2014-03-20 08:18:27 +02:00 |
omap3-panel-sharp-ls037v7dw01.dtsi
|
ARM: dts: Add LCD panel sharp ls037v7dw01 support for omap3-evm and ldp
|
2014-06-03 10:22:21 +03:00 |
omap3-sb-t35.dtsi
|
ARM: dts: Fix GPMC timings for LAN9220
|
2014-04-23 11:30:09 -07:00 |
omap3-sbc-t3517.dts
|
ARM: dts: Fix GPMC Ethernet timings for omap cm-t sbc-t boards for device tree
|
2014-04-23 11:29:49 -07:00 |
omap3-sbc-t3530.dts
|
ARM: dts: sbc-t3530: add support for sbc-t3530
|
2014-02-28 14:09:13 -08:00 |
omap3-sbc-t3730.dts
|
ARM: dts: sbc-t3730: add pinmux for usb hub reset
|
2014-02-28 14:09:12 -08:00 |
omap3-zoom3.dts
|
ARM: dts: Split omap3 pinmux core device
|
2014-01-07 14:01:39 -08:00 |
omap3.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
omap3xxx-clocks.dtsi
|
ARM: dts: set 'ti,set-rate-parent' for dpll4_m5 path
|
2014-05-16 17:08:57 +03:00 |
omap4-cpu-thermal.dtsi
|
arm: dts: add omap4 CPU thermal data
|
2013-12-04 09:34:25 -04:00 |
omap4-duovero-parlor.dts
|
ARM: dts: duovero-parlor: Add HDMI output
|
2014-06-03 10:22:23 +03:00 |
omap4-duovero.dtsi
|
ARM: dts: Enable mcpdm and mcbsp1 on DuoVero
|
2014-05-19 17:20:31 -07:00 |
omap4-panda-a4.dts
|
|
|
omap4-panda-common.dtsi
|
ARM: dts: Fix omap serial wake-up when booted with device tree
|
2014-05-06 13:48:35 -07:00 |
omap4-panda-es.dts
|
|
|
omap4-panda.dts
|
|
|
omap4-sdp-es23plus.dts
|
|
|
omap4-sdp.dts
|
ARM: dts: Fix omap serial wake-up when booted with device tree
|
2014-05-06 13:48:35 -07:00 |
omap4-var-dvk-om44.dts
|
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
|
2014-05-19 17:20:30 -07:00 |
omap4-var-om44customboard.dtsi
|
ARM: dts: Add support for OMAP4 Variscite OM44 family
|
2014-05-19 17:20:30 -07:00 |
omap4-var-som-om44-wlan.dtsi
|
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
|
2014-05-19 17:20:30 -07:00 |
omap4-var-som-om44.dtsi
|
ARM: dts: Add support for OMAP4 Variscite OM44 family
|
2014-05-19 17:20:30 -07:00 |
omap4-var-stk-om44.dts
|
ARM: dts: Add VAR-SOM-OM44 WLAN nodes
|
2014-05-19 17:20:30 -07:00 |
omap4.dtsi
|
fbdev changes for 3.16 (omap devicetree)
|
2014-06-09 18:32:13 -07:00 |
omap5-cm-t54.dts
|
ARM: dts: Change IOPAD macro's for OMAP4/5
|
2014-05-19 17:20:29 -07:00 |
omap5-core-thermal.dtsi
|
arm: dts: add omap5 CORE thermal data
|
2013-12-04 09:34:26 -04:00 |
omap5-gpu-thermal.dtsi
|
arm: dts: add omap5 GPU thermal data
|
2013-12-04 09:34:26 -04:00 |
omap5-sbc-t54.dts
|
ARM: dts: Change IOPAD macro's for OMAP4/5
|
2014-05-19 17:20:29 -07:00 |
omap5-uevm.dts
|
ARM: dts: omap5-uevm.dts: add display nodes
|
2014-06-03 10:22:21 +03:00 |
omap5.dtsi
|
ARM: dts: omap5: Update CPU OPP table as per final production Manual
|
2014-06-16 04:59:28 -07:00 |
omap24xx-clocks.dtsi
|
ARM: dts: omap2 clock data
|
2014-05-28 13:11:36 +03:00 |
omap34xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
omap34xx-omap36xx-clocks.dtsi
|
ARM: dts: omap3 clock data
|
2014-01-17 12:36:41 -08:00 |
omap34xx.dtsi
|
ARM: dts: omap3-n900: Add SSI support
|
2014-05-27 11:59:44 -07:00 |
omap36xx-am35xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: fix omap3 dss clock handle names
|
2014-03-19 09:31:47 +02:00 |
omap36xx-clocks.dtsi
|
ARM: dts: use ti,fixed-factor-clock for dpll4_m5x2_mul_ck
|
2014-05-16 17:08:57 +03:00 |
omap36xx-hs.dtsi
|
ARM: dts: Fix booting for secure omaps
|
2013-12-06 15:30:43 -08:00 |
omap36xx-omap3430es2plus-clocks.dtsi
|
ARM: dts: omap3 clocks: simplify ssi aliases
|
2014-02-28 14:02:25 -08:00 |
omap36xx.dtsi
|
ARM: dts: omap3-n900: Add SSI support
|
2014-05-27 11:59:44 -07:00 |
omap44xx-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap54xx-clocks.dtsi
|
Merge branch 'for-v3.16/ti-clk-drv' of github.com:t-kristo/linux-pm into clk-next
|
2014-06-10 16:53:25 -07:00 |
omap443x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap443x.dtsi
|
ARM: dts: OMAP4: Add device nodes for ABB
|
2014-03-05 11:53:36 -08:00 |
omap446x-clocks.dtsi
|
ARM: dts: omap4 clock data
|
2014-01-17 12:35:57 -08:00 |
omap2420-clocks.dtsi
|
ARM: dts: omap2 clock data
|
2014-05-28 13:11:36 +03:00 |
omap2420-h4.dts
|
|
|
omap2420-n8x0-common.dtsi
|
|
|
omap2420-n800.dts
|
|
|
omap2420-n810-wimax.dts
|
|
|
omap2420-n810.dts
|
|
|
omap2420.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
omap2430-clocks.dtsi
|
ARM: dts: omap2 clock data
|
2014-05-28 13:11:36 +03:00 |
omap2430-sdp.dts
|
|
|
omap2430.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
omap3430-sdp.dts
|
Add craneboard devices
|
2014-03-02 14:22:03 -08:00 |
omap3430es1-clocks.dtsi
|
ARM: dts: fix omap3 dss clock handle names
|
2014-03-19 09:31:47 +02:00 |
omap4460.dtsi
|
ARM: dts: OMAP4: Add device nodes for ABB
|
2014-03-05 11:53:36 -08:00 |
omap-gpmc-smsc911x.dtsi
|
ARM: dts: Fix GPMC timings for LAN9220
|
2014-04-23 11:30:09 -07:00 |
omap-gpmc-smsc9221.dtsi
|
ARM: dts: omap: Add common file for SMSC9221
|
2014-03-12 10:18:16 -07:00 |
omap-zoom-common.dtsi
|
|
|
orion5x-lacie-d2-network.dts
|
ARM: orion5x: convert d2net to Device Tree
|
2014-04-26 19:45:24 +00:00 |
orion5x-lacie-ethernet-disk-mini-v2.dts
|
ARM: orion5x: keep TODO list in edmini_v2 DT
|
2014-04-26 19:45:19 +00:00 |
orion5x-maxtor-shared-storage-2.dts
|
ARM: orion5x: convert Maxtor Shared Storage II to the Device Tree
|
2014-04-26 19:45:25 +00:00 |
orion5x-mv88f5182.dtsi
|
ARM: orion5x: add standard pinctrl configs for sata0 and sata1
|
2014-04-26 19:45:13 +00:00 |
orion5x-rd88f5182-nas.dts
|
ARM: orion5x: convert RD-88F5182 to Device Tree
|
2014-04-26 19:45:22 +00:00 |
orion5x.dtsi
|
ARM: orion5x: add Device Bus description at SoC level
|
2014-04-26 19:45:12 +00:00 |
phy3250.dts
|
|
|
picoxcell-pc3x2.dtsi
|
|
|
picoxcell-pc3x3.dtsi
|
|
|
picoxcell-pc7302-pc3x2.dts
|
|
|
picoxcell-pc7302-pc3x3.dts
|
|
|
pm9g45.dts
|
|
|
prima2-evb.dts
|
|
|
prima2.dtsi
|
Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
|
2014-06-05 15:57:04 -07:00 |
pxa2xx.dtsi
|
|
|
pxa3xx.dtsi
|
|
|
pxa27x.dtsi
|
ARM: pxa: add PWM nodes to pxa27x.dtsi
|
2013-12-11 16:36:47 -08:00 |
pxa168-aspenite.dts
|
|
|
pxa168.dtsi
|
|
|
pxa910-dkb.dts
|
|
|
pxa910.dtsi
|
|
|
qcom-apq8064-ifc6410.dts
|
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
|
2014-05-29 10:39:07 -05:00 |
qcom-apq8064-v2.0.dtsi
|
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
|
2014-05-29 10:39:07 -05:00 |
qcom-apq8064.dtsi
|
ARM: dts: qcom: Add initial APQ8064 SoC and IFC6410 board device trees
|
2014-05-29 10:39:07 -05:00 |
qcom-apq8074-dragonboard.dts
|
ARM: dts: qcom: Update msm8974/apq8074 device trees
|
2014-05-28 13:31:45 -05:00 |
qcom-apq8084-mtp.dts
|
ARM: dts: qcom: Add APQ8084-MTP board support
|
2014-05-29 11:16:45 -05:00 |
qcom-apq8084.dtsi
|
ARM: dts: qcom: Add APQ8084 SoC support
|
2014-05-29 11:16:33 -05:00 |
qcom-msm8660-surf.dts
|
ARM: dts: qcom: Update msm8660 device trees
|
2014-05-29 10:35:04 -05:00 |
qcom-msm8660.dtsi
|
ARM: dts: qcom: Update msm8660 device trees
|
2014-05-29 10:35:04 -05:00 |
qcom-msm8960-cdp.dts
|
ARM: dts: qcom: Update msm8960 device trees
|
2014-05-29 10:35:00 -05:00 |
qcom-msm8960.dtsi
|
ARM: dts: qcom: Update msm8960 device trees
|
2014-05-29 10:35:00 -05:00 |
qcom-msm8974.dtsi
|
ARM: dts: qcom: Update msm8974/apq8074 device trees
|
2014-05-28 13:31:45 -05:00 |
r7s72100-genmai.dts
|
ARM: shmobile: Sync Genmai DTS with Genmai reference DTS
|
2014-05-17 09:06:16 +09:00 |
r7s72100.dtsi
|
ARM: shmobile: r7s72100: add spi clocks to dtsi
|
2014-05-14 11:42:54 +09:00 |
r8a73a4-ape6evm-reference.dts
|
ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref
|
2013-12-10 17:27:17 +09:00 |
r8a73a4-ape6evm.dts
|
ARM: shmobile: Include all 2 GiB of memory on APE6EVM
|
2013-12-10 17:27:17 +09:00 |
r8a73a4.dtsi
|
ARM: shmobile: dts: Move interrupt-parent property to root node
|
2014-05-13 10:13:19 +09:00 |
r8a7740-armadillo800eva-reference.dts
|
ARM: shmobile: armadillo-reference dts: Add Ethernet support
|
2014-05-11 10:44:52 +09:00 |
r8a7740-armadillo800eva.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7740.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
r8a7778-bockw-reference.dts
|
ARM: shmobile: bockw reference dts: Add SPI FLASH
|
2014-04-14 11:31:14 +09:00 |
r8a7778-bockw.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7778.dtsi
|
ARM: shmobile: dts: Move interrupt-parent property to root node
|
2014-05-13 10:13:19 +09:00 |
r8a7779-marzen-reference.dts
|
ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull
|
2014-05-13 13:41:06 +09:00 |
r8a7779-marzen.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
r8a7779.dtsi
|
ARM: shmobile: dts: Move interrupt-parent property to root node
|
2014-05-13 10:13:19 +09:00 |
r8a7790-lager.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
r8a7790.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
r8a7791-henninger.dts
|
ARM: shmobile: henninger: add MSIOF0 DT support
|
2014-05-11 09:44:48 +09:00 |
r8a7791-koelsch.dts
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
r8a7791.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
rk3xxx.dtsi
|
ARM: dts: rockchip: convert pinctrl nodes to new bindings
|
2014-05-10 01:41:20 +02:00 |
rk3066a-bqcurie2.dts
|
ARM: dts: rockchip: add root compatible properties
|
2014-05-10 01:38:00 +02:00 |
rk3066a-clocks.dtsi
|
|
|
rk3066a.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
rk3188-clocks.dtsi
|
|
|
rk3188-radxarock.dts
|
ARM: dts: rockchip: add root compatible properties
|
2014-05-10 01:38:00 +02:00 |
rk3188.dtsi
|
ARM: SoC devicetree updates for 3.16
|
2014-06-02 16:34:00 -07:00 |
s3c24xx.dtsi
|
|
|
s3c64xx-pinctrl.dtsi
|
|
|
s3c64xx.dtsi
|
|
|
s3c2416-pinctrl.dtsi
|
|
|
s3c2416-smdk2416.dts
|
ARM: dts: add clock data for s3c2416
|
2014-04-15 02:11:08 +09:00 |
s3c2416.dtsi
|
ARM: dts: add clock data for s3c2416
|
2014-04-15 02:11:08 +09:00 |
s3c6400.dtsi
|
|
|
s3c6410-mini6410.dts
|
|
|
s3c6410-smdk6410.dts
|
|
|
s3c6410.dtsi
|
|
|
sama5d3_can.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_emac.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_gmac.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_lcd.dtsi
|
ARM: at91/dt: define sama5d3 clocks
|
2013-12-02 15:31:28 +01:00 |
sama5d3_mci2.dtsi
|
dt-bindings: clock: Move at91.h to dt-bindigs/clock
|
2014-04-18 23:44:52 +02:00 |
sama5d3_tcb1.dtsi
|
dt-bindings: clock: Move at91.h to dt-bindigs/clock
|
2014-04-18 23:44:52 +02:00 |
sama5d3_uart.dtsi
|
dt-bindings: clock: Move at91.h to dt-bindigs/clock
|
2014-04-18 23:44:52 +02:00 |
sama5d3.dtsi
|
ARM: SoC updates for 3.16 (part 1)
|
2014-06-02 16:15:12 -07:00 |
sama5d3xcm.dtsi
|
ARM: at91/dt: add xtal frequencies to sama5d3xcm boards
|
2014-05-07 18:27:53 +02:00 |
sama5d3xdm.dtsi
|
ARM: at91/dt: sama5d3: remove useless adc properties
|
2014-03-12 19:11:29 +01:00 |
sama5d3xmb.dtsi
|
ARM: at91: sama5d3: clock for ssc from rk pin
|
2014-04-18 22:43:44 +02:00 |
sama5d31.dtsi
|
|
|
sama5d31ek.dts
|
|
|
sama5d33.dtsi
|
|
|
sama5d33ek.dts
|
|
|
sama5d34.dtsi
|
|
|
sama5d34ek.dts
|
|
|
sama5d35.dtsi
|
|
|
sama5d35ek.dts
|
|
|
sama5d36.dtsi
|
ARM: at91: fix network interface ordering for sama5d36
|
2014-03-11 12:49:10 -07:00 |
sama5d36ek.dts
|
ARM: at91: sama5d3/dt: add sama5d36ek dts files
|
2013-12-10 09:59:57 -08:00 |
samsung_k3pe0e000b.dtsi
|
|
|
sh73a0-kzm9g-reference.dts
|
ARM: shmobile: kzm9g-reference dts: Use KEY_* macros for gpio-keys
|
2014-04-14 11:31:15 +09:00 |
sh73a0-kzm9g.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
sh73a0.dtsi
|
ARM: shmobile: sh73a0: drop address cells from GIC node
|
2014-04-15 07:37:57 +09:00 |
sh7372-mackerel.dts
|
ARM: shmobile: Use #include in device tree sources
|
2013-12-10 17:27:06 +09:00 |
sh7372.dtsi
|
|
|
skeleton64.dtsi
|
|
|
skeleton.dtsi
|
|
|
socfpga_arria5_socdk.dts
|
ARM: socfpga: dts: Add DTS entries for USB
|
2014-05-05 22:33:16 -05:00 |
socfpga_arria5.dtsi
|
ARM: socfpga: dts: Remove hard coded clock-frequency property
|
2014-05-05 22:33:15 -05:00 |
socfpga_cyclone5_socdk.dts
|
ARM: socfpga: dts: Add DTS entries for USB
|
2014-05-05 22:33:16 -05:00 |
socfpga_cyclone5_sockit.dts
|
ARM: socfpga: dts: Add DTS entries for USB
|
2014-05-05 22:33:16 -05:00 |
socfpga_cyclone5_socrates.dts
|
ARM: socfpga: dts: convert to preprocessor includes
|
2014-05-05 22:33:14 -05:00 |
socfpga_cyclone5.dtsi
|
ARM: socfpga: dts: Remove hard coded clock-frequency property
|
2014-05-05 22:33:15 -05:00 |
socfpga_vt.dts
|
ARM: socfpga: dts: convert to preprocessor includes
|
2014-05-05 22:33:14 -05:00 |
socfpga.dtsi
|
ARM: socfpga: dts: add watchdog0+1
|
2014-05-22 16:45:31 -05:00 |
spear3xx.dtsi
|
|
|
spear13xx.dtsi
|
|
|
spear300-evb.dts
|
|
|
spear300.dtsi
|
|
|
spear310-evb.dts
|
|
|
spear310.dtsi
|
|
|
spear320-evb.dts
|
|
|
spear320-hmi.dts
|
Shiraz has moved
|
2014-04-18 16:40:08 -07:00 |
spear320.dtsi
|
|
|
spear600-evb.dts
|
|
|
spear600.dtsi
|
|
|
spear1310-evb.dts
|
|
|
spear1310.dtsi
|
|
|
spear1340-evb.dts
|
|
|
spear1340.dtsi
|
|
|
st-pincfg.h
|
ARM: STi: OF: Fix a typo in pincfg header
|
2013-12-04 08:58:39 +00:00 |
ste-ccu8540-pinctrl.dtsi
|
|
|
ste-ccu8540.dts
|
arm: dts: Fix missing device_type="memory" for ste-ccu8540
|
2014-05-16 15:22:40 +01:00 |
ste-ccu9540.dts
|
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
|
2014-05-12 12:52:40 +02:00 |
ste-dbx5x0.dtsi
|
ARM: ux500: switch SSP/SPI clock name to "SSPCLK"
|
2014-02-26 13:35:49 +01:00 |
ste-href-ab8500.dtsi
|
ARM: ux500: move AB8500 clock out pins to DT
|
2014-02-04 20:50:50 +01:00 |
ste-href-ab8505.dtsi
|
ARM: ux500: move last AB8505 set-up to DT
|
2014-02-04 20:50:55 +01:00 |
ste-href-family-pinctrl.dtsi
|
|
|
ste-href-stuib.dtsi
|
|
|
ste-href-tvk1281618.dtsi
|
|
|
ste-href.dtsi
|
ARM: ux500: Add a vmmc regulator through DT for the poped eMMC for href
|
2014-05-12 12:52:44 +02:00 |
ste-hrefprev60-stuib.dts
|
|
|
ste-hrefprev60-tvk.dts
|
|
|
ste-hrefprev60.dtsi
|
ARM: ux500: move AB8500 GPIOs to device tree
|
2014-02-04 20:46:50 +01:00 |
ste-hrefv60plus-stuib.dts
|
|
|
ste-hrefv60plus-tvk.dts
|
|
|
ste-hrefv60plus.dtsi
|
ARM: ux500: move AB8500 GPIOs to device tree
|
2014-02-04 20:46:50 +01:00 |
ste-nomadik-pinctrl.dtsi
|
|
|
ste-nomadik-s8815.dts
|
|
|
ste-nomadik-stn8815.dtsi
|
ARM: nomadik: Convert to the common mmc DT bindings for highspeed mode
|
2014-05-12 12:52:40 +02:00 |
ste-snowball.dts
|
ARM: ux500: Convert to the common mmc DT bindings for highspeed mode
|
2014-05-12 12:52:40 +02:00 |
ste-u300.dts
|
ARM: u300: Convert to the common mmc DT bindings for highspeed mode
|
2014-05-12 12:52:41 +02:00 |
stih41x-b2000.dtsi
|
ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
|
2014-05-21 14:27:14 +02:00 |
stih41x-b2020.dtsi
|
ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
|
2014-05-21 14:27:14 +02:00 |
stih41x-b2020x.dtsi
|
ARM: STi: stih41x: Add support for the FSM Serial Flash Controller
|
2014-03-27 02:01:25 +01:00 |
stih41x.dtsi
|
ARM: sti: stih41x: Provide a proper header for this DTSI file
|
2014-05-21 14:27:16 +02:00 |
stih407-b2120.dts
|
ARM: dts: STiH407: Add B2120 board support
|
2014-05-21 14:20:33 +02:00 |
stih407-clock.dtsi
|
ARM: dts: Add STiH407 SoC support
|
2014-05-21 14:20:27 +02:00 |
stih407-pinctrl.dtsi
|
ARM: dts: Add STiH407 SoC support
|
2014-05-21 14:20:27 +02:00 |
stih407.dtsi
|
ARM: dts: Add STiH407 SoC support
|
2014-05-21 14:20:27 +02:00 |
stih415-b2000.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih415-b2020.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih415-clock.dtsi
|
ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9
|
2014-05-21 14:27:14 +02:00 |
stih415-pinctrl.dtsi
|
Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
|
2014-05-23 22:35:56 +02:00 |
stih415.dtsi
|
ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6
|
2014-06-17 16:55:17 +02:00 |
stih416-b2000.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih416-b2020.dts
|
ARM: dts: Fix STi boards compatibles
|
2014-05-21 14:20:23 +02:00 |
stih416-b2020e.dts
|
ARM: stih41x: Rename stih416-b2020-revE.dts to stih416-b2020e.dts
|
2014-06-19 10:45:36 +02:00 |
stih416-clock.dtsi
|
ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU
|
2014-05-21 14:27:11 +02:00 |
stih416-pinctrl.dtsi
|
Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
|
2014-05-23 22:35:56 +02:00 |
stih416.dtsi
|
ARM: STi: DT: Properly define sti-ethclk & stmmaceth for stih415/6
|
2014-06-17 16:55:17 +02:00 |
sun4i-a10-a1000.dts
|
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
|
2014-05-11 19:07:00 +02:00 |
sun4i-a10-cubieboard.dts
|
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
|
2014-05-11 19:07:00 +02:00 |
sun4i-a10-hackberry.dts
|
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
|
2014-05-11 19:07:00 +02:00 |
sun4i-a10-inet97fv2.dts
|
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
|
2014-05-11 19:07:00 +02:00 |
sun4i-a10-mini-xplus.dts
|
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
|
2014-05-11 19:07:00 +02:00 |
sun4i-a10-olinuxino-lime.dts
|
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
|
2014-05-11 19:07:00 +02:00 |
sun4i-a10-pcduino.dts
|
ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
|
2014-05-11 19:07:00 +02:00 |
sun4i-a10.dtsi
|
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
|
2014-06-06 12:26:57 -07:00 |
sun5i-a10s-olinuxino-micro.dts
|
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
|
2014-05-11 19:07:07 +02:00 |
sun5i-a10s-r7-tv-dongle.dts
|
ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board
|
2014-05-12 17:06:55 +02:00 |
sun5i-a10s.dtsi
|
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
|
2014-06-06 12:26:57 -07:00 |
sun5i-a13-olinuxino-micro.dts
|
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
|
2014-05-11 19:07:07 +02:00 |
sun5i-a13-olinuxino.dts
|
ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes
|
2014-05-11 19:07:07 +02:00 |
sun5i-a13.dtsi
|
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
|
2014-06-06 12:26:57 -07:00 |
sun6i-a31-app4-evb1.dts
|
ARM: sunxi: dt: add APP4-EVB1 board support
|
2014-05-14 14:30:05 +02:00 |
sun6i-a31-colombus.dts
|
ARM: sun6i: Add MMC0 controller to the Colombus board
|
2014-05-22 10:49:21 +02:00 |
sun6i-a31-m9.dts
|
ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes
|
2014-05-11 19:07:10 +02:00 |
sun6i-a31.dtsi
|
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
|
2014-06-04 15:57:20 -07:00 |
sun7i-a20-cubieboard2.dts
|
ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
|
2014-05-11 19:07:22 +02:00 |
sun7i-a20-cubietruck.dts
|
ARM: dts: sun7i: cubietruck: set mmc3 bus-width property
|
2014-05-22 11:34:03 +02:00 |
sun7i-a20-i12-tvbox.dts
|
ARM: dts: sun7i: Add new i12-tvbox board
|
2014-05-22 11:35:07 +02:00 |
sun7i-a20-olinuxino-micro.dts
|
ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes
|
2014-05-11 19:07:22 +02:00 |
sun7i-a20.dtsi
|
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux into next
|
2014-06-06 12:26:57 -07:00 |
sunxi-common-regulators.dtsi
|
ARM: sunxi: Add fixed 3V regulator
|
2014-05-21 10:23:32 +02:00 |
tegra20-colibri-512.dtsi
|
ARM: SoC DT updates for 3.14
|
2014-01-23 18:45:38 -08:00 |
tegra20-harmony.dts
|
ARM: tegra: harmony - Add +5V HDMI supply
|
2014-04-28 09:57:39 -06:00 |
tegra20-iris-512.dts
|
ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
|
2013-12-16 14:09:20 -07:00 |
tegra20-medcom-wide.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
tegra20-paz00.dts
|
ARM: tegra: paz00: Add LVDS support to device tree
|
2014-02-05 09:47:22 -07:00 |
tegra20-plutux.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
tegra20-seaboard.dts
|
ARM: tegra: enable LCD panel on Seaboard
|
2014-02-19 10:15:37 -07:00 |
tegra20-tamonten.dtsi
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
tegra20-tec.dts
|
ARM: tegra: add missing unit addresses to DT
|
2013-12-16 14:09:16 -07:00 |
tegra20-trimslice.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
tegra20-ventana.dts
|
ARM: tegra: enable LCD panel on Ventana
|
2014-02-19 10:15:45 -07:00 |
tegra20-whistler.dts
|
ARM: tegra: set up /aliases entries for RTCs
|
2013-12-18 14:10:48 -07:00 |
tegra20.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra30-beaver.dts
|
ARM: tegra: beaver - Add +5V HDMI supply
|
2014-04-28 09:57:40 -06:00 |
tegra30-cardhu-a02.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
tegra30-cardhu-a04.dts
|
ARM: tegra: fix node sort order
|
2013-12-16 14:09:17 -07:00 |
tegra30-cardhu.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra30-colibri-eval-v3.dts
|
ARM: tegra: initial add of Colibri T30
|
2014-05-15 12:30:40 -06:00 |
tegra30-colibri.dtsi
|
ARM: tegra: initial add of Colibri T30
|
2014-05-15 12:30:40 -06:00 |
tegra30.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra114-dalmore.dts
|
ARM: tegra: add SD wp-gpios to Dalmore DT
|
2014-04-29 10:09:54 -06:00 |
tegra114-roth.dts
|
ARM: tegra: add device tree for SHIELD
|
2014-05-12 10:37:57 -06:00 |
tegra114-tn7.dts
|
ARM: tegra: add Tegra Note 7 device tree
|
2014-05-02 12:17:11 -06:00 |
tegra114.dtsi
|
ARM: tegra: device tree changes for 3.15
|
2014-03-20 14:40:56 -07:00 |
tegra124-jetson-tk1.dts
|
ARM: tegra: add SD wp-gpios to Jetson TK1 DT
|
2014-04-29 10:09:51 -06:00 |
tegra124-venice2.dts
|
ARM: tegra: add SD wp-gpios to Venice2 DT
|
2014-05-06 11:03:20 -06:00 |
tegra124.dtsi
|
ARM: tegra: device tree changes for 3.16
|
2014-05-21 15:06:16 -07:00 |
tny_a9g20.dts
|
|
|
tny_a9260_common.dtsi
|
|
|
tny_a9260.dts
|
|
|
tny_a9263.dts
|
|
|
tps6507x.dtsi
|
|
|
tps65217.dtsi
|
|
|
tps65910.dtsi
|
ARM: dts: tps65910 backup battery regulator
|
2014-02-28 13:52:25 -08:00 |
twl4030_omap3.dtsi
|
ARM: dts: Configure omap3 twl4030 I2C4 pins by default
|
2014-05-06 15:45:14 -07:00 |
twl4030.dtsi
|
ARM: dts: twl4030: Add madc
|
2014-05-06 10:19:49 -07:00 |
twl6030_omap4.dtsi
|
|
|
twl6030.dtsi
|
|
|
usb_a9g20_common.dtsi
|
|
|
usb_a9g20_lpw.dts
|
|
|
usb_a9g20-dab-mmx.dtsi
|
|
|
usb_a9g20.dts
|
|
|
usb_a9260_common.dtsi
|
|
|
usb_a9260.dts
|
|
|
usb_a9263.dts
|
|
|
versatile-ab.dts
|
|
|
versatile-pb.dts
|
of: Move testcase FDT data into drivers/of
|
2014-02-20 11:52:08 +00:00 |
vexpress-v2m-rs1.dtsi
|
mfd: vexpress: Define the device as MFD cells
|
2014-05-15 17:02:19 +01:00 |
vexpress-v2m.dtsi
|
mfd: vexpress: Define the device as MFD cells
|
2014-05-15 17:02:19 +01:00 |
vexpress-v2p-ca5s.dts
|
dts: ca5: add the global timer for the A5
|
2014-04-22 11:44:26 +02:00 |
vexpress-v2p-ca9.dts
|
|
|
vexpress-v2p-ca15_a7.dts
|
mfd: vexpress: Convert custom func API to regmap
|
2014-05-15 17:02:18 +01:00 |
vexpress-v2p-ca15-tc1.dts
|
|
|
vf610-colibri.dts
|
ARM: dts: add initial Colibri VF61 board support
|
2014-05-16 23:01:49 +08:00 |
vf610-cosmic.dts
|
ARM: dts: vf610: make pinctrl nodes board specific
|
2014-02-09 21:32:28 +08:00 |
vf610-pinfunc.h
|
|
|
vf610-twr.dts
|
ARM: dts: vf610-twr: Enables FTM PWM device.
|
2014-05-16 23:01:45 +08:00 |
vf610.dtsi
|
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
|
2014-06-04 15:57:20 -07:00 |
vt8500-bv07.dts
|
|
|
vt8500.dtsi
|
net: via-rhine: add OF bus binding
|
2014-04-23 15:24:06 -04:00 |
wm8505-ref.dts
|
|
|
wm8505.dtsi
|
|
|
wm8650-mid.dts
|
|
|
wm8650.dtsi
|
net: via-rhine: add OF bus binding
|
2014-04-23 15:24:06 -04:00 |
wm8750-apc8750.dts
|
|
|
wm8750.dtsi
|
|
|
wm8850-w70v2.dts
|
|
|
wm8850.dtsi
|
net: via-rhine: add OF bus binding
|
2014-04-23 15:24:06 -04:00 |
xenvm-4.2.dts
|
|
|
zynq-7000.dtsi
|
ARM: zynq: DT: Add GPIO node
|
2014-07-23 14:05:56 +02:00 |
zynq-zc702.dts
|
ARM: zynq: dt: Add I2C nodes to Zynq device tree
|
2014-04-22 09:30:49 +02:00 |
zynq-zc706.dts
|
ARM: zynq: dt: Add I2C nodes to Zynq device tree
|
2014-04-22 09:30:49 +02:00 |
zynq-zed.dts
|
ARM: dts: zynq: Add SDHCI nodes
|
2014-01-31 14:58:56 -08:00 |