forked from Minki/linux
ARM: dts: add dts files for exynos3250 SoC
This patch adds new exynos3250.dtsi to support Exynos3250 SoC based on Cortex-A7 dual core and includes following dt nodes: - GIC interrupt controller - Pinctrl to control GPIOs - Clock controller - CPU information (Cortex-A7 dual core) - UART to support serial port - MCT (Multi Core Timer) - ADC (Analog Digital Converter) - I2C/SPI bus - Power domain - PMU (Performance Monitoring Unit) - MSHC (Mobile Storage Host Controller) - PWM (Pluse Width Modulation) - AMBA bus - sysram node for SYSRAM memory mapping Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: devicetree@vger.kernel.org Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Tomasz Figa
Kukjin Kim
parent
f82785a92c
commit
5a992a9c98
475
arch/arm/boot/dts/exynos3250-pinctrl.dtsi
Normal file
475
arch/arm/boot/dts/exynos3250-pinctrl.dtsi
Normal file
@ -0,0 +1,475 @@
|
||||
/*
|
||||
* Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
|
||||
*
|
||||
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
|
||||
* tree nodes are listed in this file.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
&pinctrl_0 {
|
||||
gpa0: gpa0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpa1: gpa1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpb: gpb {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpc0: gpc0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpc1: gpc1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd0: gpd0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpd1: gpd1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
uart0_data: uart0-data {
|
||||
samsung,pins = "gpa0-0", "gpa0-1";
|
||||
samsung,pin-function = <0x2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
uart0_fctl: uart0-fctl {
|
||||
samsung,pins = "gpa0-2", "gpa0-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
uart1_data: uart1-data {
|
||||
samsung,pins = "gpa0-4", "gpa0-5";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
uart1_fctl: uart1-fctl {
|
||||
samsung,pins = "gpa0-6", "gpa0-7";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c2_bus: i2c2-bus {
|
||||
samsung,pins = "gpa0-6", "gpa0-7";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c3_bus: i2c3-bus {
|
||||
samsung,pins = "gpa1-2", "gpa1-3";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
spi0_bus: spi0-bus {
|
||||
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c4_bus: i2c4-bus {
|
||||
samsung,pins = "gpb-0", "gpb-1";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
spi1_bus: spi1-bus {
|
||||
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c5_bus: i2c5-bus {
|
||||
samsung,pins = "gpb-2", "gpb-3";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2s2_bus: i2s2-bus {
|
||||
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
|
||||
"gpc1-4";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pcm2_bus: pcm2-bus {
|
||||
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
|
||||
"gpc1-4";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c6_bus: i2c6-bus {
|
||||
samsung,pins = "gpc1-3", "gpc1-4";
|
||||
samsung,pin-function = <4>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm0_out: pwm0-out {
|
||||
samsung,pins = "gpd0-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm1_out: pwm1-out {
|
||||
samsung,pins = "gpd0-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c7_bus: i2c7-bus {
|
||||
samsung,pins = "gpd0-2", "gpd0-3";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm2_out: pwm2-out {
|
||||
samsung,pins = "gpd0-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm3_out: pwm3-out {
|
||||
samsung,pins = "gpd0-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c0_bus: i2c0-bus {
|
||||
samsung,pins = "gpd1-0", "gpd1-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
mipi0_clk: mipi0-clk {
|
||||
samsung,pins = "gpd1-0", "gpd1-1";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c1_bus: i2c1-bus {
|
||||
samsung,pins = "gpd1-2", "gpd1-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_1 {
|
||||
gpe0: gpe0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpe1: gpe1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpe2: gpe2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
|
||||
gpk0: gpk0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpk1: gpk1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpk2: gpk2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpl0: gpl0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpm0: gpm0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpm1: gpm1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpm2: gpm2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpm3: gpm3 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpm4: gpm4 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpx0: gpx0 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
|
||||
<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpx1: gpx1 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
|
||||
<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpx2: gpx2 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gpx3: gpx3 {
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
sd0_clk: sd0-clk {
|
||||
samsung,pins = "gpk0-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_cmd: sd0-cmd {
|
||||
samsung,pins = "gpk0-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_cd: sd0-cd {
|
||||
samsung,pins = "gpk0-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_rdqs: sd0-rdqs {
|
||||
samsung,pins = "gpk0-7";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_bus1: sd0-bus-width1 {
|
||||
samsung,pins = "gpk0-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_bus4: sd0-bus-width4 {
|
||||
samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd0_bus8: sd0-bus-width8 {
|
||||
samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_clk: sd1-clk {
|
||||
samsung,pins = "gpk1-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_cmd: sd1-cmd {
|
||||
samsung,pins = "gpk1-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_cd: sd1-cd {
|
||||
samsung,pins = "gpk1-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_bus1: sd1-bus-width1 {
|
||||
samsung,pins = "gpk1-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
sd1_bus4: sd1-bus-width4 {
|
||||
samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
cam_port_b_io: cam-port-b-io {
|
||||
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
|
||||
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
|
||||
"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <3>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
cam_port_b_clk_active: cam-port-b-clk-active {
|
||||
samsung,pins = "gpm2-2";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <3>;
|
||||
};
|
||||
|
||||
cam_port_b_clk_idle: cam-port-b-clk-idle {
|
||||
samsung,pins = "gpm2-2";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_i2c0: fimc-is-i2c0 {
|
||||
samsung,pins = "gpm4-0", "gpm4-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_i2c1: fimc-is-i2c1 {
|
||||
samsung,pins = "gpm4-2", "gpm4-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
fimc_is_uart: fimc-is-uart {
|
||||
samsung,pins = "gpm3-5", "gpm3-7";
|
||||
samsung,pin-function = <3>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
439
arch/arm/boot/dts/exynos3250.dtsi
Normal file
439
arch/arm/boot/dts/exynos3250.dtsi
Normal file
@ -0,0 +1,439 @@
|
||||
/*
|
||||
* Samsung's Exynos3250 SoC device tree source
|
||||
*
|
||||
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Samsung's Exynos3250 SoC device nodes are listed in this file. Exynos3250
|
||||
* based board files can include this file and provide values for board specfic
|
||||
* bindings.
|
||||
*
|
||||
* Note: This file does not include device nodes for all the controllers in
|
||||
* Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
|
||||
* nodes can be added to this file.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "skeleton.dtsi"
|
||||
#include <dt-bindings/clock/exynos3250.h>
|
||||
|
||||
/ {
|
||||
compatible = "samsung,exynos3250";
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
pinctrl0 = &pinctrl_0;
|
||||
pinctrl1 = &pinctrl_1;
|
||||
mshc0 = &mshc_0;
|
||||
mshc1 = &mshc_1;
|
||||
spi0 = &spi_0;
|
||||
spi1 = &spi_1;
|
||||
i2c0 = &i2c_0;
|
||||
i2c1 = &i2c_1;
|
||||
i2c2 = &i2c_2;
|
||||
i2c3 = &i2c_3;
|
||||
i2c4 = &i2c_4;
|
||||
i2c5 = &i2c_5;
|
||||
i2c6 = &i2c_6;
|
||||
i2c7 = &i2c_7;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <0>;
|
||||
clock-frequency = <1000000000>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
reg = <1>;
|
||||
clock-frequency = <1000000000>;
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
fixed-rate-clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
xusbxti: clock@0 {
|
||||
compatible = "fixed-clock";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
clock-frequency = <0>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xusbxti";
|
||||
};
|
||||
|
||||
xxti: clock@1 {
|
||||
compatible = "fixed-clock";
|
||||
reg = <1>;
|
||||
clock-frequency = <0>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xxti";
|
||||
};
|
||||
|
||||
xtcxo: clock@2 {
|
||||
compatible = "fixed-clock";
|
||||
reg = <2>;
|
||||
clock-frequency = <0>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "xtcxo";
|
||||
};
|
||||
};
|
||||
|
||||
sysram@02020000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x02020000 0x40000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x02020000 0x40000>;
|
||||
|
||||
smp-sysram@0 {
|
||||
compatible = "samsung,exynos4210-sysram";
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
smp-sysram@3f000 {
|
||||
compatible = "samsung,exynos4210-sysram-ns";
|
||||
reg = <0x3f000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
chipid@10000000 {
|
||||
compatible = "samsung,exynos4210-chipid";
|
||||
reg = <0x10000000 0x100>;
|
||||
};
|
||||
|
||||
sys_reg: syscon@10010000 {
|
||||
compatible = "samsung,exynos3-sysreg", "syscon";
|
||||
reg = <0x10010000 0x400>;
|
||||
};
|
||||
|
||||
pd_cam: cam-power-domain@10023C00 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023C00 0x20>;
|
||||
};
|
||||
|
||||
pd_mfc: mfc-power-domain@10023C40 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023C40 0x20>;
|
||||
};
|
||||
|
||||
pd_g3d: g3d-power-domain@10023C60 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023C60 0x20>;
|
||||
};
|
||||
|
||||
pd_lcd0: lcd0-power-domain@10023C80 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023C80 0x20>;
|
||||
};
|
||||
|
||||
pd_isp: isp-power-domain@10023CA0 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023CA0 0x20>;
|
||||
};
|
||||
|
||||
cmu: clock-controller@10030000 {
|
||||
compatible = "samsung,exynos3250-cmu";
|
||||
reg = <0x10030000 0x20000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
rtc: rtc@10070000 {
|
||||
compatible = "samsung,s3c6410-rtc";
|
||||
reg = <0x10070000 0x100>;
|
||||
interrupts = <0 73 0>, <0 74 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gic: interrupt-controller@10481000 {
|
||||
compatible = "arm,cortex-a15-gic";
|
||||
#interrupt-cells = <3>;
|
||||
interrupt-controller;
|
||||
reg = <0x10481000 0x1000>,
|
||||
<0x10482000 0x1000>,
|
||||
<0x10484000 0x2000>,
|
||||
<0x10486000 0x2000>;
|
||||
interrupts = <1 9 0xf04>;
|
||||
};
|
||||
|
||||
mct@10050000 {
|
||||
compatible = "samsung,exynos4210-mct";
|
||||
reg = <0x10050000 0x800>;
|
||||
interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
|
||||
<0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
|
||||
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
|
||||
clock-names = "fin_pll", "mct";
|
||||
};
|
||||
|
||||
pinctrl_1: pinctrl@11000000 {
|
||||
compatible = "samsung,exynos3250-pinctrl";
|
||||
reg = <0x11000000 0x1000>;
|
||||
interrupts = <0 225 0>;
|
||||
|
||||
wakeup-interrupt-controller {
|
||||
compatible = "samsung,exynos4210-wakeup-eint";
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <0 48 0>;
|
||||
};
|
||||
};
|
||||
|
||||
pinctrl_0: pinctrl@11400000 {
|
||||
compatible = "samsung,exynos3250-pinctrl";
|
||||
reg = <0x11400000 0x1000>;
|
||||
interrupts = <0 240 0>;
|
||||
};
|
||||
|
||||
mshc_0: mshc@12510000 {
|
||||
compatible = "samsung,exynos5250-dw-mshc";
|
||||
reg = <0x12510000 0x1000>;
|
||||
interrupts = <0 142 0>;
|
||||
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x80>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mshc_1: mshc@12520000 {
|
||||
compatible = "samsung,exynos5250-dw-mshc";
|
||||
reg = <0x12520000 0x1000>;
|
||||
interrupts = <0 143 0>;
|
||||
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
|
||||
clock-names = "biu", "ciu";
|
||||
fifo-depth = <0x80>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
amba {
|
||||
compatible = "arm,amba-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
interrupt-parent = <&gic>;
|
||||
ranges;
|
||||
|
||||
pdma0: pdma@12680000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12680000 0x1000>;
|
||||
interrupts = <0 138 0>;
|
||||
clocks = <&cmu CLK_PDMA0>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
#dma-requests = <32>;
|
||||
};
|
||||
|
||||
pdma1: pdma@12690000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x12690000 0x1000>;
|
||||
interrupts = <0 139 0>;
|
||||
clocks = <&cmu CLK_PDMA1>;
|
||||
clock-names = "apb_pclk";
|
||||
#dma-cells = <1>;
|
||||
#dma-channels = <8>;
|
||||
#dma-requests = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
adc: adc@126C0000 {
|
||||
compatible = "samsung,exynos-adc-v3";
|
||||
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
|
||||
interrupts = <0 137 0>;
|
||||
clock-names = "adc", "sclk_tsadc";
|
||||
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
|
||||
#io-channel-cells = <1>;
|
||||
io-channel-ranges;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial_0: serial@13800000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13800000 0x100>;
|
||||
interrupts = <0 109 0>;
|
||||
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial_1: serial@13810000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13810000 0x100>;
|
||||
interrupts = <0 110 0>;
|
||||
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_0: i2c@13860000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13860000 0x100>;
|
||||
interrupts = <0 113 0>;
|
||||
clocks = <&cmu CLK_I2C0>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_1: i2c@13870000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13870000 0x100>;
|
||||
interrupts = <0 114 0>;
|
||||
clocks = <&cmu CLK_I2C1>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_2: i2c@13880000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13880000 0x100>;
|
||||
interrupts = <0 115 0>;
|
||||
clocks = <&cmu CLK_I2C2>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_3: i2c@13890000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x13890000 0x100>;
|
||||
interrupts = <0 116 0>;
|
||||
clocks = <&cmu CLK_I2C3>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_4: i2c@138A0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138A0000 0x100>;
|
||||
interrupts = <0 117 0>;
|
||||
clocks = <&cmu CLK_I2C4>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_5: i2c@138B0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138B0000 0x100>;
|
||||
interrupts = <0 118 0>;
|
||||
clocks = <&cmu CLK_I2C5>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_6: i2c@138C0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138C0000 0x100>;
|
||||
interrupts = <0 119 0>;
|
||||
clocks = <&cmu CLK_I2C6>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c_7: i2c@138D0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "samsung,s3c2440-i2c";
|
||||
reg = <0x138D0000 0x100>;
|
||||
interrupts = <0 120 0>;
|
||||
clocks = <&cmu CLK_I2C7>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c7_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_0: spi@13920000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13920000 0x100>;
|
||||
interrupts = <0 121 0>;
|
||||
dmas = <&pdma0 7>, <&pdma0 6>;
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
samsung,spi-src-clk = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
spi_1: spi@13930000 {
|
||||
compatible = "samsung,exynos4210-spi";
|
||||
reg = <0x13930000 0x100>;
|
||||
interrupts = <0 122 0>;
|
||||
dmas = <&pdma1 7>, <&pdma1 6>;
|
||||
dma-names = "tx", "rx";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
|
||||
clock-names = "spi", "spi_busclk0";
|
||||
samsung,spi-src-clk = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi1_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pwm: pwm@139D0000 {
|
||||
compatible = "samsung,exynos4210-pwm";
|
||||
reg = <0x139D0000 0x1000>;
|
||||
interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
|
||||
<0 107 0>, <0 108 0>;
|
||||
#pwm-cells = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a7-pmu";
|
||||
interrupts = <0 18 0>, <0 19 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
#include "exynos3250-pinctrl.dtsi"
|
||||
Loading…
Reference in New Issue
Block a user